Modern electric traction networks(ETN)are equipped with automated systems for commercial accounting of power consumption(ASCAPC),which allows solving properly the problems of enhancing the energy efficiency of transpo...Modern electric traction networks(ETN)are equipped with automated systems for commercial accounting of power consumption(ASCAPC),which allows solving properly the problems of enhancing the energy efficiency of transportation processes.Energy efficiency of ETNs is defined as the amount of power losses in ETN components:overhead catenary systems and traction transformers.Due to the instability of traction loads and changes in their location in space,the electric traction network is different from the general network.It is necessary to develop an approach for loss analysis in traction networks and in transformers of traction substations.To solve this prob-lem,a balance-based technique for power loss calculation in traction networks based on ASCAPC data is proposed.First,the balance-based technique presented here breaks down the power consumption of the train by source.Then,calculates technical power losses in 25 and 225 kV traction networks as well as in traction transformers.Last,the technique is implemented in the form of an algorithm tested on real-life data and it is ready for practical use.展开更多
Purpose–The traction cable is paralleled with the existing traction network of electrified railway through transverse connecting line to form the scheme of long distance power supply for the traction network.This pap...Purpose–The traction cable is paralleled with the existing traction network of electrified railway through transverse connecting line to form the scheme of long distance power supply for the traction network.This paper aims to study the scheme composition and power supply distance(PSD)of the scheme.Design/methodology/approach–Based on the structure of parallel traction network(referred to as“cable traction network(CTN)”),the power supply modes(PSMs)are divided into cableþdirect PSM and cableþautotransformer(AT)PSM(including Japanese mode,French mode and new mode).Taking cableþJapanese AT PSM as an example,the scheme of long distance power supply for CTN under the PSMs of co-phase and out-of-phase power supply are designed.On the basis of establishing the equivalent circuit model and the chain circuit model of CTN,taking the train working voltage as the constraint condition,and based on the power flow calculation of multiple train loads,the calculation formula and process for determining the PSD of CTN are given.The impedance and PSD of CTN under the cableþAT PSM are simulated and analyzed,and a certain line is taken as an example to compare the scheme design.Findings–Results show that the equivalent impedance of CTN under the cableþAT PSM is smaller,and the PSD is about 2.5 times of that under the AT PSM,which can effectively increase the PSD and the flexibility of external power supply location.Originality/value–The research content can effectively improve the PSD of traction power supply system and has important reference value for the engineering application of the scheme.展开更多
Introduction The mutual interference between surgical instruments in tho-racoscopic and laparoscopic surgery and the effective exposure of the surgical field are important factors affecting surgical op-erability[1].Ma...Introduction The mutual interference between surgical instruments in tho-racoscopic and laparoscopic surgery and the effective exposure of the surgical field are important factors affecting surgical op-erability[1].Magnetic anchoring and traction is one of the core techniques of magnetic surgery,which uses magnetic materials to generate force through indirect contact to achieve traction expo-sure of the target organs[2](Fig.1).展开更多
The autotransformer(AT)neutral current ratio method is widely used for fault location in the AT traction power network.With the development of high-speed electrified railways,a large number of data show that the relat...The autotransformer(AT)neutral current ratio method is widely used for fault location in the AT traction power network.With the development of high-speed electrified railways,a large number of data show that the relation between the AT neutral current ratio and the distance from the beginning of the fault AT section to the fault point(Q-L relation)is mostly nonlinear.Therefore,the linear Q-L relation in the traditional fault location method always leads to large errors.To solve this problem,a large number of load-related current data that can be used to describe the Q-L relation are obtained through the load test of the electric multiple unit(EMU).Thus,an improved fault location method based on the back propagation(BP)neural network is proposed in this paper.On this basis,a comparison between the improved method and the traditional method shows that the maximum absolute error and the average absolute error of the improved method are 0.651 km and 0.334 km lower than those of the traditional method,respectively,which demonstrates that the improved method can effectively eliminate the influence of nonlinear factors and greatly improve the accuracy of fault location for the AT traction power network.Finally,combined with a shortcircuit test,the accuracy of the improved method is verified.展开更多
To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the ...To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.展开更多
Various regulations, aimed at the protection of human beings and electrical equipment against possible adverse effects resulting from exposure to electromagnetic fields, have been issued in many countries. Most of the...Various regulations, aimed at the protection of human beings and electrical equipment against possible adverse effects resulting from exposure to electromagnetic fields, have been issued in many countries. Most of them are based on safety guidelines published by international expert groups. In this paper, electric and magnetic fields are calculated in the vicinity of 25 kV traction line supplying railway traction systems. Calculation results are compared to exposure limits specified by safety guidelines and regulations. Possible countermeasures for reduction of electromagnetic fields are proposed. Also, this paper presents a method for calculation of the induced voltages to an underground gas pipeline from a neighbouring 25 kV electric traction overhead line in case of short circuit. Calculations are performed with EMTP-ATP software. Possible countermeasures for reduction of induced voltages are proposed.展开更多
Fifty-six cases of the protrusion of the lumbar intervertebral disc in the treatment group were treated by drug-penetration and oral administration of traditional Chinese decoction plus traction, and the other 35 case...Fifty-six cases of the protrusion of the lumbar intervertebral disc in the treatment group were treated by drug-penetration and oral administration of traditional Chinese decoction plus traction, and the other 35 cases in the control group by oral administration of Chinese decoction and traction. The results showed that the cure rate in the treatment group was 83.9%, and that in the control group was 57.1%, with a statistically significant difference between the two groups (P<0.01), indicating that the former is a more effective therapy for protrusion of the lumbar intervertebral disc.展开更多
In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By ...In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By virtue of the Stroh formalism and Fourier transformation, the final expression of solutions in the physical domain contains only line integrals over [0, 2π] rather than infinite integrals. As the reduced cases, the half-space and homogeneous full-space solutions can be directly derived from the present solutions. Also, in terms of material domains, the present solutions can be reduced to the piezoelectric, piezomagnetic, purely elastic materials with different symmetries of material prop- erty. To carry out numerical calculations, Gauss quadrature is adopted. In the numerical examples, the effect of different loading locations on the response at the interface is analyzed. It is shown that, when the magnetic traction or electric dislocation is applied, the physical quantities on the interface may not decrease monotonically as the loading area moves away from the interface. The distributions of different in-plane physical quantities on the upper and lower interfaces under various extended horizontal loadings are compared and the differences are discussed. The work presented in this paper can serve as benchmarks for future numerical studies in related research fields.展开更多
The features of three modes of AT-fed traction power networks (TPNs) have been briefly described in the existing literature, which is not adequate yet. In this paper, these three modes of TPNs are compared mainly on T...The features of three modes of AT-fed traction power networks (TPNs) have been briefly described in the existing literature, which is not adequate yet. In this paper, these three modes of TPNs are compared mainly on TPN capacity, transformer capacity, rail potential and voltage level, etc., and conclusions are drawn.展开更多
Inrecent years,a series of cultural TV shows,including National Teasure,If National Treasures Could Speak and There is Something New in the Palace Museum, have increased the popularity of museum visits and changed the...Inrecent years,a series of cultural TV shows,including National Teasure,If National Treasures Could Speak and There is Something New in the Palace Museum, have increased the popularity of museum visits and changed the concept of audiences. Peo-ple's enthusiasm for enjoying cultural relics and visiting museums has been re-kindled.Museum tourism has become a new hot attraction for visitors.展开更多
[Objectives]To investigate the clinical efficacy of Cyclic Flexion Traction(CFT)in treating Lumbar Disc Herniation(LDH)and its effects on lumbocrural pain relief,functional improvement,and nerve root decompression.[Me...[Objectives]To investigate the clinical efficacy of Cyclic Flexion Traction(CFT)in treating Lumbar Disc Herniation(LDH)and its effects on lumbocrural pain relief,functional improvement,and nerve root decompression.[Methods]Seventy LDH patients treated at the orthopedic rehabilitation outpatient and inpatient departments of Shiyan Taihe Hospital from June 2022 to December 2024 were randomly divided into a treatment group(CFT therapy,n=35)and a control group(traditional traction,n=35).The treatment group received cyclic flexion traction(traction force of 30%-50%body weight with a cycle of 60-30-30 sec),while the control group received supine position linear traction.Both groups underwent 4 weeks of treatment,with assessments including visual analog scale(VAS),Oswestry Disability Index(ODI),and straight leg raising test(SLRT)angles.[Results]The treatment group showed a significantly greater reduction in VAS scores(from 6.97 to 2.31)compared to the control group(from 6.89 to 3.74)(P<0.05).Similarly,ODI improvement(41.62→15.73 compared with 40.98→22.84)and SLRT angle increase(41.23°→76.47°compared with 42.09°→64.19°)were more pronounced in the treatment group(all P<0.05).[Conclusions]Through dynamic decompression mechanisms,CFT therapy demonstrates superior efficacy to traditional traction in pain relief,functional recovery,and nerve root decompression(effective rate 94.29%compared with 77.14%,P<0.05),representing a superior non-surgical treatment option.展开更多
Replacing the energy density and convenience of diesel fuel for all forms of fossil fuel-powered trains presents significant challenges.Unlike the traditional evolutions of rail which has largely self-optimised to dif...Replacing the energy density and convenience of diesel fuel for all forms of fossil fuel-powered trains presents significant challenges.Unlike the traditional evolutions of rail which has largely self-optimised to different fuels and cost structures over 150 years,the challenges now present with a timeline of just a few decades.Fortunately,unlike the mid-1800s,simulation and modelling tools are now quite advanced and a full range of scenarios of operations and train trips can be simulated before new traction systems are designed.Full trip simulations of large heavy haul trains or high speed passenger trains are routinely completed controlled by emulations of human drivers or automated control systems providing controls of the“virtual train”.Recent developments in digital twins can be used to develop flexible and dynamic models of passenger and freight rail systems to support the new complexities of decarbonisation efforts.Interactions between many different traction components and the train multibody system can be considered as a system of systems.Adopting this multi-modelling paradigm enables the secure and integrated interfacing of diverse models.This paper demonstrates the application of the multi-modelling approach to develop digital twins for rail decarbonisation traction and it presents physics-based multi-models that include key components required for studying rail decarbonisation problems.Specifically,the challenge of evaluating zero-emission options is addressed by adding further layers of modelling to the existing fully detailed multibody dynamics simulations.The additional layers detail control options,energy storage,the alternate traction system components and energy management systems.These traction system components may include both electrical system and inertia dynamics models to accurately represent the driveline and control systems.This paper presents case study examples of full trip scenarios of both long haul freight trains and higher speed passenger trains.These results demonstrate the many complex scenarios that are difficult to anticipate.Flowing on from this,risks can be assessed and practical designs of zero-emission systems can be proposed along with the required recharging or refuelling systems.展开更多
Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to th...Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to the synthetic phenotype under pathological conditions. The mechanism underlying phenotypic transition of VSMCs is important for understanding its role in the pathophysiology of disease. Although numerous studies have reported various biochemical pathways that stimulate the phenotypic transition of VSMCs, very little is known about relation between their phenotypic transition and cellular traction force, which affects many cellular functions. In this study, we induced the differentiation of cultured VSMCs from the synthetic to the contractile phenotype by a low-serum cultivation and investigated changes in the cell traction forces using traction force microscopy technique. The expression of α-SMA, a contractile phenotype marker protein, was significantly upregulated with maturation of actin stress fibers in the low-serum culture, indicating VSMC differentiation was promoted in our experiments. The cells changed their morphology to an elongated bipolar shape, and the direction of the cell traction forces tended to align in the direction of the cell’s major axis. Despite the promotion of contractile differentiation in VSMCs, the overall cell traction forces were significantly reduced, indicating that excessive cell mechanical tension, which might induce cell proliferation and migration, was suppressed during contractile differentiation. These results suggest that suppression of cell traction force and enhanced force polarity might be key factors in VSMC differentiation induced by low serum culture.展开更多
The identification of the traction acting on a portion of the surface of an anisotropic solid is very important in structural health monitoring and optimal design of structures. The traction can be determined using in...The identification of the traction acting on a portion of the surface of an anisotropic solid is very important in structural health monitoring and optimal design of structures. The traction can be determined using inverse methods in which displacement or strain measurements are taken at several points on the body. This paper presents an inverse method based on the method of fundamental solutions for the traction identification problem in two-dimensional anisotropic elasticity. The method of fundamental solutions is an efficient boundary-type meshless method widely used for analyzing various problems. Since the problem is linear, the sensitivity analysis is simply performed by solving the corresponding direct problem several times with different loads. The effects of important parameters such as the number of measurement data, the position of the measurement points, the amount of measurement error, and the type of measurement, i.e., displacement or strain, on the results are also investigated. The results obtained show that the presented inverse method is suitable for the problem of traction identification. It can be concluded from the results that the use of strain measurements in the inverse analysis leads to more accurate results than the use of displacement measurements. It is also found that measurement points closer to the boundary with unknown traction provide more reliable solutions. Additionally, it is found that increasing the number of measurement points increases the accuracy of the inverse solution. However, in cases with a large number of measurement points, further increasing the number of measurement data has little effect on the results.展开更多
The surgical treatment of severe scoliosis and kyphoscoliosis in the pediatric population is complicated and has high morbidity and mortality risks.Severe scoliosis has traditionally been defined by a coronal Cobb ang...The surgical treatment of severe scoliosis and kyphoscoliosis in the pediatric population is complicated and has high morbidity and mortality risks.Severe scoliosis has traditionally been defined by a coronal Cobb angle of greater than 90°or 100°.The usual corrective methods for these patients have been anterior or posterior release and osteotomies using a combined anterior-posterior or posterior-only approach.Many of these patients have pre-existing pulmonary compromise;therefore,an anterior approach is often not reasonable or possible.Acute correction of a deformity may also cause neurologic injury.Halo gravity traction(HGT)allows for progressive,gradual,and sustained correction of the spinal deformity in the coronal,sagittal,and axial planes,leading to a decrease in the amount of correction needed at definitive posterior fusion.This relates to decreased postoperative neurologic deficit and improved pulmonary function.Preoperative HGT has evolved to be the surgical adjunct in the treatment of severe spinal deformity.Indications for HGT,best protocols of application,and optimal duration of traction still lack uniformity;thus,a review of the literature remains relevant and necessary.This review summarizes the existing literature on HGT,including its indications,applications,duration of traction,and associated complications.展开更多
The variation of the nonlinear contact stiffness induced by the elastic wheel-holding effect between the aircraft and tractor has an important effect on the vibration characteristics of an airfield towbarless traction...The variation of the nonlinear contact stiffness induced by the elastic wheel-holding effect between the aircraft and tractor has an important effect on the vibration characteristics of an airfield towbarless traction system,making it essential for ensuring the safety of this emerging towing-out mode.In this paper,the frequency evolutionary tendency of the traction system is studied and obtained considering the variation of nonlinear contact stiffness for the first time.A novel modal analysis method,based on a derived nonlinear contact relationship,is proposed to investigate the vibration characteristics for mechanical system.Frequency veering and mode exchange phenomena in the low-order modes are observed due to the variation of nonlinear contact stiffness.These findings are further validated by the experimental results of a scaled-down model.In addition,it is also found that the veering critical point will be shifted with the external loads.The study provides valuable insights into the vibration characteristics and frequency veering behavior of similar mechanism-based systems,such as towbarless traction system,and has important implications for improving their design and operational performance.展开更多
BACKGROUND Gastrointestinal submucosal tumors(SMTs)mostly grew in the lumen,but also some of the lesions were extraluminal,in which the stomach was the most co-mmon site.Gastrointestinal stromal tumor account for a la...BACKGROUND Gastrointestinal submucosal tumors(SMTs)mostly grew in the lumen,but also some of the lesions were extraluminal,in which the stomach was the most co-mmon site.Gastrointestinal stromal tumor account for a large proportion of SMT.Due to the deep lesion location of gastric SMT,endoscopic submucosal dissection related techniques are difficult to operate,while endoscopic full-thickness rese-ction(EFTR)has been widely used in clinical practice because it is less invasive and can preserve the physiological structure and function of the stomach.Ho-wever,complete closure of the gastrectomy site after EFTR is critical.If the closure is incomplete,it may cause peritonitis,late perforation and other conditions,and even require further surgical intervention.Although there are currently a number of suture devices and techniques that can be used to promote closure,they have the problem of requiring additional equipment or being inconvenient to use.Although metal clips are widely used,their effectiveness depends on the size and tension of the defect.Therefore,an effective and convenient endoscopic closure technique is urgently needed to solve the closure problem of gastric SMTs after treatment.AIM To investigate the effect of combined application of the preclosure technique and dental floss traction in gastric wound closure following EFTR.METHODS In this study,the data of 94 patients treated for gastric SMTs at the Gastrointestinal Endoscopy Center of the Affiliated Union Hospital of Fujian Medical University from April 2022 to May 2023 were retrospectively analyzed.The patients were divided into a preclosure group(54 patients)and a non-preclosure group(40 patients)on the basis of the timing of wound closure with titanium clips after dental floss traction-assisted EFTR.Each patient in the preclosure group had their wounds preclosed with titanium clips after subtotal lesion resection,whereas each patient in the non-preclosure group had their wounds closed with titanium clips after total lesion resection.The lesion size,wound closure time,number of titanium clips used,incidence of postoperative complications,and postoperative hospitalization time were compared between the two groups.RESULTS The wound closure time was significantly shorter in the preclosure group than in the non-preclosure group(6.69±2.109 minutes vs 11.65±3.786 minutes,P<0.001).The number of titanium clips used was significantly lower in the preclosure group(8.93±2.231)than in the non-preclosure group(12.05±4.495)(P<0.001).There was no sig-nificant difference between the two groups in terms of the need for an indwelling gastric tube or the length of postoperative hospital stay(6.41±1.31 vs 6.13±1.06 days).For all patients in the preclosure group and the non-preclosure group,resection was completed successfully without bleeding,abdominal pain,abdominal distension,or other postoperative complications.CONCLUSION Application of the preclosure technique combined with dental floss traction can be used intraoperatively to effectively close the surgical wound in patients undergoing EFTR,reliably preventing the tumor from falling into the peritoneal cavity.展开更多
Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-s...Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-step,RMS data only method for evaluating VTs in TPSSs.First,a kernel principal component analysis approach is used to diagnose the VT exhibiting significant measurement deviations over time,mitigating the influence of stochastic fluctuations in traction loads.Second,a back propagation neural network is employed to continuously estimate the measurement deviations of the targeted VT.Third,a trend analysis method is developed to assess the evolution of the measurement performance of VTs.Case studies conducted on field data from an operational TPSS demonstrate the effectiveness of the proposed method in detecting VTs with measurement deviations exceeding 1%relative to their original accuracy levels.Additionally,the method accurately tracks deviation trends,enabling the identification of potential early-stage faults in VTs and helping prevent significant economic losses in TPSS operations.展开更多
Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial c...Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial comminuted fractures admitted for treatment between July 2023 and December 2024 were selected. Using a random number table method, 30 patients were assigned to the observation group, where moderate traction using a dental arch splint combined with rigid internal fixation was applied. Another 30 patients were assigned to the control group and only received dental arch splint traction treatment. The total effective rate, postoperative recovery indicators, periodontal status, complication rate, and quality of life scores were compared between the two groups. Results: The total effective rate in the observation group was higher than that in the control group. The postoperative recovery indicators and periodontal status in the observation group were superior to those in the control group. The complication rate and quality of life score were lower in the observation group compared to the control group, with P < 0.05. Conclusion: Combining dental arch splint intermaxillary traction with rigid internal fixation can improve the periodontal status and quality of life of patients with facial comminuted fractures, shorten postoperative recovery time, reduce various complications, and enhance surgical efficacy.展开更多
基金the state assign-ment of Ministry of Science and Higher Education of the Russian Federation(theme No 123102000012-2“Compre-hensive study of aerodynamic characteristics of plasma systems of thermochemical fuel preparation”,agreement No 075-03-2023-028/1 of 05.10.2023).
文摘Modern electric traction networks(ETN)are equipped with automated systems for commercial accounting of power consumption(ASCAPC),which allows solving properly the problems of enhancing the energy efficiency of transportation processes.Energy efficiency of ETNs is defined as the amount of power losses in ETN components:overhead catenary systems and traction transformers.Due to the instability of traction loads and changes in their location in space,the electric traction network is different from the general network.It is necessary to develop an approach for loss analysis in traction networks and in transformers of traction substations.To solve this prob-lem,a balance-based technique for power loss calculation in traction networks based on ASCAPC data is proposed.First,the balance-based technique presented here breaks down the power consumption of the train by source.Then,calculates technical power losses in 25 and 225 kV traction networks as well as in traction transformers.Last,the technique is implemented in the form of an algorithm tested on real-life data and it is ready for practical use.
基金funded by Youth Science Foundation Fund Project of National Natural Science Foundation of China(51607148)Science and Technology R&D Program of China State Railway Group Co.,Ltd.(SY2020G001)Project of Sichuan Science and Technology Program(2021YJ0028)。
文摘Purpose–The traction cable is paralleled with the existing traction network of electrified railway through transverse connecting line to form the scheme of long distance power supply for the traction network.This paper aims to study the scheme composition and power supply distance(PSD)of the scheme.Design/methodology/approach–Based on the structure of parallel traction network(referred to as“cable traction network(CTN)”),the power supply modes(PSMs)are divided into cableþdirect PSM and cableþautotransformer(AT)PSM(including Japanese mode,French mode and new mode).Taking cableþJapanese AT PSM as an example,the scheme of long distance power supply for CTN under the PSMs of co-phase and out-of-phase power supply are designed.On the basis of establishing the equivalent circuit model and the chain circuit model of CTN,taking the train working voltage as the constraint condition,and based on the power flow calculation of multiple train loads,the calculation formula and process for determining the PSD of CTN are given.The impedance and PSD of CTN under the cableþAT PSM are simulated and analyzed,and a certain line is taken as an example to compare the scheme design.Findings–Results show that the equivalent impedance of CTN under the cableþAT PSM is smaller,and the PSD is about 2.5 times of that under the AT PSM,which can effectively increase the PSD and the flexibility of external power supply location.Originality/value–The research content can effectively improve the PSD of traction power supply system and has important reference value for the engineering application of the scheme.
文摘Introduction The mutual interference between surgical instruments in tho-racoscopic and laparoscopic surgery and the effective exposure of the surgical field are important factors affecting surgical op-erability[1].Magnetic anchoring and traction is one of the core techniques of magnetic surgery,which uses magnetic materials to generate force through indirect contact to achieve traction expo-sure of the target organs[2](Fig.1).
基金supported by the National Key Research and Development Program of China(No.2021YFB2601500)the Natural Science Foundation of Sichuan Province(No.2022NSFSC0405)。
文摘The autotransformer(AT)neutral current ratio method is widely used for fault location in the AT traction power network.With the development of high-speed electrified railways,a large number of data show that the relation between the AT neutral current ratio and the distance from the beginning of the fault AT section to the fault point(Q-L relation)is mostly nonlinear.Therefore,the linear Q-L relation in the traditional fault location method always leads to large errors.To solve this problem,a large number of load-related current data that can be used to describe the Q-L relation are obtained through the load test of the electric multiple unit(EMU).Thus,an improved fault location method based on the back propagation(BP)neural network is proposed in this paper.On this basis,a comparison between the improved method and the traditional method shows that the maximum absolute error and the average absolute error of the improved method are 0.651 km and 0.334 km lower than those of the traditional method,respectively,which demonstrates that the improved method can effectively eliminate the influence of nonlinear factors and greatly improve the accuracy of fault location for the AT traction power network.Finally,combined with a shortcircuit test,the accuracy of the improved method is verified.
文摘To solve the problem of temperature rise caused by the high power density of high-speed permanent magnet synchronous traction motors,the temperature rise of various components in the motor is analyzed by coupling the equivalent thermal circuit method and computational fluid dynamics.Also,a cooling strategy is proposed to solve the problem of temperature rise,which is expected to prolong the service life of these devices.First,the theoretical bases of the approaches used to study heat transfer and fluid mechanics are discussed,then the fluid flow for the considered motor is analyzed,and the equivalent thermal circuit method is introduced for the calculation of the temperature rise.Finally,the stator,rotor loss,motor temperature rise,and the proposed cooling method are also explored through experiments.According to the results,the stator temperature at 50,000 r/min and 60,000 r/min at no-load operation is 68℃ and 76℃,respectively.By monitoring the temperature of the air outlets inside and outside the motor at different speeds,it is also found that the motor reaches a stable temperature rise after 65 min of operation.Coupling of the thermal circuit method and computational fluid dynamics is a strategy that can provide the average temperature rise of each component and can also comprehensively calculate the temperature of each local point.We conclude that a hybrid cooling strategy based on axial air cooling of the inner air duct of the motor and water cooling of the stator can meet the design requirements for the ventilation and cooling of this type of motors.
文摘Various regulations, aimed at the protection of human beings and electrical equipment against possible adverse effects resulting from exposure to electromagnetic fields, have been issued in many countries. Most of them are based on safety guidelines published by international expert groups. In this paper, electric and magnetic fields are calculated in the vicinity of 25 kV traction line supplying railway traction systems. Calculation results are compared to exposure limits specified by safety guidelines and regulations. Possible countermeasures for reduction of electromagnetic fields are proposed. Also, this paper presents a method for calculation of the induced voltages to an underground gas pipeline from a neighbouring 25 kV electric traction overhead line in case of short circuit. Calculations are performed with EMTP-ATP software. Possible countermeasures for reduction of induced voltages are proposed.
文摘Fifty-six cases of the protrusion of the lumbar intervertebral disc in the treatment group were treated by drug-penetration and oral administration of traditional Chinese decoction plus traction, and the other 35 cases in the control group by oral administration of Chinese decoction and traction. The results showed that the cure rate in the treatment group was 83.9%, and that in the control group was 57.1%, with a statistically significant difference between the two groups (P<0.01), indicating that the former is a more effective therapy for protrusion of the lumbar intervertebral disc.
基金supported by the National Natural Science Foundation of China (10772024)
文摘In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By virtue of the Stroh formalism and Fourier transformation, the final expression of solutions in the physical domain contains only line integrals over [0, 2π] rather than infinite integrals. As the reduced cases, the half-space and homogeneous full-space solutions can be directly derived from the present solutions. Also, in terms of material domains, the present solutions can be reduced to the piezoelectric, piezomagnetic, purely elastic materials with different symmetries of material prop- erty. To carry out numerical calculations, Gauss quadrature is adopted. In the numerical examples, the effect of different loading locations on the response at the interface is analyzed. It is shown that, when the magnetic traction or electric dislocation is applied, the physical quantities on the interface may not decrease monotonically as the loading area moves away from the interface. The distributions of different in-plane physical quantities on the upper and lower interfaces under various extended horizontal loadings are compared and the differences are discussed. The work presented in this paper can serve as benchmarks for future numerical studies in related research fields.
文摘The features of three modes of AT-fed traction power networks (TPNs) have been briefly described in the existing literature, which is not adequate yet. In this paper, these three modes of TPNs are compared mainly on TPN capacity, transformer capacity, rail potential and voltage level, etc., and conclusions are drawn.
文摘Inrecent years,a series of cultural TV shows,including National Teasure,If National Treasures Could Speak and There is Something New in the Palace Museum, have increased the popularity of museum visits and changed the concept of audiences. Peo-ple's enthusiasm for enjoying cultural relics and visiting museums has been re-kindled.Museum tourism has become a new hot attraction for visitors.
基金Supported by the Hospital-level Program of Shiyan Taihe Hospital(2022JJXM144).
文摘[Objectives]To investigate the clinical efficacy of Cyclic Flexion Traction(CFT)in treating Lumbar Disc Herniation(LDH)and its effects on lumbocrural pain relief,functional improvement,and nerve root decompression.[Methods]Seventy LDH patients treated at the orthopedic rehabilitation outpatient and inpatient departments of Shiyan Taihe Hospital from June 2022 to December 2024 were randomly divided into a treatment group(CFT therapy,n=35)and a control group(traditional traction,n=35).The treatment group received cyclic flexion traction(traction force of 30%-50%body weight with a cycle of 60-30-30 sec),while the control group received supine position linear traction.Both groups underwent 4 weeks of treatment,with assessments including visual analog scale(VAS),Oswestry Disability Index(ODI),and straight leg raising test(SLRT)angles.[Results]The treatment group showed a significantly greater reduction in VAS scores(from 6.97 to 2.31)compared to the control group(from 6.89 to 3.74)(P<0.05).Similarly,ODI improvement(41.62→15.73 compared with 40.98→22.84)and SLRT angle increase(41.23°→76.47°compared with 42.09°→64.19°)were more pronounced in the treatment group(all P<0.05).[Conclusions]Through dynamic decompression mechanisms,CFT therapy demonstrates superior efficacy to traditional traction in pain relief,functional recovery,and nerve root decompression(effective rate 94.29%compared with 77.14%,P<0.05),representing a superior non-surgical treatment option.
文摘Replacing the energy density and convenience of diesel fuel for all forms of fossil fuel-powered trains presents significant challenges.Unlike the traditional evolutions of rail which has largely self-optimised to different fuels and cost structures over 150 years,the challenges now present with a timeline of just a few decades.Fortunately,unlike the mid-1800s,simulation and modelling tools are now quite advanced and a full range of scenarios of operations and train trips can be simulated before new traction systems are designed.Full trip simulations of large heavy haul trains or high speed passenger trains are routinely completed controlled by emulations of human drivers or automated control systems providing controls of the“virtual train”.Recent developments in digital twins can be used to develop flexible and dynamic models of passenger and freight rail systems to support the new complexities of decarbonisation efforts.Interactions between many different traction components and the train multibody system can be considered as a system of systems.Adopting this multi-modelling paradigm enables the secure and integrated interfacing of diverse models.This paper demonstrates the application of the multi-modelling approach to develop digital twins for rail decarbonisation traction and it presents physics-based multi-models that include key components required for studying rail decarbonisation problems.Specifically,the challenge of evaluating zero-emission options is addressed by adding further layers of modelling to the existing fully detailed multibody dynamics simulations.The additional layers detail control options,energy storage,the alternate traction system components and energy management systems.These traction system components may include both electrical system and inertia dynamics models to accurately represent the driveline and control systems.This paper presents case study examples of full trip scenarios of both long haul freight trains and higher speed passenger trains.These results demonstrate the many complex scenarios that are difficult to anticipate.Flowing on from this,risks can be assessed and practical designs of zero-emission systems can be proposed along with the required recharging or refuelling systems.
文摘Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to the synthetic phenotype under pathological conditions. The mechanism underlying phenotypic transition of VSMCs is important for understanding its role in the pathophysiology of disease. Although numerous studies have reported various biochemical pathways that stimulate the phenotypic transition of VSMCs, very little is known about relation between their phenotypic transition and cellular traction force, which affects many cellular functions. In this study, we induced the differentiation of cultured VSMCs from the synthetic to the contractile phenotype by a low-serum cultivation and investigated changes in the cell traction forces using traction force microscopy technique. The expression of α-SMA, a contractile phenotype marker protein, was significantly upregulated with maturation of actin stress fibers in the low-serum culture, indicating VSMC differentiation was promoted in our experiments. The cells changed their morphology to an elongated bipolar shape, and the direction of the cell traction forces tended to align in the direction of the cell’s major axis. Despite the promotion of contractile differentiation in VSMCs, the overall cell traction forces were significantly reduced, indicating that excessive cell mechanical tension, which might induce cell proliferation and migration, was suppressed during contractile differentiation. These results suggest that suppression of cell traction force and enhanced force polarity might be key factors in VSMC differentiation induced by low serum culture.
基金funded by Vice Chancellor of Research at Shiraz University(grant 3GFU2M1820).
文摘The identification of the traction acting on a portion of the surface of an anisotropic solid is very important in structural health monitoring and optimal design of structures. The traction can be determined using inverse methods in which displacement or strain measurements are taken at several points on the body. This paper presents an inverse method based on the method of fundamental solutions for the traction identification problem in two-dimensional anisotropic elasticity. The method of fundamental solutions is an efficient boundary-type meshless method widely used for analyzing various problems. Since the problem is linear, the sensitivity analysis is simply performed by solving the corresponding direct problem several times with different loads. The effects of important parameters such as the number of measurement data, the position of the measurement points, the amount of measurement error, and the type of measurement, i.e., displacement or strain, on the results are also investigated. The results obtained show that the presented inverse method is suitable for the problem of traction identification. It can be concluded from the results that the use of strain measurements in the inverse analysis leads to more accurate results than the use of displacement measurements. It is also found that measurement points closer to the boundary with unknown traction provide more reliable solutions. Additionally, it is found that increasing the number of measurement points increases the accuracy of the inverse solution. However, in cases with a large number of measurement points, further increasing the number of measurement data has little effect on the results.
文摘The surgical treatment of severe scoliosis and kyphoscoliosis in the pediatric population is complicated and has high morbidity and mortality risks.Severe scoliosis has traditionally been defined by a coronal Cobb angle of greater than 90°or 100°.The usual corrective methods for these patients have been anterior or posterior release and osteotomies using a combined anterior-posterior or posterior-only approach.Many of these patients have pre-existing pulmonary compromise;therefore,an anterior approach is often not reasonable or possible.Acute correction of a deformity may also cause neurologic injury.Halo gravity traction(HGT)allows for progressive,gradual,and sustained correction of the spinal deformity in the coronal,sagittal,and axial planes,leading to a decrease in the amount of correction needed at definitive posterior fusion.This relates to decreased postoperative neurologic deficit and improved pulmonary function.Preoperative HGT has evolved to be the surgical adjunct in the treatment of severe spinal deformity.Indications for HGT,best protocols of application,and optimal duration of traction still lack uniformity;thus,a review of the literature remains relevant and necessary.This review summarizes the existing literature on HGT,including its indications,applications,duration of traction,and associated complications.
基金co-supported by the Key Projects of the Civil Aviation Joint Fund of the National Natural Science Foundation of China(No.U2033208)。
文摘The variation of the nonlinear contact stiffness induced by the elastic wheel-holding effect between the aircraft and tractor has an important effect on the vibration characteristics of an airfield towbarless traction system,making it essential for ensuring the safety of this emerging towing-out mode.In this paper,the frequency evolutionary tendency of the traction system is studied and obtained considering the variation of nonlinear contact stiffness for the first time.A novel modal analysis method,based on a derived nonlinear contact relationship,is proposed to investigate the vibration characteristics for mechanical system.Frequency veering and mode exchange phenomena in the low-order modes are observed due to the variation of nonlinear contact stiffness.These findings are further validated by the experimental results of a scaled-down model.In addition,it is also found that the veering critical point will be shifted with the external loads.The study provides valuable insights into the vibration characteristics and frequency veering behavior of similar mechanism-based systems,such as towbarless traction system,and has important implications for improving their design and operational performance.
文摘BACKGROUND Gastrointestinal submucosal tumors(SMTs)mostly grew in the lumen,but also some of the lesions were extraluminal,in which the stomach was the most co-mmon site.Gastrointestinal stromal tumor account for a large proportion of SMT.Due to the deep lesion location of gastric SMT,endoscopic submucosal dissection related techniques are difficult to operate,while endoscopic full-thickness rese-ction(EFTR)has been widely used in clinical practice because it is less invasive and can preserve the physiological structure and function of the stomach.Ho-wever,complete closure of the gastrectomy site after EFTR is critical.If the closure is incomplete,it may cause peritonitis,late perforation and other conditions,and even require further surgical intervention.Although there are currently a number of suture devices and techniques that can be used to promote closure,they have the problem of requiring additional equipment or being inconvenient to use.Although metal clips are widely used,their effectiveness depends on the size and tension of the defect.Therefore,an effective and convenient endoscopic closure technique is urgently needed to solve the closure problem of gastric SMTs after treatment.AIM To investigate the effect of combined application of the preclosure technique and dental floss traction in gastric wound closure following EFTR.METHODS In this study,the data of 94 patients treated for gastric SMTs at the Gastrointestinal Endoscopy Center of the Affiliated Union Hospital of Fujian Medical University from April 2022 to May 2023 were retrospectively analyzed.The patients were divided into a preclosure group(54 patients)and a non-preclosure group(40 patients)on the basis of the timing of wound closure with titanium clips after dental floss traction-assisted EFTR.Each patient in the preclosure group had their wounds preclosed with titanium clips after subtotal lesion resection,whereas each patient in the non-preclosure group had their wounds closed with titanium clips after total lesion resection.The lesion size,wound closure time,number of titanium clips used,incidence of postoperative complications,and postoperative hospitalization time were compared between the two groups.RESULTS The wound closure time was significantly shorter in the preclosure group than in the non-preclosure group(6.69±2.109 minutes vs 11.65±3.786 minutes,P<0.001).The number of titanium clips used was significantly lower in the preclosure group(8.93±2.231)than in the non-preclosure group(12.05±4.495)(P<0.001).There was no sig-nificant difference between the two groups in terms of the need for an indwelling gastric tube or the length of postoperative hospital stay(6.41±1.31 vs 6.13±1.06 days).For all patients in the preclosure group and the non-preclosure group,resection was completed successfully without bleeding,abdominal pain,abdominal distension,or other postoperative complications.CONCLUSION Application of the preclosure technique combined with dental floss traction can be used intraoperatively to effectively close the surgical wound in patients undergoing EFTR,reliably preventing the tumor from falling into the peritoneal cavity.
基金supported by the National Natural Science Foundation of China(No.52107125)Applied Basic Research Project of Sichuan Province(No.2022NSFSC0250)Chengdu Guojia Electrical Engineering Co.,Ltd.(No.KYL202312-0043).
文摘Critical for metering and protection in electric railway traction power supply systems(TPSSs),the measurement performance of voltage transformers(VTs)must be timely and reliably monitored.This paper outlines a three-step,RMS data only method for evaluating VTs in TPSSs.First,a kernel principal component analysis approach is used to diagnose the VT exhibiting significant measurement deviations over time,mitigating the influence of stochastic fluctuations in traction loads.Second,a back propagation neural network is employed to continuously estimate the measurement deviations of the targeted VT.Third,a trend analysis method is developed to assess the evolution of the measurement performance of VTs.Case studies conducted on field data from an operational TPSS demonstrate the effectiveness of the proposed method in detecting VTs with measurement deviations exceeding 1%relative to their original accuracy levels.Additionally,the method accurately tracks deviation trends,enabling the identification of potential early-stage faults in VTs and helping prevent significant economic losses in TPSS operations.
基金Special Support Program for Scientific and Technological Talent“Application and Impact of Dental Arch Splint Intermaxillary Traction Combined with Rigid Internal Fixation on Oral Health in Patients with Facial Fractures”(DX2023BR18)。
文摘Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial comminuted fractures admitted for treatment between July 2023 and December 2024 were selected. Using a random number table method, 30 patients were assigned to the observation group, where moderate traction using a dental arch splint combined with rigid internal fixation was applied. Another 30 patients were assigned to the control group and only received dental arch splint traction treatment. The total effective rate, postoperative recovery indicators, periodontal status, complication rate, and quality of life scores were compared between the two groups. Results: The total effective rate in the observation group was higher than that in the control group. The postoperative recovery indicators and periodontal status in the observation group were superior to those in the control group. The complication rate and quality of life score were lower in the observation group compared to the control group, with P < 0.05. Conclusion: Combining dental arch splint intermaxillary traction with rigid internal fixation can improve the periodontal status and quality of life of patients with facial comminuted fractures, shorten postoperative recovery time, reduce various complications, and enhance surgical efficacy.
