Current research on rail vehicle system vibrations primarily relies on numerical methods,with vibration transfer functions commonly derived through data fitting.However,the physical mechanisms underlying these vibrati...Current research on rail vehicle system vibrations primarily relies on numerical methods,with vibration transfer functions commonly derived through data fitting.However,the physical mechanisms underlying these vibrations are not well understood.To clarify the vibration transfer function and its characteristics,four basic input vectors are defined,and an analytical method is proposed.The vibration transfer functions of the vehicle system are solved,and their spatial coherence is analyzed.The results show that there are two spatial scales and four coherent modes in the vehicle system.The track irregularity wavelengths are combined with two spatial scales to alter the proportions of basic input vectors and then show the characteristics of spatial coherence.Four coherent modes are involved in wheel-rail force and primary suspension force;two coherent modes are involved in bogie vertical motion;and their dominant modes vary with the input frequency.On the other hand,the coherent modes involved in the bogie pitching motion and vehicle body motion are single and fixed over the whole range of frequency.This study presents an analytical method for the rapid solution of dynamic responses in vehicle systems and systematically analyzes the coherence behavior of vibration transfer functions with respect to tracking irregularity wavelengths.展开更多
Traditional centralized Proportional Integral(PI)controller design methods based on Equivalent Transfer Functions(ETFs)have poor decoupling effect in turboprop engines.In this paper,a centralized PI design method base...Traditional centralized Proportional Integral(PI)controller design methods based on Equivalent Transfer Functions(ETFs)have poor decoupling effect in turboprop engines.In this paper,a centralized PI design method based on dynamic imaginary matrix and equivalent transfer function is proposed.Firstly,a method for solving equivalent transfer functions based on the dynamic imaginary matrix is proposed,which adopts dynamic imaginary matrix to describe the dynamic characteristics of the system,and obtains the equivalent transfer function based on the dynamic imaginary matrix characteristics.Secondly,for the equivalent transfer function,a central-ized PI control gain is designed using the Taylor expansion method.Meanwhile,this paper further proves that the centralized PI design method proposed in this paper has integral stability.Consid-ering the impact of altitude and Mach number on turboprop engines,a linear feedforward control method based on the transfer function matrix is further proposed based on the centralized PI con-troller,and the stability of the entire comprehensive control method is proved.Finally,to ensure the safe and effective operation of the turboprop engine,a temperature and torque limiting protection controller is designed for the turboprop engine.Simulation results show that the centralized PI con-troller design method and linear feedforward control method proposed can effectively improve the control quality of turboprop engine control systems.展开更多
AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anteri...AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anterior corneal surface in myopes. METHODS: Four hundred eyes from 200 patients were examined under SIRIUS corneal topography system. Phoenis analysis software was applied to simulate the MTF curves of anterior corneal surface at vertical and horizontal meridians at the 3, 4, 5, 6, 7mm optical zones of cornea. The MTF values at spatial frequencies of 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and 60 cycles/degree (c/d) were selected. RESULTS: The MTF curve of anterior corneal surface decreased rapidly from low to intermediate frequency (0-15cpd) at various optical zones of cornea, the value decreased to 0 slowly at higher frequency (>15cpd). With the increase of the optical zones of cornea, MTF curve decreased gradually. 3) In the range of 3 mm- 6 mm optical zones of the cornea, the MTF values measured at horizontal meridian were greater than the corresponding values at horizontal meridian of each spatial frequency, the difference was statistically significant (P<0.05). At 7 mm optical zones of cornea, the MTF values measured at horizontal meridian were less than the corresponding values at vertical meridian at 10-60 spatial frequencies (cpd), and the difference was statistically significant in 25, 30, 35, 40, 45, 50 cpd(P<0.05). CONCLUSION: MTF can be used to describe the imaging quality of optical systems at anterior corneal surface objectively in detail.展开更多
The atmospheric scattering optical transfer function （OTF） is solved by applying the multi-coupled single scattering （MCSS） method to the three-dimensional radiative transfer equation （RTE） under the periodic gr...The atmospheric scattering optical transfer function （OTF） is solved by applying the multi-coupled single scattering （MCSS） method to the three-dimensional radiative transfer equation （RTE） under the periodic ground condition. This approach is a direct hit to the atmospheric scattering OTF using the same original context of modulation transfer function （MTF） measurement, i.e., images of sinusoidal grating at different spatial frequencies. Both the amplitude and phase shift of the OTF at various zenith and azimuth angles can be obtained at an arbitrary spatial frequency.展开更多
Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous co...Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode（CCM） operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.展开更多
Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most o...Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most of which are based on the global rock bolt response evaluated in pull-out tests.This paper presents a laboratory experimental setup aiming to capture the rock formation effect,while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level.It is shown that the behavior along the sample itself varies,with certain points exhibiting stress drops with crack formation.Some edge effects related to the kinematic freedom of the grout to dilate are also observed.Regardless,it was found that the mid-level response is quite similar to the average response along the sample.The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations.The paper also offers a plasticity-based hardening load transfer function,representing a"slice"of the anchor.The paper describes in detail the development of the model and the calibration/determination of its parameters.The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.展开更多
The resolution characteristic can be obtained by the modulation transfer function （MTF） of a GaAs/GaA1As photocathode. After establishing the theoretical model of GaAs（100）-oriented atomic configuration and the fo...The resolution characteristic can be obtained by the modulation transfer function （MTF） of a GaAs/GaA1As photocathode. After establishing the theoretical model of GaAs（100）-oriented atomic configuration and the formula for the ionized impurity scattering of the non-equilibrium carriers, this paper calculates the trajectories of photoelectrons in a photocathode. Thus the distribution of photoelectron spots on the emit-face is obtained, which is namely the point spread function. The MTF is obtained by Fourier transfer of the line spread function obtained from the point spread function. The MTF obtained from these calculations is shown to depend heavily on the electron diffusion length, and enhanced considerably by decreasing the electron diffusion length and increasing the doping concentration. Furthermore, the resolution is enhanced considerably by increasing the active-layer thickness, especially at high spatial frequencies. The best spatial resolution is 860 lp/mm, for the GaAs photocathode of doping concentration 1 ×10^19 cm 3 electron diffusion length 3.6 μm and the active-layer thickness 2 μm, under the 633-nm light irradiated. This research will contribute to the future improvement of the cathode＇s resolution for preparing a high performance GaAs photocathode, and improve the resolution of a low light level image intensifier.展开更多
A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy ...A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides, PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.展开更多
Vibrations impose negative impacts on the effectiveness and public acceptance of helicopters.Active rotors with trailing-edge flaps have been proved to be an effective way to actively eliminate helicopter vibrations.F...Vibrations impose negative impacts on the effectiveness and public acceptance of helicopters.Active rotors with trailing-edge flaps have been proved to be an effective way to actively eliminate helicopter vibrations.For the existing control algorithm based on offline system identification,the transfer functions of an active rotor under different flight conditions are pre-requisites to implement closed-loop vibration control.In this study,a three-bladed active rotor with improved trailing-edge flaps is designed,and wind-tunnel tests are conducted to identify the transfer functions of this active rotor using frequency sweep and phase sweep methods.The experimental results demonstrate that these transfer functions are insensitive to the variation of flight speeds:the amplitude of the transfer function varies slightly,while the phase delay almost remains unchanged.In addition,this finding is validated through closed-loop vibration control tests with the active rotor.The transfer function obtained from the hover test results is also applicable to closed-loop vibration control tests under the forward flight conditions.This will dramatically simplify the implementation and operation of an active rotor.展开更多
To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points i...To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points in 27 lakes,based on which Canonical Correspondence Analysis(CCA)was conducted.The result show that planktonic diatoms displayed certain responses to environment gradients,and the total phosphorus(TP)explained the maximum variation of planktonic diatom species among the 15 environmental variables,suggesting that TP was the most important and significant environmental parameter affecting the distribution of diatom species.In addition,we established a diatom-total phosphorus transfer(DTPT)function,of which component 5 of the weighted averaging partial least squares regression(WAPLS)was chosen to and compared with a series of weighted average regression(WA)models and WA-PLS models.According to the jackknifing statistical test,the component 5 of WA-PLS models provided a lower root-mean-square error prediction(RMSEP=0.202)and a higher correlation coefficient between observation and prediction(R^2_Jack=0.759).After deletion of three outliers,the root-mean-square error prediction of the DTPT function was reduced(RMSEP=0.169)while the correlation coefficient between observation and prediction was increased(R^2_Jack=0.823).Therefore,this DTPT function performed better than other regional TP models in the world.However,it remains demanding for expanding the background dataset to improve the prediction ability of the model.展开更多
The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth's crust. Many observations have verified that groundwater is an ideal info...The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth's crust. Many observations have verified that groundwater is an ideal information carrier of the crust. In this paper, the series of input (precipitation, air pressure, Earth tide etc.) and output (water level, artesian flow) of the deep aqueous system are studied by using the spectrum analysis and system theory. The application concepts of transfer function and the spectral structure of the hydrograph enrich the knowledge of the deep aqueous system. Two typical spectral structures of the hydrograph of the deep aqueous system are obtained by comparing with many water-bearing systems of the Jizhong depression. One is from well Ma-17 and the other is from the well Xinze-5. Finally, the physical models of forming the spectrum of the hydrograph are constructed on the basis of the spectrum research on the deep aqueous system.展开更多
The galvanic coupling intra-body communication （IBC） was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameter...The galvanic coupling intra-body communication （IBC） was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters were discussed. Secondly, the transfer function of the galvanic coupling IBC was derived and proposed. Finally, the signal attenuation characteristics of the galvanic coupling IBC were measured along different signal transmission paths of actual human bodies, while the corresponding mathematical simulations based on the proposed transfer function were carried out. Our investigation showed that the mathematical simulation results coincided with the measured results over the frequency range of 100kHz to 5MHz, which indicated that the proposed transfer function could be useful for theoretical analysis and application of the galvanic coupling IBC.展开更多
Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located...Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located in the upper sheet is modeled as two nonlocal Kirchhoff plates connected by van der Waals forces. The Galerkin strip transfer function method which is a semi-analytical method is developed to compute the natural frequencies of the mass- plate vibrating system. It can give exact closed-form solutions along the longitudinal direction of the strip. The results obtained from the semi-analytical method are compared with the previous ones, and the differences between the single-layered graphene sheet （SLGS） and the DLGS mass sensors are also investigated. The results demonstrate the similarity of the in-phase mode between the SLGS and DLGS mass sensors. The sensitivity of the DLGS mass sensor can be increased by decreasing the nonlocal parameter, moving the attached nanoparticle closer to the DLGS center and making the DLGS smaller. These conclusions are helpful for the design and application of graphene-sheet-based resonators as nano-mass sensors.展开更多
An optical transfer function （OTF） reconstruction model is first embedded into incoherent Fourier ptychography （IFP）. The leading result is a proposed algorithm that can recover both the super-resolution image and...An optical transfer function （OTF） reconstruction model is first embedded into incoherent Fourier ptychography （IFP）. The leading result is a proposed algorithm that can recover both the super-resolution image and the OTF of an imaging system with unknown aberrations simultaneously. This model overcomes the difficult problem of OTF estimation that the previous IFP faces. The effectiveness of this algorithm is demonstrated by numerical simulations, and the superior reconstruction is presented. We believe that the reported algorithm can extend the original IFP for more complex conditions and may provide a solution by using structured light for characterization of optical systems＇ aberrations.展开更多
Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineerin...Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineering situations as it identifies the frequency of waves which will be favourably transmitted.Two different numerical methods are used for this study,adopting the finite difference method and the combined discrete element-finite difference method.The numerical models are validated by replicating results from previous studies.The two methods are found to behave similarly and show the same resonance effects;one operating at low frequency and the other operating at relatively high frequency.These resonance effects are interpreted in terms of simple physical systems and analytical equations are derived to predict the resonant frequencies of complex rock masses.Low frequency resonance is shown to be generated by a system synonymous with masses between springs,described as spring resonance,with an equal number of resonant frequencies as the number of blocks.High frequency resonance is generated through superposition of multiple reflected waves developing standing waves within intact blocks,described as superposition resonance.While resonance through superposition has previously been identified,resonance based on masses between springs has not been previously identified in jointed rocks.The findings of this study have implications for future analysis of multiple jointed rock masses,showing that a wave travelling through such materials can induce other modes of propagation of waves,i.e.spring resonance.展开更多
When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic...When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic, and shadowing modulations. A conventional linear MTF was derived using HH-polarized radar observations under conditions of deep water. In this study, we propose a new quadratic polynomial MTF based on W-polarized radar measurements taken from heterogeneous nearshore wave fields. This new MTF is obtained using a radar-observed image spectrum and in situ buoy-measured wave frequency spectrum. We validate the MTF by comparing peak and mean wave periods retrieved from X-band marine radar image sequences with those measured by the buoy. It is shown that the retrieval accuracies of peak and mean wave periods of the new MTF are better than the conventional MTF. The results also show that the bias and root mean square errors of the peak and mean wave periods of the new MTF are 0.05 and 0.88 s, and 0.32 and 0.53 s, respectively, while those of the conventional MTF are 0.61 and 0.98 s, and 1.39 and 1.48 s, respectively. Moreover, it is also shown that the retrieval results are insensitive to the coefficients in the proposed MTF.展开更多
A new interpolation algorithm for Head-Related Transfer Function （HRTF） is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical ha...A new interpolation algorithm for Head-Related Transfer Function （HRTF） is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical harmonics on a spherical surface. Truncated Singular Value Decomposition （SVD） is adopted to calculate the weights of the model. The truncation number is chosen according to Frobenius norm ratio and the partial condition number. Compared with other interpolated methods, our proposed approach not only is continuous but exploits global information of available directions. The HRTF from any desired direction can be and interpolated results demonstrate that our obtained more accurately and robustly. Reconstructed proposed algorithm acquired better performance.展开更多
Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer functions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part ...Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer functions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part has been given. The influences of source field period, the conductivity, the buried depth and the length of the conductor on the transfer functions were studied. The extrema of transfer functions appear at the center, the four corners and around the edges of conductor, and move with the edges. This feature demonstrates that around the edges are best places for transfer functions' observation.展开更多
FBS-3A feedback broadband seismometer has been widely utilized in observation networks up to now. Therefore, it is very important and practically meaningful for the application of this kind of sensor to fulfill some r...FBS-3A feedback broadband seismometer has been widely utilized in observation networks up to now. Therefore, it is very important and practically meaningful for the application of this kind of sensor to fulfill some relative research work about its transfer function and for the analysis to the data recorded and the further development of the seismometer. In this paper, from the viewpoint of achieving its working principle, method of systematic analysis is applied to deduce the transfer functions, including both the transfer function for calibration and that for measurement. Moreover, on the basis of that, the distribution of its zeroes and poles in a complex frequency domain is analyzed, which provides a convincing evidence to simplify this seismometer system from a high-order one to a two-order one. And the emulation of the frequency characteristics of FBS-3A is presented in this paper. On the whole, the aim of this article is to do some theoretical work about the earthquake observation sensor, and also to introduce the method of making systematic analysis in a complex frequency domain to the research and the development of the seismometers.展开更多
基金Supported by Fundamental Research Funds for the Central Universities(Grant No.2024QYBS031)Fundamental Research Funds for the Central Universities(Grant No.2022JBQY007)。
文摘Current research on rail vehicle system vibrations primarily relies on numerical methods,with vibration transfer functions commonly derived through data fitting.However,the physical mechanisms underlying these vibrations are not well understood.To clarify the vibration transfer function and its characteristics,four basic input vectors are defined,and an analytical method is proposed.The vibration transfer functions of the vehicle system are solved,and their spatial coherence is analyzed.The results show that there are two spatial scales and four coherent modes in the vehicle system.The track irregularity wavelengths are combined with two spatial scales to alter the proportions of basic input vectors and then show the characteristics of spatial coherence.Four coherent modes are involved in wheel-rail force and primary suspension force;two coherent modes are involved in bogie vertical motion;and their dominant modes vary with the input frequency.On the other hand,the coherent modes involved in the bogie pitching motion and vehicle body motion are single and fixed over the whole range of frequency.This study presents an analytical method for the rapid solution of dynamic responses in vehicle systems and systematically analyzes the coherence behavior of vibration transfer functions with respect to tracking irregularity wavelengths.
基金support by the National Natural Science Foundation of China (No.52202474)China Postdoctoral Science Foundation (No.2023M731655)+3 种基金Major Projects of National Science and Technology,China (No.J2019-I-0020-0019)Advanced Aviation Power Innovation Workstation Project,China (No.HKCX2022-01-026-03)Basic Research Business Fees for Central Universities,China (No.NT2023004)Nanjing University of Aeronautics and Astronautics Forward-looking Layout Research Project,China (No.1002-ILA22037-1A22).
文摘Traditional centralized Proportional Integral(PI)controller design methods based on Equivalent Transfer Functions(ETFs)have poor decoupling effect in turboprop engines.In this paper,a centralized PI design method based on dynamic imaginary matrix and equivalent transfer function is proposed.Firstly,a method for solving equivalent transfer functions based on the dynamic imaginary matrix is proposed,which adopts dynamic imaginary matrix to describe the dynamic characteristics of the system,and obtains the equivalent transfer function based on the dynamic imaginary matrix characteristics.Secondly,for the equivalent transfer function,a central-ized PI control gain is designed using the Taylor expansion method.Meanwhile,this paper further proves that the centralized PI design method proposed in this paper has integral stability.Consid-ering the impact of altitude and Mach number on turboprop engines,a linear feedforward control method based on the transfer function matrix is further proposed based on the centralized PI con-troller,and the stability of the entire comprehensive control method is proved.Finally,to ensure the safe and effective operation of the turboprop engine,a temperature and torque limiting protection controller is designed for the turboprop engine.Simulation results show that the centralized PI con-troller design method and linear feedforward control method proposed can effectively improve the control quality of turboprop engine control systems.
文摘AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anterior corneal surface in myopes. METHODS: Four hundred eyes from 200 patients were examined under SIRIUS corneal topography system. Phoenis analysis software was applied to simulate the MTF curves of anterior corneal surface at vertical and horizontal meridians at the 3, 4, 5, 6, 7mm optical zones of cornea. The MTF values at spatial frequencies of 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and 60 cycles/degree (c/d) were selected. RESULTS: The MTF curve of anterior corneal surface decreased rapidly from low to intermediate frequency (0-15cpd) at various optical zones of cornea, the value decreased to 0 slowly at higher frequency (>15cpd). With the increase of the optical zones of cornea, MTF curve decreased gradually. 3) In the range of 3 mm- 6 mm optical zones of the cornea, the MTF values measured at horizontal meridian were greater than the corresponding values at horizontal meridian of each spatial frequency, the difference was statistically significant (P<0.05). At 7 mm optical zones of cornea, the MTF values measured at horizontal meridian were less than the corresponding values at vertical meridian at 10-60 spatial frequencies (cpd), and the difference was statistically significant in 25, 30, 35, 40, 45, 50 cpd(P<0.05). CONCLUSION: MTF can be used to describe the imaging quality of optical systems at anterior corneal surface objectively in detail.
基金supported by the Main Direction Program of Knowledge Innovation of Chinese Academy of Sciences(Grant No.KGFZD-125-13-006)
文摘The atmospheric scattering optical transfer function （OTF） is solved by applying the multi-coupled single scattering （MCSS） method to the three-dimensional radiative transfer equation （RTE） under the periodic ground condition. This approach is a direct hit to the atmospheric scattering OTF using the same original context of modulation transfer function （MTF） measurement, i.e., images of sinusoidal grating at different spatial frequencies. Both the amplitude and phase shift of the OTF at various zenith and azimuth angles can be obtained at an arbitrary spatial frequency.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51007068)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20100201120028)+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2012JQ7026)the Fundamental Research Funds for the Central Universities of China (Grant No. 2012jdgz09)the State Key Laboratory of Electrical Insulation and Power Equipment of China (Grant No. EIPE12303)
文摘Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode（CCM） operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.
基金funding support from the Israeli Ministry of Housing and Construction(Grant No.2028286).
文摘Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most of which are based on the global rock bolt response evaluated in pull-out tests.This paper presents a laboratory experimental setup aiming to capture the rock formation effect,while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level.It is shown that the behavior along the sample itself varies,with certain points exhibiting stress drops with crack formation.Some edge effects related to the kinematic freedom of the grout to dilate are also observed.Regardless,it was found that the mid-level response is quite similar to the average response along the sample.The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations.The paper also offers a plasticity-based hardening load transfer function,representing a"slice"of the anchor.The paper describes in detail the development of the model and the calibration/determination of its parameters.The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60678043)the Research and Innovation Plan for Graduate Students of Jiangsu Higher Education Institutions,China (Grant No. CX09B 096Z)
文摘The resolution characteristic can be obtained by the modulation transfer function （MTF） of a GaAs/GaA1As photocathode. After establishing the theoretical model of GaAs（100）-oriented atomic configuration and the formula for the ionized impurity scattering of the non-equilibrium carriers, this paper calculates the trajectories of photoelectrons in a photocathode. Thus the distribution of photoelectron spots on the emit-face is obtained, which is namely the point spread function. The MTF is obtained by Fourier transfer of the line spread function obtained from the point spread function. The MTF obtained from these calculations is shown to depend heavily on the electron diffusion length, and enhanced considerably by decreasing the electron diffusion length and increasing the doping concentration. Furthermore, the resolution is enhanced considerably by increasing the active-layer thickness, especially at high spatial frequencies. The best spatial resolution is 860 lp/mm, for the GaAs photocathode of doping concentration 1 ×10^19 cm 3 electron diffusion length 3.6 μm and the active-layer thickness 2 μm, under the 633-nm light irradiated. This research will contribute to the future improvement of the cathode＇s resolution for preparing a high performance GaAs photocathode, and improve the resolution of a low light level image intensifier.
基金This work was supported by the National Natural Science Foundation of China (No. 50007004)
文摘A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides, PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.
基金co-supported by the National Natural Science Foundation of China(No.11402110)a project funded by the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions,China。
文摘Vibrations impose negative impacts on the effectiveness and public acceptance of helicopters.Active rotors with trailing-edge flaps have been proved to be an effective way to actively eliminate helicopter vibrations.For the existing control algorithm based on offline system identification,the transfer functions of an active rotor under different flight conditions are pre-requisites to implement closed-loop vibration control.In this study,a three-bladed active rotor with improved trailing-edge flaps is designed,and wind-tunnel tests are conducted to identify the transfer functions of this active rotor using frequency sweep and phase sweep methods.The experimental results demonstrate that these transfer functions are insensitive to the variation of flight speeds:the amplitude of the transfer function varies slightly,while the phase delay almost remains unchanged.In addition,this finding is validated through closed-loop vibration control tests with the active rotor.The transfer function obtained from the hover test results is also applicable to closed-loop vibration control tests under the forward flight conditions.This will dramatically simplify the implementation and operation of an active rotor.
基金Supported by the National Natural Science Foundation of China(Nos.41571199,41030743,31870187)。
文摘To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points in 27 lakes,based on which Canonical Correspondence Analysis(CCA)was conducted.The result show that planktonic diatoms displayed certain responses to environment gradients,and the total phosphorus(TP)explained the maximum variation of planktonic diatom species among the 15 environmental variables,suggesting that TP was the most important and significant environmental parameter affecting the distribution of diatom species.In addition,we established a diatom-total phosphorus transfer(DTPT)function,of which component 5 of the weighted averaging partial least squares regression(WAPLS)was chosen to and compared with a series of weighted average regression(WA)models and WA-PLS models.According to the jackknifing statistical test,the component 5 of WA-PLS models provided a lower root-mean-square error prediction(RMSEP=0.202)and a higher correlation coefficient between observation and prediction(R^2_Jack=0.759).After deletion of three outliers,the root-mean-square error prediction of the DTPT function was reduced(RMSEP=0.169)while the correlation coefficient between observation and prediction was increased(R^2_Jack=0.823).Therefore,this DTPT function performed better than other regional TP models in the world.However,it remains demanding for expanding the background dataset to improve the prediction ability of the model.
基金Project was support by National Natural Science Foundation of China.
文摘The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth's crust. Many observations have verified that groundwater is an ideal information carrier of the crust. In this paper, the series of input (precipitation, air pressure, Earth tide etc.) and output (water level, artesian flow) of the deep aqueous system are studied by using the spectrum analysis and system theory. The application concepts of transfer function and the spectral structure of the hydrograph enrich the knowledge of the deep aqueous system. Two typical spectral structures of the hydrograph of the deep aqueous system are obtained by comparing with many water-bearing systems of the Jizhong depression. One is from well Ma-17 and the other is from the well Xinze-5. Finally, the physical models of forming the spectrum of the hydrograph are constructed on the basis of the spectrum research on the deep aqueous system.
基金Supported by the National Natural Science Foundation of China(60801050)the Basic Research Foundation of Beijing Institute of Technology(1010050320804)
文摘The galvanic coupling intra-body communication （IBC） was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters were discussed. Secondly, the transfer function of the galvanic coupling IBC was derived and proposed. Finally, the signal attenuation characteristics of the galvanic coupling IBC were measured along different signal transmission paths of actual human bodies, while the corresponding mathematical simulations based on the proposed transfer function were carried out. Our investigation showed that the mathematical simulation results coincided with the measured results over the frequency range of 100kHz to 5MHz, which indicated that the proposed transfer function could be useful for theoretical analysis and application of the galvanic coupling IBC.
基金supported by the National Natural Science Foundation of China(Grant No.11302254)
文摘Double-layered graphene sheets （DLGSs） can be applied to the development of a new generation of nanomechanical sensors due to their unique physical properties. A rectangular DLGS with a nanoparticle randomly located in the upper sheet is modeled as two nonlocal Kirchhoff plates connected by van der Waals forces. The Galerkin strip transfer function method which is a semi-analytical method is developed to compute the natural frequencies of the mass- plate vibrating system. It can give exact closed-form solutions along the longitudinal direction of the strip. The results obtained from the semi-analytical method are compared with the previous ones, and the differences between the single-layered graphene sheet （SLGS） and the DLGS mass sensors are also investigated. The results demonstrate the similarity of the in-phase mode between the SLGS and DLGS mass sensors. The sensitivity of the DLGS mass sensor can be increased by decreasing the nonlocal parameter, moving the attached nanoparticle closer to the DLGS center and making the DLGS smaller. These conclusions are helpful for the design and application of graphene-sheet-based resonators as nano-mass sensors.
基金Supported by the National Natural Science Foundation of China under Grant No 61205144the Research Project of National University of Defense Technology under Grant No JC13-07-01the Key Laboratory of High Power Laser and Physics of Chinese Academy of Sciences
文摘An optical transfer function （OTF） reconstruction model is first embedded into incoherent Fourier ptychography （IFP）. The leading result is a proposed algorithm that can recover both the super-resolution image and the OTF of an imaging system with unknown aberrations simultaneously. This model overcomes the difficult problem of OTF estimation that the previous IFP faces. The effectiveness of this algorithm is demonstrated by numerical simulations, and the superior reconstruction is presented. We believe that the reported algorithm can extend the original IFP for more complex conditions and may provide a solution by using structured light for characterization of optical systems＇ aberrations.
基金supported by the Engineering and Physical Sciences Research Council(EPSRC)(EP/R513258/1).
文摘Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineering situations as it identifies the frequency of waves which will be favourably transmitted.Two different numerical methods are used for this study,adopting the finite difference method and the combined discrete element-finite difference method.The numerical models are validated by replicating results from previous studies.The two methods are found to behave similarly and show the same resonance effects;one operating at low frequency and the other operating at relatively high frequency.These resonance effects are interpreted in terms of simple physical systems and analytical equations are derived to predict the resonant frequencies of complex rock masses.Low frequency resonance is shown to be generated by a system synonymous with masses between springs,described as spring resonance,with an equal number of resonant frequencies as the number of blocks.High frequency resonance is generated through superposition of multiple reflected waves developing standing waves within intact blocks,described as superposition resonance.While resonance through superposition has previously been identified,resonance based on masses between springs has not been previously identified in jointed rocks.The findings of this study have implications for future analysis of multiple jointed rock masses,showing that a wave travelling through such materials can induce other modes of propagation of waves,i.e.spring resonance.
基金Supported by the National High Technology Research and Development Program of China(863 Program)(No.2013AA09A505)the National Natural Science Foundation of China(Nos.41076119,41176160,41476158)+4 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Natural Science Youth Foundation of Jiangsu Province(No.BK2012467)the Natural Science State Key Foundation of Jiangsu Province(No.BK2011008)the National Natural Science Youth Foundation of China(No.41206171)the Startup Foundation for Introducing Talent of Nanjing University of Information Science and Technology(No.S8113078001)
文摘When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic, and shadowing modulations. A conventional linear MTF was derived using HH-polarized radar observations under conditions of deep water. In this study, we propose a new quadratic polynomial MTF based on W-polarized radar measurements taken from heterogeneous nearshore wave fields. This new MTF is obtained using a radar-observed image spectrum and in situ buoy-measured wave frequency spectrum. We validate the MTF by comparing peak and mean wave periods retrieved from X-band marine radar image sequences with those measured by the buoy. It is shown that the retrieval accuracies of peak and mean wave periods of the new MTF are better than the conventional MTF. The results also show that the bias and root mean square errors of the peak and mean wave periods of the new MTF are 0.05 and 0.88 s, and 0.32 and 0.53 s, respectively, while those of the conventional MTF are 0.61 and 0.98 s, and 1.39 and 1.48 s, respectively. Moreover, it is also shown that the retrieval results are insensitive to the coefficients in the proposed MTF.
基金Supported by Shanghai Natural Science Foundation, Shanghai Leading Academic Discipline Project, and STCSM of China (No. 08ZR1408300, S30108, and 08DZ2231100)
文摘A new interpolation algorithm for Head-Related Transfer Function （HRTF） is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical harmonics on a spherical surface. Truncated Singular Value Decomposition （SVD） is adopted to calculate the weights of the model. The truncation number is chosen according to Frobenius norm ratio and the partial condition number. Compared with other interpolated methods, our proposed approach not only is continuous but exploits global information of available directions. The HRTF from any desired direction can be and interpolated results demonstrate that our obtained more accurately and robustly. Reconstructed proposed algorithm acquired better performance.
文摘Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer functions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part has been given. The influences of source field period, the conductivity, the buried depth and the length of the conductor on the transfer functions were studied. The extrema of transfer functions appear at the center, the four corners and around the edges of conductor, and move with the edges. This feature demonstrates that around the edges are best places for transfer functions' observation.
文摘FBS-3A feedback broadband seismometer has been widely utilized in observation networks up to now. Therefore, it is very important and practically meaningful for the application of this kind of sensor to fulfill some relative research work about its transfer function and for the analysis to the data recorded and the further development of the seismometer. In this paper, from the viewpoint of achieving its working principle, method of systematic analysis is applied to deduce the transfer functions, including both the transfer function for calibration and that for measurement. Moreover, on the basis of that, the distribution of its zeroes and poles in a complex frequency domain is analyzed, which provides a convincing evidence to simplify this seismometer system from a high-order one to a two-order one. And the emulation of the frequency characteristics of FBS-3A is presented in this paper. On the whole, the aim of this article is to do some theoretical work about the earthquake observation sensor, and also to introduce the method of making systematic analysis in a complex frequency domain to the research and the development of the seismometers.
