With prices for metal resources such as nickel and molybdenum soaring,there is a heightened sense of crisis concerning resource scarcity.While Type304,the most common stainless steel,offers excellent corrosion resista...With prices for metal resources such as nickel and molybdenum soaring,there is a heightened sense of crisis concerning resource scarcity.While Type304,the most common stainless steel,offers excellent corrosion resistance,its price is affected significantly by the cost of nickel because of its 8%nickel content.The stainless steel that has the same corrosion resistance as that of Type304 and does not contain nickel and molybdenum has been required.JFE Steel Corporation has developed a new 21%Cr-0.4%Cu stainless steel,the world's first ferritic stainless steel,which offers equivalent corrosion resistance to Type304 while containing absolutely no nickel or molybdenum,two rare metals.The newly developed steel contains 21%chromium with the addition of 0.4% copper.The development of the steel is based on a new discovery that the passive films of stainless steels could be strengthened by the synergy effect of high chromium content and copper addition.Copper addition enriches the chromium content in passive films after field exposure.Newly developed 21%Cr-0.4%Cu stainless steel is adopted for many applications as a substitution for Type304,including commercial kitchenware,building materials and industrial machinery.The steel is expected to be a new standard of a ferritic stainless steel as a substitution for Type304.展开更多
In this paper, the microstructures and mechanical properties of underwater laser welds of Type 304 stainless steel were investigated. JISY308L type filler wire was used as filler wire during welding. A gas-shielding n...In this paper, the microstructures and mechanical properties of underwater laser welds of Type 304 stainless steel were investigated. JISY308L type filler wire was used as filler wire during welding. A gas-shielding nozzle was used to form a local dry cavity surrounding the welding zone. The main results are summarized as follows: (1) The shielding condition of the local dry cavity severely affects the oxygen content of the weld, the worst shielding condition leading to the oxygen content of 800×10-6, which largely increases the oxide inclusions and somewhat reduces the ferrite content. (2) The increase of oxygen content reduces the elongation rate and reduction of area in tensile test, but has no influence on the tensile strength. (3) In appropriate shielding condition, the mechanical properties of the underwater laser welds can be as same as that in the air.展开更多
Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-st...Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.展开更多
Creep-fatigue test was carried out using smooth round bar specimens of Type 304 stainless steel. Cavities and small cracks on the cross-section of the specimen were carefully observed by a scanning laser microscope. ...Creep-fatigue test was carried out using smooth round bar specimens of Type 304 stainless steel. Cavities and small cracks on the cross-section of the specimen were carefully observed by a scanning laser microscope. Moreover, direct current electrical potential method (DC-EPM) was applied in order to evaluate non-destructively the distribution of internal cracks. The distribution evaluated by DC-EPM agrees well with the actual one. (Edited author abstract) 9 Refs.展开更多
文摘With prices for metal resources such as nickel and molybdenum soaring,there is a heightened sense of crisis concerning resource scarcity.While Type304,the most common stainless steel,offers excellent corrosion resistance,its price is affected significantly by the cost of nickel because of its 8%nickel content.The stainless steel that has the same corrosion resistance as that of Type304 and does not contain nickel and molybdenum has been required.JFE Steel Corporation has developed a new 21%Cr-0.4%Cu stainless steel,the world's first ferritic stainless steel,which offers equivalent corrosion resistance to Type304 while containing absolutely no nickel or molybdenum,two rare metals.The newly developed steel contains 21%chromium with the addition of 0.4% copper.The development of the steel is based on a new discovery that the passive films of stainless steels could be strengthened by the synergy effect of high chromium content and copper addition.Copper addition enriches the chromium content in passive films after field exposure.Newly developed 21%Cr-0.4%Cu stainless steel is adopted for many applications as a substitution for Type304,including commercial kitchenware,building materials and industrial machinery.The steel is expected to be a new standard of a ferritic stainless steel as a substitution for Type304.
基金supported by the Natural Science Foundation of Tsinghua University
文摘In this paper, the microstructures and mechanical properties of underwater laser welds of Type 304 stainless steel were investigated. JISY308L type filler wire was used as filler wire during welding. A gas-shielding nozzle was used to form a local dry cavity surrounding the welding zone. The main results are summarized as follows: (1) The shielding condition of the local dry cavity severely affects the oxygen content of the weld, the worst shielding condition leading to the oxygen content of 800×10-6, which largely increases the oxide inclusions and somewhat reduces the ferrite content. (2) The increase of oxygen content reduces the elongation rate and reduction of area in tensile test, but has no influence on the tensile strength. (3) In appropriate shielding condition, the mechanical properties of the underwater laser welds can be as same as that in the air.
文摘Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.
文摘Creep-fatigue test was carried out using smooth round bar specimens of Type 304 stainless steel. Cavities and small cracks on the cross-section of the specimen were carefully observed by a scanning laser microscope. Moreover, direct current electrical potential method (DC-EPM) was applied in order to evaluate non-destructively the distribution of internal cracks. The distribution evaluated by DC-EPM agrees well with the actual one. (Edited author abstract) 9 Refs.
