The compressive yielding phenomenon of titanium alloys is not as focused and sufficiently ascertain as the tensile yielding phenomenon.In the present work,the peculiar compressive yielding behavior and the different d...The compressive yielding phenomenon of titanium alloys is not as focused and sufficiently ascertain as the tensile yielding phenomenon.In the present work,the peculiar compressive yielding behavior and the different dynamic responses of three different initial microstructures(singleβ,clavateβand lamellarβ)were investigated in an attractive metastableβtitanium alloy Ti-5553 using electron microscopes/crystallographic calculation/crystal plastic finite element simulation.Results reveal that the distinct compressive yielding behavior,steep peaks of sudden drop in the initial stage(very small true strain 0.03)of stress loading have appeared in the compression stress-strain curves except for the lamellarβinitial microstructure.Dislocation slip is the essential mechanism of the initial yielding behavior.Interlaced multiple-slip bands formed in the singleβinitial microstructure during the warm deformation process.A small quantity of single slip bands was observed in the deformed clavateβinitial microstructure.The abundant varied nano/ultrafineβsprecipitates were nucleated dynamically and dispersedly in all the three deformed initial microstructures.The multiple-slip bands formation and substantial nanoscaleβsresult in the highest peak of flow stress for singleβinitial microstructure.The compressive slip bands are formed early in the elastic–plastic deformation stage.As the increasing strain,the sample showed a significant compressive bulge,or eventually forming a strong adiabatic shear band or crack.These results are expected to provide a reference for the study of deformation behavior and mechanical properties of metastableβtitanium alloys.展开更多
Commercially pure titanium( CP Ti) sheets show typical planar anisotropy due to inherently crystallographic texture and rolling process. To characterize the initial,planar,plastic anisotropy of CP Ti sheets in forming...Commercially pure titanium( CP Ti) sheets show typical planar anisotropy due to inherently crystallographic texture and rolling process. To characterize the initial,planar,plastic anisotropy of CP Ti sheets in forming process,uniaxial tensile tests of cold-rolled TA1 sheets at 0°,45° and 90° to the rolling direction were performed at room temperature,corresponding stress-strain curves and Lankford coefficient( r value) were obtained. Based on Hill'48 and Barlat'89 yield criteria,the anisotropic behavior of TA1 sheets was investigated. In order to verify the accuracy of two models,the experimental values of yield stress and r were compared with predicted ones. It revealed that Barlat '89 criterion with M = 6 is the best agreement with experimental data,and the obtained model can be used in the simulation of forming process.展开更多
Commercially pure titanium （CP Ti） sheets show typical planar anisotropy due to the inherently crys- tallographic texture and manufacturing process. To char- acterize the planar anisotropic behaviors of CP Ti sheets...Commercially pure titanium （CP Ti） sheets show typical planar anisotropy due to the inherently crys- tallographic texture and manufacturing process. To char- acterize the planar anisotropic behaviors of CP Ti sheets in the forming process, uniaxial tensile tests of TA0 sheets were performed along rolling, transverse, and diagonal directions at room temperature; corresponding stress-strain curves and Lankford coefficients were obtained. Based on Hi11＇48 and Barlat＇89 yield functions, the planar anisotropy of TA0 sheets was investigated. In order to verify the accuracy of two models, we compared the experimental and predicted values of yield stress and Lankford coeffi- cients. It reveals that Barlat＇89 criterion with M = 10 is good agreement with experimental data, and the obtained function can be used in simulation of forming process.展开更多
An attempt was made on the quantitative prediction of the relationship hetween the yield stress and R-value along the parallel and perpendicular to the rolling direction of Ti plate based on analysis of the previous e...An attempt was made on the quantitative prediction of the relationship hetween the yield stress and R-value along the parallel and perpendicular to the rolling direction of Ti plate based on analysis of the previous experimental data.It is shown that the yield stress along one direction and another is quite synchronized with the R—value.According to the plasticity theo- ry,an formular of σ_(1s)/σ_(2s)=[(1+1/R_2)/(1+1/R_1)/^(1 2) was proposed,In statistic estima- tion.the calculated results are in good agreement with the experimental data.The availability of this formula was briefly discussed also.展开更多
基金supported by National Natural Science Foundation of China(51801156)Major State Research Development Program of China(2016YFB0701305)+1 种基金Natural Science Basic Research Plan in Shaanxi Province of China(2018JQ5035)the Fundamental Research Funds for the Central Universities(G2017KY0310).
文摘The compressive yielding phenomenon of titanium alloys is not as focused and sufficiently ascertain as the tensile yielding phenomenon.In the present work,the peculiar compressive yielding behavior and the different dynamic responses of three different initial microstructures(singleβ,clavateβand lamellarβ)were investigated in an attractive metastableβtitanium alloy Ti-5553 using electron microscopes/crystallographic calculation/crystal plastic finite element simulation.Results reveal that the distinct compressive yielding behavior,steep peaks of sudden drop in the initial stage(very small true strain 0.03)of stress loading have appeared in the compression stress-strain curves except for the lamellarβinitial microstructure.Dislocation slip is the essential mechanism of the initial yielding behavior.Interlaced multiple-slip bands formed in the singleβinitial microstructure during the warm deformation process.A small quantity of single slip bands was observed in the deformed clavateβinitial microstructure.The abundant varied nano/ultrafineβsprecipitates were nucleated dynamically and dispersedly in all the three deformed initial microstructures.The multiple-slip bands formation and substantial nanoscaleβsresult in the highest peak of flow stress for singleβinitial microstructure.The compressive slip bands are formed early in the elastic–plastic deformation stage.As the increasing strain,the sample showed a significant compressive bulge,or eventually forming a strong adiabatic shear band or crack.These results are expected to provide a reference for the study of deformation behavior and mechanical properties of metastableβtitanium alloys.
基金Sponsored by the Key Technologies R&D Program(Grant No.2011BAE13B05)the National Natural Science Foundation of China(Grant No.51075031)
文摘Commercially pure titanium( CP Ti) sheets show typical planar anisotropy due to inherently crystallographic texture and rolling process. To characterize the initial,planar,plastic anisotropy of CP Ti sheets in forming process,uniaxial tensile tests of cold-rolled TA1 sheets at 0°,45° and 90° to the rolling direction were performed at room temperature,corresponding stress-strain curves and Lankford coefficient( r value) were obtained. Based on Hill'48 and Barlat'89 yield criteria,the anisotropic behavior of TA1 sheets was investigated. In order to verify the accuracy of two models,the experimental values of yield stress and r were compared with predicted ones. It revealed that Barlat '89 criterion with M = 6 is the best agreement with experimental data,and the obtained model can be used in the simulation of forming process.
基金financially supported by the National Natural Science Foundation of China (No. 51075031,50831008)
文摘Commercially pure titanium （CP Ti） sheets show typical planar anisotropy due to the inherently crys- tallographic texture and manufacturing process. To char- acterize the planar anisotropic behaviors of CP Ti sheets in the forming process, uniaxial tensile tests of TA0 sheets were performed along rolling, transverse, and diagonal directions at room temperature; corresponding stress-strain curves and Lankford coefficients were obtained. Based on Hi11＇48 and Barlat＇89 yield functions, the planar anisotropy of TA0 sheets was investigated. In order to verify the accuracy of two models, we compared the experimental and predicted values of yield stress and Lankford coeffi- cients. It reveals that Barlat＇89 criterion with M = 10 is good agreement with experimental data, and the obtained function can be used in simulation of forming process.
文摘An attempt was made on the quantitative prediction of the relationship hetween the yield stress and R-value along the parallel and perpendicular to the rolling direction of Ti plate based on analysis of the previous experimental data.It is shown that the yield stress along one direction and another is quite synchronized with the R—value.According to the plasticity theo- ry,an formular of σ_(1s)/σ_(2s)=[(1+1/R_2)/(1+1/R_1)/^(1 2) was proposed,In statistic estima- tion.the calculated results are in good agreement with the experimental data.The availability of this formula was briefly discussed also.
基金The Project of Introducing Talents of Discipline to Universities(B08040)The International Cooperation Fund of the State Key Laboratory of Solidification Processing in NWPU
