Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challengin...Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challenging due to limited gain and nonlinearity,hindering practical applications of such lasers.We demonstrate a pulse duration widely tunable mode-locked ultra-narrow bandwidth laser using a composite filtering mechanism and a single-wall carbon nanotube.The laser pulse duration can be adjusted from 481 ps to 1.38 ns,which is the widest tuning range achieved in narrow-bandwidth passively mode-locked lasers.When the pulse duration is 1.38 ns,the corresponding spectral width reaches 4 pm(502 MHz).Numerical simulations support the experimental results and show that the evolution of long pulses in the laser cavity behaves similarly to a quasi-continuous wave with a low breathing ratio.We have not only designed a simple and flexible tunable scheme for the dilemma of spectral-temporal control in narrow-bandwidth mode-locked fiber lasers but also provided a unique and idealized light source for various applications that takes into account robust output.展开更多
Narrow gap welding has merits of lower residual stress and distortion, and superior mechanical properties of joints. A major problem of this process is the lack of fusion in sidewalls, hence many methods of weaving ar...Narrow gap welding has merits of lower residual stress and distortion, and superior mechanical properties of joints. A major problem of this process is the lack of fusion in sidewalls, hence many methods of weaving arc have been developed to increase heating effect of arc to the sidewalls. In this work, a new approach Without weaving arc is attempted to ensure the penetration of sidewall, and ultra-narrow gap welding with the gap of less than 5 mm was executed successfully. In this approach, the width of gap is decreased further, so that the sidewalls are made within range of arc heating to obtain the enough heat. In order to prevent the arc from being attracted by sidewall and going up along the sidewalls, two pieces of flux bands consisting of the specified aggregates are adhered to the sidewalls to constrain the arc. In addition, when flux band being heated by the arc, slag and gases are formed to shield the arc and the weld pool. This technique was tested on the welding experiment of pipeline steel with thickness of 20 mm. The involved welding parameters were obtained, that is, the width of gap is 4 mm, the welding current 250 A, and the heat input 0. 5 kJ/mm, the width of heat-affected zone is 1 -2 mm.展开更多
Ultra-narrow gap welding （UNGW） process with high stabilization, reliability and without spatter can be achieved with constricted arc by molten slag wall, which is made from melted flux. The experiments are carried ...Ultra-narrow gap welding （UNGW） process with high stabilization, reliability and without spatter can be achieved with constricted arc by molten slag wall, which is made from melted flux. The experiments are carried out by changing voltage under different currents. The results indicate voltage range being fit for UNGW is about 22 -31 V under the current range of 200 -320 A. With the increasing of voltage, weld formation of UNGW has the law of lack of fusion on sidewall, good weld and undercut in turn under a certain current. In addition, the action relationships among arc, molten slag wall and sidewalls can be improved by properly adjusting voltage and current of arc, which makes cathode spot properly distribute in ultra-narrow gap. Therefore, the effective control of weld formation of UNGW has been achieved.展开更多
Two new kinds of ultra-narrow trigger frequency alterable picosecond pulse generator are presented.One can produce positive pulses and the other can produce negative pulses.The two pulse generators are subdivided into...Two new kinds of ultra-narrow trigger frequency alterable picosecond pulse generator are presented.One can produce positive pulses and the other can produce negative pulses.The two pulse generators are subdivided into three parts:signal driving circuit,differentiator network and pulse shaping circuit.The pulse shaping circuit is made of step recovery diode(SRD) and short-circuit microstrip line.A positive pulse with width of 54 ps(50%-50%),rising time of 30 ps(10%-90%) and falling time of 32 ps(90%-10%),and a negative pulse with width of 54 ps(50%-50%),rising time of 30 ps(90%-10%) and falling time of 30 ps(10%-90%) are achieved in simulation.All of the components are ready-made and inexpensive.They can be applied in ultra-wideband(UWB) communication system,such as transmitters and receivers.展开更多
The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-af...The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-affected zone, and the line energy are utilized as comprehensive indications of the quality of the welded joint. In order to achieve well fusion and reduce the heat input to the base metal.Three welding process characteristics were chosen as the primary determinants, including welding voltage, welding speed, and wire feeding speed. The metamodel of the welding quality index was built by the orthogonal experiments. The metamodel and NSGA-Ⅱ(Non-dominated sorting genetic algorithm Ⅱ) were combined to develop a multi-objective optimization model of ultra-narrow gap welding process parameters. The results showed that the optimized welding process parameters can increase the sidewall fusion depth, reduce the width of the heataffected zone and the line energy, and to some extent improve the overall quality of the ultra-narrow gap welding process.展开更多
We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 4...We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical signal-to-noise ratio(OSNR) more than 72 dB, or operating at wavelength-swept mode with tunable sweep rate of 10—200 Hz and a sweep range more than 50 nm. The excellent features mainly benefit from a triple-ring subring cavity constructed by three optical couplers nested one another and a fiber Fabry-Pérot tunable filter which can be driven by a constant voltage or a periodic sweep voltage for fixed or wavelength-swept operation, respectively. The proposed EDFL has potential applications in high-resolution spectroscopy and fiber optic sensing.展开更多
Ultra-narrow bandgap(ultra-NBG)small molecule acceptors(SMAs)show great potential in organic solar cells(OSCs)due to the extended near-infrared(NIR)absorption.In this work,a synergetic alkoxy side-chain and chlorine-c...Ultra-narrow bandgap(ultra-NBG)small molecule acceptors(SMAs)show great potential in organic solar cells(OSCs)due to the extended near-infrared(NIR)absorption.In this work,a synergetic alkoxy side-chain and chlorine-contained end group strategy is employed to achieve A-DA'D-A type ultra-NBG SMAs by introducing alkoxy chains with oxygen atom at the second position into the thiopheneβposition as well as replacing the F atoms with Cl atoms in the end group.As a result,the heptacyclic BZO-4F shows a redshifted absorption onset(960 nm)compared with Y11(932 nm)without oxygen atoms in the side chains.Then,the fluorinated end groups are substituted with the chlorinated ones to synthesize BZO-4Cl.The absorption onset of BZO-4Cl is further redshifted to 990 nm,corresponding to an optical ultra-NBG of 1.25 eV.When blending with the polymer donor PBDB-T,the binary devices based on PBDB-T:BZO-4F and PBDB-T:BZO-4Cl deliver power conversion efficiencies(PCEs)over 12%.Furthermore,ternary devices with the addition of BZ4F-O-1 into PBDB-T:BZO-4Cl system achieve the optimal PCE of 15.51%.This work proposes a synergetic alkoxy side-chain and chlorine-contained end group strategy to achieve A-DA'D-A type ultra-NBG SMAs,which is important for future molecular design.展开更多
We investigate the charge transport in close-packed ultra-narrow （1.5 nm diameter） gold nanowires stabilized by oleylamine ligands. We give evidence of charging effects in the weakly coupled one-dimensional （1D） n...We investigate the charge transport in close-packed ultra-narrow （1.5 nm diameter） gold nanowires stabilized by oleylamine ligands. We give evidence of charging effects in the weakly coupled one-dimensional （1D） nanowires, monitored by the temperature and the bias voltage. At low temperature, in the Coulomb blockade regime, the current flow reveals an original cooperative multi-hopping process between 1D-segments of Au-NWs, minimising the charging energy cost. Above the Coulomb blockade threshold voltage and at high temperature, the charge transport evolves into a sequential tunneling regime between the nearest- nanowires. Our analysis shows that the effective length of the Au-NWs inside the bundle is similar to the 1D localisation length of the electronic wave function （of the order of 120 nm _＋ 20 nm）, but almost two orders of magnitude larger than the diameter of the nanowire. This result confirms the high structural quality of the Au-NW segments.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.61975107)the Natural Science Foundation of Shanghai(Grant Nos.24ZR1422000 and 20ZR1471500),and the“111”Project(Grant No.D20031).
文摘Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challenging due to limited gain and nonlinearity,hindering practical applications of such lasers.We demonstrate a pulse duration widely tunable mode-locked ultra-narrow bandwidth laser using a composite filtering mechanism and a single-wall carbon nanotube.The laser pulse duration can be adjusted from 481 ps to 1.38 ns,which is the widest tuning range achieved in narrow-bandwidth passively mode-locked lasers.When the pulse duration is 1.38 ns,the corresponding spectral width reaches 4 pm(502 MHz).Numerical simulations support the experimental results and show that the evolution of long pulses in the laser cavity behaves similarly to a quasi-continuous wave with a low breathing ratio.We have not only designed a simple and flexible tunable scheme for the dilemma of spectral-temporal control in narrow-bandwidth mode-locked fiber lasers but also provided a unique and idealized light source for various applications that takes into account robust output.
文摘Narrow gap welding has merits of lower residual stress and distortion, and superior mechanical properties of joints. A major problem of this process is the lack of fusion in sidewalls, hence many methods of weaving arc have been developed to increase heating effect of arc to the sidewalls. In this work, a new approach Without weaving arc is attempted to ensure the penetration of sidewall, and ultra-narrow gap welding with the gap of less than 5 mm was executed successfully. In this approach, the width of gap is decreased further, so that the sidewalls are made within range of arc heating to obtain the enough heat. In order to prevent the arc from being attracted by sidewall and going up along the sidewalls, two pieces of flux bands consisting of the specified aggregates are adhered to the sidewalls to constrain the arc. In addition, when flux band being heated by the arc, slag and gases are formed to shield the arc and the weld pool. This technique was tested on the welding experiment of pipeline steel with thickness of 20 mm. The involved welding parameters were obtained, that is, the width of gap is 4 mm, the welding current 250 A, and the heat input 0. 5 kJ/mm, the width of heat-affected zone is 1 -2 mm.
基金The work was supported by National Natural Science Foundation of China （51105185） and Advanced Project Foundation of Jinchuan Company（420032）.
文摘Ultra-narrow gap welding （UNGW） process with high stabilization, reliability and without spatter can be achieved with constricted arc by molten slag wall, which is made from melted flux. The experiments are carried out by changing voltage under different currents. The results indicate voltage range being fit for UNGW is about 22 -31 V under the current range of 200 -320 A. With the increasing of voltage, weld formation of UNGW has the law of lack of fusion on sidewall, good weld and undercut in turn under a certain current. In addition, the action relationships among arc, molten slag wall and sidewalls can be improved by properly adjusting voltage and current of arc, which makes cathode spot properly distribute in ultra-narrow gap. Therefore, the effective control of weld formation of UNGW has been achieved.
基金the National Natural Science Foundation of China (No.60970058)the Natural Science Foundation of Jiangsu Province (No.SBK200930425)+1 种基金the fund of the State Key Laboratory of Millimetre Waves of Southeast Universitythe Student Research Training Program (SRTP) of Southeast University
文摘Two new kinds of ultra-narrow trigger frequency alterable picosecond pulse generator are presented.One can produce positive pulses and the other can produce negative pulses.The two pulse generators are subdivided into three parts:signal driving circuit,differentiator network and pulse shaping circuit.The pulse shaping circuit is made of step recovery diode(SRD) and short-circuit microstrip line.A positive pulse with width of 54 ps(50%-50%),rising time of 30 ps(10%-90%) and falling time of 32 ps(90%-10%),and a negative pulse with width of 54 ps(50%-50%),rising time of 30 ps(90%-10%) and falling time of 30 ps(10%-90%) are achieved in simulation.All of the components are ready-made and inexpensive.They can be applied in ultra-wideband(UWB) communication system,such as transmitters and receivers.
基金Project was supported by National Natural Science Foundation of China(Grant No.62173170).
文摘The successful confinement of the arc by the flux band depends on the welding process parameters for achieving single-pass,multi-layer, and ultra-narrow gap welding. The sidewall fusion depth, the width of the heat-affected zone, and the line energy are utilized as comprehensive indications of the quality of the welded joint. In order to achieve well fusion and reduce the heat input to the base metal.Three welding process characteristics were chosen as the primary determinants, including welding voltage, welding speed, and wire feeding speed. The metamodel of the welding quality index was built by the orthogonal experiments. The metamodel and NSGA-Ⅱ(Non-dominated sorting genetic algorithm Ⅱ) were combined to develop a multi-objective optimization model of ultra-narrow gap welding process parameters. The results showed that the optimized welding process parameters can increase the sidewall fusion depth, reduce the width of the heataffected zone and the line energy, and to some extent improve the overall quality of the ultra-narrow gap welding process.
基金supported by the Natural Science Foundation of Hebei Province(No.F2016201023)the Technology Foundation for Selected Overseas Chinese Scholar of Ministry of Human Resources and Social Security of China(No.CG2015003006)the Advanced Talents Program of Hebei Educational Committee(No.GCC2014020)
文摘We propose and demonstrate a novel single-longitudinal-mode(SLM) erbium-doped fiber laser(EDFL) capable of operating at fixed-wavelength lasing mode with a tunable range more than 54 nm, an ultra-narrow linewidth of 473 Hz and an ultra-high optical signal-to-noise ratio(OSNR) more than 72 dB, or operating at wavelength-swept mode with tunable sweep rate of 10—200 Hz and a sweep range more than 50 nm. The excellent features mainly benefit from a triple-ring subring cavity constructed by three optical couplers nested one another and a fiber Fabry-Pérot tunable filter which can be driven by a constant voltage or a periodic sweep voltage for fixed or wavelength-swept operation, respectively. The proposed EDFL has potential applications in high-resolution spectroscopy and fiber optic sensing.
基金This work was supported by the National Natural Science Foundation of China(Nos.52125306,22005347).
文摘Ultra-narrow bandgap(ultra-NBG)small molecule acceptors(SMAs)show great potential in organic solar cells(OSCs)due to the extended near-infrared(NIR)absorption.In this work,a synergetic alkoxy side-chain and chlorine-contained end group strategy is employed to achieve A-DA'D-A type ultra-NBG SMAs by introducing alkoxy chains with oxygen atom at the second position into the thiopheneβposition as well as replacing the F atoms with Cl atoms in the end group.As a result,the heptacyclic BZO-4F shows a redshifted absorption onset(960 nm)compared with Y11(932 nm)without oxygen atoms in the side chains.Then,the fluorinated end groups are substituted with the chlorinated ones to synthesize BZO-4Cl.The absorption onset of BZO-4Cl is further redshifted to 990 nm,corresponding to an optical ultra-NBG of 1.25 eV.When blending with the polymer donor PBDB-T,the binary devices based on PBDB-T:BZO-4F and PBDB-T:BZO-4Cl deliver power conversion efficiencies(PCEs)over 12%.Furthermore,ternary devices with the addition of BZ4F-O-1 into PBDB-T:BZO-4Cl system achieve the optimal PCE of 15.51%.This work proposes a synergetic alkoxy side-chain and chlorine-contained end group strategy to achieve A-DA'D-A type ultra-NBG SMAs,which is important for future molecular design.
文摘We investigate the charge transport in close-packed ultra-narrow （1.5 nm diameter） gold nanowires stabilized by oleylamine ligands. We give evidence of charging effects in the weakly coupled one-dimensional （1D） nanowires, monitored by the temperature and the bias voltage. At low temperature, in the Coulomb blockade regime, the current flow reveals an original cooperative multi-hopping process between 1D-segments of Au-NWs, minimising the charging energy cost. Above the Coulomb blockade threshold voltage and at high temperature, the charge transport evolves into a sequential tunneling regime between the nearest- nanowires. Our analysis shows that the effective length of the Au-NWs inside the bundle is similar to the 1D localisation length of the electronic wave function （of the order of 120 nm _＋ 20 nm）, but almost two orders of magnitude larger than the diameter of the nanowire. This result confirms the high structural quality of the Au-NW segments.
