TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydr...TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.展开更多
CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption...CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption and reaction （SILAR） process. The structural and morphological properties of the samples were characterized by X-ray diffraction （XRD）, field-emission scanning electron microscopy （FESEM）, and transmission electron microscopy （TEM）. The results indicate that CdSe/CdS QDs are uniformly coated on the surface of the TiO2 nanorods. The shift of light absorption edge was monitored by taking UV-visible absorption spectra. Compared with the absorption spectra of the TiO2 nanorod array, deposition of CdSe/CdS QDs shifts the absorption edge to the higher wavelength. The enhanced light absorption in the visible-light region of CdSe/CdS/TiO2 nanorod array indicates that CdSe/CdS layers can act as co-sensitizers in quantum dots sensitized solar cells （QDSSCs）. By optimizing the CdSe layer deposition cycles, a photocurrent of 5.78 mA/cm2, an open circuit photovoltage of 0.469 V and a conversion efficiency of 1.34 % were obtained under an illumination of 100 mw/cm2.展开更多
The rutile TiO2 nanorod arrays with 240 nm in length, 30 nm in diameter, and 420 btm 2 in areal density were prepared by the hydrothermal method to replace the typical 200-300 nm thick mesoporous TiO2 thin films in pe...The rutile TiO2 nanorod arrays with 240 nm in length, 30 nm in diameter, and 420 btm 2 in areal density were prepared by the hydrothermal method to replace the typical 200-300 nm thick mesoporous TiO2 thin films in perovskite solar cells. The CH3NH3PbI3 xBrx capping layers with different thicknesses were obtained on the TiO2 nanorod arrays using different concentration PbI2.DMSO complex precursor solutions in DMF and the photovoltaic performances of the corresponding solar cells were compared. The perovskite solar cells based on 240 nm long TiO2 nanorod arrays and 420 nm thick CH3NH3PbI3 xBrx capping layers showed the best photoelectric conversion efficiency （PCE） of 15.56% and the average PCE of 14.93 ± 0.63% at the relative humidity of 50%-54% under the illumination of simulated AM 1.5 sunlight （100 mW.cm-2）.展开更多
Nanomaterials show promising opportunities to address clinical problems （such as insufficient capture of circulating tumor cells; CTCs） via the high surface area-to-volume ratio and high affinity for biological cell...Nanomaterials show promising opportunities to address clinical problems （such as insufficient capture of circulating tumor cells; CTCs） via the high surface area-to-volume ratio and high affinity for biological cells. However, how to apply these nanomaterials as a nano-bio interface in a microfluidic device for efficient CTC capture with high specificity remains a challenge. In the present work, we first found that a titanium dioxide （TiO2） nanorod array that can be conveniently prepared on multiple kinds of substrates has high affinity for tumor cells. Then, the TiO2 nanorod array was vertically grown on the surface of a microchannel with hexagonally patterned Si micropillars via a hydrothermal reaction, forming a new kind of a micro-nano 3D hierarchically structured microfluidic device. The vertically grown TiO2 nanorod array was used as a sensitive nano-bio interface of this 3D hierarchically structured microfluidic device, which showed high efficiency of CTC capture （76.7% ± 7.1%） in an artificial whole-blood sample.展开更多
基金Project supported by the Fundamental Research Funds for the Central Universities,China(Grant No.2013XK07)
文摘TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.
基金National Natural Science Foundation of China(No.11174071)the International Cooperation Project of Wuhan City and Hubei Province(Nos.201070934339 and 2010BFA010)
文摘CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption and reaction （SILAR） process. The structural and morphological properties of the samples were characterized by X-ray diffraction （XRD）, field-emission scanning electron microscopy （FESEM）, and transmission electron microscopy （TEM）. The results indicate that CdSe/CdS QDs are uniformly coated on the surface of the TiO2 nanorods. The shift of light absorption edge was monitored by taking UV-visible absorption spectra. Compared with the absorption spectra of the TiO2 nanorod array, deposition of CdSe/CdS QDs shifts the absorption edge to the higher wavelength. The enhanced light absorption in the visible-light region of CdSe/CdS/TiO2 nanorod array indicates that CdSe/CdS layers can act as co-sensitizers in quantum dots sensitized solar cells （QDSSCs）. By optimizing the CdSe layer deposition cycles, a photocurrent of 5.78 mA/cm2, an open circuit photovoltage of 0.469 V and a conversion efficiency of 1.34 % were obtained under an illumination of 100 mw/cm2.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51472071 and 51272061)Talent Project of Hefei University of Technology,China(Grant Nos.75010-037004 and 75010-037003)
文摘The rutile TiO2 nanorod arrays with 240 nm in length, 30 nm in diameter, and 420 btm 2 in areal density were prepared by the hydrothermal method to replace the typical 200-300 nm thick mesoporous TiO2 thin films in perovskite solar cells. The CH3NH3PbI3 xBrx capping layers with different thicknesses were obtained on the TiO2 nanorod arrays using different concentration PbI2.DMSO complex precursor solutions in DMF and the photovoltaic performances of the corresponding solar cells were compared. The perovskite solar cells based on 240 nm long TiO2 nanorod arrays and 420 nm thick CH3NH3PbI3 xBrx capping layers showed the best photoelectric conversion efficiency （PCE） of 15.56% and the average PCE of 14.93 ± 0.63% at the relative humidity of 50%-54% under the illumination of simulated AM 1.5 sunlight （100 mW.cm-2）.
基金The authors are thankful for funding from the National Natural Science Foundation of China （Nos. 51402063, 51432005, 61405040, 61505010, 51502018, 31270022, and 81471784）, the ＂100 Talents Program＂ of the Chinese Academy of Sciences, Beijing City Committee of science and technology （No. Z151100003315010）, Beijing Natural Science Foundation （Nos. 2164077 and 2164076）, the Fundamental Research Funds of Shandong University （No. 2014QY003）, and the Youth Innovation Promotion Association of the Chinese Academy of Sciences （No. 2015023）. The authors also acknowledge the support from the＂thousands talents＂ program for pioneer researchers and his innovation team, and support from the President Funding of the Chinese Academy of Sciences.
文摘Nanomaterials show promising opportunities to address clinical problems （such as insufficient capture of circulating tumor cells; CTCs） via the high surface area-to-volume ratio and high affinity for biological cells. However, how to apply these nanomaterials as a nano-bio interface in a microfluidic device for efficient CTC capture with high specificity remains a challenge. In the present work, we first found that a titanium dioxide （TiO2） nanorod array that can be conveniently prepared on multiple kinds of substrates has high affinity for tumor cells. Then, the TiO2 nanorod array was vertically grown on the surface of a microchannel with hexagonally patterned Si micropillars via a hydrothermal reaction, forming a new kind of a micro-nano 3D hierarchically structured microfluidic device. The vertically grown TiO2 nanorod array was used as a sensitive nano-bio interface of this 3D hierarchically structured microfluidic device, which showed high efficiency of CTC capture （76.7% ± 7.1%） in an artificial whole-blood sample.
