Based on uniaxial experimental data of a nickel-based superalloy Udimet 720Li under monotonic tension, symmetrically cyclic loading and creep loading, the paper studied to utilize the Bodner-Partom unified constitutiv...Based on uniaxial experimental data of a nickel-based superalloy Udimet 720Li under monotonic tension, symmetrically cyclic loading and creep loading, the paper studied to utilize the Bodner-Partom unified constitutive theory to model the mechanical behaviors of the material under these three different loading conditions for the first time. After detailed analysis of the constitutive characteristics of the unified equations, a systematically optimized strategy was proposed to obtain material parameters in the equations. Thereafter, the B-P model was implemented into ABAQUS through UMAT subroutine and was employed to calculate inelastic responses of the material for different uniaxial loading cases at 700℃. Theoretical predictions are compared to experimental data and good agreement is generated.展开更多
Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that,...Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.展开更多
Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-...Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-5000h range. The creep curves have shown a predominant accelerating creep stage, that has been described by the following equation: where ε min depends on stress and temperature, while parameter C depends mainly on stress. A strain dependent damage, defined by the parameter C, causes the accelerating creep stage at stresses lower than 750MPa, whilst its contribution to the creep strain acceleration is less important at higher stresses. The model rationalizes the different behaviors at high and low stress and has been validated with variable stress and temperature creep behavior.展开更多
文摘Based on uniaxial experimental data of a nickel-based superalloy Udimet 720Li under monotonic tension, symmetrically cyclic loading and creep loading, the paper studied to utilize the Bodner-Partom unified constitutive theory to model the mechanical behaviors of the material under these three different loading conditions for the first time. After detailed analysis of the constitutive characteristics of the unified equations, a systematically optimized strategy was proposed to obtain material parameters in the equations. Thereafter, the B-P model was implemented into ABAQUS through UMAT subroutine and was employed to calculate inelastic responses of the material for different uniaxial loading cases at 700℃. Theoretical predictions are compared to experimental data and good agreement is generated.
文摘Thermal stabilities of microstructure and mechanical property have been investigated on superalloy U720Li, which is of great interest of application for jet engine and land-based turbine disc. The results showed that, the primary and secondary gamma' particles maintain good thermal stability at 650 and 700 degreesC with aging time up to 3000 h, while the tertiary gamma' is apparently dependent on aging temperature and time. The tertiary gamma' particles undergo a procedure of coarsening, dissolution and eventually complete disappearance with the increasing of aging time and temperature. They exhibit unusual high sensibility upon aging temperature, which is attributed to the lattice misfit between the gamma' precipitates and the matrix in the alloy. The grain boundary phase M23C6 remains stable without forming of sigma phase even with aging time up to 3000 h at 700 degreesC. Microhardness decreases apparently with increasing aging time and aging temperature. Theoretical analysis based on dislocation mechanism indicates that the change of microhardness should be attributed to the evolution of the tertiary gamma' during aging.
文摘Constant load creep tests on isothermally forged Udimet 720Li, an advanced superalloy for gas turbine disc application, were run in the stress/temperature field 900-450MPa/650-700 ℃ producing rupture times in the 20-5000h range. The creep curves have shown a predominant accelerating creep stage, that has been described by the following equation: where ε min depends on stress and temperature, while parameter C depends mainly on stress. A strain dependent damage, defined by the parameter C, causes the accelerating creep stage at stresses lower than 750MPa, whilst its contribution to the creep strain acceleration is less important at higher stresses. The model rationalizes the different behaviors at high and low stress and has been validated with variable stress and temperature creep behavior.
