The sealing capacity of caprock is critical for preventing CO_(2)migration and ensuring the safety of geological storage.However,existing research lacks a comprehensive overview of its sealing mechanisms and failure r...The sealing capacity of caprock is critical for preventing CO_(2)migration and ensuring the safety of geological storage.However,existing research lacks a comprehensive overview of its sealing mechanisms and failure risks.Here,recent findings on caprock sealing mechanisms,its influencing factors,failure risks,and evaluation methods are summarized.The main results include the following:(i)Caprock sealing mechanisms include capillary,hydraulic,hydrocarbon concentration,and hydrate sealing.(ii)Capillary and hydrate sealing block fluid-phase CO_(2),hydrocarbon concentration sealing prevents diffusive CO_(2),and hydraulic sealing prevents fluid and water-soluble phases.(iii)The sealing capacity is influenced by the storage site,stratigraphic environment,and caprock properties,with breakthrough pressure ranked as follows:gypsum rock>salt rock>mudstone/shale>limestone>silty mudstone.(iv)Diffusion leakage occurs when the diffusion coefficients is less than 10^(-12)m^(2)/s,the seepage leakage ranges between 10^(-8)m^(2)/s and 10^(-12)m^(2)/s,and the fracture leakage is greater than 10^(-8)m^(2)/s.(v)Hydro-mechanical(HM)coupling mechanisms,including CO_(2)diffusion,breakthrough migration,uplift deformation,and fracture flow,are essential for leakage risk simulations.Future research should address sealing mechanisms under complex conditions,define leakage risk thresholds,optimize multiphysical coupling computations,and implement effective engineering solutions to mitigate leakage risk.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
Fault sealing capacity is controlled by present-day geometry and clay content,with current research focusing on enhancing the accuracy of capacity estimates.The mechanisms for evaluating both presentday and paleo-seal...Fault sealing capacity is controlled by present-day geometry and clay content,with current research focusing on enhancing the accuracy of capacity estimates.The mechanisms for evaluating both presentday and paleo-sealing are consistent,where the current sealing capacity representing the final stage in the evolutionary process of fault sealing.To address the limitations of the conventional shale gouge ratio(SGR)in evaluating the dynamic nature of fault sealing,this study proposes a visual model for fault sealing evolution.Fault sealing evolution is jointly controlled by the burial history and clay smear history and exerts a critical influence on hydrocarbon migration and accumulation.Hydrocarbon exploration data confirm that fault sealing during and after hydrocarbon migration critically impacts reservoir preservation.If faults remain unsealed during hydrocarbon migration and accumulation,they serve solely as conduits,with their present-day sealing capacity having limited impact.Effective fault sealing thus depends on the alignment between the evolutionary sealing stages and hydrocarbon activity.Building on this framework,we propose a method to visually and quantitatively characterize the fault sealing evolution alongside hydrocarbon activity.A case study of the Xishanyao Formation in the Houxia Basin highlights that the F4 fault transitioned from being over-open to sealed at the onset of hydrocarbon migration,thereby preserving the trap,while the F8-2 fault underwent a complete sealed–reopen cycle,with the late-stage reopening leading to an absence of hydrocarbon accumulation.This temporal contrast forms the basis for a new time-sensitive methodology for assessing fault-seal integrity in complex structural settings.展开更多
Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluat...Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.展开更多
In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal）...In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal） isproposed and a laboratory study is conducted to design and evaluate te fog-sealed chip seal. First, the evaluation indices and methods of te chip seal on steel bridge deck pavement were proposed. Secondly, the worst pavement conditions during te maintenance time were simulated by te small traffic load simulation system MMLS3 and the short-term aging test for minimizing the failure probability of chip seal. Finally, the design parameters of fog-sealed chip seal were determined by the experimental analysis and the performance of the designed fog-sealed chip seal was evaluated in thelaboratory. Results indicate that the proposed simulation method of pavement conditions is effective and the maximal load repetitions on the EAPslab specimen are approximately 925 300 times. Moreover, the designed fog-sealedchip sealcan provide a dense surface with sufficient skid resistance,aggregate-asphalt aahesive performance and interlayer shearing resistance.展开更多
This paper addresses the issue of reciprocating compressors staggered labyrinth seal structure. The internal flow field of sealed structure, the displacement of cylinder and piston for different tooth profile angles a...This paper addresses the issue of reciprocating compressors staggered labyrinth seal structure. The internal flow field of sealed structure, the displacement of cylinder and piston for different tooth profile angles are analyzed synchronously using FLUENT software, and the effects of fluid-structure interaction on the performance of the labyrinth seal are revealed. The results indicate that with the growth of tooth profile angle, the leakage rate of labyrinth seal tends to decrease first, and then increase. The results of fluid-structure interaction analysis are close to those of actual engineering. The effect of fluid-structure interaction makes tiny deformation in calculation mesh of piston and cylinder structure, and the coupling interaction affects the performance of the labyrinth seal.展开更多
Based on Biot’s wave equation, this paper discusses the transient response of a spherical cavity with a partially sealed shell embedded in viscoelastic saturated soil. The analytical solution is derived for the trans...Based on Biot’s wave equation, this paper discusses the transient response of a spherical cavity with a partially sealed shell embedded in viscoelastic saturated soil. The analytical solution is derived for the transient response to an axisymmetric surface load and fluid pressure in Laplace transform domain. Numerical results are obtained by inverting the Laplace transform presented by Durbin, and are used to analyze the influences of the partial permeable property of boundary and relative rigidity of shell and soil on the transient response of the spherical cavity. It is shown that the influence of these two parameters is remarkable. The available solutions of permeable and impermeable boundary without shell are only two extreme cases of this paper.展开更多
Although magnetotelluric sounding method applied to the land is advanced, there are many difficulties when it is applied to marine environment, one of which is how to lay magnetic field sensors down to the seafloor to...Although magnetotelluric sounding method applied to the land is advanced, there are many difficulties when it is applied to marine environment, one of which is how to lay magnetic field sensors down to the seafloor to complete measurements. To protect the magnetic field sensors from intense erosion and high pressure, suitable high-pressure sealed cabins must be designed to load them. For the consideration of magnetic measurement and marine operation, the sealed pressure cabin should be nonmagnetic and transportable. Among all optional materials, LC4 super.hard aluminum alloy has the highest performance of price/quality ratio to make the sealed pressure cabin. However, it does not mean that the high-pressure sealed cabin made using LC4 will be perfect in performance. In fact, because of its weak magnetism, the pressure cabin made using LC4 has distorting effect on frequency responses of the magnetic field sensors sealed in it. This distorting effect does not affect the use of the magnetic field sensor, but if we want to eliminate its effect, we should study it by experimental measurements. In our experiment tests, frequency sweep magnetic field as excitation signal was used, and then responses of the magnetic field sensor before and after being loaded into the high-pressure sealed cabin were measured. Finally, normalized abnormal curves for the frequency responses were obtained, through which we could show how the high-pressure sealed cabin produces effects on the responses of the magnetic field sensor. Experimental results suggest that the response distortion induced by the sealed pressure cabin appears on mid- and high-frequency areas. Using experimental results as standardization data, the frequency responses collected from seafloor magnetotelluric measurements can be corrected to restore real information about the seafloor field source.展开更多
Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of i...Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of in-situ sealing of PEO coatings by four-layer voltage and sol addition.The morphology and structure were characterized by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and X-ray diffractometer (XRD).Image-Pro Plus 6.0 was used to determine the porosity of the coating,which was decreased from 8.53%to 0.51%.Simultaneously,the coating thickness was increased by a factor of four.The anti-corrosion performance of each sample was evaluated using electrochemical tests,and the findings revealed that the corrosion current density of coatings (i_(corr)) of the samples were lowered from 9.152×10^(-2) to 6.152×10^(-4) mA·cm^(-2),and the total resistance (R_(T)) of the samples were enhanced from 2.19×10^(4) to 2.33×10^(5)Ω·cm^(2).The salt spray test used to simulate the actual environment showed that corrosion points appeared on the surface of the coating only at the 336 h.In addition,the mechanism of PEO self-sealing behavior was described in this article.展开更多
The paper presented assessment of sealed fire states in underground coal mines by so-called 'fire characteristic', which graphically described tendencies of fire gas components-oxygen, nitrogen, carbon dioxide...The paper presented assessment of sealed fire states in underground coal mines by so-called 'fire characteristic', which graphically described tendencies of fire gas components-oxygen, nitrogen, carbon dioxide, carbon monoxide and hydrocarbons-in time. In order to mark gas components tendencies in time the authors applied the time series analysis. The case studied confirmed, that analysis of fire gas components tendencies in time and their correlation allow to elicit proper conclusions about fire state assessment. Assessment of fire states based on single value of fire indexes without considering their trends in time and correlation between trends of gas components would give wrong results The suggested method can appropriately indicate fire states in a sealed area.展开更多
Anodic oxide films grown on titanium alloy Ti-10V-2Fe-3Al in the solution of sodium tartrate, then sealed in boiling deionised water and calcium acetate solution were observed by using field emission scanning electron...Anodic oxide films grown on titanium alloy Ti-10V-2Fe-3Al in the solution of sodium tartrate, then sealed in boiling deionised water and calcium acetate solution were observed by using field emission scanning electron microscopy （FE-SEM）, and were chemically analysed by using energy dispersive spectroscopy （EDS）. Corrosion behaviour was investigated in a 3.5% sodium chloride solution, using electrochemical impedance spectroscopy （EIS）. The morphology of the anodic oxide films was dependent on the sealing processes. The surface sealed in calcium acetate solution presented a more homogeneous and smooth structure compared with that sealed in boiling deionised water. The corrosion resistance of the oxide films sealed in calcium acetate solution was better than that sealed in boiling deionised water.展开更多
Oxygen consumption is a fundamental component of metabolic networks, mitochondrial function, and global carbon cycling. To date there is no method available that allows for replicate measurements on attached and unatt...Oxygen consumption is a fundamental component of metabolic networks, mitochondrial function, and global carbon cycling. To date there is no method available that allows for replicate measurements on attached and unattached biological samples without compensation for extraneous oxygen leaking into the system. Here we present the Respiratory Detection System, which is compatible with virtually any biological sample. The RDS can be used to measure oxygen uptake in microliter-scale volumes with a reversibly sealed sample chamber, which contains a porphyrin-based oxygen sensor. With the RDS, one can maintain a diffusional seal for up to three hours, allowing for the direct measurement of respiratory function of samples with fast or slow metabolic rates. The ability to easily measure oxygen uptake in small volumes with small populations or dilute samples has implications in cell biology, environmental biology, and clinical diagnostics.展开更多
A new pressure-calibration method for calibrating the reduction of second harmonic(2f)amplitude caused by pressure broadening effect in sealed microbial growth environment is present.The new method combines with linew...A new pressure-calibration method for calibrating the reduction of second harmonic(2f)amplitude caused by pressure broadening effect in sealed microbial growth environment is present.The new method combines with linewidth compensation and modulation depth compensation and makes the 2f amplitude accurately retrieve metabolic CO_(2) in microbial growth.In order to verify the method,a simulation experiment is developed,in which the increasing CO_(2) concentration leads to the increasing pressure.Comparing with the relation between the traditional 2f amplitude and gas concentration,there is a monotonous relation between the calibrated 2f amplitude and CO_(2) concentration,particularly,a linear relation is present when the CO_(2) concentration is replaced with the CO_(2) particle number.In terms of microbial measurement,the growth of Escherichia coli is measured,and the culture bottle is sealed during the microbial growth process.The experimental results show that,comparing to the microbial growth retrieved by traditional 2f amplitude,the calibrated 2f amplitude can accurately retrieve microbial growth in sealed environment.展开更多
An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coati...An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coatings was comprehensively evaluated based on both anti-corrosion and anti-biofouling properties.The results reveal that the sealing treatment is remarkably useful to decrease the porosity of the coating,and the porosity of the coating sealed with the hybrid agent is only 0.035%.Immersion corrosion test and Tafel polarization test reveal that the sealed coating with the hybrid agent exhibits a better corrosion resistance by compared with the coating sealed with silicone agent.The corrosion current density i_(corr) of the hybrid agent sealed coating is only 0.7×10^(-6)A·cm^(-2).Moreover,anti-biofouling tests both in the outdoor analogue hydraulic environment and in the natural marine environment prove that the mentioned novel coating presents a better combination of corrosion resistance and anti-biofouling property by compared with the other coatings,and it could be used as a protection of metal components in the marine environment.展开更多
Surface films that formed on molten AZ91D magnesium alloy in S02/air cover gases at 680 ℃ in a sealed furnace were characterized by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and ...Surface films that formed on molten AZ91D magnesium alloy in S02/air cover gases at 680 ℃ in a sealed furnace were characterized by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and Auger electron spectroscopy. It is revealed that the film formed on molten AZ91D alloy surface in cover gas with high air content can prevent the molten AZ91D alloy from oxidation and ignition. The surface film contained three elements, namely magnesium, oxygen and sulfur, and was mainly composed of MgO and MgS. The properties of the film depended on air content in the cover gas and holding time. Thermodynamic calculation showed that MgSO4 was the stable phase, and it was concluded that the formation of MgS04 was important for the formation of the protective surface film in S02/air atmospheres.展开更多
For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is pre...For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is presented. For gas mixture with chlorine larger than 3%, the emission intensity increases with the sealed gas temperature, while with chlorine about 2%, the emission intensity decreases with the increase in the gas temperature, and could be improved by cooling water. However, if chlorine is less than 1.5%, the discharge appears to be a mixture mode with filaments distributed in a diffused glow-like discharge, and the UV emission is independent on the gas temperature.展开更多
The elimination of toxic materials in sealing methods for anodic films on 1070 aluminum alloy was studied. The new process uses chemical treatments in cerium solution and an electrochemical treatment in a molybdate so...The elimination of toxic materials in sealing methods for anodic films on 1070 aluminum alloy was studied. The new process uses chemical treatments in cerium solution and an electrochemical treatment in a molybdate solution. Potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) were used to study the influences of sealing methods on the corrosion behavior of anodic films in NaCl solutions. The results show that the Ce-Mo sealing makes the surface structure and morphology of anodic films uniform and compact. Ce and Mo produce a cooperative effect to improve the corrosion resistance of anodic films. Anodic films sealed by Ce-Mo provide high corrosion resistance both in acidic and basic solutions.展开更多
A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength...A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength.The optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface methodology.The effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious materials.The best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%quercetin.The compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,respectively.The initial time and final setting time are 41 and 57 minutes,respectively.According to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.展开更多
Heat sealing properties are optimized by controlling temperature, pressure and dwell time, while film strength depends on the drawn ratio and the molecular orientation of the film. However, heat seal strength of polym...Heat sealing properties are optimized by controlling temperature, pressure and dwell time, while film strength depends on the drawn ratio and the molecular orientation of the film. However, heat seal strength of polymer films with high drawn ratio shows lower peel strength, because the adhesion of films needs a higher heat sealing energy for molecular orientation relaxation at heat sealing. In the present study, polypropylene films with a drawn ratio of 1.0×, 1.5×, and 2.5× are heat sealed by using the heat sealing technique. The heat sealing condition is set to heat sealing time 1.0 s, sealing pressure 0.2 MPa, and heat sealing temperature 145°C. The effect of drawn ratio and stabilization temperature of PP films for peel strength are investigated using T-Peel test, DSC, FT-IR, and Raman spectroscopy. As a result, it is found that the peel strength is decreased with increasing the drawn ratio and stabilization temperature of PP films. The difference of ?H and melting point from the result of DSC measurement are exhibited for 1.5× drawn ratio film as compared with 2.5× one. In addition, FT-IR imaging and Raman line mapping reveal the influence and variation of high order structure for heat sealed parts of the drawn PP films.展开更多
Published research is minimal on vibration characteristics of hermetically sealed electromagnetic relay (EMR) ex- posed to mechanical environment. The vibration characteristics of armature system, link contact system ...Published research is minimal on vibration characteristics of hermetically sealed electromagnetic relay (EMR) ex- posed to mechanical environment. The vibration characteristics of armature system, link contact system with electromagnetic system will cause EMR malfunction. The nonlinear dynamics model of armature systems was studied by considering electro- magnetic attraction force and opposite mechanical force in this paper. Angular displacements of armature under different sinu- soidal vibration conditions are solved in order to obtain the failure mode result from armature system. Vibration tests showed the presented analyzing method is suitable for EMR. The conclusions are instructive for increasing vibration resistance of armature systems of EMR, and are significant for reliability design of switch apparatus.展开更多
基金supported by the Joint Funds of the National Natural Science Foundation of China(Grant No.U23A20671)the Major Project of Inner Mongolia Science and Technology,China(Grant No.2021ZD0034)the Creative Groups of Natural Science Foundation of Hubei Province(Grant No.2021CFA030).
文摘The sealing capacity of caprock is critical for preventing CO_(2)migration and ensuring the safety of geological storage.However,existing research lacks a comprehensive overview of its sealing mechanisms and failure risks.Here,recent findings on caprock sealing mechanisms,its influencing factors,failure risks,and evaluation methods are summarized.The main results include the following:(i)Caprock sealing mechanisms include capillary,hydraulic,hydrocarbon concentration,and hydrate sealing.(ii)Capillary and hydrate sealing block fluid-phase CO_(2),hydrocarbon concentration sealing prevents diffusive CO_(2),and hydraulic sealing prevents fluid and water-soluble phases.(iii)The sealing capacity is influenced by the storage site,stratigraphic environment,and caprock properties,with breakthrough pressure ranked as follows:gypsum rock>salt rock>mudstone/shale>limestone>silty mudstone.(iv)Diffusion leakage occurs when the diffusion coefficients is less than 10^(-12)m^(2)/s,the seepage leakage ranges between 10^(-8)m^(2)/s and 10^(-12)m^(2)/s,and the fracture leakage is greater than 10^(-8)m^(2)/s.(v)Hydro-mechanical(HM)coupling mechanisms,including CO_(2)diffusion,breakthrough migration,uplift deformation,and fracture flow,are essential for leakage risk simulations.Future research should address sealing mechanisms under complex conditions,define leakage risk thresholds,optimize multiphysical coupling computations,and implement effective engineering solutions to mitigate leakage risk.
基金financially supported by the National Nature Science Foundation of China (62504130)National Key Research and Development Program of China (2018YFB0704100)+3 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong (Y01256331)the Technology Development Project of Henan Province (252102240047)the Pico Center at SUSTech CRF which receives support from the Presidential FundDevelopment and Reform Commission of Shenzhen Municipality
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金funded by the Project of Xinjiang University of Technology(No.2025XQYM044)PetroChina Coalbed Methane Company Project(No.WK23020DG04)。
文摘Fault sealing capacity is controlled by present-day geometry and clay content,with current research focusing on enhancing the accuracy of capacity estimates.The mechanisms for evaluating both presentday and paleo-sealing are consistent,where the current sealing capacity representing the final stage in the evolutionary process of fault sealing.To address the limitations of the conventional shale gouge ratio(SGR)in evaluating the dynamic nature of fault sealing,this study proposes a visual model for fault sealing evolution.Fault sealing evolution is jointly controlled by the burial history and clay smear history and exerts a critical influence on hydrocarbon migration and accumulation.Hydrocarbon exploration data confirm that fault sealing during and after hydrocarbon migration critically impacts reservoir preservation.If faults remain unsealed during hydrocarbon migration and accumulation,they serve solely as conduits,with their present-day sealing capacity having limited impact.Effective fault sealing thus depends on the alignment between the evolutionary sealing stages and hydrocarbon activity.Building on this framework,we propose a method to visually and quantitatively characterize the fault sealing evolution alongside hydrocarbon activity.A case study of the Xishanyao Formation in the Houxia Basin highlights that the F4 fault transitioned from being over-open to sealed at the onset of hydrocarbon migration,thereby preserving the trap,while the F8-2 fault underwent a complete sealed–reopen cycle,with the late-stage reopening leading to an absence of hydrocarbon accumulation.This temporal contrast forms the basis for a new time-sensitive methodology for assessing fault-seal integrity in complex structural settings.
基金Supported by National Natural Science Foundation of China(Grant No.51975315)National Science and Technology Major Project of China(Grant No.2019-IV-0020-0088).
文摘Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.
基金The National Natural Science Foundation of China(No.51378122)
文摘In order to improve the surface performace of epoxy asphalt pavement （EAP） for steel bridge deck, an epoxy asphalt chip seal （ ECS） covered by a cationic emulsified asphalt fog seal （i. e., fog-sealed chip seal） isproposed and a laboratory study is conducted to design and evaluate te fog-sealed chip seal. First, the evaluation indices and methods of te chip seal on steel bridge deck pavement were proposed. Secondly, the worst pavement conditions during te maintenance time were simulated by te small traffic load simulation system MMLS3 and the short-term aging test for minimizing the failure probability of chip seal. Finally, the design parameters of fog-sealed chip seal were determined by the experimental analysis and the performance of the designed fog-sealed chip seal was evaluated in thelaboratory. Results indicate that the proposed simulation method of pavement conditions is effective and the maximal load repetitions on the EAPslab specimen are approximately 925 300 times. Moreover, the designed fog-sealedchip sealcan provide a dense surface with sufficient skid resistance,aggregate-asphalt aahesive performance and interlayer shearing resistance.
基金the Science and Technology Projects of Liaoning Province(No.2012219020)the China Postdoctoral Science Foundation(No.2013M541249)
文摘This paper addresses the issue of reciprocating compressors staggered labyrinth seal structure. The internal flow field of sealed structure, the displacement of cylinder and piston for different tooth profile angles are analyzed synchronously using FLUENT software, and the effects of fluid-structure interaction on the performance of the labyrinth seal are revealed. The results indicate that with the growth of tooth profile angle, the leakage rate of labyrinth seal tends to decrease first, and then increase. The results of fluid-structure interaction analysis are close to those of actual engineering. The effect of fluid-structure interaction makes tiny deformation in calculation mesh of piston and cylinder structure, and the coupling interaction affects the performance of the labyrinth seal.
文摘Based on Biot’s wave equation, this paper discusses the transient response of a spherical cavity with a partially sealed shell embedded in viscoelastic saturated soil. The analytical solution is derived for the transient response to an axisymmetric surface load and fluid pressure in Laplace transform domain. Numerical results are obtained by inverting the Laplace transform presented by Durbin, and are used to analyze the influences of the partial permeable property of boundary and relative rigidity of shell and soil on the transient response of the spherical cavity. It is shown that the influence of these two parameters is remarkable. The available solutions of permeable and impermeable boundary without shell are only two extreme cases of this paper.
基金This paper is supported by the National "863" Program in the Tenth Five-Year-Plan (No. 2002AA615020)Eleventh Five-Year-Plan (No. 2006AA09A201)the Focused Subject Program of Beijing (No. XK104910598).
文摘Although magnetotelluric sounding method applied to the land is advanced, there are many difficulties when it is applied to marine environment, one of which is how to lay magnetic field sensors down to the seafloor to complete measurements. To protect the magnetic field sensors from intense erosion and high pressure, suitable high-pressure sealed cabins must be designed to load them. For the consideration of magnetic measurement and marine operation, the sealed pressure cabin should be nonmagnetic and transportable. Among all optional materials, LC4 super.hard aluminum alloy has the highest performance of price/quality ratio to make the sealed pressure cabin. However, it does not mean that the high-pressure sealed cabin made using LC4 will be perfect in performance. In fact, because of its weak magnetism, the pressure cabin made using LC4 has distorting effect on frequency responses of the magnetic field sensors sealed in it. This distorting effect does not affect the use of the magnetic field sensor, but if we want to eliminate its effect, we should study it by experimental measurements. In our experiment tests, frequency sweep magnetic field as excitation signal was used, and then responses of the magnetic field sensor before and after being loaded into the high-pressure sealed cabin were measured. Finally, normalized abnormal curves for the frequency responses were obtained, through which we could show how the high-pressure sealed cabin produces effects on the responses of the magnetic field sensor. Experimental results suggest that the response distortion induced by the sealed pressure cabin appears on mid- and high-frequency areas. Using experimental results as standardization data, the frequency responses collected from seafloor magnetotelluric measurements can be corrected to restore real information about the seafloor field source.
基金financially supported by the Guangxi Natural Science Foundation(No.2020GXNSFAA159011)the National Natural Science Foundation of China(No.51664011)。
文摘Plasma electrochemical oxidation (PEO) is a surface modification technology to form ceramic coatings on magnesium alloys However,its application is limited due to its defects.This work reports a novel preparation of in-situ sealing of PEO coatings by four-layer voltage and sol addition.The morphology and structure were characterized by scanning electron microscopy (SEM),energy dispersive X-ray spectroscopy (EDS),and X-ray diffractometer (XRD).Image-Pro Plus 6.0 was used to determine the porosity of the coating,which was decreased from 8.53%to 0.51%.Simultaneously,the coating thickness was increased by a factor of four.The anti-corrosion performance of each sample was evaluated using electrochemical tests,and the findings revealed that the corrosion current density of coatings (i_(corr)) of the samples were lowered from 9.152×10^(-2) to 6.152×10^(-4) mA·cm^(-2),and the total resistance (R_(T)) of the samples were enhanced from 2.19×10^(4) to 2.33×10^(5)Ω·cm^(2).The salt spray test used to simulate the actual environment showed that corrosion points appeared on the surface of the coating only at the 336 h.In addition,the mechanism of PEO self-sealing behavior was described in this article.
文摘The paper presented assessment of sealed fire states in underground coal mines by so-called 'fire characteristic', which graphically described tendencies of fire gas components-oxygen, nitrogen, carbon dioxide, carbon monoxide and hydrocarbons-in time. In order to mark gas components tendencies in time the authors applied the time series analysis. The case studied confirmed, that analysis of fire gas components tendencies in time and their correlation allow to elicit proper conclusions about fire state assessment. Assessment of fire states based on single value of fire indexes without considering their trends in time and correlation between trends of gas components would give wrong results The suggested method can appropriately indicate fire states in a sealed area.
基金Supported by the National Natural Science Foundation of China(No.51271012)
文摘Anodic oxide films grown on titanium alloy Ti-10V-2Fe-3Al in the solution of sodium tartrate, then sealed in boiling deionised water and calcium acetate solution were observed by using field emission scanning electron microscopy （FE-SEM）, and were chemically analysed by using energy dispersive spectroscopy （EDS）. Corrosion behaviour was investigated in a 3.5% sodium chloride solution, using electrochemical impedance spectroscopy （EIS）. The morphology of the anodic oxide films was dependent on the sealing processes. The surface sealed in calcium acetate solution presented a more homogeneous and smooth structure compared with that sealed in boiling deionised water. The corrosion resistance of the oxide films sealed in calcium acetate solution was better than that sealed in boiling deionised water.
文摘Oxygen consumption is a fundamental component of metabolic networks, mitochondrial function, and global carbon cycling. To date there is no method available that allows for replicate measurements on attached and unattached biological samples without compensation for extraneous oxygen leaking into the system. Here we present the Respiratory Detection System, which is compatible with virtually any biological sample. The RDS can be used to measure oxygen uptake in microliter-scale volumes with a reversibly sealed sample chamber, which contains a porphyrin-based oxygen sensor. With the RDS, one can maintain a diffusional seal for up to three hours, allowing for the direct measurement of respiratory function of samples with fast or slow metabolic rates. The ability to easily measure oxygen uptake in small volumes with small populations or dilute samples has implications in cell biology, environmental biology, and clinical diagnostics.
基金the National Key Research and Development Program of China(Grant Nos.2017YFC0209700 and 2016YFC0303900)the National Natural Science Foundation of China(Grant No.41730103).
文摘A new pressure-calibration method for calibrating the reduction of second harmonic(2f)amplitude caused by pressure broadening effect in sealed microbial growth environment is present.The new method combines with linewidth compensation and modulation depth compensation and makes the 2f amplitude accurately retrieve metabolic CO_(2) in microbial growth.In order to verify the method,a simulation experiment is developed,in which the increasing CO_(2) concentration leads to the increasing pressure.Comparing with the relation between the traditional 2f amplitude and gas concentration,there is a monotonous relation between the calibrated 2f amplitude and CO_(2) concentration,particularly,a linear relation is present when the CO_(2) concentration is replaced with the CO_(2) particle number.In terms of microbial measurement,the growth of Escherichia coli is measured,and the culture bottle is sealed during the microbial growth process.The experimental results show that,comparing to the microbial growth retrieved by traditional 2f amplitude,the calibrated 2f amplitude can accurately retrieve microbial growth in sealed environment.
基金the National Natural Science Foundation of China(No.51379070)the Graduate Research and Innovation Projects of Jiangsu Province(No.KYCX21_0463)。
文摘An organic-inorganic hybrid sealing agent was fabricated and used in the plasma sprayed Al_(2)O_(3)-13 wt%TiO_(2)coating,and conventional silicone agent was also used for comparison.Protection performance of the coatings was comprehensively evaluated based on both anti-corrosion and anti-biofouling properties.The results reveal that the sealing treatment is remarkably useful to decrease the porosity of the coating,and the porosity of the coating sealed with the hybrid agent is only 0.035%.Immersion corrosion test and Tafel polarization test reveal that the sealed coating with the hybrid agent exhibits a better corrosion resistance by compared with the coating sealed with silicone agent.The corrosion current density i_(corr) of the hybrid agent sealed coating is only 0.7×10^(-6)A·cm^(-2).Moreover,anti-biofouling tests both in the outdoor analogue hydraulic environment and in the natural marine environment prove that the mentioned novel coating presents a better combination of corrosion resistance and anti-biofouling property by compared with the other coatings,and it could be used as a protection of metal components in the marine environment.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education under Grant No.20090002110029the High Technology Research and Development Program of China under Grant No.2009AA03Z114the MOST(Ministry of Science and Technology)of China under Grant No.2010DFA72760
文摘Surface films that formed on molten AZ91D magnesium alloy in S02/air cover gases at 680 ℃ in a sealed furnace were characterized by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and Auger electron spectroscopy. It is revealed that the film formed on molten AZ91D alloy surface in cover gas with high air content can prevent the molten AZ91D alloy from oxidation and ignition. The surface film contained three elements, namely magnesium, oxygen and sulfur, and was mainly composed of MgO and MgS. The properties of the film depended on air content in the cover gas and holding time. Thermodynamic calculation showed that MgSO4 was the stable phase, and it was concluded that the formation of MgS04 was important for the formation of the protective surface film in S02/air atmospheres.
基金This work is supported by Jiangsu Suzhou Purification Group Co.Ltd.
文摘For dielectric barrier discharge lamps filled with various gas mixture ratios, the correlations between the excimer XeCl* emission and the sealed gas temperature have been founded, and a qualitative explication is presented. For gas mixture with chlorine larger than 3%, the emission intensity increases with the sealed gas temperature, while with chlorine about 2%, the emission intensity decreases with the increase in the gas temperature, and could be improved by cooling water. However, if chlorine is less than 1.5%, the discharge appears to be a mixture mode with filaments distributed in a diffused glow-like discharge, and the UV emission is independent on the gas temperature.
基金Project(50571006) supported by the National Natural Science Foundation of China
文摘The elimination of toxic materials in sealing methods for anodic films on 1070 aluminum alloy was studied. The new process uses chemical treatments in cerium solution and an electrochemical treatment in a molybdate solution. Potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) were used to study the influences of sealing methods on the corrosion behavior of anodic films in NaCl solutions. The results show that the Ce-Mo sealing makes the surface structure and morphology of anodic films uniform and compact. Ce and Mo produce a cooperative effect to improve the corrosion resistance of anodic films. Anodic films sealed by Ce-Mo provide high corrosion resistance both in acidic and basic solutions.
基金Funded by the Key Technologies Research and Development Program(No.2021YFC28000900)the National Natural Science Foundation of China(No.52374178)the Collaborative Innovation Project of Colleges and Universities of Anhui Province(No.GXXT-2020-057)。
文摘A ternary early-strengthening agent consisting of calcium formate+triethanolamine+lithium sulfate was compounded with quercetin to shorten the setting time of cementitious materials while ensuring their early strength.The optimum ratio of the three early-strengthening agents was determined as 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate by response surface methodology.The effects of the ternary early-strengthening agent composed of calcium formate+triethanolamine(TEA)+lithium sulfate on cementitious pore sealing materials under the synergistic effect of quercetin were studied by means of the performance tests of compressive strength,fluidity,and setting time,and the microstructural characterizations of X-ray powder diffractometer(XRD),thermogravimetry(TG-DSC)and scanning electron microscopy(SEM).The study shows that the synergistic effect of ternary early-strengthening agent and quercetin forms a multi-performance composite admixture for cementitious materials.The best performance was obtained with the compounding scheme of 0.5%calcium formate+0.04%triethanolamine+0.4%lithium sulfate ternary early-strengthening agent and 0.05%quercetin.The compressive strength of 1,3,7,and 28 d are 94.8%,39.8%,42%,and 28%higher than those of the blank group,respectively.The initial time and final setting time are 41 and 57 minutes,respectively.According to the microscopic analysis,the network and fibrous C-S-H gels generated by ternary early-strengthening agents are attached to the surface promoted by quercetin,which forms skeleton support while thickening and solidifying the cement slurry,which enhances the early compressive strength of the cement-based materials.
文摘Heat sealing properties are optimized by controlling temperature, pressure and dwell time, while film strength depends on the drawn ratio and the molecular orientation of the film. However, heat seal strength of polymer films with high drawn ratio shows lower peel strength, because the adhesion of films needs a higher heat sealing energy for molecular orientation relaxation at heat sealing. In the present study, polypropylene films with a drawn ratio of 1.0×, 1.5×, and 2.5× are heat sealed by using the heat sealing technique. The heat sealing condition is set to heat sealing time 1.0 s, sealing pressure 0.2 MPa, and heat sealing temperature 145°C. The effect of drawn ratio and stabilization temperature of PP films for peel strength are investigated using T-Peel test, DSC, FT-IR, and Raman spectroscopy. As a result, it is found that the peel strength is decreased with increasing the drawn ratio and stabilization temperature of PP films. The difference of ?H and melting point from the result of DSC measurement are exhibited for 1.5× drawn ratio film as compared with 2.5× one. In addition, FT-IR imaging and Raman line mapping reveal the influence and variation of high order structure for heat sealed parts of the drawn PP films.
基金Project (No. FEBQ24409102) supported by the Space Technology Innovation Fund, China
文摘Published research is minimal on vibration characteristics of hermetically sealed electromagnetic relay (EMR) ex- posed to mechanical environment. The vibration characteristics of armature system, link contact system with electromagnetic system will cause EMR malfunction. The nonlinear dynamics model of armature systems was studied by considering electro- magnetic attraction force and opposite mechanical force in this paper. Angular displacements of armature under different sinu- soidal vibration conditions are solved in order to obtain the failure mode result from armature system. Vibration tests showed the presented analyzing method is suitable for EMR. The conclusions are instructive for increasing vibration resistance of armature systems of EMR, and are significant for reliability design of switch apparatus.
