ZK60B(Mg-6%Zn-0.6%Zr)alloy joints fabricated by bobbin tool friction stir welding(BTFSW)with various traverse speeds were investigated.The sound joint fabricated by the BTFSW was possible under the appropriate welding...ZK60B(Mg-6%Zn-0.6%Zr)alloy joints fabricated by bobbin tool friction stir welding(BTFSW)with various traverse speeds were investigated.The sound joint fabricated by the BTFSW was possible under the appropriate welding parameters.The severe plastic deformation during BTFSW resulted in dispersion and segregation of the Zr-rich particles within the stirred zone(SZ)followed by evolution of a bimodal grain structure with distributed bands of 0.8-1.7μm ultrafine grains and 4.1-7.1μm equiaxed grains.Micro-hardness of SZ is substantially reduced in contrast to that of parent metal(PM)in spite of the finer grain size owing to dissolution of Mg-Zn based precipitates having hardening effects on alpha-Mg matrix.With the decrease in traverse speed,randomization degree of the plasticized metal flow increases,which is evidenced by the randomized arc line pattern at the low traverse speed.Among all defect-free joints,the 200 mm/min joint exhibits the weakest isotropy of texture within SZ and the best tensile properties,which has reduced ultimate tensile strength and yield strength by 5.4% and by 22.2%,respectively,as compared to the PM.The randomized texture hinders the joint fracturing within SZ at low elongation.Therefore,a relatively high elongation of 10.8% was achieved,which corresponded to 72% of the PM value.展开更多
The multi-scale expression of enormously complicated laneway data requires differentiation of both contents and the way the contents are expressed. To accomplish multi-scale expression laneway data must support multi-...The multi-scale expression of enormously complicated laneway data requires differentiation of both contents and the way the contents are expressed. To accomplish multi-scale expression laneway data must support multi-scale transformation and have consistent topological relationships. Although the laneway data generated by traverse survey-ing is non-scale data it is still impossible to construct a multi-scale spatial database directly from it. In this paper an al-gorithm is presented to first calculate the laneway mid-line to support multi-scale transformation; then to express topo-logical relationships arising from the data structure; and,finally,a laneway spatial database is built and multi-scale ex-pression is achieved using components GIS-SuperMap Objects. The research result is of great significance for improv-ing the efficiency of laneway data storage and updating,for ensuring consistency of laneway data expression and for extending the potential value of a mine spatial database.展开更多
Some GPS points were set up and occupied and reoccupied along the traverse route from Zhongshan Station to DomeA.The result analysis for the GPS data processed by GAMIT/GLOBK package was presented in this paper.It was...Some GPS points were set up and occupied and reoccupied along the traverse route from Zhongshan Station to DomeA.The result analysis for the GPS data processed by GAMIT/GLOBK package was presented in this paper.It was indicated that the ice along the traverse route flowed with an 825 m/a velocity to the northwest in the last three years,which was the direction of the edge of the ice sheet.The maximum horizontal flow velocity is about 100 m/a.Moreover,due to the ice flow,a 0.21 m/a sedimentation rate is achieved.Finally,a 15 m/a 2 horizontal acceleration is achieved from the GPS data of the three different stages.展开更多
The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent lav...The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone.This paper reports the direct effect of magnetically constricted arc traverse speed(MCATS)on bead profile,tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding(GTCAW)process.The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing.It is correlated to the solidification conditions during welding.The relationship between MCATS and Arc Constriction Current(ACC)was derived.Its interaction effect on the magnetic arc constriction and joint performance was analysed.Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties(98.39% of base metal strength with 31.50% elongation).It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer,discrete laves phase in interdendritic areas.展开更多
This paper advances a new simplified formula for estimating variance components ,sums up the basic law to calculate the weights of observed values and a circulation method using the increaments of weights when estimat...This paper advances a new simplified formula for estimating variance components ,sums up the basic law to calculate the weights of observed values and a circulation method using the increaments of weights when estimating the variance components of traverse nets,advances the charicteristic roots method to estimate the variance components of traveres nets and presents a practical method to make two real and symmetric matrices two diagonal ones.展开更多
The effects of S86019, an active component from Puralia lobata, on the induction of cell differentiation and cell cycle traverse of HL-60 cells were described. It was shown that cell proliferation of HL-60 cells was i...The effects of S86019, an active component from Puralia lobata, on the induction of cell differentiation and cell cycle traverse of HL-60 cells were described. It was shown that cell proliferation of HL-60 cells was inhibited by S86019 in vitro. Under the action of S86019 the HL-60 cells were induced to differentiate into metamyelocytes, myelocytes and much matured cells with banded or segmented nucleus. Flow cytometry demonstrated that the cell population of HL-60 cells was blocked at G1 phase which resulted in the elevation of percentage of G1 cells and decrease of percentage of cells in S phase. Experimental results demonstrated that S86019 is an active inducer of cell differentiation in HL-60 cells.展开更多
This paper includes a short historical review of Russian and Soviet scientific traverses to study the Antarctic inland. The first traverse left on April 2, 1956. It resulted in the opening of the first Russian inland ...This paper includes a short historical review of Russian and Soviet scientific traverses to study the Antarctic inland. The first traverse left on April 2, 1956. It resulted in the opening of the first Russian inland research station named Pionerskaya and provided the first geophysical and glaciological data on regions inland of the Antarctic coast. By 1965, a number of regional inland scientific traverses had been completed and. the first Atlas of Antarctica was published in 1966. The atlas presented the main achievements of that time. After the discovery of Lake Vostok, Russian scientists commenced remote sensing investigations to study this unique natural phenomenon. The propagation of acoustic and electromagnetic waves in the glacier near Vostok Station were measured to provide important geophysical data. Radio-echo sounding data showed that Lake Vostok is isolated and separated from the rest of the Antarctic subglacial hydrosphere. The total area of the lake is 15 790 km2, excluding 365 km^2 occupied by 11 islands. Reflection seismic soundings of Lake Vostok estimated a total volume of about 6 100 km^3, an average depth of about 400 m, and a maximum depth of 1 200 m. Since 2008, there have been a number of scientific traverses between Mirny and Vostok stations and between Progress and Vostok stations. The data collected during the traverses have provided new insights into sub-ice topography and ice sheet structure, and have led to the discovery of subglacial lakes near Komsomolskaya Station and under Pionerskaya Station.展开更多
A gravity survey was conducted along the Mizuho traverse routes in austral summer of 1999-2000 by the 41st Japanese Antarctic Research Expedition (JARE-41). The main purpose of the survey was to obtain detail gravity ...A gravity survey was conducted along the Mizuho traverse routes in austral summer of 1999-2000 by the 41st Japanese Antarctic Research Expedition (JARE-41). The main purpose of the survey was to obtain detail gravity anomaly along the traverse routes, where deep seismic exploration was simultaneously conducted in order to obtain a fine crustal structure of the Mizuho Plateau. By using SCINTREX (CG-3M) gravity meter, the survey was carried out at 160 sites with about 1 km interval in a distance of 190 km from S16 to Z20 on the traverse routes. Free-air and Bouguer anomalies were calculated using precise locations by GPS measurements, by taking into account an effect of the thick icesheet. The furrowed negative Free-air anomalies are identified around H192, where middle points of the whole traverse routes. Two bedrock elevation models derived both by seismic refraction analyses and radio-echo sounding might correspond to the bottom and the top of a mixture layer composed from ice-moraine rocks over the bedrock surface. Thickness of the crust estimated by Bouguer anomalies is 0.5 - 1 km larger toward inland at the terminal point of Z20 along the profile.展开更多
The interaction of oblique incident waves with infinite number of perforated caissons is investigated. The fluid domain is divided into infinite sub-domains by the caissons, and eigen-function expansion is applied to ...The interaction of oblique incident waves with infinite number of perforated caissons is investigated. The fluid domain is divided into infinite sub-domains by the caissons, and eigen-function expansion is applied to expand velocity potentials in each domain. A phase relation is introduced for wave oscillation in each caisson, and the structure geometry is considered in constructing the models of reflection waves. The reflected waves with the present analysis include all of the waves traveling in different directions when incident wave period is short. Numerical examinations show that velocities at the inner and outer sides of the front walls of caissons ase close to each other, and reflection coefficients satisfy the energy conservation relation very well when porous effect parameter is infinite. Numerical results show that the reflection coefficients of oblique incident waves are smaller for shorter caissons at low frequency, and decrease with the increase of wave incident angle.展开更多
To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of ske...To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of skeleton-free,traversing secondary lining trolley has been developed.This trolley features a set of gantries paired with two sets of formwork.The formwork adopts a multi-segment hinged and strengthened design,ensuring its own strength can meet the requirements of secondary lining concrete pouring without relying on the support of the gantries.When retracted,the formwork can be transported by the gantries through another set of formwork in the supporting state,enabling early formwork support,effectively accelerating the construction progress of the tunnel’s secondary lining,and extending the maintenance time of the secondary lining with the formwork.Finite element software modeling was used for simulation calculations,and the results indicate that the structural strength,stiffness,and other performance parameters of the new secondary lining trolley meet the design requirements,verifying the rationality of the design.展开更多
Shu Embroidery:Traversing over three thousand years Shu Embroidery is a famous traditional art from Sichuan Province in China.This beautiful craft has been practiced for over three thousand years and is an important p...Shu Embroidery:Traversing over three thousand years Shu Embroidery is a famous traditional art from Sichuan Province in China.This beautiful craft has been practiced for over three thousand years and is an important part of Sichuans cultural heritage.Shu Embroidery is known for its bright colors,detailed patterns and intricate craftsmanship.展开更多
The dynamic routing mechanism in evolvable networks enables adaptive reconfiguration of topol-ogical structures and transmission pathways based on real-time task requirements and data character-istics.However,the heig...The dynamic routing mechanism in evolvable networks enables adaptive reconfiguration of topol-ogical structures and transmission pathways based on real-time task requirements and data character-istics.However,the heightened architectural complexity and expanded parameter dimensionality in evolvable networks present significant implementation challenges when deployed in resource-con-strained environments.Due to the critical paths ignored,traditional pruning strategies cannot get a desired trade-off between accuracy and efficiency.For this reason,a critical path retention pruning(CPRP)method is proposed.By deeply traversing the computational graph,the dependency rela-tionship among nodes is derived.Then the nodes are grouped and sorted according to their contribu-tion value.The redundant operations are removed as much as possible while ensuring that the criti-cal path is not affected.As a result,computational efficiency is improved while a higher accuracy is maintained.On the CIFAR benchmark,the experimental results demonstrate that CPRP-induced pruning incurs accuracy degradation below 4.00%,while outperforming traditional feature-agnostic grouping methods by an average 8.98%accuracy improvement.Simultaneously,the pruned model attains a 2.41 times inference acceleration while achieving 48.92%parameter compression and 53.40%floating-point operations(FLOPs)reduction.展开更多
With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and po...With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and poor encryption efficiency.To enhance performance,this paper proposes a new encryption algorithm designed to optimize parallel processing and adapt to images of varying sizes and colors.The method begins by using SHA-384 to extract the hash value of the plaintext image,which is then processed to determine the chaotic system’s initial value and block size.The image is padded and divided into blocks for further processing.A novel two-dimensional infinite collapses hyperchaotic map(2DICHM)is employed to generate the intra-block scrambling sequence,while an improved variable Joseph traversal sequence is used for inter-block scrambling.After removing the padding,3D forward and backward shift diffusions,controlled by the 2D-ICHM sequences,are applied to the scrambled image,producing the ciphertext.Simulation results demonstrate that the proposed algorithm outperforms others in terms of entropy,anti-noise resilience,correlation coefficient,robustness,and encryption efficiency.展开更多
Aiming at the problem that only some types of SPARQL （ simple protocal and resource description framework query language） queries can be answered by using the current resource description framework link traversal ba...Aiming at the problem that only some types of SPARQL （ simple protocal and resource description framework query language） queries can be answered by using the current resource description framework link traversal based query execution （RDF-LTE） approach, this paper discusses how the execution order of the triple pattern affects the query results and cost based on concrete SPARQL queries, and analyzes two properties of the web of linked data, missing backward links and missing contingency solution. Then three heuristic principles for logic query plan optimization, namely, the filtered basic graph pattern （FBGP） principle, the triple pattern chain principle and the seed URIs principle, are proposed. The three principles contribute to decrease the intermediate solutions and increase the types of queries that can be answered. The effectiveness and feasibility of the proposed approach is evaluated. The experimental results show that more query results can be returned with less cost, thus enabling users to develop the full potential of the web of linked data.展开更多
An attempt has been made with overlaying of stain-less steel on mild steel by the technique of friction surfacing. This investigation elaborates the excellence acquired by different combination of the process paramete...An attempt has been made with overlaying of stain-less steel on mild steel by the technique of friction surfacing. This investigation elaborates the excellence acquired by different combination of the process parameters used in friction surfacing specifically traverse speed of the cross slide, speed of rotation of the spindle and the uniaxial compressive load. Excellent overlaying has been obtained amongst the chosen materials. To which, the coating can be done with various set of process parameters. It has been observed that the bond strength of the coating was found to be at a maximum of 502 MPa by ram tensile test.Based upon this results the surface methodology was characterized with scanning electron microscope.For authenticating the results, the coated specimen was subjected to salt spray test. The bonding microstructure was characterized using optical microscopy and X-ray diffraction. Corrosion resistance of surfaced coatings was found to be more inferior to that of mechtrode material and greater with the substrate.展开更多
基金sponsored by the National Science and Technology Major Project(No.2017ZX04005001)the Key Research and Development program of Shandong(No.2018GGX103053)。
文摘ZK60B(Mg-6%Zn-0.6%Zr)alloy joints fabricated by bobbin tool friction stir welding(BTFSW)with various traverse speeds were investigated.The sound joint fabricated by the BTFSW was possible under the appropriate welding parameters.The severe plastic deformation during BTFSW resulted in dispersion and segregation of the Zr-rich particles within the stirred zone(SZ)followed by evolution of a bimodal grain structure with distributed bands of 0.8-1.7μm ultrafine grains and 4.1-7.1μm equiaxed grains.Micro-hardness of SZ is substantially reduced in contrast to that of parent metal(PM)in spite of the finer grain size owing to dissolution of Mg-Zn based precipitates having hardening effects on alpha-Mg matrix.With the decrease in traverse speed,randomization degree of the plasticized metal flow increases,which is evidenced by the randomized arc line pattern at the low traverse speed.Among all defect-free joints,the 200 mm/min joint exhibits the weakest isotropy of texture within SZ and the best tensile properties,which has reduced ultimate tensile strength and yield strength by 5.4% and by 22.2%,respectively,as compared to the PM.The randomized texture hinders the joint fracturing within SZ at low elongation.Therefore,a relatively high elongation of 10.8% was achieved,which corresponded to 72% of the PM value.
基金Project 2005B018 supported by the Science Foundation of China University of Mining and Technology
文摘The multi-scale expression of enormously complicated laneway data requires differentiation of both contents and the way the contents are expressed. To accomplish multi-scale expression laneway data must support multi-scale transformation and have consistent topological relationships. Although the laneway data generated by traverse survey-ing is non-scale data it is still impossible to construct a multi-scale spatial database directly from it. In this paper an al-gorithm is presented to first calculate the laneway mid-line to support multi-scale transformation; then to express topo-logical relationships arising from the data structure; and,finally,a laneway spatial database is built and multi-scale ex-pression is achieved using components GIS-SuperMap Objects. The research result is of great significance for improv-ing the efficiency of laneway data storage and updating,for ensuring consistency of laneway data expression and for extending the potential value of a mine spatial database.
文摘Some GPS points were set up and occupied and reoccupied along the traverse route from Zhongshan Station to DomeA.The result analysis for the GPS data processed by GAMIT/GLOBK package was presented in this paper.It was indicated that the ice along the traverse route flowed with an 825 m/a velocity to the northwest in the last three years,which was the direction of the edge of the ice sheet.The maximum horizontal flow velocity is about 100 m/a.Moreover,due to the ice flow,a 0.21 m/a sedimentation rate is achieved.Finally,a 15 m/a 2 horizontal acceleration is achieved from the GPS data of the three different stages.
基金funded by Indian Space Research Organization (ISRO) India. Project No. ISRO/RES/3/728/16e17
文摘The magnetically constricted arc technique was implemented to mitigate the heat input related metallurgical problems in Gas Tungsten Arc Welding(GTAW)of Inconel 718 alloy particularly Nb segregation and subsequent laves phase evolution in fusion zone.This paper reports the direct effect of magnetically constricted arc traverse speed(MCATS)on bead profile,tensile properties and microstructural evolution of Inconel 718 alloy sheets joined by Gas Tungsten Constricted Arc Welding(GTCAW)process.The mechanism amenable for the microstructural modification and corresponding influence on the tensile properties of joints is investigated both in qualitative and quantitative manner related to the mechanics of arc constriction and pulsing.It is correlated to the solidification conditions during welding.The relationship between MCATS and Arc Constriction Current(ACC)was derived.Its interaction effect on the magnetic arc constriction and joint performance was analysed.Results showed that the joints fabricated using CATS of 70 mm/min exhibited superior tensile properties(98.39% of base metal strength with 31.50% elongation).It is attributed to the grain refinement in fusion zone microstructure leading to the evolution of finer,discrete laves phase in interdendritic areas.
文摘This paper advances a new simplified formula for estimating variance components ,sums up the basic law to calculate the weights of observed values and a circulation method using the increaments of weights when estimating the variance components of traverse nets,advances the charicteristic roots method to estimate the variance components of traveres nets and presents a practical method to make two real and symmetric matrices two diagonal ones.
文摘The effects of S86019, an active component from Puralia lobata, on the induction of cell differentiation and cell cycle traverse of HL-60 cells were described. It was shown that cell proliferation of HL-60 cells was inhibited by S86019 in vitro. Under the action of S86019 the HL-60 cells were induced to differentiate into metamyelocytes, myelocytes and much matured cells with banded or segmented nucleus. Flow cytometry demonstrated that the cell population of HL-60 cells was blocked at G1 phase which resulted in the elevation of percentage of G1 cells and decrease of percentage of cells in S phase. Experimental results demonstrated that S86019 is an active inducer of cell differentiation in HL-60 cells.
基金supported by the Russian Foundation for Basic Research (RFBR), research project No. 14-05-00234-а
文摘This paper includes a short historical review of Russian and Soviet scientific traverses to study the Antarctic inland. The first traverse left on April 2, 1956. It resulted in the opening of the first Russian inland research station named Pionerskaya and provided the first geophysical and glaciological data on regions inland of the Antarctic coast. By 1965, a number of regional inland scientific traverses had been completed and. the first Atlas of Antarctica was published in 1966. The atlas presented the main achievements of that time. After the discovery of Lake Vostok, Russian scientists commenced remote sensing investigations to study this unique natural phenomenon. The propagation of acoustic and electromagnetic waves in the glacier near Vostok Station were measured to provide important geophysical data. Radio-echo sounding data showed that Lake Vostok is isolated and separated from the rest of the Antarctic subglacial hydrosphere. The total area of the lake is 15 790 km2, excluding 365 km^2 occupied by 11 islands. Reflection seismic soundings of Lake Vostok estimated a total volume of about 6 100 km^3, an average depth of about 400 m, and a maximum depth of 1 200 m. Since 2008, there have been a number of scientific traverses between Mirny and Vostok stations and between Progress and Vostok stations. The data collected during the traverses have provided new insights into sub-ice topography and ice sheet structure, and have led to the discovery of subglacial lakes near Komsomolskaya Station and under Pionerskaya Station.
文摘A gravity survey was conducted along the Mizuho traverse routes in austral summer of 1999-2000 by the 41st Japanese Antarctic Research Expedition (JARE-41). The main purpose of the survey was to obtain detail gravity anomaly along the traverse routes, where deep seismic exploration was simultaneously conducted in order to obtain a fine crustal structure of the Mizuho Plateau. By using SCINTREX (CG-3M) gravity meter, the survey was carried out at 160 sites with about 1 km interval in a distance of 190 km from S16 to Z20 on the traverse routes. Free-air and Bouguer anomalies were calculated using precise locations by GPS measurements, by taking into account an effect of the thick icesheet. The furrowed negative Free-air anomalies are identified around H192, where middle points of the whole traverse routes. Two bedrock elevation models derived both by seismic refraction analyses and radio-echo sounding might correspond to the bottom and the top of a mixture layer composed from ice-moraine rocks over the bedrock surface. Thickness of the crust estimated by Bouguer anomalies is 0.5 - 1 km larger toward inland at the terminal point of Z20 along the profile.
文摘The interaction of oblique incident waves with infinite number of perforated caissons is investigated. The fluid domain is divided into infinite sub-domains by the caissons, and eigen-function expansion is applied to expand velocity potentials in each domain. A phase relation is introduced for wave oscillation in each caisson, and the structure geometry is considered in constructing the models of reflection waves. The reflected waves with the present analysis include all of the waves traveling in different directions when incident wave period is short. Numerical examinations show that velocities at the inner and outer sides of the front walls of caissons ase close to each other, and reflection coefficients satisfy the energy conservation relation very well when porous effect parameter is infinite. Numerical results show that the reflection coefficients of oblique incident waves are smaller for shorter caissons at low frequency, and decrease with the increase of wave incident angle.
文摘To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of skeleton-free,traversing secondary lining trolley has been developed.This trolley features a set of gantries paired with two sets of formwork.The formwork adopts a multi-segment hinged and strengthened design,ensuring its own strength can meet the requirements of secondary lining concrete pouring without relying on the support of the gantries.When retracted,the formwork can be transported by the gantries through another set of formwork in the supporting state,enabling early formwork support,effectively accelerating the construction progress of the tunnel’s secondary lining,and extending the maintenance time of the secondary lining with the formwork.Finite element software modeling was used for simulation calculations,and the results indicate that the structural strength,stiffness,and other performance parameters of the new secondary lining trolley meet the design requirements,verifying the rationality of the design.
文摘Shu Embroidery:Traversing over three thousand years Shu Embroidery is a famous traditional art from Sichuan Province in China.This beautiful craft has been practiced for over three thousand years and is an important part of Sichuans cultural heritage.Shu Embroidery is known for its bright colors,detailed patterns and intricate craftsmanship.
基金Supported by the National Key Research and Development Program of China(No.2022ZD0119003)and the National Natural Science Founda-tion of China(No.61834005).
文摘The dynamic routing mechanism in evolvable networks enables adaptive reconfiguration of topol-ogical structures and transmission pathways based on real-time task requirements and data character-istics.However,the heightened architectural complexity and expanded parameter dimensionality in evolvable networks present significant implementation challenges when deployed in resource-con-strained environments.Due to the critical paths ignored,traditional pruning strategies cannot get a desired trade-off between accuracy and efficiency.For this reason,a critical path retention pruning(CPRP)method is proposed.By deeply traversing the computational graph,the dependency rela-tionship among nodes is derived.Then the nodes are grouped and sorted according to their contribu-tion value.The redundant operations are removed as much as possible while ensuring that the criti-cal path is not affected.As a result,computational efficiency is improved while a higher accuracy is maintained.On the CIFAR benchmark,the experimental results demonstrate that CPRP-induced pruning incurs accuracy degradation below 4.00%,while outperforming traditional feature-agnostic grouping methods by an average 8.98%accuracy improvement.Simultaneously,the pruned model attains a 2.41 times inference acceleration while achieving 48.92%parameter compression and 53.40%floating-point operations(FLOPs)reduction.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62105004 and 52174141)the College Student Innovation and Entrepreneurship Fund Project(Grant No.202210361053)+4 种基金Anhui Mining Machinery and Electrical Equipment Coordination Innovation Center,Anhui University of Science&Technology(Grant No.KSJD202304)the Anhui Province Digital Agricultural Engineering Technology Research Center Open Project(Grant No.AHSZNYGC-ZXKF021)the Talent Recruitment Special Fund of Anhui University of Science and Technology(Grant No.2024yjrc175)the Graduate Innovation Fund Project of Anhui University of Science and Technology(Grant Nos.2024cx2067,2024cx2107,and 2024cx2064)Seed Support Project for Postgraduate Innovation,Entrepreneurship and Practice at Anhui University of Science and Technology(Grant No.2024cxcysj084).
文摘With the development of the Internet,image encryption technology has become critical for network security.Traditional methods often suffer from issues such as insufficient chaos,low randomness in key generation,and poor encryption efficiency.To enhance performance,this paper proposes a new encryption algorithm designed to optimize parallel processing and adapt to images of varying sizes and colors.The method begins by using SHA-384 to extract the hash value of the plaintext image,which is then processed to determine the chaotic system’s initial value and block size.The image is padded and divided into blocks for further processing.A novel two-dimensional infinite collapses hyperchaotic map(2DICHM)is employed to generate the intra-block scrambling sequence,while an improved variable Joseph traversal sequence is used for inter-block scrambling.After removing the padding,3D forward and backward shift diffusions,controlled by the 2D-ICHM sequences,are applied to the scrambled image,producing the ciphertext.Simulation results demonstrate that the proposed algorithm outperforms others in terms of entropy,anti-noise resilience,correlation coefficient,robustness,and encryption efficiency.
基金The National Natural Science Foundation of China(No.61070170)the Natural Science Foundation of Higher Education Institutions of Jiangsu Province(No.11KJB520017)Suzhou Application Foundation Research Project(No.SYG201238)
文摘Aiming at the problem that only some types of SPARQL （ simple protocal and resource description framework query language） queries can be answered by using the current resource description framework link traversal based query execution （RDF-LTE） approach, this paper discusses how the execution order of the triple pattern affects the query results and cost based on concrete SPARQL queries, and analyzes two properties of the web of linked data, missing backward links and missing contingency solution. Then three heuristic principles for logic query plan optimization, namely, the filtered basic graph pattern （FBGP） principle, the triple pattern chain principle and the seed URIs principle, are proposed. The three principles contribute to decrease the intermediate solutions and increase the types of queries that can be answered. The effectiveness and feasibility of the proposed approach is evaluated. The experimental results show that more query results can be returned with less cost, thus enabling users to develop the full potential of the web of linked data.
文摘An attempt has been made with overlaying of stain-less steel on mild steel by the technique of friction surfacing. This investigation elaborates the excellence acquired by different combination of the process parameters used in friction surfacing specifically traverse speed of the cross slide, speed of rotation of the spindle and the uniaxial compressive load. Excellent overlaying has been obtained amongst the chosen materials. To which, the coating can be done with various set of process parameters. It has been observed that the bond strength of the coating was found to be at a maximum of 502 MPa by ram tensile test.Based upon this results the surface methodology was characterized with scanning electron microscope.For authenticating the results, the coated specimen was subjected to salt spray test. The bonding microstructure was characterized using optical microscopy and X-ray diffraction. Corrosion resistance of surfaced coatings was found to be more inferior to that of mechtrode material and greater with the substrate.
