Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-N...Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-Nb mixed-oxide catalyst was synthesized as an NH_(3)-SCR catalyst for NO_(x)emission control.After the intro-duction of Sn,both the NH_(3)-SCR activity and the hydrothermal stability of the catalyst were remarkably promoted.Even after hydrothermal aging at 1000℃,the developed Ce_(1)Sn_(2)Nb_(1)O_(x)catalyst achieved more than 90%NO_(x)conversion at 325-500℃.Various methods,including N2-physisorption,X-ray diffraction,in-situ high-temperature X-ray diffraction,high-resolution transmission electron microscopy,X-ray pho-toelectron spectroscopy,X-ray absorption fine-structure spectroscopy,temperature-programmed reduc-tion of hydrogen,temperature-programmed desorption of ammonia,and density functional theory calculations were used to investigate the promotional effects induced by the Sn species.The characteri-zation results showed that the addition of Sn not only promoted the formation of the Ce-Nb active phase but also improved its thermal stability,contributing to the excellent NH_(3)-SCR performance and hydrothermal stability.This study provides an excellent sintering-resistance catalyst for the application of diesel engine NO_(x)emission control.展开更多
The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Bas...The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Based on this,the new type of mold flux for La-bearing FeCrAl alloy continuous casting was designed and its basic properties were evaluated.The results showed that the order of reaction degree of fluxing agents in CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags is(Na_(2)O)>(B_(2)O_(3))>(Li_(2)O),and the percentages of mass change of fluxing agents were 85.8,54.29 and 42.35 wt.%,respectively.Moreover,the addition of(Li_(2)O)and(Na_(2)O)promoted the reaction between(CaO)and[Al],and the reaction degree of the former was weaker than that of the latter,which was due to the greater effect of(Na_(2)O)on the activity of(CaO)and(Al_(2)O_(3))than(Li_(2)O).Compared with the reactivity of CaO–SiO_(2)-based slags,the percentages of mass change of Al and La caused by slag–steel reaction decreased by 10.63–14.36 and 39.78–50.49 wt.%,respectively.The percentages of mass change of(Al_(2)O_(3)),(La_(2)O_(3))and(CaO)in slags highest increased by 17.71,17.98,and 7.81 wt.%,respectively.The reactivity of CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags was significantly weakened.Ultimately,the new type of mold flux was designed and the composition range was determined.The fundamental properties of new mold flux basically meet the theoretical requirements for La-bearing FeCrAl alloy continuous casting.展开更多
Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several chall...Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several challenges must be overcome before they can be widely used.This paper reviews in detail the tailoring of microstructure from the aspect of process parameters,the updated knowledge gained in microstructure(crystallographic orientation,high-resolution interfacial structures)and the latest means of optimizing eutectic microstructure(seed-induced method,introducing low-energy grain boundaries and high-entropy phase).Additionally,the paper explores future techniques for the fabrication of bulk ceramic materials and effective toughening approaches.This review highlights the achievements made especially in the last 15 years,current limitations in Al_(2)O_(3)-based eutectic ceramics,and offers comprehensive insights and strategic guidance for further mechanical breakthroughs.展开更多
To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.Thi...To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.This produced chemically bonded interacting composite photocatalysts of FA-SiO,and graphitic-phase carbon nitride(g-C_(3)N_(4)).Compared with the spherical silicon dioxide prepared using tetraethyl orthosilicate(TEOS-SiO_(2)),the mesoporous structure of FA-SiO_(2),allowed DCDA to react in a smaller space,which facilitated the transformation of DCDA to melamine by the thermal degradation kinetics of FA-C_(3)N_(4)/DCDA.This ultimately boosted the formation of an N-atom-removed triazine ring structure and a multistage structure combining lumps and rods in the composite photocatalysts of g-C_(3)N_(4),and FA-SiO_(2),which led to a higher visible-light utilization efficiency,a suitable valence-band position,and the photocatalytic activity for methylene blue reaching 3.56 times that of g-C_(3)N_(4).The findings indicate that mesoporous FA-SiO,has the potential to improve the structural and photocatalytic properties of g-C_(3)N_(4),-based materials.展开更多
The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and pro...The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and properties,it has resulted in the development of various particle sizes and shapes of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials.This has led to the extension of the uses of the materials to photocatalysis,drug delivery,and CT image contrast agents.Accordingly,these applications have been compiled and discussed in depth in this review.The potential of these materials in the above applications has started to attract significant attention.Moreover,the compilation of in-vitro toxicity studies from the literature was also discussed to facilitate the biocompatibility of the developed Gd(OH)_(3)nanomaterials.However,despite the rapid progress of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials,there are still knowledge gaps in certain areas.Therefore,this review provides insights into the recent development of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials to aid in accelerating novel developments.展开更多
The interaction of MgO-MgAl_(2)O_(4)-based and MgO-Cr_(2)O_(3)-based refractories with X70 molten steel was studied by immersion experiments at 1560℃.The effects of immersion time(30 and 60 min)on the contents of tot...The interaction of MgO-MgAl_(2)O_(4)-based and MgO-Cr_(2)O_(3)-based refractories with X70 molten steel was studied by immersion experiments at 1560℃.The effects of immersion time(30 and 60 min)on the contents of total oxygen(TO),Al,Nb,Si,Mn,and Cr as well as the composition,number density,and size distribution of inclusions in the molten steel were investigated.The influence of the penetration and erosion degree of the molten steel to the refractory on the steel-refractory interface layer was analyzed.The results show that,at 1560℃,the MgO-MgAl_(2)O_(4)-based refractory can better control the contents of TO and the composition of molten steel compared with the MgO-Cr_(2)O_(3)-based refractory.The TO content is only 16×10^(-4) wt.%in the molten steel after reacted with the Mg0-MgAl_(2)O_(4)-based refractory at the end point of refining,4 accounting for 11.5%of that reacted with the MgO-Cr_(2)O_(3)-based refractory(139×10^(-4) wt.%).The number density of inclusions is only 14 mm^(-2),and the average size ofinclusions is only 1.31μm,with thelargest proportion of inclusions in 1-2μm(70%).The Al_(2)O_(3)-MnS-CaO complex inclusions in the original steel changed to complex inclusions dominated by Cr-Nb-Mn-S-O and MgO.Al_(2)O_(3),corresponding to the MgO-Cr_(2)O_(3)-based and MgO-MgAl_(2)O_(4)-based refractories,respectively.The MgO.Al_(2)O_(3) layer was formed at the reaction interface between MgO-MgAl_(2)O_(4)-based refractory and molten steel,which is helpful to restrict the erosion of refractories and the pollution of molten steel.The damage mechanism of the MgO-Cr_(2)O_(3)-based refractory is mainly permeation and chemical reaction,while the damage of the MgO-MgAl_(2)O_(4)-based refractory is mainlyscouring erosion.展开更多
Photocatalysis as an emerging "green" energy conversion technology has attracted domestic and international attention.This technology uses semiconductor photocatalysts to convert solar energy into directly u...Photocatalysis as an emerging "green" energy conversion technology has attracted domestic and international attention.This technology uses semiconductor photocatalysts to convert solar energy into directly usable chemical energy,showing great potential for application in environmental pollutant purification and clean energy production,with broad development prospects.Among many semiconductor materials,tungsten trioxide(WO_(3)) is favored by researchers in the field of photocatalysis because of its good visible light response and excellent valence band hole oxidation properties.Currently,a large number of photocatalysts based on WO_(3),in particular W03-based composite photocatalysts,have been reported,and their applications cover a wide range of fields.In order to promote the development of WO_(3)-based photocatalysts and provide a reference for colleagues,we present a systematic summary of the applications and research progress of W03-based composites in the field of photocatalysis in recent years.Starting from the structural properties of WO_(3)itself,this article summarizes the preparation methods and structure-activity relationships of WO_(3)-based composite photocatalysts.Subsequently,it introduces the current application status of existing WO_(3)-based composite photocatalysts in CO_(2) reduction,hydrogen production,nitrogen fixation,and pollutant removal.Finally,the development prospects were analyzed.展开更多
Predictive modeling of photocatalytic NO removal is highly desirable for efficient air pollution abatement.However,great challenges remain in precisely predicting photocatalytic performance and understanding interacti...Predictive modeling of photocatalytic NO removal is highly desirable for efficient air pollution abatement.However,great challenges remain in precisely predicting photocatalytic performance and understanding interactions of diverse features in the catalytic systems.Herein,a dataset of g-C_(3) N_(4)-based catalysts with 255 data points was collected from peer-reviewed publications and machine learning(ML)model was proposed to predict the NO removal rate.The result shows that the Gradient Boosting Decision Tree(GBDT)demonstrated the greatest prediction accuracy with R 2 of 0.999 and 0.907 on the training and test data,respectively.The SHAP value and feature importance analysis revealed that the empirical categories for NO removal rate,in the order of importance,were catalyst characteristics>reaction process>preparation conditions.Moreover,the partial dependence plots broke the ML black box to further quantify the marginal contributions of the input features(e.g.,doping ratio,flow rate,and pore volume)to the model output outcomes.This ML approach presents a pure data-driven,interpretable framework,which provides new insights into the influence of catalyst characteristics,reaction process,and preparation conditions on NO removal.展开更多
Reticulated ceramic foam filters provide an effective way to purify molten steel by removing non-metallic inclusions.We proposed a novel strategy to improve the purification performance of Al_(2)O_(3)-based ceramic fi...Reticulated ceramic foam filters provide an effective way to purify molten steel by removing non-metallic inclusions.We proposed a novel strategy to improve the purification performance of Al_(2)O_(3)-based ceramic filters by using microporous corundum-spinel raw materials to replace dense raw materials.Three kinds of Al_(2)O_(3)-based ceramic filters fabricated from dense α-Al_(2)O_(3) micro-powder or microporous corundum-spinel powder were selected to carry out the immersion tests with molten steel.On the one hand,the higher surface roughness of the filter skeleton prepared from microporous raw materials increased the adsorption capacity of skeleton surface on inclusions in molten steel.On the other hand,the higher apparent porosity and larger pore size of the filter skeleton were more beneficial to the penetration of molten steel in the micropores of skeleton.The reaction process at the solid-liquid interface also improved the wettability of the interface between skeleton and molten steel,resulting in a larger penetration depth and a better adsorption effect on the inclusions.In summary,the novel Al_(2)O_(3)-based ceramic filter prepared with microporous corundum-spinel powder and addition of 5 wt.% nano-Al_(2)O_(3) powder reduced the total oxygen content of the steel from 40.2×10^(-4) to 12.7×10^(-4) wt.% by 68.4% and the Al content from 0.46 to 0.18 wt.% by 60.9% after immersion test,presenting the most excellent purification performance on molten steel.展开更多
High performance X8R dielectric ceramics were prepared by dopingBi2O3 to BaTiO3-based ceramics.The effect of small amounts（≤1.2 mol%） ofBi2O3 additive on the microstructure and dielectric properties of BaTiO3-based...High performance X8R dielectric ceramics were prepared by dopingBi2O3 to BaTiO3-based ceramics.The effect of small amounts（≤1.2 mol%） ofBi2O3 additive on the microstructure and dielectric properties of BaTiO3-based ceramics have been investigated.The Bi2O3 ,acting as a sintering additive,can effectively lower the sintering temperature of BaTiO3-based ceramics from 1300 to 1130 °C.The bulk density of BaTiO3-based ceramics increased and reached the maximum value with increasingBi2O3 content.The dielectric constant increased with increasingBi2O3 until it reached the maximum value with 0.8 mol%Bi2O3 additive,and the dielectric loss decreased with increasingBi2O3 content.Optimal dielectric properties of ε=2470,tanδ=0.011 and △ε/ε 25 ≤±9%（-55-150 °C） were obtained for the BaTiO3-based ceramics doped with 0.8 mol%Bi2O3 sintered at 1130 °C for 6 h.展开更多
Cs_(x)WO_(3)/TiO_(2) composites with full-spectrum catalytic activity were prepared by solvothermal reaction.The composites were characterized using X-ray diffraction(XRD)analysis,scanning electron microscopy(SEM),tra...Cs_(x)WO_(3)/TiO_(2) composites with full-spectrum catalytic activity were prepared by solvothermal reaction.The composites were characterized using X-ray diffraction(XRD)analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),specific surface area testing,X-ray photoelectron spectroscopy(XPS),and UV-Vis diffuse reflectance spectra(UV-Vis DRS).Cs_(x)WO_(3) and TiO_(2) were uniformly bonded together in the compos-ites.The heterojunction structure was formed.The band gap was reduced from 2.75 to 2.65 eV.The photocatalytic property of Cs_(x)WO_(3)/TiO_(2)was demonstrated by the degradation rates of 20 mg·L^(-1) methylene blue dye,which were 99.7%,91.4%,and 70.7%under irradiation from a 300 W high-pressure mercury lamp,a 500 W xenon lamp,and a 400 W infrared lamp,respectively.After five cycles of photocatalytic degradation,the composite photocatalyst still showed a degradation efficiency of 87.6%.This indicates that Cs_(x)WO_(3)/TiO_(2) has good photocatalytic degradability and cyclic stability.The photocatalytic mechanism of Cs_(x)WO_(3)/TiO_(2)was investigated.The trapping experiments of the active species showed that the main active substances were the empty hole(h+)and hydroxyl radical(·OH).展开更多
基于密度泛函理论的第一性原理计算研究了Ba1-xCaxTiO3(BCT,x=0,0.125,0.200,0.250,0.333,0.500)陶瓷的电子结构、介电、压电性及相关机理。研究发现,BCT陶瓷的带隙宽度随Ca2+掺杂量的增大先降后升,在x=0.125处取得最小值1.693 e V。光...基于密度泛函理论的第一性原理计算研究了Ba1-xCaxTiO3(BCT,x=0,0.125,0.200,0.250,0.333,0.500)陶瓷的电子结构、介电、压电性及相关机理。研究发现,BCT陶瓷的带隙宽度随Ca2+掺杂量的增大先降后升,在x=0.125处取得最小值1.693 e V。光子能量为0 e V时纯Ba Ti O3陶瓷的相对介电常数εr为5.957,在2.523 e V时εr达到峰值8.522。Ca2+掺杂量增大使其室温相对介电常数与介电损耗均减小,在x=0.500处,介电损耗在光子能量为3.447 e V时呈现峰值4.403。其态密度图谱表明原子之间的杂化使其压电性更稳定,其压电应变常数d33和压电应力常数e33在x=0.250处分别达到极大值99.8 p C/N和29.34 C/m2,微量Ca2+掺杂使Ba Ti O3陶瓷的室温压电性提高,两相共存区域正交相与四方相之间的耦合是其高压电性的关键因素。展开更多
The compositional flexibility and structural stability of SrTiO_(3)-based perovskite oxides present a promising approach to tailor their electrical and thermal transport properties.In this work,a series of(Ca_(0.25)Nd...The compositional flexibility and structural stability of SrTiO_(3)-based perovskite oxides present a promising approach to tailor their electrical and thermal transport properties.In this work,a series of(Ca_(0.25)Nd_(0.25)Sr_(0.35)Ba_(0.15))1-xTiO_(3)±δceramics with varying A-site deficiencies were designed by integrating entropy engineering and defect chemistry,and their microstructural characteristics and transport properties were systematically investigated.All samples exhibited a stable single-phase Pm3m cubic structure with uniformly distributed constituent elements.The introduction of A-site vacancies created favorable pathways for ion diffusion during the sintering process and facilitated grain growth.A-site deficiencies significantly increased carrier concentration by promoting the formation of oxygen vacancies and Ti^(3+),while also enhancing carrier mobility by improving structural symmetry and reducing grain boundary scattering,leading to the improved power factor.The multiscale defects resulting from entropy engineering including point defects,strain fields,and high-density grain boundaries contributed to the reduced thermal conductivity of all samples.By synergistically optimizing the entropy and defect engineering,the sample with x=0.09 achieved a peak figure of merit(ZT)of 0.21 at 900 K,representing a 32%enhancement compared with that of the x=0.03 sample.This work underscores the significance of the combined strategy of entropy engineering and defect chemistry in manipulating the transport properties of SrTiO_(3)-based thermoelectric oxides.展开更多
The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The in...The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The increase in the CaO/Al2O3 ratio from 1 to 2 lowered the viscosity of the flux melts. The viscosity increased slightly with the CaO/Al2O3 ratio from 2 to 3, and this increase became significant with further increasing CaO/Al2O3 ratio to 4. Both break temperature and apparent activation energy were found to be increased with the increase in CaO/Al2O3 ratio from 2 to 4. There was no break temperature available in the flux with CaO/Al2O3 ratio of 1. Changing the CaO/Al2O3 ratio from 1 to 2 decreased the apparent activation energy. Equilibrium phases of the fluxes were calculated using FactSage 7.1 and the major phases were found to be varied with the CaO/Al2O3 ratio. Structures of tested mould fluxes were analysed using Fourier transform infrared spectroscopy. The results showed that the increase in the CaO/Al2O3 ratio from 1 to 2 decreased the complexity of the structure, leading to a reduced viscosity. With the increase in the CaO/Al2O3 ratio from 2 to 4, both solid phase precipitation and melt structure contributed to the variation of viscosity.展开更多
A new technology was developed to recover multiple valuable elements from the spent Al2O3-based catalyst by X-ray phase analysis and exploratory experiments. The experimental results show that in the condition of roas...A new technology was developed to recover multiple valuable elements from the spent Al2O3-based catalyst by X-ray phase analysis and exploratory experiments. The experimental results show that in the condition of roasting temperature of 750℃ and roasting time of 30 min, molar ratio of Na2O to Al2O3 of 1.2, the leaching rates of alumina, vanadium and molybdenum in the spent catalyst are 97.2%, 95.8% and 98.9%, respectively. Vanadium and molybdenum in sodium aluminate solution can be recovered by precipitators A and B, and the precipitation rates of vanadium and molybdenum are 94.8% and 92.6%. Al（OH）3 was prepared from sodium aluminate solution in the carbonation decomposition process, and the purity of Al2O3 is 99.9% after calcination, the recovery of alumina reaches 90.6% in the whole process; the Ni-Co concentrate was leached by sulfuric acid, a nickel recovery of 98.2% and cobalt recovery over 98.5% can be obtained under the experimental condition of 30% H2SO4, 80℃, reaction time 4 h, mass ratio of liquid to solid 8, stirring rate 800r/min.展开更多
(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly l...(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly limit their applications.Here,<00l>textured Nb5+-doped 0.8(Bi_(0.5)Na_(0.5))TiO_(3)–0.2(Bi_(0.5)K_(0.5))TiO_(3)(0.8BNT–0.2BKT)ceramics with a high degree of texturing(~80%)were prepared by the reactive template grain growth(RTGG)method using Bi4Ti3O12 as a template.By the combination of donor doping in the B-site and the RTGG method,the electrostrain performance achieves a significant enhancement.A high electrostrain of 0.65%and a piezoelectric coefficient(*33 d)of 1083 pm/V with reduced hysteresis at an electric field of 6 kV/mm are obtained.No electrostrain performance degradation is observed after unipolar electric field loading of 10^(5)cycles,showing excellent fatigue endurance.These results indicate that the texturing BNT-based lead-free piezoceramics by the RTGG method is a useful approach to developing eco-friendly actuators.展开更多
Because of the discrete charge storage mechanism, charge trapping memory（CTM） technique is a good candidate for aerospace and military missions. The total ionization dose（TID） effects on CTM cells with Al2O3/HfO2/...Because of the discrete charge storage mechanism, charge trapping memory（CTM） technique is a good candidate for aerospace and military missions. The total ionization dose（TID） effects on CTM cells with Al2O3/HfO2/Al2O3（AHA） high-k gate stack structure under in-situ 10 keV x-rays are studied. The C-V characteristics at different radiation doses demonstrate that charge stored in the device continues to be leaked away during the irradiation,thereby inducing the shift of flat band voltage（V（fb））. The dc memory window shows insignificant changes, suggesting the existence of good P/E ability. Furthermore, the physical mechanisms of TID induced radiation damages in AHA-based CTM are analyzed.展开更多
(Ba, Sr)RuO3 has been paid an attention as a promising electrode for (Ba, Sr)TiO3 dielectric material due to its similarity in structure and chemical composition with BST. In this study, (Ba, Sr)RuO3 conductive oxide ...(Ba, Sr)RuO3 has been paid an attention as a promising electrode for (Ba, Sr)TiO3 dielectric material due to its similarity in structure and chemical composition with BST. In this study, (Ba, Sr)RuO3 conductive oxide film was deposited on a 4 inch p-type Si wafer by metal organic chemical vapor deposition (MOCVD) using single cocktail source for the practical device application. Ba(TMHD)2, Sr(TMHD)2, Ru(TMHD)3 precursors and solvent [1-EtylePiPerdine (C7H15 N) ] as starting materials were mixed together for single cocktail source. A liquid delivery system (LDS) and a vaporization cell were utilized for the delivery and vaporization of single cocktail source, respectively. The source feeding rate was controlled by a liquid mass flow controller (LMFC). Deposition parameters, such as the oxygen flow and the source flow rate,were sensitive to phase formation, resistivity and the composition ratio of (Ba, Sr)RuO3 films. Highly (110)-textured (Ba,Sr)RuO3 film was obtained vhen the Ar/O2 ratio was 200/140 sccm at a source flow rate of 0.05 sccm. The process window of stoichiometric composition of BSR film was observed with varying the source flow rate from 0.05 sccm to 0.1 sccm.展开更多
Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning...Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning electron microscopy in combination with energy dispersive spectrometry. Mechanical properties, such as transverse rupture strength, hardness and fracture toughness, were measured. The results show that there are black core-grey rim structure and white core-grey rim structure in the microstructure. The grains become fine due to the VC/Cr3C2, and the grains of cermet added with 0.75VC/0.25Cr3C2 are refined most remarkably. The black core becomes finer with the increase of VC addition and rim phase becomes thicker with the decrease of Cr3C2 addition. The porosity increases with the increase of VC addition in VC/Cr3C2. Compared with the cermet free of VC/Cr3C2, the transverse rupture strength and hardness of cermets with VC/Cr3C2 are both improved, and the maximum values are both found for the cermet with 0.25VC/0.75Cr3C2. The fracture toughness can be effectively promoted by adding VC/Cr3C2 with an appropriate ratio of VC to Cr3C2, and the maximum value is found for the cermet with 0.5VC/0.5Cr3C2.展开更多
基金supported by the National Natural Science Foundation of China(52225004 and 22276202)the National Key Research and Development Program of China(2022YFC3701804)the Youth Innovation Promotion Association of Chinese Academy of Sciences(2019045).
文摘Catalytic activity and hydrothermal stability are both crucial for the application of the selective catalytic reduction of NO_(x)with NH_(3)(NH_(3)-SCR)catalyst in diesel vehicles.In this study,a tin(Sn)-modified Ce-Nb mixed-oxide catalyst was synthesized as an NH_(3)-SCR catalyst for NO_(x)emission control.After the intro-duction of Sn,both the NH_(3)-SCR activity and the hydrothermal stability of the catalyst were remarkably promoted.Even after hydrothermal aging at 1000℃,the developed Ce_(1)Sn_(2)Nb_(1)O_(x)catalyst achieved more than 90%NO_(x)conversion at 325-500℃.Various methods,including N2-physisorption,X-ray diffraction,in-situ high-temperature X-ray diffraction,high-resolution transmission electron microscopy,X-ray pho-toelectron spectroscopy,X-ray absorption fine-structure spectroscopy,temperature-programmed reduc-tion of hydrogen,temperature-programmed desorption of ammonia,and density functional theory calculations were used to investigate the promotional effects induced by the Sn species.The characteri-zation results showed that the addition of Sn not only promoted the formation of the Ce-Nb active phase but also improved its thermal stability,contributing to the excellent NH_(3)-SCR performance and hydrothermal stability.This study provides an excellent sintering-resistance catalyst for the application of diesel engine NO_(x)emission control.
基金supported by the National Natural Science Foundation of China(Grant Nos.52174321,52274339 and 52074186).
文摘The reaction behavior between CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags and La-bearing FeCrAl melt was quantitatively characterized,which was further compared with the reaction behavior of CaO–SiO_(2)-based slags.Based on this,the new type of mold flux for La-bearing FeCrAl alloy continuous casting was designed and its basic properties were evaluated.The results showed that the order of reaction degree of fluxing agents in CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags is(Na_(2)O)>(B_(2)O_(3))>(Li_(2)O),and the percentages of mass change of fluxing agents were 85.8,54.29 and 42.35 wt.%,respectively.Moreover,the addition of(Li_(2)O)and(Na_(2)O)promoted the reaction between(CaO)and[Al],and the reaction degree of the former was weaker than that of the latter,which was due to the greater effect of(Na_(2)O)on the activity of(CaO)and(Al_(2)O_(3))than(Li_(2)O).Compared with the reactivity of CaO–SiO_(2)-based slags,the percentages of mass change of Al and La caused by slag–steel reaction decreased by 10.63–14.36 and 39.78–50.49 wt.%,respectively.The percentages of mass change of(Al_(2)O_(3)),(La_(2)O_(3))and(CaO)in slags highest increased by 17.71,17.98,and 7.81 wt.%,respectively.The reactivity of CaO–Al_(2)O_(3)–La_(2)O_(3)-based slags was significantly weakened.Ultimately,the new type of mold flux was designed and the composition range was determined.The fundamental properties of new mold flux basically meet the theoretical requirements for La-bearing FeCrAl alloy continuous casting.
基金financially supported by the National Natural Science Foundation of China(No.52171046)National Natural Science Foundation of China-key programme(No.52234010)the Fundamental Research Funds for the Central Universities and Shaanxi Provincial Key Science and Technology Innovation Team(No.2023-CX-TD-14).
文摘Al_(2)O_(3)-based eutectic ceramics are considered as promising candidates for ultra-high-temperature structural materials due to their exceptional thermal stability and mechanical properties.Nonetheless,several challenges must be overcome before they can be widely used.This paper reviews in detail the tailoring of microstructure from the aspect of process parameters,the updated knowledge gained in microstructure(crystallographic orientation,high-resolution interfacial structures)and the latest means of optimizing eutectic microstructure(seed-induced method,introducing low-energy grain boundaries and high-entropy phase).Additionally,the paper explores future techniques for the fabrication of bulk ceramic materials and effective toughening approaches.This review highlights the achievements made especially in the last 15 years,current limitations in Al_(2)O_(3)-based eutectic ceramics,and offers comprehensive insights and strategic guidance for further mechanical breakthroughs.
基金supported by the Medical Special Cultivation Project of Anhui University of Science and Technology(Nos.YZ2023H2B013 and YZ2023H2B012),China.
文摘To explore high value-added utilization pathways of fly ash,the mesoporous structure of silicon dioxide extracted from fly ash(FA-SiO_(2))was utilized to restrict the dicyandiamide(DCDA)thermal degradation process.This produced chemically bonded interacting composite photocatalysts of FA-SiO,and graphitic-phase carbon nitride(g-C_(3)N_(4)).Compared with the spherical silicon dioxide prepared using tetraethyl orthosilicate(TEOS-SiO_(2)),the mesoporous structure of FA-SiO_(2),allowed DCDA to react in a smaller space,which facilitated the transformation of DCDA to melamine by the thermal degradation kinetics of FA-C_(3)N_(4)/DCDA.This ultimately boosted the formation of an N-atom-removed triazine ring structure and a multistage structure combining lumps and rods in the composite photocatalysts of g-C_(3)N_(4),and FA-SiO_(2),which led to a higher visible-light utilization efficiency,a suitable valence-band position,and the photocatalytic activity for methylene blue reaching 3.56 times that of g-C_(3)N_(4).The findings indicate that mesoporous FA-SiO,has the potential to improve the structural and photocatalytic properties of g-C_(3)N_(4),-based materials.
基金the FRC grant(UBD/RSCH/1.4/FICBF(b)/2023/059)received from Universiti Brunei Darussalam,Brunei Darussalam。
文摘The syntheses of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials have been reported and these materials have been developed as excellent MRI contrast agents.Due to the close interrelation between their morphology and properties,it has resulted in the development of various particle sizes and shapes of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials.This has led to the extension of the uses of the materials to photocatalysis,drug delivery,and CT image contrast agents.Accordingly,these applications have been compiled and discussed in depth in this review.The potential of these materials in the above applications has started to attract significant attention.Moreover,the compilation of in-vitro toxicity studies from the literature was also discussed to facilitate the biocompatibility of the developed Gd(OH)_(3)nanomaterials.However,despite the rapid progress of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials,there are still knowledge gaps in certain areas.Therefore,this review provides insights into the recent development of Gd(OH)_(3)and Gd(OH)_(3)-based nanomaterials to aid in accelerating novel developments.
基金support from the National Natural Science Foundation of China(Grant Nos.U1860205 and 52204352)Youth Project of Hubei Natural Science Foundation(Grant No.2022CFB593)+1 种基金Key R&D Project of Hubei Province(Grant No.2022BAA021)Guiding Project of Scientific Research Plan of Hubei Provincial Department of Education(Grant No.B2022019).
文摘The interaction of MgO-MgAl_(2)O_(4)-based and MgO-Cr_(2)O_(3)-based refractories with X70 molten steel was studied by immersion experiments at 1560℃.The effects of immersion time(30 and 60 min)on the contents of total oxygen(TO),Al,Nb,Si,Mn,and Cr as well as the composition,number density,and size distribution of inclusions in the molten steel were investigated.The influence of the penetration and erosion degree of the molten steel to the refractory on the steel-refractory interface layer was analyzed.The results show that,at 1560℃,the MgO-MgAl_(2)O_(4)-based refractory can better control the contents of TO and the composition of molten steel compared with the MgO-Cr_(2)O_(3)-based refractory.The TO content is only 16×10^(-4) wt.%in the molten steel after reacted with the Mg0-MgAl_(2)O_(4)-based refractory at the end point of refining,4 accounting for 11.5%of that reacted with the MgO-Cr_(2)O_(3)-based refractory(139×10^(-4) wt.%).The number density of inclusions is only 14 mm^(-2),and the average size ofinclusions is only 1.31μm,with thelargest proportion of inclusions in 1-2μm(70%).The Al_(2)O_(3)-MnS-CaO complex inclusions in the original steel changed to complex inclusions dominated by Cr-Nb-Mn-S-O and MgO.Al_(2)O_(3),corresponding to the MgO-Cr_(2)O_(3)-based and MgO-MgAl_(2)O_(4)-based refractories,respectively.The MgO.Al_(2)O_(3) layer was formed at the reaction interface between MgO-MgAl_(2)O_(4)-based refractory and molten steel,which is helpful to restrict the erosion of refractories and the pollution of molten steel.The damage mechanism of the MgO-Cr_(2)O_(3)-based refractory is mainly permeation and chemical reaction,while the damage of the MgO-MgAl_(2)O_(4)-based refractory is mainlyscouring erosion.
基金financially supported by the National Natural Science Foundation of China (No.22376051)the China Postdoctoral Science Foundation (Nos.2021T140512 and 2020M680869)the Natural Science Foundation of Hebei Province (No.B2021202001)。
文摘Photocatalysis as an emerging "green" energy conversion technology has attracted domestic and international attention.This technology uses semiconductor photocatalysts to convert solar energy into directly usable chemical energy,showing great potential for application in environmental pollutant purification and clean energy production,with broad development prospects.Among many semiconductor materials,tungsten trioxide(WO_(3)) is favored by researchers in the field of photocatalysis because of its good visible light response and excellent valence band hole oxidation properties.Currently,a large number of photocatalysts based on WO_(3),in particular W03-based composite photocatalysts,have been reported,and their applications cover a wide range of fields.In order to promote the development of WO_(3)-based photocatalysts and provide a reference for colleagues,we present a systematic summary of the applications and research progress of W03-based composites in the field of photocatalysis in recent years.Starting from the structural properties of WO_(3)itself,this article summarizes the preparation methods and structure-activity relationships of WO_(3)-based composite photocatalysts.Subsequently,it introduces the current application status of existing WO_(3)-based composite photocatalysts in CO_(2) reduction,hydrogen production,nitrogen fixation,and pollutant removal.Finally,the development prospects were analyzed.
基金supported by the National Natural Science Foundation of China(Nos.22172019,22225606,22176029)Excellent Youth Foundation of Sichuan Scientific Committee Grant in China(No.2021JDJQ0006).
文摘Predictive modeling of photocatalytic NO removal is highly desirable for efficient air pollution abatement.However,great challenges remain in precisely predicting photocatalytic performance and understanding interactions of diverse features in the catalytic systems.Herein,a dataset of g-C_(3) N_(4)-based catalysts with 255 data points was collected from peer-reviewed publications and machine learning(ML)model was proposed to predict the NO removal rate.The result shows that the Gradient Boosting Decision Tree(GBDT)demonstrated the greatest prediction accuracy with R 2 of 0.999 and 0.907 on the training and test data,respectively.The SHAP value and feature importance analysis revealed that the empirical categories for NO removal rate,in the order of importance,were catalyst characteristics>reaction process>preparation conditions.Moreover,the partial dependence plots broke the ML black box to further quantify the marginal contributions of the input features(e.g.,doping ratio,flow rate,and pore volume)to the model output outcomes.This ML approach presents a pure data-driven,interpretable framework,which provides new insights into the influence of catalyst characteristics,reaction process,and preparation conditions on NO removal.
基金financially supported by the National Natural Science Foundation of China(Grant No.51974214).
文摘Reticulated ceramic foam filters provide an effective way to purify molten steel by removing non-metallic inclusions.We proposed a novel strategy to improve the purification performance of Al_(2)O_(3)-based ceramic filters by using microporous corundum-spinel raw materials to replace dense raw materials.Three kinds of Al_(2)O_(3)-based ceramic filters fabricated from dense α-Al_(2)O_(3) micro-powder or microporous corundum-spinel powder were selected to carry out the immersion tests with molten steel.On the one hand,the higher surface roughness of the filter skeleton prepared from microporous raw materials increased the adsorption capacity of skeleton surface on inclusions in molten steel.On the other hand,the higher apparent porosity and larger pore size of the filter skeleton were more beneficial to the penetration of molten steel in the micropores of skeleton.The reaction process at the solid-liquid interface also improved the wettability of the interface between skeleton and molten steel,resulting in a larger penetration depth and a better adsorption effect on the inclusions.In summary,the novel Al_(2)O_(3)-based ceramic filter prepared with microporous corundum-spinel powder and addition of 5 wt.% nano-Al_(2)O_(3) powder reduced the total oxygen content of the steel from 40.2×10^(-4) to 12.7×10^(-4) wt.% by 68.4% and the Al content from 0.46 to 0.18 wt.% by 60.9% after immersion test,presenting the most excellent purification performance on molten steel.
基金supported by the Tianjin Natural Science Foundation, China (Grant No. 06YFJMJC01000)
文摘High performance X8R dielectric ceramics were prepared by dopingBi2O3 to BaTiO3-based ceramics.The effect of small amounts（≤1.2 mol%） ofBi2O3 additive on the microstructure and dielectric properties of BaTiO3-based ceramics have been investigated.The Bi2O3 ,acting as a sintering additive,can effectively lower the sintering temperature of BaTiO3-based ceramics from 1300 to 1130 °C.The bulk density of BaTiO3-based ceramics increased and reached the maximum value with increasingBi2O3 content.The dielectric constant increased with increasingBi2O3 until it reached the maximum value with 0.8 mol%Bi2O3 additive,and the dielectric loss decreased with increasingBi2O3 content.Optimal dielectric properties of ε=2470,tanδ=0.011 and △ε/ε 25 ≤±9%（-55-150 °C） were obtained for the BaTiO3-based ceramics doped with 0.8 mol%Bi2O3 sintered at 1130 °C for 6 h.
文摘Cs_(x)WO_(3)/TiO_(2) composites with full-spectrum catalytic activity were prepared by solvothermal reaction.The composites were characterized using X-ray diffraction(XRD)analysis,scanning electron microscopy(SEM),transmission electron microscopy(TEM),specific surface area testing,X-ray photoelectron spectroscopy(XPS),and UV-Vis diffuse reflectance spectra(UV-Vis DRS).Cs_(x)WO_(3) and TiO_(2) were uniformly bonded together in the compos-ites.The heterojunction structure was formed.The band gap was reduced from 2.75 to 2.65 eV.The photocatalytic property of Cs_(x)WO_(3)/TiO_(2)was demonstrated by the degradation rates of 20 mg·L^(-1) methylene blue dye,which were 99.7%,91.4%,and 70.7%under irradiation from a 300 W high-pressure mercury lamp,a 500 W xenon lamp,and a 400 W infrared lamp,respectively.After five cycles of photocatalytic degradation,the composite photocatalyst still showed a degradation efficiency of 87.6%.This indicates that Cs_(x)WO_(3)/TiO_(2) has good photocatalytic degradability and cyclic stability.The photocatalytic mechanism of Cs_(x)WO_(3)/TiO_(2)was investigated.The trapping experiments of the active species showed that the main active substances were the empty hole(h+)and hydroxyl radical(·OH).
文摘基于密度泛函理论的第一性原理计算研究了Ba1-xCaxTiO3(BCT,x=0,0.125,0.200,0.250,0.333,0.500)陶瓷的电子结构、介电、压电性及相关机理。研究发现,BCT陶瓷的带隙宽度随Ca2+掺杂量的增大先降后升,在x=0.125处取得最小值1.693 e V。光子能量为0 e V时纯Ba Ti O3陶瓷的相对介电常数εr为5.957,在2.523 e V时εr达到峰值8.522。Ca2+掺杂量增大使其室温相对介电常数与介电损耗均减小,在x=0.500处,介电损耗在光子能量为3.447 e V时呈现峰值4.403。其态密度图谱表明原子之间的杂化使其压电性更稳定,其压电应变常数d33和压电应力常数e33在x=0.250处分别达到极大值99.8 p C/N和29.34 C/m2,微量Ca2+掺杂使Ba Ti O3陶瓷的室温压电性提高,两相共存区域正交相与四方相之间的耦合是其高压电性的关键因素。
基金supported by the National Natural Science Foundation of China(No.52130203)the Natural Science Foundation of Shandong Province(No.ZR2022QB159).
文摘The compositional flexibility and structural stability of SrTiO_(3)-based perovskite oxides present a promising approach to tailor their electrical and thermal transport properties.In this work,a series of(Ca_(0.25)Nd_(0.25)Sr_(0.35)Ba_(0.15))1-xTiO_(3)±δceramics with varying A-site deficiencies were designed by integrating entropy engineering and defect chemistry,and their microstructural characteristics and transport properties were systematically investigated.All samples exhibited a stable single-phase Pm3m cubic structure with uniformly distributed constituent elements.The introduction of A-site vacancies created favorable pathways for ion diffusion during the sintering process and facilitated grain growth.A-site deficiencies significantly increased carrier concentration by promoting the formation of oxygen vacancies and Ti^(3+),while also enhancing carrier mobility by improving structural symmetry and reducing grain boundary scattering,leading to the improved power factor.The multiscale defects resulting from entropy engineering including point defects,strain fields,and high-density grain boundaries contributed to the reduced thermal conductivity of all samples.By synergistically optimizing the entropy and defect engineering,the sample with x=0.09 achieved a peak figure of merit(ZT)of 0.21 at 900 K,representing a 32%enhancement compared with that of the x=0.03 sample.This work underscores the significance of the combined strategy of entropy engineering and defect chemistry in manipulating the transport properties of SrTiO_(3)-based thermoelectric oxides.
文摘The effects of CaO/Al2O3 ratio on viscosity and structure of the CaO-Al2O3-based fluoride-free mould fluxes were investigated with the CaO/Al2O3 ratio varied from 1 to 4 and the content of SiO2 fixed at 7 wt.%. The increase in the CaO/Al2O3 ratio from 1 to 2 lowered the viscosity of the flux melts. The viscosity increased slightly with the CaO/Al2O3 ratio from 2 to 3, and this increase became significant with further increasing CaO/Al2O3 ratio to 4. Both break temperature and apparent activation energy were found to be increased with the increase in CaO/Al2O3 ratio from 2 to 4. There was no break temperature available in the flux with CaO/Al2O3 ratio of 1. Changing the CaO/Al2O3 ratio from 1 to 2 decreased the apparent activation energy. Equilibrium phases of the fluxes were calculated using FactSage 7.1 and the major phases were found to be varied with the CaO/Al2O3 ratio. Structures of tested mould fluxes were analysed using Fourier transform infrared spectroscopy. The results showed that the increase in the CaO/Al2O3 ratio from 1 to 2 decreased the complexity of the structure, leading to a reduced viscosity. With the increase in the CaO/Al2O3 ratio from 2 to 4, both solid phase precipitation and melt structure contributed to the variation of viscosity.
基金Project(2003 UDBEA00C020) supported by the Collaborative Project of School and Province of Yunnan Province
文摘A new technology was developed to recover multiple valuable elements from the spent Al2O3-based catalyst by X-ray phase analysis and exploratory experiments. The experimental results show that in the condition of roasting temperature of 750℃ and roasting time of 30 min, molar ratio of Na2O to Al2O3 of 1.2, the leaching rates of alumina, vanadium and molybdenum in the spent catalyst are 97.2%, 95.8% and 98.9%, respectively. Vanadium and molybdenum in sodium aluminate solution can be recovered by precipitators A and B, and the precipitation rates of vanadium and molybdenum are 94.8% and 92.6%. Al（OH）3 was prepared from sodium aluminate solution in the carbonation decomposition process, and the purity of Al2O3 is 99.9% after calcination, the recovery of alumina reaches 90.6% in the whole process; the Ni-Co concentrate was leached by sulfuric acid, a nickel recovery of 98.2% and cobalt recovery over 98.5% can be obtained under the experimental condition of 30% H2SO4, 80℃, reaction time 4 h, mass ratio of liquid to solid 8, stirring rate 800r/min.
基金supported by the National Natural Science Foundation of China(52172135)the Youth Top Talent Project of the National“Ten Thousand Talents Program”(2021-527-07)the Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholars(2021B1515020083 and 2022B1515020070).
文摘(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly limit their applications.Here,<00l>textured Nb5+-doped 0.8(Bi_(0.5)Na_(0.5))TiO_(3)–0.2(Bi_(0.5)K_(0.5))TiO_(3)(0.8BNT–0.2BKT)ceramics with a high degree of texturing(~80%)were prepared by the reactive template grain growth(RTGG)method using Bi4Ti3O12 as a template.By the combination of donor doping in the B-site and the RTGG method,the electrostrain performance achieves a significant enhancement.A high electrostrain of 0.65%and a piezoelectric coefficient(*33 d)of 1083 pm/V with reduced hysteresis at an electric field of 6 kV/mm are obtained.No electrostrain performance degradation is observed after unipolar electric field loading of 10^(5)cycles,showing excellent fatigue endurance.These results indicate that the texturing BNT-based lead-free piezoceramics by the RTGG method is a useful approach to developing eco-friendly actuators.
基金Supported by the National Natural Science Foundation of China under Grant No 616340084the Youth Innovation Promotion Association of Chinese Academy of Sciences under Grant No 2014101+1 种基金the International Cooperation Project of Chinese Academy of Sciencesthe Austrian-Chinese Cooperative R&D Projects under Grant No 172511KYSB20150006
文摘Because of the discrete charge storage mechanism, charge trapping memory（CTM） technique is a good candidate for aerospace and military missions. The total ionization dose（TID） effects on CTM cells with Al2O3/HfO2/Al2O3（AHA） high-k gate stack structure under in-situ 10 keV x-rays are studied. The C-V characteristics at different radiation doses demonstrate that charge stored in the device continues to be leaked away during the irradiation,thereby inducing the shift of flat band voltage（V（fb））. The dc memory window shows insignificant changes, suggesting the existence of good P/E ability. Furthermore, the physical mechanisms of TID induced radiation damages in AHA-based CTM are analyzed.
文摘(Ba, Sr)RuO3 has been paid an attention as a promising electrode for (Ba, Sr)TiO3 dielectric material due to its similarity in structure and chemical composition with BST. In this study, (Ba, Sr)RuO3 conductive oxide film was deposited on a 4 inch p-type Si wafer by metal organic chemical vapor deposition (MOCVD) using single cocktail source for the practical device application. Ba(TMHD)2, Sr(TMHD)2, Ru(TMHD)3 precursors and solvent [1-EtylePiPerdine (C7H15 N) ] as starting materials were mixed together for single cocktail source. A liquid delivery system (LDS) and a vaporization cell were utilized for the delivery and vaporization of single cocktail source, respectively. The source feeding rate was controlled by a liquid mass flow controller (LMFC). Deposition parameters, such as the oxygen flow and the source flow rate,were sensitive to phase formation, resistivity and the composition ratio of (Ba, Sr)RuO3 films. Highly (110)-textured (Ba,Sr)RuO3 film was obtained vhen the Ar/O2 ratio was 200/140 sccm at a source flow rate of 0.05 sccm. The process window of stoichiometric composition of BSR film was observed with varying the source flow rate from 0.05 sccm to 0.1 sccm.
基金Project (090414185) supported by the Natural Science Foundation of Anhui Province, China
文摘Effects of VC/Cr3C2 on the microstructure and mechanical properties of Ti（C,N）-based cermets were studied. The microstructure was investigated by means of optical microscopy, X-ray diffractometry as well as scanning electron microscopy in combination with energy dispersive spectrometry. Mechanical properties, such as transverse rupture strength, hardness and fracture toughness, were measured. The results show that there are black core-grey rim structure and white core-grey rim structure in the microstructure. The grains become fine due to the VC/Cr3C2, and the grains of cermet added with 0.75VC/0.25Cr3C2 are refined most remarkably. The black core becomes finer with the increase of VC addition and rim phase becomes thicker with the decrease of Cr3C2 addition. The porosity increases with the increase of VC addition in VC/Cr3C2. Compared with the cermet free of VC/Cr3C2, the transverse rupture strength and hardness of cermets with VC/Cr3C2 are both improved, and the maximum values are both found for the cermet with 0.25VC/0.75Cr3C2. The fracture toughness can be effectively promoted by adding VC/Cr3C2 with an appropriate ratio of VC to Cr3C2, and the maximum value is found for the cermet with 0.5VC/0.5Cr3C2.
