TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of...TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.展开更多
Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemi...Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO_(2)@N-doped carbon nanotubes(TiO_(2)@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO_(2)@NC-NTs with tiny nanocrystals of anatase TiO_(2) wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m^(2) g^(-1) and a large pore size of~5 nm.The TiO_(2)@NC-NTs delivered high reversible capacities of 158 m A h g^(-1) at 2 C(1 C=335 m A g^(-1))for 2200 cycles and 146 m A h g^(-1) at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^(-1).Even at a high current density of 10 C,a capacity of 138 m A h g^(-1) could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO_(2)@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.展开更多
TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its...TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its successfully application in orthopaedic application.In this study,a structure optimised thin TiO2 nanotube(SONT)layer was successfully created on Ti6Al4V bone screw,and its fretting corrosion performance was investigated and compared to the pristine Ti6Al4V bone screws and NT decorated screw in a bone-screw fretting simulation rig.The results have shown that the debonding TiO2 nanotube from the bone screw reduced significantly,as a result of structure optimisation.The SONT layer also exhibited enhanced bio-corrosion resistance compared pristine bone screw and conventionally NT modified bone screw.It is postulated that interfacial layer between TiO2 nanotube and Ti6Al4V substrate,generated during structure optimisation process,enhanced bonding of TiO2 nanotube layer to the Ti6Al4V bone screws that leading to the improvement in fretting corrosion resistance.The results highlighted the potential SONT in orthopaedic application as bone fracture fixation devices.展开更多
Au nanoparticle-decorated TiO2 nanotube arrays are prepared by a simple method, which is a thermal annealing thin gold film deposited on anodie oxidized TiO2 nanotube arrays. These electron microscope images present t...Au nanoparticle-decorated TiO2 nanotube arrays are prepared by a simple method, which is a thermal annealing thin gold film deposited on anodie oxidized TiO2 nanotube arrays. These electron microscope images present that Au nanoparticles are well dispersed within the wall and on the surface of the XiO2 nanotubes. Meanwhile, the morphologies of Au nanoparticles can be controlled by changing the thickness of the deposited gold film. Associ- ated with the excitation of localized surface plasmon resonances, the prepared Au nanoparticle-decorated TiO2 nanotube arrays could work as visible light responsive photocatalysts to produce a greatly enhanced photocurrent density. By varying the initial gold film thickness, such Au nanoparticle-decorated TiO2 nanotube arrays could be optimized to obtain the highest photocurrent generation efficiency in the visible and UV light regions.展开更多
Highly ordered TiO_2 nanotube arrays(NTAs) on Si substrate possess broad applications due to its high surfaceto-volume ratio and novel functionalities, however, there are still some challenges on facile synthesis. Her...Highly ordered TiO_2 nanotube arrays(NTAs) on Si substrate possess broad applications due to its high surfaceto-volume ratio and novel functionalities, however, there are still some challenges on facile synthesis. Here, we report a simple and cost-effective high-field(90–180V) anodization method to grow highly ordered TiO_2 NTAs on Si substrate,and investigate the effect of anodization time, voltage, and fluoride content on the formation of TiO_2 NTAs. The current density–time curves, recorded during anodization processes, can be used to determine the optimum anodization time. It is found that the growth rate of TiO_2 NTAs is improved significantly under high field, which is nearly 8 times faster than that under low fields(40–60 V). The length and growth rate of the nanotubes are further increased with the increase of fluoride content in the electrolyte.展开更多
Pt-TiO2 nanotubes with tube diameter of -120 nm and uniformly dispersed Pt particles（size of -2 nm） were successfully synthesized via a carbon nanotube（CNT） templating method followed by a photo-deposition process...Pt-TiO2 nanotubes with tube diameter of -120 nm and uniformly dispersed Pt particles（size of -2 nm） were successfully synthesized via a carbon nanotube（CNT） templating method followed by a photo-deposition processing of Pt nanoparticles. The as-obtained Pt-TiO2 NTs possess both enhanced visible light absorption and reduced recombination of photogenerated electrons and holes. These merits boost the Pt-TiO2 NTs an excellent photocatalytic material toward photooxidation of a variety of low molecular hydrocarbons under atmospheric environment.展开更多
The efficiency of photo-electrocatalytic（PECa） devices for the production of solar fuels depends on several limiting factors such as light harvesting, charge recombination and mass transport diffusion. We analyse he...The efficiency of photo-electrocatalytic（PECa） devices for the production of solar fuels depends on several limiting factors such as light harvesting, charge recombination and mass transport diffusion. We analyse here how they influence the performances in PECa cells having a photo-anode based on Au-modified TiOnanotube（TNT） arrays, with the aim of developing design criteria to optimize the photo-anode and the PECa cell configuration for water photo-electrolysis（splitting） and ethanol photo-reforming processes.The TNT samples were prepared by controlled anodic oxidation of Ti foils and then decorated with gold nanoparticles using different techniques to enhance the visible light response through heterojunction and plasmonic effects. The activity tests were made in a gas-phase reactor, as well as in a PECa cell without applied bias. Results were analysed in terms of photo-generated current, Hproduction rate and photoconversion efficiency. Particularly, a solar-to-hydrogen efficiency of 0.83% and a Faradaic efficiency of 91%were obtained without adding sacrificial reagents.展开更多
TiO2 nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO2 nanot...TiO2 nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO2 nanotubes were examined by using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, cyclic voltammetry, and UV–Vis. The electrochemical band gap（Eg^CV） of the nanosilver-coated TiO2 nanotubes prepared by the anodization was found as 1.54 eV. Using the UV–Vis measurements, the optical band gap energy（Eg^op.） was calculated as 1.51 eV for the Ag/TiO2 nanotubes obtained by electroless dip coating. The electrical conductivity of the TiO2 nanotubes also increased from 3.0 × 10^-4 to 34.7 S/cm after nano Ag deposition by the anodization method.These Ag/TiO2 nanotubes with low band gap and high electrical conductivity are desirable for the applications in electronics, Li-ion batteries, and solar cells.展开更多
TiO2 films have been widely applied in photo- voltaic conversion techniques. TiO2 nanotube arrays （TiO2 NAs） can be grown directly on the surface of metal Ti by the anodic oxidation method. Bi2S3 and PbS nanoparticl...TiO2 films have been widely applied in photo- voltaic conversion techniques. TiO2 nanotube arrays （TiO2 NAs） can be grown directly on the surface of metal Ti by the anodic oxidation method. Bi2S3 and PbS nanoparticles （NPs） were firstly co-sensitized on TiOa NAs （denoted as PbS/Bi2S3（n）/TiO2 NAs） by a two-step process containing hydrothermal and sonication-assisted SILAR method. When the concentration of Bi3＋ is 5 mmol/L, the best photoelectrical performance was obtained under simulated solar irradiation. The short-circuit photocurrent （Jsc） and photoconversion efficiency （η） of PbS/Bi2S3（5）/TiO2 NAs electrode were 4.70 mA/cm and 1.13 %, respectively.展开更多
A novel catalyst,TiO2 nanotubes(TiO2 NTs)composite decorated by CuO and CeO2 particles,was prepared by a simple and cost-effective method.The TiO2 NTs were fabricated by the hydrothermal method,and CuO and CeO2 partic...A novel catalyst,TiO2 nanotubes(TiO2 NTs)composite decorated by CuO and CeO2 particles,was prepared by a simple and cost-effective method.The TiO2 NTs were fabricated by the hydrothermal method,and CuO and CeO2 particles loaded onto TiO2 NTs(CuO/CeO2@TiO2 NTs)were prepared by the water bath heating method.The CuO/CeO2@TiO2 NTs were investigated and characterized by transmission electron microscope(TEM),energy dispersive spectrometer(EDS),photoluminescence(PL),X-ray diffractometer(XRD)and ultraviolet-visible light diffuse reflectance spectrum(UV-Vis DRS).Both the p-n heterojunction formed at the p-CuO and n-TiO2 interfaces and the highly induced electron transfer of CeO2 can greatly promote the separation of electrons-holes.Therefore,CuO/CeO2@TiO2 NTs show enhanced absorption and have potential applications in photocatalysis.展开更多
Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolu...Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.展开更多
A new kind of photodetector based on a double-walled carbon nanotube （DWCNT） film and a TiO2 nanotube array with hetrodimensional non-ohmic contacts has been fabricated. Due to the dimensionality difference effect, ...A new kind of photodetector based on a double-walled carbon nanotube （DWCNT） film and a TiO2 nanotube array with hetrodimensional non-ohmic contacts has been fabricated. Due to the dimensionality difference effect, the DWCNT film/TiO2 nanotube array photodetector exhibits a much higher photocurrent-to-dark current ratio and photoresponse relative to an Au film/TiO2 nanotube array device, even at small bias voltage. The photocurrent-to-dark current ratio reached four orders of magnitude and a high photoresponse of 2467 A/W was found upon irradiation at 340 nm. Furthermore, the photosensitive regions could be extended into the visible range. The photocurrent-to-dark current ratio reached approximately three orders of magnitude upon irradiation at 532 nm, where the photon energy is much lower than the band gap of TiO2.展开更多
Metal nanoparticle （NP） co-catalysts on metal oxide semiconductor supports are attracting attention as photocatalysts for a variety of chemical reactions. Related efforts seek to make and use Pt-free catalysts. In t...Metal nanoparticle （NP） co-catalysts on metal oxide semiconductor supports are attracting attention as photocatalysts for a variety of chemical reactions. Related efforts seek to make and use Pt-free catalysts. In this regard, we report here enhanced CH4 formation rates of 25 and 60 μmol·g^-1·h^-1 by photocatalytic CO2 reduction using hitherto unused ZnPd NPs as well as Au and Ru NPs. The NPs are formed by colloidal synthesis and grafted onto short n-type anatase TiO2 nanotube arrays （TNAs）, grown anodically on transparent glass substrates. The interfacial electric fields in the NP-grafted TiO2 nanotubes were probed by ultraviolet photoelectron spectroscopy （UPS）. Au NP-grafted TiO2 nanotubes （Au-TNAs） showed no band bending, but a depletion region was detected in Ru NP-grafted TNAs （Ru-TNAs） and an accumulation layer was observed in ZnPd NP-grafted TNAs （ZnPd-TNAs）. Temperature programmed desorption （TPD） experiments showed significantly greater CO2 adsorption on NP-grafted TNAs. TNAs with grafted NPs exhibit broader and more intense UV-visible absorption bands than bare TNAs. We found that CO2 photoreduction by nanoparticle-grafted TNAs was driven not only by ultraviolet photons with energies greater than the TiO2 band gap, but also by blue photons close to and below the anatase band edge. The enhanced rate of CO2 reduction is attributed to superior use of blue photons in the solar spectrum, excellent reactant adsorption, efficient charge transfer to adsorbates, and low recombination losses.展开更多
A vertically aligned anatase TiO2 （A-TiO2） nanotube array has been fabricated by coating a ZnO nanorod （NR） template with a TiO2 precursor solution. After coating, the ZnO NR cores were selectively etched in an ac...A vertically aligned anatase TiO2 （A-TiO2） nanotube array has been fabricated by coating a ZnO nanorod （NR） template with a TiO2 precursor solution. After coating, the ZnO NR cores were selectively etched in an acidic environment to form TiO2 nanotubes （NTs）. More specifically, after growing the ZnO NRs via a hydrothermal method, one drop of the TiO2 precursor solution was cast to coat the ZnO NRs, the tops of which were previously covered with chemical capping materials by electrostatic interaction, and then the sample was sintered. Finally, the sample was immersed in an acidic solution resulting in selective etching of the ZnO NR cores. Thus, only TiO2 NTs remained on the substrate. The capping material is effectively used to create a perfect, hexagonal open-ended TiO2 NT array, which interestingly extends onset absorption towards the visible region.展开更多
Bi-doped TiO2 nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^-1 NaOH （aq.） through using Bi-doped TiO2 particles derived from conventional sol-gel method as starting...Bi-doped TiO2 nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^-1 NaOH （aq.） through using Bi-doped TiO2 particles derived from conventional sol-gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO2 nanotubes were investigated. The scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD） and X-ray photoelectron spectroscopy （XPS） observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi3＋. Bi-doping TiO2 nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO2 nanotubes. There was an optimal Bi-doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nano- belt, which in turn decreases the photocatlytic activity for hydrogen evolution.展开更多
Among the semiconductors, titanium dioxide has been identified as an effective photocatalyst due to its abundance, low cost, stability, and superior electronic energy band structure. Highly ordered nanotube arrays of ...Among the semiconductors, titanium dioxide has been identified as an effective photocatalyst due to its abundance, low cost, stability, and superior electronic energy band structure. Highly ordered nanotube arrays of titania were produced by anodization and mild sonication. The band gap energy of the titania nanotube arrays was reduced to 2.6 eV by co-doping with Fe, C, N atoms using an electrolyte solution containing K3Fe（CN）6. The photo- conversion of phenol in a batch photoreactor increased to more than 18% based on the initial concentration of phenol by using a composite nanomaterial consisting of titania nanotube arrays and Pt/ZIF-8 nanoparticles. A layer-by- layer assembly technique for the deposition of titania nanoparticles was developed to fabricate air filters for the degradation of trace amounts of toluene in the air and preparation of superhyrophobic surfaces for oil-water separation and anti-corrosion surfaces.展开更多
The research of TiO2 nanotubes(TNTs)in the field of biomedicine has been increasingly active.However,given the diversity of the nanoscale dimension and controversial reports,our understanding of the structure-property...The research of TiO2 nanotubes(TNTs)in the field of biomedicine has been increasingly active.However,given the diversity of the nanoscale dimension and controversial reports,our understanding of the structure-property relationships of TNTs is not yet complete.In this paper,gradient TNTs with a wide diameter range of 20-350 nm were achieved by bipolar electrochemistry and utilized for a thorough high-throughput study of the effect of nanotube dimension and crystalline phase on protein adsorption and cell behaviors.Results indicated that protein adsorption escalated with nanotube dimension whereas cell proliferation and differentiation are preferred on small diameter(<70 nm)nanotubes.Large diameter anatase nanotubes had higher adsorption of serum proteins than as-prepared ones.But only as-prepared small diameter nanotubes presented slightly higher cell proliferation than corresponding annealed nanotubes whereas there was no discernible difference between as-prepared and annealed nanotubes on cell differentiation for the entire gradient.Those findings replenish previous research about how cell responses to TNTs with a wide diameter range and provide scientific guidance for the optimal design of biomedical materials.展开更多
The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer （DET） of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO2 nano...The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer （DET） of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO2 nanotubes （C-TiO2 NTs）. Using a simple surfactant-assisted method, controllable hybridization of TiO2 NTs with conductive amorphous carbon species is realized. The obtained C-TiO2 NTs is ingeniously chosen to serve as an ideal ＂vessel＂ for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO2 NTs leads to a much better conductivity of TiO2 NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C-TiO2 NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin （Hb）, with a large surface electroactive Hb coverage （I＊） of 3.3 × 10 9 mol·cm^-2. Enhanced DET of Hb is commendably observed on the constructed Hb/C-TiO2 NTs biosensor with a couple of well-defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H202 with the detection limit as low as 3.1 × 10^-8 mol/L.展开更多
With the rapid development of biomedical sciences,contradictory results on the relationships between biological responses and material properties emerge continuously,adding to the challenge of interpreting the incompr...With the rapid development of biomedical sciences,contradictory results on the relationships between biological responses and material properties emerge continuously,adding to the challenge of interpreting the incomprehensible interfacial process.In the present paper,we use cell proliferation on titanium dioxide nanotubes(TNTs)as a case study and apply machine learning methodologies to decipher contradictory results in the literature.The gradient boosting decision tree model demonstrates that cell density has a higher impact on cell proliferation than other obtainable experimental features in most publications.Together with the variation of other essential features,the controversy of cell proliferation trends on various TNTs is understandable.By traversing all combinational experimental features and the corresponding forecast using an exhausted grid search strategy,we find that adjusting cell density and sterilization methods can simultaneously induce opposite cell proliferation trends on various TNTs diameter,which is further validated by experiments.This case study reveals that machine learning is a burgeoning tool in deciphering controversial results in biomedical researches,opening up an avenue to explore the structure-property relationships of biomaterials.展开更多
基金ACKNOWLEDGMENTS This work was supported by the Science Foundation of Chongqing Science and Technology Committee （No.CSTS2009BB4047）, and Innovative Talent Training Project, the Third Stage of ＂211 Project＂ of Chongqing University （No.S-09109）.
文摘TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.
基金the financial support provided by internal reseach funding of Khalifa University of Science and Technology,United Arab Emirates(Grant No.CIRA-2018-16)。
文摘Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO_(2)@N-doped carbon nanotubes(TiO_(2)@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO_(2)@NC-NTs with tiny nanocrystals of anatase TiO_(2) wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m^(2) g^(-1) and a large pore size of~5 nm.The TiO_(2)@NC-NTs delivered high reversible capacities of 158 m A h g^(-1) at 2 C(1 C=335 m A g^(-1))for 2200 cycles and 146 m A h g^(-1) at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^(-1).Even at a high current density of 10 C,a capacity of 138 m A h g^(-1) could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO_(2)@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.
基金financially supported by the European Union via the H2020-MSCA-RISE-2016 program(BAMOS Project,734156)Royal Society via the International Exchange Program(IE161349)+2 种基金Key Research Project from the National Key Research and Development Program of China(2016YFC1100401)National Natural Science Foundation of China(51705507)Young Elite Scientists Sponsorship Program by CAST(2017QNRC0181)。
文摘TiO2 nanotubes(NT)has been demonstrated its potential in orthopaedic applications due to its enhanced surface wettability and bio-osteointegration.However,the fretting biocorrosion is the main concern that limited its successfully application in orthopaedic application.In this study,a structure optimised thin TiO2 nanotube(SONT)layer was successfully created on Ti6Al4V bone screw,and its fretting corrosion performance was investigated and compared to the pristine Ti6Al4V bone screws and NT decorated screw in a bone-screw fretting simulation rig.The results have shown that the debonding TiO2 nanotube from the bone screw reduced significantly,as a result of structure optimisation.The SONT layer also exhibited enhanced bio-corrosion resistance compared pristine bone screw and conventionally NT modified bone screw.It is postulated that interfacial layer between TiO2 nanotube and Ti6Al4V substrate,generated during structure optimisation process,enhanced bonding of TiO2 nanotube layer to the Ti6Al4V bone screws that leading to the improvement in fretting corrosion resistance.The results highlighted the potential SONT in orthopaedic application as bone fracture fixation devices.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11474215 and 21204058the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Au nanoparticle-decorated TiO2 nanotube arrays are prepared by a simple method, which is a thermal annealing thin gold film deposited on anodie oxidized TiO2 nanotube arrays. These electron microscope images present that Au nanoparticles are well dispersed within the wall and on the surface of the XiO2 nanotubes. Meanwhile, the morphologies of Au nanoparticles can be controlled by changing the thickness of the deposited gold film. Associ- ated with the excitation of localized surface plasmon resonances, the prepared Au nanoparticle-decorated TiO2 nanotube arrays could work as visible light responsive photocatalysts to produce a greatly enhanced photocurrent density. By varying the initial gold film thickness, such Au nanoparticle-decorated TiO2 nanotube arrays could be optimized to obtain the highest photocurrent generation efficiency in the visible and UV light regions.
基金supported by National 863 Program 2011AA050518the Natural Science Foundation of China(Grant Nos.11174197,11574203,and 61234005)
文摘Highly ordered TiO_2 nanotube arrays(NTAs) on Si substrate possess broad applications due to its high surfaceto-volume ratio and novel functionalities, however, there are still some challenges on facile synthesis. Here, we report a simple and cost-effective high-field(90–180V) anodization method to grow highly ordered TiO_2 NTAs on Si substrate,and investigate the effect of anodization time, voltage, and fluoride content on the formation of TiO_2 NTAs. The current density–time curves, recorded during anodization processes, can be used to determine the optimum anodization time. It is found that the growth rate of TiO_2 NTAs is improved significantly under high field, which is nearly 8 times faster than that under low fields(40–60 V). The length and growth rate of the nanotubes are further increased with the increase of fluoride content in the electrolyte.
基金financially supported by the National Key Project on Basic Research(No.2013CB933203)the Natural Science Foundation of China(Nos.21373224 and 21577143)+1 种基金the Natural Science Foundation of Fujian Province(Nos.2014H0054 and 2015J0544)the One Hundred Talents Program of the Chinese Academy of Sciences
文摘Pt-TiO2 nanotubes with tube diameter of -120 nm and uniformly dispersed Pt particles（size of -2 nm） were successfully synthesized via a carbon nanotube（CNT） templating method followed by a photo-deposition processing of Pt nanoparticles. The as-obtained Pt-TiO2 NTs possess both enhanced visible light absorption and reduced recombination of photogenerated electrons and holes. These merits boost the Pt-TiO2 NTs an excellent photocatalytic material toward photooxidation of a variety of low molecular hydrocarbons under atmospheric environment.
基金The TERRA(Tandem Electrocatalytic Reactor for energy/Resource efficiency and process intensification,H2020 project 677471)Eco~2CO_2(Eco-friendly biorefinery fine chemicals from CO_2 photo-catalytic reduction,FP7 project 309701)
文摘The efficiency of photo-electrocatalytic（PECa） devices for the production of solar fuels depends on several limiting factors such as light harvesting, charge recombination and mass transport diffusion. We analyse here how they influence the performances in PECa cells having a photo-anode based on Au-modified TiOnanotube（TNT） arrays, with the aim of developing design criteria to optimize the photo-anode and the PECa cell configuration for water photo-electrolysis（splitting） and ethanol photo-reforming processes.The TNT samples were prepared by controlled anodic oxidation of Ti foils and then decorated with gold nanoparticles using different techniques to enhance the visible light response through heterojunction and plasmonic effects. The activity tests were made in a gas-phase reactor, as well as in a PECa cell without applied bias. Results were analysed in terms of photo-generated current, Hproduction rate and photoconversion efficiency. Particularly, a solar-to-hydrogen efficiency of 0.83% and a Faradaic efficiency of 91%were obtained without adding sacrificial reagents.
基金supported by Sakarya University with Project No. BAPK-2012-50-01-018
文摘TiO2 nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO2 nanotubes were examined by using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, cyclic voltammetry, and UV–Vis. The electrochemical band gap（Eg^CV） of the nanosilver-coated TiO2 nanotubes prepared by the anodization was found as 1.54 eV. Using the UV–Vis measurements, the optical band gap energy（Eg^op.） was calculated as 1.51 eV for the Ag/TiO2 nanotubes obtained by electroless dip coating. The electrical conductivity of the TiO2 nanotubes also increased from 3.0 × 10^-4 to 34.7 S/cm after nano Ag deposition by the anodization method.These Ag/TiO2 nanotubes with low band gap and high electrical conductivity are desirable for the applications in electronics, Li-ion batteries, and solar cells.
基金supported by Program of International S&T Cooperation(2013 DFA51050)National Magnetic Confinement Fusion Science Program(2013GB110001)+2 种基金the 863Program(2014AA032701)the National Natural Science Foundation of China(11405138,51302231)the Western Superconducting Technologies Co.,Ltd
文摘TiO2 films have been widely applied in photo- voltaic conversion techniques. TiO2 nanotube arrays （TiO2 NAs） can be grown directly on the surface of metal Ti by the anodic oxidation method. Bi2S3 and PbS nanoparticles （NPs） were firstly co-sensitized on TiOa NAs （denoted as PbS/Bi2S3（n）/TiO2 NAs） by a two-step process containing hydrothermal and sonication-assisted SILAR method. When the concentration of Bi3＋ is 5 mmol/L, the best photoelectrical performance was obtained under simulated solar irradiation. The short-circuit photocurrent （Jsc） and photoconversion efficiency （η） of PbS/Bi2S3（5）/TiO2 NAs electrode were 4.70 mA/cm and 1.13 %, respectively.
基金National Natural Science Foundation of China(No.11372205)
文摘A novel catalyst,TiO2 nanotubes(TiO2 NTs)composite decorated by CuO and CeO2 particles,was prepared by a simple and cost-effective method.The TiO2 NTs were fabricated by the hydrothermal method,and CuO and CeO2 particles loaded onto TiO2 NTs(CuO/CeO2@TiO2 NTs)were prepared by the water bath heating method.The CuO/CeO2@TiO2 NTs were investigated and characterized by transmission electron microscope(TEM),energy dispersive spectrometer(EDS),photoluminescence(PL),X-ray diffractometer(XRD)and ultraviolet-visible light diffuse reflectance spectrum(UV-Vis DRS).Both the p-n heterojunction formed at the p-CuO and n-TiO2 interfaces and the highly induced electron transfer of CeO2 can greatly promote the separation of electrons-holes.Therefore,CuO/CeO2@TiO2 NTs show enhanced absorption and have potential applications in photocatalysis.
基金support from the European Union Horizon 2020 program(project HERMES,nr.952184)the Ministry of Education,Youth and Sports of the Czech Republic for supporting CEMNAT(LM2023037)+1 种基金Czech-NanoLab(LM2023051)infrastructures for providing ALD,SEM,EDX,XPS,TEM,and XRDCzech Science Foundation(project 23-08019X,EXPRO).
文摘Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.
基金This work was financially supported by National Natural Science Foundation of China （NSFC） （Grants No. 10774085 and No. 10774016）.
文摘A new kind of photodetector based on a double-walled carbon nanotube （DWCNT） film and a TiO2 nanotube array with hetrodimensional non-ohmic contacts has been fabricated. Due to the dimensionality difference effect, the DWCNT film/TiO2 nanotube array photodetector exhibits a much higher photocurrent-to-dark current ratio and photoresponse relative to an Au film/TiO2 nanotube array device, even at small bias voltage. The photocurrent-to-dark current ratio reached four orders of magnitude and a high photoresponse of 2467 A/W was found upon irradiation at 340 nm. Furthermore, the photosensitive regions could be extended into the visible range. The photocurrent-to-dark current ratio reached approximately three orders of magnitude upon irradiation at 532 nm, where the photon energy is much lower than the band gap of TiO2.
文摘Metal nanoparticle （NP） co-catalysts on metal oxide semiconductor supports are attracting attention as photocatalysts for a variety of chemical reactions. Related efforts seek to make and use Pt-free catalysts. In this regard, we report here enhanced CH4 formation rates of 25 and 60 μmol·g^-1·h^-1 by photocatalytic CO2 reduction using hitherto unused ZnPd NPs as well as Au and Ru NPs. The NPs are formed by colloidal synthesis and grafted onto short n-type anatase TiO2 nanotube arrays （TNAs）, grown anodically on transparent glass substrates. The interfacial electric fields in the NP-grafted TiO2 nanotubes were probed by ultraviolet photoelectron spectroscopy （UPS）. Au NP-grafted TiO2 nanotubes （Au-TNAs） showed no band bending, but a depletion region was detected in Ru NP-grafted TNAs （Ru-TNAs） and an accumulation layer was observed in ZnPd NP-grafted TNAs （ZnPd-TNAs）. Temperature programmed desorption （TPD） experiments showed significantly greater CO2 adsorption on NP-grafted TNAs. TNAs with grafted NPs exhibit broader and more intense UV-visible absorption bands than bare TNAs. We found that CO2 photoreduction by nanoparticle-grafted TNAs was driven not only by ultraviolet photons with energies greater than the TiO2 band gap, but also by blue photons close to and below the anatase band edge. The enhanced rate of CO2 reduction is attributed to superior use of blue photons in the solar spectrum, excellent reactant adsorption, efficient charge transfer to adsorbates, and low recombination losses.
文摘A vertically aligned anatase TiO2 （A-TiO2） nanotube array has been fabricated by coating a ZnO nanorod （NR） template with a TiO2 precursor solution. After coating, the ZnO NR cores were selectively etched in an acidic environment to form TiO2 nanotubes （NTs）. More specifically, after growing the ZnO NRs via a hydrothermal method, one drop of the TiO2 precursor solution was cast to coat the ZnO NRs, the tops of which were previously covered with chemical capping materials by electrostatic interaction, and then the sample was sintered. Finally, the sample was immersed in an acidic solution resulting in selective etching of the ZnO NR cores. Thus, only TiO2 NTs remained on the substrate. The capping material is effectively used to create a perfect, hexagonal open-ended TiO2 NT array, which interestingly extends onset absorption towards the visible region.
基金We acknowledge the financial supports from the Na-tional Natural Science Foundation of China （Nos. 21276190 and 20806059）.
文摘Bi-doped TiO2 nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^-1 NaOH （aq.） through using Bi-doped TiO2 particles derived from conventional sol-gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO2 nanotubes were investigated. The scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, X-ray diffraction （XRD） and X-ray photoelectron spectroscopy （XPS） observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi3＋. Bi-doping TiO2 nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO2 nanotubes. There was an optimal Bi-doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nano- belt, which in turn decreases the photocatlytic activity for hydrogen evolution.
文摘Among the semiconductors, titanium dioxide has been identified as an effective photocatalyst due to its abundance, low cost, stability, and superior electronic energy band structure. Highly ordered nanotube arrays of titania were produced by anodization and mild sonication. The band gap energy of the titania nanotube arrays was reduced to 2.6 eV by co-doping with Fe, C, N atoms using an electrolyte solution containing K3Fe（CN）6. The photo- conversion of phenol in a batch photoreactor increased to more than 18% based on the initial concentration of phenol by using a composite nanomaterial consisting of titania nanotube arrays and Pt/ZIF-8 nanoparticles. A layer-by- layer assembly technique for the deposition of titania nanoparticles was developed to fabricate air filters for the degradation of trace amounts of toluene in the air and preparation of superhyrophobic surfaces for oil-water separation and anti-corrosion surfaces.
基金the State Key Project of Research and Development(2016YFC1100300)National Natural Science Foundation of China(11904301,21773199)+1 种基金Natural Science Foundation of Guangdong Province,China(2016A030310370)111 Project(B16029)。
文摘The research of TiO2 nanotubes(TNTs)in the field of biomedicine has been increasingly active.However,given the diversity of the nanoscale dimension and controversial reports,our understanding of the structure-property relationships of TNTs is not yet complete.In this paper,gradient TNTs with a wide diameter range of 20-350 nm were achieved by bipolar electrochemistry and utilized for a thorough high-throughput study of the effect of nanotube dimension and crystalline phase on protein adsorption and cell behaviors.Results indicated that protein adsorption escalated with nanotube dimension whereas cell proliferation and differentiation are preferred on small diameter(<70 nm)nanotubes.Large diameter anatase nanotubes had higher adsorption of serum proteins than as-prepared ones.But only as-prepared small diameter nanotubes presented slightly higher cell proliferation than corresponding annealed nanotubes whereas there was no discernible difference between as-prepared and annealed nanotubes on cell differentiation for the entire gradient.Those findings replenish previous research about how cell responses to TNTs with a wide diameter range and provide scientific guidance for the optimal design of biomedical materials.
基金the National Natural Science Foundation of China，NSFC Research Fund for International Young Scientists，the Fundamental Research Funds for the Central Universities
文摘The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer （DET） of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO2 nanotubes （C-TiO2 NTs）. Using a simple surfactant-assisted method, controllable hybridization of TiO2 NTs with conductive amorphous carbon species is realized. The obtained C-TiO2 NTs is ingeniously chosen to serve as an ideal ＂vessel＂ for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO2 NTs leads to a much better conductivity of TiO2 NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C-TiO2 NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin （Hb）, with a large surface electroactive Hb coverage （I＊） of 3.3 × 10 9 mol·cm^-2. Enhanced DET of Hb is commendably observed on the constructed Hb/C-TiO2 NTs biosensor with a couple of well-defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H202 with the detection limit as low as 3.1 × 10^-8 mol/L.
基金This work was supported by the State Key Project of Research and Development(2016YFC1100300)National Natural Science Foundation of China(11904301,21773199).
文摘With the rapid development of biomedical sciences,contradictory results on the relationships between biological responses and material properties emerge continuously,adding to the challenge of interpreting the incomprehensible interfacial process.In the present paper,we use cell proliferation on titanium dioxide nanotubes(TNTs)as a case study and apply machine learning methodologies to decipher contradictory results in the literature.The gradient boosting decision tree model demonstrates that cell density has a higher impact on cell proliferation than other obtainable experimental features in most publications.Together with the variation of other essential features,the controversy of cell proliferation trends on various TNTs is understandable.By traversing all combinational experimental features and the corresponding forecast using an exhausted grid search strategy,we find that adjusting cell density and sterilization methods can simultaneously induce opposite cell proliferation trends on various TNTs diameter,which is further validated by experiments.This case study reveals that machine learning is a burgeoning tool in deciphering controversial results in biomedical researches,opening up an avenue to explore the structure-property relationships of biomaterials.
