For the high precision time synchronization demand of ships, advantages and disadvantages of the present time transfer methods are analyzed, the two-way microwave time transfer （TWMTT） method is adopted to resolve t...For the high precision time synchronization demand of ships, advantages and disadvantages of the present time transfer methods are analyzed, the two-way microwave time transfer （TWMTT） method is adopted to resolve the time synchronization problem in the Naval Ship Formation. After expounding the principle and system composition of TWMTT method, the various factors influencing the synchronous precision are analyzed, such as time-interval measurement error, TWMTT equipment delay error, signal propagation error in air, and signal delay error caused by shipping. To improve the time synchronization precision, all the error sources above are deduced with mathematical measures to definite the critical one, and the signal processing measures such as Pseudo code spread spectrum time comparison signal generation technology, FFT fast acquisition technology and precise tracking technology are used into the modem which is the core equipment of the TWMTT. And, calibration method of TWMTT equipment delay are developed. Through theoretical a- nalysis and simulation verification, the precision of shipboard two-way microwave time synchroniza- tion can reach 1 ns.展开更多
This paper is concerned with design-ing symbol labeling for a low-density parity-check(LDPC)-coded delayed bit-interleaved coded modu-lation(DBICM)scheme in a two-way relay channel(TWRC).We first present some properti...This paper is concerned with design-ing symbol labeling for a low-density parity-check(LDPC)-coded delayed bit-interleaved coded modu-lation(DBICM)scheme in a two-way relay channel(TWRC).We first present some properties of symbol labeling within a phase shift keying(PSK)modula-tion.These properties reduce the candidate labeling search space.Based on this search space,we take DBICM capacity as the cost function and propose a general method for optimizing symbol labeling by em-ploying the differential evolution algorithm.Numeri-cal results show that our labeling obtains a signal-to-noise ratio(SNR)gain up to 0.45 dB with respect to Gray labeling.展开更多
Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence ...Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence of the martensitic transformation temperature span on Co content was observed.Before training,quite a narrow temperature span of the martensitic transformation,nearly independent of the Co content,was observed in all single crystals.After training the temperature span was still narrow for 8≤x≤10.9 but was obviously expanded for 10.9<x≤12.High-resolution transmission electron microscopy revealed that at the atomic scale,there exists incommensurate modulated structure in the single phase single crystals,as evidenced by nonperiodic satellite spots in the selected area electronic diffraction patterns.Moreover,the modulated wave vector of the satellite spots was increased by higher Co contents.Combining first principal calculations it was considered that the incommensurate modulated structure originates from the formation of Co-Co pairs.After training arrays of ordered dislocations with the same Burgers vector were introduced for 8≤x≤10.9 but the network of dislocations was formed for 10.9<x≤12.Based on analysis of transmission electron microscopy,geometric phase,thermodynamics,and Landau theory,it was considered that the austenite/martensite phase interface was pinned by the network of dislocations,expanding the temperature span of the martensitic transformation.This work supplies new insights for understanding the microstructure and martensitic transformation of Ni-Mn-Ga-based alloys.展开更多
Internal multiple interference,affecting both seismic data processing and interpretation,has been observed for long time.Although great progress has been achieved in developing a variety of internal-multiple-eliminati...Internal multiple interference,affecting both seismic data processing and interpretation,has been observed for long time.Although great progress has been achieved in developing a variety of internal-multiple-elimination(IME)methods,how to increase accuracy and reduce cost of IME still poses a significant challenge.A new method is proposed to effectively and efficiently eliminate internal multi-ples,along with its application in internal-multiple-eliminated-migration(IMEM),addressing this issue.This method stems from two-way wave equation depth-extrapolation scheme and associated up/down wavefield separation,which can accomplish depth-extrapolation of both up-going and down-going wavefields simultaneously,and complete internal-multiple-elimination processing,adaptively and effi-ciently.The proposed method has several features:(1)input data is same as that for conventional migration:source signature(used for migration only),macro velocity model,and receiver data,without additional requirements for source/receiver sampling;(2)method is efficient,without need of iterative calculations(which are typically needed for most of IME algorithms);and(3)method is cost effective:IME is completed in the same depth-extrapolation scheme of IMEM,without need of a separate pro-cessing and additional cost.Several synthesized data models are used to test the proposed method:one-dimensional model,horizontal layered model,multi-layer model with one curved layer,and SEG/EAGE Salt model.Additionally,we perform a sensitivity analysis of velocity using smoothed models.This analysis reveals that although the accuracy of velocity measurements impacts our proposed method,it significantly reduces internal multiple false imaging compared to traditional RTM techniques.When applied to actual seismic data from a carbonate reservoir zone,our method demonstrates superior clarity in imaging results,even in the presence of high-velocity carbonate formations,outperforming conven-tional migration methods in deep strata.展开更多
基于对英语听说能力重要性的认识,《大学英语课程教学要求》和大学英语四、六级网考都突出了英语听说能力培养在大学英语教学中的地位。Internet为听力教学提供了大量的音视频材料,如何对这些材料进行开发利用,使其能更好地服务英语听...基于对英语听说能力重要性的认识,《大学英语课程教学要求》和大学英语四、六级网考都突出了英语听说能力培养在大学英语教学中的地位。Internet为听力教学提供了大量的音视频材料,如何对这些材料进行开发利用,使其能更好地服务英语听力教学是很有意义的一个话题。作为一款免费的字幕时间轴制作软件,Visual Sub Sync在对英语视频内容发掘方面很好地满足了听写训练和协作学习的需求。展开更多
Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two l...Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.展开更多
The thermal elastic hydro dynamic （TEHD） lubrication analysis for the thrust bearing is usually conducted by combining Reynolds equation with finite element analysis （FEA）. But it is still a problem to conduct the...The thermal elastic hydro dynamic （TEHD） lubrication analysis for the thrust bearing is usually conducted by combining Reynolds equation with finite element analysis （FEA）. But it is still a problem to conduct the computation by combining computational fluid dynamics （CFD） and FEA which can simulate the TEHD more accurately. In this paper, by using both direct and separate coupled solutions together, steady TEHD lubrication considering the viscosity-temperature effect for a bidirectional thrust bearing in a pump-turbine unit is simulated combining a 3D CFD model for the oil film with a 3D FEA model for the pad and mirror plate. Cyclic symmetry condition is used in the oil film flow as more reasonable boundary conditions which avoids the oil temperature assumption at the leading and trailing edge. Deformations of the pad and mirror plate are predicted and discussed as well as the distributions of oil film thickness, pressure, temperature. The predicted temperature shows good agreement with measurements, while the pressure shows a reasonable distribution comparing with previous studies. Further analysis of the three-coupled-field reveals the reason of the high pressure and high temperature generated in the film. Finally, the influence of rotational speed of the mirror plate on the lubrication characteristics is illustrated which shows the thrust load should be balanced against the oil film temperature and pressure in optimized designs. This research proposes a thrust bearing computation method by combining CFD and FEA which can do the TEHD analysis more accurately.展开更多
The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (...The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (VATT) rotor, subjected to spatially varying inflow. Moreover, this study examined strategies on improving techniques used for mesh deformation that account for large displacement or deformation calculations. The blade's deformation for each new time step is considered in transient two-way FSI analysis, to make the design more reliable. Usually this is not considered in routine one-way FSI simulations. A rotor with four blades and 4-m diameter was modeled and numerically analyzed. We observed that two-way FSI, utilizing the strongly coupled method, was impossible for a complex model; and thereby using ANSYS-CFX and ANSYS-MECHANICAL in work bench, as given in ANSYS-WORKBENCH, helped case examples 22 and 23, by giving an error when the solution was run. To make the method possible and reduce the computational power, a novel technique was used to transfer the file in ANSYS-APDL to obtain the solution and results. Consequently, the results indicating a two-way transient FSI analysis is a time- and resource-consuming job, but with our proposed technique we can reduce the computational time. The ANSYS STRUCTURAL results also uncover that stresses and deformations have higher values for two-way FSI as compared to one-way FSI. Similarly, fluid flow CFX results for two-way FSI are closer to experimental results as compared to one-way simulation results. Additionally, this study shows that, using the proposed method we can perform coupled simulation with simple multi-node PCs (core i5).展开更多
基金Supported by the Ministerial Level Foundation(2102812)
文摘For the high precision time synchronization demand of ships, advantages and disadvantages of the present time transfer methods are analyzed, the two-way microwave time transfer （TWMTT） method is adopted to resolve the time synchronization problem in the Naval Ship Formation. After expounding the principle and system composition of TWMTT method, the various factors influencing the synchronous precision are analyzed, such as time-interval measurement error, TWMTT equipment delay error, signal propagation error in air, and signal delay error caused by shipping. To improve the time synchronization precision, all the error sources above are deduced with mathematical measures to definite the critical one, and the signal processing measures such as Pseudo code spread spectrum time comparison signal generation technology, FFT fast acquisition technology and precise tracking technology are used into the modem which is the core equipment of the TWMTT. And, calibration method of TWMTT equipment delay are developed. Through theoretical a- nalysis and simulation verification, the precision of shipboard two-way microwave time synchroniza- tion can reach 1 ns.
文摘This paper is concerned with design-ing symbol labeling for a low-density parity-check(LDPC)-coded delayed bit-interleaved coded modu-lation(DBICM)scheme in a two-way relay channel(TWRC).We first present some properties of symbol labeling within a phase shift keying(PSK)modula-tion.These properties reduce the candidate labeling search space.Based on this search space,we take DBICM capacity as the cost function and propose a general method for optimizing symbol labeling by em-ploying the differential evolution algorithm.Numeri-cal results show that our labeling obtains a signal-to-noise ratio(SNR)gain up to 0.45 dB with respect to Gray labeling.
基金support from the National Key Research and Development Program of China(Grant No.2021YFB3501402)the National Natural Science Foundation of China(Grant Nos.52250313 and 52121001)Yang Liu and Chen Si acknowledge financial support from the National Natural Science Foundation of China(Grant No.12274013).
文摘Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence of the martensitic transformation temperature span on Co content was observed.Before training,quite a narrow temperature span of the martensitic transformation,nearly independent of the Co content,was observed in all single crystals.After training the temperature span was still narrow for 8≤x≤10.9 but was obviously expanded for 10.9<x≤12.High-resolution transmission electron microscopy revealed that at the atomic scale,there exists incommensurate modulated structure in the single phase single crystals,as evidenced by nonperiodic satellite spots in the selected area electronic diffraction patterns.Moreover,the modulated wave vector of the satellite spots was increased by higher Co contents.Combining first principal calculations it was considered that the incommensurate modulated structure originates from the formation of Co-Co pairs.After training arrays of ordered dislocations with the same Burgers vector were introduced for 8≤x≤10.9 but the network of dislocations was formed for 10.9<x≤12.Based on analysis of transmission electron microscopy,geometric phase,thermodynamics,and Landau theory,it was considered that the austenite/martensite phase interface was pinned by the network of dislocations,expanding the temperature span of the martensitic transformation.This work supplies new insights for understanding the microstructure and martensitic transformation of Ni-Mn-Ga-based alloys.
基金supported by the National Natural Science Foundation of China(Grant No.42004103)Sichuan Science and Technology Program(2023NSFSC0257)the CNPC Innovation Found(2022DQ02-0306).
文摘Internal multiple interference,affecting both seismic data processing and interpretation,has been observed for long time.Although great progress has been achieved in developing a variety of internal-multiple-elimination(IME)methods,how to increase accuracy and reduce cost of IME still poses a significant challenge.A new method is proposed to effectively and efficiently eliminate internal multi-ples,along with its application in internal-multiple-eliminated-migration(IMEM),addressing this issue.This method stems from two-way wave equation depth-extrapolation scheme and associated up/down wavefield separation,which can accomplish depth-extrapolation of both up-going and down-going wavefields simultaneously,and complete internal-multiple-elimination processing,adaptively and effi-ciently.The proposed method has several features:(1)input data is same as that for conventional migration:source signature(used for migration only),macro velocity model,and receiver data,without additional requirements for source/receiver sampling;(2)method is efficient,without need of iterative calculations(which are typically needed for most of IME algorithms);and(3)method is cost effective:IME is completed in the same depth-extrapolation scheme of IMEM,without need of a separate pro-cessing and additional cost.Several synthesized data models are used to test the proposed method:one-dimensional model,horizontal layered model,multi-layer model with one curved layer,and SEG/EAGE Salt model.Additionally,we perform a sensitivity analysis of velocity using smoothed models.This analysis reveals that although the accuracy of velocity measurements impacts our proposed method,it significantly reduces internal multiple false imaging compared to traditional RTM techniques.When applied to actual seismic data from a carbonate reservoir zone,our method demonstrates superior clarity in imaging results,even in the presence of high-velocity carbonate formations,outperforming conven-tional migration methods in deep strata.
文摘基于对英语听说能力重要性的认识,《大学英语课程教学要求》和大学英语四、六级网考都突出了英语听说能力培养在大学英语教学中的地位。Internet为听力教学提供了大量的音视频材料,如何对这些材料进行开发利用,使其能更好地服务英语听力教学是很有意义的一个话题。作为一款免费的字幕时间轴制作软件,Visual Sub Sync在对英语视频内容发掘方面很好地满足了听写训练和协作学习的需求。
基金This work was supported by the National Natural Science Foundations of China(Grant 11272044)the Fundamental Research Funds for the Central Universities(Grant 2018JBM305).
文摘Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.
基金Supported by National Natural Science Foundation of China(Grant No.51439002)Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant Nos.20120002110011,20130002110072)Special Funds for Marine Renewable Energy Projects(Grant no.GHME2012GC02)
文摘The thermal elastic hydro dynamic （TEHD） lubrication analysis for the thrust bearing is usually conducted by combining Reynolds equation with finite element analysis （FEA）. But it is still a problem to conduct the computation by combining computational fluid dynamics （CFD） and FEA which can simulate the TEHD more accurately. In this paper, by using both direct and separate coupled solutions together, steady TEHD lubrication considering the viscosity-temperature effect for a bidirectional thrust bearing in a pump-turbine unit is simulated combining a 3D CFD model for the oil film with a 3D FEA model for the pad and mirror plate. Cyclic symmetry condition is used in the oil film flow as more reasonable boundary conditions which avoids the oil temperature assumption at the leading and trailing edge. Deformations of the pad and mirror plate are predicted and discussed as well as the distributions of oil film thickness, pressure, temperature. The predicted temperature shows good agreement with measurements, while the pressure shows a reasonable distribution comparing with previous studies. Further analysis of the three-coupled-field reveals the reason of the high pressure and high temperature generated in the film. Finally, the influence of rotational speed of the mirror plate on the lubrication characteristics is illustrated which shows the thrust load should be balanced against the oil film temperature and pressure in optimized designs. This research proposes a thrust bearing computation method by combining CFD and FEA which can do the TEHD analysis more accurately.
基金supported by the National Natural Science Foundation of China (Nos. 51209060 and 51106034)the ‘111’ Project Foundation from Ministry of Education and State Administration of Foreign Experts Affairs (No. B07019), Chinathe National Special Foundation for Ocean Energy (No. GHME2010CY01)
文摘The objective of this study was to develop, as well as validate the strongly coupled method (two-way fluid structural interaction (FSI)) used to simulate the transient FSI response of the vertical axis tidal turbine (VATT) rotor, subjected to spatially varying inflow. Moreover, this study examined strategies on improving techniques used for mesh deformation that account for large displacement or deformation calculations. The blade's deformation for each new time step is considered in transient two-way FSI analysis, to make the design more reliable. Usually this is not considered in routine one-way FSI simulations. A rotor with four blades and 4-m diameter was modeled and numerically analyzed. We observed that two-way FSI, utilizing the strongly coupled method, was impossible for a complex model; and thereby using ANSYS-CFX and ANSYS-MECHANICAL in work bench, as given in ANSYS-WORKBENCH, helped case examples 22 and 23, by giving an error when the solution was run. To make the method possible and reduce the computational power, a novel technique was used to transfer the file in ANSYS-APDL to obtain the solution and results. Consequently, the results indicating a two-way transient FSI analysis is a time- and resource-consuming job, but with our proposed technique we can reduce the computational time. The ANSYS STRUCTURAL results also uncover that stresses and deformations have higher values for two-way FSI as compared to one-way FSI. Similarly, fluid flow CFX results for two-way FSI are closer to experimental results as compared to one-way simulation results. Additionally, this study shows that, using the proposed method we can perform coupled simulation with simple multi-node PCs (core i5).
