The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value o...The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value of the produced gas should be acceptable.The main aim of this study is to present a model that meets these aspects and increasing the calorific value of syngas during this process.In order to achieve those aims,eight different increasing scenarios were devised for total gasification of coal per panel.These scenarios included:increasing oxygen injection rate(scenario 1),the amount of steam injection(scenario 2),operation time(scenario 3),cavity pressure(scenario 4),increase operation time and cavity pressure simultaneously(scenario 5),increase steam injection speed and oxygen injection rate simultaneously(scenario 6),increase in cavity pressure,operating time,steam injection rate and oxygen injection rate simultaneously(scenario 7)and also simultaneous increase in the operating time and steam injection rate(scenario 8).The results showed that for producing syngas with a higher calorific value,the following parameters had the most positive effects respectively:operation time,cavity pressure,steam injection rate and oxygen injection rate.Finally,the model validation was performed for the Centralia LBK-1 UCG pilot and the results showed that this model is very close to reality.展开更多
In order to study temperature field distribution in burnt surrounding rock and to determine ranges of burnt surrounding rock, coal-wall coking cycle and heat influence in the underground coal gasification(UCG) stope, ...In order to study temperature field distribution in burnt surrounding rock and to determine ranges of burnt surrounding rock, coal-wall coking cycle and heat influence in the underground coal gasification(UCG) stope, based on the Laplace transform and inversion formula, we studied the temperature analytical solution of one-dimensional unsteady heat conduction for multi-layer overlying strata under the first and the forth kinds of boundary conditions, and we also carried out a numerical simulation of twodimensional unsteady heat conduction by the COMSOL multiphysics. The results show that when the boundary temperature of surrounding rock has a linear decrease because of a directional movement of heat source in the UCG flame working face, the temperature in surrounding rock increases first and then decreases with time, the peak of temperature curve decreases gradually and its position moves inside surrounding rock from the boundary. In the surrounding rock of UCG stope, there is an envelope curve of temperature curve clusters. We analyzed the influence of thermophysical parameters on envelope curves and put forward to take envelope curve as the calculation basis for ranges of burnt surrounding rock, coal-wall coking cycle and heat influence. Finally, the concrete numerical values are given by determining those judgement standards and temperature thresholds, which basically tally with the field geophysical prospecting results.展开更多
In this study,a packed bed reactor was developed to investigate the gasification process of coal particles.The effects of coal particle size and heater temperature of reactor were examined to identify the thermochemic...In this study,a packed bed reactor was developed to investigate the gasification process of coal particles.The effects of coal particle size and heater temperature of reactor were examined to identify the thermochemical processes through the packed bed.Three different coal samples with varying size,named as A,B,and C,are used,and the experimental results show that the packed bed with smaller coal size has higher temperature,reaching 624°C,582°C,and 569°C for coal A,B,and C,respectively.In the case of CO formation,the smaller particle size has greater products in the unit of mole fraction over the area of generation.However,the variation in the porosity of the packed bed due to different coal particle sizes affects the reactions through the oxygen access.Consequently,the CO formation is least from the coal packed bed formed by the smallest particle size A.A second test with the temperature variations shows that the higher heater temperature promotes the chemical reactions,resulting in the increased gas products.The findings indicate the important role of coal seam porosity in underground coal gasification application,as well as temperature to promote the syngas productions.展开更多
This paper introduces the results of a semi-industrial UCG trial carried out at Xuzhou Xinghe No. 2 mine. A new underground gasifier, long tunnel. large section underground gasifier, is designed. It is an important wa...This paper introduces the results of a semi-industrial UCG trial carried out at Xuzhou Xinghe No. 2 mine. A new underground gasifier, long tunnel. large section underground gasifier, is designed. It is an important way to make LCG cornmercialization because the new gasifier can steadily produce gas with higher heat value by changing the flow state of air and gas in the tunnel.展开更多
文摘The determination of operational parameters in the underground coal gasification(UCG)process should be considered in two aspects:first,the total coal in each UCG panel must be gasified and second,the calorific value of the produced gas should be acceptable.The main aim of this study is to present a model that meets these aspects and increasing the calorific value of syngas during this process.In order to achieve those aims,eight different increasing scenarios were devised for total gasification of coal per panel.These scenarios included:increasing oxygen injection rate(scenario 1),the amount of steam injection(scenario 2),operation time(scenario 3),cavity pressure(scenario 4),increase operation time and cavity pressure simultaneously(scenario 5),increase steam injection speed and oxygen injection rate simultaneously(scenario 6),increase in cavity pressure,operating time,steam injection rate and oxygen injection rate simultaneously(scenario 7)and also simultaneous increase in the operating time and steam injection rate(scenario 8).The results showed that for producing syngas with a higher calorific value,the following parameters had the most positive effects respectively:operation time,cavity pressure,steam injection rate and oxygen injection rate.Finally,the model validation was performed for the Centralia LBK-1 UCG pilot and the results showed that this model is very close to reality.
基金supported by the State Key Laboratory of Coal Resources and Safe Mining (No. SKLCRSM10X04)the National Natural Science Foundation of China ((No. 21243006)+1 种基金the Foundation of Ministry of Education of China ((No. 02019)the Priority Academic Program Development of Jiangsu Higher Education Institutions (No.SZBF2011-6-B35)
文摘In order to study temperature field distribution in burnt surrounding rock and to determine ranges of burnt surrounding rock, coal-wall coking cycle and heat influence in the underground coal gasification(UCG) stope, based on the Laplace transform and inversion formula, we studied the temperature analytical solution of one-dimensional unsteady heat conduction for multi-layer overlying strata under the first and the forth kinds of boundary conditions, and we also carried out a numerical simulation of twodimensional unsteady heat conduction by the COMSOL multiphysics. The results show that when the boundary temperature of surrounding rock has a linear decrease because of a directional movement of heat source in the UCG flame working face, the temperature in surrounding rock increases first and then decreases with time, the peak of temperature curve decreases gradually and its position moves inside surrounding rock from the boundary. In the surrounding rock of UCG stope, there is an envelope curve of temperature curve clusters. We analyzed the influence of thermophysical parameters on envelope curves and put forward to take envelope curve as the calculation basis for ranges of burnt surrounding rock, coal-wall coking cycle and heat influence. Finally, the concrete numerical values are given by determining those judgement standards and temperature thresholds, which basically tally with the field geophysical prospecting results.
基金The first author gratefully acknowledges the Ministry of Research,Technology,and Higher Education(KEMENRISTEKDIKTI)of Republic Indonesia for the scholarship funding through the Research and Innovation in Science and Technology Project(RISET-Pro)program and also the University of Glasgow for supporting this research.
文摘In this study,a packed bed reactor was developed to investigate the gasification process of coal particles.The effects of coal particle size and heater temperature of reactor were examined to identify the thermochemical processes through the packed bed.Three different coal samples with varying size,named as A,B,and C,are used,and the experimental results show that the packed bed with smaller coal size has higher temperature,reaching 624°C,582°C,and 569°C for coal A,B,and C,respectively.In the case of CO formation,the smaller particle size has greater products in the unit of mole fraction over the area of generation.However,the variation in the porosity of the packed bed due to different coal particle sizes affects the reactions through the oxygen access.Consequently,the CO formation is least from the coal packed bed formed by the smallest particle size A.A second test with the temperature variations shows that the higher heater temperature promotes the chemical reactions,resulting in the increased gas products.The findings indicate the important role of coal seam porosity in underground coal gasification application,as well as temperature to promote the syngas productions.
文摘This paper introduces the results of a semi-industrial UCG trial carried out at Xuzhou Xinghe No. 2 mine. A new underground gasifier, long tunnel. large section underground gasifier, is designed. It is an important way to make LCG cornmercialization because the new gasifier can steadily produce gas with higher heat value by changing the flow state of air and gas in the tunnel.
