In this study,an acid-induced assembly strategy for a rutile TiO2 photocatalyst was proposed on the basis of the treatment of lamellar protonated titanate with a concentrated HNO3 solution.Nitrate groups were successf...In this study,an acid-induced assembly strategy for a rutile TiO2 photocatalyst was proposed on the basis of the treatment of lamellar protonated titanate with a concentrated HNO3 solution.Nitrate groups were successfully grafted onto a TiO2 surface and induced the assembly of rutile TiO2 nanorods into uniform spindle-like nanobundles.The resulting TiO2 product achieved a photocatalytic hydrogen evolution rate of 402.4μmol h^?1,which is 3.1 times higher than that of Degussa P25-TiO2.It was demonstrated that nitrate group grafting caused the rutile TiO2 surface to become negatively charged,which is favorable for trapping positive protons and improving charge carrier separation,thereby enhancing photocatalytic hydrogen production.Additionally,surface charges were crucial to structural stability based on electrostatic repulsion.This study not only developed a facile surface modification strategy for fabricating efficient H2 production photocatalysts but also identified an influence mechanism of inorganic acids different from that reported in the literature.展开更多
Lattice‐doping and surface decoration are prospective routes to improve the visible‐light photocatalytic ability of TiO2,but the two techniques are difficult to combine into one preparation process because they are ...Lattice‐doping and surface decoration are prospective routes to improve the visible‐light photocatalytic ability of TiO2,but the two techniques are difficult to combine into one preparation process because they are usually conducted under different conditions,which limits the efficiency of TiO2 modification.In this study,TiO2 was successfully modified by simultaneous lattice‐doping and surface decoration,and the visible‐light photocatalytic capacity was largely improved.Upon comparing the method reported here with previous ones,the most significant difference is that Fe(II)‐phenanthroline was first used as the co‐precursor of the introduced elements of C,N,and Fe.These three elements were simultaneously introduced to TiO2 at high levels by this co‐precursor method.The as‐synthesized photocatalysts were systemically investigated and analyzed by several characterization methods such as XRD,FT‐IR,XPS,Raman spectroscopy,EPR,UV‐Vis DRS,photoluminescence spectra,photocurrent,electrochemical impedance spectra,TEM,and HRTEM.The photocatalytic degradation of 4‐NP under visible‐light irradiation was used to evaluate the photocatalytic activity of the photocatalysts.Based on the experimental data,a probable mechanism for the photocatalytic degradation by the photocatalysts is proposed.This is a novel method of using one source to simultaneously introduce metal and non‐metal elements to TiO2 at high levels,which may provide a new way to prepare highly effective TiO2 photocatalysts.展开更多
文摘采用溶胶-凝胶法制备高活性Ti基纳米TiO2-ZrO2膜电极.通过X射线衍射分析表明,纳米TiO2-ZrO2粉体呈微-纳二级结构.扫描电子显微镜测试表明,颗粒平均尺寸约为30 nm.通过循环伏安和恒电流电解技术研究发现,Ti/nanoTiO2-ZrO2电极对马来酸电催化还原制备丁二酸的活性要高于Ti/nanoTiO2电极,反应过程受扩散控制.以钛基氧化钌电极为阳极,Ti/nano TiO2-ZrO2膜电极为阴极进行恒电流电解实验.结果表明,控制电流密度20 mA cm-2,温度60℃,丁二酸的产率达到96%.
基金supported by the National Natural Science Foundation of China (21771070, 21571071)the Fundamental Research Funds for the Central Universities (2018KFYYXJJ120, 2019KFYRCPY104)~~
文摘In this study,an acid-induced assembly strategy for a rutile TiO2 photocatalyst was proposed on the basis of the treatment of lamellar protonated titanate with a concentrated HNO3 solution.Nitrate groups were successfully grafted onto a TiO2 surface and induced the assembly of rutile TiO2 nanorods into uniform spindle-like nanobundles.The resulting TiO2 product achieved a photocatalytic hydrogen evolution rate of 402.4μmol h^?1,which is 3.1 times higher than that of Degussa P25-TiO2.It was demonstrated that nitrate group grafting caused the rutile TiO2 surface to become negatively charged,which is favorable for trapping positive protons and improving charge carrier separation,thereby enhancing photocatalytic hydrogen production.Additionally,surface charges were crucial to structural stability based on electrostatic repulsion.This study not only developed a facile surface modification strategy for fabricating efficient H2 production photocatalysts but also identified an influence mechanism of inorganic acids different from that reported in the literature.
基金supported by the National Natural Science Foundation of China(51368044,51568051,51668046)the National Science Fund for Excellent Young Scholars(51422807)+6 种基金the Science and Technology Supporting Program of Jiangxi Province(20151BBG70018)the Natural Science Foundation of Jiangxi Province for Distinguished Young Scholars(20162BCB23041)the Science Foundation for Young Scientists of Jiangxi Province-Key Project(20171ACB21034)the Science and Technology Project of Jiangxi Provincial Education Department(GJJ160700)the Natural Science Foundation of Jiangxi Province(20161BAB216102)the Jiangxi Province Educational Reform Project(JXJG-16-8-7)the Nanchang Hangkong University Educational Reform Project(JY1604,JY1605,KCPY-1511)~~
文摘Lattice‐doping and surface decoration are prospective routes to improve the visible‐light photocatalytic ability of TiO2,but the two techniques are difficult to combine into one preparation process because they are usually conducted under different conditions,which limits the efficiency of TiO2 modification.In this study,TiO2 was successfully modified by simultaneous lattice‐doping and surface decoration,and the visible‐light photocatalytic capacity was largely improved.Upon comparing the method reported here with previous ones,the most significant difference is that Fe(II)‐phenanthroline was first used as the co‐precursor of the introduced elements of C,N,and Fe.These three elements were simultaneously introduced to TiO2 at high levels by this co‐precursor method.The as‐synthesized photocatalysts were systemically investigated and analyzed by several characterization methods such as XRD,FT‐IR,XPS,Raman spectroscopy,EPR,UV‐Vis DRS,photoluminescence spectra,photocurrent,electrochemical impedance spectra,TEM,and HRTEM.The photocatalytic degradation of 4‐NP under visible‐light irradiation was used to evaluate the photocatalytic activity of the photocatalysts.Based on the experimental data,a probable mechanism for the photocatalytic degradation by the photocatalysts is proposed.This is a novel method of using one source to simultaneously introduce metal and non‐metal elements to TiO2 at high levels,which may provide a new way to prepare highly effective TiO2 photocatalysts.
