研究聚焦于闪存转换层(FTL)中间件的性能差异,在256 MB Nor Flash硬件平台上,对FlashFX和TrueFFS两种闪存转换层进行了系统性对比评估,通过测量包括扇区擦除、文件打开、文件删除、单文件写入及文件连续写入等关键操作的耗时,量化分析...研究聚焦于闪存转换层(FTL)中间件的性能差异,在256 MB Nor Flash硬件平台上,对FlashFX和TrueFFS两种闪存转换层进行了系统性对比评估,通过测量包括扇区擦除、文件打开、文件删除、单文件写入及文件连续写入等关键操作的耗时,量化分析两者性能表现。结果表明FlashFX与TrueFFS在不同操作场景下(如擦除粒度处理、写入调度策略)存在显著性能差异,TrueFFS适用于高可靠性、长寿命需求的系统,FlashFX更适合对操作速度敏感的应用,二者选择需基于具体场景的性能与寿命进行权衡。展开更多
To study the influence of support timing and support strength on the mechanical properties and deformation damage characteristics of a single-sided unloaded rock mass,a true triaxial perturbation unloaded rock testing...To study the influence of support timing and support strength on the mechanical properties and deformation damage characteristics of a single-sided unloaded rock mass,a true triaxial perturbation unloaded rock testing system was used to conduct rock damage tests on sandstone with different support timing and strength paths.Based on the acoustic emission monitoring system,the spatial and temporal evolution characteristics of the whole process of rock body loaded instability under two stress paths were studied,and the mechanism of the reinforcing effect of stress support on the unloaded rock mass was analyzed.The results show that,within the scope of this study,both earlier applications of shoring and an increase in shoring strength can effectively improve the ultimate bearing capacity of the unloaded rock,which increases the ultimate bearing capacity of the unloaded rock mass by 60.31% and 54.96%,respectively;There is a phenomenon of rebound deformation of the rock mass during sudden changes in stress(single-sided unloading,stress support),which shows opposite expansion and compression platforms on the stress−strain curve;The crack evolution of unloaded rock under different stress support conditions shows the state law of"initial crack activation→middle steady state expansion→late main crack penetration",and the lagging support significantly accelerates the crack evolution from local activation to main penetration;The single-sided unloading and stress-supporting stages have less influence on the unloading deformationsσ_(1u),σ_(2u) and support deformationsσ_(1) t,σ_(2t) in theσ_(1) andσ_(2)directions,while they show significant response characteristics toσ_(3u),σ_(vu) and σ_(3) t,σ_(vt),and with the increase of the support strength,the stress-supporting stagesσ_(3) t,σ_(vt) gradually increase and exceed the deformations generated by the unloading stagesσ_(3u),σ_(vu);The increase of support strength can effectively compensate for the rock stress loss caused by unloading,which makes the maximum,minimum,and volumetric strain support coefficients during the loading and unloading of the rock body increase gradually while the effect on the intermediate principal strain support coefficient is small;During loading,the support strength of rock masses seeks a new bearing area by regulating stress equilibrium states.This process primarily manifests as a shift in the locations of the crushing zone and the main bearing area,accompanied by a corresponding transformation in failure patterns.Consequently,the rock mass transitions from asymmetric three-zone damage under no or weak support to approximate symmetric three-zone damage under strong support.Simultaneously,the main load-bearing area of the rock mass shifts from deep bearing in the unsupported to middle bearing under strong support as the support strength increases.展开更多
High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear beh...High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.展开更多
The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of ke...The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.展开更多
The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled p...The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled phased array antenna system is a necessary trend for the future development of the phased array,and it is also a major focus and difficulty in the current research of integrated microwave photonics.This paper firstly introduces the basic principle and development history of optical true time delay phased array antenna system based on microwave photonics,and briefly introduces the main implementation methods and integration platform of optical true time delay.Then,the application and development prospect of optical true time delay technology in beam control of phased array antenna system are mainly presented.Finally,according to the current research progress,the possible research directions of integrated optically controlled phased array antenna systems in the future are proposed.展开更多
To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturin...To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturing coal was developed,considering the coal heterogeneity and thermophysical parameters of nitrogen.The accuracy and applicability of model were verified by comparing with LN_(2) injection pre-cooling and fracturing experimental data.The effects of different pre-cooling times and horizontal stress ratios on coal damage evolution,permeability,temperature distribution,and fracture characteristics were analyzed.The results show that the permeability and damage of the coal increase exponentially,while the temperature decreases exponentially during the fracturing process.As the pre-cooling time increases,the damage range of the coal expands,and the fracture propagation becomes more pronounced.The initiation pressure and rupture pressure decrease and tend to stabilize with longer precooling times.As the horizontal stress ratio increases,fractures preferentially extend along the direction of maximum horizontal principal stress,leading to a significant decrease in both initiation and rupture pressures.At a horizontal stress ratio of 3,the initiation pressure drops by 48.07%,and the rupture pressure decreases by 41.36%.The results provide a theoretical basis for optimizing LN_(2) fracturing techniques and improving coal seam modification.展开更多
A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states...A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states.The experimental results indicate that the dip angle of structural plane(θ)and the intermediate principal stress(σ2)have an important influence on the peak strength,cracking mode,and rockburst severity.The peak strength exhibits a first increase and then decrease as a function ofσ2 for a constantθ.However,whenσ2 is constant,the maximum peak strength is obtained atθof 90°,and the minimum peak strength is obtained atθof 30°or 45°.For the case of an inclined structural plane,the crack type at the tips of structural plane transforms from a mix of wing and anti-wing cracks to wing cracks with an increase inσ2,while the crack type around the tips of structural plane is always anti-wing cracks for the vertical structural plane,accompanied by a series of tensile cracks besides.The specimens with structural plane do not undergo slabbing failure regardless ofθ,and always exhibit composite tensile-shear failure whatever theσ2 value is.With an increase inσ2 andθ,the intensity of the rockburst is consistent with the tendency of the peak strength.By analyzing the relationship between the cohesion(c),internal friction angle(φ),andθin sandstone specimens,we incorporateθinto the true triaxial unloading strength criterion,and propose a modified linear Mogi-Coulomb criterion.Moreover,the crack propagation mechanism at the tips of structural plane,and closure degree of the structural plane under true triaxial unloading conditions are also discussed and summarized.This study provides theoretical guidance for stability assessment of surrounding rocks containing geological structures in deep complex stress environments.展开更多
The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compressio...The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.展开更多
We report the fabrication of an 8-meter-long thin-flm lithium niobate optical true delay line using the photolithography-assisted chemomechanical etching technique,showing a low transmission loss of 0.036 dB/cm in the...We report the fabrication of an 8-meter-long thin-flm lithium niobate optical true delay line using the photolithography-assisted chemomechanical etching technique,showing a low transmission loss of 0.036 dB/cm in the conventional telecom band.展开更多
COMPUTATIONAL knowledge vision[1]is emphasized as a novel perspective or field in this paper.It first proposes the visual hierarchy and its connection to knowledge,stating that knowledge is a justified true belief.To ...COMPUTATIONAL knowledge vision[1]is emphasized as a novel perspective or field in this paper.It first proposes the visual hierarchy and its connection to knowledge,stating that knowledge is a justified true belief.To further the previous research,we concisely summarize our recent works and suggest a new direction that knowledge is also a thought framework in vision.展开更多
文摘研究聚焦于闪存转换层(FTL)中间件的性能差异,在256 MB Nor Flash硬件平台上,对FlashFX和TrueFFS两种闪存转换层进行了系统性对比评估,通过测量包括扇区擦除、文件打开、文件删除、单文件写入及文件连续写入等关键操作的耗时,量化分析两者性能表现。结果表明FlashFX与TrueFFS在不同操作场景下(如擦除粒度处理、写入调度策略)存在显著性能差异,TrueFFS适用于高可靠性、长寿命需求的系统,FlashFX更适合对操作速度敏感的应用,二者选择需基于具体场景的性能与寿命进行权衡。
基金Projects(2023 YFC 2907602,2022 YFF 1303302)supported by the National Key Research and Development Project of ChinaProject(52342404)supported by the National Natural Science Foundation of China+2 种基金Project(GXXT-2021-075)supported by the University Synergy Innovation Program of Anhui Province,ChinaProject(2022AH010053)supported by Excellent Scientific Research and Innovation Team of Universities in Anhui Province,ChinaProject(2022xscx080)supported by Anhui Provincial Department of Education Graduate Student Academic Innovation Fund,China。
文摘To study the influence of support timing and support strength on the mechanical properties and deformation damage characteristics of a single-sided unloaded rock mass,a true triaxial perturbation unloaded rock testing system was used to conduct rock damage tests on sandstone with different support timing and strength paths.Based on the acoustic emission monitoring system,the spatial and temporal evolution characteristics of the whole process of rock body loaded instability under two stress paths were studied,and the mechanism of the reinforcing effect of stress support on the unloaded rock mass was analyzed.The results show that,within the scope of this study,both earlier applications of shoring and an increase in shoring strength can effectively improve the ultimate bearing capacity of the unloaded rock,which increases the ultimate bearing capacity of the unloaded rock mass by 60.31% and 54.96%,respectively;There is a phenomenon of rebound deformation of the rock mass during sudden changes in stress(single-sided unloading,stress support),which shows opposite expansion and compression platforms on the stress−strain curve;The crack evolution of unloaded rock under different stress support conditions shows the state law of"initial crack activation→middle steady state expansion→late main crack penetration",and the lagging support significantly accelerates the crack evolution from local activation to main penetration;The single-sided unloading and stress-supporting stages have less influence on the unloading deformationsσ_(1u),σ_(2u) and support deformationsσ_(1) t,σ_(2t) in theσ_(1) andσ_(2)directions,while they show significant response characteristics toσ_(3u),σ_(vu) and σ_(3) t,σ_(vt),and with the increase of the support strength,the stress-supporting stagesσ_(3) t,σ_(vt) gradually increase and exceed the deformations generated by the unloading stagesσ_(3u),σ_(vu);The increase of support strength can effectively compensate for the rock stress loss caused by unloading,which makes the maximum,minimum,and volumetric strain support coefficients during the loading and unloading of the rock body increase gradually while the effect on the intermediate principal strain support coefficient is small;During loading,the support strength of rock masses seeks a new bearing area by regulating stress equilibrium states.This process primarily manifests as a shift in the locations of the crushing zone and the main bearing area,accompanied by a corresponding transformation in failure patterns.Consequently,the rock mass transitions from asymmetric three-zone damage under no or weak support to approximate symmetric three-zone damage under strong support.Simultaneously,the main load-bearing area of the rock mass shifts from deep bearing in the unsupported to middle bearing under strong support as the support strength increases.
基金support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)supported by the Taishan Scholars Program and Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety(Grant No.SKLGME023003).
文摘High geo-stress and high temperature in deep rock engineering increase the possibility of engineering and geological disasters in discontinuous rocks.However,the influence of thermomechanical coupling on the shear behavior and damage evolution of prefractured granite remains immature.In this context,true triaxial laboratory tests and discrete element method simulations under different confining pressures(σ3=3 MPa,σ2=4 MPa,andσ3=80 MPa,σ2=100 MPa)and temperatures(25℃-500℃)were carried out on rough granite fractures with two different orientations.Results indicate that high temperature and high confining pressure increase the peak strength of the prefractured specimen,leading to more microcracks in the host rock and more gouges between the surfaces.Thermal strengthening at low temperatures(<300℃)and residual stick-slip only occur under a greater confining pressure for prefractured specimens.High confining pressure suppresses generation of the thermal microcracks in the heating stage.Cracks first initiate in the asperities on the fracture surfaces,and then propagate into the rock matrix during the mechanical loading stage.In addition,prefractured granite with a larger fracture angle is characterized by smaller peak and residual strength,faster residual slip,fewer new cracks on the specimen surface,and a more pronounced thermal strengthening effect on peak strength.The slip tendency analysis indicates that a higher maximum principal stress(s1)and a large fracture angle(45°-75°)generally result in a higher potential for fracture slip or activation.This study will contribute to a better understanding of the fracture shear mechanism under true triaxial thermomechanical coupling conditions and provides new insights into the stability evaluation of deep dynamic geological hazards.
基金supported by the National Natural Science Foundation of China(Grant No.52104060)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QE015).
文摘The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.
基金supported by Fund of State Key Laboratory of IPOC(BUPT)(No.IPOC2021ZT16),China.
文摘The integrated optical true time delay phased array antenna system has the advantages of high bandwidth,small size,low loss and strong antiinterference capability,etc.The high integration of the optically controlled phased array antenna system is a necessary trend for the future development of the phased array,and it is also a major focus and difficulty in the current research of integrated microwave photonics.This paper firstly introduces the basic principle and development history of optical true time delay phased array antenna system based on microwave photonics,and briefly introduces the main implementation methods and integration platform of optical true time delay.Then,the application and development prospect of optical true time delay technology in beam control of phased array antenna system are mainly presented.Finally,according to the current research progress,the possible research directions of integrated optically controlled phased array antenna systems in the future are proposed.
基金financially supported by the National Natural Science Foundation of China(Nos.51874236 and 52174207)Shaanxi Science and Technology Innovation Team(No.2022TD02)Henan University of Science and Technology PhD Funded Projects(No.B2025-9)。
文摘To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturing coal was developed,considering the coal heterogeneity and thermophysical parameters of nitrogen.The accuracy and applicability of model were verified by comparing with LN_(2) injection pre-cooling and fracturing experimental data.The effects of different pre-cooling times and horizontal stress ratios on coal damage evolution,permeability,temperature distribution,and fracture characteristics were analyzed.The results show that the permeability and damage of the coal increase exponentially,while the temperature decreases exponentially during the fracturing process.As the pre-cooling time increases,the damage range of the coal expands,and the fracture propagation becomes more pronounced.The initiation pressure and rupture pressure decrease and tend to stabilize with longer precooling times.As the horizontal stress ratio increases,fractures preferentially extend along the direction of maximum horizontal principal stress,leading to a significant decrease in both initiation and rupture pressures.At a horizontal stress ratio of 3,the initiation pressure drops by 48.07%,and the rupture pressure decreases by 41.36%.The results provide a theoretical basis for optimizing LN_(2) fracturing techniques and improving coal seam modification.
基金supports from the National Natural Science Foundation of China (Grant Nos.52004143 and 52374095)the open fund for the Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines (Grant No.SKLMRDPC21KF06).
文摘A series of true triaxial unloading tests are conducted on sandstone specimens with a single structural plane to investigate their mechanical behaviors and failure characteristics under different in situ stress states.The experimental results indicate that the dip angle of structural plane(θ)and the intermediate principal stress(σ2)have an important influence on the peak strength,cracking mode,and rockburst severity.The peak strength exhibits a first increase and then decrease as a function ofσ2 for a constantθ.However,whenσ2 is constant,the maximum peak strength is obtained atθof 90°,and the minimum peak strength is obtained atθof 30°or 45°.For the case of an inclined structural plane,the crack type at the tips of structural plane transforms from a mix of wing and anti-wing cracks to wing cracks with an increase inσ2,while the crack type around the tips of structural plane is always anti-wing cracks for the vertical structural plane,accompanied by a series of tensile cracks besides.The specimens with structural plane do not undergo slabbing failure regardless ofθ,and always exhibit composite tensile-shear failure whatever theσ2 value is.With an increase inσ2 andθ,the intensity of the rockburst is consistent with the tendency of the peak strength.By analyzing the relationship between the cohesion(c),internal friction angle(φ),andθin sandstone specimens,we incorporateθinto the true triaxial unloading strength criterion,and propose a modified linear Mogi-Coulomb criterion.Moreover,the crack propagation mechanism at the tips of structural plane,and closure degree of the structural plane under true triaxial unloading conditions are also discussed and summarized.This study provides theoretical guidance for stability assessment of surrounding rocks containing geological structures in deep complex stress environments.
基金financially supported by the National Natural Science Foundation of China(Nos.52174092,51904290,and 52374147)the Natural Science Foundation of Jiangsu Province,China(No.BK20220157)+2 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)the National Key Research and Development Program of China(No.2023YFC3804204)the Major Program of Xinjiang Uygur Autonomous Region S cience and Technology(No.2023A01002)。
文摘The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.
基金supported by the National Natural Science Foundation of China(Grant Nos.12192251,12334014,92480001,12134001,12304418,12274130,12274133,12474378,and 12404378)the National Key R&D Program of China(Grant Nos.2022YFA1404600 and 2022YFA1205100)+2 种基金Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301403)the Engineering Research Center for Nanophotonics&Advanced Instrument,Ministry of Education,East China Normal University(Grant No.2023nmc005)。
文摘We report the fabrication of an 8-meter-long thin-flm lithium niobate optical true delay line using the photolithography-assisted chemomechanical etching technique,showing a low transmission loss of 0.036 dB/cm in the conventional telecom band.
基金supported in part by the Natural Science Foundation of China(62303361)in part by the Hainan Provincial Natural Science Foundation of China(623QN266)+2 种基金the Fundamental Research Funds for the Central Universities(WUT:233110002)in part by the University-Industry Collaborative Education Program(231002531131826)in part by the National Key R&D Program of China(2018AAA0101502)
文摘COMPUTATIONAL knowledge vision[1]is emphasized as a novel perspective or field in this paper.It first proposes the visual hierarchy and its connection to knowledge,stating that knowledge is a justified true belief.To further the previous research,we concisely summarize our recent works and suggest a new direction that knowledge is also a thought framework in vision.
