The transient absorption spectra and kinetics of excited triplet state of anthraquinone derivatives 2-anthraquinonesulfonatesodium (AQS) and 2-deoxythymidine (dT) have been investigated in CH3CN-H2O (97:3) using the t...The transient absorption spectra and kinetics of excited triplet state of anthraquinone derivatives 2-anthraquinonesulfonatesodium (AQS) and 2-deoxythymidine (dT) have been investigated in CH3CN-H2O (97:3) using the time-resolved laser flash photolysis technique (KrF, 248 nm). The absorption spectra of dT radical cation and the radical anion of AQS have been observed. From dynamic and thermodyrnamic analysis, the mechanism of this transient reaction has been initially analysed.展开更多
The interfacial reactions in partial transient liquid-phase bonding of Si3N4 ceramics with Ti/Ni/Ti interlayers were studied by means of scanning electron microscopy （SEM）, energy dispersive spectrometry （EDS） and...The interfacial reactions in partial transient liquid-phase bonding of Si3N4 ceramics with Ti/Ni/Ti interlayers were studied by means of scanning electron microscopy （SEM）, energy dispersive spectrometry （EDS） and X-ray diffractometry （XRD）. It was shown that the interfacial structure of Si3N4/TiN/Ti5Si3+Ti5Si4 + Ni3Si/ （NiTi ） /Ni3Ti/ Ni was formed after bonding. The activation energies for TiN layer and the mixed reaction layer of Ti5Si3 + Ti5Si4 + Ni3Si are 546. 8 kJ/mol and 543. 9 kJ/mol, respectively. The formation and transition processes of interface layer sequence in the joint were clarified by diffusion path. An important characteristic, which is different from the conventional brazing and soid-state diffusion bonding, has been found, i. e., during the partial transient liquid-phase bonding, not only the reaction layers which have formed grow, but also the diffusion path in the subsequent reaction changes because of the remarkable variation of the concentration on the metal side.展开更多
The reaction mechanism of 3 chlorophenol with OH, H in aqueous solution was studied by transient technology. The 3 chlorophenol aqueous solutions have been saturated with air or N 2 previously. Under alkaline condi...The reaction mechanism of 3 chlorophenol with OH, H in aqueous solution was studied by transient technology. The 3 chlorophenol aqueous solutions have been saturated with air or N 2 previously. Under alkaline condition, the reaction of OH radical with 3 chlorophenol produces 3 chlorinated phenoxyl radical, with the absorption peaks at 400 nm and 417 nm. Under neutral condition, the reaction of OH radical with 3 chlorophenol produces OH adduct with the maximal absorption at about 340 nm. And in acid solution, the reaction of H with 3 chlorophenol produces H adduct with the maximal absorption at about 320 nm. 3 chlorophenol is compared with 4 and 2 chlorophenols from the free radical pathways. The results show that the positions of chlorine on the aromatic ring strongly influence the dehalogenation and degradation process.展开更多
By combining results of transient response tests with forced concentration oscillation experi-ments,behaviors of benzene oxidation over V<sub>2</sub>O<sub>5</sub> catalysts has been determined....By combining results of transient response tests with forced concentration oscillation experi-ments,behaviors of benzene oxidation over V<sub>2</sub>O<sub>5</sub> catalysts has been determined.Product increse canbe observed during periodic operation.The mechanism of catalytic reaction can be elucidated andthe behavior of concentration oscillation during the reaction is determined.The relation betweencycling frequency and response characteristics has also been studied with two different types of peri-odic operation,i.e.,regular and irregular square waves.展开更多
Dynamics in partial transient liquid phase bonding (PTLP bonding) of Si_3N_4 ceramic with Ti/Cu/Ti multi-interlayer was systematically studied through micro-analysis of joint interfaces. The results show that growth o...Dynamics in partial transient liquid phase bonding (PTLP bonding) of Si_3N_4 ceramic with Ti/Cu/Ti multi-interlayer was systematically studied through micro-analysis of joint interfaces. The results show that growth of reaction layer and isothermal solidification procession do at the same time. Growth of reaction layer and moving of isothermal solidification interface obey the parabolic law governed by the diffusion of participating elements during the PTLP bonding. Coordination of the above two dynamics process is done through time and temperature. When reaction layer thickness is suitable and isothermal solidification process is finished, the high bonding strength at room temperature and high temperature are obtained.展开更多
文摘The transient absorption spectra and kinetics of excited triplet state of anthraquinone derivatives 2-anthraquinonesulfonatesodium (AQS) and 2-deoxythymidine (dT) have been investigated in CH3CN-H2O (97:3) using the time-resolved laser flash photolysis technique (KrF, 248 nm). The absorption spectra of dT radical cation and the radical anion of AQS have been observed. From dynamic and thermodyrnamic analysis, the mechanism of this transient reaction has been initially analysed.
文摘The interfacial reactions in partial transient liquid-phase bonding of Si3N4 ceramics with Ti/Ni/Ti interlayers were studied by means of scanning electron microscopy （SEM）, energy dispersive spectrometry （EDS） and X-ray diffractometry （XRD）. It was shown that the interfacial structure of Si3N4/TiN/Ti5Si3+Ti5Si4 + Ni3Si/ （NiTi ） /Ni3Ti/ Ni was formed after bonding. The activation energies for TiN layer and the mixed reaction layer of Ti5Si3 + Ti5Si4 + Ni3Si are 546. 8 kJ/mol and 543. 9 kJ/mol, respectively. The formation and transition processes of interface layer sequence in the joint were clarified by diffusion path. An important characteristic, which is different from the conventional brazing and soid-state diffusion bonding, has been found, i. e., during the partial transient liquid-phase bonding, not only the reaction layers which have formed grow, but also the diffusion path in the subsequent reaction changes because of the remarkable variation of the concentration on the metal side.
文摘The reaction mechanism of 3 chlorophenol with OH, H in aqueous solution was studied by transient technology. The 3 chlorophenol aqueous solutions have been saturated with air or N 2 previously. Under alkaline condition, the reaction of OH radical with 3 chlorophenol produces 3 chlorinated phenoxyl radical, with the absorption peaks at 400 nm and 417 nm. Under neutral condition, the reaction of OH radical with 3 chlorophenol produces OH adduct with the maximal absorption at about 340 nm. And in acid solution, the reaction of H with 3 chlorophenol produces H adduct with the maximal absorption at about 320 nm. 3 chlorophenol is compared with 4 and 2 chlorophenols from the free radical pathways. The results show that the positions of chlorine on the aromatic ring strongly influence the dehalogenation and degradation process.
文摘By combining results of transient response tests with forced concentration oscillation experi-ments,behaviors of benzene oxidation over V<sub>2</sub>O<sub>5</sub> catalysts has been determined.Product increse canbe observed during periodic operation.The mechanism of catalytic reaction can be elucidated andthe behavior of concentration oscillation during the reaction is determined.The relation betweencycling frequency and response characteristics has also been studied with two different types of peri-odic operation,i.e.,regular and irregular square waves.
文摘Dynamics in partial transient liquid phase bonding (PTLP bonding) of Si_3N_4 ceramic with Ti/Cu/Ti multi-interlayer was systematically studied through micro-analysis of joint interfaces. The results show that growth of reaction layer and isothermal solidification procession do at the same time. Growth of reaction layer and moving of isothermal solidification interface obey the parabolic law governed by the diffusion of participating elements during the PTLP bonding. Coordination of the above two dynamics process is done through time and temperature. When reaction layer thickness is suitable and isothermal solidification process is finished, the high bonding strength at room temperature and high temperature are obtained.
