Under strong earthquakes, long-span spatial latticed structures may collapse due to dynamic instability or strength failure. The elasto-plastic dynamic behaviors of three spatial latticed structures, including two dou...Under strong earthquakes, long-span spatial latticed structures may collapse due to dynamic instability or strength failure. The elasto-plastic dynamic behaviors of three spatial latticed structures, including two double-layer cylindrical shells and one spherical shell constructed for the 2008 Olympic Games in Beijing, were quantitatively examined under multi-support excitation （MSE） and uniform support excitation （USE）. In the numerical analyses, several important parameters were investigated such as the peak acceleration and displacement responses at key joints, the number and distribution of plastic members, and the deformation of the shell at the moment of collapse. Analysis results reveal the features and the failure mechanism of the spatial latticed structures under MSE and USE. In both scenarios, the double-layer reticulated shell collapses in the ＂overflow＂ mode, and the collapse is governed by the number of invalid plastic members rather than the total number of plastic members, beginning with damage to some of the local regions near the supports. By comparing the numbers and distributions of the plastic members under MSE to those under USE, it was observed that the plastic members spread more sufficiently and the internal forces are more uniform under MSE, especially in cases of lower apparent velocities in soils. Due to the effects of pseudo-static displacement, the stresses in the members near the supports under MSE are higher than those under USE.展开更多
It is desirable to get a uniform load distribution for the pressure rollers of the mangle.In thispaper,the load uniforming principle of the axially-staggered pressure rollers and the rules for theroller design have be...It is desirable to get a uniform load distribution for the pressure rollers of the mangle.In thispaper,the load uniforming principle of the axially-staggered pressure rollers and the rules for theroller design have been analysed by the theory of bending of beams.The ratio of maximum tominimum value of the distributed load in the nip being taken as a useful index to describe the uni-formity of the load distribution,the performance of the so-called load-uniforming pressure rollerswith rubber covering,under various operation conditions,has been evaluated.As a result,it isproved that the load-uniforming pressure rollers with axially-staggered contact is a pratically use-ful means of uniformizing the load distribution,which ensures that the mangle will squeeze the ma-terial to be processed uniformly over its whole width under any technological load,and needs onlysome simple regulations.The conclusions obtained in this paper can easily be extended to the pressure rollers with anysupport conditions.展开更多
Suppose that {b(n)} and {c(n)} are two positive sequences. Let F({b(n)}, {c(n)}) = {f(z) : f(z) is analytic in \z\ < 1, f(z) = z - Sigma(n=2)(+infinity) a(n)z(n), a(n) greater than or equal to 0, Sigma(n=2)(+infini...Suppose that {b(n)} and {c(n)} are two positive sequences. Let F({b(n)}, {c(n)}) = {f(z) : f(z) is analytic in \z\ < 1, f(z) = z - Sigma(n=2)(+infinity) a(n)z(n), a(n) greater than or equal to 0, Sigma(n=2)(+infinity) b(n)a(n) less than or equal to 1 and Sigma(n=2)(+infinity) c(n)a(n) less than or equal to 1}. This article obtains the extreme points and support points of F({b(n)}, {c(n)}).展开更多
The data topology structure of uniform experiment design (UD) is too complex to be reasonable regressed. In this paper, the principle and method of distinguish the training data and testing data were described to make...The data topology structure of uniform experiment design (UD) is too complex to be reasonable regressed. In this paper, the principle and method of distinguish the training data and testing data were described to make a reasonable regression when uniform experiment design combined with support vector regression (SVR). Two equivalent ways which were the smallest enclosing hypersphere perceptron (SEH) and the enclosing simplex perceptron (ES) were provided to discover the topology relationship of the process parameter datum. To give an application, a series of experiments about laser cladding layer quality were conducted by UD to get the relationship of load, velocity and wearing capacity. Results showed that only the testing datum recommended by the two perceptrons got a good forecasting by SVR. Therefore, the two perceptrons could guide experiments with process parameter data of complex topology structure. Further, the application could be extended over a much wider field of experiments.展开更多
By the author denotes the areal measure on the unit disk . Let H'p = {f(z): f(z) is analytic in D and . Let B H 'p and. This article researches the support points and extreme points of B(H'p).
文摘Under strong earthquakes, long-span spatial latticed structures may collapse due to dynamic instability or strength failure. The elasto-plastic dynamic behaviors of three spatial latticed structures, including two double-layer cylindrical shells and one spherical shell constructed for the 2008 Olympic Games in Beijing, were quantitatively examined under multi-support excitation （MSE） and uniform support excitation （USE）. In the numerical analyses, several important parameters were investigated such as the peak acceleration and displacement responses at key joints, the number and distribution of plastic members, and the deformation of the shell at the moment of collapse. Analysis results reveal the features and the failure mechanism of the spatial latticed structures under MSE and USE. In both scenarios, the double-layer reticulated shell collapses in the ＂overflow＂ mode, and the collapse is governed by the number of invalid plastic members rather than the total number of plastic members, beginning with damage to some of the local regions near the supports. By comparing the numbers and distributions of the plastic members under MSE to those under USE, it was observed that the plastic members spread more sufficiently and the internal forces are more uniform under MSE, especially in cases of lower apparent velocities in soils. Due to the effects of pseudo-static displacement, the stresses in the members near the supports under MSE are higher than those under USE.
文摘It is desirable to get a uniform load distribution for the pressure rollers of the mangle.In thispaper,the load uniforming principle of the axially-staggered pressure rollers and the rules for theroller design have been analysed by the theory of bending of beams.The ratio of maximum tominimum value of the distributed load in the nip being taken as a useful index to describe the uni-formity of the load distribution,the performance of the so-called load-uniforming pressure rollerswith rubber covering,under various operation conditions,has been evaluated.As a result,it isproved that the load-uniforming pressure rollers with axially-staggered contact is a pratically use-ful means of uniformizing the load distribution,which ensures that the mangle will squeeze the ma-terial to be processed uniformly over its whole width under any technological load,and needs onlysome simple regulations.The conclusions obtained in this paper can easily be extended to the pressure rollers with anysupport conditions.
文摘Suppose that {b(n)} and {c(n)} are two positive sequences. Let F({b(n)}, {c(n)}) = {f(z) : f(z) is analytic in \z\ < 1, f(z) = z - Sigma(n=2)(+infinity) a(n)z(n), a(n) greater than or equal to 0, Sigma(n=2)(+infinity) b(n)a(n) less than or equal to 1 and Sigma(n=2)(+infinity) c(n)a(n) less than or equal to 1}. This article obtains the extreme points and support points of F({b(n)}, {c(n)}).
文摘The data topology structure of uniform experiment design (UD) is too complex to be reasonable regressed. In this paper, the principle and method of distinguish the training data and testing data were described to make a reasonable regression when uniform experiment design combined with support vector regression (SVR). Two equivalent ways which were the smallest enclosing hypersphere perceptron (SEH) and the enclosing simplex perceptron (ES) were provided to discover the topology relationship of the process parameter datum. To give an application, a series of experiments about laser cladding layer quality were conducted by UD to get the relationship of load, velocity and wearing capacity. Results showed that only the testing datum recommended by the two perceptrons got a good forecasting by SVR. Therefore, the two perceptrons could guide experiments with process parameter data of complex topology structure. Further, the application could be extended over a much wider field of experiments.
文摘By the author denotes the areal measure on the unit disk . Let H'p = {f(z): f(z) is analytic in D and . Let B H 'p and. This article researches the support points and extreme points of B(H'p).
