The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is pro...The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is proposed in this paper. This model uses the quasi-2D model for pure liquid zone and one-dimensional( 1D) discrete vapor cavity model for vaporous cavity zone. The quasi-2D model solves two-dimensional equations for both axial and radial velocities and 1D equations for both pressure head and discharge by the method of characteristics. The 1D discrete vapor cavity model is used to simulate the vaporous cavity occurred when the pressure in the local pipe is lower than the vapor pressure of the liquid. The proposed model is used to simulate two-phase water flows caused by the rapid downstream valve closure in a reservoir-pipe-valve system.The results obtained by the proposed model are compared with those by the corresponding 1D model and the experimental ones provided by the literature,respectively. The comparison shows that the maximum pressure heads simulated by the proposed model are more accurate than those by the corresponding 1D model.展开更多
A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure d...A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure distribution assumption and the Boussinesq approximation. An explicit scheme is employed to solve the continuity equations. The momentum and mass balance equations are solved implicitly in the Cartesian coordinate system. The tributaries are governed by the same dynamic equations. A control volume at the junctions is designed to conserve mass and volume transport in the finite difference schemes, based on the physical principle of continuum medium of fluid. Predictions by the developed model are compared with the analytic solutions of steady wind-driven circulatory flow and tidal flow. The model results for the velocities and water surface elevations coincide with analytic results. The model is then applied to the Tanshui River estuarine system. Detailed model calibration and verification have been conducted with measured water surface elevations, tidal current, and salinity distributions. The overall performance of the model is in qualitative agreement with the available field data. The calibrated and verified numerical model has been used to quantify the tidal prism and flushing rate in the Tanshui River-Tahan Stream, Hsintien Stream, and Keelung River.展开更多
Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model,...Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected by the expansive oxidation reaction induced stress. The dependency of the oxidation upon curvature and temperature is modeled. Good agreement between the model predictions and available experimental data is obtained. The de- veloped model serves to quantify the oxidation in two-dimensional nanostructures and is expected to facilitate their fabrication via thermal oxidation techniques.展开更多
A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation f...A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.展开更多
This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both th...This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.展开更多
In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By us...In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By using different microstructural evolution equations developed by Sellars,Senuma et al.and Easka et al.,the comparison studies have been made,which present that (1) the calculated γ-grain sizes show good agreements with the measured;(2) these equations show consistencies at the end of finishing stands.展开更多
In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heteroge...In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heterogeneities. A large-scale model is derived from a Darcy-scale dissolution model in the case of small and large Damkholer numbers, i.e., for smooth or sharp dissolution fronts. The resulting models in both cases have the mathematical structure of a non-equilibrium dissolution model. It is shown how to calculate the resulting mass exchange and relative permeability terms from the Darcy-scale heterogeneities and other fluid properties. One of the important finding is that the obtained values have a very different behavior compared to the Darcy-scale usual correlations. The large scale correlations are also very different between the two limit cases. The resulting large-scale models are compared favorably to Darcy-scale direct simulations.展开更多
This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This m...This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This model introduces a dependence between the two surplus levels,present in both the associated perturbations and the claims resulting from common shocks.Critical levels of capital injection and dividends are established for each of the two risks.The surplus levels are observed discretely at fixed intervals,guiding decisions on capital injection,dividends,and ruin at these junctures.This study employs a two-dimensional Fourier cosine series expansion method to approximate the finite time expected discounted operating cost until ruin.The ensuing approximation error is also quantified.The validity and accuracy of the method are corroborated through numerical examples.Furthermore,the research delves into the optimal capital allocation problem.展开更多
As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and el...As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.展开更多
Superconductivity in two-dimensional(2D)materials has attracted considerable attention due to their unique physical properties and potential for high-temperature operation.Boron-based 2D compounds are particularly pro...Superconductivity in two-dimensional(2D)materials has attracted considerable attention due to their unique physical properties and potential for high-temperature operation.Boron-based 2D compounds are particularly promising,thanks to their structural flexibility and the emergence of strong electron-phonon coupling(EPC)associated with light elements.While most previous studies have focused on stabilizing boron sheets through metal incorporation,we propose an alternative approach based on multicenter bonding enabled by group-IV non-metallic elements(Si,Ge,Sn).The resulting XB_(2)(X=Si,Ge,Sn)monolayers,which adopt a MgB_(2)-like monolayer configuration,are stabilized by a seven-center two-electron(7c-2e)bonding network between the X atoms and the boron honeycomb lattice.This bonding lowers the energy of the B-p_(z)orbitals and enhances lattice stability.The superconducting transition temperature(T_(c))increases significantly with the atomic number of X—from 4.7 K in SiB_(2)to 13.3 K in GeB_(2)and 24.9 K in SnB_(2)—driven by an increased carrier density near the Fermi level(E_(F))and softening of the high-frequency E_(2)phonon mode.Furthermore,we design a SnB_4 monolayer,in which a Sn layer is sandwiched between the two boron layers.This structure enriches in-plane phonon modes and strengthens EPC,yielding a T_(c)of 38 K,close to the McMillan limit.These findings highlight the critical role of multicenter bonding and targeted phonon engineering in enabling high-T_(c)2D boron-based superconductors.展开更多
Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of a...Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.展开更多
Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subs...Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subsequent impact on urban structure.Considering the varying travel costs associated with electric and fuel vehicles,we analyze the dynamic choices of households concerning house locations and vehicle types in a two-dimensional monocentric city.A spatial equilibrium is developed to model the interactions between urban density,vehicle age and vehicle type.An agent-based microeconomic residential choice model dynamically coupled with a house rent market is developed to analyze household choices of home locations and vehicle energy types,considering vehicle ages and competition for public charging piles.Key findings from our proposed models show that the proportion of electric vehicles(EVs)peaks at over 50%by the end of the first scrappage period,accompanied by more than a 40%increase in commuting distance and time compared to the scenario with only fuel vehicles.Simulation experiments on a theoretical grid indicate that heterogeneity-induced residential segregation can lead to urban sprawl and congestion.Furthermore,households with EVs tend to be located farther from the city center,and an increase in EV ownership contributes to urban expansion.Our study provides insights into how individuals adapt to EV transitions and the resulting impacts on home locations and land use changes.It offers a novel perspective on the dynamic interactions between EV adoption and urban development.展开更多
Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning eve...Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning events due to rip currents in recent years.To address this issue,a comprehensive study was conducted based on developing a depth-averaged 2D hydrodynamic model to simulate rip currents in the Bai Dai-Cam Ranh coast.The HYDIST-2D numerical model was applied to simulate the rip current evolution in space and time for the study area.The results showed that the HYDIST-2D numerical model can accurately predict the location,magnitude,and microstructure of rip currents,including rip current speed,width,and length.The simulation results revealed that the rip current speed is greater during the low tide phase,with an average speed of 0.5 m s^(-1),while during high tide,the rip current speed is lower,around 0.1–0.8 m s^(-1).The width and length of the rip current also vary with the tide phase,with a wider and longer rip current observed during the low tide phase.The results also showed that the rip current speed and microstructure are influenced by the wave features,tide current,and bathymetry of the study area.The present study provides valuable insights into the dynamics of rip currents in the Bai Dai-Cam Ranh coast.The findings can be used to support the management of bathing activities and provide early warnings for potential risks associated with rip currents.展开更多
Systems with quenched disorder possess complex energy landscapes that are challenging to explore under conventional Monte Carlo methods.In this work,we implement an efficient entropy sampling scheme for accurate compu...Systems with quenched disorder possess complex energy landscapes that are challenging to explore under conventional Monte Carlo methods.In this work,we implement an efficient entropy sampling scheme for accurate computation of the entropy function in low-energy regions.The method is applied to the two-dimensional±J random-bond Ising model,where frustration is controlled by the fraction p of ferromagnetic bonds.We investigate the low-temperature paramagnetic–ferromagnetic phase boundary below the multicritical point at T_(N)=0.9530(4),P_(N)=0.89078(8),as well as the zerotemperature ferromagnetic–spin-glass transition.Finite-size scaling analysis reveals that the phase boundary for T<T_(N) exhibits reentrant behavior.By analyzing the evolution of the magnetizationresolved density of states g(E,M)and ground-state spin configurations against increasing frustration,we provide strong evidence that the zero-temperature transition is a mixed-order.Finite-size scaling conducted on the spin-glass side supports the validity of β=0,whereβis the magnetization exponent,with a correlation length exponentν=1.50(8).Our results provide new insights into the nature of the ferromagnetic-to-spin-glass phase transition in an extensively degenerate ground state.展开更多
Interest in understanding the structural behavior of marine floating photovoltaic(FPV)systems has grown significantly over the last decade.Numerical models are the preferred approach for understanding FPV responses un...Interest in understanding the structural behavior of marine floating photovoltaic(FPV)systems has grown significantly over the last decade.Numerical models are the preferred approach for understanding FPV responses under environmental loads,but they require validation.Several methods are commonly used to validate numerical results,such as comparison with analytical,field data,and experimental data.The use of analytical approaches to validate numerical results can sometimes be inaccurate due to the complexity of the problems;nevertheless,field data is commonly restricted and frequently unavailable for numerical model validation.Thus,physical models play a crucial role in validating numerical results.This study focuses on the two-dimensional(2-D)modeling process and sensors development for an FPV system with taut mooring,aiming to investigate wave-structure interaction while considering hydroelastic effects.The model is developed in accordance with the Froude-Cauchy similitude law and is made from composite materials to capture structural stiffness.Structural motions,specifically heave and pitch,are measured using an Inertial Measurement Unit(IMU),while strain gauges measure structural stress and mooring tension.The sensors provide precise measurements for strain and pitch;however,heave,as a result of time-domain integration from acceleration,requires further validation.The motion responses of the model align with reference results.展开更多
The measurement of the pairing gap is crucial for investigating the physical properties of superconductors or superfluids.We propose a strategy to measure the pairing gap through the dynamical excitations.With the ran...The measurement of the pairing gap is crucial for investigating the physical properties of superconductors or superfluids.We propose a strategy to measure the pairing gap through the dynamical excitations.With the random phase approximation(RPA),we study the dynamical excitations of a two-dimensional attractive Fermi-Hubbard model by calculating its dynamical structure factor.Two distinct collective modes emerge:a Goldstone phonon mode at transferred momentum q=[0,0]and a roton mode at q=[p,p].The roton mode exhibits a sharp molecular peak in the low-energy regime.Notably,the area under the roton molecular peak scales with the square of the pairing gap,which holds even in three-dimensional and spin-orbit coupled(SOC)optical lattices.This finding suggests an experimental approach to measure the pairing gap in lattice systems by analyzing the dynamical structure factor at q=[p,p].展开更多
Ceramic matrix composites have broad application prospects in the aerospace field due to their high temperature resistance and oxidation resistance.The effect of temperature and environment atmosphere on the fracture ...Ceramic matrix composites have broad application prospects in the aerospace field due to their high temperature resistance and oxidation resistance.The effect of temperature and environment atmosphere on the fracture toughness and failure mechanisms of two-dimensional plain-woven SiC_(f)/SiC composites was investigated.The results show that they exhibit pseudo-plastic deformation behavior at different temperatures.The fracture toughness is as high as 48 MPa m^(1/2)at room temperature,and gradually decreases with rising temperature.The difference in fracture toughness between argon and air initially increases and then decreases with rising temperature.Furthermore,the high-temperature failure mechanisms of these composites were analyzed through macro and micro analysis.Based on this,a physic-based temperature-dependent fracture toughness model considering matrix toughness,plastic power,fiber pull-out,and residual thermal stress was developed for fiber-reinforced ceramic matrix composites.The model has been well validated by experimental results.An analysis of influencing factors regarding the evolution of fracture toughness was conducted by the proposed model.This work contributes to a better understanding of the mechanical performance evolution and failure mechanisms of ceramic matrix composites under multifield coupling conditions,thereby promoting their applications.展开更多
The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are know...The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are known.Tubular gas heaters are an extension of the term“infrared tubular gas heaters”.The main elements are:a gas burner,a tubular heater inside which gas combustion products with air move,and a mechanical fan(supply or exhaust),which ensures the movement of the coolant inside the tubular part and its removal outside.There are a number of new technical solutions that expand the scope of tubular gas heaters,for example,tubular gas heaters on pellets.Mathematical models of tubular heaters on pellets and solutions to the problems of optimal design of tubular heaters of linear structure are known.Another possible structure of tubular gas heaters is heaters with recirculation of the heating gas-air medium.Optimisation of such pellet heaters has not been performed before,which determined the subject of this paper.The article is devoted to the presentation of the method of optimization of the design solution for tubular heaters taking into account recirculation under the existing constraints.The novelty of the optimization lies in the use of a quasi-two-dimensional mathematical model for the hydraulic circuit of the heater.An evolutionary search algorithm with binary choice functions is used for numerical search of solutions,for which convergence with probability 1 to the optimal solution is shown.The algorithm contains two consecutive functions:the function of so-lution generation and the function of solution selection.The function of solution generation is built largely independently of the content of the problem to be solved,while the function of selection is built in such a way that the resulting binary selection relation is completely determined by the requirement of finding the necessary solution.The resulting binary selection relation includes both the selection components of the available constraints and the basic optimiztion requirement.展开更多
The work considers the problem of gas hydrate dissociation in a porous medium using the two-term Forchheimer law,corresponding to high flow rates of reservoir fluids.Such rates can arise during the decomposition of ga...The work considers the problem of gas hydrate dissociation in a porous medium using the two-term Forchheimer law,corresponding to high flow rates of reservoir fluids.Such rates can arise during the decomposition of gas hydrates,since a large amount of gas is released.Intensive emissions of gases from the earth’s interior are observed on the ocean floor.They are also associated with a large number of subvertical geological structures under the ocean floor,coming to the surface in the formof local ring funnels(pockmarks).Many similar objects have also been found on land.Particular interest in this problemis caused by climate threats associated with the release of greenhouse gases.The movement of gas released fromthe hydrate to the breakthrough channel is similar to the gas inflow to the well(without hydrate),which is usually described by a two-term filtration law.In this work,a mathematical model of gas hydrate dissociation with a nonlinear Forchheimer-type law ofmotion is developed.The systemis split in two blocks by physical processes,taking into account the quadratic correction to the velocity in the filtration law.The first block is responsible for the convective transfer of saturation parameters in the model,water,gas and hydrate saturations are taken into account.The second block corresponds to the equation of dissipative piezoconductivity with a different number of thermodynamic degrees of freedom,taking into account heat and mass transfer in a porous medium.The performed splitting allows using explicit-implicit difference schemes when solving problems and avoiding strong refinement of the step in time and space.For numerical modeling,the support operator method is used,which makes it possible to discretize partial differential equations on irregular grids,which allows taking into account the complex geometry and lithology of the reservoir.A difference scheme based on the support operator method is developed,which,due to the mutually consistent approximation of vector analysis operations(divergence and gradient),allows to take into account the various flux laws between adjacent grid cells,including quadratic corrections to the velocity.Based on the developed numerical algorithms and their program implementations,calculations of gas hydrate dissociation are performed both in a reservoir of simple geometric structure and in a heterogeneous reservoir of complex configuration.The results obtained correspond to the physics of the processes under consideration.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51208160)the Natural Science Foundation of Heilongjiang Province(Grant No.QC2012C056)
文摘The features of a quasi-two-dimensional( quasi-2D) model for simulating two-phase water hammer flows with vaporous cavity in a pipe are investigated. The quasi-2D model with discrete vaporous cavity in the pipe is proposed in this paper. This model uses the quasi-2D model for pure liquid zone and one-dimensional( 1D) discrete vapor cavity model for vaporous cavity zone. The quasi-2D model solves two-dimensional equations for both axial and radial velocities and 1D equations for both pressure head and discharge by the method of characteristics. The 1D discrete vapor cavity model is used to simulate the vaporous cavity occurred when the pressure in the local pipe is lower than the vapor pressure of the liquid. The proposed model is used to simulate two-phase water flows caused by the rapid downstream valve closure in a reservoir-pipe-valve system.The results obtained by the proposed model are compared with those by the corresponding 1D model and the experimental ones provided by the literature,respectively. The comparison shows that the maximum pressure heads simulated by the proposed model are more accurate than those by the corresponding 1D model.
基金theScienceCouncil,Taiwan(GrantNo.NSC92 2211 E 037and92 2211 E 057)
文摘A vertical (laterally averaged) two-dimensional hydrodynamic model is developed for tides, tidal current, and salinity in a branched estuarine system. The governing equations are solved with the hydrostatic pressure distribution assumption and the Boussinesq approximation. An explicit scheme is employed to solve the continuity equations. The momentum and mass balance equations are solved implicitly in the Cartesian coordinate system. The tributaries are governed by the same dynamic equations. A control volume at the junctions is designed to conserve mass and volume transport in the finite difference schemes, based on the physical principle of continuum medium of fluid. Predictions by the developed model are compared with the analytic solutions of steady wind-driven circulatory flow and tidal flow. The model results for the velocities and water surface elevations coincide with analytic results. The model is then applied to the Tanshui River estuarine system. Detailed model calibration and verification have been conducted with measured water surface elevations, tidal current, and salinity distributions. The overall performance of the model is in qualitative agreement with the available field data. The calibrated and verified numerical model has been used to quantify the tidal prism and flushing rate in the Tanshui River-Tahan Stream, Hsintien Stream, and Keelung River.
基金financial support of this work by the National Natural Science Foundation of China(11472149)the Tsinghua University Initiative Scientific Research Program(2014z22074)
文摘Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected by the expansive oxidation reaction induced stress. The dependency of the oxidation upon curvature and temperature is modeled. Good agreement between the model predictions and available experimental data is obtained. The de- veloped model serves to quantify the oxidation in two-dimensional nanostructures and is expected to facilitate their fabrication via thermal oxidation techniques.
基金Supported by the National Natural Science Foundation of China.
文摘A new method is proposed for the determination of the parameters in a two-dimensionalmodel which characterizes the properties of axial and radial mixing and mass transport in afixed-bed adsorber.Parameter estimation for the model is carried out with methane-air-5A molecularsieve in a bed under the condition of step injection of tracer from a point on the main axis of thebed by the curve fitting method in the time domain.
基金supported by National Natural Science Foundation of China (Nos. 60974045 and 60674016)the Research Foundation of Education Bureau of Hunan Province, China (No. 08C090)
文摘This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.
文摘In the present paper,the two-dimensional comprehensive model,which integrates the temperature model developed by the authors using finite difference methods and microstructural evolution model,has been developed.By using different microstructural evolution equations developed by Sellars,Senuma et al.and Easka et al.,the comparison studies have been made,which present that (1) the calculated γ-grain sizes show good agreements with the measured;(2) these equations show consistencies at the end of finishing stands.
文摘In this paper, we are interested by the dissolution of NAPL (Non-Aqueous Phase Liquid) contaminants in heterogeneous soils or aquifers. The volume averaging technique is applied to 2D systems with Darcy-scale heterogeneities. A large-scale model is derived from a Darcy-scale dissolution model in the case of small and large Damkholer numbers, i.e., for smooth or sharp dissolution fronts. The resulting models in both cases have the mathematical structure of a non-equilibrium dissolution model. It is shown how to calculate the resulting mass exchange and relative permeability terms from the Darcy-scale heterogeneities and other fluid properties. One of the important finding is that the obtained values have a very different behavior compared to the Darcy-scale usual correlations. The large scale correlations are also very different between the two limit cases. The resulting large-scale models are compared favorably to Darcy-scale direct simulations.
基金supported by the Shihezi University High-Level Talents Research Startup Project(Project No.RCZK202521)the National Natural Science Foundation of China(Grant Nos.12271066,11871121,12171405)+1 种基金the Chongqing Natural Science Foundation Joint Fund for Innovation and Development Project(Project No.CSTB2024NSCQLZX0085)the Chongqing Normal University Foundation(Grant No.23XLB018).
文摘This paper investigates ruin,capital injection,and dividends for a two-dimensional risk model.The model posits that surplus levels of insurance companies are governed by a perturbed composite Poisson risk model.This model introduces a dependence between the two surplus levels,present in both the associated perturbations and the claims resulting from common shocks.Critical levels of capital injection and dividends are established for each of the two risks.The surplus levels are observed discretely at fixed intervals,guiding decisions on capital injection,dividends,and ruin at these junctures.This study employs a two-dimensional Fourier cosine series expansion method to approximate the finite time expected discounted operating cost until ruin.The ensuing approximation error is also quantified.The validity and accuracy of the method are corroborated through numerical examples.Furthermore,the research delves into the optimal capital allocation problem.
基金supported by the NSFC(12474071)Natural Science Foundation of Shandong Province(ZR2024YQ051,ZR2025QB50)+6 种基金Guangdong Basic and Applied Basic Research Foundation(2025A1515011191)the Shanghai Sailing Program(23YF1402200,23YF1402400)funded by Basic Research Program of Jiangsu(BK20240424)Open Research Fund of State Key Laboratory of Crystal Materials(KF2406)Taishan Scholar Foundation of Shandong Province(tsqn202408006,tsqn202507058)Young Talent of Lifting engineering for Science and Technology in Shandong,China(SDAST2024QTB002)the Qilu Young Scholar Program of Shandong University。
文摘As emerging two-dimensional(2D)materials,carbides and nitrides(MXenes)could be solid solutions or organized structures made up of multi-atomic layers.With remarkable and adjustable electrical,optical,mechanical,and electrochemical characteristics,MXenes have shown great potential in brain-inspired neuromorphic computing electronics,including neuromorphic gas sensors,pressure sensors and photodetectors.This paper provides a forward-looking review of the research progress regarding MXenes in the neuromorphic sensing domain and discussed the critical challenges that need to be resolved.Key bottlenecks such as insufficient long-term stability under environmental exposure,high costs,scalability limitations in large-scale production,and mechanical mismatch in wearable integration hinder their practical deployment.Furthermore,unresolved issues like interfacial compatibility in heterostructures and energy inefficiency in neu-romorphic signal conversion demand urgent attention.The review offers insights into future research directions enhance the fundamental understanding of MXene properties and promote further integration into neuromorphic computing applications through the convergence with various emerging technologies.
基金supported by the National Natural Science Foundation of China(Grant Nos.22372142,12304028,12404027)the Foreign Expert Introduction Program(Grant No.G2023003004L)+6 种基金the Central Guiding Local Science and Technology Development Fund Projects(Grant No.236Z7605G)the Natural Science Foundation of Hebei Province(Grant Nos.B2024203051,A2024203023,A2024203002)the Science and Technology Project of Hebei Education Department(Grant No.JZX2023020)the Innovation Capability Improvement Project of Hebei Province(Grant No.22567605H)the Hebei Province Yan Zhao Huang Jin Tai Talent Program(Postdoctoral Platform,Grant No.B2024003003)the financial support from the Spanish Ministry of Science and Innovation(Grant No.PID2022139230NB-I00)the Department of Education,Universities and Research of the Basque Government and the University of the Basque Country(Grant No.IT1707-22)。
文摘Superconductivity in two-dimensional(2D)materials has attracted considerable attention due to their unique physical properties and potential for high-temperature operation.Boron-based 2D compounds are particularly promising,thanks to their structural flexibility and the emergence of strong electron-phonon coupling(EPC)associated with light elements.While most previous studies have focused on stabilizing boron sheets through metal incorporation,we propose an alternative approach based on multicenter bonding enabled by group-IV non-metallic elements(Si,Ge,Sn).The resulting XB_(2)(X=Si,Ge,Sn)monolayers,which adopt a MgB_(2)-like monolayer configuration,are stabilized by a seven-center two-electron(7c-2e)bonding network between the X atoms and the boron honeycomb lattice.This bonding lowers the energy of the B-p_(z)orbitals and enhances lattice stability.The superconducting transition temperature(T_(c))increases significantly with the atomic number of X—from 4.7 K in SiB_(2)to 13.3 K in GeB_(2)and 24.9 K in SnB_(2)—driven by an increased carrier density near the Fermi level(E_(F))and softening of the high-frequency E_(2)phonon mode.Furthermore,we design a SnB_4 monolayer,in which a Sn layer is sandwiched between the two boron layers.This structure enriches in-plane phonon modes and strengthens EPC,yielding a T_(c)of 38 K,close to the McMillan limit.These findings highlight the critical role of multicenter bonding and targeted phonon engineering in enabling high-T_(c)2D boron-based superconductors.
基金supported by the Fundamental Research Funds for the Central Universities(WUT:2024IVA052 and Grant No.104972025KFYjc0089)。
文摘Two-dimensional(2D)multilayer kagome materials hold significant research value for regulating kagome-related physical properties and exploring quantum effects.However,their development is hindered by the scarcity of available material systems,making the identification of novel 2D multilayer kagome candidates particularly important.In this work,three types of 2D materials with trilayer kagome lattices,namely Sc_(6)S_(5)X_(6)(X=Cl,Br,I),are predicted based on first-principles calculations.These 2D materials feature two kagome lattices composed of Sc atoms and one kagome lattice composed of S atoms.Stability analysis indicates that these materials can exist as free-standing 2D materials.Electronic structure calculations reveal that Sc_(6)S_(5)X_(6)are narrow-bandgap semiconductors(0.76–0.95 e V),with their band structures exhibiting flat bands contributed by Sc-based kagome lattices and Dirac band gaps resulting from symmetry breaking.The sulfur-based kagome lattice in the central layer contributes an independent flat band below the Fermi level.Additionally,Sc_(6)S_(5)X_(6)exhibit high carrier mobility,with hole and electron mobilities reaching up to 10^(3)cm^(2)·V^(-1)·s^(-1),indicating potential applications in low-dimensional electronic devices.This work provides an excellent example for the development of novel multilayer 2D kagome materials.
基金supported by National Natural Science Foundation of China(72288101,72361137002,and 72101018)the Dutch Research Council(NWO Grant 482.22.01).
文摘Vehicle electrification,an important method for reducing carbon emissions from road transport,has been promoted globally.In this study,we analyze how individuals adapt to this transition in transportation and its subsequent impact on urban structure.Considering the varying travel costs associated with electric and fuel vehicles,we analyze the dynamic choices of households concerning house locations and vehicle types in a two-dimensional monocentric city.A spatial equilibrium is developed to model the interactions between urban density,vehicle age and vehicle type.An agent-based microeconomic residential choice model dynamically coupled with a house rent market is developed to analyze household choices of home locations and vehicle energy types,considering vehicle ages and competition for public charging piles.Key findings from our proposed models show that the proportion of electric vehicles(EVs)peaks at over 50%by the end of the first scrappage period,accompanied by more than a 40%increase in commuting distance and time compared to the scenario with only fuel vehicles.Simulation experiments on a theoretical grid indicate that heterogeneity-induced residential segregation can lead to urban sprawl and congestion.Furthermore,households with EVs tend to be located farther from the city center,and an increase in EV ownership contributes to urban expansion.Our study provides insights into how individuals adapt to EV transitions and the resulting impacts on home locations and land use changes.It offers a novel perspective on the dynamic interactions between EV adoption and urban development.
文摘Rip currents are a significant threat to swimmers worldwide,responsible for numerous drowning incidents each year.In Vietnam,Bai Dai Beach in Cam Ranh Bay,Khanh Hoa Province,has experienced an increase in drowning events due to rip currents in recent years.To address this issue,a comprehensive study was conducted based on developing a depth-averaged 2D hydrodynamic model to simulate rip currents in the Bai Dai-Cam Ranh coast.The HYDIST-2D numerical model was applied to simulate the rip current evolution in space and time for the study area.The results showed that the HYDIST-2D numerical model can accurately predict the location,magnitude,and microstructure of rip currents,including rip current speed,width,and length.The simulation results revealed that the rip current speed is greater during the low tide phase,with an average speed of 0.5 m s^(-1),while during high tide,the rip current speed is lower,around 0.1–0.8 m s^(-1).The width and length of the rip current also vary with the tide phase,with a wider and longer rip current observed during the low tide phase.The results also showed that the rip current speed and microstructure are influenced by the wave features,tide current,and bathymetry of the study area.The present study provides valuable insights into the dynamics of rip currents in the Bai Dai-Cam Ranh coast.The findings can be used to support the management of bathing activities and provide early warnings for potential risks associated with rip currents.
基金supported by NKRDPC-2022YFA1402802,NSFC-92165204the Research Grants Council of the HKSAR under Grant Nos.12304020 and 12301723+2 种基金Guangdong Provincial Key Laboratory of Magnetoelectric Physics and Devices under Grant No.2022B1212010008Guangdong Fundamental Research Center for Magnetoelectric Physics under Grant No.2024B0303390001Guangdong Provincial Quantum Science Strategic Initiative under Grant No.GDZX2401010。
文摘Systems with quenched disorder possess complex energy landscapes that are challenging to explore under conventional Monte Carlo methods.In this work,we implement an efficient entropy sampling scheme for accurate computation of the entropy function in low-energy regions.The method is applied to the two-dimensional±J random-bond Ising model,where frustration is controlled by the fraction p of ferromagnetic bonds.We investigate the low-temperature paramagnetic–ferromagnetic phase boundary below the multicritical point at T_(N)=0.9530(4),P_(N)=0.89078(8),as well as the zerotemperature ferromagnetic–spin-glass transition.Finite-size scaling analysis reveals that the phase boundary for T<T_(N) exhibits reentrant behavior.By analyzing the evolution of the magnetizationresolved density of states g(E,M)and ground-state spin configurations against increasing frustration,we provide strong evidence that the zero-temperature transition is a mixed-order.Finite-size scaling conducted on the spin-glass side supports the validity of β=0,whereβis the magnetization exponent,with a correlation length exponentν=1.50(8).Our results provide new insights into the nature of the ferromagnetic-to-spin-glass phase transition in an extensively degenerate ground state.
基金funded by the Center for Higher Education Funding and Assessment(Pusat Pelayanan Pembiayaan dan Asesmen Pendidkan Tinggi)-Ministry of Higher Education,Science,and Technology of Republic Indonesia.
文摘Interest in understanding the structural behavior of marine floating photovoltaic(FPV)systems has grown significantly over the last decade.Numerical models are the preferred approach for understanding FPV responses under environmental loads,but they require validation.Several methods are commonly used to validate numerical results,such as comparison with analytical,field data,and experimental data.The use of analytical approaches to validate numerical results can sometimes be inaccurate due to the complexity of the problems;nevertheless,field data is commonly restricted and frequently unavailable for numerical model validation.Thus,physical models play a crucial role in validating numerical results.This study focuses on the two-dimensional(2-D)modeling process and sensors development for an FPV system with taut mooring,aiming to investigate wave-structure interaction while considering hydroelastic effects.The model is developed in accordance with the Froude-Cauchy similitude law and is made from composite materials to capture structural stiffness.Structural motions,specifically heave and pitch,are measured using an Inertial Measurement Unit(IMU),while strain gauges measure structural stress and mooring tension.The sensors provide precise measurements for strain and pitch;however,heave,as a result of time-domain integration from acceleration,requires further validation.The motion responses of the model align with reference results.
基金supported by the National Natural Science Foundation of China[Grant Nos.U23A2073(P.Z.)and 11547034(H.Z.)].
文摘The measurement of the pairing gap is crucial for investigating the physical properties of superconductors or superfluids.We propose a strategy to measure the pairing gap through the dynamical excitations.With the random phase approximation(RPA),we study the dynamical excitations of a two-dimensional attractive Fermi-Hubbard model by calculating its dynamical structure factor.Two distinct collective modes emerge:a Goldstone phonon mode at transferred momentum q=[0,0]and a roton mode at q=[p,p].The roton mode exhibits a sharp molecular peak in the low-energy regime.Notably,the area under the roton molecular peak scales with the square of the pairing gap,which holds even in three-dimensional and spin-orbit coupled(SOC)optical lattices.This finding suggests an experimental approach to measure the pairing gap in lattice systems by analyzing the dynamical structure factor at q=[p,p].
基金supported by the National Natural Science Foundation of China(Grant Nos.12102354,12472214 and 12002288)the Young Elite Scientists Sponsorship Program by CAST(Grant No.2022QNRC001)+2 种基金the Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2023A1515012620 and 2024A1515012018)the independent research project of the National Key Laboratory of Strength and Structural Integrity(Grant No.LSSIZZYJ202305)the Basic Research Program of Taicang(Grant No.TC2022JC09).
文摘Ceramic matrix composites have broad application prospects in the aerospace field due to their high temperature resistance and oxidation resistance.The effect of temperature and environment atmosphere on the fracture toughness and failure mechanisms of two-dimensional plain-woven SiC_(f)/SiC composites was investigated.The results show that they exhibit pseudo-plastic deformation behavior at different temperatures.The fracture toughness is as high as 48 MPa m^(1/2)at room temperature,and gradually decreases with rising temperature.The difference in fracture toughness between argon and air initially increases and then decreases with rising temperature.Furthermore,the high-temperature failure mechanisms of these composites were analyzed through macro and micro analysis.Based on this,a physic-based temperature-dependent fracture toughness model considering matrix toughness,plastic power,fiber pull-out,and residual thermal stress was developed for fiber-reinforced ceramic matrix composites.The model has been well validated by experimental results.An analysis of influencing factors regarding the evolution of fracture toughness was conducted by the proposed model.This work contributes to a better understanding of the mechanical performance evolution and failure mechanisms of ceramic matrix composites under multifield coupling conditions,thereby promoting their applications.
文摘The article is devoted to decision-making in the control and design of autonomous heat supply systems with tubular gas heaters.The results of mathematical modelling and optimization of tubular gas heaters(TGN)are known.Tubular gas heaters are an extension of the term“infrared tubular gas heaters”.The main elements are:a gas burner,a tubular heater inside which gas combustion products with air move,and a mechanical fan(supply or exhaust),which ensures the movement of the coolant inside the tubular part and its removal outside.There are a number of new technical solutions that expand the scope of tubular gas heaters,for example,tubular gas heaters on pellets.Mathematical models of tubular heaters on pellets and solutions to the problems of optimal design of tubular heaters of linear structure are known.Another possible structure of tubular gas heaters is heaters with recirculation of the heating gas-air medium.Optimisation of such pellet heaters has not been performed before,which determined the subject of this paper.The article is devoted to the presentation of the method of optimization of the design solution for tubular heaters taking into account recirculation under the existing constraints.The novelty of the optimization lies in the use of a quasi-two-dimensional mathematical model for the hydraulic circuit of the heater.An evolutionary search algorithm with binary choice functions is used for numerical search of solutions,for which convergence with probability 1 to the optimal solution is shown.The algorithm contains two consecutive functions:the function of so-lution generation and the function of solution selection.The function of solution generation is built largely independently of the content of the problem to be solved,while the function of selection is built in such a way that the resulting binary selection relation is completely determined by the requirement of finding the necessary solution.The resulting binary selection relation includes both the selection components of the available constraints and the basic optimiztion requirement.
基金the framework of the state assignment of Keldysh Institute of Applied Mathematics of RAS(Project No.125020701776-0)the Ministry of Education and Science of Russia for IO RAS(Project No.FMWE-2024-0018).
文摘The work considers the problem of gas hydrate dissociation in a porous medium using the two-term Forchheimer law,corresponding to high flow rates of reservoir fluids.Such rates can arise during the decomposition of gas hydrates,since a large amount of gas is released.Intensive emissions of gases from the earth’s interior are observed on the ocean floor.They are also associated with a large number of subvertical geological structures under the ocean floor,coming to the surface in the formof local ring funnels(pockmarks).Many similar objects have also been found on land.Particular interest in this problemis caused by climate threats associated with the release of greenhouse gases.The movement of gas released fromthe hydrate to the breakthrough channel is similar to the gas inflow to the well(without hydrate),which is usually described by a two-term filtration law.In this work,a mathematical model of gas hydrate dissociation with a nonlinear Forchheimer-type law ofmotion is developed.The systemis split in two blocks by physical processes,taking into account the quadratic correction to the velocity in the filtration law.The first block is responsible for the convective transfer of saturation parameters in the model,water,gas and hydrate saturations are taken into account.The second block corresponds to the equation of dissipative piezoconductivity with a different number of thermodynamic degrees of freedom,taking into account heat and mass transfer in a porous medium.The performed splitting allows using explicit-implicit difference schemes when solving problems and avoiding strong refinement of the step in time and space.For numerical modeling,the support operator method is used,which makes it possible to discretize partial differential equations on irregular grids,which allows taking into account the complex geometry and lithology of the reservoir.A difference scheme based on the support operator method is developed,which,due to the mutually consistent approximation of vector analysis operations(divergence and gradient),allows to take into account the various flux laws between adjacent grid cells,including quadratic corrections to the velocity.Based on the developed numerical algorithms and their program implementations,calculations of gas hydrate dissociation are performed both in a reservoir of simple geometric structure and in a heterogeneous reservoir of complex configuration.The results obtained correspond to the physics of the processes under consideration.
