In this work, a two-photon polymerization(2PP) processing device was built using the femtosecond laser, and femtosecond laser direct writing was performed on SU-8 photoresist. Due to the 2PP effect of the photoresist ...In this work, a two-photon polymerization(2PP) processing device was built using the femtosecond laser, and femtosecond laser direct writing was performed on SU-8 photoresist. Due to the 2PP effect of the photoresist caused by the femtosecond laser, the polymeric line with size less than the focal spot size is obtained. Based on the Raman spectroscopy characterization of SU-8 polymer before and after 2PP, we research the dynamic process of femtosecond laser induced 2PP. In Raman spectra, some scattering peaks with large intensity variation, such as 1 108 cm^(-1) and 1 183 cm^(-1), indicate that the asymmetric stretching vibration of C-O-C bond in SU-8 polymer is increased. By comparison, we can find that 2PP only affects the light absorption of initiator, but does not affect the monomer polymerization. It is helpful to understand the interaction of photoresist and femtosecond laser, and plays an important role in quantitatively controlling the polymerization degree of SU-8 polymer and improving the processing resolution of 2PP.展开更多
Tissue engineering(TE)continues to be widely explored as a potential solution to meet critical clinical needs for diseased tissue replacement and tissue regeneration.In this study,we developed a poly(2-hydroxyethyl me...Tissue engineering(TE)continues to be widely explored as a potential solution to meet critical clinical needs for diseased tissue replacement and tissue regeneration.In this study,we developed a poly(2-hydroxyethyl methacrylate-co-methacrylic acid)(pHEMA-co-MAA)based hydrogel loaded with newly synthesized conductive poly(3,4-ethylene-dioxythiophene)(PEDOT)and polypyrrole(PPy)nanoparticles(NPs),and subsequently processed these hydrogels into tissue engineered constructs via three-dimensional(3D)printing.The presence of the NPs was critical as they altered the rheological properties during printing.However,all samples exhibited suitable shear thinning properties,allowing for the development of an optimized processing window for 3D printing.Samples were 3D printed into pre-determined disk-shaped configurations of 2 and 10 mm in height and diameter,respectively.We observed that the NPs disrupted the gel crosslinking efficiencies,leading to shorter degradation times and compressive mechanical properties ranging between 450 and 550 kPa.The conductivity of the printed hydrogels increased along with the NP concentration to(5.10±0.37)×10^(−7)S/cm.In vitro studies with cortical astrocyte cell cultures demonstrated that exposure to the pHEMA-co-MAA NP hydrogels yielded high cellular viability and proliferation rates.Finally,hydrogel antimicrobial studies with staphylococcus epidermidis bacteria revealed that the developed hydrogels affected bacterial growth.Taken together,these materials show promise for various TE strategies.展开更多
基金supported by the National Basic Research Program of China(No.2010CB934101)the National Natural Science Foundation of China(No.11404173)
文摘In this work, a two-photon polymerization(2PP) processing device was built using the femtosecond laser, and femtosecond laser direct writing was performed on SU-8 photoresist. Due to the 2PP effect of the photoresist caused by the femtosecond laser, the polymeric line with size less than the focal spot size is obtained. Based on the Raman spectroscopy characterization of SU-8 polymer before and after 2PP, we research the dynamic process of femtosecond laser induced 2PP. In Raman spectra, some scattering peaks with large intensity variation, such as 1 108 cm^(-1) and 1 183 cm^(-1), indicate that the asymmetric stretching vibration of C-O-C bond in SU-8 polymer is increased. By comparison, we can find that 2PP only affects the light absorption of initiator, but does not affect the monomer polymerization. It is helpful to understand the interaction of photoresist and femtosecond laser, and plays an important role in quantitatively controlling the polymerization degree of SU-8 polymer and improving the processing resolution of 2PP.
基金research conducted with the financial support of Science Foundation Ireland under the SFI Research Infrastructure Programme (21/RI/9831)the funding provided by the Irish Research Council through the Irish Research Council Enterprise Partnership Scheme with Johnson and Johnson (EPSPG/2020/78)
文摘Tissue engineering(TE)continues to be widely explored as a potential solution to meet critical clinical needs for diseased tissue replacement and tissue regeneration.In this study,we developed a poly(2-hydroxyethyl methacrylate-co-methacrylic acid)(pHEMA-co-MAA)based hydrogel loaded with newly synthesized conductive poly(3,4-ethylene-dioxythiophene)(PEDOT)and polypyrrole(PPy)nanoparticles(NPs),and subsequently processed these hydrogels into tissue engineered constructs via three-dimensional(3D)printing.The presence of the NPs was critical as they altered the rheological properties during printing.However,all samples exhibited suitable shear thinning properties,allowing for the development of an optimized processing window for 3D printing.Samples were 3D printed into pre-determined disk-shaped configurations of 2 and 10 mm in height and diameter,respectively.We observed that the NPs disrupted the gel crosslinking efficiencies,leading to shorter degradation times and compressive mechanical properties ranging between 450 and 550 kPa.The conductivity of the printed hydrogels increased along with the NP concentration to(5.10±0.37)×10^(−7)S/cm.In vitro studies with cortical astrocyte cell cultures demonstrated that exposure to the pHEMA-co-MAA NP hydrogels yielded high cellular viability and proliferation rates.Finally,hydrogel antimicrobial studies with staphylococcus epidermidis bacteria revealed that the developed hydrogels affected bacterial growth.Taken together,these materials show promise for various TE strategies.
