AIGaN/GaN HEMTs are investigated by numerical simulation from the self-consistent solution of Schr6dinger-Poisson-hydrodynamic （HD） systems. The influences of polarization charge and quantum effects are considered i...AIGaN/GaN HEMTs are investigated by numerical simulation from the self-consistent solution of Schr6dinger-Poisson-hydrodynamic （HD） systems. The influences of polarization charge and quantum effects are considered in this model. Then the two-dimensional conduction band and electron distribution, electron temperature characteristics, Id versus Vd and Id versus Vg, transfer characteristics and transconductance curves are obtained. Corresponding analysis and discussion based on the simulation results are subsequently given.展开更多
When stacking two-dimensional(2D)materials with a lattice mismatch and/or a small twist,moirésuperlattice emerges with fascinating electronic and optical properties.The fabrication of such stacked 2D materials us...When stacking two-dimensional(2D)materials with a lattice mismatch and/or a small twist,moirésuperlattice emerges with fascinating electronic and optical properties.The fabrication of such stacked 2D materials usually requires multiple transfer and stack processes,assisted by a certain transfer medium which needs to be removed afterwards,and it is very challenging to maintain pristine and clean surfaces/interfaces for these stacked structures.In this work,we report a facile direct bonding method for fabrication of twisted MoS_(2) bilayers with ultra-clean surfaces/interfaces.Novel interlayer interactions are revealed in the as-fabricated high-quality samples,leading to twist-angle related dispersion behavior of various Raman modes,such as layer breathing modes,shear modes and E_(2g)modes,as well as indirect bandgap excitons.Field-effect transistors(FETs)of twisted MoS_(2) bilayers also exhibit angle-dependent performance,which could be attributed to the band structure evolution.This facile method holds significance for the future integration of pre-designed multilayer 2D materials and paves a way to explore underlying physical mechanisms and potential applications.展开更多
To ensure the safe operation of batteries,accurately obtaining key internal state parameters is essential.However,traditional parameter measurement methods either require opening the battery or long-term measurements,...To ensure the safe operation of batteries,accurately obtaining key internal state parameters is essential.However,traditional parameter measurement methods either require opening the battery or long-term measurements,which are impractical.Therefore,the fixed values are commonly used for these parameters in electrochemical models and have significant limitations.To overcome these limitations,this paper proposes a deep neural network(DNN)based data-driven evaluation method to determine model parameters.By coupling an improved one-dimensional isothermal pseudo-twodimensional(P2D)model with DNN,this study identified concentration-dependent parameters through detailed discharge curve analysis.The results show that the data-driven method can effectively obtain the change trend of concentration-dependent parameters through the charge and discharge curve,and the method can be extended to different battery systems in different discharge rates and aging applications.This work is expected to provide new parameter selection insights for data-driven battery prediction and monitoring models.展开更多
In this article,a high-order scheme,which is formulated by combining the quadratic finite element method in space with a second-order time discrete scheme,is developed for looking for the numerical solution of a two-d...In this article,a high-order scheme,which is formulated by combining the quadratic finite element method in space with a second-order time discrete scheme,is developed for looking for the numerical solution of a two-dimensional nonlinear time fractional thermal diffusion model.The time Caputo fractional derivative is approximated by using the L2-1formula,the first-order derivative and nonlinear term are discretized by some second-order approximation formulas,and the quadratic finite element is used to approximate the spatial direction.The error accuracy O(h3+t2)is obtained,which is verified by the numerical results.展开更多
This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both th...This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.展开更多
Furrow irrigation with film-mulched agricultural beds is being promoted in the arid region of northwest China because it improves water utilization. Two-dimensional infiltration patterns under film-mulched furrows can...Furrow irrigation with film-mulched agricultural beds is being promoted in the arid region of northwest China because it improves water utilization. Two-dimensional infiltration patterns under film-mulched furrows can provide guidelines and criteria for irrigation design and operation. Our objective was to investigate soil water dynamics during ponding irrigation infiltration of mulched furrows in a cross-sectional ridge-furrow configuration, using laboratory experiments and mathematical simulations. Six experimental treatments, with two soil types （silt loam and sandy loam）, were investigated to monitor the wetting patterns and soil water distribution in a cuboid soil chamber. Irrigation of mulched furrows clearly increased water lateral infiltration on ridge shoulders and ridges, due to enhancement of capillary driving force. Increases to both initial soil water content （SWC） and irrigation water level resulted in increased wetted soil volume. Empirical regression equations accurately estimated the wetted lateral distance （Rl） and downward distance （Rd） with elapsed time in a variably wetted soil medium. Optimization of model parameters followed by the Inverse approach resulted in satisfactory agreement between observed and predicted cumulative infiltration and SWC. On the basis of model calibration, HYDRUS-2D model can accurately simulate two-dimensional soil water dynamics under irrigation of mulched furrows. There were significant differences in wetting patterns between unmulched and mulched furrow irrigation using HYDRUS-2D simulation. The Rd under the mulched furrows was 32.14% less than the unmulched furrows. Therefore, film-mulched furrows are recommended in a furrow irrigation system.展开更多
Within the(2+1)-dimensional Korteweg–de Vries equation framework,new bilinear B¨acklund transformation and Lax pair are presented based on the binary Bell polynomials and gauge transformation.By introducing an a...Within the(2+1)-dimensional Korteweg–de Vries equation framework,new bilinear B¨acklund transformation and Lax pair are presented based on the binary Bell polynomials and gauge transformation.By introducing an arbitrary functionφ(y),a family of deformed soliton and deformed breather solutions are presented with the improved Hirota’s bilinear method.By choosing the appropriate parameters,their interesting dynamic behaviors are shown in three-dimensional plots.Furthermore,novel rational solutions are generated by taking the limit of the obtained solitons.Additionally,twodimensional(2D)rogue waves(localized in both space and time)on the soliton plane are presented,we refer to them as deformed 2D rogue waves.The obtained deformed 2D rogue waves can be viewed as a 2D analog of the Peregrine soliton on soliton plane,and its evolution process is analyzed in detail.The deformed 2D rogue wave solutions are constructed successfully,which are closely related to the arbitrary functionφ(y).This new idea is also applicable to other nonlinear systems.展开更多
Magnetic order in two-dimensional systems was not supposed to exist at finite temperature.In recent years,the successful preparation of two-dimensional ferromagnetic materials such as CrI_(3),Cr_(2) Ge_(2) Te_(6),and ...Magnetic order in two-dimensional systems was not supposed to exist at finite temperature.In recent years,the successful preparation of two-dimensional ferromagnetic materials such as CrI_(3),Cr_(2) Ge_(2) Te_(6),and Fe_(3)GeTe_(2) opens up a new chapter in the remarkable field of two-dimensional materials.Here,we report on a theoretical analysis of the stability of ferromagnetism in Fe_(3)GeTe_(2).We uncover the mechanism of holding long-range magnetic order and propose a model to estimate the Curie temperature of Fe_(3)GeTe_(2).Our results reveal the essential role of magnetic anisotropy in maintaining the magnetic order of two-dimensional systems.The theoretical method used here can be generalized to future research of other magnetic two-dimensional systems.展开更多
The fascinating Dirac cone in honeycomb graphene,which underlies many unique electronic properties,has inspired the vast endeavors on pursuing new two-dimensional(2D)Dirac materials.Based on the density functional the...The fascinating Dirac cone in honeycomb graphene,which underlies many unique electronic properties,has inspired the vast endeavors on pursuing new two-dimensional(2D)Dirac materials.Based on the density functional theory method,a 2D material Zn3Si2 of honeycomb transition-metal silicide with intrinsic Dirac cones has been predicted.The Zn3Si2 monolayer is dynamically and thermodynamically stable under ambient conditions.Importantly,the Zn3Si2 monolayer is a room-temperature 2D Dirac material with a spin-orbit coupling energy gap of 1.2 meV,which has an intrinsic Dirac cone arising from the special hexagonal lattice structure.Hole doping leads to the spin polarization of the electron,which results in a Dirac half-metal feature with single-spin Dirac fermion.This novel stable 2D transition-metal-silicon-framework material holds promises for electronic device applications in spintronics.展开更多
Layered magnetic materials,such as MnBi_(2)Te_(4),have drawn much attention owing to their potential for realizing twodimensional(2D)magnetism and possible topological states.Recently,FeBi_(2)Te_(4),which is isostruct...Layered magnetic materials,such as MnBi_(2)Te_(4),have drawn much attention owing to their potential for realizing twodimensional(2D)magnetism and possible topological states.Recently,FeBi_(2)Te_(4),which is isostructural to MnBi_(2)Te_(4),has been synthesized in experiments,but its detailed magnetic ordering and band topology have not been clearly understood yet.Here,based on first-principles calculations,we investigate the magnetic and electronic properties of FeBi_(2)Te_(4)in bulk and 2D forms.We show that different from MnBi_(2)Te_(4),the magnetic ground states of bulk,single-layer,and bilayer FeBi_(2)Te_(4)all favor a 120°noncollinear antiferromagnetic ordering,and they are topologically trivial narrow-gap semiconductors.For the bilayer case,we find that a quantum anomalous Hall effect with a unit Chern number is realized in the ferromagnetic state,which may be achieved in experiment by an external magnetic field or by magnetic proximity coupling.Our work clarifies the physical properties of the new material system of FeBi_(2)Te_(4)and reveals it as a potential platform for studying magnetic frustration down to 2D limit as well as quantum anomalous Hall effect.展开更多
Traditional two-dimensional（2D） complex resistivity forward modeling is based on Poisson＇s equation but spectral induced polarization（SIP） data are the coproducts of the induced polarization（IP） and the electro...Traditional two-dimensional（2D） complex resistivity forward modeling is based on Poisson＇s equation but spectral induced polarization（SIP） data are the coproducts of the induced polarization（IP） and the electromagnetic induction（EMI） effects.This is especially true under high frequencies,where the EMI effect can exceed the IP effect.2D inversion that only considers the IP effect reduces the reliability of the inversion data.In this paper,we derive differential equations using Maxwell＇s equations.With the introduction of the Cole-Cole model,we use the finite-element method to conduct2 D SIP forward modeling that considers the EMI and IP effects simultaneously.The data-space Occam method,in which different constraints to the model smoothness and parametric boundaries are introduced,is then used to simultaneously obtain the four parameters of the Cole-Cole model using multi-array electric field data.This approach not only improves the stability of the inversion but also significantly reduces the solution ambiguity.To improve the computational efficiency,message passing interface programming was used to accelerate the 2D SIP forward modeling and inversion.Synthetic datasets were tested using both serial and parallel algorithms,and the tests suggest that the proposed parallel algorithm is robust and efficient.展开更多
A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction be...A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction between the nanoplates and the elastic medium. The exact solutions of the nonlocal vibration frequency and buckling critical load of the 2 D decagonal QC layered nanoplates are obtained by solving the eigensystem and using the propagator matrix method. The present three-dimensional(3 D) exact solution can predict correctly the nature frequencies and critical loads of the nanoplates as compared with previous thin-plate and medium-thick-plate theories.Numerical examples are provided to display the effects of the quasiperiodic direction,length-to-width ratio, thickness of the nanoplates, nonlocal parameter, stacking sequence,and medium elasticity on the vibration frequency and critical buckling load of the 2 D decagonal QC nanoplates. The results show that the effects of the quasiperiodic direction on the vibration frequency and critical buckling load depend on the length-to-width ratio of the nanoplates. The thickness of the nanoplate and the elasticity of the surrounding medium can be adjusted for optimal frequency and critical buckling load of the nanoplate.This feature is useful since the frequency and critical buckling load of the 2 D decagonal QCs as coating materials of plate structures can now be tuned as one desire.展开更多
To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering ...To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering method is a kind of unsupervised machine learning method,the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale.With this modification,the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory.To validate the modified multiscale analysis method,progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models.The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first.Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading.The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models.Thereafter,tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results.From the simulation results,it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model.Besides,under tensile loading,the damage all initiates from the fill tows and propagates to the wrap tows.However,under compressive loading,the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model.展开更多
One of the largest known megafloods on earth resulted from a glacier dam-break,which occurred during the Late Quaternary in the Altai Mountains in Southern Siberia.Computational modeling is one of the viable approache...One of the largest known megafloods on earth resulted from a glacier dam-break,which occurred during the Late Quaternary in the Altai Mountains in Southern Siberia.Computational modeling is one of the viable approaches to enhancing the understanding of the flood events.The computational domain of this flood is over 9460 km2 and about 3.784 × 106 cells are involved as a 50 m × 50 m mesh is used,which necessitates a computationally efficient model.Here the Open MP(Open Multiprocessing) technique is adopted to parallelize the code of a coupled 2D hydrodynamic and sediment transport model.It is shown that the computational efficiency is enhanced by over 80% due to the parallelization.The floods over both fixed and mobile beds are well reproduced with specified discharge hydrographs at the dam site.Qualitatively,backwater effects during the flood are resolved at the bifurcation between the Chuja and Katun rivers.Quantitatively,the computed maximum stage and thalweg are physically consistent with the field data of the bars and deposits.The effects of sediment transport and morphological evolution on the flood are considerable.Sensitivity analyses indicate that the impact of the peak discharge is significant,whilst those of the Manningroughness,medium sediment size and shape of the inlet discharge hydrograph are marginal.展开更多
The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlaye...The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlayer,sedimentary rhythm and 3D heterogeneity,on the mobility control capability and oil displacement efficiency of foam flooding,were systematically investigated using 2D homogeneous and 2D/3D heterogeneous models under 120°C and salinity of 20×10~4 mg/L.The flow resistance of foam was promoted as the permeability increased,which thus resulted in a considerable oil recovery behavior.In the scenario of the vertical heterogeneous formations,it was observed that the permeability of the high-permeable layer was crucial to foam mobility control,and the positive rhythm appeared favorable to improve the foam flooding performance.The additional oil recovery increased to about 40%.The interlayer was favorable for the increases in mobility reduction factor and oil recovery of foam flooding when the low permeability ratio was involved.For the 3D heterogeneous formations,foam could efficiently adjust the areal and vertical heterogeneity through mobility control and gravity segregation,and thus enhancing the oil recovery to 11%–14%.The results derived from this work may provide some insight for the field test designs of foam flooding.展开更多
With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and po...With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and poor encryption efficiency.To enhance performance,this paper proposes a new encryption algorithm designed to optimize parallel processing and adapt to images of varying sizes and colors.The method begins by using SHA-384 to extract the hash value of the plaintext image,which is then processed to determine the chaotic system’s initial value and block size.The image is padded and divided into blocks for further processing.A novel two-dimensional infinite collapses hyperchaotic map(2DICHM)is employed to generate the intra-block scrambling sequence,while an improved variable Joseph traversal sequence is used for inter-block scrambling.After removing the padding,3D forward and backward shift diffusions,controlled by the 2D-ICHM sequences,are applied to the scrambled image,producing the ciphertext.Simulation results demonstrate that the proposed algorithm outperforms others in terms of entropy,anti-noise resilience,correlation coefficient,robustness,and encryption efficiency.展开更多
Field-effect transistors （FETs） for logic applications, graphene and MoS2, are discussed. These materials have based on two representative two-dimensional （2D） materials, drastically different properties and requi...Field-effect transistors （FETs） for logic applications, graphene and MoS2, are discussed. These materials have based on two representative two-dimensional （2D） materials, drastically different properties and require different consider- ations. The unique band structure of graphene necessitates engineering of the Dirac point, including the opening of the bandgap, the doping and the interface, before the graphene can be used in logic applications. On the other hand, MoS2 is a semiconductor, and its electron transport depends heavily on the surface properties, the number of layers, and the carrier density. Finally, we discuss the prospects for the future developments in 2D material transistors.展开更多
Research on two-dimensional(2D)materials is one of the most active fields in materials science and nanotechnology.Among the members of the 2D family,layered hydroxides(LHs)represent an exceptional case of study due to...Research on two-dimensional(2D)materials is one of the most active fields in materials science and nanotechnology.Among the members of the 2D family,layered hydroxides(LHs)represent an exceptional case of study due to their unparalleled chemical versatility which allows the modulation of their physicochemical properties at will.Nowadays,LHs based on earth-abundant metals are key materials in the areas of energy storage and conversion,hybrid materials or magnetism.α-Co hydroxides(Simonkolleite-like structures)are promising phases with tuneable electronic and magnetic properties by ligand modification.However,even in the simple case ofα-Co^(Ⅱ)hydroxychlorides,the preparation of well-defined large 2D crystals is not straightforward,hindering the development of fundamental studies.Herein,we present the synthesis of 2D hexagonal crystals with outstanding sizethickness relationship(diameter>5μm and thickness of 20±7 nm)by a simple homogeneous synthesis taking place at room temperature.In structural terms,no differences are observed between our layered materials and those obtained hydrothermally.However,dynamic susceptibility measurements alert about different arrangements of the magnetic sublattices,which have been rationalized with structural DFT calculations.This work provides an extremely easy bottom-up method to obtain high-quality 2D crystals based onα-CoIIhydroxides,paving the way for the development of fundamental studies and applications.展开更多
We review experimental and theoretical results on thermal transport in semiconductor nanostructures（multilayer thin films, core/shell and segmented nanowires）, single-and few-layer graphene, hexagonal boron nitride,...We review experimental and theoretical results on thermal transport in semiconductor nanostructures（multilayer thin films, core/shell and segmented nanowires）, single-and few-layer graphene, hexagonal boron nitride, molybdenum disulfide, and black phosphorus. Different possibilities of phonon engineering for optimization of electrical and heat conductions are discussed. The role of the phonon energy spectra modification on the thermal conductivity in semiconductor nanostructures is revealed. The dependence of thermal conductivity in graphene and related two-dimensional（2 D） materials on temperature, flake size, defect concentration, edge roughness, and strain is analyzed.展开更多
文摘AIGaN/GaN HEMTs are investigated by numerical simulation from the self-consistent solution of Schr6dinger-Poisson-hydrodynamic （HD） systems. The influences of polarization charge and quantum effects are considered in this model. Then the two-dimensional conduction band and electron distribution, electron temperature characteristics, Id versus Vd and Id versus Vg, transfer characteristics and transconductance curves are obtained. Corresponding analysis and discussion based on the simulation results are subsequently given.
基金supported by Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030002)the National Key Research and Development Program(Grant No.2021YFA1202900)the National Natural Science Foundation of China(Grant Nos.62204166 and 62404145)。
文摘When stacking two-dimensional(2D)materials with a lattice mismatch and/or a small twist,moirésuperlattice emerges with fascinating electronic and optical properties.The fabrication of such stacked 2D materials usually requires multiple transfer and stack processes,assisted by a certain transfer medium which needs to be removed afterwards,and it is very challenging to maintain pristine and clean surfaces/interfaces for these stacked structures.In this work,we report a facile direct bonding method for fabrication of twisted MoS_(2) bilayers with ultra-clean surfaces/interfaces.Novel interlayer interactions are revealed in the as-fabricated high-quality samples,leading to twist-angle related dispersion behavior of various Raman modes,such as layer breathing modes,shear modes and E_(2g)modes,as well as indirect bandgap excitons.Field-effect transistors(FETs)of twisted MoS_(2) bilayers also exhibit angle-dependent performance,which could be attributed to the band structure evolution.This facile method holds significance for the future integration of pre-designed multilayer 2D materials and paves a way to explore underlying physical mechanisms and potential applications.
基金supported by National Natural Science Foundation of China(22478239)Science and Technology Commission of Shanghai Municipality(19DZ2271100)National Natural Science Foundation of China(22208208)。
文摘To ensure the safe operation of batteries,accurately obtaining key internal state parameters is essential.However,traditional parameter measurement methods either require opening the battery or long-term measurements,which are impractical.Therefore,the fixed values are commonly used for these parameters in electrochemical models and have significant limitations.To overcome these limitations,this paper proposes a deep neural network(DNN)based data-driven evaluation method to determine model parameters.By coupling an improved one-dimensional isothermal pseudo-twodimensional(P2D)model with DNN,this study identified concentration-dependent parameters through detailed discharge curve analysis.The results show that the data-driven method can effectively obtain the change trend of concentration-dependent parameters through the charge and discharge curve,and the method can be extended to different battery systems in different discharge rates and aging applications.This work is expected to provide new parameter selection insights for data-driven battery prediction and monitoring models.
基金the National Natural Science Fund(11661058,11761053)Natural Science Fund of Inner Mongolia Autonomous Region(2016MS0102,2017MS0107)+1 种基金Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT-17-A07)National Undergraduate Innovative Training Project of Inner Mongolia University(201710126026).
文摘In this article,a high-order scheme,which is formulated by combining the quadratic finite element method in space with a second-order time discrete scheme,is developed for looking for the numerical solution of a two-dimensional nonlinear time fractional thermal diffusion model.The time Caputo fractional derivative is approximated by using the L2-1formula,the first-order derivative and nonlinear term are discretized by some second-order approximation formulas,and the quadratic finite element is used to approximate the spatial direction.The error accuracy O(h3+t2)is obtained,which is verified by the numerical results.
基金supported by National Natural Science Foundation of China (Nos. 60974045 and 60674016)the Research Foundation of Education Bureau of Hunan Province, China (No. 08C090)
文摘This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.
基金supported by National Natural Science Foundation of China (NO. 41401036)China Postdoctoral Science Foundation (NO. 2015T81070, 2014M560818)West Light Foundation of the Chinese Academy of Sciences
文摘Furrow irrigation with film-mulched agricultural beds is being promoted in the arid region of northwest China because it improves water utilization. Two-dimensional infiltration patterns under film-mulched furrows can provide guidelines and criteria for irrigation design and operation. Our objective was to investigate soil water dynamics during ponding irrigation infiltration of mulched furrows in a cross-sectional ridge-furrow configuration, using laboratory experiments and mathematical simulations. Six experimental treatments, with two soil types （silt loam and sandy loam）, were investigated to monitor the wetting patterns and soil water distribution in a cuboid soil chamber. Irrigation of mulched furrows clearly increased water lateral infiltration on ridge shoulders and ridges, due to enhancement of capillary driving force. Increases to both initial soil water content （SWC） and irrigation water level resulted in increased wetted soil volume. Empirical regression equations accurately estimated the wetted lateral distance （Rl） and downward distance （Rd） with elapsed time in a variably wetted soil medium. Optimization of model parameters followed by the Inverse approach resulted in satisfactory agreement between observed and predicted cumulative infiltration and SWC. On the basis of model calibration, HYDRUS-2D model can accurately simulate two-dimensional soil water dynamics under irrigation of mulched furrows. There were significant differences in wetting patterns between unmulched and mulched furrow irrigation using HYDRUS-2D simulation. The Rd under the mulched furrows was 32.14% less than the unmulched furrows. Therefore, film-mulched furrows are recommended in a furrow irrigation system.
基金Project supported by the National Natural Scinece Foundation of China(Grant Nos.11671219,11871446,12071304,and 12071451).
文摘Within the(2+1)-dimensional Korteweg–de Vries equation framework,new bilinear B¨acklund transformation and Lax pair are presented based on the binary Bell polynomials and gauge transformation.By introducing an arbitrary functionφ(y),a family of deformed soliton and deformed breather solutions are presented with the improved Hirota’s bilinear method.By choosing the appropriate parameters,their interesting dynamic behaviors are shown in three-dimensional plots.Furthermore,novel rational solutions are generated by taking the limit of the obtained solitons.Additionally,twodimensional(2D)rogue waves(localized in both space and time)on the soliton plane are presented,we refer to them as deformed 2D rogue waves.The obtained deformed 2D rogue waves can be viewed as a 2D analog of the Peregrine soliton on soliton plane,and its evolution process is analyzed in detail.The deformed 2D rogue wave solutions are constructed successfully,which are closely related to the arbitrary functionφ(y).This new idea is also applicable to other nonlinear systems.
基金Project supported by the Fundamental Research Funds for the Central Universities,China(Grant No.XJS200503)the Post-Doctoral Research Project of Shaanxi Province,China。
文摘Magnetic order in two-dimensional systems was not supposed to exist at finite temperature.In recent years,the successful preparation of two-dimensional ferromagnetic materials such as CrI_(3),Cr_(2) Ge_(2) Te_(6),and Fe_(3)GeTe_(2) opens up a new chapter in the remarkable field of two-dimensional materials.Here,we report on a theoretical analysis of the stability of ferromagnetism in Fe_(3)GeTe_(2).We uncover the mechanism of holding long-range magnetic order and propose a model to estimate the Curie temperature of Fe_(3)GeTe_(2).Our results reveal the essential role of magnetic anisotropy in maintaining the magnetic order of two-dimensional systems.The theoretical method used here can be generalized to future research of other magnetic two-dimensional systems.
基金the National Natural Science Foundation of China(Grant Nos.11674136 and 11564022)Yunnan Province for Recruiting High-Caliber Technological Talents,China(Grant No.1097816002)+3 种基金Reserve Talents for Yunnan Young and Middle-aged Academic and Technical Leaders,China(Grant No.2017HB010)the Academic Qinglan Project of KUST(Grant No.1407840010)the Analysis and Testing Fund of KUST(Grant No.2017M20162230010)the High-level Talents of KUST(Grant No.1411909425)。
文摘The fascinating Dirac cone in honeycomb graphene,which underlies many unique electronic properties,has inspired the vast endeavors on pursuing new two-dimensional(2D)Dirac materials.Based on the density functional theory method,a 2D material Zn3Si2 of honeycomb transition-metal silicide with intrinsic Dirac cones has been predicted.The Zn3Si2 monolayer is dynamically and thermodynamically stable under ambient conditions.Importantly,the Zn3Si2 monolayer is a room-temperature 2D Dirac material with a spin-orbit coupling energy gap of 1.2 meV,which has an intrinsic Dirac cone arising from the special hexagonal lattice structure.Hole doping leads to the spin polarization of the electron,which results in a Dirac half-metal feature with single-spin Dirac fermion.This novel stable 2D transition-metal-silicon-framework material holds promises for electronic device applications in spintronics.
基金funding support from the Singapore MOE Ac RF 308 Tier 2(Grant No.T2EP50220-0026)funding support from Shandong Provincial Natural Science Foundation(Grant No.ZR2023QA012)+3 种基金the Special Fund-ing in the Project of Qilu Young Scholar Program of Shandong Universityfunding support from Australian Research Council Future Fellowship(Grant No.FT220100290)funding support from the AINSE postgraduate awardfunding support from the Research and Development Administration Office at the University of Macao(Grants Nos.MYRG2022-00088-IAPME and SRG2021-00003-IAPME)。
文摘Layered magnetic materials,such as MnBi_(2)Te_(4),have drawn much attention owing to their potential for realizing twodimensional(2D)magnetism and possible topological states.Recently,FeBi_(2)Te_(4),which is isostructural to MnBi_(2)Te_(4),has been synthesized in experiments,but its detailed magnetic ordering and band topology have not been clearly understood yet.Here,based on first-principles calculations,we investigate the magnetic and electronic properties of FeBi_(2)Te_(4)in bulk and 2D forms.We show that different from MnBi_(2)Te_(4),the magnetic ground states of bulk,single-layer,and bilayer FeBi_(2)Te_(4)all favor a 120°noncollinear antiferromagnetic ordering,and they are topologically trivial narrow-gap semiconductors.For the bilayer case,we find that a quantum anomalous Hall effect with a unit Chern number is realized in the ferromagnetic state,which may be achieved in experiment by an external magnetic field or by magnetic proximity coupling.Our work clarifies the physical properties of the new material system of FeBi_(2)Te_(4)and reveals it as a potential platform for studying magnetic frustration down to 2D limit as well as quantum anomalous Hall effect.
基金jointly sponsored by the National Natural Science Foundation of China(Grant No.41374078)the Geological Survey Projects of the Ministry of Land and Resources of China(Grant Nos.12120113086100 and 12120113101300)Beijing Higher Education Young Elite Teacher Project
文摘Traditional two-dimensional（2D） complex resistivity forward modeling is based on Poisson＇s equation but spectral induced polarization（SIP） data are the coproducts of the induced polarization（IP） and the electromagnetic induction（EMI） effects.This is especially true under high frequencies,where the EMI effect can exceed the IP effect.2D inversion that only considers the IP effect reduces the reliability of the inversion data.In this paper,we derive differential equations using Maxwell＇s equations.With the introduction of the Cole-Cole model,we use the finite-element method to conduct2 D SIP forward modeling that considers the EMI and IP effects simultaneously.The data-space Occam method,in which different constraints to the model smoothness and parametric boundaries are introduced,is then used to simultaneously obtain the four parameters of the Cole-Cole model using multi-array electric field data.This approach not only improves the stability of the inversion but also significantly reduces the solution ambiguity.To improve the computational efficiency,message passing interface programming was used to accelerate the 2D SIP forward modeling and inversion.Synthetic datasets were tested using both serial and parallel algorithms,and the tests suggest that the proposed parallel algorithm is robust and efficient.
基金the National Natural Science Foundation of China(Nos.12072166 and 11862021)the Program for Science and Technology of Inner Mongolia Autonomous Region of China(No.2021GG0254)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2020MS01006)。
文摘A mathematical model for nonlocal vibration and buckling of embedded two-dimensional(2 D) decagonal quasicrystal(QC) layered nanoplates is proposed. The Pasternak-type foundation is used to simulate the interaction between the nanoplates and the elastic medium. The exact solutions of the nonlocal vibration frequency and buckling critical load of the 2 D decagonal QC layered nanoplates are obtained by solving the eigensystem and using the propagator matrix method. The present three-dimensional(3 D) exact solution can predict correctly the nature frequencies and critical loads of the nanoplates as compared with previous thin-plate and medium-thick-plate theories.Numerical examples are provided to display the effects of the quasiperiodic direction,length-to-width ratio, thickness of the nanoplates, nonlocal parameter, stacking sequence,and medium elasticity on the vibration frequency and critical buckling load of the 2 D decagonal QC nanoplates. The results show that the effects of the quasiperiodic direction on the vibration frequency and critical buckling load depend on the length-to-width ratio of the nanoplates. The thickness of the nanoplate and the elasticity of the surrounding medium can be adjusted for optimal frequency and critical buckling load of the nanoplate.This feature is useful since the frequency and critical buckling load of the 2 D decagonal QCs as coating materials of plate structures can now be tuned as one desire.
基金the support of the National Natural Science Foundation of China(No.11572086)the Fundamental Research Funds for the Central Universities+2 种基金the Scientific Research Innovation Program of Jiangsu Province College of China(No.KYLX16_0185)the Scientific Research Foundation of Graduate School of Southeast University of China(No.YBJJ1760)the China Scholarship Council of China(No.201706090076)。
文摘To consider fiber random distribution at the microscale for the multiscale model based on the micro-mechanics failure(MMF)theory,clustering method is used for the extraction of amplification factors.As the clustering method is a kind of unsupervised machine learning method,the elements with similar mechanical behavior under external loading can be included in a cluster automatically at the microscale.With this modification,the fiber random distribution model can be used for multiscale damage analysis in the framework of MMF theory.To validate the modified multiscale analysis method,progressive damage analysis of a kind of 2D twill woven composites is conducted based on different microscale models.The stress values for microscale models with fiber hexagonal and random distribution patterns are compared first.Much higher stress concentration is generated in the fiber random distribution model due to the smaller inter-fiber distance especially under longitudinal shear loading.The obtained cluster distribution results exhibit the characters of the stress distribution in the two microscale models.Thereafter,tensile and compressive responses of the 2D twill woven composite are predicted with the modified multiscale analysis method and accuracy of the method is verified through comparison with published experimental results.From the simulation results,it can be found that the matrix damage initiation from the model based on the fiber random distribution model is premature compared with that from the model based on the fiber hexagonal distribution model.Besides,under tensile loading,the damage all initiates from the fill tows and propagates to the wrap tows.However,under compressive loading,the matrix damage initiates from the wrap tows in the model based on the fiber random distribution model.
基金funded by Natural Science Foundation of China (Grants No. 11172217 and 11432015)National Key Basic Research and Development Program (i.e., 973 Program) of China (Grant No. 2007CB714106)
文摘One of the largest known megafloods on earth resulted from a glacier dam-break,which occurred during the Late Quaternary in the Altai Mountains in Southern Siberia.Computational modeling is one of the viable approaches to enhancing the understanding of the flood events.The computational domain of this flood is over 9460 km2 and about 3.784 × 106 cells are involved as a 50 m × 50 m mesh is used,which necessitates a computationally efficient model.Here the Open MP(Open Multiprocessing) technique is adopted to parallelize the code of a coupled 2D hydrodynamic and sediment transport model.It is shown that the computational efficiency is enhanced by over 80% due to the parallelization.The floods over both fixed and mobile beds are well reproduced with specified discharge hydrographs at the dam site.Qualitatively,backwater effects during the flood are resolved at the bifurcation between the Chuja and Katun rivers.Quantitatively,the computed maximum stage and thalweg are physically consistent with the field data of the bars and deposits.The effects of sediment transport and morphological evolution on the flood are considerable.Sensitivity analyses indicate that the impact of the peak discharge is significant,whilst those of the Manningroughness,medium sediment size and shape of the inlet discharge hydrograph are marginal.
基金financially supported by the Scientific Research Startup Foundation of Xinjiang University(No.620312377)the National Science and Technology Major Project of China(No.2016ZX05053-013)
文摘The formation heterogeneity is considered as one of the major factors limiting the application of foam flooding.In this paper,influences of formation properties,such as permeability,permeability distribution,interlayer,sedimentary rhythm and 3D heterogeneity,on the mobility control capability and oil displacement efficiency of foam flooding,were systematically investigated using 2D homogeneous and 2D/3D heterogeneous models under 120°C and salinity of 20×10~4 mg/L.The flow resistance of foam was promoted as the permeability increased,which thus resulted in a considerable oil recovery behavior.In the scenario of the vertical heterogeneous formations,it was observed that the permeability of the high-permeable layer was crucial to foam mobility control,and the positive rhythm appeared favorable to improve the foam flooding performance.The additional oil recovery increased to about 40%.The interlayer was favorable for the increases in mobility reduction factor and oil recovery of foam flooding when the low permeability ratio was involved.For the 3D heterogeneous formations,foam could efficiently adjust the areal and vertical heterogeneity through mobility control and gravity segregation,and thus enhancing the oil recovery to 11%–14%.The results derived from this work may provide some insight for the field test designs of foam flooding.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62105004 and 52174141)the College Student Innovation and Entrepreneurship Fund Project(Grant No.202210361053)+4 种基金Anhui Mining Machinery and Electrical Equipment Coordination Innovation Center,Anhui University of Science&Technology(Grant No.KSJD202304)the Anhui Province Digital Agricultural Engineering Technology Research Center Open Project(Grant No.AHSZNYGC-ZXKF021)the Talent Recruitment Special Fund of Anhui University of Science and Technology(Grant No.2024yjrc175)the Graduate Innovation Fund Project of Anhui University of Science and Technology(Grant Nos.2024cx2067,2024cx2107,and 2024cx2064)Seed Support Project for Postgraduate Innovation,Entrepreneurship and Practice at Anhui University of Science and Technology(Grant No.2024cxcysj084).
文摘With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and poor encryption efficiency.To enhance performance,this paper proposes a new encryption algorithm designed to optimize parallel processing and adapt to images of varying sizes and colors.The method begins by using SHA-384 to extract the hash value of the plaintext image,which is then processed to determine the chaotic system’s initial value and block size.The image is padded and divided into blocks for further processing.A novel two-dimensional infinite collapses hyperchaotic map(2DICHM)is employed to generate the intra-block scrambling sequence,while an improved variable Joseph traversal sequence is used for inter-block scrambling.After removing the padding,3D forward and backward shift diffusions,controlled by the 2D-ICHM sequences,are applied to the scrambled image,producing the ciphertext.Simulation results demonstrate that the proposed algorithm outperforms others in terms of entropy,anti-noise resilience,correlation coefficient,robustness,and encryption efficiency.
基金supported by the National Basic Research Program of China (Grant No. 2013CBA01600)the National Natural Science Foundation of China (Grant Nos. 61261160499 and 11274154)+2 种基金the National Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2011ZX02707)the Natural Science Foundation of Jiangsu Province, China (Grant No. BK2012302)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20120091110028)
文摘Field-effect transistors （FETs） for logic applications, graphene and MoS2, are discussed. These materials have based on two representative two-dimensional （2D） materials, drastically different properties and require different consider- ations. The unique band structure of graphene necessitates engineering of the Dirac point, including the opening of the bandgap, the doping and the interface, before the graphene can be used in logic applications. On the other hand, MoS2 is a semiconductor, and its electron transport depends heavily on the surface properties, the number of layers, and the carrier density. Finally, we discuss the prospects for the future developments in 2D material transistors.
基金supported by the European Research Council(ERC Starting Grant No.2D-Pnicto Chem 804110)the Spanish MICINN(PID2019-111742GA-I00 and Unit of Excellence“María de Maeztu”CEX2019-000919-M)+2 种基金the Deutsche Forschungsgemeinschaft DFG(FLAG-ERA AB694/2-1)the Generalitat Valenciana(CIDEGENT/2018/001 and i Di FEDER/2018/061 co-financed by FEDER)CONICET for financial support and CNEA Computing Clusters for computer time(density functional theory calculations).
文摘Research on two-dimensional(2D)materials is one of the most active fields in materials science and nanotechnology.Among the members of the 2D family,layered hydroxides(LHs)represent an exceptional case of study due to their unparalleled chemical versatility which allows the modulation of their physicochemical properties at will.Nowadays,LHs based on earth-abundant metals are key materials in the areas of energy storage and conversion,hybrid materials or magnetism.α-Co hydroxides(Simonkolleite-like structures)are promising phases with tuneable electronic and magnetic properties by ligand modification.However,even in the simple case ofα-Co^(Ⅱ)hydroxychlorides,the preparation of well-defined large 2D crystals is not straightforward,hindering the development of fundamental studies.Herein,we present the synthesis of 2D hexagonal crystals with outstanding sizethickness relationship(diameter>5μm and thickness of 20±7 nm)by a simple homogeneous synthesis taking place at room temperature.In structural terms,no differences are observed between our layered materials and those obtained hydrothermally.However,dynamic susceptibility measurements alert about different arrangements of the magnetic sublattices,which have been rationalized with structural DFT calculations.This work provides an extremely easy bottom-up method to obtain high-quality 2D crystals based onα-CoIIhydroxides,paving the way for the development of fundamental studies and applications.
基金Project supported by the Republic of Moldova through the projects 15.817.02.29F and 17.80013.16.02.04/Ua
文摘We review experimental and theoretical results on thermal transport in semiconductor nanostructures（multilayer thin films, core/shell and segmented nanowires）, single-and few-layer graphene, hexagonal boron nitride, molybdenum disulfide, and black phosphorus. Different possibilities of phonon engineering for optimization of electrical and heat conductions are discussed. The role of the phonon energy spectra modification on the thermal conductivity in semiconductor nanostructures is revealed. The dependence of thermal conductivity in graphene and related two-dimensional（2 D） materials on temperature, flake size, defect concentration, edge roughness, and strain is analyzed.
