The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount...The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.展开更多
This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investig...This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investigated the treatment of simulated dye wastewater with UV/TiO2 by changing TiO2 dosages,TiO2 particle sizes and dye concentrations.The efficiency was measured by color removal and TOC removal.The optimum conditions obtained for treatment of different dye wastewater were different.The treatment of Indanthrene red(FBB) by UV/TiO2 was the best,with 99.68% of TOC removal percentage and nearly 100% of color removal while treatment of FBL with 96.11% of TOC removal and almost 100% of color removal.The removal efficiency was lowest for S-RL dye solution with 81.88% of TOC and 95.87% for color removal.Both Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model(modified L-H model) were fitted to the experimental data and were able to correlate the adsorption patterns and the kinetics of the dyes studied.Since the photocatalysts(TiO2) used were nano-sized powder and is difficult to separate from the wastewater,the second part of this research focuses on the preparation of TiO2-film on glass-substrate and the treatment of simulated FBL dye wastewater by UV/TiO2-film oxidation then followed.The experimental results showed the TiO2-films are suitable only for the dye wastewater treatment in low concentration.展开更多
The synergistic effect of H_3PMo_(12)O_(40) or H_3PW_(12)O_(40) polyoxometalate solution(POM) and TiO_2 to catalyze formic acid oxidation was investigated. Under UV irradiation, hole and electron were photogenerated b...The synergistic effect of H_3PMo_(12)O_(40) or H_3PW_(12)O_(40) polyoxometalate solution(POM) and TiO_2 to catalyze formic acid oxidation was investigated. Under UV irradiation, hole and electron were photogenerated by TiO_2. Formic acid was oxided by the photogenerated hole and photogenerated electron was transferred to reduce polyoxometalate. With this design, formic acid can be converted into electricity in the fuel cell and hydrogen can be generated in the electrolysis cell without noble metal catalyst. Unlike other noble metal catalysts applied in the fuel cells and electrolysis cell, POM and TiO_2 are stable and low cost. The maximum output power density of liquid formic acid fuel cell after 12 h UV irradiation is 5.21 mW/cm^2 for phosphmolybdic acid and 22.81 m W/cm^2 for phosphotungstic acid respectively. The applied potential for the hydrogen evolution is as low as 0.8 V for phosphmolybdic acid and 0.6 V for phosphotungstic acid.展开更多
基金Project supported by the Science Project of Harbin City(No. H2001-12)the Youth Foundation of School of Municipal and Environmental Engineering in Harbin Institute of Technology(No. 01306914).
文摘The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.
文摘This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investigated the treatment of simulated dye wastewater with UV/TiO2 by changing TiO2 dosages,TiO2 particle sizes and dye concentrations.The efficiency was measured by color removal and TOC removal.The optimum conditions obtained for treatment of different dye wastewater were different.The treatment of Indanthrene red(FBB) by UV/TiO2 was the best,with 99.68% of TOC removal percentage and nearly 100% of color removal while treatment of FBL with 96.11% of TOC removal and almost 100% of color removal.The removal efficiency was lowest for S-RL dye solution with 81.88% of TOC and 95.87% for color removal.Both Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model(modified L-H model) were fitted to the experimental data and were able to correlate the adsorption patterns and the kinetics of the dyes studied.Since the photocatalysts(TiO2) used were nano-sized powder and is difficult to separate from the wastewater,the second part of this research focuses on the preparation of TiO2-film on glass-substrate and the treatment of simulated FBL dye wastewater by UV/TiO2-film oxidation then followed.The experimental results showed the TiO2-films are suitable only for the dye wastewater treatment in low concentration.
文摘The synergistic effect of H_3PMo_(12)O_(40) or H_3PW_(12)O_(40) polyoxometalate solution(POM) and TiO_2 to catalyze formic acid oxidation was investigated. Under UV irradiation, hole and electron were photogenerated by TiO_2. Formic acid was oxided by the photogenerated hole and photogenerated electron was transferred to reduce polyoxometalate. With this design, formic acid can be converted into electricity in the fuel cell and hydrogen can be generated in the electrolysis cell without noble metal catalyst. Unlike other noble metal catalysts applied in the fuel cells and electrolysis cell, POM and TiO_2 are stable and low cost. The maximum output power density of liquid formic acid fuel cell after 12 h UV irradiation is 5.21 mW/cm^2 for phosphmolybdic acid and 22.81 m W/cm^2 for phosphotungstic acid respectively. The applied potential for the hydrogen evolution is as low as 0.8 V for phosphmolybdic acid and 0.6 V for phosphotungstic acid.
