In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated c...In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated carbon （SAC） supported photocatalyst doped with upconversion luminescence agent Er3＋：YAlO3 was prepared by immobilizing Er3＋：YAlO3/TiO2, which was obtained by combination of Er3＋：YAlO3 and TiO2 using sol-gel method, on the surface of SAC. The crystal phase composition, surface structure and element distribution, and light absorption of the new photocatalysts were examined by X-ray diffraction （XRD）, energy dispersive X-ray spectra （EDS） analysis, scanning electron microscopy （SEM） and fluorescence spectra analysis （FSA）. The photocatalytic oxidation activity of the photocatalysts was also evaluated by the photodegradation of methyl orange （MO） in aqueous solution under visible light irradiation from a LED lamp （λ400 nm）. The results showed that Er3＋：YAlO3 could perform as the upconversion luminescence agent which converts the visible light up to ultraviolet light. The Er3＋：YAlO3/TiO2 calcinated at 700 °C revealed the highest photocatalytic activity. The apparent reaction rate constant could reach 0.0197 min-1 under visible light irradiation.展开更多
TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to es...TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.展开更多
To improve the oxidation resistance of boron-modified carbon foams, the B2O3 coating was prepared on boron-modified carbon foams by low-cost slurry method. The microstructures and phase compositions of the coated carb...To improve the oxidation resistance of boron-modified carbon foams, the B2O3 coating was prepared on boron-modified carbon foams by low-cost slurry method. The microstructures and phase compositions of the coated carbon foams were characterized by scanning electron microscopy and X-ray diffraction, respectively. Oxidation resistances of uncoated and coated boron-modified carbon foams were investigated at 873 K in air. The results showed that as-received B2O3 coating could protect boron-modified carbon foams from oxidation at 873 K. B2O3-coated carbon foam doped with 7% B2O3 （mass fraction） （BO-7） had better oxidation resistance, exhibiting mass loss of 17.40% after oxidation at 873 K for 120 min. The melting glass layer formed on the surface of BO-7 could prevent oxygen from diffusing into boron-modified carbon foams substrate during oxidation to some extent.展开更多
Carbon dots(Cdots)with a broad light absorption range could be a potential stable sensitizer for TiO2,which is an excellent ultraviolet(UV)response photocatalyst.Herein,we systematically investigated the different col...Carbon dots(Cdots)with a broad light absorption range could be a potential stable sensitizer for TiO2,which is an excellent ultraviolet(UV)response photocatalyst.Herein,we systematically investigated the different color emissive Cdots-sensitized TiO2 for H2 production.Firstly,all kinds of Cdots enhanced the photocatalytic properties of TiO2.All the Cdots-sensitized TiO2 exhibits visible light H2 production due to their absorption in the visible light region.The photocurrent and H2 production amount display strong dependence on the light absorption range of Cdots.The blue-emissive Cdots endow the weak H2 production rate due to its weak absorption in the visible light.The enhanced photocatalytic activities are mainly contributed to the strong light absorbance and high-efficient charge separation.The light absorption of green-and red-emissive Cdots is another main factor for the high catalytic activities besides charge separation.展开更多
TiO2-seashell composites prepared via a sol-gel method were used to generate carbonate radicals(·CO3–) under solar light irradiation. ·CO3–, a selective radical, was employed to degrade the target tetracyc...TiO2-seashell composites prepared via a sol-gel method were used to generate carbonate radicals(·CO3–) under solar light irradiation. ·CO3–, a selective radical, was employed to degrade the target tetracycline hydrochloride contaminant. A series of characterizations was carried out to study the structure and composition of the synthesized TiO2-seashell composite. This material exhibits excellent solar light-driven photochemical activity in the decomposition of tetracycline hydrochloride. The possible pathway and mechanism for the photodegradation process were proposed on the basis of high-resolution electrospray ionization time-of-flight mass spectrometry experiments. Finally, we investigated the reusability of the TiO2-seashell composite. This study is expected to provide a new facile pathway for the application of ·CO3– radicals to degrade special organic pollutants in water.展开更多
The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X...The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.展开更多
A carbon‐doped TiO2/fly ash support(C‐TiO2/FAS)composite photocatalyst was successfully synthesized through sol impregnation and subsequent carbonization.The carbon dopants were derived from the organic species gene...A carbon‐doped TiO2/fly ash support(C‐TiO2/FAS)composite photocatalyst was successfully synthesized through sol impregnation and subsequent carbonization.The carbon dopants were derived from the organic species generated during the synthesis of the C‐TiO2/FAS composite.A series of analytical techniques,such as scanning electron microscopy(SEM),attenuated total reflection‐Fourier transform infrared(ATR‐FTIR)spectroscopy,X‐ray photoelectron spectroscopy(XPS),and ultraviolet‐visible diffuse reflectance spectroscopy(UV‐Vis DRS),were used to characterize the properties of the prepared samples.The results indicated that C‐TiO2 was successfully coated on the FAS surface.Coupling between C‐TiO2 and FAS resulted in the formation of Si–O–C and Al–O–Ti bonds at their interface.The formation of Si–O–C and Al–O–Ti bonds gave rise to a positive shift of the valence band edge of C‐TiO2 and enhanced its oxidation capability of photogenerated holes as well as photodegradation efficiency of methyl orange.Moreover,the C‐TiO2/FAS photocatalyst exhibited favorable reusability and separability.This work may provide a new route for tuning the electronic band structure of TiO2.展开更多
Developing innovative resource utilization strategies to achieve sustainable recycling of waste-tofuel is highly desirable,yet the design of cost-effective bifunctional catalysts with dual high-efficiency remains unex...Developing innovative resource utilization strategies to achieve sustainable recycling of waste-tofuel is highly desirable,yet the design of cost-effective bifunctional catalysts with dual high-efficiency remains unexplored.While the Fenton-like reaction relies on enhancing peroxymonosulfate(PMS)adsorption and accelerating interfacial electron transfer to improve kinetic rates,CO_(2)reduction is constrained by sluggish kinetics and competing hydrogen evolution reaction.Herein,we construct a bifunctional catalyst(NiFe-BNC)featuring dual-atomic active sites by introducing boron atoms into a biomass-derived chitosan substrate rich in functional groups,which optimizes atomic coordination environments.In situ experiments and density functional theory calculations reveal that B-atom modulation facilitates carbon substrate defect enrichment,while the charge-tuning effect between metal sites and"boron electron bridge"optimizes PMS adsorption configurations.This synergistic effect facilitates the interfacial electron transfer and enhances the CO_(2)adsorption capacity of NiFe-BNC by 6 times that of NiFe-NC.The obtained NiFe-BNC exhibits significantly enhanced catalytic activity and selectivity,realizing 99%efficient degradation of volatile organic pollutants in the flowing phase within 2 h and stable mineralization exceeding 60%,while achieving a large current density of 1000 mA cm^(-2) and CO Faraday efficiency of 98%in the flow electrolytic cell.This work innovatively paves a new way for the rational design of cost-effective functional catalysts to achieve carbon cycle utilization.展开更多
Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eet...Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eets with stable structure serve as the backbones, and carbon coating and few-layer MoS2 tightly adhere onto the surface of the TiO2. It needs to be pointed out that the carbon coating improves the overall electronic conductivity and the few-layer MoS2 facilitates the diffusion of lithium ions and offers more active sites for lithium-ion storage. As a result, when evaluated as lithium-ion battery anodes, the MoS2-C@TiO2 nanocomposites exhibit markedly enhanced lithium storage capability compared with pure TiO2. A high specific capacity of 180 mA.h.g-1 has been achieved during the preliminary cycles, and the specific capacity can maintain 160 mA.h.g-1 at a high current density of 1C （1C=167 mA.g-1） even after 300 discharge/ charge cycles, indicating the great potential of the MoS2- C@TiO2 on energy storage.展开更多
The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hyd...The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.展开更多
Series of heterogeneous interfacial engineered TiO2(C-TiO2) with controllable carbon content were facilely synthesized by incipient-wet impregnation using glucose and subsequent thermal carbonization. The obtained C-T...Series of heterogeneous interfacial engineered TiO2(C-TiO2) with controllable carbon content were facilely synthesized by incipient-wet impregnation using glucose and subsequent thermal carbonization. The obtained C-TiO2 were used as catalytic supports to load Pd nanoparticles for H2 O2 direct synthesis from H2 and O2. The as-prepared samples were systematically studied by transmission electron microscopy(TEM), X-ray photoelectron spectroscopy(XPS), air isothermal microcalorimeter, temperature-programmed reduction of H2(H2-TPR), and so on. The catalytic results showed that H2 O2 productivity and H2O2 selectivity of Pd/C-TiO2 firstly rose with increasing carbon content and then declined. Pd/C-TiO2 catalyst with 1.89 wt% of carbon content showed the best catalytic performance that had 61.2% of selectivity and 2192 mmol H2O2/g Pd/h of productivity, which were significantly better than those of pristine Pd/TiO2(45.2% and 1827 mmol H2O2/g Pd/h). Various characterization results displayed that the carbon species were heterogeneously dispersed on TiO2 surface. Moreover, no obvious geometric transformation in supports and Pd nanoparticles were observed among different catalysts. The superficial hydrophobicity of Pd/C-TiO2 was gradually promoted with increasing carbon content, which led to the corresponding decrease in adsorption energy of H2O2 with catalysts. According to structure-performance relationship analyses, the heterogeneous interfacial engineering of carbon could maintain the interaction of Pd nanoparticles with TiO2 and simultaneously accelerate the H2O2 desorption. Both factors further determined the excellent H2O2 direct synthesis performance of Pd/C-TiO2.展开更多
Great efforts have been devoted to improve the photocatalytic activity of TiO2 in the visible light region. Rational design of the external structure and adjustment of intrinsic electronic status by impurity doping ar...Great efforts have been devoted to improve the photocatalytic activity of TiO2 in the visible light region. Rational design of the external structure and adjustment of intrinsic electronic status by impurity doping are two main effective ways to achieve this purpose. A facile onepot synthetic approach was developed to prepare C-doped hollow TiO2 spheres, which simultaneously realized these advantages. The synthesized TiO2 exhibits a mesoporous hollow spherical structure composed of fine nanocrystals, leading to high specific surface area（~180 m^2/g） and versatile porous texture. Carbonate-doping was achieved by a postthermal treatment at a relatively low temperature（200°C）, which makes the absorption edge red-shifted to the visible region of the solar spectrum. Concomitantly, Ti^（3＋） induced by C-doping also functions in improving the visible-light photocatalytic activity by reducing the band gap. There exists a synergistic effect from multiple stimulatives to enhance the photocatalytic effect of the prepared TiO2 catalyst. It is not out of expectation that the asprepared C-doped hollow TiO2 spheres exhibits an improved photocatalytic activity under visible light irradiation in organic pollutant degradation.展开更多
Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemi...Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO_(2)@N-doped carbon nanotubes(TiO_(2)@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO_(2)@NC-NTs with tiny nanocrystals of anatase TiO_(2) wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m^(2) g^(-1) and a large pore size of~5 nm.The TiO_(2)@NC-NTs delivered high reversible capacities of 158 m A h g^(-1) at 2 C(1 C=335 m A g^(-1))for 2200 cycles and 146 m A h g^(-1) at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^(-1).Even at a high current density of 10 C,a capacity of 138 m A h g^(-1) could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO_(2)@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.展开更多
TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be ...TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be effectively suppressed by added polyethylene glycol （PEG） as a surface modifier. The average particle diameter of TiO2, specific surface area and absorbability of catalyst can be modified. Based on characteristics of the TiO2 photocatalyst with XRD, specific surface area, adsorption valves of methylene blue and the amount of TiO2 supported on the activated carbon, the photocatalytic degradation of L-acid was studied. The effect of the factors, such as pH of the solution, the initial concentration of L-acid on the photocatalytic degradation of L-acid, were studied also. It was found that when the pH of the solution is 1.95, the amount of photocatalyst is 0.5 g, the concentration of the L-acid solution is 1.34×10^3 mol/L and the illumination time is 7 h, the photocatalytic degradation efficiency of L-acid can reach 89,88%, The catalyst was reused 6 times and its degradation efficiency hardly changed.展开更多
It has been demonstrated that the conductivity and electrochemical properties of TiO2 nanomate rials can be significantly improved by an incorporation of carbon additives.In the study,we develop a novel Ndoped TiO2 me...It has been demonstrated that the conductivity and electrochemical properties of TiO2 nanomate rials can be significantly improved by an incorporation of carbon additives.In the study,we develop a novel Ndoped TiO2 mesoporous nanostructure via the addition of carbon quantum dots(CQDs)solution following a scalable hydrothermal process.The as-made TiO2 product shows well-defined morphology,high conductivity,large surface area,and abundant mesopores.When evaluated as anodes for sodiumion batteries,the CQDs@TiO2 product annealed at 500℃exhibits a superior sodium storage capability.It delivers a high reversible capacity of 168.8 mAh/g at 100 mA/g over 500 cycles and long cycling stability.The remarkable performance of CQDs@TiO2 mainly arises from the large surface area and mesoporous architecture constructed by ultrathin TiO2 nanosheets,as well as the full coope ration between CQDs and TiO2.展开更多
The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modificatio...The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modification can decrease the band gap of TiO2,leading to red shift toward visible light region.Interestingly,N-TiO2/ACF exhibits strongly synergistic effect owing to high surface area,good crystallinity,enhanced bandgap structure and light harvesting.The toluene removal rate of N-TiO2/ACF composites is 2.29 times higher than that of TiO2.The N-TiO2/ACF for toluene degradation followed the Langmuir-Hinshelwood kinetic model,and the rate constant is enhanced 8 times compared with TiO2.The possible photodegradation pathway and mechanisms are proposed.展开更多
Carbon nanotube film(CNTF)can be used for photocatalysis and water treatment due to its porous structure,good stability and excellent electrical properties.In this work,TiO_(2)/amorphous carbon/carbon nanotube film(TC...Carbon nanotube film(CNTF)can be used for photocatalysis and water treatment due to its porous structure,good stability and excellent electrical properties.In this work,TiO_(2)/amorphous carbon/carbon nanotube film(TCC)composite with uniform structure was prepared by a simple atomization spraying method.Rhodamine B(RhB)was used to test the photocatalytic activity of TCC.TCC composite exhibits good photocatalytic activity under ultraviolet light.In particular,the degradation efficiency of rhodamine B(RhB)by TCC sprayed with 9 layers of TiO_(2)(9 TCC)increased by 1.45 times than of TiO_(2) under ultraviolet light.The enhanced photocatalytic activity of TCC is attributed to the CNTF,which can broaden the light response range of TCC and improve the migration efficiency of electrons.The existence of amorphous carbon will promote these advances.Moreover,the better hydrophilic properties would enhance the catalytic performance happened on the solid-liquid interface.Finally,the photocatalytic mechanism and degradation intermediates of the TCC composite were proposed.展开更多
TiO2 nanoparticles were homogeneously coated on multi-walled carbon nanotubes by hydrothermal deposition, this nanocomposite may be a promising material for myoglobin immobilization in view of its high biocompatibilit...TiO2 nanoparticles were homogeneously coated on multi-walled carbon nanotubes by hydrothermal deposition, this nanocomposite may be a promising material for myoglobin immobilization in view of its high biocompatibility and large surface. The glassy carbon electrode modified with Mb-TiO2/MWCNTs films exhibited a pair of weU defined, stable and nearly reversible cycle voltammetric peaks. The electron transfer between Mb and electrode surface, Ks of 3.08 s^-1, was greatly facilitated in the TiO2/ MWCNTs film. The electrocatalytic reductions of hydrogen peroxide were studied, the apparent Michaelis-Menten constant is calculated to be 83.10 μmol/L, which shows a large catalytic activity of Mb in the TiO2/MWCNTs film to H2O2.展开更多
The Photocatalytic characterization of TiO2 supported on active carbon was investigated for photocatalytic decomposition of dichloroacetic acid. It was found that TiO2 / AC exhibited a higher photocatalytic activity t...The Photocatalytic characterization of TiO2 supported on active carbon was investigated for photocatalytic decomposition of dichloroacetic acid. It was found that TiO2 / AC exhibited a higher photocatalytic activity than pure TiO2. The reason is that active carbon acting as powerful adsorbent supports makes high concentration environments of organic pollutant molecules around TiO2 particles.展开更多
基金Projects (50908096, 50908097) supported by the National Natural Science Foundation of ChinaProject (20100471251) supported by China Postdoctoral Science Foundation
文摘In order to develop the high photocatalytic activity of TiO2 under visible light as that under ultraviolet light and make it easy to be separated from treated liquor, a visible light response and spherical activated carbon （SAC） supported photocatalyst doped with upconversion luminescence agent Er3＋：YAlO3 was prepared by immobilizing Er3＋：YAlO3/TiO2, which was obtained by combination of Er3＋：YAlO3 and TiO2 using sol-gel method, on the surface of SAC. The crystal phase composition, surface structure and element distribution, and light absorption of the new photocatalysts were examined by X-ray diffraction （XRD）, energy dispersive X-ray spectra （EDS） analysis, scanning electron microscopy （SEM） and fluorescence spectra analysis （FSA）. The photocatalytic oxidation activity of the photocatalysts was also evaluated by the photodegradation of methyl orange （MO） in aqueous solution under visible light irradiation from a LED lamp （λ400 nm）. The results showed that Er3＋：YAlO3 could perform as the upconversion luminescence agent which converts the visible light up to ultraviolet light. The Er3＋：YAlO3/TiO2 calcinated at 700 °C revealed the highest photocatalytic activity. The apparent reaction rate constant could reach 0.0197 min-1 under visible light irradiation.
基金Project(50802034) supported by the National Natural Science Foundation of ChinaProject(11A093) supported by the Key Project Foundation by the Education Department of Hunan Province,China
文摘TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.
基金Projects(51072107,51272213,51221001)supported by the National Natural Science Foundation of ChinaProject(B08040)supported by the Program of Introducing Talents of Discipline to Universities of China("111" Project)
文摘To improve the oxidation resistance of boron-modified carbon foams, the B2O3 coating was prepared on boron-modified carbon foams by low-cost slurry method. The microstructures and phase compositions of the coated carbon foams were characterized by scanning electron microscopy and X-ray diffraction, respectively. Oxidation resistances of uncoated and coated boron-modified carbon foams were investigated at 873 K in air. The results showed that as-received B2O3 coating could protect boron-modified carbon foams from oxidation at 873 K. B2O3-coated carbon foam doped with 7% B2O3 （mass fraction） （BO-7） had better oxidation resistance, exhibiting mass loss of 17.40% after oxidation at 873 K for 120 min. The melting glass layer formed on the surface of BO-7 could prevent oxygen from diffusing into boron-modified carbon foams substrate during oxidation to some extent.
基金financially supported by the Beijing Municipal High Level Innovative Team Building Program (No. IDHT20180504)the National Natural Science Foundation of China (Nos. 21805004, 21671011, 21872001 and 51801006)+3 种基金Beijing Natural Science Foundation (No. KZ201710005002 and 2192005)the Natural Science Foundation of the Beijing Municipal Education Committee, China Postdoctoral Science Foundation (No. 2018M641133)Beijing Postdoctoral Research Foundation (No. 2018-ZZ-021)Chaoyang District Postdoctoral Research Foundation (No. 2018-ZZ-026)
文摘Carbon dots(Cdots)with a broad light absorption range could be a potential stable sensitizer for TiO2,which is an excellent ultraviolet(UV)response photocatalyst.Herein,we systematically investigated the different color emissive Cdots-sensitized TiO2 for H2 production.Firstly,all kinds of Cdots enhanced the photocatalytic properties of TiO2.All the Cdots-sensitized TiO2 exhibits visible light H2 production due to their absorption in the visible light region.The photocurrent and H2 production amount display strong dependence on the light absorption range of Cdots.The blue-emissive Cdots endow the weak H2 production rate due to its weak absorption in the visible light.The enhanced photocatalytic activities are mainly contributed to the strong light absorbance and high-efficient charge separation.The light absorption of green-and red-emissive Cdots is another main factor for the high catalytic activities besides charge separation.
文摘TiO2-seashell composites prepared via a sol-gel method were used to generate carbonate radicals(·CO3–) under solar light irradiation. ·CO3–, a selective radical, was employed to degrade the target tetracycline hydrochloride contaminant. A series of characterizations was carried out to study the structure and composition of the synthesized TiO2-seashell composite. This material exhibits excellent solar light-driven photochemical activity in the decomposition of tetracycline hydrochloride. The possible pathway and mechanism for the photodegradation process were proposed on the basis of high-resolution electrospray ionization time-of-flight mass spectrometry experiments. Finally, we investigated the reusability of the TiO2-seashell composite. This study is expected to provide a new facile pathway for the application of ·CO3– radicals to degrade special organic pollutants in water.
基金supported by the National Natural Science Foundation of China (No. 20707009)the Jiangsu Province Social Development Foundation (No.BS2007051)+1 种基金the Opening Foundation (WTWER0713) of Engineering Research Center for Water Treatment and Water Remediation of the Ministry of Education of Chinathe State Key Laboratory of Pollution Control and Resource Reuse Opening Foundation (No. PCRRCF07003).
文摘The photocatalytic degradation of Rhodamine B （RhB） was carried out using TiO2 supported on activated carbon （TiO2-AC） under microwave irradiation. Composite catalyst TiO2-AC was prepared and characterized using X-ray diffraction （XRD）, transmission electron microscopy （TEM） and Brunauer-Emmett-Teller （BET）. In the process of microwave-enhanced photocatalysis （MPC）, RhB （30 mg/L） was almost completely decoloured in 10 min, and the mineralization efficiency was 96.0% in 20 min. The reaction rate constant of RhB in MPC using TiO2-AC by pseudo first-order reaction kinetics was 4.16 times of that using Degussa P25. Additionally, according to gas chromatography/mass spectrometry （GC/MS） and liquid chromatography/mass spectrometry （LC/MS） identification, the major intermediates of RhB in MPC included two kinds of N-de-ethylation intermediates （N,N-diethyl-N＇-ethyl-rhodamine （DER））, oxalic acid, malonic acid, snccinic acid, and phthalic acid, maleic acid, 3-nitrobenzoic acid, and so on. The degradation of RhB in MPC was mainly attributed to the destruction of the conjugated structure, and then the intermediates transformed to acid molecules which were mineralized to water and carbon dioxide.
文摘A carbon‐doped TiO2/fly ash support(C‐TiO2/FAS)composite photocatalyst was successfully synthesized through sol impregnation and subsequent carbonization.The carbon dopants were derived from the organic species generated during the synthesis of the C‐TiO2/FAS composite.A series of analytical techniques,such as scanning electron microscopy(SEM),attenuated total reflection‐Fourier transform infrared(ATR‐FTIR)spectroscopy,X‐ray photoelectron spectroscopy(XPS),and ultraviolet‐visible diffuse reflectance spectroscopy(UV‐Vis DRS),were used to characterize the properties of the prepared samples.The results indicated that C‐TiO2 was successfully coated on the FAS surface.Coupling between C‐TiO2 and FAS resulted in the formation of Si–O–C and Al–O–Ti bonds at their interface.The formation of Si–O–C and Al–O–Ti bonds gave rise to a positive shift of the valence band edge of C‐TiO2 and enhanced its oxidation capability of photogenerated holes as well as photodegradation efficiency of methyl orange.Moreover,the C‐TiO2/FAS photocatalyst exhibited favorable reusability and separability.This work may provide a new route for tuning the electronic band structure of TiO2.
基金supported by National Natural Science Foundation of China (Grants No. 92266107, 92366207, 52401245)the Shaanxi Fundamental Science Research Project in the fields of Mathematics and Physics (Grant No. 22JSQ008)+1 种基金the China Manned Space Station programQin Chuang Yuan Scientist and Engineer Program (2025QCY-KXJ-094)
文摘Developing innovative resource utilization strategies to achieve sustainable recycling of waste-tofuel is highly desirable,yet the design of cost-effective bifunctional catalysts with dual high-efficiency remains unexplored.While the Fenton-like reaction relies on enhancing peroxymonosulfate(PMS)adsorption and accelerating interfacial electron transfer to improve kinetic rates,CO_(2)reduction is constrained by sluggish kinetics and competing hydrogen evolution reaction.Herein,we construct a bifunctional catalyst(NiFe-BNC)featuring dual-atomic active sites by introducing boron atoms into a biomass-derived chitosan substrate rich in functional groups,which optimizes atomic coordination environments.In situ experiments and density functional theory calculations reveal that B-atom modulation facilitates carbon substrate defect enrichment,while the charge-tuning effect between metal sites and"boron electron bridge"optimizes PMS adsorption configurations.This synergistic effect facilitates the interfacial electron transfer and enhances the CO_(2)adsorption capacity of NiFe-BNC by 6 times that of NiFe-NC.The obtained NiFe-BNC exhibits significantly enhanced catalytic activity and selectivity,realizing 99%efficient degradation of volatile organic pollutants in the flowing phase within 2 h and stable mineralization exceeding 60%,while achieving a large current density of 1000 mA cm^(-2) and CO Faraday efficiency of 98%in the flow electrolytic cell.This work innovatively paves a new way for the rational design of cost-effective functional catalysts to achieve carbon cycle utilization.
基金financially supported by the National Natural Science Foundation of China(No.51472177)the China-EU Science and Technology Cooperation Project(No.SQ2013ZOA100006)
文摘Carbon and few-layer MoS2 nanosheets co- modified TiO2 nanocomposites （defined as MoS2-C@TiO2） were prepared through a facile one-step pyrolysis reaction technique. In this unique nanostructure, the TiO2 nanosh- eets with stable structure serve as the backbones, and carbon coating and few-layer MoS2 tightly adhere onto the surface of the TiO2. It needs to be pointed out that the carbon coating improves the overall electronic conductivity and the few-layer MoS2 facilitates the diffusion of lithium ions and offers more active sites for lithium-ion storage. As a result, when evaluated as lithium-ion battery anodes, the MoS2-C@TiO2 nanocomposites exhibit markedly enhanced lithium storage capability compared with pure TiO2. A high specific capacity of 180 mA.h.g-1 has been achieved during the preliminary cycles, and the specific capacity can maintain 160 mA.h.g-1 at a high current density of 1C （1C=167 mA.g-1） even after 300 discharge/ charge cycles, indicating the great potential of the MoS2- C@TiO2 on energy storage.
文摘The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.
基金supported by the National Natural Science Foundation of China(21878143,21476106,21838004)Joint Re-search Fund for Overseas Chinese Scholars and Scholars in Hong Kong and Macao Young Scholars(21729601)+1 种基金the fund of State Key Laboratory of Materials-Oriented Chemical Engineering(ZK201702)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)~~
文摘Series of heterogeneous interfacial engineered TiO2(C-TiO2) with controllable carbon content were facilely synthesized by incipient-wet impregnation using glucose and subsequent thermal carbonization. The obtained C-TiO2 were used as catalytic supports to load Pd nanoparticles for H2 O2 direct synthesis from H2 and O2. The as-prepared samples were systematically studied by transmission electron microscopy(TEM), X-ray photoelectron spectroscopy(XPS), air isothermal microcalorimeter, temperature-programmed reduction of H2(H2-TPR), and so on. The catalytic results showed that H2 O2 productivity and H2O2 selectivity of Pd/C-TiO2 firstly rose with increasing carbon content and then declined. Pd/C-TiO2 catalyst with 1.89 wt% of carbon content showed the best catalytic performance that had 61.2% of selectivity and 2192 mmol H2O2/g Pd/h of productivity, which were significantly better than those of pristine Pd/TiO2(45.2% and 1827 mmol H2O2/g Pd/h). Various characterization results displayed that the carbon species were heterogeneously dispersed on TiO2 surface. Moreover, no obvious geometric transformation in supports and Pd nanoparticles were observed among different catalysts. The superficial hydrophobicity of Pd/C-TiO2 was gradually promoted with increasing carbon content, which led to the corresponding decrease in adsorption energy of H2O2 with catalysts. According to structure-performance relationship analyses, the heterogeneous interfacial engineering of carbon could maintain the interaction of Pd nanoparticles with TiO2 and simultaneously accelerate the H2O2 desorption. Both factors further determined the excellent H2O2 direct synthesis performance of Pd/C-TiO2.
基金supported by the National Natural Science Foundation of China(Nos.21677159,21522706,21677167)the National Basic Research Program of China(2011CB936001)the Thousand Young Talents Program of China
文摘Great efforts have been devoted to improve the photocatalytic activity of TiO2 in the visible light region. Rational design of the external structure and adjustment of intrinsic electronic status by impurity doping are two main effective ways to achieve this purpose. A facile onepot synthetic approach was developed to prepare C-doped hollow TiO2 spheres, which simultaneously realized these advantages. The synthesized TiO2 exhibits a mesoporous hollow spherical structure composed of fine nanocrystals, leading to high specific surface area（~180 m^2/g） and versatile porous texture. Carbonate-doping was achieved by a postthermal treatment at a relatively low temperature（200°C）, which makes the absorption edge red-shifted to the visible region of the solar spectrum. Concomitantly, Ti^（3＋） induced by C-doping also functions in improving the visible-light photocatalytic activity by reducing the band gap. There exists a synergistic effect from multiple stimulatives to enhance the photocatalytic effect of the prepared TiO2 catalyst. It is not out of expectation that the asprepared C-doped hollow TiO2 spheres exhibits an improved photocatalytic activity under visible light irradiation in organic pollutant degradation.
基金the financial support provided by internal reseach funding of Khalifa University of Science and Technology,United Arab Emirates(Grant No.CIRA-2018-16)。
文摘Controllable synthesis of insertion-type anode materials with beneficial micro-and nanostructures is a promising approach for the synthesis of sodium-ion storage devices with high-reactivity and excellent electrochemical performance.In this study,we developed a sacrificial-templating route to synthesize TiO_(2)@N-doped carbon nanotubes(TiO_(2)@NC-NTs)with excellent electrochemical performance.The asprepared mesoporous TiO_(2)@NC-NTs with tiny nanocrystals of anatase TiO_(2) wrapped in N-doped carbon layers showed a well-defined tube structure with a large specific surface area of 198 m^(2) g^(-1) and a large pore size of~5 nm.The TiO_(2)@NC-NTs delivered high reversible capacities of 158 m A h g^(-1) at 2 C(1 C=335 m A g^(-1))for 2200 cycles and 146 m A h g^(-1) at 5 C for 4000 cycles,as well as an ultrahigh rate capability of up to 40 C with a capacity of 98 m A h g^(-1).Even at a high current density of 10 C,a capacity of 138 m A h g^(-1) could be delivered over 10,000 cycles.Thus,the synthesis of mesoporous TiO_(2)@NC-NTs was demonstrated to be an efficient approach for developing electrode materials with high sodium storage and long cycle life.
基金The State Education Ministry "211" Project, the Natural Science Foundation of the Education Commission of Jiangsu Province(2005103TSJB156) and the Funding of the Environment Friendship Laboratory of Nanjing Normal University
文摘TiO2 sol was prepared by sol-gel technique with tetrabutyl titanate as precursor. Supported TiO2 catalysts on activated carbon were prepared by soak and sintering method. The aggregation of nano-TiO2 particles can be effectively suppressed by added polyethylene glycol （PEG） as a surface modifier. The average particle diameter of TiO2, specific surface area and absorbability of catalyst can be modified. Based on characteristics of the TiO2 photocatalyst with XRD, specific surface area, adsorption valves of methylene blue and the amount of TiO2 supported on the activated carbon, the photocatalytic degradation of L-acid was studied. The effect of the factors, such as pH of the solution, the initial concentration of L-acid on the photocatalytic degradation of L-acid, were studied also. It was found that when the pH of the solution is 1.95, the amount of photocatalyst is 0.5 g, the concentration of the L-acid solution is 1.34×10^3 mol/L and the illumination time is 7 h, the photocatalytic degradation efficiency of L-acid can reach 89,88%, The catalyst was reused 6 times and its degradation efficiency hardly changed.
基金financial support from the Shuguang Program supported by Shanghai Education Development Foundation and Shanghai Municipal Education Commission(No.18SG035)Shanghai Pujiang Program(No.17PJD015)。
文摘It has been demonstrated that the conductivity and electrochemical properties of TiO2 nanomate rials can be significantly improved by an incorporation of carbon additives.In the study,we develop a novel Ndoped TiO2 mesoporous nanostructure via the addition of carbon quantum dots(CQDs)solution following a scalable hydrothermal process.The as-made TiO2 product shows well-defined morphology,high conductivity,large surface area,and abundant mesopores.When evaluated as anodes for sodiumion batteries,the CQDs@TiO2 product annealed at 500℃exhibits a superior sodium storage capability.It delivers a high reversible capacity of 168.8 mAh/g at 100 mA/g over 500 cycles and long cycling stability.The remarkable performance of CQDs@TiO2 mainly arises from the large surface area and mesoporous architecture constructed by ultrathin TiO2 nanosheets,as well as the full coope ration between CQDs and TiO2.
基金This study was supported by the CNPC Research Institute of Safety and Environmental Protection Technology(No.PPCIP2017005).
文摘The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modification can decrease the band gap of TiO2,leading to red shift toward visible light region.Interestingly,N-TiO2/ACF exhibits strongly synergistic effect owing to high surface area,good crystallinity,enhanced bandgap structure and light harvesting.The toluene removal rate of N-TiO2/ACF composites is 2.29 times higher than that of TiO2.The N-TiO2/ACF for toluene degradation followed the Langmuir-Hinshelwood kinetic model,and the rate constant is enhanced 8 times compared with TiO2.The possible photodegradation pathway and mechanisms are proposed.
基金supported by the National Natural Science Foundation of China(Nos.21872102 and 21906001)。
文摘Carbon nanotube film(CNTF)can be used for photocatalysis and water treatment due to its porous structure,good stability and excellent electrical properties.In this work,TiO_(2)/amorphous carbon/carbon nanotube film(TCC)composite with uniform structure was prepared by a simple atomization spraying method.Rhodamine B(RhB)was used to test the photocatalytic activity of TCC.TCC composite exhibits good photocatalytic activity under ultraviolet light.In particular,the degradation efficiency of rhodamine B(RhB)by TCC sprayed with 9 layers of TiO_(2)(9 TCC)increased by 1.45 times than of TiO_(2) under ultraviolet light.The enhanced photocatalytic activity of TCC is attributed to the CNTF,which can broaden the light response range of TCC and improve the migration efficiency of electrons.The existence of amorphous carbon will promote these advances.Moreover,the better hydrophilic properties would enhance the catalytic performance happened on the solid-liquid interface.Finally,the photocatalytic mechanism and degradation intermediates of the TCC composite were proposed.
基金the National Natural Science Foundation of China(No.20635020,90606016)
文摘TiO2 nanoparticles were homogeneously coated on multi-walled carbon nanotubes by hydrothermal deposition, this nanocomposite may be a promising material for myoglobin immobilization in view of its high biocompatibility and large surface. The glassy carbon electrode modified with Mb-TiO2/MWCNTs films exhibited a pair of weU defined, stable and nearly reversible cycle voltammetric peaks. The electron transfer between Mb and electrode surface, Ks of 3.08 s^-1, was greatly facilitated in the TiO2/ MWCNTs film. The electrocatalytic reductions of hydrogen peroxide were studied, the apparent Michaelis-Menten constant is calculated to be 83.10 μmol/L, which shows a large catalytic activity of Mb in the TiO2/MWCNTs film to H2O2.
基金the National Natural Science Foundation of China (No.29877025).
文摘The Photocatalytic characterization of TiO2 supported on active carbon was investigated for photocatalytic decomposition of dichloroacetic acid. It was found that TiO2 / AC exhibited a higher photocatalytic activity than pure TiO2. The reason is that active carbon acting as powerful adsorbent supports makes high concentration environments of organic pollutant molecules around TiO2 particles.
