Multi-metal hydroxides possess unique physical and chemical properties,making them promising candidates for supercapacitor working electrodes.Enhancing their electrochemical performance can be achieved through a combi...Multi-metal hydroxides possess unique physical and chemical properties,making them promising candidates for supercapacitor working electrodes.Enhancing their electrochemical performance can be achieved through a combination with carbon materials.In this study,we synthesized a composite material by hydrothermally dispersed 4,6,and 10 wt%carbon nanotubes(CNT)into ternary cobaltbismuth-samarium hydroxide(CoBiSm-TOH).These nanocomposites were employed as the material for the working electrode in a supercapacitor.The findings reveal that at 1.5 A/g,the specific capacitance of CNT3@CoBiSm-TOH,using a three-electrode system,was found to be 852.91 F/g,higher than that of CoBi-BOH,CoBiSm-TOH,CNT1@CoBiSm-TOH and CNT5@CoBiSm-TOH-measuring 699.69,750.34,789.54 and 817.79 F/g,respectively.Moreover,CNT3@CoBiSm-TOH electrodes exhibited a capacitance retention of around 88%over 10,000 cycles.To demonstrate practical applicability,CNT3@CoBiSm-TOH was grown on woven carbon fiber(WCF),and a solid-state supercapacitor device was developed using the VARTM(vacuum-assisted resin transfer molding).This device displayed a specific capacitance of 272.67 F/g at 2.25 A/g.Notably,it achieved a maximum energy density of 53.01 Wh/kg at a power density of 750 W/kg and sustained excellent cycle stability over 50,000 cycles,maintaining 70%of its initial capacitance.These results underscore the importance of interfacial nanoengineering and provide crucial insights for the development of future energy storage devices.展开更多
本文采用数字式粘度仪对不同温度和促进剂含量下添加氢氧化铝(ATH)的不饱和聚酯树脂(UPR)的粘度进行测试,然后以获取的实验数据作为参数,对复合材料部件模型用RTM(Resin transfer molding)和VARTM(Vacuum assisted resin transfer moldi...本文采用数字式粘度仪对不同温度和促进剂含量下添加氢氧化铝(ATH)的不饱和聚酯树脂(UPR)的粘度进行测试,然后以获取的实验数据作为参数,对复合材料部件模型用RTM(Resin transfer molding)和VARTM(Vacuum assisted resin transfer molding)两种工艺进行模拟仿真。仿真结果表明,在相同的参数条件和灌注方案下,VARTM工艺的填充时间小于等于RTM工艺的填充时间。当注口大于出口时,VARTM和RTM的填充时间基本相同;当注口小于出口时,VARTM工艺的填充时间要少于RTM工艺的填充时间。展开更多
基金financially supported by 2024 Gyeongbuk Green Environment Support Center。
文摘Multi-metal hydroxides possess unique physical and chemical properties,making them promising candidates for supercapacitor working electrodes.Enhancing their electrochemical performance can be achieved through a combination with carbon materials.In this study,we synthesized a composite material by hydrothermally dispersed 4,6,and 10 wt%carbon nanotubes(CNT)into ternary cobaltbismuth-samarium hydroxide(CoBiSm-TOH).These nanocomposites were employed as the material for the working electrode in a supercapacitor.The findings reveal that at 1.5 A/g,the specific capacitance of CNT3@CoBiSm-TOH,using a three-electrode system,was found to be 852.91 F/g,higher than that of CoBi-BOH,CoBiSm-TOH,CNT1@CoBiSm-TOH and CNT5@CoBiSm-TOH-measuring 699.69,750.34,789.54 and 817.79 F/g,respectively.Moreover,CNT3@CoBiSm-TOH electrodes exhibited a capacitance retention of around 88%over 10,000 cycles.To demonstrate practical applicability,CNT3@CoBiSm-TOH was grown on woven carbon fiber(WCF),and a solid-state supercapacitor device was developed using the VARTM(vacuum-assisted resin transfer molding).This device displayed a specific capacitance of 272.67 F/g at 2.25 A/g.Notably,it achieved a maximum energy density of 53.01 Wh/kg at a power density of 750 W/kg and sustained excellent cycle stability over 50,000 cycles,maintaining 70%of its initial capacitance.These results underscore the importance of interfacial nanoengineering and provide crucial insights for the development of future energy storage devices.
文摘本文采用数字式粘度仪对不同温度和促进剂含量下添加氢氧化铝(ATH)的不饱和聚酯树脂(UPR)的粘度进行测试,然后以获取的实验数据作为参数,对复合材料部件模型用RTM(Resin transfer molding)和VARTM(Vacuum assisted resin transfer molding)两种工艺进行模拟仿真。仿真结果表明,在相同的参数条件和灌注方案下,VARTM工艺的填充时间小于等于RTM工艺的填充时间。当注口大于出口时,VARTM和RTM的填充时间基本相同;当注口小于出口时,VARTM工艺的填充时间要少于RTM工艺的填充时间。
