The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRE...The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRESP),is an important factor affecting the homogeneity.This study investigated the influence of the size combination and MRESP on the distribution homogeneity of particles in aggregate blend using discrete element method(DEM).An indicator quantifying the distribution homogeneity was established according to the coefficient of variation(CV)for particle number.Two-size,three-size,and four-size aggregate blends with various compositions were designed.Laboratory tests show the DEM simulation is feasible.The particle distribution homogeneity in various blends was analyzed.The results showed the distribution homogeneity of each size particles in a blend is closely related to their mass fraction.The higher the mass fraction of the particles,the more homogeneous the distribution of them.The MRESP has no significant influence on the homogeneity of the blend composed of only coarse aggregates.However,the homogeneity of the blend composed of coarse and fine aggregates improves gradually with the increase of the mass fraction of fine aggregates.The smaller the maximum particle size in a blend,the better the homogeneity.It is suggested that the mass fraction of fine aggregates should be between 33%and 50%for achieving good homogeneity of aggregate blends.The research results can provide a reference for gradation design of asphalt mixture.展开更多
This study conducts a thorough examination of honeycomb sandwich panels with a lattice core,adopting advanced computational techniques for their modeling.The research extends its analysis to investigate the natural fr...This study conducts a thorough examination of honeycomb sandwich panels with a lattice core,adopting advanced computational techniques for their modeling.The research extends its analysis to investigate the natural frequency behavior of sandwich panels,encompassing the comprehensive assessment of the entire panel structure.At its core,the research applies the Representative Volume Element(RVE)theory to establish the equivalent material properties,thereby enhancing the predictive capabilities of lattice structure simulations.Themethodology applies these properties in the core of infinite panels,which are modeled using double periodic boundary conditions to explore their natural frequencies.Expanding beyond mere material characterization,the study introduces a novel approach to defining the material within the panel cores.By incorporating alternate materials such as steel and AlSiC,and by strategically modifying their ratios,the research streamlines the process of material variation without resorting to repetitive 3D operations on the constituent cells.This optimizes not only the computational resources but also offers insights into the structural response under diverse material compositions.Furthermore,the investigation extends its scope to analyze the influence of curvature on the structural behavior of lattice structures.Panels are modeled with varying degrees of curvature,ranging from single to double curvatures,including cylindrical and spherical configurations,across a spectrum of radii.A rigorous analysis is performed to study the effect of curvature on the mechanical performance and stability of lattice structures,offering valuable insights for design optimization and structural engineering applications.By building upon the existing knowledge and introducing innovative methodologies,this study contributes to improving the understanding of lattice structures and their applicability in diverse engineering contexts.展开更多
A two-scale method is proposed to simulate the essential behavior of bolted connections in structures includingelevated temperatures.It is presented,verified,and validated for the structural behavior of two plates,con...A two-scale method is proposed to simulate the essential behavior of bolted connections in structures includingelevated temperatures.It is presented,verified,and validated for the structural behavior of two plates,connectedby a bolt,under a variety of loads and elevated temperatures.The method consists of a global-scale model thatsimulates the structure(here the two plates)by volume finite elements,and in which the bolt is modelled bya spring.The spring properties are provided by a smallscale model,in which the bolt is modelled by volumeelements,and for which the boundary conditions are retrieved from the global-scale model.To ensure the small-scale model to be as computationally efficient as possible,simplifications are discussed regarding the materialmodel and the modelling of the threads.For the latter,this leads to the experimentally validated application ofa non-threaded shank with its stress area.It is shown that a non-linear elastic spring is needed for the bolt inthe global-scale model,so the post-peak behavior of the structure can be described efficiently.All types of boltedconnection failure as given by design standards are simulated by the twoscale method,which is successfullyvalidated(except for net section failure)by experiments,and verified by a detailed system model,which modelsthe structure in full detail.The sensitivity to the size of the part of the plate used in the small-scale modelis also studied.Finally,multi-directional load cases,also for elevated temperatures,are studied with the two-scale method and verified with the detailed system model.As a result,a computationally efficient finite elementmodelling approach is provided for all possible combined load actions(except for nut thread failure and netsection failure)and temperatures.The two-scale method is shown to be insightful,for it contains a functionalseparation of scales,revealing their relationships,and consequently,local small-scale non-convergence can behandled.Not presented in this paper,but the two-scale method can be used in e.g.computationally expensive two-way coupled fire-structure simulations,where it is beneficial for distributed computing and densely packed boltconfigurations with stiffplates,for which a single small-scale model may be representative for several connections.展开更多
By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the el...By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the electroosmotic flow equations in horizontal thin slits separated by thin solid layers are approximated by a homogenized system of macroscale equations in the form of the Poisson equation for induced vertical electrical field and Onsager's reciprocity relations between global fluxes (hydrodynamic and electric) and forces (horizontal pressure gradient and external electrical field). In addition, the two-scale approach provides macroscopic mobility coefficients in the Onsager relations. On this way, the cross-coupling kinetic coefficient is obtained in a form which does involves the ζ -potential among the data provided the surface current is negligible.展开更多
Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting app...Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.展开更多
In this paper, a two-scale method （TSM） is presented for identifying the mechanics parameters such as stiffness and strength of composite materials with small periodic configuration. Firstly, a formulation is briefl...In this paper, a two-scale method （TSM） is presented for identifying the mechanics parameters such as stiffness and strength of composite materials with small periodic configuration. Firstly, a formulation is briefly given for two-scale analysis （TSA） of the composite materials. And then a two-scale computation formulation of strains and stresses is developed by displacement solution with orthotropic material coefficients for three kinds of such composites structures, i.e., the tension column with a square cross section, the bending cantilever with a rectangular cross section and the torsion column with a circle cross section. The strength formulas for the three kinds of structures are derived and the TSM procedure is discussed. Finally the numerical results of stiffness and strength are presented and compared with experimental data. It shows that the TSM method in this paper is feasible and valid for predicting both the stiffness and the strength of the composite materials with periodic configuration.展开更多
The prediction of the mechanical and electric properties of piezoelectric fibre composites has become an active research area in recent years. By means of introducing a boundary layer problem, some new kinds of two-sc...The prediction of the mechanical and electric properties of piezoelectric fibre composites has become an active research area in recent years. By means of introducing a boundary layer problem, some new kinds of two-scale finite element methods for solutions to the electric potential and the displacement for composite material in periodic struc- ture under the coupled piezoelectricity are derived. The coupled two-scale relation of the electric potential and the displacement is set up, and some finite element approximate estimates and numerical examples which show the effectiveness of the method are presented.展开更多
In order to study the failure patterns and strength of 3D braided composites from the microscopic view, the damage propagation under tensile loading steps in three kinds of unit cells is simulated. The homogenization ...In order to study the failure patterns and strength of 3D braided composites from the microscopic view, the damage propagation under tensile loading steps in three kinds of unit cells is simulated. The homogenization formula of micro-stress and the solving approach of finite element method are given firstly. A criterion is presented to determine the damage and its pattern of each element, and then the stiffness degradation method based on Murakami's geometric damage theory is used to simulate the status of damage under tensile loading steps for three kinds of unit cells. It can be seen that the damage percentage and damage pattern of damaged unit cell are totally different for different kind of unit cells. More damaged elements are observed for face cell and corner cell than that for body cell. It is also observed that the damage firstly occurs at the area of face cell, which agrees well with experimental results. It is verified that considering the effects of face and corner cells are important for the damage and strength analysis of 3D braided composites.展开更多
With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including op...With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.展开更多
Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed...Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed, one condition is the equivalence of strain energy, and the other is the deformation similarity. Based on these two homogenization conditions, an eigenelement method is presented, which is characteristic of structure-preserving property. It follows from the frequency comparisons that the eigenelement method is more accurate than the stiffness average method and the compliance average method.展开更多
In this paper,we discuss the numerical accuracy of asymptotic homogenization method(AHM)and multiscale finite element method(MsFEM)for periodic composite materials.Through numerical calculation of the model problems f...In this paper,we discuss the numerical accuracy of asymptotic homogenization method(AHM)and multiscale finite element method(MsFEM)for periodic composite materials.Through numerical calculation of the model problems for four kinds of typical periodic composite materials,the main factors to determine the accuracy of first-order AHM and second-order AHM are found,and the physical interpretation of these factors is given.Furthermore,the way to recover multiscale solutions of first-order AHM and MsFEM is theoretically analyzed,and it is found that first-order AHM and MsFEM provide similar multiscale solutions under some assumptions.Finally,numerical experiments verify that MsFEM is essentially a first-order multiscale method for periodic composite materials.展开更多
In this article, the analytical homogenization method of periodic discrete media（HPDM）and the numerical condensed wave finite element method（CWFEM） are employed to study the longitudinal and transverse vibrations ...In this article, the analytical homogenization method of periodic discrete media（HPDM）and the numerical condensed wave finite element method（CWFEM） are employed to study the longitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of frequency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.展开更多
The objective of this study is to investigate the local stress fluctuation in two-phase composite by homogenization method. The composite was described by homogeneous macro structure and periodical micro structure sin...The objective of this study is to investigate the local stress fluctuation in two-phase composite by homogenization method. The composite was described by homogeneous macro structure and periodical micro structure sinudtaneously and the mechanical response of the composite can be described based on both macro and micro dimensional scales. Micro and mocro homogenization problems can be formulated. The effective material properties of the composite and the local stress field in the microstructure of the composite can be determined by solving these equntions.展开更多
The objective of this study was to determine the overall thermal elastic behavior of composites by homogenization method. The results obtained were compared with those by other well-known methods such as mean field me...The objective of this study was to determine the overall thermal elastic behavior of composites by homogenization method. The results obtained were compared with those by other well-known methods such as mean field method , self-consistent method and etc. A good agreement is achieved and thus a reliable nwthod for predicting the effective behavior of composite is presented. It is very easy to extend this method to multi-phase composite. The materiol properties determined here include elastic modulus, Poisson ratio and thermal expansion coefficient （CTE）.展开更多
In this study,a homogenization method is employed to determine the values of effective elastic modulus for BaZrO3 which is a promising candidate material for electrolyte in solid oxide fuel cell (SOFC).Comparison betw...In this study,a homogenization method is employed to determine the values of effective elastic modulus for BaZrO3 which is a promising candidate material for electrolyte in solid oxide fuel cell (SOFC).Comparison between the homogenization and the analysis data reveals that the difference becomes significant with increasing of porosity when upper 20%.The empire mechanic behavior in a typical planar fuel cell is evaluated using finite element method (FEM).Large stress gradient occurs in vicinity of the interface of the electrolyte and the cathode due to theirs mismatch of thermal expansion coefficient (TEC).Moreover,local processing results reveal that microscopic stress concentration around pore near the interface of the electrolyte and the cathode in the cell perhaps produces cracks which may lead to the fail of the electrolyte and the lower energy convention efficiency.展开更多
The correspondence principle is an important mathematical technique to compute the non-ageing linear viscoelastic problem as it allows to take advantage of the computational methods originally developed for the elasti...The correspondence principle is an important mathematical technique to compute the non-ageing linear viscoelastic problem as it allows to take advantage of the computational methods originally developed for the elastic case. However, the correspon- dence principle becomes invalid when the materials exhibit ageing. To deal with this problem, a second-order two-scale （SOTS） computational method in the time domain is presented to predict the ageing linear viscoelastic performance of composite materials with a periodic structure. First, in the time domain, the SOTS formulation for calcu- lating the effective relaxation modulus and displacement approximate solutions of the ageing viscoelastic problem is formally derived. Error estimates of the displacement ap- proximate solutions for SOTS method are then given. Numerical results obtained by the SOTS method are shown and compared with those by the finite element method in a very fine mesh. Both the analytical and numerical results show that the SOTS computational method is feasible and efficient to predict the ageing linear viscoelastic performance of composite materials with a periodic structure.展开更多
The purpose of this paper is to solve nonselfadjoint elliptic problems with rapidly oscillatory coefficients. A two-order and two-scale approximate solution expression for nonselfadjoint elliptic problems is considere...The purpose of this paper is to solve nonselfadjoint elliptic problems with rapidly oscillatory coefficients. A two-order and two-scale approximate solution expression for nonselfadjoint elliptic problems is considered, and the error estimation of the twoorder and two-scale approximate solution is derived. The numerical result shows that the presented approximation solution is effective.展开更多
In this paper,a stochastic second-order two-scale(SSOTS)method is proposed for predicting the non-deterministic mechanical properties of composites with random interpenetrating phase.Firstly,based on random morphology...In this paper,a stochastic second-order two-scale(SSOTS)method is proposed for predicting the non-deterministic mechanical properties of composites with random interpenetrating phase.Firstly,based on random morphology description functions(RMDF),the randomness of the material properties of the constituents as well as the correlation among these random properties are fully characterized through the topologies of the constituents.Then,by virtue of multiscale asymptotic analysis,the random effective quantities such as stiffness parameters and strength parameters along with their numerical computation formulae are derived by a SSOTS strategy combined with the Monte-Carlo method.Finally,the SSOTS method developed in this paper shows an excellent computational accuracy,and therefore present an important advance towards computationally efficient multiscale modeling frameworks considering microstructure uncertainties.展开更多
This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of...This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of the problem by a statistical second-order two-scale （SSOTS） analysis method and the algorithm procedure based on the finite-element difference method are presented. Numerical results of coupled cases are compared with those of uncoupled cases. It shows that the coupling effects on temperature, thermal flux, displacement, and stresses are very distinct, and the micro- characteristics of particles affect the coupling effect of the random composites. Furthermore, the coupling effect causes a lag in the variations of temperature, thermal flux, displacement, and stresses.展开更多
Owing to the existence of distributed holes, it is difficult tosolve the bending problem of perforated plates by the conventionalfinite element method. A homogenization-based method for this problemis presented in thi...Owing to the existence of distributed holes, it is difficult tosolve the bending problem of perforated plates by the conventionalfinite element method. A homogenization-based method for this problemis presented in this paper. As an example, the bending analysis of acircular perforated plate with distributed step-wise cylindricalholes is made. The deflection and the fundamental frequen- cyobtained by present method are in good agreement with experimentaldata, this implies that the method is effective.展开更多
基金funded by the National Natural Science Foundation of China(No.51978048).
文摘The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRESP),is an important factor affecting the homogeneity.This study investigated the influence of the size combination and MRESP on the distribution homogeneity of particles in aggregate blend using discrete element method(DEM).An indicator quantifying the distribution homogeneity was established according to the coefficient of variation(CV)for particle number.Two-size,three-size,and four-size aggregate blends with various compositions were designed.Laboratory tests show the DEM simulation is feasible.The particle distribution homogeneity in various blends was analyzed.The results showed the distribution homogeneity of each size particles in a blend is closely related to their mass fraction.The higher the mass fraction of the particles,the more homogeneous the distribution of them.The MRESP has no significant influence on the homogeneity of the blend composed of only coarse aggregates.However,the homogeneity of the blend composed of coarse and fine aggregates improves gradually with the increase of the mass fraction of fine aggregates.The smaller the maximum particle size in a blend,the better the homogeneity.It is suggested that the mass fraction of fine aggregates should be between 33%and 50%for achieving good homogeneity of aggregate blends.The research results can provide a reference for gradation design of asphalt mixture.
文摘This study conducts a thorough examination of honeycomb sandwich panels with a lattice core,adopting advanced computational techniques for their modeling.The research extends its analysis to investigate the natural frequency behavior of sandwich panels,encompassing the comprehensive assessment of the entire panel structure.At its core,the research applies the Representative Volume Element(RVE)theory to establish the equivalent material properties,thereby enhancing the predictive capabilities of lattice structure simulations.Themethodology applies these properties in the core of infinite panels,which are modeled using double periodic boundary conditions to explore their natural frequencies.Expanding beyond mere material characterization,the study introduces a novel approach to defining the material within the panel cores.By incorporating alternate materials such as steel and AlSiC,and by strategically modifying their ratios,the research streamlines the process of material variation without resorting to repetitive 3D operations on the constituent cells.This optimizes not only the computational resources but also offers insights into the structural response under diverse material compositions.Furthermore,the investigation extends its scope to analyze the influence of curvature on the structural behavior of lattice structures.Panels are modeled with varying degrees of curvature,ranging from single to double curvatures,including cylindrical and spherical configurations,across a spectrum of radii.A rigorous analysis is performed to study the effect of curvature on the mechanical performance and stability of lattice structures,offering valuable insights for design optimization and structural engineering applications.By building upon the existing knowledge and introducing innovative methodologies,this study contributes to improving the understanding of lattice structures and their applicability in diverse engineering contexts.
基金supported by the China Scholarship Council (Grant No.2018-0861-0211).
文摘A two-scale method is proposed to simulate the essential behavior of bolted connections in structures includingelevated temperatures.It is presented,verified,and validated for the structural behavior of two plates,connectedby a bolt,under a variety of loads and elevated temperatures.The method consists of a global-scale model thatsimulates the structure(here the two plates)by volume finite elements,and in which the bolt is modelled bya spring.The spring properties are provided by a smallscale model,in which the bolt is modelled by volumeelements,and for which the boundary conditions are retrieved from the global-scale model.To ensure the small-scale model to be as computationally efficient as possible,simplifications are discussed regarding the materialmodel and the modelling of the threads.For the latter,this leads to the experimentally validated application ofa non-threaded shank with its stress area.It is shown that a non-linear elastic spring is needed for the bolt inthe global-scale model,so the post-peak behavior of the structure can be described efficiently.All types of boltedconnection failure as given by design standards are simulated by the twoscale method,which is successfullyvalidated(except for net section failure)by experiments,and verified by a detailed system model,which modelsthe structure in full detail.The sensitivity to the size of the part of the plate used in the small-scale modelis also studied.Finally,multi-directional load cases,also for elevated temperatures,are studied with the two-scale method and verified with the detailed system model.As a result,a computationally efficient finite elementmodelling approach is provided for all possible combined load actions(except for nut thread failure and netsection failure)and temperatures.The two-scale method is shown to be insightful,for it contains a functionalseparation of scales,revealing their relationships,and consequently,local small-scale non-convergence can behandled.Not presented in this paper,but the two-scale method can be used in e.g.computationally expensive two-way coupled fire-structure simulations,where it is beneficial for distributed computing and densely packed boltconfigurations with stiffplates,for which a single small-scale model may be representative for several connections.
文摘By the two-scale homogenization approach we justify a two-scale model of ion transport through a layered membrane, with flows being driven by a pressure gradient and an external electrical field. By up-scaling, the electroosmotic flow equations in horizontal thin slits separated by thin solid layers are approximated by a homogenized system of macroscale equations in the form of the Poisson equation for induced vertical electrical field and Onsager's reciprocity relations between global fluxes (hydrodynamic and electric) and forces (horizontal pressure gradient and external electrical field). In addition, the two-scale approach provides macroscopic mobility coefficients in the Onsager relations. On this way, the cross-coupling kinetic coefficient is obtained in a form which does involves the ζ -potential among the data provided the surface current is negligible.
基金Project supported by the National Natural Science Foundation of China(Nos.11932008 and 12272156)the Fundamental Research Funds for the Central Universities(No.lzujbky-2022-kb06)+1 种基金the Gansu Science and Technology ProgramLanzhou City’s Scientific Research Funding Subsidy to Lanzhou University of China。
文摘Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.
基金The project supported by the Special Funds for Major State Basic Research Project (2005CB321704)the National Natural Science Foundation of China (10590353 and 90405016)The English text was polished by Yunming Chen
文摘In this paper, a two-scale method （TSM） is presented for identifying the mechanics parameters such as stiffness and strength of composite materials with small periodic configuration. Firstly, a formulation is briefly given for two-scale analysis （TSA） of the composite materials. And then a two-scale computation formulation of strains and stresses is developed by displacement solution with orthotropic material coefficients for three kinds of such composites structures, i.e., the tension column with a square cross section, the bending cantilever with a rectangular cross section and the torsion column with a circle cross section. The strength formulas for the three kinds of structures are derived and the TSM procedure is discussed. Finally the numerical results of stiffness and strength are presented and compared with experimental data. It shows that the TSM method in this paper is feasible and valid for predicting both the stiffness and the strength of the composite materials with periodic configuration.
基金supported by the National Natural Science Foundation of China(Nos.10801042 and 11171257)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20104410120001)
文摘The prediction of the mechanical and electric properties of piezoelectric fibre composites has become an active research area in recent years. By means of introducing a boundary layer problem, some new kinds of two-scale finite element methods for solutions to the electric potential and the displacement for composite material in periodic struc- ture under the coupled piezoelectricity are derived. The coupled two-scale relation of the electric potential and the displacement is set up, and some finite element approximate estimates and numerical examples which show the effectiveness of the method are presented.
基金National Natural Science Foundation of China (10772115)
文摘In order to study the failure patterns and strength of 3D braided composites from the microscopic view, the damage propagation under tensile loading steps in three kinds of unit cells is simulated. The homogenization formula of micro-stress and the solving approach of finite element method are given firstly. A criterion is presented to determine the damage and its pattern of each element, and then the stiffness degradation method based on Murakami's geometric damage theory is used to simulate the status of damage under tensile loading steps for three kinds of unit cells. It can be seen that the damage percentage and damage pattern of damaged unit cell are totally different for different kind of unit cells. More damaged elements are observed for face cell and corner cell than that for body cell. It is also observed that the damage firstly occurs at the area of face cell, which agrees well with experimental results. It is verified that considering the effects of face and corner cells are important for the damage and strength analysis of 3D braided composites.
文摘With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.
文摘Under inspiration from the structure-preserving property of symplectic difference schemes for Hamiltonian systems, two homogenization conditions for a representative unit cell of the periodical composites are proposed, one condition is the equivalence of strain energy, and the other is the deformation similarity. Based on these two homogenization conditions, an eigenelement method is presented, which is characteristic of structure-preserving property. It follows from the frequency comparisons that the eigenelement method is more accurate than the stiffness average method and the compliance average method.
基金the National Natural Science Foundation of China(No.11501449 and 11471262)the Center for high performance computing of Northwestern Polytechnical University.
文摘In this paper,we discuss the numerical accuracy of asymptotic homogenization method(AHM)and multiscale finite element method(MsFEM)for periodic composite materials.Through numerical calculation of the model problems for four kinds of typical periodic composite materials,the main factors to determine the accuracy of first-order AHM and second-order AHM are found,and the physical interpretation of these factors is given.Furthermore,the way to recover multiscale solutions of first-order AHM and MsFEM is theoretically analyzed,and it is found that first-order AHM and MsFEM provide similar multiscale solutions under some assumptions.Finally,numerical experiments verify that MsFEM is essentially a first-order multiscale method for periodic composite materials.
文摘In this article, the analytical homogenization method of periodic discrete media（HPDM）and the numerical condensed wave finite element method（CWFEM） are employed to study the longitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of frequency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.
基金Funded by National High-Tech Foundation(State 863 Plan)(No.2003AA305920)
文摘The objective of this study is to investigate the local stress fluctuation in two-phase composite by homogenization method. The composite was described by homogeneous macro structure and periodical micro structure sinudtaneously and the mechanical response of the composite can be described based on both macro and micro dimensional scales. Micro and mocro homogenization problems can be formulated. The effective material properties of the composite and the local stress field in the microstructure of the composite can be determined by solving these equntions.
文摘The objective of this study was to determine the overall thermal elastic behavior of composites by homogenization method. The results obtained were compared with those by other well-known methods such as mean field method , self-consistent method and etc. A good agreement is achieved and thus a reliable nwthod for predicting the effective behavior of composite is presented. It is very easy to extend this method to multi-phase composite. The materiol properties determined here include elastic modulus, Poisson ratio and thermal expansion coefficient （CTE）.
基金the support by the Medicine and Engineering Project
文摘In this study,a homogenization method is employed to determine the values of effective elastic modulus for BaZrO3 which is a promising candidate material for electrolyte in solid oxide fuel cell (SOFC).Comparison between the homogenization and the analysis data reveals that the difference becomes significant with increasing of porosity when upper 20%.The empire mechanic behavior in a typical planar fuel cell is evaluated using finite element method (FEM).Large stress gradient occurs in vicinity of the interface of the electrolyte and the cathode due to theirs mismatch of thermal expansion coefficient (TEC).Moreover,local processing results reveal that microscopic stress concentration around pore near the interface of the electrolyte and the cathode in the cell perhaps produces cracks which may lead to the fail of the electrolyte and the lower energy convention efficiency.
基金Project supported by the National Natural Science Foundation of China(No.11471262)
文摘The correspondence principle is an important mathematical technique to compute the non-ageing linear viscoelastic problem as it allows to take advantage of the computational methods originally developed for the elastic case. However, the correspon- dence principle becomes invalid when the materials exhibit ageing. To deal with this problem, a second-order two-scale （SOTS） computational method in the time domain is presented to predict the ageing linear viscoelastic performance of composite materials with a periodic structure. First, in the time domain, the SOTS formulation for calcu- lating the effective relaxation modulus and displacement approximate solutions of the ageing viscoelastic problem is formally derived. Error estimates of the displacement ap- proximate solutions for SOTS method are then given. Numerical results obtained by the SOTS method are shown and compared with those by the finite element method in a very fine mesh. Both the analytical and numerical results show that the SOTS computational method is feasible and efficient to predict the ageing linear viscoelastic performance of composite materials with a periodic structure.
基金Project supported by the National Natural Science Foundation of China(No.10590353)the Science Research Project of National University of Defense Technology(No.JC09-02-05)
文摘The purpose of this paper is to solve nonselfadjoint elliptic problems with rapidly oscillatory coefficients. A two-order and two-scale approximate solution expression for nonselfadjoint elliptic problems is considered, and the error estimation of the twoorder and two-scale approximate solution is derived. The numerical result shows that the presented approximation solution is effective.
基金partially supported by China Postdoctoral Science Foundation(2018M643573)National Natural Science Foundation of Shaanxi Province(2019JQ-048)+2 种基金National Natural Science Foundation of China(51739007,61971328,11301392 and 11961009)of ChinaShanghai Peak Discipline Program for Higher Education Institutions(ClassⅠ)–Civil EngineeringFundamental Research Funds for the Central Universities(No.22120180529)。
文摘In this paper,a stochastic second-order two-scale(SSOTS)method is proposed for predicting the non-deterministic mechanical properties of composites with random interpenetrating phase.Firstly,based on random morphology description functions(RMDF),the randomness of the material properties of the constituents as well as the correlation among these random properties are fully characterized through the topologies of the constituents.Then,by virtue of multiscale asymptotic analysis,the random effective quantities such as stiffness parameters and strength parameters along with their numerical computation formulae are derived by a SSOTS strategy combined with the Monte-Carlo method.Finally,the SSOTS method developed in this paper shows an excellent computational accuracy,and therefore present an important advance towards computationally efficient multiscale modeling frameworks considering microstructure uncertainties.
基金supported by the Special Funds for the National Basic Research Program of China(Grant No.2012CB025904)the National Natural ScienceFoundation of China(Grant Nos.90916027 and 11302052)
文摘This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of the problem by a statistical second-order two-scale （SSOTS） analysis method and the algorithm procedure based on the finite-element difference method are presented. Numerical results of coupled cases are compared with those of uncoupled cases. It shows that the coupling effects on temperature, thermal flux, displacement, and stresses are very distinct, and the micro- characteristics of particles affect the coupling effect of the random composites. Furthermore, the coupling effect causes a lag in the variations of temperature, thermal flux, displacement, and stresses.
基金the National Natural Science Foundation (19602007)National Outstanding Youth Foundation (19525206)
文摘Owing to the existence of distributed holes, it is difficult tosolve the bending problem of perforated plates by the conventionalfinite element method. A homogenization-based method for this problemis presented in this paper. As an example, the bending analysis of acircular perforated plate with distributed step-wise cylindricalholes is made. The deflection and the fundamental frequen- cyobtained by present method are in good agreement with experimentaldata, this implies that the method is effective.
