It is important to understand the relationship between the ambient ebb and flood currents and the electricity generated by tidal stream power generators to minimise investment risk and to optimise power generation for...It is important to understand the relationship between the ambient ebb and flood currents and the electricity generated by tidal stream power generators to minimise investment risk and to optimise power generation for distribution purposes. Such analyses no longer rely on average descriptions of the flow field or on single values for the device efficiency. In the present paper, we demonstrate a new method involving the integration of synthesised long termflow vectors with logistic descriptions of the device power curves. New experiments are then described with the Neptune Proteus vertical axis tidal stream power generator involving tow tests at speeds to 1.5 ms–1 in William Wright Dock on the Humber. The results are used to derive appropriate coefficients in the logisticcurve and to estimate the device’s annual electrical output.展开更多
Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal st...Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal streams. Hence a tidal stream power unit with counter-rotating type horizontal-axis bidirectional propellers is proposed in this paper. The blades with fully-symmetrical hydrofoils were optimized numerically. The output and flow conditions predicted by the computational fluid dynamics simulations are compared with the results of the wind tunnel experiments at the higher tip speed ratios, which are of expected usual operating conditions of this unit. The numerical and experimental results show good agreements. It is also confirmed that the flow discharged from the counter-rotating type propellers has no swirling component, though the single propeller generates the unacceptable swirling component.展开更多
Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ...Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ocean energy source. Unique tandem propellers that can counter-rotate have been designed to generate electric power effectively from a tidal stream. This type of power unit has several advantages compare to the conventional unit with a single propeller. At the design of the tidal stream power unit, it is important to investigate the structure of the tip vortex tubes shedding to predict the load of the propeller. In this research, we investigated the tip vortex shedding using the CFD method for the conventional single propeller and counter-rotating type tandem propellers and estimated the performance efficiency using RANS (Reynolds Averaged Navier-Stokes) model and we confirmed the limitation of RANS model on the calculation of the tip vortex stretching.展开更多
Constructive interference between tidal stream turbines in multi-rotor fence configurations arrayed normally to the flow has been shown analytically, computationally, and experimentally to enhance turbine performance....Constructive interference between tidal stream turbines in multi-rotor fence configurations arrayed normally to the flow has been shown analytically, computationally, and experimentally to enhance turbine performance. The increased resistance to bypass flow due to the presence of neighbouring turbines allows a static pressure difference to develop in the channel and entrains a greater flow rate through the rotor swept area. Exploiting the potential improvement in turbine performance requires that turbines either be operated at higher tip speed ratios or that turbines are redesigned in order to increase thrust. Recent studies have demonstrated that multi-scale flow dynamics, in which a distinction is made between device-scale and fence-scale flow events, have an important role in the physics of flow past tidal turbine fences partially spanning larger channels. Although the reduction in flow rate through the fence as the turbine thrust level increases has been previously demonstrated, the within-fence variation in turbine performance, and the consequences for overall farm performance, is less well understood. The impact of turbine design and operating conditions, on the performance of a multi-rotor tidal fence is investigated using Reynolds-Averaged Navier-Stokes embedded blade element actuator disk simulations. Fences consisting of four, six, and eight turbines are simulated, and it is demonstrated that the combination of device-and fence-scale flow effects gives rise to cross-fence thrust and power variation. These cross-fence variations are also a function of turbine thrust, and hence design conditions,although it is shown simple turbine control strategies can be adopted in order to reduce the cross-fence variations and improve overall fence performance. As the number of turbines in the fence, and hence fence length, increases, it is shown that the turbines may be designed or operated to achieve higher thrust levels than if the turbines were not deployed in a fence configuration.展开更多
文摘It is important to understand the relationship between the ambient ebb and flood currents and the electricity generated by tidal stream power generators to minimise investment risk and to optimise power generation for distribution purposes. Such analyses no longer rely on average descriptions of the flow field or on single values for the device efficiency. In the present paper, we demonstrate a new method involving the integration of synthesised long termflow vectors with logistic descriptions of the device power curves. New experiments are then described with the Neptune Proteus vertical axis tidal stream power generator involving tow tests at speeds to 1.5 ms–1 in William Wright Dock on the Humber. The results are used to derive appropriate coefficients in the logisticcurve and to estimate the device’s annual electrical output.
文摘Tidal stream power units with horizontal-axis propellers are one of promising technologies for generating the renewable green energy. The ebb and flow require that the power unit must operate in bidirectional tidal streams. Hence a tidal stream power unit with counter-rotating type horizontal-axis bidirectional propellers is proposed in this paper. The blades with fully-symmetrical hydrofoils were optimized numerically. The output and flow conditions predicted by the computational fluid dynamics simulations are compared with the results of the wind tunnel experiments at the higher tip speed ratios, which are of expected usual operating conditions of this unit. The numerical and experimental results show good agreements. It is also confirmed that the flow discharged from the counter-rotating type propellers has no swirling component, though the single propeller generates the unacceptable swirling component.
文摘Ocean energy has a potential of providing a large amount of renewable energy around the world. One of the forms of ocean energy, tidal stream power is widely recognized as the continuous, predictable and eco-friendly ocean energy source. Unique tandem propellers that can counter-rotate have been designed to generate electric power effectively from a tidal stream. This type of power unit has several advantages compare to the conventional unit with a single propeller. At the design of the tidal stream power unit, it is important to investigate the structure of the tip vortex tubes shedding to predict the load of the propeller. In this research, we investigated the tip vortex shedding using the CFD method for the conventional single propeller and counter-rotating type tandem propellers and estimated the performance efficiency using RANS (Reynolds Averaged Navier-Stokes) model and we confirmed the limitation of RANS model on the calculation of the tip vortex stretching.
文摘Constructive interference between tidal stream turbines in multi-rotor fence configurations arrayed normally to the flow has been shown analytically, computationally, and experimentally to enhance turbine performance. The increased resistance to bypass flow due to the presence of neighbouring turbines allows a static pressure difference to develop in the channel and entrains a greater flow rate through the rotor swept area. Exploiting the potential improvement in turbine performance requires that turbines either be operated at higher tip speed ratios or that turbines are redesigned in order to increase thrust. Recent studies have demonstrated that multi-scale flow dynamics, in which a distinction is made between device-scale and fence-scale flow events, have an important role in the physics of flow past tidal turbine fences partially spanning larger channels. Although the reduction in flow rate through the fence as the turbine thrust level increases has been previously demonstrated, the within-fence variation in turbine performance, and the consequences for overall farm performance, is less well understood. The impact of turbine design and operating conditions, on the performance of a multi-rotor tidal fence is investigated using Reynolds-Averaged Navier-Stokes embedded blade element actuator disk simulations. Fences consisting of four, six, and eight turbines are simulated, and it is demonstrated that the combination of device-and fence-scale flow effects gives rise to cross-fence thrust and power variation. These cross-fence variations are also a function of turbine thrust, and hence design conditions,although it is shown simple turbine control strategies can be adopted in order to reduce the cross-fence variations and improve overall fence performance. As the number of turbines in the fence, and hence fence length, increases, it is shown that the turbines may be designed or operated to achieve higher thrust levels than if the turbines were not deployed in a fence configuration.
