The application of mass timber elements in different structures has gained publicity over the last few years,pri-marily due to climate change adaptation policies and net zero carbon targets.Timber is a renewable const...The application of mass timber elements in different structures has gained publicity over the last few years,pri-marily due to climate change adaptation policies and net zero carbon targets.Timber is a renewable construction material that can outperform other building materials regarding environmental impact.However,when used in seismically active regions,its application has been limited due to the uncertainties on their seismic behaviour in respect with different design standards and limited ductility in conventional connections.Conventional timber connections typically suffer from stiffness and strength degradation under cyclic loads.Their repairability is also low due to permanent damage in the fasteners and the associated crushing in the wood fibres.The use of friction connections can be an efficient way to mitigate these issues.They offer many advantages as they are economical and yet provide a high level of reliable and continuous energy dissipation.In recent years,a new generation of friction connections has been developed that can provide self-centring behaviour(i.e.,the ability of the structure to return to its original position at the end of an earthquake).However,how these connections perform compared to a mass timber system with conventional timber connections is still unknown.Several studies in the literature have suggested that these connections can enhance the performance of mass timber structures.However,the seismic performance of such systems specifically in terms of base shear,response drifts and response accelerations-has not been thoroughly investigated.This paper examines various design aspects of conventional friction connections and self-centring friction connections,providing insights into their differences concerning key seismic performance indicators.It compares the seismic performance of mass timber buildings equipped with both solutions,highlighting their advantages and limitations and drawing conclusions based on the results.The key findings are that friction connections can provides a superior seismic performance for timber structures.However,that may need to be combined with a parallel system avoid residual displacements.展开更多
Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assem...Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assembly,an excellent strength-to-weight ratio,and appealing aesthetic features.In a platform-type construction,each story is constructed by placing the floor panels on top of the load-bearing wall,creating a platform for the level above.Although this method offers numerous advantages,recent research findings have revealed that cross-laminated(CLT)platform buildings with conventional connections,such as wall-to-floor hold-down brackets and shear connectors with nails and screws,are prone to experience a high degree of damage under design-level earthquakes.Consequently,conventional connections in platform-type construction are vulnerable to more damage under aftershocks and do not meet the damage avoidance requirements of seismic design.This paper introduces an innovative floor-to-wall connection for a platform-type low-rise mass timber building that mitigates the limitations of conventional connections.The effectiveness of the proposed connection has been investigated,and the seismic performance of the system,which incorporates the proposed connection,has been outlined in this paper.A numerical model with an innovative inter-story isolation system is developed in ETABS,and the seismic performance of the isolated structure was evaluated using Response Spectrum Analysis(RSA)and Nonlinear Time History Analysis(NLTHA).This study revealed that inter-story isolation systems significantly reduced the seismic demands on the mass timber components,demonstrating the system’s ability to dissipate seismic energy.Additionally,the system displayed effective energy dissipation while exhibiting self-centering behaviour.展开更多
Light-framed timber structure(LTS)buildings have been highly valued in recent years due to their low-carbon characteristics.However,the applicability of the building envelope is closely related to indoor and outdoor c...Light-framed timber structure(LTS)buildings have been highly valued in recent years due to their low-carbon characteristics.However,the applicability of the building envelope is closely related to indoor and outdoor conditions.The hot summer and cold winter(HSCW)climate zone in China has high humidity and great temperature variation throughout the year,resulting in distinct outdoor environments in different seasons.The indoor environment is greatly affected by energy-consumption patterns and window-opening habits,which largely depend upon the regulation operations of occupants.All these interrelated factors lead to extremely complex boundary conditions on each side of the building envelope.Whether the structures of LTS buildings are applicable in this climate zone,therefore,needs to be carefully considered.In this study,two LTS buildings with different envelopes were established in Haining,China,situated in the HSCW climate zone,and selected as the study objects.Different operation modes were adopted to create a variety of indoor environments.Under each condition,the processes of heat and moisture transfer within the building envelopes and the indoor environment were monitored and compared.The comparison indicated that the building envelope with high moisture storage and insulation ability maintained a relatively stable indoor environment,especially when the environment changed abruptly.Conversely,if the outdoor environment was equable(e.g.,relative humidity within the range of 30%–60%)or intermittent energy consumption modes were adopted,the building envelope with a low thermal inertia index and weak moisture-buffering ability performed better because it enabled a faster response of the indoor environment to air conditioning.Moreover,a high risk of moisture accumulation between the thermal insulation layer and other materials with a large water vapour transfer resistance factor was also identified,suggesting a higher requirement for the vapour insulation of the envelopes of LTS buildings.展开更多
This paper conducts a comprehensive analysis of the export dynamics within the Ukrainian timber industry, emphasizing its pivotal role in the national economy. The study begins by outlining the research objectives, co...This paper conducts a comprehensive analysis of the export dynamics within the Ukrainian timber industry, emphasizing its pivotal role in the national economy. The study begins by outlining the research objectives, context, and innovative methodologies, setting the stage for a deep dive into the theoretical underpinnings of sustainable and competitive trade. It explores Ukraine’s rich forest biodiversity across varied vegetation zones and its geopolitical significance. Detailed evaluations of forest resource management, policy frameworks, and institutional support form the core of the analysis. Challenges such as imbalanced export structures and legal inconsistencies are critically examined. The research employs trade gravity models and competitive indicators like the Revealed Comparative Advantage (RCA) and Market Share (MS) to assess factors influencing exports and to forecast potential growth areas. The findings inform strategic recommendations aimed at enhancing export capacity through market diversification, brand development, and legal stability. The conclusion highlights the need for strategic interventions to harness Ukraine’s timber resources sustainably, balancing economic gains with environmental stewardship.展开更多
The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and...The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and the character of neural network on exactly describing nonlinear and uncertainty dynamic process organically. The method implements functions of adaptive and self-learning by adjusting weighting parameters. Adaptive neural network can make some output trail given hoping value to decouple in static state. The simulation result indicates the validity, veracity and robustness of the method used in the timber drying process展开更多
The mechanical properties of the monodirectional Gutou mortise-tenon joints of the ancient Chinese traditional timber buildings in the Yangtze River region were studied using the experimental method. Three monodirecti...The mechanical properties of the monodirectional Gutou mortise-tenon joints of the ancient Chinese traditional timber buildings in the Yangtze River region were studied using the experimental method. Three monodirectional Gutou mortise-tenon joints were designed according to the actual configurations. The failure modes,the hysteretic curves,the skeleton curves, the rotation rigidities, and the energy dissipation capacity of this type of mortise-tenon joints under the low cyclic reversed loading were obtained. The results show that the hysteretic curves of the monodirectional Gutou mortise-tenon joints appear to be Z shape and have obvious pinch effects. During the process of the test,these mortisetenon joints pass orderly through the elastic stage,the yield stage and the failure stage. The energy dissipation capacity of these mortise-tenon joints generally decreases with the increase in the rotation angle. The equivalent viscous damping coefficients of the monodirectional Gutou mortise-tenon joints are between 0. 161 and 0. 193. The results can provide the theoretical base for the computing analysis and repair design of Chinese traditional timber buildings in the Yangtze River region.展开更多
This article, by using mathematical expressions, offers a scientific framework for understanding how the grading system of Qing′s structural carpentry determines the design and construction in the grand style timber...This article, by using mathematical expressions, offers a scientific framework for understanding how the grading system of Qing′s structural carpentry determines the design and construction in the grand style timber architecture.The Qing′s grand style timber structure, which is ready for prefabrication and assembly, is extremely hierarchical oriented and significantly standardized. The general procedure in designing a grand style timber structure is to start with the grade that defines the basic module (dou kou); next comes with the number of bracket set (cuan), the number of longitudinal bays and the number of purlins which affect its plan and cross section; thirdly choose a roof type that determines its longitudinal section and the facade as well. A series of formulae are conducted to help depict the layout, cross sectional roof curvature and special longitudinal treatments in 4 sloped and 9 spined roofs respectively.展开更多
Beginning in the late 1970’s forest industry timberland gained the eye of financial investors. Diamond International and Crown Zellerbach were early firms that were purchased for the “break-up value” of their timbe...Beginning in the late 1970’s forest industry timberland gained the eye of financial investors. Diamond International and Crown Zellerbach were early firms that were purchased for the “break-up value” of their timberland. Timberland was perceived as undervalued by investors and made forest industry firms attractive takeover targets. This started a process where forest industry divested of its timberland. Some firms formed separate entities for its timberland base. Acquisitions and mergers became popular in the industry. Some forest industry companies converted to real estate investment trusts, for tax and defensive reasons. Large institutional investors became interested in timberland as means to diversify their portfolios and increase financial performance. Timber management investment organizations developed to manage and procure timberland for these institutional investors. Today little of the forest industry timberland remains with vertically-integrated forest products companies. South Carolina’s forest industry timberland decreased by about 800,000 ha since 1993 (or nearly 90%). This has implications for the state’s timber supply. Forest industry timberlands were some of the most productive and intensively managed forests in the state. We address how forest management might change on this timberland and how long-term timber supply might be impacted in the state.展开更多
The timber-concrete composite(TCC)slabs have become a preferred choice of floor systems in modern multi story timber buildings.This TCC slab consisted of timber and a concrete slab which were commonly connected togeth...The timber-concrete composite(TCC)slabs have become a preferred choice of floor systems in modern multi story timber buildings.This TCC slab consisted of timber and a concrete slab which were commonly connected together with inclined self-tapping screws(STSs).To more accurately predict the fire performance of TCC slabs,the mechanical behavior of TCC connections under high temperature was investigated by numerical simulation in this study.The interface slip of TCC connections was simulated by a proposed Finite Element(FE)model at room temperature,and different diameter and penetration length screws were considered.The effectiveness of this FE model was validated by comparing with the existing experimental results.Furthermore,the sequentially coupling thermal stress analyses of this model were conducted,and the relationship between the reduction coefficient of connection performance and the effective penetration length of screws was summarized.This study gave the fit-ting expressions for the reduction coefficient of slip modulus and joint strength.Finally,the numerical investiga-tions of the fire performance of TCC slabs considering the char fall-off of Cross Laminated Timber(CLT)were performed to verify the effectiveness of the proposed reduction law.Comparing the fire-resistance time with experimental results showed deviation of the proposed model was−14.02%.展开更多
Fiber reinforced polymer(FRP)has been used in the construction industry because of its advantages such as high strength,light weight,corrosion resistance,low density and high elasticity.This paper presents a review of...Fiber reinforced polymer(FRP)has been used in the construction industry because of its advantages such as high strength,light weight,corrosion resistance,low density and high elasticity.This paper presents a review of bonding techniques adopted to strengthen timber beams using FRP to achieve larger spans.Different methods of bonding between FRP and timber beams have been summarized with a focus on the influencing factors and their effects as well as relevant bond-slip models proposed for fundamental understanding.Experimental investigations to evaluate the flexural performance of timber beams strengthened by FRP bars,sheets and wraps have also been critically reviewed to identify key influencing parameters.Limited research available on the shear performance of FRP reinforced timber beams have been analyzed to determine the influencing factors of the shear performance in timber-FRP beams.The paper finally presents an overall summary of the current-state-of-the-art and proposes some future research directions in the field.展开更多
This paperprovides a historical overview intending to clarify the methods of interpretation of timber-framed buildings by different authors of construction treatises, and structural intentions of the carpentry designe...This paperprovides a historical overview intending to clarify the methods of interpretation of timber-framed buildings by different authors of construction treatises, and structural intentions of the carpentry designers and master builders, throughout the centuries, until the period when it became scientific structural theory. It describes the ＂box-frame＂ construction that appeared in Lisbon, after the earthquake of 1755, characterized by its good seismic resistance. This knowledge is important to determine a strategy of an efficient restoration practice in historical constructions which require an intervention subordinated to its raised patrimonial and artistic value, minimum, which respects the authenticity of its structural and construction conception and which is reversible and compatible, in physical, chemical, mechanic and aesthetic terms. Empirical understanding of the most important properties of wood to structure purposes, the defects of structural timbers, the framing and the preliminary survey followed by the structural survey were some of the difficulties which can be overcame in practice.展开更多
Theoretical study on and safeguarding of cultural landscape heritage has been put on the agenda of heritage protection in Zhejiang and Fujian provinces.The safeguarding of timber-framed arch bridge heritage in the pas...Theoretical study on and safeguarding of cultural landscape heritage has been put on the agenda of heritage protection in Zhejiang and Fujian provinces.The safeguarding of timber-framed arch bridge heritage in the past 5 decades could be classified into 3 stages,and heritage protection in all 3 stages was closely related to original meaning of "landscape",which proved that timber-framed arch bridge heritage had profound inside information,and the safeguarding of timber-framed arch bridge from the perspective of cultural landscape heritage was worth further study.Safeguarding of timber-framed arch bridge cultural landscape heritage focused on integrated conservation,but not protection of individual bridges.Integrated conservation of world heritage is to maintain and restore the integrated environment landscape of the heritage,thus protection of timber-framed arch bridge heritage is not only to explore its architectural craftsmanship,but also to lay a foundation for the dynamic succession of such craftsmanship as intangible cultural heritage.Value of the existing timber-framed arch bridges as historic building heritage was discussed,and it was proposed that ultimate objectives of the safeguarding could be realized step by step from 3 layers.展开更多
This study investigates the enhanced effect of timber infill walls on the seismic behavior of traditional Chinese timber frames.Two 1/2 scaled traditional Chinese timber infill walls(TIWs),two 1/2 scaled timber frames...This study investigates the enhanced effect of timber infill walls on the seismic behavior of traditional Chinese timber frames.Two 1/2 scaled traditional Chinese timber infill walls(TIWs),two 1/2 scaled timber frames with timber infill walls(TFTIWs)and one 1/2 scaled timber frame(TF)were fabricated and tested under low-cyclic reversed loading.The failure modes,strength,stiffness,and energy consumption capacity of the TIWs and the TFTIWs were obtained,and the effects of the TIWs on the seismic performance of the TFTIWs were investigated.The results showed that the TIWs can increase the stiffness and ultimate bearing capacity of the TF,up to 60%and 80%,respectively.The strength degradation coefficient of the TFTIWs was slightly higher than that of the TF when the inter-story drift ratio exceeded 0.02 rad,and the TIWs helped to mitigate the strength degradation of the TFTIWs.It was also found that the TFTIWs had a higher cumulative energy dissipation when compared with the TF(up to a 60%increase),indicating the TIWs had reasonably good energy dissipation capacity.When the TIWs generated a solid contribution to the carrying capacity and energy dissipation of the TF,the lateral drift thresholds were 1/100 and 1/43 of the column height,respectively.Furthermore,the TIWs and TFTIWs presented a good ductility,and the TIW could effectively reduce the pull-out amount of the tenon from the mortise of the TF;however,the TIWs had little influence on the stiffness degradation level or improvement of the ductility of the TF.展开更多
Cross laminated timber(CLT)is an innovative and environment friendly engineered timber product with superior structural performance.CLT offers strong resistance against both in-plane and out-of-plane loading.Hence,it ...Cross laminated timber(CLT)is an innovative and environment friendly engineered timber product with superior structural performance.CLT offers strong resistance against both in-plane and out-of-plane loading.Hence,it is widely used as floors,roofs or wall elements.Considerable experimental research on CLT under various loading conditions has been done in the recent past.This article presents a comprehensive review of various design methods to determine basic mechanical properties such as tension,compression and rolling shear strength of CLT with primary focus on Norway spruce.All relevant experimental data available from existing literature were collated and consequently been used to evaluate the performance of various methods to design CLT structures.The comparison revealed that different methods show considerable variance in predicting the capacity of CLT panels due to the variation in timber species,which affects the corresponding mechanical properties of the lamella.In addition to species,rolling shear properties can also vary considerably depending on the type of experimental technique used for testing.A predictive model has also been proposed to correlate rolling shear strength obtained from shear analogy method to that obtained using planar shear.展开更多
This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables...This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables studied were timber species(Laran and Batai),layers of lamination(3-layer and 5-layer),loading direction in bending(in-plane and out-of-plane),loading direction in compression(x-,y-,and z-axis)and different treatment conditions for bonding performance test.The desired outputs of this study were bending and compression properties(strength and stiffness)as well as bonding performance(block shear strength,wood failure percentage and delamination value).The bending and compression test were conducted according to EN16351:2015 and EN408:2012,respectively.On the other hand,the bonding performance test was determined by block shear and delamination test based on EN16351:2015 and EN14374:2004,respectively.Prior to block shear test,the samples were subjected to three different treatment conditions.The results showed that CLT made from 3-layer Laran timber,loaded at out-of-plane direction exhibited the highest bending properties.Contrarily,CLT made from 5-layered Batai timber,loaded at in-plane direction showed the lowest bending properties.Laran samples for compression loaded at x-axis exhibited the best compressive properties.Generally,Laran CLT showed greater bonding performance determined by shear test compared to Batai CLT for both 3-and 5-layer panels.On the contrary,delamination results showed that Batai CLT demonstrated better bonding performance compared to Laran CLT.In terms of bonding performance measured by wood failure percentage(WFP),most samples under various treatment conditions showed WFP≥80%except for samples under wet condition with WFP≤60%.展开更多
This article presents experimental results of steel-timber-steel(STS)joints loaded parallel to grain.Eight groups of specimens were designed,and tensile tests were performed.The fastener types and fastener numbers wer...This article presents experimental results of steel-timber-steel(STS)joints loaded parallel to grain.Eight groups of specimens were designed,and tensile tests were performed.The fastener types and fastener numbers were considered to evaluate the tensile strengths and ductility performances of the STS joints.The screws with 6 mm diameter and the innovative steel-tubes with 18 mm diameter were adopted as connecting fasteners.The experimental results were discussed in terms of yielding and ultimate strengths,slip stiffness,and ductility factors.The ductility classification and failure mechanisms of each group of specimens were analyzed.It was demonstrated that the STS joint with large diameter steel-tubes showed acceptable ductility,which was close to the ductility of the STS joint with small diameter screws,thanks to the hollow structure of the steel-tube.The theoretical strengths of various failure modes for the joints with small diameter screws or large diameter steel-tubes were calculated and compared with the experimental results.The ductile performance of the STS joint was discussed by comparing the theoretical strengths of various failure modes.The effective number of the STS joint with multifasteners was also analyzed by considering the failure mechanisms in aspects of tensile strength and slip stiffness.展开更多
This paper lbcuses on the main characteristics of a tree-shaped timber structural system or simply tree-shaped. One of them is the complexity of its steel connections, responsible for the joint of bar elements, compou...This paper lbcuses on the main characteristics of a tree-shaped timber structural system or simply tree-shaped. One of them is the complexity of its steel connections, responsible for the joint of bar elements, compounding a complex structural system, which requires the application of the CYPECAD software version 2007 to solve the calculations problems. Its efficiency was confirmed by a variety of laboratory tests carried out with the whole structure. The tree-shaped is a timber structure that can be used in a large number of destinations, including residences, malls, sheds, hangars, etc.. Originally, it was conceived based on the well-known masterpiece ＂Sagrada Familia＂, whose author was Architect Antoni Gaudi I Cornet （1852-1926） in Barcelona/Spain. It was designed at the end of 19th century and its construction is still not finished. Gaudi inverted the logical order of the gothic concepts, i.e., light weights below and heavy weights above. Based on this concept, he always had in mind the figure of a tree in nature. The tree-shaped follows the same idea, using timber pieces connected by steel plates. Theoretical and numerical analyses have shown its efficiency and lightness for use in timber structures.展开更多
The Emerging Timber Bridge Program to Sao Paulo state （ETBPSP） was started in 2001 with the main objective of research and development of new technologies for timber bridge construction. After five years of this pro...The Emerging Timber Bridge Program to Sao Paulo state （ETBPSP） was started in 2001 with the main objective of research and development of new technologies for timber bridge construction. After five years of this program eleven demonstration timber bridges were constructed in the State of Sao Paulo, whereas eight composite timber/concrete bridges, one log timber girder bridge with transversal sawn deck, one transversal lumber prestressed timber bridge and one transversal cellular plywood box prestressed bridge. As a final objective is the divulgation of the constructive and structural systems in extension courses to municipal engineers and in a complete publication of timber bridges project plans with the different structural and constructional systems. This paper describes the goals of the MTBPSP, the accomplishments of the program in the first five years, the information sheet of the bridges and outlines some obstacles and opportunities.展开更多
Two analytical procedures （Crank＇s method and Dincer＇s method） for porous solid materials were reevaluated and used to determine moisture diffusion coefficients and moisture transfer coefficients for larch lumber ...Two analytical procedures （Crank＇s method and Dincer＇s method） for porous solid materials were reevaluated and used to determine moisture diffusion coefficients and moisture transfer coefficients for larch lumber subjected to drying. A diffusion-like equation was used to describe drying process data. The lumber was idealized in the modeling as infinite plates. The moisture transport process inside the board was assumed to be one-dimensional. The macroscopic drying kinetics curves of larch timber at particular conditions were determined experimentally. Based on these data, calculation for both the moisture diffusion coefficients and moisture transfer coefficients by the Dincer＇s analytical procedure were made. The dynamic moisture diffusion coefficients by the traditional Crank＇s method were calculated. In general, diffusion coefficients calculated by the Dincer＇s method were all higher than those by Crank＇s method. These results could be due to the differences between two analytical methods and also different characteristics between solid moisture diffusion process and heat transfer process. Therefore the analysis and solution procedures of moisture diffusion differential equations need to be adapted in the future. With drying temperature＇s increasing moisture diffusion coefficient （D） and moisture transfer coefficient （k） increases accordingly. Also the relationships between diffusion coefficients and temperature as well as material moisture contents were analyzed by using Arrhenius equation and bound water transport theory.展开更多
This study addresses the increasing demand for large-diameter production timber,and considers the time and space variability of half-sib families of Pinus massoniana.Height,diameter at breast height(DBH)and timber vol...This study addresses the increasing demand for large-diameter production timber,and considers the time and space variability of half-sib families of Pinus massoniana.Height,diameter at breast height(DBH)and timber volume of 440 open-pollinated half-sib progeny families were investigated in 14 progeny trials in different years and production regions.An evaluation of the genetic variation of all half-sib families was carried out during the sustainable rapid growth period and individual volumes were characterized as a major index.ANOVA analysis showed that there was considerable variance in the growth traits of most families in different years and on different sites.The variations caused by temporal and spatial changes of the mating system required three selection methods for analysis.The results show that there were differences among the heritabilities of different growth traits by different halfsib progenies.Average heritability values of height,DBH and volume were 0.33,0.34 and 0.36,respectively.Fortyfive superior families were selected in every progeny test,12 were selected in progeny trials by different years and five in different habitat progeny trials.Three superior families(Gui GC553A,Gui GC414A and Gui GC431A)were selected,although in different years and production regions.The genetic gains of timber volume of these selected r families ranged from 1.20 to 47.00%,which could provide a foundation for superior wood property selection and serve as material for seed improvement and extension in surrounding areas.展开更多
文摘The application of mass timber elements in different structures has gained publicity over the last few years,pri-marily due to climate change adaptation policies and net zero carbon targets.Timber is a renewable construction material that can outperform other building materials regarding environmental impact.However,when used in seismically active regions,its application has been limited due to the uncertainties on their seismic behaviour in respect with different design standards and limited ductility in conventional connections.Conventional timber connections typically suffer from stiffness and strength degradation under cyclic loads.Their repairability is also low due to permanent damage in the fasteners and the associated crushing in the wood fibres.The use of friction connections can be an efficient way to mitigate these issues.They offer many advantages as they are economical and yet provide a high level of reliable and continuous energy dissipation.In recent years,a new generation of friction connections has been developed that can provide self-centring behaviour(i.e.,the ability of the structure to return to its original position at the end of an earthquake).However,how these connections perform compared to a mass timber system with conventional timber connections is still unknown.Several studies in the literature have suggested that these connections can enhance the performance of mass timber structures.However,the seismic performance of such systems specifically in terms of base shear,response drifts and response accelerations-has not been thoroughly investigated.This paper examines various design aspects of conventional friction connections and self-centring friction connections,providing insights into their differences concerning key seismic performance indicators.It compares the seismic performance of mass timber buildings equipped with both solutions,highlighting their advantages and limitations and drawing conclusions based on the results.The key findings are that friction connections can provides a superior seismic performance for timber structures.However,that may need to be combined with a parallel system avoid residual displacements.
基金gratitude to WIDE Trust New Zealand for providing the opportunity and funding for this research,as well as QuakeCoRE,a New Zealand Tertiary Education Commission-funded Centre,for partially funding this research.This is QuakeCoRE,publication number 1013.
文摘Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assembly,an excellent strength-to-weight ratio,and appealing aesthetic features.In a platform-type construction,each story is constructed by placing the floor panels on top of the load-bearing wall,creating a platform for the level above.Although this method offers numerous advantages,recent research findings have revealed that cross-laminated(CLT)platform buildings with conventional connections,such as wall-to-floor hold-down brackets and shear connectors with nails and screws,are prone to experience a high degree of damage under design-level earthquakes.Consequently,conventional connections in platform-type construction are vulnerable to more damage under aftershocks and do not meet the damage avoidance requirements of seismic design.This paper introduces an innovative floor-to-wall connection for a platform-type low-rise mass timber building that mitigates the limitations of conventional connections.The effectiveness of the proposed connection has been investigated,and the seismic performance of the system,which incorporates the proposed connection,has been outlined in this paper.A numerical model with an innovative inter-story isolation system is developed in ETABS,and the seismic performance of the isolated structure was evaluated using Response Spectrum Analysis(RSA)and Nonlinear Time History Analysis(NLTHA).This study revealed that inter-story isolation systems significantly reduced the seismic demands on the mass timber components,demonstrating the system’s ability to dissipate seismic energy.Additionally,the system displayed effective energy dissipation while exhibiting self-centering behaviour.
基金supported by the National Natural Science Foundation of China(No.51978623).
文摘Light-framed timber structure(LTS)buildings have been highly valued in recent years due to their low-carbon characteristics.However,the applicability of the building envelope is closely related to indoor and outdoor conditions.The hot summer and cold winter(HSCW)climate zone in China has high humidity and great temperature variation throughout the year,resulting in distinct outdoor environments in different seasons.The indoor environment is greatly affected by energy-consumption patterns and window-opening habits,which largely depend upon the regulation operations of occupants.All these interrelated factors lead to extremely complex boundary conditions on each side of the building envelope.Whether the structures of LTS buildings are applicable in this climate zone,therefore,needs to be carefully considered.In this study,two LTS buildings with different envelopes were established in Haining,China,situated in the HSCW climate zone,and selected as the study objects.Different operation modes were adopted to create a variety of indoor environments.Under each condition,the processes of heat and moisture transfer within the building envelopes and the indoor environment were monitored and compared.The comparison indicated that the building envelope with high moisture storage and insulation ability maintained a relatively stable indoor environment,especially when the environment changed abruptly.Conversely,if the outdoor environment was equable(e.g.,relative humidity within the range of 30%–60%)or intermittent energy consumption modes were adopted,the building envelope with a low thermal inertia index and weak moisture-buffering ability performed better because it enabled a faster response of the indoor environment to air conditioning.Moreover,a high risk of moisture accumulation between the thermal insulation layer and other materials with a large water vapour transfer resistance factor was also identified,suggesting a higher requirement for the vapour insulation of the envelopes of LTS buildings.
文摘This paper conducts a comprehensive analysis of the export dynamics within the Ukrainian timber industry, emphasizing its pivotal role in the national economy. The study begins by outlining the research objectives, context, and innovative methodologies, setting the stage for a deep dive into the theoretical underpinnings of sustainable and competitive trade. It explores Ukraine’s rich forest biodiversity across varied vegetation zones and its geopolitical significance. Detailed evaluations of forest resource management, policy frameworks, and institutional support form the core of the analysis. Challenges such as imbalanced export structures and legal inconsistencies are critically examined. The research employs trade gravity models and competitive indicators like the Revealed Comparative Advantage (RCA) and Market Share (MS) to assess factors influencing exports and to forecast potential growth areas. The findings inform strategic recommendations aimed at enhancing export capacity through market diversification, brand development, and legal stability. The conclusion highlights the need for strategic interventions to harness Ukraine’s timber resources sustainably, balancing economic gains with environmental stewardship.
基金the Key Technologies R&D Program of Harbin (0111211102).
文摘The paper presents a method of using single neuron adaptive PID control for adjusting system or servo system to implement timber drying process control, which combines the thought of parameter adaptive PID control and the character of neural network on exactly describing nonlinear and uncertainty dynamic process organically. The method implements functions of adaptive and self-learning by adjusting weighting parameters. Adaptive neural network can make some output trail given hoping value to decouple in static state. The simulation result indicates the validity, veracity and robustness of the method used in the timber drying process
基金The National Natural Science Foundation of China(No.51138002,51578127)
文摘The mechanical properties of the monodirectional Gutou mortise-tenon joints of the ancient Chinese traditional timber buildings in the Yangtze River region were studied using the experimental method. Three monodirectional Gutou mortise-tenon joints were designed according to the actual configurations. The failure modes,the hysteretic curves,the skeleton curves, the rotation rigidities, and the energy dissipation capacity of this type of mortise-tenon joints under the low cyclic reversed loading were obtained. The results show that the hysteretic curves of the monodirectional Gutou mortise-tenon joints appear to be Z shape and have obvious pinch effects. During the process of the test,these mortisetenon joints pass orderly through the elastic stage,the yield stage and the failure stage. The energy dissipation capacity of these mortise-tenon joints generally decreases with the increase in the rotation angle. The equivalent viscous damping coefficients of the monodirectional Gutou mortise-tenon joints are between 0. 161 and 0. 193. The results can provide the theoretical base for the computing analysis and repair design of Chinese traditional timber buildings in the Yangtze River region.
文摘This article, by using mathematical expressions, offers a scientific framework for understanding how the grading system of Qing′s structural carpentry determines the design and construction in the grand style timber architecture.The Qing′s grand style timber structure, which is ready for prefabrication and assembly, is extremely hierarchical oriented and significantly standardized. The general procedure in designing a grand style timber structure is to start with the grade that defines the basic module (dou kou); next comes with the number of bracket set (cuan), the number of longitudinal bays and the number of purlins which affect its plan and cross section; thirdly choose a roof type that determines its longitudinal section and the facade as well. A series of formulae are conducted to help depict the layout, cross sectional roof curvature and special longitudinal treatments in 4 sloped and 9 spined roofs respectively.
文摘Beginning in the late 1970’s forest industry timberland gained the eye of financial investors. Diamond International and Crown Zellerbach were early firms that were purchased for the “break-up value” of their timberland. Timberland was perceived as undervalued by investors and made forest industry firms attractive takeover targets. This started a process where forest industry divested of its timberland. Some firms formed separate entities for its timberland base. Acquisitions and mergers became popular in the industry. Some forest industry companies converted to real estate investment trusts, for tax and defensive reasons. Large institutional investors became interested in timberland as means to diversify their portfolios and increase financial performance. Timber management investment organizations developed to manage and procure timberland for these institutional investors. Today little of the forest industry timberland remains with vertically-integrated forest products companies. South Carolina’s forest industry timberland decreased by about 800,000 ha since 1993 (or nearly 90%). This has implications for the state’s timber supply. Forest industry timberlands were some of the most productive and intensively managed forests in the state. We address how forest management might change on this timberland and how long-term timber supply might be impacted in the state.
基金This study was funded by National Natural Science Foundation of China(Grant No.5187082769).
文摘The timber-concrete composite(TCC)slabs have become a preferred choice of floor systems in modern multi story timber buildings.This TCC slab consisted of timber and a concrete slab which were commonly connected together with inclined self-tapping screws(STSs).To more accurately predict the fire performance of TCC slabs,the mechanical behavior of TCC connections under high temperature was investigated by numerical simulation in this study.The interface slip of TCC connections was simulated by a proposed Finite Element(FE)model at room temperature,and different diameter and penetration length screws were considered.The effectiveness of this FE model was validated by comparing with the existing experimental results.Furthermore,the sequentially coupling thermal stress analyses of this model were conducted,and the relationship between the reduction coefficient of connection performance and the effective penetration length of screws was summarized.This study gave the fit-ting expressions for the reduction coefficient of slip modulus and joint strength.Finally,the numerical investiga-tions of the fire performance of TCC slabs considering the char fall-off of Cross Laminated Timber(CLT)were performed to verify the effectiveness of the proposed reduction law.Comparing the fire-resistance time with experimental results showed deviation of the proposed model was−14.02%.
基金the National Natural Science Foundation of China(Nos.51878354&51308301)the Natural Science Foundation of Jiangsu Province(Nos.BK20181402&BK20130978)+1 种基金Six Talent Peak High-Level Projects of Jiangsu Province(No.JZ029)Qinglan Project of Jiangsu Higher Education Institutions and the Ministry of Housing and Urban-Rural Science Project of Jiangsu Province under Grant No.JS2021ZD10。
文摘Fiber reinforced polymer(FRP)has been used in the construction industry because of its advantages such as high strength,light weight,corrosion resistance,low density and high elasticity.This paper presents a review of bonding techniques adopted to strengthen timber beams using FRP to achieve larger spans.Different methods of bonding between FRP and timber beams have been summarized with a focus on the influencing factors and their effects as well as relevant bond-slip models proposed for fundamental understanding.Experimental investigations to evaluate the flexural performance of timber beams strengthened by FRP bars,sheets and wraps have also been critically reviewed to identify key influencing parameters.Limited research available on the shear performance of FRP reinforced timber beams have been analyzed to determine the influencing factors of the shear performance in timber-FRP beams.The paper finally presents an overall summary of the current-state-of-the-art and proposes some future research directions in the field.
文摘This paperprovides a historical overview intending to clarify the methods of interpretation of timber-framed buildings by different authors of construction treatises, and structural intentions of the carpentry designers and master builders, throughout the centuries, until the period when it became scientific structural theory. It describes the ＂box-frame＂ construction that appeared in Lisbon, after the earthquake of 1755, characterized by its good seismic resistance. This knowledge is important to determine a strategy of an efficient restoration practice in historical constructions which require an intervention subordinated to its raised patrimonial and artistic value, minimum, which respects the authenticity of its structural and construction conception and which is reversible and compatible, in physical, chemical, mechanic and aesthetic terms. Empirical understanding of the most important properties of wood to structure purposes, the defects of structural timbers, the framing and the preliminary survey followed by the structural survey were some of the difficulties which can be overcame in practice.
文摘Theoretical study on and safeguarding of cultural landscape heritage has been put on the agenda of heritage protection in Zhejiang and Fujian provinces.The safeguarding of timber-framed arch bridge heritage in the past 5 decades could be classified into 3 stages,and heritage protection in all 3 stages was closely related to original meaning of "landscape",which proved that timber-framed arch bridge heritage had profound inside information,and the safeguarding of timber-framed arch bridge from the perspective of cultural landscape heritage was worth further study.Safeguarding of timber-framed arch bridge cultural landscape heritage focused on integrated conservation,but not protection of individual bridges.Integrated conservation of world heritage is to maintain and restore the integrated environment landscape of the heritage,thus protection of timber-framed arch bridge heritage is not only to explore its architectural craftsmanship,but also to lay a foundation for the dynamic succession of such craftsmanship as intangible cultural heritage.Value of the existing timber-framed arch bridges as historic building heritage was discussed,and it was proposed that ultimate objectives of the safeguarding could be realized step by step from 3 layers.
基金Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2020EEEVL0410National Natural Science Foundation of China under Grant No.51878550Foundation Research Project of Shaanxi Province under Grant No.2021JC-44。
文摘This study investigates the enhanced effect of timber infill walls on the seismic behavior of traditional Chinese timber frames.Two 1/2 scaled traditional Chinese timber infill walls(TIWs),two 1/2 scaled timber frames with timber infill walls(TFTIWs)and one 1/2 scaled timber frame(TF)were fabricated and tested under low-cyclic reversed loading.The failure modes,strength,stiffness,and energy consumption capacity of the TIWs and the TFTIWs were obtained,and the effects of the TIWs on the seismic performance of the TFTIWs were investigated.The results showed that the TIWs can increase the stiffness and ultimate bearing capacity of the TF,up to 60%and 80%,respectively.The strength degradation coefficient of the TFTIWs was slightly higher than that of the TF when the inter-story drift ratio exceeded 0.02 rad,and the TIWs helped to mitigate the strength degradation of the TFTIWs.It was also found that the TFTIWs had a higher cumulative energy dissipation when compared with the TF(up to a 60%increase),indicating the TIWs had reasonably good energy dissipation capacity.When the TIWs generated a solid contribution to the carrying capacity and energy dissipation of the TF,the lateral drift thresholds were 1/100 and 1/43 of the column height,respectively.Furthermore,the TIWs and TFTIWs presented a good ductility,and the TIW could effectively reduce the pull-out amount of the tenon from the mortise of the TF;however,the TIWs had little influence on the stiffness degradation level or improvement of the ductility of the TF.
文摘Cross laminated timber(CLT)is an innovative and environment friendly engineered timber product with superior structural performance.CLT offers strong resistance against both in-plane and out-of-plane loading.Hence,it is widely used as floors,roofs or wall elements.Considerable experimental research on CLT under various loading conditions has been done in the recent past.This article presents a comprehensive review of various design methods to determine basic mechanical properties such as tension,compression and rolling shear strength of CLT with primary focus on Norway spruce.All relevant experimental data available from existing literature were collated and consequently been used to evaluate the performance of various methods to design CLT structures.The comparison revealed that different methods show considerable variance in predicting the capacity of CLT panels due to the variation in timber species,which affects the corresponding mechanical properties of the lamella.In addition to species,rolling shear properties can also vary considerably depending on the type of experimental technique used for testing.A predictive model has also been proposed to correlate rolling shear strength obtained from shear analogy method to that obtained using planar shear.
文摘This study investigated the bending,compression as well as the bonding performance of CLT panels made from fast-growing timber species,i.e.,Laran(Neolamarckia cadamba)and Batai(Paraserianthes falcataria).The variables studied were timber species(Laran and Batai),layers of lamination(3-layer and 5-layer),loading direction in bending(in-plane and out-of-plane),loading direction in compression(x-,y-,and z-axis)and different treatment conditions for bonding performance test.The desired outputs of this study were bending and compression properties(strength and stiffness)as well as bonding performance(block shear strength,wood failure percentage and delamination value).The bending and compression test were conducted according to EN16351:2015 and EN408:2012,respectively.On the other hand,the bonding performance test was determined by block shear and delamination test based on EN16351:2015 and EN14374:2004,respectively.Prior to block shear test,the samples were subjected to three different treatment conditions.The results showed that CLT made from 3-layer Laran timber,loaded at out-of-plane direction exhibited the highest bending properties.Contrarily,CLT made from 5-layered Batai timber,loaded at in-plane direction showed the lowest bending properties.Laran samples for compression loaded at x-axis exhibited the best compressive properties.Generally,Laran CLT showed greater bonding performance determined by shear test compared to Batai CLT for both 3-and 5-layer panels.On the contrary,delamination results showed that Batai CLT demonstrated better bonding performance compared to Laran CLT.In terms of bonding performance measured by wood failure percentage(WFP),most samples under various treatment conditions showed WFP≥80%except for samples under wet condition with WFP≤60%.
基金supported by National Natural Science Foundation of China(Grant Nos.52208253,51878344)Postdoctoral Foundation of Jiangsu Province(Grant No.2021K128B)Jiangsu Funding Program for Excellent Postdoctoral Talent,which are highly appreciated.
文摘This article presents experimental results of steel-timber-steel(STS)joints loaded parallel to grain.Eight groups of specimens were designed,and tensile tests were performed.The fastener types and fastener numbers were considered to evaluate the tensile strengths and ductility performances of the STS joints.The screws with 6 mm diameter and the innovative steel-tubes with 18 mm diameter were adopted as connecting fasteners.The experimental results were discussed in terms of yielding and ultimate strengths,slip stiffness,and ductility factors.The ductility classification and failure mechanisms of each group of specimens were analyzed.It was demonstrated that the STS joint with large diameter steel-tubes showed acceptable ductility,which was close to the ductility of the STS joint with small diameter screws,thanks to the hollow structure of the steel-tube.The theoretical strengths of various failure modes for the joints with small diameter screws or large diameter steel-tubes were calculated and compared with the experimental results.The ductile performance of the STS joint was discussed by comparing the theoretical strengths of various failure modes.The effective number of the STS joint with multifasteners was also analyzed by considering the failure mechanisms in aspects of tensile strength and slip stiffness.
文摘This paper lbcuses on the main characteristics of a tree-shaped timber structural system or simply tree-shaped. One of them is the complexity of its steel connections, responsible for the joint of bar elements, compounding a complex structural system, which requires the application of the CYPECAD software version 2007 to solve the calculations problems. Its efficiency was confirmed by a variety of laboratory tests carried out with the whole structure. The tree-shaped is a timber structure that can be used in a large number of destinations, including residences, malls, sheds, hangars, etc.. Originally, it was conceived based on the well-known masterpiece ＂Sagrada Familia＂, whose author was Architect Antoni Gaudi I Cornet （1852-1926） in Barcelona/Spain. It was designed at the end of 19th century and its construction is still not finished. Gaudi inverted the logical order of the gothic concepts, i.e., light weights below and heavy weights above. Based on this concept, he always had in mind the figure of a tree in nature. The tree-shaped follows the same idea, using timber pieces connected by steel plates. Theoretical and numerical analyses have shown its efficiency and lightness for use in timber structures.
文摘The Emerging Timber Bridge Program to Sao Paulo state （ETBPSP） was started in 2001 with the main objective of research and development of new technologies for timber bridge construction. After five years of this program eleven demonstration timber bridges were constructed in the State of Sao Paulo, whereas eight composite timber/concrete bridges, one log timber girder bridge with transversal sawn deck, one transversal lumber prestressed timber bridge and one transversal cellular plywood box prestressed bridge. As a final objective is the divulgation of the constructive and structural systems in extension courses to municipal engineers and in a complete publication of timber bridges project plans with the different structural and constructional systems. This paper describes the goals of the MTBPSP, the accomplishments of the program in the first five years, the information sheet of the bridges and outlines some obstacles and opportunities.
文摘Two analytical procedures （Crank＇s method and Dincer＇s method） for porous solid materials were reevaluated and used to determine moisture diffusion coefficients and moisture transfer coefficients for larch lumber subjected to drying. A diffusion-like equation was used to describe drying process data. The lumber was idealized in the modeling as infinite plates. The moisture transport process inside the board was assumed to be one-dimensional. The macroscopic drying kinetics curves of larch timber at particular conditions were determined experimentally. Based on these data, calculation for both the moisture diffusion coefficients and moisture transfer coefficients by the Dincer＇s analytical procedure were made. The dynamic moisture diffusion coefficients by the traditional Crank＇s method were calculated. In general, diffusion coefficients calculated by the Dincer＇s method were all higher than those by Crank＇s method. These results could be due to the differences between two analytical methods and also different characteristics between solid moisture diffusion process and heat transfer process. Therefore the analysis and solution procedures of moisture diffusion differential equations need to be adapted in the future. With drying temperature＇s increasing moisture diffusion coefficient （D） and moisture transfer coefficient （k） increases accordingly. Also the relationships between diffusion coefficients and temperature as well as material moisture contents were analyzed by using Arrhenius equation and bound water transport theory.
文摘This study addresses the increasing demand for large-diameter production timber,and considers the time and space variability of half-sib families of Pinus massoniana.Height,diameter at breast height(DBH)and timber volume of 440 open-pollinated half-sib progeny families were investigated in 14 progeny trials in different years and production regions.An evaluation of the genetic variation of all half-sib families was carried out during the sustainable rapid growth period and individual volumes were characterized as a major index.ANOVA analysis showed that there was considerable variance in the growth traits of most families in different years and on different sites.The variations caused by temporal and spatial changes of the mating system required three selection methods for analysis.The results show that there were differences among the heritabilities of different growth traits by different halfsib progenies.Average heritability values of height,DBH and volume were 0.33,0.34 and 0.36,respectively.Fortyfive superior families were selected in every progeny test,12 were selected in progeny trials by different years and five in different habitat progeny trials.Three superior families(Gui GC553A,Gui GC414A and Gui GC431A)were selected,although in different years and production regions.The genetic gains of timber volume of these selected r families ranged from 1.20 to 47.00%,which could provide a foundation for superior wood property selection and serve as material for seed improvement and extension in surrounding areas.
