期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
Metal–organic framework derived hierarchical porous TiO_2 nanopills as a super stable anode for Na-ion batteries 被引量:1
1
作者 Huan Li Zhiguo Zhang +3 位作者 Xiao Huang Tongbin Lan Mingdeng Wei Tingli Ma 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2017年第4期667-672,共6页
Hierarchical porous TiOnanopills were synthesized using a titanium metal-organic framework MIL-125(Ti) as precursor. The as-synthesized TiOnanopills owned a large specific surface area of 102 m/g and unique porous s... Hierarchical porous TiOnanopills were synthesized using a titanium metal-organic framework MIL-125(Ti) as precursor. The as-synthesized TiOnanopills owned a large specific surface area of 102 m/g and unique porous structure. Furthermore, the obtained TiOnanopills were applied as anode materials for Na-ion batteries for the first time. The as-synthesized TiOnanopills achieved a high discharge capacity of 196.4 m Ah/g at a current density of 0.1 A/g. A discharge capacity of 115.9 m Ah/g was obtained at a high current density of 0.5 A/g and the capacity retention was remained as high as 90% even after 3000 cycles. The excellent electrochemical performance can be attributed to its unique hierarchical porous feature. 展开更多
关键词 hierarchical porous structure tio2 nanopills Metal–organic framework Na-ion batteries
在线阅读 下载PDF
TiO_2纳米棒-ZnO纳米片分级结构的制备及光电性能 被引量:2
2
作者 孙宝 张赛 +4 位作者 苏子亭 郝彦忠 杜静文 裴娟 李英品 《功能材料》 EI CAS CSCD 北大核心 2018年第9期9020-9026,共7页
采用两步水热法在无种子层的基础上制备了新颖的TiO_2纳米棒-ZnO纳米片分级结构。采用旋涂辅助连续离子反应方法分别在TiO_2纳米棒阵列和TiO_2纳米棒-ZnO纳米片分级结构中沉积窄禁带半导体光敏剂CdS纳米晶,形成CdS/TiO_2纳米棒复合膜和C... 采用两步水热法在无种子层的基础上制备了新颖的TiO_2纳米棒-ZnO纳米片分级结构。采用旋涂辅助连续离子反应方法分别在TiO_2纳米棒阵列和TiO_2纳米棒-ZnO纳米片分级结构中沉积窄禁带半导体光敏剂CdS纳米晶,形成CdS/TiO_2纳米棒复合膜和CdS/TiO_2-ZnO分级纳米结构复合膜。利用SEM、TEM、XRD、紫外-可见吸收光谱、瞬态光电流图谱等分析手段对样品的形貌结构以及电极的光吸收和光电性能进行了表征和测试。结果表明,沉积光敏层CdS后,TiO2纳米棒-ZnO纳米片分级纳米结构膜的瞬态光电流明显高于TiO_2纳米棒阵列膜,尤其是在500nm处光电响应出现明显增强;以P3HT为p型聚合物材料组装杂化太阳电池,光伏性能测试结果表明,以P3HT/CdS/TiO_2-ZnO分级结构复合膜制备的杂化太阳电池能量转换效率可达0.65%,与P3HT/CdS/TiO2复合膜制备的杂化太阳电池的能量转换效率相比提高了58%。 展开更多
关键词 水热法 tio2纳米棒-zno纳米片分级结构 旋涂辅助连续离子反应法 CDS纳米晶 光电性能
在线阅读 下载PDF
Novel Bi2MoO6 Nanosheets/Vertical TiO2 Nanorods Arrays Heterojunction with Enhanced Photoelectrochemical Performance under Visible Light Irradiation
3
作者 高翔 薛佳伟 +4 位作者 罗英 朱晓娣 孙松 鲍骏 汪文栋 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2017年第5期576-580,I0002,共6页
Novel Bi2MoO6/TiO2 heterojunction was fabricated by growing Bi2MoO6 nanosheets arrays on the vertically aligned TiO2 nanorods arrays via a two-step solvothermal method. The obtained Bi2MoO6/TiO2 hierarchical heterojun... Novel Bi2MoO6/TiO2 heterojunction was fabricated by growing Bi2MoO6 nanosheets arrays on the vertically aligned TiO2 nanorods arrays via a two-step solvothermal method. The obtained Bi2MoO6/TiO2 hierarchical heterojunction showed excellent visible light photoelectrochemical performance. Compared with the pure TiO2 and Bi2MoO6, the photocurrent density of the heterojunction was increased 57 and 29 times, respectively. Furthermore, the hydrogen generation rate of the Bi2MoO6/TiO2 for photoelectrocatalytic water-splitting was about 6 times higher than that of the pure Bi2MoO6. The improved performance can be attributed to the synergistic effects of enhanced absorption of visible light, increase of migration rate and separation efficiency of photo-induced carriers. 展开更多
关键词 Bi2MoO6/tio2 hierarchical structure Photoelectrocatalytic water-splitting Visible light
在线阅读 下载PDF
g-C_(3)N_(4)量子点-TiO_(2)/导电凹凸棒石复合材料的制备及其光催化性能 被引量:5
4
作者 左士祥 曹晓曼 +4 位作者 吴红叶 刘文杰 李霞章 姚超 吴凤芹 《复合材料学报》 EI CAS CSCD 北大核心 2021年第8期2706-2714,共9页
通过水热法在导电凹凸棒石(C-ATP)表面原位生长TiO_(2)纳米棒制得毛虫状结构的TiO_(2)/C-ATP复合材料,然后以TiO_(2)/C-ATP为载体,在TiO_(2)纳米棒表面进一步复合g-C_(3)N_(4)量子点(CNQD)成功制备了多级结构的CNQD-TiO_(2)/C-ATP异质... 通过水热法在导电凹凸棒石(C-ATP)表面原位生长TiO_(2)纳米棒制得毛虫状结构的TiO_(2)/C-ATP复合材料,然后以TiO_(2)/C-ATP为载体,在TiO_(2)纳米棒表面进一步复合g-C_(3)N_(4)量子点(CNQD)成功制备了多级结构的CNQD-TiO_(2)/C-ATP异质结光催化材料。利用XRD、FTIR、SEM/TEM、紫外-可见吸收光谱(UV-VisDRS)、荧光发射光谱(PL)、BET比表面积分析仪和光电化学等技术对样品进行表征。在可见光照射下,考察了样品对盐酸四环素(TC)的光催化降解能力。结果表明:与TiO_(2)/C-ATP和CNQD相比,CNQD-TiO_(2)/CATP大幅提高了可见光响应、吸收能力和光生电子-空穴对的分离效率。当光照时间为120 min时,CNQDTiO_(2)/C-ATP对TC去除率可达88%。 展开更多
关键词 导电凹凸棒石 tio_(2)纳米棒 g-C_(3)N_(4)量子点 多级结构 光催化性能
原文传递
Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al_2O_3 and Co-Mo-Ni/TiO_2-Al_2O_3 Catalysts 被引量:7
5
作者 刘超 周志明 +2 位作者 黄永利 程振民 袁渭康 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第4期383-391,共9页
A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonate... A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization (in moderate conditions:200 &#176;C, 12 h) of red liquor solids, a by-product of paper-making process. The prepared sulfonated cata-lyst (SC) had aromatic structure, composed of carbon enriched inner core, and oxygen-containing (SO3H, COOH, OH) groups enriched surface. The SO3H, COOH, OH groups amounted to 0.74 mmol·g^-1, 0.78 mmol·g^-1, 2.18 mmol·g^-1, respectively. The fresh SC showed much higher catalytic activity than that of the traditional solid acid catalysts (strong-acid 732 cation exchange resin, hydrogen type zeolite socony mobile-five (HZSM-5), sulfated zir-conia) in esterification of oleic acid. SC was deactivated during the reactions, through the mechanisms of leaching of sulfonated species and formation of sulfonate esters. Two regeneration methods were developed, and the catalytic activity can be mostly regenerated by regeneration Method 1 and be fully regenerated by regeneration Method 2, respectively. 展开更多
关键词 HYDRODESULFURIZAtioN SUPPORT hierarchically macro-/mesoporous structure AL2O3 tio2-Al2O3
在线阅读 下载PDF
Electrochemical Fabrication of rGO-embedded Ag-TiO2 Nanoring/Nanotube Arrays for Plasmonic Solar Water Splitting 被引量:2
6
作者 Lixia Sang Lei Lei Clemens Burda 《Nano-Micro Letters》 SCIE EI CAS CSCD 2019年第4期674-689,共16页
Effective utilization of hot electrons generated from the decay of surface plasmon resonance in metal nanoparticles is conductive to improve solar water splitting efficiency.Herein,Ag nanoparticles and reduced graphen... Effective utilization of hot electrons generated from the decay of surface plasmon resonance in metal nanoparticles is conductive to improve solar water splitting efficiency.Herein,Ag nanoparticles and reduced graphene oxide(rGO)co-decorated hierarchical TiO2 nanoring/nanotube arrays(TiO2 R/T)were facilely fabricated by using two-step electrochemical anodization,electrodeposition,and photoreduction methods.Comparative studies were conducted to elucidate the effects of rGO and Ag on the morphology,photoresponse,charge transfer,and photoelectric properties of TiO2.Firstly,scanning electron microscope images confirm that the Ag nanoparticles adhered on TiO2 R/T and TiO2 R/T-rGO have similar diameter of 20 nm except for TiO2 R-rGO/T.Then,the UV-Vis DRS and scatter spectra reveal that the optical property of the Ag-TiO2 R/T-rGO ternary composite is enhanced,ascribing to the visible light absorption of plasmonic Ag nanoparticles and the weakening effect of rGO on light scattering.Meanwhile,intensity-modulated photocurrent spectroscopy and photoluminescence spectra demonstrate that rGO can promote the hot electrons transfer from Ag nanoparticles to Ti substrate,reducing the photogenerated electron-hole recombination.Finally,Ag-TiO2 R/T-rGO photoanode exhibits high photocurrent density(0.98 mA cm?2)and photovoltage(0.90 V),and the stable H2 evolution rate of 413μL h?1 cm?2 within 1.5 h under AM 1.5 which exceeds by 1.30 times than that of pristine TiO2 R/T.In line with the above results,this work provides a reliable route synergizing rGO with plasmonic metal nanoparticles for photocatalysis,in which,rGO presents a broad absorption spectrum and effective photogenerated electrons transfer. 展开更多
关键词 tio2 nanoring/nanotube hierarchical structure Reduced graphene oxide Spectral RESPONSES PLASMONIC Ag nanoparticles Water SPLITTING
在线阅读 下载PDF
分级多孔结构Bi2WO6/TiO2纳米材料的生物模板法制备及其光催化性能 被引量:1
7
作者 王争一 白莉 +1 位作者 林鑫辰 冯威 《吉林建筑大学学报》 2019年第2期39-49,共11页
本文以玉米秸秆为生物模板,高温焙烧制备了具有玉米秸秆分级多孔结构的纯相二氧化钛(TiO2),再通过水热法制备了钨酸铋(Bi2WO6)/二氧化钛(TiO2)复合催化材料.运用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电... 本文以玉米秸秆为生物模板,高温焙烧制备了具有玉米秸秆分级多孔结构的纯相二氧化钛(TiO2),再通过水热法制备了钨酸铋(Bi2WO6)/二氧化钛(TiO2)复合催化材料.运用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及紫外可见(UV-vis)漫反射等手段对催化材料的组成和微观结构进行了表征分析.结果表明,通过高温焙烧法制备的样品为纯相锐钛矿型TiO2,TiO2表面呈片状结构,通过多孔道相互联结形成多孔蜂窝结构,Bi2WO6呈花球状附着在TiO2表面,形成Bi2WO6/TiO2复合材料.以氙灯为光源,采用罗丹明B作为光催化降解污染物评价复合催化材料的光催化性能.结果表明:相较于纯相TiO2材料,Bi2WO6/TiO2复合材料在可见光下表现出对罗丹明B较好的催化活性.在氙灯光照射120min后,采用模板法制备的Bi2WO6/TiO2对罗丹明B的降解率高于无模板制备的Bi2WO6/TiO2复合材料,分别为99.3%和81.7%.在Bi2WO6/TiO2掺杂比为1∶2时,复合光催化材料表现出的光催化活性最好,并且在溶液pH=6、复合光催化材料投加量为0.4g时降解效果最佳.复合催化剂的光催化活性的提高主要由于Bi2WO6和TiO2形成了异质结构,提高了光生电子-空穴对的分离效率. 展开更多
关键词 生物模板 玉米秸秆 二氧化钛(tio2) 钨酸铋(Bi2WO6) 分级多孔结构 光催化
在线阅读 下载PDF
Hierarchical structure engineering of brookite TiO2 crystals for enhanced photocatalytic and external antitumor property
8
作者 Zhifei He Yonghua Su +4 位作者 Shuang Yang Long Wu Shengyou Liu Changquan Ling Huagui Yang 《Science Bulletin》 SCIE EI CAS CSCD 2016年第23期1818-1825,共8页
Here we report a hydrothermal approach to build and tailor the hierarchical structure of brookite TiO_2 crystal under multiple hierarchical scales. Benefiting from the hierarchical structure and the existence of oxyge... Here we report a hydrothermal approach to build and tailor the hierarchical structure of brookite TiO_2 crystal under multiple hierarchical scales. Benefiting from the hierarchical structure and the existence of oxygen vacancy,these as-prepared hierarchical brookite TiO_2 crystals can not only enhance photocatalytic activity, but also demonstrate their potential in the treatment of superficial malignant tumor. 展开更多
关键词 hierarchical structure. Oxygen vacancyBrookite tio2 Photocatalytic degradation Antitumor property
原文传递
Micro-scale hierarchical photoanode for quantum-dot-sensitized solar cells based on Ti02 nanowires
9
作者 Heng LI Wei JING +1 位作者 Dapeng YU Qing ZHAO 《Frontiers of Optoelectronics》 CSCD 2016年第1期53-59,共7页
This paper proposed a new architecture design for nanowire-based quantum-dot-sensitized solar cells to improve the photovoltaic performance. Microstructured rough substrate was used to increase the surface area of the... This paper proposed a new architecture design for nanowire-based quantum-dot-sensitized solar cells to improve the photovoltaic performance. Microstructured rough substrate was used to increase the surface area of the photoanode without influence on charge carrier transport in the system. Compared to conventional devices, the short circuit current density and power conversion efficiency were enhanced by 50%. And the technology can be widely used in the photoelectroehemical (PEC) field, and it can be combined with other hierarchical nanostructures. 展开更多
关键词 quantum-dot-sensitized solar cell (QDSSC) hierarchical structure tio2 nanowires
原文传递
A titanium dioxide nanorod array as a high-affinity nano-bio interface of a microfluidic device for efficient capture of circulating tumor cells 被引量:3
10
作者 Jichuan Qiu Kun Zhao +7 位作者 Linlin Li Xin Yu Weibo Guo Shu Wang Xiaodi Zhang Caofeng Pan Zhong Lin Wang Hong Liu 《Nano Research》 SCIE EI CAS CSCD 2017年第3期776-784,共9页
Nanomaterials show promising opportunities to address clinical problems (such as insufficient capture of circulating tumor cells; CTCs) via the high surface area-to-volume ratio and high affinity for biological cell... Nanomaterials show promising opportunities to address clinical problems (such as insufficient capture of circulating tumor cells; CTCs) via the high surface area-to-volume ratio and high affinity for biological cells. However, how to apply these nanomaterials as a nano-bio interface in a microfluidic device for efficient CTC capture with high specificity remains a challenge. In the present work, we first found that a titanium dioxide (TiO2) nanorod array that can be conveniently prepared on multiple kinds of substrates has high affinity for tumor cells. Then, the TiO2 nanorod array was vertically grown on the surface of a microchannel with hexagonally patterned Si micropillars via a hydrothermal reaction, forming a new kind of a micro-nano 3D hierarchically structured microfluidic device. The vertically grown TiO2 nanorod array was used as a sensitive nano-bio interface of this 3D hierarchically structured microfluidic device, which showed high efficiency of CTC capture (76.7% ± 7.1%) in an artificial whole-blood sample. 展开更多
关键词 tio2 nanorod array circulating tumor cell microfluidic device nano-bio interface 3D hierarchical structure
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部