Ultraviolet(UV)radiation can cause degradation or aging of many polymers and shorten the working-life of their products.Thus,UV protective covers are required in various occasions.Textiles with the UV-shielding functi...Ultraviolet(UV)radiation can cause degradation or aging of many polymers and shorten the working-life of their products.Thus,UV protective covers are required in various occasions.Textiles with the UV-shielding function possess unique properties compared with those covers in board or film shapes.TiO_2 nanoparticles(NPs),which were reported to have superior UV blocking function,can be used to produce UV protective covers in combination with fabric.However,efficient and environmentally friendly immobilization of TiO_2 Nps onto the fabrics is challenging.Polydopamine(PDA),a biomimetic synthetic polymer,has attracted great attentions recently due to its superior affinity to various materials and facile application procedure.Hence,in this research,the surface of nylon fabrics was modified by PDA to immobilizeTiO_2 NPs.Themodificationconditionswere systematically optimized.The immobilization of the NPs was confirmed by Fourier transform infrared spectrometer(FTIR)and scanning electron microscope(SEM).The functionalized nylon fabrics were proved to exhibit improved UV protection properties even after washing.This work provides a new and versatile surface modification technique for textiles.展开更多
The apparent 1^st order rate constant of photodegradation of formaldehyde by carbon containing TiO2 nanoparticles has been investigated by numerical integration of mass transfer equation with measured degradation degr...The apparent 1^st order rate constant of photodegradation of formaldehyde by carbon containing TiO2 nanoparticles has been investigated by numerical integration of mass transfer equation with measured degradation degree using a tubular photoreactor. The carbon containing TiO2 nanoparticles are synthesized by the oxidation of TiCl4 in propane/air flame CVD process with futile fraction up to 0.3 and carbon mass fractions up to 0.22, respectively. Thin TiO2 film is coated on the wall of the tubular reactor by sedimentation method. Effects of rutile mass fraction and carbon content have been examined on the apparent 1 ^st order rate constant and results show that, at 570ppm of formaldehyde loaded air stream, 80% relative humidity and about 100nm thin TiOa film, the 1^st order rate constant increases with increasing rutile mass fraction up to 0.3, occurs a maximum at the carbon content of about 5% by weight and is about 2.5 times of that at carbon content about zero or above 10%.展开更多
The extensive application of TiO_(2)nanoparticles(NPs)highlights the importance of investigating their influence on aquatic systems.In this work,the effect of TiO_(2)NPs on heavy metals speciation was studied on a lab...The extensive application of TiO_(2)nanoparticles(NPs)highlights the importance of investigating their influence on aquatic systems.In this work,the effect of TiO_(2)NPs on heavy metals speciation was studied on a lab scale.For this goal,a series of aquaria containing water,sediment,and TiO_(2)NPs with various concentrations were set up.The study results revealed that TiO_(2)NPs caused(copper)Cu,(mercury)Hg,(titanium)Ti,and(zinc)Zn to be adsorbed by sediments in the forms of exchangeable and Fe-Mn species.According to measurements,30μg/L of TiO_(2)NPs made Cu,Hg,Ti and Zn concentration in the water column decreased from 33,1.14,20,and 32 to 4,0.58,3,and 22.3μg/L,respectively.Manganese(Mn)was also adsorbed by sediment,and in all experiments,its concentration in the water column reduced from 44 to about 20μg/L.Due to the photocatalytic capacity of TiO_(2)NPs,arsenic(As)concentration in the water column increased from 0 to 8.7μg/L with the introduction of30μg/L of TiO_(2)NPs.The sequential extraction results showed that in all experiments,concentrations of lead(Pb),nickel(Ni),and cobalt(Co)remained constant in different chemical species of sediment,which meant conservative behavior of them in presence of TiO_(2)NPs.In addition,a remarkable change was observed in water quality parameters such as ORP,TDS,TOC,BOD,NO3’and PO_(4)after the introduction of TiO_(2)NPs to aquaria.The reason behind these changes could be related to the decomposition of sediment organic content by TiO_(2)NPs.展开更多
The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visi...The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visible light-responsible TiO2 nanoparticles. Firstly, an Au substrate was cycled in a deoxygenated aqueous solution containing 0.1 M HCI and 60 mM anatase TiO2 nanoparticles from -0.28 to ＋1.22 V vs Ag/AgCI at 500 mV/s with 25 scans. The durations at the cathodic and anodic vertexes are 10 and 5 s, respectively. After this process, Au-and TiO2-containing complexes were left in the solution. Then a Pt electrode immediately replaced the Au working electrode, and a cathodic overpotential of 0.6 V from the Open Circuit Potential （OCP） was applied under sonification to synthesize Au nanoparticles. Encouragingly, the prepared Au nanoparticles caped with visible light-responsible TiO2 nanoparticles are more active for the decomposition of formaldehyde than pure visible light-responsible TiO2 nanoparticles are in the same condition. After 5 days testing, the formaldehyde was decomposed ca. 35% in containing Au nanoparticles caped with visible light-responsible TiO2 nanoparticles, but the formaldehyde was decomposed only ca. 25% in containing pure visible light-responsible TiO2 nanoparticles.展开更多
Mesoporous TiO2 （m-TiO2） nanoparticles were used to prepare the porous film electrodes for dye-sensitized solar cells, and a second metal oxide （MgO, ZnO, A1203, or NiO） modifi- cation was carried out by dipping t...Mesoporous TiO2 （m-TiO2） nanoparticles were used to prepare the porous film electrodes for dye-sensitized solar cells, and a second metal oxide （MgO, ZnO, A1203, or NiO） modifi- cation was carried out by dipping the m-TiO2 electrode into their respective nitrate solution followed by annealing at 500 ℃. Experimental results indicated that the above second metal oxide modifications on m-TiO2 electrode are shown in all cases to act as barrier layer for the interracial charge transfer processes, but film electron transport and interfacial charge recombination characteristics under applied bias voltage were dependent significantly on the existing states and kinds of these second metal oxides. Those changes based on sec- ond metal oxide modifications showed good correlation with the current-voltage analyses of dye-sensitized solar cell, and all modifications were found to increase the open-circuit photo- voltage in various degrees, while the MgO, ZnO, and NiO modifications result in 23%, 13%, and 6% improvement in cell conversion efficiency, respectively. The above observations indi- cate that controlling the charge transport and recombination is very important to improve the photovoltaic performance of TiO2-based solar cell.展开更多
TiO2 has been tested to be toxic to DNA under the photo-irradiation of ultraviolet A （UVA）. However, in the dark conditions, after several days of treatment with TiO2 in aqueous solution, the interaction between TiO...TiO2 has been tested to be toxic to DNA under the photo-irradiation of ultraviolet A （UVA）. However, in the dark conditions, after several days of treatment with TiO2 in aqueous solution, the interaction between TiO2 and two types of DNA was detected and the mechanisms were studied by the methods of gel-electrophoresis, IR spectroscopy and TEM. The results showed that the DNA would be bound to TiO2; the ratio of binding was related to the concentration and the treating time; the mechanism of binding is related to phosphate groups of DNA. Besides, DNA with different structure showed different degree of binding. These findings showed a new possible way through which the TiO2 nanoparticles interact with DNA.展开更多
Photocatalytic reduction of CO2 into various types of fuels has attracted great interest,and serves as a potential solution to addressing current global warming and energy challenges.In this work,Ag-Cu nanoparticles a...Photocatalytic reduction of CO2 into various types of fuels has attracted great interest,and serves as a potential solution to addressing current global warming and energy challenges.In this work,Ag-Cu nanoparticles are densely supported on N-doped TiO2 nanowire through a straightforward nanofabrication approach.The range of light absorption by N-doped TiO2 can be tuned to match the plasmonic band of Ag nanoparticles,which allows synergizing a resonant energy transfer process with the Schottky junction.Meanwhile,Cu nanoparticles can provide active sites for the reduction of CO2 molecules.Remarkably,the performance of photocatalytic CO2 reduction is improved to produce CH4 at a rate of 720μmol·g-1·h-1 under full-spectrum irradiation.展开更多
Photocatalytic multilayer nanocomposite films composed of anatase TiO2 nanoparticles and lignosulfonates （LS） were fabricated on quartz slides by the layer-by-layer （LBL） self-assembly technique. X-ray photoelectr...Photocatalytic multilayer nanocomposite films composed of anatase TiO2 nanoparticles and lignosulfonates （LS） were fabricated on quartz slides by the layer-by-layer （LBL） self-assembly technique. X-ray photoelectron spectroscopy （XPS）, UV-vis spectroscopy and atomic force microscopy （AFM） were used to characterize the TiO2/LS multilayer nanocomposite films. Moreover, the photocatalytic properties （decomposition of methyl orange and bacteria） of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV-Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO2 nanoparticles when a 10-bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiOz/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO2 layers, and the results of decomposition of bacteria under UV irradiation showed that TiO2/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria （Escherichia coil）.展开更多
Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhan...Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhancing patient safety and meeting global dialysis water quality standards. Advanced filtration technologies, such as titanium dioxide (TiO₂)-based nanoparticle filters, offer a promising approach to improve water purification processes in renal care. Objectives: This study aimed to develop and evaluate the effectiveness of a TiO₂-based nanoparticle microporous filtration system for hemodialysis water purification. The objectives included analyzing the system’s performance in reducing chemical contaminants (calcium, magnesium, aluminum, and lead) and microbiological contaminants (total viable count [TVC] and endotoxin units [EU]) across multiple renal centers. Methods: Water samples from three renal centers (RC1, RC2, and RC3) were analyzed pre- and post-filtration. TiO₂ nanoparticles were synthesized using the sol-gel method and characterized via Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM/EDX). The microporous filter, fabricated with TiO₂ nanoparticles, silicon dioxide, and polyethylene glycol (PEG), was tested for its ability to remove contaminants. Analytical techniques included spectroscopy for chemical analysis and microbiological assays for contaminant quantification. Results: Post-treatment analysis revealed significant reductions in chemical contaminants, with removal efficiencies averaging 78% for calcium, 80% for magnesium, 81% for aluminum, and 76.6% for lead across all centers. Microbiological contamination was also substantially reduced, with 78–80% removal of TVC and 76–84.6% reduction in EU levels. FTIR analysis confirmed the presence of hydroxyl groups critical for adsorption, while SEM/EDX characterization revealed a crystalline structure with a particle size of 1.45 nm, pore size of 4.11 μm, filter height of 2.56 mm, and bulk density of 0.58 g/cm³. Conclusion: The TiO₂-based nanoparticle filtration system demonstrated high efficacy in removing chemical and microbiological contaminants, significantly improving water quality for hemodialysis. These results highlight its potential as a practical solution for renal centers, especially in resource-constrained settings. Further studies are needed to evaluate its long-term performance and feasibility for widespread adoption. Recommendation: Renal centers should consider adopting TiO2-based nanoparticle filters to address persistent water quality challenges. Pilot implementations across diverse settings can provide insights into operational feasibility. Additional research should explore scalability, maintenance requirements, and cost-effectiveness to optimize integration into healthcare systems. Significance Statement: This study introduces a practical and innovative solution to improve hemodialysis water purification. By effectively reducing both chemical and microbiological contaminants, the TiO2-based filtration system has the potential to enhance patient safety and outcomes, particularly in settings where maintaining high water quality standards remains challenging.展开更多
Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs...Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs）, but there are limited data on ecotoxicity to aquatic organisms. In this work, the sub-acute toxicity of TiO2-NPs to carp （Cyprinus carpio） was assessed. Superoxide dismutase （SOD）, catalase （CAT） and peroxidase （POD） activities and lipid peroxidation （LPO） levels in liver, gill and brain tissues of carps varied with concentration of TiO2-NPs suspensions and exposure time （up to 8 d）. As a result, 100 and 200 mg/L TiO2-NPs caused statistically significant decrease in SOD, CAT and POD activities and significant increase in LPO levels in tissues （P 〈 0.05）, suggesting that the fish exposed to these two concentrations of TiO2-NPs suffered from the oxidative stress. The extent of depletion of antioxidant enzymes activities and the elevation of LPO in the liver was the greatest, indicating that the liver might be the most susceptible organ to TiO2-NPs exposure. In addition, carps had gill pathologies including edema and thickening of gill lamellae as well as gill filaments, and liver pathologies including necrotic and apoptosis hepatocytes after exposed to 100 and 200 mg/L TiO2-NPs for 20 d. These results indicated a potential risk from TiO2-NPs released into the aqueous environment.展开更多
Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxid...Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles（TiO2-NPs） are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO2-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated.Initially, structural and morphological characteristics of the used TiO2-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8 nm was confirmed for the synthesized TiO2-NPs. Subsequently, entrance of TiO2-NPSto plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO2-NPs on S. polyrrhiza. The increasing concentration of TiO2-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO2-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.展开更多
The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hyd...The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.展开更多
The one-pot three-component reaction of arylmethylidenepyruvic acids, 1,3-cyclohexandiones and ammonium acetate provides an economical and efficient synthetic route to 5-oxo-4-aryl-1,4,5,6,7,8-hexahydro-2-quinolinecar...The one-pot three-component reaction of arylmethylidenepyruvic acids, 1,3-cyclohexandiones and ammonium acetate provides an economical and efficient synthetic route to 5-oxo-4-aryl-1,4,5,6,7,8-hexahydro-2-quinolinecarboxylic acid 4 under solvent-free conditions using a catalytic amount of TiO2 nanoparticles （TiO2 NPs） as an effective heterogeneous catalyst.展开更多
Green chemistry is playing an important role for synthesizing organic compounds, due to its eco-friendly nature and low cost. In green chemistry, metal nanoparticles exhibited some useful physical and chemical propert...Green chemistry is playing an important role for synthesizing organic compounds, due to its eco-friendly nature and low cost. In green chemistry, metal nanoparticles exhibited some useful physical and chemical properties （catalytic activity）. Due to its diverse properties, nanoparticles can be utilized as a catalyst in various organic reactions. Recent research has been directed towards the utilization of eco- friendly and bio-friendly plant materials in nanoparticles synthesis. In our present work, TiO2 nanoparticles （TiO2 NPs） were synthesized using Annona squamosa peel extract and their catalytic applications were studied on the 2,3-disubstituted dihydroquinazolin-4（l1H）-one synthesis. Synthesized compounds were confirmed using FT-IR.1H NMR, 13C NMR and GC-MS analyses.展开更多
In this communication, the synthesis and structural, morphological, optical, and photo-electrochemical properties of TiO2 and CaCO3/TiO2 nanoparticles as well as their applications in dye sensitized solar cells （DSSC...In this communication, the synthesis and structural, morphological, optical, and photo-electrochemical properties of TiO2 and CaCO3/TiO2 nanoparticles as well as their applications in dye sensitized solar cells （DSSCs）, have been reported. In an X-ray diffraction pattern of CaCO3/TiO2 nanoparticles, the peak at 29.41 ° of CaCO3 has been detected, demonstrating its coating on the surface of TiO2, which is further verified using high resolution-transmission electron microscopy, energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. The strong quenching in photoluminescence emission, in the case of CaCO3/TiO2 nanoparticles, has been attributed to the decrease in recombination rate of photo-generated electron-hole pairs. In the case of UV-visible reflectance spectra, the absorption edge for CaCO3/TiO2 nanoparticles has slightly been found to be blue-shifted as compared to bare TiO2 nanoparticles, which corresponds to an increase in energy band gap of the former. The dye desorption studies reveal that CaCO3/TiO2 electrodes adsorbed more dye than the bare TiO2 electrode. CaCO3/TiO2 based DSSC show improved photo- electrochemical properties compared to the bare TiO2 based DSSC as CaCO3 coating on mi02 forms an energy barrier, and, consequently suppressing the charge recombination, and, thus, improving the overall energy conversion efficiency （η） from 0.46% to 1.44% under the illumination of simulated light of 100 mW/cm2.展开更多
TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 ...TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 colloid and the composite were described.The properties of resulting materials were characterized by SEM and XRD,the photocatalytic degradation performance was tested using methylene blue(MB) as the target pollutant in aqueous solution.The results showed that the amorphous TiO_2 nanoparticles were distributed evenly on the outer surfaces of cotton fibers,which shows efficient photocatalytic properties when exposed to UV light,the degradation rate of MB reached 95.35% under the conditions of catalyst dosage 2.5 g/L,MB concentration 50 mg/L,irradiation time 120 min,and pH 10,and the photocatalytic activity of TiO_2/cotton fibers remained above 90% of its activity as-prepared after being used four times,the degradation rate of MB could reach 88.78% when irradiation time was 120 min.The photocatalytic degradation of MB could be properly described by the first-order kinetic law.By comparison of the removal rates of MB with and without UV light,it could be affirmed that the disappearance of MB was due to photodegradation rather than adsorption on cotton fibers.展开更多
Rutile TiO2 nanoparticles were synthesized using co-precipitation method with an average diameter of 30 nm TiO2 nanoparticle device was then fabricated on glass substrate.Aluminum electrodes were defined using photoli...Rutile TiO2 nanoparticles were synthesized using co-precipitation method with an average diameter of 30 nm TiO2 nanoparticle device was then fabricated on glass substrate.Aluminum electrodes were defined using photolithography and vacuum evaporation.A suspension of TiO2 nanoparticles was prepared in isopropanol using ultrasonic agitation.The nanoparticles were deposited between the electrodes.The device was tested by AC electrical measurements at 40%-90%relative humidity（RH）.The impedance of the TiO2nanoparticles decreases by about 80 times with the increase in RH from 40%to 90%at 100 Hz.The response time and the recovery time were 4 s and 5 s,respectively between 40%and 90%RH.At 100 Hz,the sensitivity of the aluminum electrode TiO2 nanoparticle device in the range of 40%—90%RH was17 MΩ/%RH.Complex modulus analysis also confirms the increase in DC conductivity of TiO2 nanoparticles as RH increases.展开更多
Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results ...Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.展开更多
A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanoco...A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanocomposite membrane of poly（vinylidene fluoride） （PVDF）/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis （TGA）. Fourier transform infrared attenuated reflection spectroscopy （FTIR-ATR） and X-ray photoelectronic spectroscopy （XPS） characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy （SEM） was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8~ of the PVDF membrane to 61.2~ of the nanocompostie membrane. Bovine serum albumin （BSA） static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-g- PNIPAAm. The maximum BSA adsorption at 40℃ was about 3 times than that at 23 ℃. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.展开更多
WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via comb...WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.展开更多
基金National Natural Science Foundation of China(No.51503031)Pujiang Project from Shanghai Science and Technology Committee,China(No.15PJ1400300)+1 种基金Scientific Research Foundation for the Returned Overseas Scholars from the Ministry of Education,China(No.15B10127)Fundamental Research Funds for the Central Universities,China(No.2232015D3-02)
文摘Ultraviolet(UV)radiation can cause degradation or aging of many polymers and shorten the working-life of their products.Thus,UV protective covers are required in various occasions.Textiles with the UV-shielding function possess unique properties compared with those covers in board or film shapes.TiO_2 nanoparticles(NPs),which were reported to have superior UV blocking function,can be used to produce UV protective covers in combination with fabric.However,efficient and environmentally friendly immobilization of TiO_2 Nps onto the fabrics is challenging.Polydopamine(PDA),a biomimetic synthetic polymer,has attracted great attentions recently due to its superior affinity to various materials and facile application procedure.Hence,in this research,the surface of nylon fabrics was modified by PDA to immobilizeTiO_2 NPs.Themodificationconditionswere systematically optimized.The immobilization of the NPs was confirmed by Fourier transform infrared spectrometer(FTIR)and scanning electron microscope(SEM).The functionalized nylon fabrics were proved to exhibit improved UV protection properties even after washing.This work provides a new and versatile surface modification technique for textiles.
文摘The apparent 1^st order rate constant of photodegradation of formaldehyde by carbon containing TiO2 nanoparticles has been investigated by numerical integration of mass transfer equation with measured degradation degree using a tubular photoreactor. The carbon containing TiO2 nanoparticles are synthesized by the oxidation of TiCl4 in propane/air flame CVD process with futile fraction up to 0.3 and carbon mass fractions up to 0.22, respectively. Thin TiO2 film is coated on the wall of the tubular reactor by sedimentation method. Effects of rutile mass fraction and carbon content have been examined on the apparent 1 ^st order rate constant and results show that, at 570ppm of formaldehyde loaded air stream, 80% relative humidity and about 100nm thin TiOa film, the 1^st order rate constant increases with increasing rutile mass fraction up to 0.3, occurs a maximum at the carbon content of about 5% by weight and is about 2.5 times of that at carbon content about zero or above 10%.
文摘The extensive application of TiO_(2)nanoparticles(NPs)highlights the importance of investigating their influence on aquatic systems.In this work,the effect of TiO_(2)NPs on heavy metals speciation was studied on a lab scale.For this goal,a series of aquaria containing water,sediment,and TiO_(2)NPs with various concentrations were set up.The study results revealed that TiO_(2)NPs caused(copper)Cu,(mercury)Hg,(titanium)Ti,and(zinc)Zn to be adsorbed by sediments in the forms of exchangeable and Fe-Mn species.According to measurements,30μg/L of TiO_(2)NPs made Cu,Hg,Ti and Zn concentration in the water column decreased from 33,1.14,20,and 32 to 4,0.58,3,and 22.3μg/L,respectively.Manganese(Mn)was also adsorbed by sediment,and in all experiments,its concentration in the water column reduced from 44 to about 20μg/L.Due to the photocatalytic capacity of TiO_(2)NPs,arsenic(As)concentration in the water column increased from 0 to 8.7μg/L with the introduction of30μg/L of TiO_(2)NPs.The sequential extraction results showed that in all experiments,concentrations of lead(Pb),nickel(Ni),and cobalt(Co)remained constant in different chemical species of sediment,which meant conservative behavior of them in presence of TiO_(2)NPs.In addition,a remarkable change was observed in water quality parameters such as ORP,TDS,TOC,BOD,NO3’and PO_(4)after the introduction of TiO_(2)NPs to aquaria.The reason behind these changes could be related to the decomposition of sediment organic content by TiO_(2)NPs.
文摘The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visible light-responsible TiO2 nanoparticles. Firstly, an Au substrate was cycled in a deoxygenated aqueous solution containing 0.1 M HCI and 60 mM anatase TiO2 nanoparticles from -0.28 to ＋1.22 V vs Ag/AgCI at 500 mV/s with 25 scans. The durations at the cathodic and anodic vertexes are 10 and 5 s, respectively. After this process, Au-and TiO2-containing complexes were left in the solution. Then a Pt electrode immediately replaced the Au working electrode, and a cathodic overpotential of 0.6 V from the Open Circuit Potential （OCP） was applied under sonification to synthesize Au nanoparticles. Encouragingly, the prepared Au nanoparticles caped with visible light-responsible TiO2 nanoparticles are more active for the decomposition of formaldehyde than pure visible light-responsible TiO2 nanoparticles are in the same condition. After 5 days testing, the formaldehyde was decomposed ca. 35% in containing Au nanoparticles caped with visible light-responsible TiO2 nanoparticles, but the formaldehyde was decomposed only ca. 25% in containing pure visible light-responsible TiO2 nanoparticles.
文摘Mesoporous TiO2 （m-TiO2） nanoparticles were used to prepare the porous film electrodes for dye-sensitized solar cells, and a second metal oxide （MgO, ZnO, A1203, or NiO） modifi- cation was carried out by dipping the m-TiO2 electrode into their respective nitrate solution followed by annealing at 500 ℃. Experimental results indicated that the above second metal oxide modifications on m-TiO2 electrode are shown in all cases to act as barrier layer for the interracial charge transfer processes, but film electron transport and interfacial charge recombination characteristics under applied bias voltage were dependent significantly on the existing states and kinds of these second metal oxides. Those changes based on sec- ond metal oxide modifications showed good correlation with the current-voltage analyses of dye-sensitized solar cell, and all modifications were found to increase the open-circuit photo- voltage in various degrees, while the MgO, ZnO, and NiO modifications result in 23%, 13%, and 6% improvement in cell conversion efficiency, respectively. The above observations indi- cate that controlling the charge transport and recombination is very important to improve the photovoltaic performance of TiO2-based solar cell.
文摘TiO2 has been tested to be toxic to DNA under the photo-irradiation of ultraviolet A （UVA）. However, in the dark conditions, after several days of treatment with TiO2 in aqueous solution, the interaction between TiO2 and two types of DNA was detected and the mechanisms were studied by the methods of gel-electrophoresis, IR spectroscopy and TEM. The results showed that the DNA would be bound to TiO2; the ratio of binding was related to the concentration and the treating time; the mechanism of binding is related to phosphate groups of DNA. Besides, DNA with different structure showed different degree of binding. These findings showed a new possible way through which the TiO2 nanoparticles interact with DNA.
基金supported by the National Key R&D Program of China (2017YFA0207301)National Natural Science Foundation of China (No.21725102, No.21471141,No.21601173)+3 种基金CAS Key Research Program of Frontier Sciences(QYZDB-SSWSLH018)CAS Interdisciplinary Innovation Team,Innovative Program of Development Foundation of Hefei Center for Physical Science and Technology (No.2016FXCX003)Anhui Provincial Natural Science Foundation (No.1608085QB24)Chinese Universities Scientific Fund (WK2310000067)
文摘Photocatalytic reduction of CO2 into various types of fuels has attracted great interest,and serves as a potential solution to addressing current global warming and energy challenges.In this work,Ag-Cu nanoparticles are densely supported on N-doped TiO2 nanowire through a straightforward nanofabrication approach.The range of light absorption by N-doped TiO2 can be tuned to match the plasmonic band of Ag nanoparticles,which allows synergizing a resonant energy transfer process with the Schottky junction.Meanwhile,Cu nanoparticles can provide active sites for the reduction of CO2 molecules.Remarkably,the performance of photocatalytic CO2 reduction is improved to produce CH4 at a rate of 720μmol·g-1·h-1 under full-spectrum irradiation.
文摘Photocatalytic multilayer nanocomposite films composed of anatase TiO2 nanoparticles and lignosulfonates （LS） were fabricated on quartz slides by the layer-by-layer （LBL） self-assembly technique. X-ray photoelectron spectroscopy （XPS）, UV-vis spectroscopy and atomic force microscopy （AFM） were used to characterize the TiO2/LS multilayer nanocomposite films. Moreover, the photocatalytic properties （decomposition of methyl orange and bacteria） of multilayer nanocomposite films were investigated. XPS results indicated that the intensities of titanium and sulfur peaks increased with the LBL deposition process. A linear increase in absorbance at 280 nm was found by UV-Vis spectroscopy, suggesting that stepwise multilayer growth occurs on the substrate and this deposition process is highly reproducible. AFM images showed that quartz slide was completely covered by TiO2 nanoparticles when a 10-bilayer multilayer film was formed. The decomposition efficiency of methyl orange by TiOz/LS multilayer films under the same UV irradiation time increased linearly with the number of TiO2 layers, and the results of decomposition of bacteria under UV irradiation showed that TiO2/LS multilayer nanocomposite films exhibited excellent decomposition activity of bacteria （Escherichia coil）.
文摘Rationale: Endotoxin contamination in conventionally purified water poses serious risks to hemodialysis patients, leading to complications such as inflammation and sepsis. Addressing these risks is essential for enhancing patient safety and meeting global dialysis water quality standards. Advanced filtration technologies, such as titanium dioxide (TiO₂)-based nanoparticle filters, offer a promising approach to improve water purification processes in renal care. Objectives: This study aimed to develop and evaluate the effectiveness of a TiO₂-based nanoparticle microporous filtration system for hemodialysis water purification. The objectives included analyzing the system’s performance in reducing chemical contaminants (calcium, magnesium, aluminum, and lead) and microbiological contaminants (total viable count [TVC] and endotoxin units [EU]) across multiple renal centers. Methods: Water samples from three renal centers (RC1, RC2, and RC3) were analyzed pre- and post-filtration. TiO₂ nanoparticles were synthesized using the sol-gel method and characterized via Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray analysis (SEM/EDX). The microporous filter, fabricated with TiO₂ nanoparticles, silicon dioxide, and polyethylene glycol (PEG), was tested for its ability to remove contaminants. Analytical techniques included spectroscopy for chemical analysis and microbiological assays for contaminant quantification. Results: Post-treatment analysis revealed significant reductions in chemical contaminants, with removal efficiencies averaging 78% for calcium, 80% for magnesium, 81% for aluminum, and 76.6% for lead across all centers. Microbiological contamination was also substantially reduced, with 78–80% removal of TVC and 76–84.6% reduction in EU levels. FTIR analysis confirmed the presence of hydroxyl groups critical for adsorption, while SEM/EDX characterization revealed a crystalline structure with a particle size of 1.45 nm, pore size of 4.11 μm, filter height of 2.56 mm, and bulk density of 0.58 g/cm³. Conclusion: The TiO₂-based nanoparticle filtration system demonstrated high efficacy in removing chemical and microbiological contaminants, significantly improving water quality for hemodialysis. These results highlight its potential as a practical solution for renal centers, especially in resource-constrained settings. Further studies are needed to evaluate its long-term performance and feasibility for widespread adoption. Recommendation: Renal centers should consider adopting TiO2-based nanoparticle filters to address persistent water quality challenges. Pilot implementations across diverse settings can provide insights into operational feasibility. Additional research should explore scalability, maintenance requirements, and cost-effectiveness to optimize integration into healthcare systems. Significance Statement: This study introduces a practical and innovative solution to improve hemodialysis water purification. By effectively reducing both chemical and microbiological contaminants, the TiO2-based filtration system has the potential to enhance patient safety and outcomes, particularly in settings where maintaining high water quality standards remains challenging.
基金supported by the China Postdoctoral Science Foundation Funded Project (No 20080431217)the Cheung Kong Scholar Program of Education Ministry of China
文摘Increasing application of nanotechnology highlights the need to clarify and understand nanotoxicity. Mammalian and in vitro studies have raised concerns about the toxicity of titanium dioxide nanoparticles （TiO2-NPs）, but there are limited data on ecotoxicity to aquatic organisms. In this work, the sub-acute toxicity of TiO2-NPs to carp （Cyprinus carpio） was assessed. Superoxide dismutase （SOD）, catalase （CAT） and peroxidase （POD） activities and lipid peroxidation （LPO） levels in liver, gill and brain tissues of carps varied with concentration of TiO2-NPs suspensions and exposure time （up to 8 d）. As a result, 100 and 200 mg/L TiO2-NPs caused statistically significant decrease in SOD, CAT and POD activities and significant increase in LPO levels in tissues （P 〈 0.05）, suggesting that the fish exposed to these two concentrations of TiO2-NPs suffered from the oxidative stress. The extent of depletion of antioxidant enzymes activities and the elevation of LPO in the liver was the greatest, indicating that the liver might be the most susceptible organ to TiO2-NPs exposure. In addition, carps had gill pathologies including edema and thickening of gill lamellae as well as gill filaments, and liver pathologies including necrotic and apoptosis hepatocytes after exposed to 100 and 200 mg/L TiO2-NPs for 20 d. These results indicated a potential risk from TiO2-NPs released into the aqueous environment.
文摘Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles（TiO2-NPs） are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO2-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated.Initially, structural and morphological characteristics of the used TiO2-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8 nm was confirmed for the synthesized TiO2-NPs. Subsequently, entrance of TiO2-NPSto plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO2-NPs on S. polyrrhiza. The increasing concentration of TiO2-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO2-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.
文摘The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.
文摘The one-pot three-component reaction of arylmethylidenepyruvic acids, 1,3-cyclohexandiones and ammonium acetate provides an economical and efficient synthetic route to 5-oxo-4-aryl-1,4,5,6,7,8-hexahydro-2-quinolinecarboxylic acid 4 under solvent-free conditions using a catalytic amount of TiO2 nanoparticles （TiO2 NPs） as an effective heterogeneous catalyst.
基金support extended by VIT-SIF for NMR and GC-MS analysisDBT-RGYI project(No. BT/PR6891/GBT/27/491/2012)fund
文摘Green chemistry is playing an important role for synthesizing organic compounds, due to its eco-friendly nature and low cost. In green chemistry, metal nanoparticles exhibited some useful physical and chemical properties （catalytic activity）. Due to its diverse properties, nanoparticles can be utilized as a catalyst in various organic reactions. Recent research has been directed towards the utilization of eco- friendly and bio-friendly plant materials in nanoparticles synthesis. In our present work, TiO2 nanoparticles （TiO2 NPs） were synthesized using Annona squamosa peel extract and their catalytic applications were studied on the 2,3-disubstituted dihydroquinazolin-4（l1H）-one synthesis. Synthesized compounds were confirmed using FT-IR.1H NMR, 13C NMR and GC-MS analyses.
基金the University Grants Commission(UGC)for the research funding vide sanction letter No.F.No.39-533/2010(SR)of January 2011
文摘In this communication, the synthesis and structural, morphological, optical, and photo-electrochemical properties of TiO2 and CaCO3/TiO2 nanoparticles as well as their applications in dye sensitized solar cells （DSSCs）, have been reported. In an X-ray diffraction pattern of CaCO3/TiO2 nanoparticles, the peak at 29.41 ° of CaCO3 has been detected, demonstrating its coating on the surface of TiO2, which is further verified using high resolution-transmission electron microscopy, energy dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy. The strong quenching in photoluminescence emission, in the case of CaCO3/TiO2 nanoparticles, has been attributed to the decrease in recombination rate of photo-generated electron-hole pairs. In the case of UV-visible reflectance spectra, the absorption edge for CaCO3/TiO2 nanoparticles has slightly been found to be blue-shifted as compared to bare TiO2 nanoparticles, which corresponds to an increase in energy band gap of the former. The dye desorption studies reveal that CaCO3/TiO2 electrodes adsorbed more dye than the bare TiO2 electrode. CaCO3/TiO2 based DSSC show improved photo- electrochemical properties compared to the bare TiO2 based DSSC as CaCO3 coating on mi02 forms an energy barrier, and, consequently suppressing the charge recombination, and, thus, improving the overall energy conversion efficiency （η） from 0.46% to 1.44% under the illumination of simulated light of 100 mW/cm2.
基金Supported by Foundation of Educational Bureau of Liaoning Province (No2008573)
文摘TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 colloid and the composite were described.The properties of resulting materials were characterized by SEM and XRD,the photocatalytic degradation performance was tested using methylene blue(MB) as the target pollutant in aqueous solution.The results showed that the amorphous TiO_2 nanoparticles were distributed evenly on the outer surfaces of cotton fibers,which shows efficient photocatalytic properties when exposed to UV light,the degradation rate of MB reached 95.35% under the conditions of catalyst dosage 2.5 g/L,MB concentration 50 mg/L,irradiation time 120 min,and pH 10,and the photocatalytic activity of TiO_2/cotton fibers remained above 90% of its activity as-prepared after being used four times,the degradation rate of MB could reach 88.78% when irradiation time was 120 min.The photocatalytic degradation of MB could be properly described by the first-order kinetic law.By comparison of the removal rates of MB with and without UV light,it could be affirmed that the disappearance of MB was due to photodegradation rather than adsorption on cotton fibers.
文摘Rutile TiO2 nanoparticles were synthesized using co-precipitation method with an average diameter of 30 nm TiO2 nanoparticle device was then fabricated on glass substrate.Aluminum electrodes were defined using photolithography and vacuum evaporation.A suspension of TiO2 nanoparticles was prepared in isopropanol using ultrasonic agitation.The nanoparticles were deposited between the electrodes.The device was tested by AC electrical measurements at 40%-90%relative humidity（RH）.The impedance of the TiO2nanoparticles decreases by about 80 times with the increase in RH from 40%to 90%at 100 Hz.The response time and the recovery time were 4 s and 5 s,respectively between 40%and 90%RH.At 100 Hz,the sensitivity of the aluminum electrode TiO2 nanoparticle device in the range of 40%—90%RH was17 MΩ/%RH.Complex modulus analysis also confirms the increase in DC conductivity of TiO2 nanoparticles as RH increases.
文摘Ce-doped titanium oxide nanoparticles were investigated in the paper. The surface structures of undoped and Ce-doped TiO2 nanoparticles were observed by scanning tunneling microscopy （STM）. The experimental results of scanning tunneling spectroscopy （STS） show that the surface electronic structures of TiO2 nanoparticles are modified by introducing new electronic states in the surface band gap through cerium ion doping. The results are discussed in terms of the influence of doping concentration on the surface band gap of TiO2.
基金financially supported by the National Natural Science Foundation of China(No.51303028)the Natural Science Foundation of Fujian Province(No.2011J01044)
文摘A novel hydrophilic nanocomposite additive （TiO2-g-PNIPAAm） was synthesized by the surface modification of titanium dioxide （TiO2） with N-isopropylacrylamide （NIPAAm） via ＂graft-from＂ technique. And the nanocomposite membrane of poly（vinylidene fluoride） （PVDF）/TiO2-g-PNIPAAm was fabricated by wet phase inversion. The graft degree was obtained by thermo-gravimetric analysis （TGA）. Fourier transform infrared attenuated reflection spectroscopy （FTIR-ATR） and X-ray photoelectronic spectroscopy （XPS） characterization results suggested that TiO2-g-PNIPAAm nanoparticles segregated on membrane surface during the phase separation process. Scanning electron microscopy （SEM） was conducted to investigate the surface and cross-section of the modified membranes. The water contact angle measurements confirmed that TiO2-g-PNIPAAm nanoparticles endowed PVDF membranes better hydrophlilicity and thermo-responsive properties compared with those of the pristine PVDF membrane. The water contact angle decreased from 92.8~ of the PVDF membrane to 61.2~ of the nanocompostie membrane. Bovine serum albumin （BSA） static and dynamic adsorption experiments suggested that excellent antifouling properties of membranes was acquired after adding TiO2-g- PNIPAAm. The maximum BSA adsorption at 40℃ was about 3 times than that at 23 ℃. The permeation experiments indicated the water flux recover ratio and BSA rejection ratio were improved at different temperatures.
文摘WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.
