The characteristic of phosphorus removal andappropriate change of the traditional operation modes wereinvestigated in UniFed sequencing batch reactor (SBR)laboratory-scale apparatus (40 L), treating actual domesticwas...The characteristic of phosphorus removal andappropriate change of the traditional operation modes wereinvestigated in UniFed sequencing batch reactor (SBR)laboratory-scale apparatus (40 L), treating actual domesticwastewater with low ratios of C/N (2.57) and C/P (30.18),providing theoretical basis for actual application ofwastewater treatment plant. UniFed SBR system with itsunique operation mode had the distinct superiority ofphosphorus removal. On this occasion, the effect ofvolumetric exchange ratio (VER) and the method ofinfluent introduction for phosphorus removal were studied.When the carbon source became the limiting factor tophosphorus release, the higher the VER, the lower thephosphorus concentration in the effluent. Three differentinfluent patterns, including one-time filling, four-timefilling, and continuous filling with the same quantity ofwastewater could increase the release rate of anaerobicphosphorus from 0.082 to 0.143 mg·P·(L·min)-1. Appropriatechange of the traditional operation modes couldoptimize the efficiency of phosphorus removal. When thefeed/ decant time was extended from 2 h to 4 h, thephosphorous removal efficiency increased from 59.93% to88.45% without any external carbon source. In the mode ofalternation of anoxic-aerobic (A/O) condition, phosphorousremoval efficiency increased from 55.07% to 72.27%clearly. The carbon source in the influent can be usedadequately, and denitrifying phosphorus removal wascarried out in anoxic stage 2 (A2). This mode was optimalfor the treatment of actual domestic wastewater with lowC/N and C/P ratios.展开更多
Based on the coalbed methane(CBM)/coal-rock gas(CRG)geological,geophysical,and experimental testing data from the Daji block in the Ordos Basin,the coal-forming and hydrocarbon generation&accumulation characterist...Based on the coalbed methane(CBM)/coal-rock gas(CRG)geological,geophysical,and experimental testing data from the Daji block in the Ordos Basin,the coal-forming and hydrocarbon generation&accumulation characteristics across different zones were dissected,and the key factors controlling the differential CBM/CRG enrichment were identified.The No.8 coal seam of the Carboniferous Benxi Formation in the Daji block is 8-10 m thick,typically overlain by limestone.The primary hydrocarbon generation phase occurred during the Early Cretaceous.Based on the differences in tectonic evolution and CRG occurrence,and with the maximum vitrinite reflectance of 2.0%and burial depth of 1800 m as boundaries,the study area is divided into deeply buried and deeply preserved,deeply buried and shallowly preserved,and shallowly buried and shallowly preserved zones.The deeply buried and deeply preserved zone contains gas content of 22-35 m^(3)/t,adsorbed gas saturation of 95%-100%,and formation water with total dissolved solid(TDS)higher than 50000 mg/L.This zone features structural stability and strong sealing capacity,with high gas production rates.The deeply buried and shallowly preserved zone contains gas content of 16-20 m^(3)/t,adsorbed gas saturation of 80%-95%,and formation water with TDS of 5000-50000 mg/L.This zone exhibits localized structural modification and hydrodynamic sealing,with moderate gas production rate.The shallowly buried and shallowly preserved zone contains gas content of 8-16 m^(3)/t,adsorbed gas saturation of 50%-70%,and formation water with TDS lower than 5000 mg/L.This zone experienced intense uplift,resulting in poor sealing and secondary alteration of the primary gas reservoir,with partial adsorbed gas loss,and low gas production rate.A depositional unification and structural divergence model is proposed,that is,although coal seams across the basin experienced broadly similar depositional and tectonic histories,differences in tectonic intensity have led to spatial heterogeneity in the maximum burial depth(i.e.,thermal maturity of coal)and current burial depth and occurrence of CRG(i.e.,gas content and occurrence state).The research results provide valuable guidance for advancing the theoretical understanding of CBM/CRG enrichment and for improving exploration and development practices.展开更多
The Mexican mural movement,also known as Mexican muralism,is recognized as one of the most significant art movements of the 20th century.It developed in the aftermath of the Mexican Revolution,which took place between...The Mexican mural movement,also known as Mexican muralism,is recognized as one of the most significant art movements of the 20th century.It developed in the aftermath of the Mexican Revolution,which took place between 1910 and 1920.The country was striving to rebuild and unify after years of conflict,and muralism became a powerful tool for this transformation.展开更多
Highly accurate international height reference frames with long-term stability,global consistency,and homogeneity are crucial for monitoring sea level variations,understanding climate change,managing disasters,and sup...Highly accurate international height reference frames with long-term stability,global consistency,and homogeneity are crucial for monitoring sea level variations,understanding climate change,managing disasters,and supporting other applications that benefit scientific research and societal well-being.Currently,there are over 100 local height reference systems worldwide.Unifying these systems is a pivotal step toward constructing international height reference frames.The method introduced in this study-the gravity frequency shift via Satellite Frequency Signal Transfer(SFST)-represents a groundbreaking relativistic geodetic approach,demonstrating its potential to surpass the constraints of conventional techniques.The advent of high-precision optical atomic clocks(OAC)with an accuracy level of 1×10^(-18) has facilitated this method's implementation.The International Association of Geodesy(IAG)has established the International Height Reference System(IHRS)and its practical realization,the International Height Reference Frame(IHRF).Our study focuses on two neighbouring height systems:the China Height System(CHS)and the Nepal Height System(NHS),separated by the Himalayas and the Xizang plateau.We aim to unify these two systems by determining the geopotential and orthometric height differences between their respective height datum stations:the Qingdao Height Datum Station(QHDS)and the Madar Height Datum Station(MHDS)using a simulation experiment with the method mentioned above.Using an OAC with an accuracy of 1×10^(-18),we identified a geopotential difference of-8.348±0.464 m^(2)s^(-2) and an orthometric height difference of 0.786±0.047 m between QHDS and MHDS.These results suggest that the introduced method could unify any two height systems with fewcentimeter-level precision,emphasizing its significance in contributing to the construction of the IHRS/IHRF with today's required precision.In summary,the SFST technique is a novel geodetic method that offers an alternative for height system unification,delivering centimeter-level precision,surpassing traditional methods,and supporting the development of the IHRF.展开更多
Complex Field Theory (CFT) proposes that dark matter (DM) and dark energy (DE) are pervasive, complex fields of charged complex masses of equally positive and negative complex charges, respectively. It proposes that e...Complex Field Theory (CFT) proposes that dark matter (DM) and dark energy (DE) are pervasive, complex fields of charged complex masses of equally positive and negative complex charges, respectively. It proposes that each material object, including living creatures, is concomitant with a fraction of the charged complex masses of DM and DE in proportion to its mass. This perception provides new insights into the physics of nature and its constituents from subatomic to cosmic scales. This complex nature of DM and DE explains our inability to see DM or harvest DE for the last several decades. The positive complex DM is responsible for preserving the integrity of galaxies and all material systems. The negative complex charged DE induces a positive repelling force with the positively charged DM and contributes to the universe’s expansion. Both fields are Lorentz invariants in all directions and entangle the whole universe. The paper uses CFT to investigate zero-point energy, particle-wave duality, relativistic mass increase, and entanglement phenomenon and unifies Coulomb’s and Newton’s laws. The paper also verifies the existence of tachyons and explains the spooky action of quantum mechanics at a distance. The paper encourages further research into how CFT might resolve several physical mysteries in physics.展开更多
This paper presents a mathematical model for components/parts unification (CPU) policy. This model considers two components/parts that are functionally interchangeable but purchased from suppliers with different price...This paper presents a mathematical model for components/parts unification (CPU) policy. This model considers two components/parts that are functionally interchangeable but purchased from suppliers with different prices and quality characteristics. Because of the buyer's quality preference and suppliers' discount rates for bulky purchases, the model assists the procurement manager to determine how best to purchase the components/parts to meet its demand while minimizing the total acquisition costs.展开更多
This paper elaborated the special geological conditions of Chongqing City and the characteristics of urban bridges formed by natural environment, and put forth the ecological landscape design ideas of urban bridges. 3...This paper elaborated the special geological conditions of Chongqing City and the characteristics of urban bridges formed by natural environment, and put forth the ecological landscape design ideas of urban bridges. 3 principles of ecological landscape design were presented including paying attention to the creation of great environment, focusing on the comparison and harmony between natural and artificial factors and seeking for simple lines and unified colors, and the application of ecological landscape design principles in constructing ecological landscape of bridges in Chongqing City was analyzed. By discussing the existing problems of ecological landscape design of bridges in Chongqing City, some suggestions were summarized, which were expected to produce positive effects for the researches of ecological landscape design of bridges.展开更多
Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from ...Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.展开更多
The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening proces...The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening process and clear- ly reveal the principle of the multi-roller straightening process. The principle can be described as~ the initial curva- tures are reduced by several times anti-bendingl meanwhile the initial curvature differences are diminished and the residual curvatures are unified~ finally, the member after curvature unification is straightened by the last anti-ben- ding. With the plastic region ratios becoming larger, the initial curvatures are more easily unified in straightening process. Based on the plastic region ratios and the required number of roller systems for unifying the initial curva- tures, the large deformation straightening strategy and the small deformation straightening strategy are redefined. The new definition provides an important theoretical basis for setting reliable reduction rules. Through the theoretical analysis results, a new straightener design philosophy is proposed to improve the straightening quality and further increase the adjustment precision as well as the flexibility of the last roller system. The adjustable end roller emerges as the times required, achieving a good effect in practical application.展开更多
A multi-point flexible straightening process characterized by reciprocating bending is proposed.Specifically,the process is analyzed in terms of deformation mechanism and verified by numerical simulations and physical...A multi-point flexible straightening process characterized by reciprocating bending is proposed.Specifically,the process is analyzed in terms of deformation mechanism and verified by numerical simulations and physical experiments of the straightening of a series of metal profiles with different materials and initial shapes.Further,the relationship between the bending radius and the times of reciprocating bending required to unify the curvature is discussed,and the distribution of residual stress after straightening is analyzed.The results show that the reciprocating bending process can eliminate the difference of the initial curvature,make the curvature of each section tend to be uniform;the times of reciprocating bending to reach the uniform curvature decreases with the decrease of bending radius.The straightness of the straightened profile obtained from the experiment and simulation is less than 0.2%,demonstrating a good feasibility of this method.展开更多
True color image city map is a sort of new-style map which combines the high resolution image and map symbols and shows both advantages in visualization. At the same time, the map unification and harmonization should ...True color image city map is a sort of new-style map which combines the high resolution image and map symbols and shows both advantages in visualization. At the same time, the map unification and harmonization should be taken into account dur-ing the design process, since some visual conflicts appear when map symbols overlaid on the true color image. The objective of this research is to explore the rules in the process of true color image city map design based on chromatic and aesthetic knowledge. At the end, taking the Image Atlas of Guangzhou as an example, image color adjustment, road network presentation, and symbol de-signing issues will be discussed in the application.展开更多
基金This work was supported by the Joint Research Fund for Overseas Natural Science Foundation of China(Grant No.50628808)State Key Laboratory of Urban Water Resource and Environment(HIT)(No.QAK200802)Academic Human Resources Development in Institutions of Higher Learning Under the Jurisdiction of Beijing Municipality(No.PHR20090502)。
文摘The characteristic of phosphorus removal andappropriate change of the traditional operation modes wereinvestigated in UniFed sequencing batch reactor (SBR)laboratory-scale apparatus (40 L), treating actual domesticwastewater with low ratios of C/N (2.57) and C/P (30.18),providing theoretical basis for actual application ofwastewater treatment plant. UniFed SBR system with itsunique operation mode had the distinct superiority ofphosphorus removal. On this occasion, the effect ofvolumetric exchange ratio (VER) and the method ofinfluent introduction for phosphorus removal were studied.When the carbon source became the limiting factor tophosphorus release, the higher the VER, the lower thephosphorus concentration in the effluent. Three differentinfluent patterns, including one-time filling, four-timefilling, and continuous filling with the same quantity ofwastewater could increase the release rate of anaerobicphosphorus from 0.082 to 0.143 mg·P·(L·min)-1. Appropriatechange of the traditional operation modes couldoptimize the efficiency of phosphorus removal. When thefeed/ decant time was extended from 2 h to 4 h, thephosphorous removal efficiency increased from 59.93% to88.45% without any external carbon source. In the mode ofalternation of anoxic-aerobic (A/O) condition, phosphorousremoval efficiency increased from 55.07% to 72.27%clearly. The carbon source in the influent can be usedadequately, and denitrifying phosphorus removal wascarried out in anoxic stage 2 (A2). This mode was optimalfor the treatment of actual domestic wastewater with lowC/N and C/P ratios.
基金Supported by the China National Science and Technology Major Project(2025ZD1405700)CNPC Science and Technology Project(2023YQX20117).
文摘Based on the coalbed methane(CBM)/coal-rock gas(CRG)geological,geophysical,and experimental testing data from the Daji block in the Ordos Basin,the coal-forming and hydrocarbon generation&accumulation characteristics across different zones were dissected,and the key factors controlling the differential CBM/CRG enrichment were identified.The No.8 coal seam of the Carboniferous Benxi Formation in the Daji block is 8-10 m thick,typically overlain by limestone.The primary hydrocarbon generation phase occurred during the Early Cretaceous.Based on the differences in tectonic evolution and CRG occurrence,and with the maximum vitrinite reflectance of 2.0%and burial depth of 1800 m as boundaries,the study area is divided into deeply buried and deeply preserved,deeply buried and shallowly preserved,and shallowly buried and shallowly preserved zones.The deeply buried and deeply preserved zone contains gas content of 22-35 m^(3)/t,adsorbed gas saturation of 95%-100%,and formation water with total dissolved solid(TDS)higher than 50000 mg/L.This zone features structural stability and strong sealing capacity,with high gas production rates.The deeply buried and shallowly preserved zone contains gas content of 16-20 m^(3)/t,adsorbed gas saturation of 80%-95%,and formation water with TDS of 5000-50000 mg/L.This zone exhibits localized structural modification and hydrodynamic sealing,with moderate gas production rate.The shallowly buried and shallowly preserved zone contains gas content of 8-16 m^(3)/t,adsorbed gas saturation of 50%-70%,and formation water with TDS lower than 5000 mg/L.This zone experienced intense uplift,resulting in poor sealing and secondary alteration of the primary gas reservoir,with partial adsorbed gas loss,and low gas production rate.A depositional unification and structural divergence model is proposed,that is,although coal seams across the basin experienced broadly similar depositional and tectonic histories,differences in tectonic intensity have led to spatial heterogeneity in the maximum burial depth(i.e.,thermal maturity of coal)and current burial depth and occurrence of CRG(i.e.,gas content and occurrence state).The research results provide valuable guidance for advancing the theoretical understanding of CBM/CRG enrichment and for improving exploration and development practices.
文摘The Mexican mural movement,also known as Mexican muralism,is recognized as one of the most significant art movements of the 20th century.It developed in the aftermath of the Mexican Revolution,which took place between 1910 and 1920.The country was striving to rebuild and unify after years of conflict,and muralism became a powerful tool for this transformation.
基金the National Natural Science Foundation of China(NSFC)(Grant Nos.42030105,42274011,42074019,41974034,42204006)。
文摘Highly accurate international height reference frames with long-term stability,global consistency,and homogeneity are crucial for monitoring sea level variations,understanding climate change,managing disasters,and supporting other applications that benefit scientific research and societal well-being.Currently,there are over 100 local height reference systems worldwide.Unifying these systems is a pivotal step toward constructing international height reference frames.The method introduced in this study-the gravity frequency shift via Satellite Frequency Signal Transfer(SFST)-represents a groundbreaking relativistic geodetic approach,demonstrating its potential to surpass the constraints of conventional techniques.The advent of high-precision optical atomic clocks(OAC)with an accuracy level of 1×10^(-18) has facilitated this method's implementation.The International Association of Geodesy(IAG)has established the International Height Reference System(IHRS)and its practical realization,the International Height Reference Frame(IHRF).Our study focuses on two neighbouring height systems:the China Height System(CHS)and the Nepal Height System(NHS),separated by the Himalayas and the Xizang plateau.We aim to unify these two systems by determining the geopotential and orthometric height differences between their respective height datum stations:the Qingdao Height Datum Station(QHDS)and the Madar Height Datum Station(MHDS)using a simulation experiment with the method mentioned above.Using an OAC with an accuracy of 1×10^(-18),we identified a geopotential difference of-8.348±0.464 m^(2)s^(-2) and an orthometric height difference of 0.786±0.047 m between QHDS and MHDS.These results suggest that the introduced method could unify any two height systems with fewcentimeter-level precision,emphasizing its significance in contributing to the construction of the IHRS/IHRF with today's required precision.In summary,the SFST technique is a novel geodetic method that offers an alternative for height system unification,delivering centimeter-level precision,surpassing traditional methods,and supporting the development of the IHRF.
文摘Complex Field Theory (CFT) proposes that dark matter (DM) and dark energy (DE) are pervasive, complex fields of charged complex masses of equally positive and negative complex charges, respectively. It proposes that each material object, including living creatures, is concomitant with a fraction of the charged complex masses of DM and DE in proportion to its mass. This perception provides new insights into the physics of nature and its constituents from subatomic to cosmic scales. This complex nature of DM and DE explains our inability to see DM or harvest DE for the last several decades. The positive complex DM is responsible for preserving the integrity of galaxies and all material systems. The negative complex charged DE induces a positive repelling force with the positively charged DM and contributes to the universe’s expansion. Both fields are Lorentz invariants in all directions and entangle the whole universe. The paper uses CFT to investigate zero-point energy, particle-wave duality, relativistic mass increase, and entanglement phenomenon and unifies Coulomb’s and Newton’s laws. The paper also verifies the existence of tachyons and explains the spooky action of quantum mechanics at a distance. The paper encourages further research into how CFT might resolve several physical mysteries in physics.
文摘This paper presents a mathematical model for components/parts unification (CPU) policy. This model considers two components/parts that are functionally interchangeable but purchased from suppliers with different prices and quality characteristics. Because of the buyer's quality preference and suppliers' discount rates for bulky purchases, the model assists the procurement manager to determine how best to purchase the components/parts to meet its demand while minimizing the total acquisition costs.
文摘This paper elaborated the special geological conditions of Chongqing City and the characteristics of urban bridges formed by natural environment, and put forth the ecological landscape design ideas of urban bridges. 3 principles of ecological landscape design were presented including paying attention to the creation of great environment, focusing on the comparison and harmony between natural and artificial factors and seeking for simple lines and unified colors, and the application of ecological landscape design principles in constructing ecological landscape of bridges in Chongqing City was analyzed. By discussing the existing problems of ecological landscape design of bridges in Chongqing City, some suggestions were summarized, which were expected to produce positive effects for the researches of ecological landscape design of bridges.
基金National Key Scientific Instrument and Equipment Development Project(No.2013YQ170539)
文摘Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.
基金Item Sponsored by National Natural Science Foundation of China(51178452)
文摘The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening process and clear- ly reveal the principle of the multi-roller straightening process. The principle can be described as~ the initial curva- tures are reduced by several times anti-bendingl meanwhile the initial curvature differences are diminished and the residual curvatures are unified~ finally, the member after curvature unification is straightened by the last anti-ben- ding. With the plastic region ratios becoming larger, the initial curvatures are more easily unified in straightening process. Based on the plastic region ratios and the required number of roller systems for unifying the initial curva- tures, the large deformation straightening strategy and the small deformation straightening strategy are redefined. The new definition provides an important theoretical basis for setting reliable reduction rules. Through the theoretical analysis results, a new straightener design philosophy is proposed to improve the straightening quality and further increase the adjustment precision as well as the flexibility of the last roller system. The adjustable end roller emerges as the times required, achieving a good effect in practical application.
基金financially supported by the National Natural Science Foundation of China(No.52005431)the National Natural Science Foundation of Hebei Province,China(No.E2020203086)the National Major Science and Technology Project of China(No.2018ZX04007002).
文摘A multi-point flexible straightening process characterized by reciprocating bending is proposed.Specifically,the process is analyzed in terms of deformation mechanism and verified by numerical simulations and physical experiments of the straightening of a series of metal profiles with different materials and initial shapes.Further,the relationship between the bending radius and the times of reciprocating bending required to unify the curvature is discussed,and the distribution of residual stress after straightening is analyzed.The results show that the reciprocating bending process can eliminate the difference of the initial curvature,make the curvature of each section tend to be uniform;the times of reciprocating bending to reach the uniform curvature decreases with the decrease of bending radius.The straightness of the straightened profile obtained from the experiment and simulation is less than 0.2%,demonstrating a good feasibility of this method.
文摘True color image city map is a sort of new-style map which combines the high resolution image and map symbols and shows both advantages in visualization. At the same time, the map unification and harmonization should be taken into account dur-ing the design process, since some visual conflicts appear when map symbols overlaid on the true color image. The objective of this research is to explore the rules in the process of true color image city map design based on chromatic and aesthetic knowledge. At the end, taking the Image Atlas of Guangzhou as an example, image color adjustment, road network presentation, and symbol de-signing issues will be discussed in the application.
