Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeol...Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.展开更多
TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement l...TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.展开更多
Hierarchically porous anatase Ti02 microspheres composited with carbonaceous species （TCS） have been successfully fabricated by a one-step template-free solvothermal method, combined with subsequent low temperature ...Hierarchically porous anatase Ti02 microspheres composited with carbonaceous species （TCS） have been successfully fabricated by a one-step template-free solvothermal method, combined with subsequent low temperature dried process. In this configuration, the TCS microspheres are constructed by the intercon- nected porous nanosheets, which are further assembled with abundant nanoparticles and carbonaceous species. Such composite microspheres possess a large specific surface area of 337 m2 g-l, uniform mesopores of 3.37 nm and high total pore volumes of 0.275 cm3 g-1. The materials exhibit the enhanced photocatalytic properties and stability for degradation of rhodamine B （RhB） under visible-light irradiation. The enhanced photocatalytic degradation performance may be ascribed to their abundant porous structure, large specific surface area and the unique assist-function of the carbonaceous species.展开更多
Solar‐powered semiconductor photocatalysis is considered a powerful strategy for addressing environmental pollution and energy crisis.Nevertheless,the separation and transfer abilities of photogenerated photocatalyst...Solar‐powered semiconductor photocatalysis is considered a powerful strategy for addressing environmental pollution and energy crisis.Nevertheless,the separation and transfer abilities of photogenerated photocatalysts remain unsatisfactory.Herein,dual Ti_(3)C_(2)nanosheets/Ag co‐catalysts synergistically decorated hierarchical flower‐like TiO_(2)microspheres for boosting photocatalytic H_(2)production were fabricated by electrostatic self‐assembly and subsequent photoreduction procedures.The optimal Ag/Ti_(3)C_(2)/TiO_(2)composite demonstrated an excellent photocatalytic H_(2)‐production rate of 1024.72μmol g^(−1)h^(−1)under simulated solar irradiation,achieving nearly 40,2.3,and 1.8 folds with respect to that obtained on pristine TiO2,optimized Ti_(3)C_(2)/TiO_(2)composite,and Ag/TiO_(2)composite,respectively.The considerably improved photocatalytic H_(2)‐production activity is associated with the synergistic effect of the hierarchical flower‐like structure of TiO2,excellent electrical conductivity of Ti_(3)C_(2),and surface plasmon resonance effect of Ag,which enhances the light absorption capacity and promotes the separation and transfer of photogenerated carriers.This study provides insight into the design of high‐efficiency photocatalysts with dual co‐catalysts for solar H_(2)production.展开更多
TiO2hollow microspheres(TiO2‐HMSs)have attracted much attention because of their high photoreactivity,low density,and good permeability.However,anatase TiO2‐HMSs have poor thermal stability.In this study,surface‐fl...TiO2hollow microspheres(TiO2‐HMSs)have attracted much attention because of their high photoreactivity,low density,and good permeability.However,anatase TiO2‐HMSs have poor thermal stability.In this study,surface‐fluorinated TiO2‐HMSs were assembled from hollow nanoparticles by the hydrothermal reaction of the mixed Ti(SO4)2–NH4HF–H2O2solution at180°C.The effect of the calcination temperature on the structure and photoreactivity of the TiO2‐HMSs was systematically investigated,which was evaluated by photocatalytic oxidation of acetone in air under ultraviolet irradiation.We found that after calcination at300°C,the photoreactivity of the TiO2‐HMSs decreases from1.39×10?3min?1(TiO2‐HMS precursor)to0.82×10?3min?1because of removal of surface‐adsorbed fluoride ions.With increasing calcination temperature from300to900°C,the building blocks of the TiO2‐HMSs evolve from truncated bipyramidal shaped hollow nanoparticles to round solid nanoparticles,and the photoreactivity of the TiO2‐HMSs steady increases from0.82×10?3to2.09×10?3min?1because of enhanced crystallization.Further increasing the calcination temperature to1000and1100°C results in a decrease of the photoreactivity,which is ascribed to a sharp decrease of the Brunauer–Emmett–Teller surface area and the beginning of the anatase–rutile phase transformation at1100°C.The effect of surface‐adsorbed fluoride ions on the thermal stability of the TiO2‐HMSs is also discussed.展开更多
Porous titanium dioxide(TiO_2) microspheres(MS) were prepared by a facile ultrasonic spray pyrolysis process with commercial colloidal silica as a sacrificial template. The morphology structure, Brunauer–Emmett–Tell...Porous titanium dioxide(TiO_2) microspheres(MS) were prepared by a facile ultrasonic spray pyrolysis process with commercial colloidal silica as a sacrificial template. The morphology structure, Brunauer–Emmett–Teller surface areas and pore size distribution of TiO_2 microspheres were studied by changing the content and diameter of the silica template in detail. These porous micro-sized MS are composed of anatase TiO_2 nanocrystallites of 5–10 nm and have unique bimodal mesopores. The largest specific surface area of 112.3 m^2/g has been achieved using 60 wt% 20 nm silica as a template.When used as photocatalysts, the best photocatalytic activity of the as-prepared porous MS is comparable to commercial P25 nanopowders. Moreover, the micro-size and tailored properties from the design that appear during the ultrasonic spray pyrolysis process give these porous MS a promising application in photocatalytic reaction.展开更多
For the first time the preparation of the N-doped TiO2-coated NaY zeolite membrane（N-doped TiO2/NaY zeolite membrane） as an electrode material for photoelectrocatalysis has been achieved and reported.The XRD, SEM, U...For the first time the preparation of the N-doped TiO2-coated NaY zeolite membrane（N-doped TiO2/NaY zeolite membrane） as an electrode material for photoelectrocatalysis has been achieved and reported.The XRD, SEM, UV–vis and XPS techniques were used to characterize the structure of the N-doped TiO2/NaY zeolite membrane. The results verified that the surface of the N-doped TiO2/NaY zeolite membrane was coated by TiO2 nanoparticles of ca. 20 nm size and exhibited a distinct red-shift in the UV–vis spectra compared to N-doped TiO2. The photoelectrocatalysis performance of the N-doped TiO2/NaY zeolite membrane electrode was evaluated by phenol degradation. The results revealed it is a promising novel electrode material for application of photoelectrocatalysis in the removal of organic contaminants in waste water.展开更多
A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter ...A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter as nanoparticles with the formation of the SiO Ti bonds.The growth mechanism accounting for the formation of the TiO2 nanolayers was proposed.The morphology,composition,thermal insulation properties,and visible-near infrared(VIS-NIR)refl ectance of the HGMs/TiO2 composite hollow spheres were characterized.The VIS-NIR reflectance of the HGMs/TiO2 composite hollow spheres increased by more than 30%compared to raw HGMs.The thermal conductivity of the particles is 0.058 W/(m K).The result indicates that the VIS-NIR reflectance of the composite hollow spheres is strongly influenced by the coating of TiO2.The composite hollow spheres were used as the main functional filler to prepare the organic-inorganic composite coatings.The glass substrates coated by the organic-inorganic coatings had lower thermal conductivity and higher near infrared reflectivity.Therefore,the HGMs/TiO2 composite hollow spheres can reflect most of the solar energy and effectively keep out the heat as a thermal insulation coating for energy-saving constructions.展开更多
Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orth...Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orthomono- chlorphenol solutions by ultraviolet, the strong adsorption capability of the zeolite results in increased concentration of substrate on its surface. The Ti（h film coated on feather zeolite further enhances the photocatalytic activity. The TiO~ film on the zeolite prepared by the Sol-gel method is found more effective as a catalyst than that by two powder coating methods.展开更多
The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained struc...The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained structure was composed of a SiO2@Fe3O4 core and a porous TiO2 shell.The diameter of SiO2@Fe3O4 core was about 205 nm with thickness of porous TiO2 of about 5-6 nm.The 9%TiO2/6%SiO2@Fe3O4 microspheres possess the highest BET surface area and the BJH pore volume,which are 373.5 m2.g-1 and 0.28 cm3.g-1,respectively.The 9%TiO2/6%SiO2@Fe3O4 photocatalyst exhibited an excellent performance for the degradation of methyl orange and methylene blue dyes.Two different dyes were completely decolorized in 60 min under UV irradiation.The photocatalytic activity and the amount of catalyst were almost not decrease after recycling for 6 times by using external magnetic field.展开更多
Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET an...Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET and SEM.Photodegradation of omethoate was studied with H2O2 as oxidant and TiO2 supported on NaY zeolite as photocatalyst.Parameters involved in the photo-catalysis of omethoate,i.e.,the calcination temperature of the photocatalyst,initial omethoate concentration,the amount of TiO2 loaded on NaY zeolite,photocatalyst dosage and H2O2 concentration were investigated in detail.The results show that TiO2/NaY zeolite prepared by means of sol-gel method exhibited a good photocatalytic activity for the degradation of omethoate.Optimum conditions included the calcination temperature of photocatalyst 550℃,initial omethoate concentration 500 mg/L,the amount of TiO2 loaded on NaY zeolite 35%（mass fraction）,the amount of photocatalyst 5 g/L,H2O2 concentration 30 mL/L and an irradiation time of 180 min.The removal of omethoate was up to 93%.Kinetics parameters of the photocatalytic degradation of omethoate were measured and calculated.The result shows the kinetics of photocatalytic degradation of omethoate is first-order.展开更多
Bandgap engineering by doping and co‐catalyst loading are two primary approaches to designing efficient photocatalysts by promoting visible‐light absorption and charge separation,respectively.Shifting of the TiO2con...Bandgap engineering by doping and co‐catalyst loading are two primary approaches to designing efficient photocatalysts by promoting visible‐light absorption and charge separation,respectively.Shifting of the TiO2conduction band edge is frequently applied to increase visible‐light absorption but also lowers the reductive properties of photo‐excited electrons.Herein,we report a visible‐light‐driven photocatalyst based on valance band edge control induced by oxygen excess defects and modification with a CuxO electron transfer co‐catalyst.The CuxO grafted oxygen‐rich TiO2microspheres were prepared by ultrasonic spray pyrolysis of the peroxotitanate precursor followed by a wet chemical impregnated treatment.We found that oxygen excess defects in TiO2shifted the valence band maximum upward and improved the visible‐light absorption.The CuxO grafted onto the surface acted as a co‐catalyst that efficiently reduced oxygen molecules to active intermediates(i.e.,O2??radial and H2O2),thus consuming the photo‐generated electrons.Consequently,the CuxO grafted oxygen‐rich TiO2microspheres achieved a photocatalytic activity respectively8.6,13.0and11.0as times high as those of oxygen‐rich TiO2,normal TiO2and CuxO grafted TiO2,for degradation of gaseous acetaldehyde under visible‐light irradiation.Our results suggest that high visible‐light photocatalytic efficiency can be achieved by combining oxygen excess defects to improve visible‐light absorption together with a CuxO electron transfer co‐catalyst.These findings provide a new approach to developing efficient heterojunction photocatalysts.展开更多
Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, ...Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.展开更多
Hollow glass microspheres(HGMs)have great potential in building energy-saving and industrial insulation.Anatase TiO2-modified HGMs were prepared by a sol-gel method in acetic acid-ethanol solution.Scanning electron mi...Hollow glass microspheres(HGMs)have great potential in building energy-saving and industrial insulation.Anatase TiO2-modified HGMs were prepared by a sol-gel method in acetic acid-ethanol solution.Scanning electron microscopy,X-ray diffraction,zeta-potential measurements,nitrogen-sorption measurements,and Fourier-transform infrared and ultraviolet-visible-near-infrared diffuse reflectance spectroscopies showed that the alkali modification of the HGMs greatly influenced the loading and microstructure of the TiO2 film.The TiO2 loading could be accurately controlled by ethanol addition and the TiO2 coating time.A mechanism for the TiO2 coating of the HGM surface is proposed.The synergistic action of hydrogen bonding and electrostatic forces resulted in close contact between the HGMs and TiO2 sol at pH 3.5.The effects of different TiO2 loading rates on the reflective and thermal insulation properties were studied.The near-infrared reflectance of 15.9%TiO2 coated on HGMs was 96.27%,and the inner surface temperature of the composite pigment coated on aluminum board was reduced by 22.4℃.The TiO2/HGM composite pigments exhibited excellent solar reflective and thermal insulation properties,so have potential in the construction of exterior walls and roofs.展开更多
基金Funded by the Science Foundation of Hubei Province of China(2015CFB706)。
文摘Artificial zeolite was modified by nano-Fe3O4 for development of functional adsorbents.Subsequently,adsorbents such as calcium cross-linked nano-Fe3O4 microspheres (Ca-MS),calcium cross-linked nano-Fe3O4 modified zeolite microspheres (Ca-MZS) and iron cross-linked nano-Fe3O4 modified zeolite microspheres (Fe-MZS) were prepared and compared for their adsorption performance.The effects of adsorbent dosage,solution pH,initial concentration and ion content on the removal of Cu^2+ from wastewater are investigated,and the adsorption kinetics and isotherms for the adsorbent materials were analyzed.The experimental results indicate that for the initial concentration of Cu^2+ of 30 mg/L,the adsorption is noted to be most stable.The optimal initial pH for adsorbing Cu^2+ is observed to be 5.5.At an optimal dosage of Ca-MZS of 900 mg/L,the adsorption capacity is measured to be 28.25 mg/g,along with the removal rate of 72.49%.The addition of Na+ and K+ affects the adsorption of Cu^2+.For the Na^+ and K^+ concentration of 0.2 mmol/L,the Cu^2+ removal rate by Ca-MZS drops to 11.94% and 22.12%,respectively.As compared with the adsorbents such as Natural Zeolite (NZ),Ca-MS and Fe-MZS,Ca-MZS demonstrates the best removal effect in solution,where the removal rate reaches 84.27%,with the maximum adsorption capacity of 28.09 mg/g.The Cu^2+ adsorption kinetics of Ca-MZS is observed to follow the Elovich kinetic model,with the adsorption isotherm data fitting the Freundlich isotherm model by using the non-linear method.
基金supported by the National Natural Science Foundation of China(21773031)the Natural Science Foundation of Fujian Province(2018J01686)the State Key Laboratory of Photocatalysis on Energy and Environment(SKLPEE-2017A01 and SKLPEE-2017B02)~~
文摘TiO2@Ni(OH)2 core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)2 nanoflakes on the surfaces of TiO2 microspheres;this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.
基金financially supported by the National Natural Science Foundation of China(Nos.61271126,21547012 and 21305033)the Program for Innovative Research Team in University(No.IRT-1237)+2 种基金the Program for Science and Technology Project of Heilongjiang province(Nos.B201414 and B2015008)the Heilongjiang Educational Department(No.2013TD002,2011CJHB006,12531506)the Youth Foundation of Harbin(No.2015QQQXJ047)
文摘Hierarchically porous anatase Ti02 microspheres composited with carbonaceous species （TCS） have been successfully fabricated by a one-step template-free solvothermal method, combined with subsequent low temperature dried process. In this configuration, the TCS microspheres are constructed by the intercon- nected porous nanosheets, which are further assembled with abundant nanoparticles and carbonaceous species. Such composite microspheres possess a large specific surface area of 337 m2 g-l, uniform mesopores of 3.37 nm and high total pore volumes of 0.275 cm3 g-1. The materials exhibit the enhanced photocatalytic properties and stability for degradation of rhodamine B （RhB） under visible-light irradiation. The enhanced photocatalytic degradation performance may be ascribed to their abundant porous structure, large specific surface area and the unique assist-function of the carbonaceous species.
文摘Solar‐powered semiconductor photocatalysis is considered a powerful strategy for addressing environmental pollution and energy crisis.Nevertheless,the separation and transfer abilities of photogenerated photocatalysts remain unsatisfactory.Herein,dual Ti_(3)C_(2)nanosheets/Ag co‐catalysts synergistically decorated hierarchical flower‐like TiO_(2)microspheres for boosting photocatalytic H_(2)production were fabricated by electrostatic self‐assembly and subsequent photoreduction procedures.The optimal Ag/Ti_(3)C_(2)/TiO_(2)composite demonstrated an excellent photocatalytic H_(2)‐production rate of 1024.72μmol g^(−1)h^(−1)under simulated solar irradiation,achieving nearly 40,2.3,and 1.8 folds with respect to that obtained on pristine TiO2,optimized Ti_(3)C_(2)/TiO_(2)composite,and Ag/TiO_(2)composite,respectively.The considerably improved photocatalytic H_(2)‐production activity is associated with the synergistic effect of the hierarchical flower‐like structure of TiO2,excellent electrical conductivity of Ti_(3)C_(2),and surface plasmon resonance effect of Ag,which enhances the light absorption capacity and promotes the separation and transfer of photogenerated carriers.This study provides insight into the design of high‐efficiency photocatalysts with dual co‐catalysts for solar H_(2)production.
基金supported by the National Natural Science Foundation of China(51672312,21373275)the Science and Technology Program of Wuhan,China(2016010101010018,2015070504020220)the Dean’s Research Fund–04257 from the Education University of Hong Kong~~
文摘TiO2hollow microspheres(TiO2‐HMSs)have attracted much attention because of their high photoreactivity,low density,and good permeability.However,anatase TiO2‐HMSs have poor thermal stability.In this study,surface‐fluorinated TiO2‐HMSs were assembled from hollow nanoparticles by the hydrothermal reaction of the mixed Ti(SO4)2–NH4HF–H2O2solution at180°C.The effect of the calcination temperature on the structure and photoreactivity of the TiO2‐HMSs was systematically investigated,which was evaluated by photocatalytic oxidation of acetone in air under ultraviolet irradiation.We found that after calcination at300°C,the photoreactivity of the TiO2‐HMSs decreases from1.39×10?3min?1(TiO2‐HMS precursor)to0.82×10?3min?1because of removal of surface‐adsorbed fluoride ions.With increasing calcination temperature from300to900°C,the building blocks of the TiO2‐HMSs evolve from truncated bipyramidal shaped hollow nanoparticles to round solid nanoparticles,and the photoreactivity of the TiO2‐HMSs steady increases from0.82×10?3to2.09×10?3min?1because of enhanced crystallization.Further increasing the calcination temperature to1000and1100°C results in a decrease of the photoreactivity,which is ascribed to a sharp decrease of the Brunauer–Emmett–Teller surface area and the beginning of the anatase–rutile phase transformation at1100°C.The effect of surface‐adsorbed fluoride ions on the thermal stability of the TiO2‐HMSs is also discussed.
基金supported by the National Natural Science Foundation of China (Nos. 21236003, 21506125, 91534202 and 91534122)the Basic Research Program of Shanghai (14JC1490700)+1 种基金the China Postdoctoral Science Foundation (2014M561497 and 2014M560307)the Fundamental Research Funds for the Central Universities
文摘Porous titanium dioxide(TiO_2) microspheres(MS) were prepared by a facile ultrasonic spray pyrolysis process with commercial colloidal silica as a sacrificial template. The morphology structure, Brunauer–Emmett–Teller surface areas and pore size distribution of TiO_2 microspheres were studied by changing the content and diameter of the silica template in detail. These porous micro-sized MS are composed of anatase TiO_2 nanocrystallites of 5–10 nm and have unique bimodal mesopores. The largest specific surface area of 112.3 m^2/g has been achieved using 60 wt% 20 nm silica as a template.When used as photocatalysts, the best photocatalytic activity of the as-prepared porous MS is comparable to commercial P25 nanopowders. Moreover, the micro-size and tailored properties from the design that appear during the ultrasonic spray pyrolysis process give these porous MS a promising application in photocatalytic reaction.
基金supported by the Talent Introduction Fund of Yangzhou University(2012),Jiangsu Province Science and Technology Support Project(No.BE2014613)Six Big Peak Talent in Jiangsu Province(No.2014-XCL-013)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘For the first time the preparation of the N-doped TiO2-coated NaY zeolite membrane（N-doped TiO2/NaY zeolite membrane） as an electrode material for photoelectrocatalysis has been achieved and reported.The XRD, SEM, UV–vis and XPS techniques were used to characterize the structure of the N-doped TiO2/NaY zeolite membrane. The results verified that the surface of the N-doped TiO2/NaY zeolite membrane was coated by TiO2 nanoparticles of ca. 20 nm size and exhibited a distinct red-shift in the UV–vis spectra compared to N-doped TiO2. The photoelectrocatalysis performance of the N-doped TiO2/NaY zeolite membrane electrode was evaluated by phenol degradation. The results revealed it is a promising novel electrode material for application of photoelectrocatalysis in the removal of organic contaminants in waste water.
文摘A hollow glass microsphere(HGM)/TiO2 composite hollow sphere was successfully prepared via a simple precipitation method.The TiO2 coating layers grew on the surface of the HGMs that range from 20 to 50μm in diameter as nanoparticles with the formation of the SiO Ti bonds.The growth mechanism accounting for the formation of the TiO2 nanolayers was proposed.The morphology,composition,thermal insulation properties,and visible-near infrared(VIS-NIR)refl ectance of the HGMs/TiO2 composite hollow spheres were characterized.The VIS-NIR reflectance of the HGMs/TiO2 composite hollow spheres increased by more than 30%compared to raw HGMs.The thermal conductivity of the particles is 0.058 W/(m K).The result indicates that the VIS-NIR reflectance of the composite hollow spheres is strongly influenced by the coating of TiO2.The composite hollow spheres were used as the main functional filler to prepare the organic-inorganic composite coatings.The glass substrates coated by the organic-inorganic coatings had lower thermal conductivity and higher near infrared reflectivity.Therefore,the HGMs/TiO2 composite hollow spheres can reflect most of the solar energy and effectively keep out the heat as a thermal insulation coating for energy-saving constructions.
文摘Ti02 coatings on natural feather zeolite are respectively prepared by a collosol （Sol-gel） method and two powder coating methods with deionizod water or dehydrated ethanol as a dispersant. During degradation of orthomono- chlorphenol solutions by ultraviolet, the strong adsorption capability of the zeolite results in increased concentration of substrate on its surface. The Ti（h film coated on feather zeolite further enhances the photocatalytic activity. The TiO~ film on the zeolite prepared by the Sol-gel method is found more effective as a catalyst than that by two powder coating methods.
基金Supported by the National Natural Science Foundation of China（21173018,20473009）
文摘The core-shell structured TiO2/SiO2 @Fe3O4 photocatalysts were prepared using Fe3O4 as magnetic core,tetraethoxysilane（TEOS） as silica source and tetrabutyl titanate（TBOT） as titanium sources.The as-obtained structure was composed of a SiO2@Fe3O4 core and a porous TiO2 shell.The diameter of SiO2@Fe3O4 core was about 205 nm with thickness of porous TiO2 of about 5-6 nm.The 9%TiO2/6%SiO2@Fe3O4 microspheres possess the highest BET surface area and the BJH pore volume,which are 373.5 m2.g-1 and 0.28 cm3.g-1,respectively.The 9%TiO2/6%SiO2@Fe3O4 photocatalyst exhibited an excellent performance for the degradation of methyl orange and methylene blue dyes.Two different dyes were completely decolorized in 60 min under UV irradiation.The photocatalytic activity and the amount of catalyst were almost not decrease after recycling for 6 times by using external magnetic field.
基金Supported by the Natural Science Foundation of Hebei Province,China(No.203364)
文摘Photocatalytic activities of TiO2 and NaY zeolites-supported TiO2 were investigated with omethoate as a model pollutant.The physical and chemical states of NaY zeolite-supported TiO2 were evaluated via XRD,FTIR,BET and SEM.Photodegradation of omethoate was studied with H2O2 as oxidant and TiO2 supported on NaY zeolite as photocatalyst.Parameters involved in the photo-catalysis of omethoate,i.e.,the calcination temperature of the photocatalyst,initial omethoate concentration,the amount of TiO2 loaded on NaY zeolite,photocatalyst dosage and H2O2 concentration were investigated in detail.The results show that TiO2/NaY zeolite prepared by means of sol-gel method exhibited a good photocatalytic activity for the degradation of omethoate.Optimum conditions included the calcination temperature of photocatalyst 550℃,initial omethoate concentration 500 mg/L,the amount of TiO2 loaded on NaY zeolite 35%（mass fraction）,the amount of photocatalyst 5 g/L,H2O2 concentration 30 mL/L and an irradiation time of 180 min.The removal of omethoate was up to 93%.Kinetics parameters of the photocatalytic degradation of omethoate were measured and calculated.The result shows the kinetics of photocatalytic degradation of omethoate is first-order.
基金supported by the National Natural Science Foundation of China(51072032,51372036,51702235)~~
文摘Bandgap engineering by doping and co‐catalyst loading are two primary approaches to designing efficient photocatalysts by promoting visible‐light absorption and charge separation,respectively.Shifting of the TiO2conduction band edge is frequently applied to increase visible‐light absorption but also lowers the reductive properties of photo‐excited electrons.Herein,we report a visible‐light‐driven photocatalyst based on valance band edge control induced by oxygen excess defects and modification with a CuxO electron transfer co‐catalyst.The CuxO grafted oxygen‐rich TiO2microspheres were prepared by ultrasonic spray pyrolysis of the peroxotitanate precursor followed by a wet chemical impregnated treatment.We found that oxygen excess defects in TiO2shifted the valence band maximum upward and improved the visible‐light absorption.The CuxO grafted onto the surface acted as a co‐catalyst that efficiently reduced oxygen molecules to active intermediates(i.e.,O2??radial and H2O2),thus consuming the photo‐generated electrons.Consequently,the CuxO grafted oxygen‐rich TiO2microspheres achieved a photocatalytic activity respectively8.6,13.0and11.0as times high as those of oxygen‐rich TiO2,normal TiO2and CuxO grafted TiO2,for degradation of gaseous acetaldehyde under visible‐light irradiation.Our results suggest that high visible‐light photocatalytic efficiency can be achieved by combining oxygen excess defects to improve visible‐light absorption together with a CuxO electron transfer co‐catalyst.These findings provide a new approach to developing efficient heterojunction photocatalysts.
文摘Arsenic is a natural tasteless and odourless element,existing in the earth's crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.
基金This study was financially supported by the National Natural Science Foundation of China(Grant No.21476267)the Hunan Natural Science foundation(Grant No.2018JJ2482).
文摘Hollow glass microspheres(HGMs)have great potential in building energy-saving and industrial insulation.Anatase TiO2-modified HGMs were prepared by a sol-gel method in acetic acid-ethanol solution.Scanning electron microscopy,X-ray diffraction,zeta-potential measurements,nitrogen-sorption measurements,and Fourier-transform infrared and ultraviolet-visible-near-infrared diffuse reflectance spectroscopies showed that the alkali modification of the HGMs greatly influenced the loading and microstructure of the TiO2 film.The TiO2 loading could be accurately controlled by ethanol addition and the TiO2 coating time.A mechanism for the TiO2 coating of the HGM surface is proposed.The synergistic action of hydrogen bonding and electrostatic forces resulted in close contact between the HGMs and TiO2 sol at pH 3.5.The effects of different TiO2 loading rates on the reflective and thermal insulation properties were studied.The near-infrared reflectance of 15.9%TiO2 coated on HGMs was 96.27%,and the inner surface temperature of the composite pigment coated on aluminum board was reduced by 22.4℃.The TiO2/HGM composite pigments exhibited excellent solar reflective and thermal insulation properties,so have potential in the construction of exterior walls and roofs.
