Understanding the complex deformation mechanisms of non-equimolar multi-principal element alloys(MPEAs)requires high-fidelity atomic-scale simulations.This study develops a deep potential(DP)model to enable molecular ...Understanding the complex deformation mechanisms of non-equimolar multi-principal element alloys(MPEAs)requires high-fidelity atomic-scale simulations.This study develops a deep potential(DP)model to enable molecular dynamics simulations of the Ta_(0.4)Ti_(2)Zr(Ta_(0.4))alloy.Monte Carlo simulations using this potential reveal Ta atom precipitation in the Ta_(0.4)alloy.Under uniaxial tensile loading along the[100]direction in the NPT ensemble,the alloy undergoes a remarkable sequence of phase transformations:an initial body-centered cubic(BCC_(1))to face-centered cubic(FCC)transformation,followed by a reverse transformation from FCC to a distinct BCC phase(BCC_(2)),and finally a BCC_(2) to hexagonal close-packed(HCP)transformation.Critically,the reverse FCC to BCC_(2) transformation induces significant volume contraction.We demonstrate that the inversely transformed BCC_(2) phase primarily accommodates compressive stress.Concurrently,the reorientation of BCC_(2) crystals contributes substantially to the observed high strain hardening.These simulations provide atomic-scale insights into the dynamic structural evolution,sequential phase transformations,and stress partitioning during deformation of the Ta_(0.4)alloy.The developed DP model and the revealed mechanisms offer fundamental theoretical guidance for accelerating the design of high-performance MPEAs.展开更多
It is difficult to recover chrysocolla from sulfidation flotation which is closely related to the mineral surface composition.In this study,the effects of fluoride roasting on the surface composition of chrysocolla we...It is difficult to recover chrysocolla from sulfidation flotation which is closely related to the mineral surface composition.In this study,the effects of fluoride roasting on the surface composition of chrysocolla were investigated,its impact on sulfidation flotation was explored,and the mechanisms involved in both fluoride roasting and sulfidation flotation were discussed.With CaF_(2)as the roasting reagent,Na_(2)S·9H_(2)O as the sulfidation reagent,and sodium butyl xanthate(NaBX)as the collector,the results of the flotation experiments showed that fluoride roasting improved the floatability of chrysocolla,and the recovery rate increased from 16.87%to 82.74%.X-ray diffraction analysis revealed that after fluoride roasting,approximately all the Cu on the chrysocolla surface was exposed in the form of CuO,which could provide a basis for subsequent sulfidation flotation.The microscopy and elemental analyses revealed that large quantities of"pagoda-like"grains were observed on the sulfidation surface of the fluoride-roasted chrysocolla,indicating high crystallinity particles of copper sulfide.This suggests that the effect of sulfide formation on the chrysocolla surface was more pronounced.X-ray photoelectron spectroscopy revealed that fluoride roasting increased the relative contents of sulfur and copper on the surface and that both the Cu~+and polysulfide fractions on the surface of the minerals increased.This enhances the effect of sulfidation,which is conducive to flotation recovery.Therefore,fluoride roasting improved the effect of copper species transformation and sulfidation on the surface of chysocolla,promoted the adsorption of collectors,and improved the recovery of chrysocolla from sulfidation flotation.展开更多
The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them w...The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them was not a typical exhibition hall,but a building shaped like a gleaming stainless-steel cooking pot.展开更多
From lecture halls in Beijing to villages in the mountains of southwest China,a group of young rural innovators from Global South countries recently embarked on a journey that connected policy thinking,technological p...From lecture halls in Beijing to villages in the mountains of southwest China,a group of young rural innovators from Global South countries recently embarked on a journey that connected policy thinking,technological practice and lived rural experience.展开更多
In the context of the digital transformation of vocational education,a quality evaluation index system has been constructed.Based on a questionnaire survey conducted among higher vocational colleges and enterprises in...In the context of the digital transformation of vocational education,a quality evaluation index system has been constructed.Based on a questionnaire survey conducted among higher vocational colleges and enterprises in Hainan Province,it has been found that the quality of vocational education generally depends on the talent training program and professional construction at the macro level.At the meso level,the teacher level and teaching environment are critical,while at the micro level,the evaluation of talent training quality cannot be underestimated.Strategies for quality improvement in vocational education are proposed from the perspectives of talent training programs,major construction,teacher development,teaching environment,and talent training quality,all under the lens of digital transformation.展开更多
Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-...Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.展开更多
基金supported by the National University of Defense Technology Research Fund Projectthe National Natural Science Foundation of China(Grant No.12534013)the Science and Technology Innovation Program of Hunan Province(Grant Nos.2025ZYJ001 and 2021RC4026)。
文摘Understanding the complex deformation mechanisms of non-equimolar multi-principal element alloys(MPEAs)requires high-fidelity atomic-scale simulations.This study develops a deep potential(DP)model to enable molecular dynamics simulations of the Ta_(0.4)Ti_(2)Zr(Ta_(0.4))alloy.Monte Carlo simulations using this potential reveal Ta atom precipitation in the Ta_(0.4)alloy.Under uniaxial tensile loading along the[100]direction in the NPT ensemble,the alloy undergoes a remarkable sequence of phase transformations:an initial body-centered cubic(BCC_(1))to face-centered cubic(FCC)transformation,followed by a reverse transformation from FCC to a distinct BCC phase(BCC_(2)),and finally a BCC_(2) to hexagonal close-packed(HCP)transformation.Critically,the reverse FCC to BCC_(2) transformation induces significant volume contraction.We demonstrate that the inversely transformed BCC_(2) phase primarily accommodates compressive stress.Concurrently,the reorientation of BCC_(2) crystals contributes substantially to the observed high strain hardening.These simulations provide atomic-scale insights into the dynamic structural evolution,sequential phase transformations,and stress partitioning during deformation of the Ta_(0.4)alloy.The developed DP model and the revealed mechanisms offer fundamental theoretical guidance for accelerating the design of high-performance MPEAs.
基金financially supported by the National Natural Science Foundation of China(No.52374259)the Open Fund of the State Key Laboratory of Mineral Processing Science and Technology,China(No.BGRIMM-KJSKL-2023-11)the Major Science and Technology Projects in Yunnan Province,China(No.202302 AF080004)。
文摘It is difficult to recover chrysocolla from sulfidation flotation which is closely related to the mineral surface composition.In this study,the effects of fluoride roasting on the surface composition of chrysocolla were investigated,its impact on sulfidation flotation was explored,and the mechanisms involved in both fluoride roasting and sulfidation flotation were discussed.With CaF_(2)as the roasting reagent,Na_(2)S·9H_(2)O as the sulfidation reagent,and sodium butyl xanthate(NaBX)as the collector,the results of the flotation experiments showed that fluoride roasting improved the floatability of chrysocolla,and the recovery rate increased from 16.87%to 82.74%.X-ray diffraction analysis revealed that after fluoride roasting,approximately all the Cu on the chrysocolla surface was exposed in the form of CuO,which could provide a basis for subsequent sulfidation flotation.The microscopy and elemental analyses revealed that large quantities of"pagoda-like"grains were observed on the sulfidation surface of the fluoride-roasted chrysocolla,indicating high crystallinity particles of copper sulfide.This suggests that the effect of sulfide formation on the chrysocolla surface was more pronounced.X-ray photoelectron spectroscopy revealed that fluoride roasting increased the relative contents of sulfur and copper on the surface and that both the Cu~+and polysulfide fractions on the surface of the minerals increased.This enhances the effect of sulfidation,which is conducive to flotation recovery.Therefore,fluoride roasting improved the effect of copper species transformation and sulfidation on the surface of chysocolla,promoted the adsorption of collectors,and improved the recovery of chrysocolla from sulfidation flotation.
文摘The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them was not a typical exhibition hall,but a building shaped like a gleaming stainless-steel cooking pot.
文摘From lecture halls in Beijing to villages in the mountains of southwest China,a group of young rural innovators from Global South countries recently embarked on a journey that connected policy thinking,technological practice and lived rural experience.
文摘In the context of the digital transformation of vocational education,a quality evaluation index system has been constructed.Based on a questionnaire survey conducted among higher vocational colleges and enterprises in Hainan Province,it has been found that the quality of vocational education generally depends on the talent training program and professional construction at the macro level.At the meso level,the teacher level and teaching environment are critical,while at the micro level,the evaluation of talent training quality cannot be underestimated.Strategies for quality improvement in vocational education are proposed from the perspectives of talent training programs,major construction,teacher development,teaching environment,and talent training quality,all under the lens of digital transformation.
基金financially supported by the National Key Re-search and Development Program of China(No.2021YFB3702604)the National Natural Science Foundation of China(No.52174377)+1 种基金the Chongqing Natural Science Foundation Project(No.CSTB2023NSCQ-MSX0824)This work was also supported by the Shaanxi Materials Analysis&Research Center and the Analytical&Testing Center of NPU.
文摘Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.
