In recent years,tuned liquid dampers(TLDs)have emerged as a focal point of research due to their remarkable potential for structural vibration mitigation.Yet,progress in this field remains constrained by an incomplete...In recent years,tuned liquid dampers(TLDs)have emerged as a focal point of research due to their remarkable potential for structural vibration mitigation.Yet,progress in this field remains constrained by an incomplete understanding of the fundamental mechanisms governing sloshing-induced loads in liquid-filled containers.Aqueducts present a distinctive case,as the capacity of their contained water to function effectively as a TLD remains uncertain.To address this gap,the present study investigates the generation mechanisms of sloshing loads under non-resonant cases through a two-dimensional(2D)computational fluid dynamics(CFD)model developed in ANSYS Fluent.The incompressible Reynolds-Averaged Navier–Stokes(RANS)equations are solved,while the Volume of Fluid(VOF)method captures the evolution of the air–water interface.Turbulent flow behavior is modeled using the RNG-approach.The ensuing results reveal the dynamic characteristics of the horizontal force(fℎ)and the fluctuating component of the vertical force(Fof).Fh is predominantly governed by the inertia of the deep-water region and its phase varies coherently with the aqueduct’s acceleration.With increasing excitation amplitude(A)and frequency(f),the contribution of deep-water inertia to𝐹ℎintensifies markedly,accounting for 82.6–92.1%of the total horizontal load at an excitation amplitude of 0.15 m and frequencies of 1.0–1.6 Hz.The extreme values of Fof arise primarily from asymmetric static pressures induced by free-surface fluctuations,which are further amplified when wall gaps appear at large amplitudes(A≥10 cm)and high frequencies(f≥1.4 Hz).Unlike resonant cases dominated by free-surface resonance,non-resonant sloshing loads are principally driven by deep-water inertia and motion-induced surface asymmetry.展开更多
As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A s...As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.展开更多
In recent years,tuned liquid dampers(TLDs)have attracted significant research interest;however,overall progress has been limited due to insufficient understanding of the mechanisms governing sloshing-induced loads.In ...In recent years,tuned liquid dampers(TLDs)have attracted significant research interest;however,overall progress has been limited due to insufficient understanding of the mechanisms governing sloshing-induced loads.In particular,it remains unclear whether the water in aqueducts—common water-diversion structures in many countries—can serve as an effective TLD.This study investigates the generation mechanisms of sloshing loads during the first-order transverse resonance of water in a U-shaped aqueduct using a two-dimensional(2D)numerical model.The results reveal that,at the equilibrium position,the free surface difference between the left and right walls,the horizontal force on the aqueduct,and the fluctuating component of the vertical force all reach their maxima,with energy predominantly stored as potential energy.At the maximum displacement position,the surface difference and horizontal force drop to zero,while the fluctuating vertical force attains its minimum and energy shifts primarily to kinetic form.At this stage,static pressure is governed solely by the vertical convective acceleration,whereas at equilibrium it is closely linked to both the free surface difference and vertical local acceleration of the water.This dynamic energy exchange generates vertical force oscillations even when the free surface appears nearly symmetric.展开更多
Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio ac...Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio active compounds) remain poorly understood,limiting their therapeutic application.This study provides the first comprehensive characterization of spatiotemporal dynamics in airborne phytoncides and their synergistic interactions with environmental factors throughout the autumn-early spring seasonal transition in a temperate forest ecosystem.We analyzed the compositional dynamics of phytoncides and terpenoid content variations using thermal desorption-gas chromatography-mass spectrometry(TD-GC-MS) from September 2024 to March 2025.This period encompassed seasonal transitions from autumn to early spring,including diurnal variations in September and snowfall events in November.The method demonstrated detection limits(LODs) ranging from 1.35 to 5.33 ng m-3 and quantification limits(LOQs) from 4.09 to 16.15 ng m-3.Our results revealed pronounced seasonal fluctuations in phytoncide composition.In September,terpenoids,esters,alcohols,and alkanes displayed a diurnal "decrease-increase" trend,whereas aldehydes and ketones peaked at midday.Notably,esters and alcohols were undetectable in November and January.By January,terpenoids reached their lowest proportion(0.17±0.02%) at noon.Five terpenoids(α-pinene,myrcene,D-limonene,camphene,p-cymene) were detected in September,four(α-pinene,D-limonene,camphene,p-cymene) in November,two(D-limonene,p-cymene) in January,and only p-cymene in March.The total concentration and emission rate of the five terpenoids peaked in September afternoons at 1961.58±106.67 ng m^(-3) and653.86±35.56 ng m^(-3) h^(-1),respectively.Nocturnal emissions(32131.95±2522.21 ng m^(-3)) significantly surpassed daytime levels(14473.04±958.49 ng m^(-3)),with emission rates escalating from 1447.30±95.85 ng m^(-3) h^(-1)(day) to 5355.33±420.37 ng m^(-3) h^(-1)(night),marking a3.7-fold increase.Snowfall dramatically elevated terpenoid concentrations(pre-snowfall:158.58±14.12 ng m^(-3);post-snowfall:1080.57±57.76 ng m^(-3)) and emission rates(pre-snowfall:52.86±4.71 ng m^(-3) h^(-1);post-snowfall:360.19±19.25 ng m^(-3) h^(-1)),reflecting a 6.8-fold surge.This study underscores the profound influence of light intensity,seasonal shifts,and climatic conditions on airborne phytoncide levels,offering a scientific foundation for optimizing forest therapy and ecotourism strategies.展开更多
Urban forests are essential components of green infrastructure,however,rapid urbanization-induced changes in landscape patterns may affect their ecosystem services through complex ecological processes.A total of 184 s...Urban forests are essential components of green infrastructure,however,rapid urbanization-induced changes in landscape patterns may affect their ecosystem services through complex ecological processes.A total of 184 sample plots in the built-up areas of Nanchang,China,were used as research sites.Urbanization intensities were categorized by the rate of impervious surface area,and forest types were classified into landscape and relaxation forest,attached forest(AF),road forest(RF),and ecological public welfare forest.This study aimed to explore the spatial variations in vegetation characteristics and landscape pattern indices of different forest types under rapid urbanization.The results indicated that the largest patch index(LPI),aggregation index(AI),and percentage of landscape(PLAND)in RF and AF were lower than those in the other forest types(p<0.05).With increasing urbanization intensity,the mean perimeter-area ratio increased by 130.84%,whereas the PLAND,LPI,and AI decreased by 22−86%(p<0.05).Redundancy analysis and variation partitioning suggested that the interpretation rate of landscape pattern indices for variations in vegetation characteristics increased from low to heavy urbanization areas.Especially,the landscape shape index,patch connection index,PLAND,and mean patch size were significantly correlated with vegetation characteristics(e.g.,tree richness,herb coverage,and tree height).In the future,appropriate landscape layout superiority cases should be considered in different urbanization areas and forest types;for instance,increasing the patch connection index will beneficially improve the diversity of trees and herbs in heavy urbanization areas and the RF.This study serves as a reference for maximizing the ecosystem services of urban forests.展开更多
The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,...The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,allowing users to operate on already restored files while other files are still being restored.This approach improves availability during restoration tasks but suffers from a critical limitation:inconsistencies between the access sequence and the restore sequence.In many cases,the file a user needs to access at a given moment may not yet be restored,resulting in significant delays and poor user experience.To this end,we present Histore,which builds on the user’s historical access sequence to schedule the restore sequence,in order to reduce users’access delayed time.Histore includes three restore approaches:(i)the frequency-based approach,which restores files based on historical file access frequencies and prioritizes ensuring the availability of frequently accessed files;(ii)the graph-based approach,which preferentially restores the frequently accessed files as well as their correlated files based on historical access patterns,and(iii)the trie-based approach,which restores particular files based on both users’real-time and historical access patterns to deduce and restore the files to be accessed in the near future.We implement a prototype of Histore and evaluate its performance from multiple perspectives.Trace-driven experiments on two datasets show that Histore significantly reduces users’delay time by 4-700×with only 1.0%-14.5%additional performance overhead.展开更多
Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges...Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).展开更多
Wide-field mesoscopy provides the capabilities of cortex-wide field of view(FOV),cellular resolution and high frame rate for neuronal imaging in the mouse brain.However,inherent background fluorescence degrades the im...Wide-field mesoscopy provides the capabilities of cortex-wide field of view(FOV),cellular resolution and high frame rate for neuronal imaging in the mouse brain.However,inherent background fluorescence degrades the image quality and hinders neuronal signal extraction.To address this problem,we first introduce a cortex-wide,high-resolution lineillumination mesoscope with a moving slit designed for in vivo mouse brain imaging.This system achieves a 6.6×6.6 mm FOV,microscale cellular resolution,a high frame rate of 10 Hz,as well as the background rejection ability.Furthermore,we integrated patterned illumination into the system to enhance the background suppression.Experimental results show that the proposed system successfully captures neurodynamics in the living mouse brain.Compared with conventional wide-field mesoscopes,the cortex-wide patterned line-illumination mesoscope(PLIM)achieves a threefold increase in the signal-to-background ratio(SBR).With patterned illumination integrated,the SBR enhancement further reaches four-anda-half-fold.展开更多
A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforat...A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.展开更多
BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Resear...BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.展开更多
Understanding spatial patterns of plant species diversity and the factors(e.g.,climate and human)that drive these patterns is essential for biodiversity conservation.We used data from 1700.1-ha forest plots in the She...Understanding spatial patterns of plant species diversity and the factors(e.g.,climate and human)that drive these patterns is essential for biodiversity conservation.We used data from 1700.1-ha forest plots in the Shettihalli tropical forest landscape of the Western Ghats biodiversity hotspot,India,to analyse tree community composition and the drivers ofα-diversity(Shannon)andβ-diversity(LCBD).Compositional patterns were visualized using Non-Metric Multidimensional Scaling(NMDS),and hybrid feature selection with structural equation modeling(SEM)was employed to evaluate the direct and indirect effects of environmental variables on diversity.NMDS identified four distinct forest types in the Shettihalli landscape:semi-evergreen,dry deciduous,moist deciduous,and plantation forests,each with distinct plant composition.Shannon diversity and ecological uniqueness was significantly higher in semi-evergreen forest than in deciduous forest plots.The SEMs explained about 79%and 39–45%of the variation inα-diversity andβ-diversity.Our analysis indicated that current diversity patterns result from multiple processes,with structure,disturbance,and edaphic parameters exerting the strongest direct and indirect effects onα-diversity.β-diversity,in contrast,was largely influenced by climate,topography,stand structure,and edaphic factors.Overall,our findings indicate that various factors(e.g.,climate,topography,and human disturbance)interact to shape tree diversity patterns in tropical forests.These findings will help develop unique conservation and management strategies for distinct forest types in tropical forest ecosystems.展开更多
Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of mineral...Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.展开更多
Because of the complex constraint effects among layers in multi-layered metallic bellows hydroforming,the stress concentration and defects such as wrinkling and fracture may easily occur.It is a key to reveal the defo...Because of the complex constraint effects among layers in multi-layered metallic bellows hydroforming,the stress concentration and defects such as wrinkling and fracture may easily occur.It is a key to reveal the deformation behaviors in order to obtain a sound product.Based on the ABAQUS platform,a 3 D-FE model of the four-layered U-shaped metallic bellow hydroforming process is established and validated by experiment.The stress and strain distributions,wall thickness variations and bellow profiles of each layer in the whole process,including bulging,folding and springback stages,are studied.Then deformation behaviors of bellows under different forming conditions are discussed.It is found that the wall thinning degrees of different layer vary after hydroforming,and is the largest for the inner layer and smallest for the outer layer.At folding stage,the wall thinning degree of the crown point increases lineally,and the difference among layers increases as the process going.The displacements of the crown point decrease from the inner layer to the outer layer.After springback,the U-shaped cross section changes to a tongue shape,the change of convolution pitch is much larger than the change of convolution height,and the springback values of the inner layer are smaller than the outer layer.An increase in the internal pressure and die spacing cause the maximum wall thinning degree and springback increase.With changing of process parameters,bellows with deep convolution are easily encountered wall thinning during hydroforming and convolution distortion after springback.This research is helpful for precision forming of multi-layered bellows.展开更多
U-shaped sacral fractures are rare and often difficult to diagnose primarily due to the difficulty in obtaining adequate imaging and the severe associated injuries. These fractures are highly unstable and frequently c...U-shaped sacral fractures are rare and often difficult to diagnose primarily due to the difficulty in obtaining adequate imaging and the severe associated injuries. These fractures are highly unstable and frequently cause neurological deficits. The majority of surgeons have limited experience in management of U-shaped sacral fractures. No standard treatment protocol for U-shaped sacral fractures has been available till now. This study aimed to examine the management of U-shaped sacral fractures and the early outcomes. Clinical data of 15 consecutive patients with U-shaped sacral fracture who were admitted to our trauma center between 2009 and 2014 were retrospectively analyzed. Demographics, fracture classification, mechanism of injury and operative treatment and deformity angle were assessed. All the patients were treated with lumbopelvic fixation or （and） sacral decompression. EQ-5d score was applied to evaluate the patients＇ quality of life. Of the 15 consecutive patients with U-shaped sacral fracture, the mean age was 28.8 years （range： 15-55 years） at the time of injury. There were 6 females and 9 males. The mean follow- up time was 22.7 months （range： 9-47 months） and mean full weight-bearing time was 9.9 weeks （range： 8-14 weeks）. Ten patients received lumbopelvic fixation and sacral decompression, one lombosacral fixation, and 4 merely sacral decompression due to delayed diagnosis or surgery. The post-operation deformity angle （mean 27.87°, and range： 8°-90°） of the sacrum was smaller than that pre-operation （mean 35.67; range： 15-90） with no significance difference noted. At the latest follow-up, all patients obtained neurological recovery with different extents. Visual analogue score （VAS） was reduced from preoperative 7.07 （range： 5-9） to postoperetive 1.93 （range： 1-3）. All patients could walk without any aid after treatment. Eight patients were able to care for themselves and undertook some daily activities. Five patients had returned to work full time. In conclusion, lumbopelvic fixation is an effective method for stabilization of U-shaped sacral fractures with fewer complications developed. Effective reduction and firm fixation are the prerequisite of early mobilization and neurological recovery. Sacral decompression effectively promotes neurological recovery even in patients with old U-shaped sacral fractures.展开更多
Open U-shaped steel arch supports are commonly used in large-section static-pressure roadways in coal mines that are more than 900 m deep;however,it is very difficult to control floor heave of roadways.In this paper,a...Open U-shaped steel arch supports are commonly used in large-section static-pressure roadways in coal mines that are more than 900 m deep;however,it is very difficult to control floor heave of roadways.In this paper,a U-shaped steel closed support with an inverted U-shaped steel arch in the floor is proposed as a method for improving the support effect of the surrounding rock during the process of floor heaving.This research established a mechanical model for the U-shaped steel closed support,and determined the reaction forces at the connection of a camber angle.Using the limit load method calculated the critical buckling load of the inverted U-shaped steel arch,and use of a strength check method tested the strength of the U-shaped steel material.A numerical simulation was conducted using the finite difference software FLAC3 D.The simulation results show that the U-shaped steel closed support is able to control the floor heave of roadways,which is successfully used in the West 11-2 development roadway of the Zhuji Mine in the Huainan mining area in China.The cumulative floor heave over two years was less than50 mm.展开更多
This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parame...This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parameters were designed and tested under monotonic and cyclic quasi-static loading protocols.The experimental results from a total of 232 specimens were analyzed to develop an analytical model to calculate the backbone curve and the maximum elastic restoring force for U-shaped 65Mn bumpers.Thus,the analytical equations to calculate the elastic,hardening,and unloading stiffness of U-shaped 65Mn bumpers,as well as their maximum elastic restoring force,are validated by using an additional ten groups of bumpers with varying radiuses.These analytical equations can accurately predict the mechanical parameters of U-shaped 65Mn steel bumpers for a design purpose.展开更多
The formulae for stresses and angular displacements of U-shaped bellows overall bending in a meridian plane under pure bending moments are presented based on the general solution for slender ring shells proposed by Zh...The formulae for stresses and angular displacements of U-shaped bellows overall bending in a meridian plane under pure bending moments are presented based on the general solution for slender ring shells proposed by Zhu Weiping, et al. and the solution for ring plates. The results evaluated in this paper are compared with those on EJMA (standards of the expansion joint manufacturers association) and of the experiment given by Li Tingxilz, et al.展开更多
Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was...Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was established. Using parametric programming language, finite element calculation modules considering climate conditions, bridge site, structure dimension and material thermophysical properties were compiled. Six standard day cycles with the strongest yearly radiation among the bridge sites were selected for sectional solar temperature field calculation and temperature distributions under different temperature-sensitive parameters were compared. The results show that under the influence of sunshine, U-shape section of the beam shows obvious nonlinear distribution characteristics and the maximum cross-section temperature difference is more than 21℃; the ballast significantly reduces sunshine temperature difference of the beam and temperature peak of the bottom margin lags with the increase of ballast thickness; the maximum cross-section vertical temperature gradient appears in summer while large transverse temperature difference appears in winter.展开更多
U-shaped micro-nanochannels can generate significant flow disturbance as well as locally amplified electric field, which gives itself potential to be microfluidic mixers, electrokinetic pumps,and even cell lysis proce...U-shaped micro-nanochannels can generate significant flow disturbance as well as locally amplified electric field, which gives itself potential to be microfluidic mixers, electrokinetic pumps,and even cell lysis process. Numerical simulation is utilized in this work to study the hidden characteristics of the U-shaped micro-nanochannel system, and the effects of key controlling parameters(the external voltage and pressure) on the device output metrics(current, maximum values of electric field, shear stress and flow velocity) were evaluated. A large portion of current flowing through the whole system goes through the nanochannels, rather than the middle part of the microchannel, with its value increasing linearly with the increase of voltage. Due to the local ion depletion near micro-nanofluidic junction, significantly enhanced electric field(as much as 15 fold at V=1 V and P_0=0) as well as strong shear stress(leading to electrokinetic flow) is generated.With increasing external pressure, both electric field and shear stress can be increased initially(due to shortening of depletion region length), but are suppressed eventually at higher pressure due to the destruction of ion depletion layer. Insights gained from this study could be useful for designing nonlinear electrokinetic pumps and other systems.展开更多
To get a full understanding of hot extrusion,solid solution treatment and aging process on the Al−0.56Mg−0.63Si alloy,the microstructure and mechanical properties of a U-shaped profile were studied through optical mic...To get a full understanding of hot extrusion,solid solution treatment and aging process on the Al−0.56Mg−0.63Si alloy,the microstructure and mechanical properties of a U-shaped profile were studied through optical microscopy,scanning electrical microscopy,transmission electrical microscopy,hardness,and tensile tests.The coarse equiaxed grains existed near the profile edge as a result of the dynamic recrystallization nucleation and exceeding growth during hot extrusion.The fibrous deformed and sub-structured grains located between the two coarse grain layers,due to the occurrence of work-hardening and dynamic recovery.Perpendicular needle β′′precipitates were distributed inside the grain,and obvious precipitates-free zone appeared after aging treatment.The tensile strength,yield strength and elongation of the aged Al−Mg−Si alloy U-shaped profile were no less than 279.4 MPa,258.6 MPa,and 21.6%,respectively.The fracture morphology showed dimple rupture characteristics.The precipitates and grain boundaries played key role in the strengthening contribution.展开更多
基金supported by Science and Technology Planning Project of Sichuan Province with Grant No.2023YFS0429supported by Science and Technology Project of China Road and Bridge Corporation with Grant No.P2220447+1 种基金supported by Foundation of Xinjiang Institute of Engineering 2024(Grant No.2024xgy072605)also supported by Sichuan Natural Science Foundation Project(Grant No.2024NSFSC0162).
文摘In recent years,tuned liquid dampers(TLDs)have emerged as a focal point of research due to their remarkable potential for structural vibration mitigation.Yet,progress in this field remains constrained by an incomplete understanding of the fundamental mechanisms governing sloshing-induced loads in liquid-filled containers.Aqueducts present a distinctive case,as the capacity of their contained water to function effectively as a TLD remains uncertain.To address this gap,the present study investigates the generation mechanisms of sloshing loads under non-resonant cases through a two-dimensional(2D)computational fluid dynamics(CFD)model developed in ANSYS Fluent.The incompressible Reynolds-Averaged Navier–Stokes(RANS)equations are solved,while the Volume of Fluid(VOF)method captures the evolution of the air–water interface.Turbulent flow behavior is modeled using the RNG-approach.The ensuing results reveal the dynamic characteristics of the horizontal force(fℎ)and the fluctuating component of the vertical force(Fof).Fh is predominantly governed by the inertia of the deep-water region and its phase varies coherently with the aqueduct’s acceleration.With increasing excitation amplitude(A)and frequency(f),the contribution of deep-water inertia to𝐹ℎintensifies markedly,accounting for 82.6–92.1%of the total horizontal load at an excitation amplitude of 0.15 m and frequencies of 1.0–1.6 Hz.The extreme values of Fof arise primarily from asymmetric static pressures induced by free-surface fluctuations,which are further amplified when wall gaps appear at large amplitudes(A≥10 cm)and high frequencies(f≥1.4 Hz).Unlike resonant cases dominated by free-surface resonance,non-resonant sloshing loads are principally driven by deep-water inertia and motion-induced surface asymmetry.
基金supported by Tianjin Science and Technology Planning Project(22YDTPJC0020).
文摘As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.
基金Science and Technology Planning Project of Sichuan Province with Grant No.2023YFS0429supported by Science and Technology Project of China Road and Bridge Corporation with Grant No.P2220447+1 种基金supported by Foundation of Xinjiang Institute of Engineering 2024(Grant No.2024xgy072605)supported by Sichuan Natural Science Foundation Project(Grant No.2024NSFSC0162).The numerical calculations in this study have been done on Hefei advanced computing center.
文摘In recent years,tuned liquid dampers(TLDs)have attracted significant research interest;however,overall progress has been limited due to insufficient understanding of the mechanisms governing sloshing-induced loads.In particular,it remains unclear whether the water in aqueducts—common water-diversion structures in many countries—can serve as an effective TLD.This study investigates the generation mechanisms of sloshing loads during the first-order transverse resonance of water in a U-shaped aqueduct using a two-dimensional(2D)numerical model.The results reveal that,at the equilibrium position,the free surface difference between the left and right walls,the horizontal force on the aqueduct,and the fluctuating component of the vertical force all reach their maxima,with energy predominantly stored as potential energy.At the maximum displacement position,the surface difference and horizontal force drop to zero,while the fluctuating vertical force attains its minimum and energy shifts primarily to kinetic form.At this stage,static pressure is governed solely by the vertical convective acceleration,whereas at equilibrium it is closely linked to both the free surface difference and vertical local acceleration of the water.This dynamic energy exchange generates vertical force oscillations even when the free surface appears nearly symmetric.
基金supported by the Key Research and Development Plan Project of Heilongjiang Province (2022ZX02C13)。
文摘Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio active compounds) remain poorly understood,limiting their therapeutic application.This study provides the first comprehensive characterization of spatiotemporal dynamics in airborne phytoncides and their synergistic interactions with environmental factors throughout the autumn-early spring seasonal transition in a temperate forest ecosystem.We analyzed the compositional dynamics of phytoncides and terpenoid content variations using thermal desorption-gas chromatography-mass spectrometry(TD-GC-MS) from September 2024 to March 2025.This period encompassed seasonal transitions from autumn to early spring,including diurnal variations in September and snowfall events in November.The method demonstrated detection limits(LODs) ranging from 1.35 to 5.33 ng m-3 and quantification limits(LOQs) from 4.09 to 16.15 ng m-3.Our results revealed pronounced seasonal fluctuations in phytoncide composition.In September,terpenoids,esters,alcohols,and alkanes displayed a diurnal "decrease-increase" trend,whereas aldehydes and ketones peaked at midday.Notably,esters and alcohols were undetectable in November and January.By January,terpenoids reached their lowest proportion(0.17±0.02%) at noon.Five terpenoids(α-pinene,myrcene,D-limonene,camphene,p-cymene) were detected in September,four(α-pinene,D-limonene,camphene,p-cymene) in November,two(D-limonene,p-cymene) in January,and only p-cymene in March.The total concentration and emission rate of the five terpenoids peaked in September afternoons at 1961.58±106.67 ng m^(-3) and653.86±35.56 ng m^(-3) h^(-1),respectively.Nocturnal emissions(32131.95±2522.21 ng m^(-3)) significantly surpassed daytime levels(14473.04±958.49 ng m^(-3)),with emission rates escalating from 1447.30±95.85 ng m^(-3) h^(-1)(day) to 5355.33±420.37 ng m^(-3) h^(-1)(night),marking a3.7-fold increase.Snowfall dramatically elevated terpenoid concentrations(pre-snowfall:158.58±14.12 ng m^(-3);post-snowfall:1080.57±57.76 ng m^(-3)) and emission rates(pre-snowfall:52.86±4.71 ng m^(-3) h^(-1);post-snowfall:360.19±19.25 ng m^(-3) h^(-1)),reflecting a 6.8-fold surge.This study underscores the profound influence of light intensity,seasonal shifts,and climatic conditions on airborne phytoncide levels,offering a scientific foundation for optimizing forest therapy and ecotourism strategies.
基金supported by the National Natural Science Foundation of China(32460380,42007042)State Key Laboratory of Subtropical Silviculture(SKLSSKF2023-06)+2 种基金Natural Science Foundation of Jiangxi Province(20242BAB25389)National Undergraduate Innovation and Entrepreneurship Training Program(202410410029X)Jiangxi Province Graduate Student Innovation Special Fund Project(YC2024-S330).
文摘Urban forests are essential components of green infrastructure,however,rapid urbanization-induced changes in landscape patterns may affect their ecosystem services through complex ecological processes.A total of 184 sample plots in the built-up areas of Nanchang,China,were used as research sites.Urbanization intensities were categorized by the rate of impervious surface area,and forest types were classified into landscape and relaxation forest,attached forest(AF),road forest(RF),and ecological public welfare forest.This study aimed to explore the spatial variations in vegetation characteristics and landscape pattern indices of different forest types under rapid urbanization.The results indicated that the largest patch index(LPI),aggregation index(AI),and percentage of landscape(PLAND)in RF and AF were lower than those in the other forest types(p<0.05).With increasing urbanization intensity,the mean perimeter-area ratio increased by 130.84%,whereas the PLAND,LPI,and AI decreased by 22−86%(p<0.05).Redundancy analysis and variation partitioning suggested that the interpretation rate of landscape pattern indices for variations in vegetation characteristics increased from low to heavy urbanization areas.Especially,the landscape shape index,patch connection index,PLAND,and mean patch size were significantly correlated with vegetation characteristics(e.g.,tree richness,herb coverage,and tree height).In the future,appropriate landscape layout superiority cases should be considered in different urbanization areas and forest types;for instance,increasing the patch connection index will beneficially improve the diversity of trees and herbs in heavy urbanization areas and the RF.This study serves as a reference for maximizing the ecosystem services of urban forests.
基金supported in part by National Key R&D Program of China(2022YFB4501200),National Natural Science Foundation of China(62332018)Science and Technology Program(2024NSFTD0031,2024YFHZ0339 and 2025ZNSFSC0497).
文摘The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,allowing users to operate on already restored files while other files are still being restored.This approach improves availability during restoration tasks but suffers from a critical limitation:inconsistencies between the access sequence and the restore sequence.In many cases,the file a user needs to access at a given moment may not yet be restored,resulting in significant delays and poor user experience.To this end,we present Histore,which builds on the user’s historical access sequence to schedule the restore sequence,in order to reduce users’access delayed time.Histore includes three restore approaches:(i)the frequency-based approach,which restores files based on historical file access frequencies and prioritizes ensuring the availability of frequently accessed files;(ii)the graph-based approach,which preferentially restores the frequently accessed files as well as their correlated files based on historical access patterns,and(iii)the trie-based approach,which restores particular files based on both users’real-time and historical access patterns to deduce and restore the files to be accessed in the near future.We implement a prototype of Histore and evaluate its performance from multiple perspectives.Trace-driven experiments on two datasets show that Histore significantly reduces users’delay time by 4-700×with only 1.0%-14.5%additional performance overhead.
基金the Chinese Academy of Sciences Research Center for Ecology and Environment of Central Asia(RCEECA),the construction and joint research for the China-Tajikistan“Belt and Road”Joint Laboratory on Biodiversity Conservation and Sustainable Use(2024YFE0214200)the Shanghai Cooperation Organization Partnership and International Technology Cooperation Plan of Science and Technology Projects(2023E01018,2025E01056)the Chinese Academy of Sciences President’s International Fellowship Initiative(PIFI)(2024VBC0006).
文摘Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).
基金support from the National Natural Science Foundation of China(Grant No.61971256)。
文摘Wide-field mesoscopy provides the capabilities of cortex-wide field of view(FOV),cellular resolution and high frame rate for neuronal imaging in the mouse brain.However,inherent background fluorescence degrades the image quality and hinders neuronal signal extraction.To address this problem,we first introduce a cortex-wide,high-resolution lineillumination mesoscope with a moving slit designed for in vivo mouse brain imaging.This system achieves a 6.6×6.6 mm FOV,microscale cellular resolution,a high frame rate of 10 Hz,as well as the background rejection ability.Furthermore,we integrated patterned illumination into the system to enhance the background suppression.Experimental results show that the proposed system successfully captures neurodynamics in the living mouse brain.Compared with conventional wide-field mesoscopes,the cortex-wide patterned line-illumination mesoscope(PLIM)achieves a threefold increase in the signal-to-background ratio(SBR).With patterned illumination integrated,the SBR enhancement further reaches four-anda-half-fold.
基金Project supported by the National Natural Science Foundation of China(Nos.12102321 and 52192633)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2025JCYBMS-050)。
文摘A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.
文摘BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.
基金supported by the Department of Biotechnology,Ministry of Science and Technology,Govt.India,under grant No.BT/Coord.II/10/02/2016/22.03.2018the Indian Council of Social Science Research,New Delhi,India,for providing a short-term doctoral fellowship(RFD/Short-Term/2022-23/ENV/ST/66).
文摘Understanding spatial patterns of plant species diversity and the factors(e.g.,climate and human)that drive these patterns is essential for biodiversity conservation.We used data from 1700.1-ha forest plots in the Shettihalli tropical forest landscape of the Western Ghats biodiversity hotspot,India,to analyse tree community composition and the drivers ofα-diversity(Shannon)andβ-diversity(LCBD).Compositional patterns were visualized using Non-Metric Multidimensional Scaling(NMDS),and hybrid feature selection with structural equation modeling(SEM)was employed to evaluate the direct and indirect effects of environmental variables on diversity.NMDS identified four distinct forest types in the Shettihalli landscape:semi-evergreen,dry deciduous,moist deciduous,and plantation forests,each with distinct plant composition.Shannon diversity and ecological uniqueness was significantly higher in semi-evergreen forest than in deciduous forest plots.The SEMs explained about 79%and 39–45%of the variation inα-diversity andβ-diversity.Our analysis indicated that current diversity patterns result from multiple processes,with structure,disturbance,and edaphic parameters exerting the strongest direct and indirect effects onα-diversity.β-diversity,in contrast,was largely influenced by climate,topography,stand structure,and edaphic factors.Overall,our findings indicate that various factors(e.g.,climate,topography,and human disturbance)interact to shape tree diversity patterns in tropical forests.These findings will help develop unique conservation and management strategies for distinct forest types in tropical forest ecosystems.
基金funded by geological survey project of China Geological Survey(DD20211404)。
文摘Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.
基金the funds of the National Natural Science Foundation of China(No.51875456)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2019JM-450)+3 种基金the Young Talent fund of University Association for Science and Technology in Shaanxi,China(No.20170518)the Key Laboratory of Advanced Manufacture Technology for Automobile Parts(Chongqing University of Technology),Ministry of Education(No.2018KLMT03)Materials Science and Engineering provincial-level superior discipline funding project of Xi'an Shiyou Universitythe Program for Young Innovative Research Team in Xi'an Shiyou University(No.2015QNKYCXTD02)。
文摘Because of the complex constraint effects among layers in multi-layered metallic bellows hydroforming,the stress concentration and defects such as wrinkling and fracture may easily occur.It is a key to reveal the deformation behaviors in order to obtain a sound product.Based on the ABAQUS platform,a 3 D-FE model of the four-layered U-shaped metallic bellow hydroforming process is established and validated by experiment.The stress and strain distributions,wall thickness variations and bellow profiles of each layer in the whole process,including bulging,folding and springback stages,are studied.Then deformation behaviors of bellows under different forming conditions are discussed.It is found that the wall thinning degrees of different layer vary after hydroforming,and is the largest for the inner layer and smallest for the outer layer.At folding stage,the wall thinning degree of the crown point increases lineally,and the difference among layers increases as the process going.The displacements of the crown point decrease from the inner layer to the outer layer.After springback,the U-shaped cross section changes to a tongue shape,the change of convolution pitch is much larger than the change of convolution height,and the springback values of the inner layer are smaller than the outer layer.An increase in the internal pressure and die spacing cause the maximum wall thinning degree and springback increase.With changing of process parameters,bellows with deep convolution are easily encountered wall thinning during hydroforming and convolution distortion after springback.This research is helpful for precision forming of multi-layered bellows.
文摘U-shaped sacral fractures are rare and often difficult to diagnose primarily due to the difficulty in obtaining adequate imaging and the severe associated injuries. These fractures are highly unstable and frequently cause neurological deficits. The majority of surgeons have limited experience in management of U-shaped sacral fractures. No standard treatment protocol for U-shaped sacral fractures has been available till now. This study aimed to examine the management of U-shaped sacral fractures and the early outcomes. Clinical data of 15 consecutive patients with U-shaped sacral fracture who were admitted to our trauma center between 2009 and 2014 were retrospectively analyzed. Demographics, fracture classification, mechanism of injury and operative treatment and deformity angle were assessed. All the patients were treated with lumbopelvic fixation or （and） sacral decompression. EQ-5d score was applied to evaluate the patients＇ quality of life. Of the 15 consecutive patients with U-shaped sacral fracture, the mean age was 28.8 years （range： 15-55 years） at the time of injury. There were 6 females and 9 males. The mean follow- up time was 22.7 months （range： 9-47 months） and mean full weight-bearing time was 9.9 weeks （range： 8-14 weeks）. Ten patients received lumbopelvic fixation and sacral decompression, one lombosacral fixation, and 4 merely sacral decompression due to delayed diagnosis or surgery. The post-operation deformity angle （mean 27.87°, and range： 8°-90°） of the sacrum was smaller than that pre-operation （mean 35.67; range： 15-90） with no significance difference noted. At the latest follow-up, all patients obtained neurological recovery with different extents. Visual analogue score （VAS） was reduced from preoperative 7.07 （range： 5-9） to postoperetive 1.93 （range： 1-3）. All patients could walk without any aid after treatment. Eight patients were able to care for themselves and undertook some daily activities. Five patients had returned to work full time. In conclusion, lumbopelvic fixation is an effective method for stabilization of U-shaped sacral fractures with fewer complications developed. Effective reduction and firm fixation are the prerequisite of early mobilization and neurological recovery. Sacral decompression effectively promotes neurological recovery even in patients with old U-shaped sacral fractures.
基金provided by the National Natural Science Foundation of China(No.51404256)the National Basic Research Program of China(No.2013CB227900)Fundamental Research Funds for the Central Universities of China(No. 2014QNA51)
文摘Open U-shaped steel arch supports are commonly used in large-section static-pressure roadways in coal mines that are more than 900 m deep;however,it is very difficult to control floor heave of roadways.In this paper,a U-shaped steel closed support with an inverted U-shaped steel arch in the floor is proposed as a method for improving the support effect of the surrounding rock during the process of floor heaving.This research established a mechanical model for the U-shaped steel closed support,and determined the reaction forces at the connection of a camber angle.Using the limit load method calculated the critical buckling load of the inverted U-shaped steel arch,and use of a strength check method tested the strength of the U-shaped steel material.A numerical simulation was conducted using the finite difference software FLAC3 D.The simulation results show that the U-shaped steel closed support is able to control the floor heave of roadways,which is successfully used in the West 11-2 development roadway of the Zhuji Mine in the Huainan mining area in China.The cumulative floor heave over two years was less than50 mm.
基金National Science Foundation of China for the Financial Support for This Research under Grant Nos.51378047 and 51408027。
文摘This study proposes a novel U-shaped 65Mn steel bumper as the displacement restraining device for base-isolated structures with laminated elastomeric rubber bearings.A series of bumpers with different geometric parameters were designed and tested under monotonic and cyclic quasi-static loading protocols.The experimental results from a total of 232 specimens were analyzed to develop an analytical model to calculate the backbone curve and the maximum elastic restoring force for U-shaped 65Mn bumpers.Thus,the analytical equations to calculate the elastic,hardening,and unloading stiffness of U-shaped 65Mn bumpers,as well as their maximum elastic restoring force,are validated by using an additional ten groups of bumpers with varying radiuses.These analytical equations can accurately predict the mechanical parameters of U-shaped 65Mn steel bumpers for a design purpose.
文摘The formulae for stresses and angular displacements of U-shaped bellows overall bending in a meridian plane under pure bending moments are presented based on the general solution for slender ring shells proposed by Zhu Weiping, et al. and the solution for ring plates. The results evaluated in this paper are compared with those on EJMA (standards of the expansion joint manufacturers association) and of the experiment given by Li Tingxilz, et al.
基金Project(51378503)supported by the National Natural Science Foundation of ChinaProject(2010G018-A-3)supported by Technology Research and Development Program of the Ministry of Railways,China
文摘Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was established. Using parametric programming language, finite element calculation modules considering climate conditions, bridge site, structure dimension and material thermophysical properties were compiled. Six standard day cycles with the strongest yearly radiation among the bridge sites were selected for sectional solar temperature field calculation and temperature distributions under different temperature-sensitive parameters were compared. The results show that under the influence of sunshine, U-shape section of the beam shows obvious nonlinear distribution characteristics and the maximum cross-section temperature difference is more than 21℃; the ballast significantly reduces sunshine temperature difference of the beam and temperature peak of the bottom margin lags with the increase of ballast thickness; the maximum cross-section vertical temperature gradient appears in summer while large transverse temperature difference appears in winter.
基金supported by the Intergovernmental International Science,Technology and Innovation Cooperation Key Project of the National Key R&D Programme(2016YFE0105900)the National Natural Science Foundation of China(21576130and 11372229)Kuwait Foundation for the Advancement of Sciences(Kuwait-MIT signature project,Project code:P31475EC01)
文摘U-shaped micro-nanochannels can generate significant flow disturbance as well as locally amplified electric field, which gives itself potential to be microfluidic mixers, electrokinetic pumps,and even cell lysis process. Numerical simulation is utilized in this work to study the hidden characteristics of the U-shaped micro-nanochannel system, and the effects of key controlling parameters(the external voltage and pressure) on the device output metrics(current, maximum values of electric field, shear stress and flow velocity) were evaluated. A large portion of current flowing through the whole system goes through the nanochannels, rather than the middle part of the microchannel, with its value increasing linearly with the increase of voltage. Due to the local ion depletion near micro-nanofluidic junction, significantly enhanced electric field(as much as 15 fold at V=1 V and P_0=0) as well as strong shear stress(leading to electrokinetic flow) is generated.With increasing external pressure, both electric field and shear stress can be increased initially(due to shortening of depletion region length), but are suppressed eventually at higher pressure due to the destruction of ion depletion layer. Insights gained from this study could be useful for designing nonlinear electrokinetic pumps and other systems.
基金financial support of project on reliability and life research of typical components in rail trains (K10TZ20P0500) of CRRC Zhuzhou Electric Locomotive Research Institute.
文摘To get a full understanding of hot extrusion,solid solution treatment and aging process on the Al−0.56Mg−0.63Si alloy,the microstructure and mechanical properties of a U-shaped profile were studied through optical microscopy,scanning electrical microscopy,transmission electrical microscopy,hardness,and tensile tests.The coarse equiaxed grains existed near the profile edge as a result of the dynamic recrystallization nucleation and exceeding growth during hot extrusion.The fibrous deformed and sub-structured grains located between the two coarse grain layers,due to the occurrence of work-hardening and dynamic recovery.Perpendicular needle β′′precipitates were distributed inside the grain,and obvious precipitates-free zone appeared after aging treatment.The tensile strength,yield strength and elongation of the aged Al−Mg−Si alloy U-shaped profile were no less than 279.4 MPa,258.6 MPa,and 21.6%,respectively.The fracture morphology showed dimple rupture characteristics.The precipitates and grain boundaries played key role in the strengthening contribution.
