Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based...Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based BMGs,restricting their commercial applications significantly.In this study,this challenge was addressed by introducing a two-step alloying strategy to mitigate the remarkable density increment effect associated with heavy alloying elements required for enhancing the GFA.Consequently,through two-step alloying with Al and Fe in sequence,simultaneous enhancements in specific strength and GFA were achieved based on a Ti-Zr-Be ternary metallic glass,resulting in the development of a series of centimeter-sized metallic glasses exhibiting ultrahigh-specific strength.Notably,the newly developed(Ti_(45)Zr_(20)Be_(31)A_(l4))_(94)Fe_(6)alloy established a new record for the specific strength of Ti-based BMGs.Along with a critical diameter(D_(c))of 10 mm,it offers the optimal scheme for balancing the specific strength and GFA of Ti-based BMGs.The present results further brighten the application prospects of Ti-based BMGs as lightweight materials.展开更多
An efficient and safe hydrogen storage method is one of the important links for the large-scale development of hydrogen in the future. Because of its low price and simple design, Ti-based hydrogen storage alloys are c...An efficient and safe hydrogen storage method is one of the important links for the large-scale development of hydrogen in the future. Because of its low price and simple design, Ti-based hydrogen storage alloys are considered to be suitable for practical applications. In this paper, we review the latest research on Ti-based hydrogen storage alloys. Firstly, the machine learning and density functional theory are introduced to provide theoretical guidance for the optimization of Ti-based hydrogen storage alloys. Then, in order to improve the hydrogen storage performance, we briefly introduce the research of AB type and AB2 type Ti-based alloys, focusing on doping elements and adaptive after treatment. Finally, suggestions for the future research and development of Ti-based hydrogen storage alloys are proposed. .展开更多
Ti-based alloys have been widely applied in the aerospace field,owing to their outstanding performance.Precision casting can be used to make integrated near-net-shape components with complex thin-walled structures,whi...Ti-based alloys have been widely applied in the aerospace field,owing to their outstanding performance.Precision casting can be used to make integrated near-net-shape components with complex thin-walled structures,which will further promote the engineering application of Ti-based alloys. In this paper,the research progress of Tibased alloys,e. g.,high-temperature Ti-based alloys,high-strength Ti-based alloys,TiAl-based alloys,Ti-based matrix composites,and their precision casting technologies are reviewed. In addition,the development directions of Tibased alloys are presented based on the application status of Ti-based alloys in the aerospace field.展开更多
Mg2FeH6 doped with and without Ti and its alloys (TiMn2, TiAl) were prepared combing ball milling and heat treatment. The effects of these additives on the dehydrogenation performance of Mg2FeH6 were studied systemati...Mg2FeH6 doped with and without Ti and its alloys (TiMn2, TiAl) were prepared combing ball milling and heat treatment. The effects of these additives on the dehydrogenation performance of Mg2FeH6 were studied systematically. The results show that all additives have favor influence on improving the hydrogen desorption property of Mg2FeH6. Especially, TiMn2 exhibits prominent effect on enhancing the dehydrogenation kinetics of Mg2FeH6. Moreover, the activation energy of TiMn2-doped Mg2FeH6 calculated by Kissinger equation is 94.87 kJ/mol, which is 28 kJ/mol lower than that of the undoped Mg2FeH6. The cycling tests suggest that the improved dehydrogenation kinetics of Mg2FeH6 doped by TiMn2 can maintain in the second cycle.展开更多
Ti47Cu38-xZr7.5Fe2.5Sn2Si1Ag2Nbx（x = 0, 1, 2; at%） bulk metallic glasses （BMGs） with superior biocorrosion resistance were synthesized by copper mold casting. Although the minor addition of Nb to the Ti-Cu- Zr-Fe-...Ti47Cu38-xZr7.5Fe2.5Sn2Si1Ag2Nbx（x = 0, 1, 2; at%） bulk metallic glasses （BMGs） with superior biocorrosion resistance were synthesized by copper mold casting. Although the minor addition of Nb to the Ti-Cu- Zr-Fe-Sn-Si-Ag BMG slightly decreases the glass-forming ability （GFA）, the Nb-bearing Ti-based alloys could be casted in a bulk glassy rod form with diameters up to 3 mm. It is found that partial substitution of Cu with Nb is effective on enhancing the bio-corrosion resistance of the Ti-based BMG. Potentiodynamic polarization measurements show that Nb addition to Ti-based BMG leads to higher open-circuit potential and pitting potential as well as lower passive current density in Hank＇s solution. Electrochemical impedance spectroscopy （EIS） results indicate that with Nb content increasing, the charge transfer resistance values of the Ti-based BMGs become larger, demonstrating that the surface oxide films are more protective. The Nb-bearing Ti-based BMGs also exhibit good in vitro biocompatibility comparable to that of Ti-6Al-4V alloy. The enhanced bio-corrosion resistance, excellent in vitro biocompatibility and good mechanical properties of the Nb-bearing Ti-based BMGs are favorable for biomedical applications.展开更多
The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilize...The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilized yttrium.Using Rietveld refinement,it was found that the obtained fcc phase has crystallite size smaller than 10 nm and microstrain larger than 10-3.Both conditions are required to form an fcc phase in Ti-based alloys.For all samples,the microstructure of the fcc phase consists of equiaxial crystallites with sizes smaller than 10 nm.The largest presence of fcc phase in the studied Ti alloy was found with 6 at.%Sn,because this alloy exhibits the largest microstrain(1.5×10-2)and crystallite size of 6.5 nm.Experimental data reveal that a solid solution and an amorphous phase were formed during milling.The necessary conditions to promote the formation of solid solution and amorphous phases were determined using thermodynamic calculations.When the amount of Sn increases,the energy required to form an amorphous phase varies from approximately 10 to approximately-5 k J/mol for 3 and 12 at.%Sn,respectively.The thermodynamic calculations are in agreement with XRD patterns analysis and HRTEM results.展开更多
A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstr...A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstructure and the performance of the composite anode were studied by scanning electron microscopy(SEM),mechanical properties tests at room temperature and electrochemical methods.The results show that the thickness of the diffusion layer increases with the increase of sintering temperature up to 1 100 °C;whereas,the surface Mn content increases and reaches the maximum at 1 000 °C and then decreases thereafter.Lower surface Mn content is beneficial for the enhanced corrosion resistance and lowered open cell voltage in electrolytic process.The new anode prepared under the optimized conditions has been applied in industry and exhibits superior economic benefits to conventional Ti anodic materials.展开更多
Industrial exploitation of the high specific strength and corrosion resistance of titanium were dominated historically by the technological advances which have been made in gas-turbine engine and aircraft components. ...Industrial exploitation of the high specific strength and corrosion resistance of titanium were dominated historically by the technological advances which have been made in gas-turbine engine and aircraft components. Realization of the possible benefits in general engineering has been limited by the absence of any proven and reliable means of overcoming the poor wear resistance and galling tendency suffered by titanium alloys when in contact with other materials. This problem can only be addressed by optimizing and demonstrating industrially viable surface engineering processes for titanium in general engineering. The status of single and duplex surface engineering systems are reviewed. In addition, in order to fully realize the potential of advanced surface engineering of titanium components contact mechanics models are developed to enable the automotive engineers to design dynamically the loaded automotive engine and transmission components.展开更多
Ti-based AB2-type hydrogen storage alloys are a group of promising materials, which will probably replace the prevalent rare earth-based AB5-type alloys and be adopted as the main cathode materials of nickel-metal hyd...Ti-based AB2-type hydrogen storage alloys are a group of promising materials, which will probably replace the prevalent rare earth-based AB5-type alloys and be adopted as the main cathode materials of nickel-metal hydride （Ni-MH） batteries in the near future. Alloying in side B is a major way to improve the performance of Ti-based AB2-type alloys. Based on recent studies, the effects of alloying elements in side B upon the performance of Ti-based AB2-type hydrogen storage alloys are systematically reviewed here. These performances are divided into two categories, namely PCI characteristics, including hydrogen storage capacity （HSC）, plateau pressure （PP）, pressure hysteresis （PH） and pressure plateau sloping （PPS）, and electrochemical properties, including discharge capacity （DC）, activation property （AP）, cycling stability （CS） and high-rate dischargeability （HRD）. Furthermore, the existing problems in these investigations and some suggestions for future research are proposed.展开更多
Ti-based hydrogen storage alloy is one of the most common solid-state hydrogen storage materials due to its high hydrogen absorption capacity, low dehydrogenation temperature and rich resources. This paper mainly pres...Ti-based hydrogen storage alloy is one of the most common solid-state hydrogen storage materials due to its high hydrogen absorption capacity, low dehydrogenation temperature and rich resources. This paper mainly presents the influence of several different preparation methods of Ti-based hydrogen storage alloys on the hydrogen storage performance including traditional preparation methods (smelting, rapid quenching and mechanical alloying) and novel methods by plastic deformation (cold rolling, equal channel angular pressing and high-pressure torsion). The microstructure analysis and hydrogen storage properties of Ti-based alloy are summarized thoroughly corresponding with the preparation processes mentioned above. It was found that slight introduction of lattice defects including dislocation, grain boundary, sub-grain boundary and cracks by severe plastic deformation (SPD) was beneficial to improve the hydriding/dehydriding kinetic characteristic. However, the nonuniform composition and residual stress of the alloy may be caused by SPD, which is not conducive to the improvement of hydrogen storage capacity. In the future, it would be expected that new methods and technologies combined with dopant and modification are applied to Ti-based hydrogen storage alloys to make breakthroughs in practical application.展开更多
Bulk amorphous formation in Ti-Cu-based multicomponent alloys, free of Ni, Pd and Be elements, were studied using the cluster-plus-glue-atom model. The basic cluster formula was revealed as [Ti9Cu6]Cu3 to explain the ...Bulk amorphous formation in Ti-Cu-based multicomponent alloys, free of Ni, Pd and Be elements, were studied using the cluster-plus-glue-atom model. The basic cluster formula was revealed as [Ti9Cu6]Cu3 to explain the best binary glass forming composition Ti50Cu50=Ti9Cu9, where the CN14 rhombi-dodecahedron Ti9Cu6 was the principal cluster in the devitrification phase CuTi. This basic cluster formula was further alloyed with Zr and Sn and a critical glass forming ability was reached at （Ti7.2Zr1.8）（Cus.72Sn0.28） and （Ti7.2Zr1.8）（Cu8.45Sn0.55） up to 5 mm in diameter by suction casting, which was the largest in Ti-Cu- based and Ni-, Pd- and Be-free alloys.展开更多
The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high...The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.展开更多
Based on experimental data,machine learning(ML) models for Young's modulus,hardness,and hot-working ability of Ti-based alloys were constructed.In the models,the interdiffusion and mechanical property data were hi...Based on experimental data,machine learning(ML) models for Young's modulus,hardness,and hot-working ability of Ti-based alloys were constructed.In the models,the interdiffusion and mechanical property data were high-throughput re-evaluated from composition variations and nanoindentation data of diffusion couples.Then,the Ti-(22±0.5)at.%Nb-(30±0.5)at.%Zr-(4±0.5)at.%Cr(TNZC) alloy with a single body-centered cubic(BCC) phase was screened in an interactive loop.The experimental results exhibited a relatively low Young's modulus of(58±4) GPa,high nanohardness of(3.4±0.2) GPa,high microhardness of HV(520±5),high compressive yield strength of(1220±18) MPa,large plastic strain greater than 30%,and superior dry-and wet-wear resistance.This work demonstrates that ML combined with high-throughput analytic approaches can offer a powerful tool to accelerate the design of multicomponent Ti alloys with desired properties.Moreover,it is indicated that TNZC alloy is an attractive candidate for biomedical applications.展开更多
Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_...Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_(32)V_(40+x)Fe_(23-x)Mn_(5)(x=0,4,8,12,at.%)alloys were designed,and the effects of V/Fe ratio on phase constitution and hydrogen storage properties were investigated.The main phase of the alloys is body-centered cubic(BCC)phase,and the lattice constants of the BCC phase decrease with the decrease of V/Fe ratio.Moreover,C14 Laves phase exists in alloys with a Fe content of 19at.%to 23at.%.For hydrogenation,the C14 Laves phase can accelerate the hydrogen absorption rate,but the hydrogen absorption capacity is reduced.With the decrease of V/Fe ratio,the hydride gradually destabilizes.Owing to its large lattice constant and high hydrogen absorption phase content,the Ti_(32)V_(52)Fe_(11)Mn_(5)alloy shows the most enhanced hydrogen storage properties with hydrogenation and dehydrogenation capacities of 3.588wt.%at 298 K and 1.688wt.%at 343 K,respectively.The hydrogen absorption capacity of this alloy can be reserved to 3.574wt.%after 20 cycles of hydrogen absorption and desorption.展开更多
Using the modified Blonder-Tinkham-Klapwijk(BTK)theory,the interplay between the lifetime of quasi particles and the magnetic gap in a topological insulator-based ferromagnet/fwave superconductor(TI-based FM/f-wave SC...Using the modified Blonder-Tinkham-Klapwijk(BTK)theory,the interplay between the lifetime of quasi particles and the magnetic gap in a topological insulator-based ferromagnet/fwave superconductor(TI-based FM/f-wave SC)tunnel structure is theoretically studied.Two symmetries of f_(1) and f_(2) waves are considered for superconducting pairing states.The results indicate that reducing the finite quasi-particle lifetime will induce a transformation of energy-gap peaks into a zero-bias peak in tunneling conductance spectrum,as well as a transformation of energy-gap dips into a zero-bias dip in shot noise spectrum,ultimately resulting in the smoothing of the zero-bias conductance peak and the zero-bias shot noise dip.An increase in magnetic gap will suppress the tunnel conductance and shot noise when the conventional Andreev retroreflection dominates,but will enhance them when the specular Andreev reflection is dominant.Both specular Andreev reflection and conventional Andreev retro-reflection will be enhanced as the quasi-particle lifetime increases.When Fermi energy equals the magnetic gap,shot noise and tunneling conductance vanish across all energy ranges.These findings not only contribute to a better understanding of specular Andreev reflection in the FM/f-wave SC junction based on TIs but also provide insights for experimentally determining the f-wave pairing symmetry.展开更多
The effects of thermal treatments on the structure, mechanical properties, wear resistance, and in vitro corrosion protection in artificial saliva(AS) were investigated for a newly developed Ti20 Nb13 Zr(TNZ) alloy. X...The effects of thermal treatments on the structure, mechanical properties, wear resistance, and in vitro corrosion protection in artificial saliva(AS) were investigated for a newly developed Ti20 Nb13 Zr(TNZ) alloy. XRD and SEM analyses were used for structural and microstructural analysis. The in vitro corrosion properties of the samples were investigated using electrochemical impedance spectroscopy and linear polarization resistance techniques up to an immersion time of 168 h. The tribological characteristics were evaluated with a linear reciprocating tribometer. SEM analysis showed that solution treatment and aging influenced the size and distribution of α phase. The air-cooled and aged samples exhibited the highest microhardness and macrohardness, for which the wear resistances were 25% and 30% higher than that of the untreated sample, respectively. The cooling rate significantly influenced the corrosion resistance of the TNZ samples. The treated samples showed a reduced corrosion rate(50%) for long immersion time up to 168 h in AS. The furnace-cooled and aged samples exhibited the highest corrosion resistance after 168 h of immersion in AS. Among the treated samples, the aged sample showed enhanced mechanical properties, wear behavior, and in vitro corrosion resistance in AS.展开更多
Ti47Cu38-xZr7.5Fe2.5Sn2 Si1 Ag2 Tax(x=1-4;at%,the same below)bulk metallic glasses(BMGs)with good bio-corrosion resistance and mechanical properties were fabricated by copper mold casting.Critical diameter of the Ti-b...Ti47Cu38-xZr7.5Fe2.5Sn2 Si1 Ag2 Tax(x=1-4;at%,the same below)bulk metallic glasses(BMGs)with good bio-corrosion resistance and mechanical properties were fabricated by copper mold casting.Critical diameter of the Ti-based BMGs with 1 at%-4 at%Ta was 3 mm.The Ta-incorporated Ti-based BMGs exhibit higher open current potential and parallel passive current density in comparison with those of Ti-6 Al-4 V alloy in 0.9 wt%NaCl and Hank’s solution,implying their good corrosion resistance.The pitting corrosion potential of the Ti-based BMGs gradually increases up to about 1.25 V with Ta addition increasing up to 4 at%in 0.9 wt%NaCl solution.Among the present Ti-based BMGs,the alloy bearing2 at%Ta exhibits the optimal integration of mechanical properties,including the compressive fracture strength exceeding 2000 MPa,relative low Young’s modulus of98 GPa,plastic strain of 3.4%and high hardness of HV599.The Ta-bearing Ti-based bulk metallic glasses with integration of relative high GFA,good mechanical properties and high bio-corrosion resistance are beneficial for biomedical applications.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52271148 and 51871129).
文摘Ti-based bulk metallic glasses(BMGs)have attracted increasing attention due to their high specific strength.However,a fundamental conflict exists between the specific strength and glass-forming ability(GFA)of Ti-based BMGs,restricting their commercial applications significantly.In this study,this challenge was addressed by introducing a two-step alloying strategy to mitigate the remarkable density increment effect associated with heavy alloying elements required for enhancing the GFA.Consequently,through two-step alloying with Al and Fe in sequence,simultaneous enhancements in specific strength and GFA were achieved based on a Ti-Zr-Be ternary metallic glass,resulting in the development of a series of centimeter-sized metallic glasses exhibiting ultrahigh-specific strength.Notably,the newly developed(Ti_(45)Zr_(20)Be_(31)A_(l4))_(94)Fe_(6)alloy established a new record for the specific strength of Ti-based BMGs.Along with a critical diameter(D_(c))of 10 mm,it offers the optimal scheme for balancing the specific strength and GFA of Ti-based BMGs.The present results further brighten the application prospects of Ti-based BMGs as lightweight materials.
文摘An efficient and safe hydrogen storage method is one of the important links for the large-scale development of hydrogen in the future. Because of its low price and simple design, Ti-based hydrogen storage alloys are considered to be suitable for practical applications. In this paper, we review the latest research on Ti-based hydrogen storage alloys. Firstly, the machine learning and density functional theory are introduced to provide theoretical guidance for the optimization of Ti-based hydrogen storage alloys. Then, in order to improve the hydrogen storage performance, we briefly introduce the research of AB type and AB2 type Ti-based alloys, focusing on doping elements and adaptive after treatment. Finally, suggestions for the future research and development of Ti-based hydrogen storage alloys are proposed. .
文摘Ti-based alloys have been widely applied in the aerospace field,owing to their outstanding performance.Precision casting can be used to make integrated near-net-shape components with complex thin-walled structures,which will further promote the engineering application of Ti-based alloys. In this paper,the research progress of Tibased alloys,e. g.,high-temperature Ti-based alloys,high-strength Ti-based alloys,TiAl-based alloys,Ti-based matrix composites,and their precision casting technologies are reviewed. In addition,the development directions of Tibased alloys are presented based on the application status of Ti-based alloys in the aerospace field.
基金Project(2010CB631300)supported by the National Basic Research Program of ChinaProject(2012AA051503)supported by the National High Technology Research&Development Program of China+1 种基金Projects(51001090,51171173)supported by the National Natural Science Foundation of ChinaProject(IRT13037)supported by the Program for Innovative Research Team in University of Ministry of Education of China
文摘Mg2FeH6 doped with and without Ti and its alloys (TiMn2, TiAl) were prepared combing ball milling and heat treatment. The effects of these additives on the dehydrogenation performance of Mg2FeH6 were studied systematically. The results show that all additives have favor influence on improving the hydrogen desorption property of Mg2FeH6. Especially, TiMn2 exhibits prominent effect on enhancing the dehydrogenation kinetics of Mg2FeH6. Moreover, the activation energy of TiMn2-doped Mg2FeH6 calculated by Kissinger equation is 94.87 kJ/mol, which is 28 kJ/mol lower than that of the undoped Mg2FeH6. The cycling tests suggest that the improved dehydrogenation kinetics of Mg2FeH6 doped by TiMn2 can maintain in the second cycle.
基金financially supported by the National Natural Science Foundation of China (Nos.51161130526 and 51271008)
文摘Ti47Cu38-xZr7.5Fe2.5Sn2Si1Ag2Nbx（x = 0, 1, 2; at%） bulk metallic glasses （BMGs） with superior biocorrosion resistance were synthesized by copper mold casting. Although the minor addition of Nb to the Ti-Cu- Zr-Fe-Sn-Si-Ag BMG slightly decreases the glass-forming ability （GFA）, the Nb-bearing Ti-based alloys could be casted in a bulk glassy rod form with diameters up to 3 mm. It is found that partial substitution of Cu with Nb is effective on enhancing the bio-corrosion resistance of the Ti-based BMG. Potentiodynamic polarization measurements show that Nb addition to Ti-based BMG leads to higher open-circuit potential and pitting potential as well as lower passive current density in Hank＇s solution. Electrochemical impedance spectroscopy （EIS） results indicate that with Nb content increasing, the charge transfer resistance values of the Ti-based BMGs become larger, demonstrating that the surface oxide films are more protective. The Nb-bearing Ti-based BMGs also exhibit good in vitro biocompatibility comparable to that of Ti-6Al-4V alloy. The enhanced bio-corrosion resistance, excellent in vitro biocompatibility and good mechanical properties of the Nb-bearing Ti-based BMGs are favorable for biomedical applications.
基金financial support from FONDECYT Project No.1190797FONDEQUIP/EQM Project No.140095。
文摘The effect of the amount of Sn on the formation of fcc phase in Ti-13 Ta-x Sn(x=3,6,9 and 12,at.%)alloys was studied.The alloys were synthesized by mechanical alloying using a planetary mill,jar and balls of stabilized yttrium.Using Rietveld refinement,it was found that the obtained fcc phase has crystallite size smaller than 10 nm and microstrain larger than 10-3.Both conditions are required to form an fcc phase in Ti-based alloys.For all samples,the microstructure of the fcc phase consists of equiaxial crystallites with sizes smaller than 10 nm.The largest presence of fcc phase in the studied Ti alloy was found with 6 at.%Sn,because this alloy exhibits the largest microstrain(1.5×10-2)and crystallite size of 6.5 nm.Experimental data reveal that a solid solution and an amorphous phase were formed during milling.The necessary conditions to promote the formation of solid solution and amorphous phases were determined using thermodynamic calculations.When the amount of Sn increases,the energy required to form an amorphous phase varies from approximately 10 to approximately-5 k J/mol for 3 and 12 at.%Sn,respectively.The thermodynamic calculations are in agreement with XRD patterns analysis and HRTEM results.
基金Projects(20476106,50721003 and 20636020) supported by the National Natural Science Foundation of ChinaProject(50825102) supported by the National Natural Science Funds for Distinguished Young Scholar of China+1 种基金Project(2006AA03Z511) supported by the National High Technology Research and Development Program of ChinaProject supported by the 111 Program of Chinese Ministry of Education
文摘A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstructure and the performance of the composite anode were studied by scanning electron microscopy(SEM),mechanical properties tests at room temperature and electrochemical methods.The results show that the thickness of the diffusion layer increases with the increase of sintering temperature up to 1 100 °C;whereas,the surface Mn content increases and reaches the maximum at 1 000 °C and then decreases thereafter.Lower surface Mn content is beneficial for the enhanced corrosion resistance and lowered open cell voltage in electrolytic process.The new anode prepared under the optimized conditions has been applied in industry and exhibits superior economic benefits to conventional Ti anodic materials.
文摘Industrial exploitation of the high specific strength and corrosion resistance of titanium were dominated historically by the technological advances which have been made in gas-turbine engine and aircraft components. Realization of the possible benefits in general engineering has been limited by the absence of any proven and reliable means of overcoming the poor wear resistance and galling tendency suffered by titanium alloys when in contact with other materials. This problem can only be addressed by optimizing and demonstrating industrially viable surface engineering processes for titanium in general engineering. The status of single and duplex surface engineering systems are reviewed. In addition, in order to fully realize the potential of advanced surface engineering of titanium components contact mechanics models are developed to enable the automotive engineers to design dynamically the loaded automotive engine and transmission components.
文摘Ti-based AB2-type hydrogen storage alloys are a group of promising materials, which will probably replace the prevalent rare earth-based AB5-type alloys and be adopted as the main cathode materials of nickel-metal hydride （Ni-MH） batteries in the near future. Alloying in side B is a major way to improve the performance of Ti-based AB2-type alloys. Based on recent studies, the effects of alloying elements in side B upon the performance of Ti-based AB2-type hydrogen storage alloys are systematically reviewed here. These performances are divided into two categories, namely PCI characteristics, including hydrogen storage capacity （HSC）, plateau pressure （PP）, pressure hysteresis （PH） and pressure plateau sloping （PPS）, and electrochemical properties, including discharge capacity （DC）, activation property （AP）, cycling stability （CS） and high-rate dischargeability （HRD）. Furthermore, the existing problems in these investigations and some suggestions for future research are proposed.
文摘Ti-based hydrogen storage alloy is one of the most common solid-state hydrogen storage materials due to its high hydrogen absorption capacity, low dehydrogenation temperature and rich resources. This paper mainly presents the influence of several different preparation methods of Ti-based hydrogen storage alloys on the hydrogen storage performance including traditional preparation methods (smelting, rapid quenching and mechanical alloying) and novel methods by plastic deformation (cold rolling, equal channel angular pressing and high-pressure torsion). The microstructure analysis and hydrogen storage properties of Ti-based alloy are summarized thoroughly corresponding with the preparation processes mentioned above. It was found that slight introduction of lattice defects including dislocation, grain boundary, sub-grain boundary and cracks by severe plastic deformation (SPD) was beneficial to improve the hydriding/dehydriding kinetic characteristic. However, the nonuniform composition and residual stress of the alloy may be caused by SPD, which is not conducive to the improvement of hydrogen storage capacity. In the future, it would be expected that new methods and technologies combined with dopant and modification are applied to Ti-based hydrogen storage alloys to make breakthroughs in practical application.
基金supported by the National Natural Science Foundation of China(Grant Nos. 51131002 and 51171035)the Fundamental Research Funds for the Central Universities(Grant No. DUT12LAB08)
文摘Bulk amorphous formation in Ti-Cu-based multicomponent alloys, free of Ni, Pd and Be elements, were studied using the cluster-plus-glue-atom model. The basic cluster formula was revealed as [Ti9Cu6]Cu3 to explain the best binary glass forming composition Ti50Cu50=Ti9Cu9, where the CN14 rhombi-dodecahedron Ti9Cu6 was the principal cluster in the devitrification phase CuTi. This basic cluster formula was further alloyed with Zr and Sn and a critical glass forming ability was reached at （Ti7.2Zr1.8）（Cus.72Sn0.28） and （Ti7.2Zr1.8）（Cu8.45Sn0.55） up to 5 mm in diameter by suction casting, which was the largest in Ti-Cu- based and Ni-, Pd- and Be-free alloys.
基金supported by the National Natural Science Foundation of China(51902108,51762006,51964013)the Special Projects for Central Government to Guide Local Technological Development(GUIKE ZY20198008)+2 种基金the Guangxi InnovationDriven Development Subject(GUIKE AA19182020,GUIKE AA19254004)the Guangxi Technology Base and Talent Subject(GUIKE AD18126001,GUIKE AD20999012,GUIKE AD20297086)the Special Fund for Guangxi Distinguished Expert。
文摘The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.
基金the financial supports from the National Key Research and Development Program of China (No. 2022YFB3707501)the National Natural Science Foundation of China (No. 51701083)+1 种基金the GDAS Project of Science and Technology Development, China (No. 2022GDASZH2022010107)the Guangzhou Basic and Applied Basic Research Foundation, China (No. 202201010686)。
文摘Based on experimental data,machine learning(ML) models for Young's modulus,hardness,and hot-working ability of Ti-based alloys were constructed.In the models,the interdiffusion and mechanical property data were high-throughput re-evaluated from composition variations and nanoindentation data of diffusion couples.Then,the Ti-(22±0.5)at.%Nb-(30±0.5)at.%Zr-(4±0.5)at.%Cr(TNZC) alloy with a single body-centered cubic(BCC) phase was screened in an interactive loop.The experimental results exhibited a relatively low Young's modulus of(58±4) GPa,high nanohardness of(3.4±0.2) GPa,high microhardness of HV(520±5),high compressive yield strength of(1220±18) MPa,large plastic strain greater than 30%,and superior dry-and wet-wear resistance.This work demonstrates that ML combined with high-throughput analytic approaches can offer a powerful tool to accelerate the design of multicomponent Ti alloys with desired properties.Moreover,it is indicated that TNZC alloy is an attractive candidate for biomedical applications.
基金supported by the National Key Research and Development Program of China(2023YFB4005401)the National Natural Science Foundation of China(52425401,52204386)the Natural Science Foundation of Heilongjiang Province(JQ2023E003).
文摘Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_(32)V_(40+x)Fe_(23-x)Mn_(5)(x=0,4,8,12,at.%)alloys were designed,and the effects of V/Fe ratio on phase constitution and hydrogen storage properties were investigated.The main phase of the alloys is body-centered cubic(BCC)phase,and the lattice constants of the BCC phase decrease with the decrease of V/Fe ratio.Moreover,C14 Laves phase exists in alloys with a Fe content of 19at.%to 23at.%.For hydrogenation,the C14 Laves phase can accelerate the hydrogen absorption rate,but the hydrogen absorption capacity is reduced.With the decrease of V/Fe ratio,the hydride gradually destabilizes.Owing to its large lattice constant and high hydrogen absorption phase content,the Ti_(32)V_(52)Fe_(11)Mn_(5)alloy shows the most enhanced hydrogen storage properties with hydrogenation and dehydrogenation capacities of 3.588wt.%at 298 K and 1.688wt.%at 343 K,respectively.The hydrogen absorption capacity of this alloy can be reserved to 3.574wt.%after 20 cycles of hydrogen absorption and desorption.
文摘Using the modified Blonder-Tinkham-Klapwijk(BTK)theory,the interplay between the lifetime of quasi particles and the magnetic gap in a topological insulator-based ferromagnet/fwave superconductor(TI-based FM/f-wave SC)tunnel structure is theoretically studied.Two symmetries of f_(1) and f_(2) waves are considered for superconducting pairing states.The results indicate that reducing the finite quasi-particle lifetime will induce a transformation of energy-gap peaks into a zero-bias peak in tunneling conductance spectrum,as well as a transformation of energy-gap dips into a zero-bias dip in shot noise spectrum,ultimately resulting in the smoothing of the zero-bias conductance peak and the zero-bias shot noise dip.An increase in magnetic gap will suppress the tunnel conductance and shot noise when the conventional Andreev retroreflection dominates,but will enhance them when the specular Andreev reflection is dominant.Both specular Andreev reflection and conventional Andreev retro-reflection will be enhanced as the quasi-particle lifetime increases.When Fermi energy equals the magnetic gap,shot noise and tunneling conductance vanish across all energy ranges.These findings not only contribute to a better understanding of specular Andreev reflection in the FM/f-wave SC junction based on TIs but also provide insights for experimentally determining the f-wave pairing symmetry.
基金funding support providing by King Fahd University of Petroleum & Minerals through Project (SR161015)。
文摘The effects of thermal treatments on the structure, mechanical properties, wear resistance, and in vitro corrosion protection in artificial saliva(AS) were investigated for a newly developed Ti20 Nb13 Zr(TNZ) alloy. XRD and SEM analyses were used for structural and microstructural analysis. The in vitro corrosion properties of the samples were investigated using electrochemical impedance spectroscopy and linear polarization resistance techniques up to an immersion time of 168 h. The tribological characteristics were evaluated with a linear reciprocating tribometer. SEM analysis showed that solution treatment and aging influenced the size and distribution of α phase. The air-cooled and aged samples exhibited the highest microhardness and macrohardness, for which the wear resistances were 25% and 30% higher than that of the untreated sample, respectively. The cooling rate significantly influenced the corrosion resistance of the TNZ samples. The treated samples showed a reduced corrosion rate(50%) for long immersion time up to 168 h in AS. The furnace-cooled and aged samples exhibited the highest corrosion resistance after 168 h of immersion in AS. Among the treated samples, the aged sample showed enhanced mechanical properties, wear behavior, and in vitro corrosion resistance in AS.
基金financially supported by the National Natural Science Foundation of China(Nos.51671008 and 51701008)the Aeronautical Science Foundation of China(No.2013ZE51060)China Postdoctoral Science Foundation(No.2017M620575)。
文摘Ti47Cu38-xZr7.5Fe2.5Sn2 Si1 Ag2 Tax(x=1-4;at%,the same below)bulk metallic glasses(BMGs)with good bio-corrosion resistance and mechanical properties were fabricated by copper mold casting.Critical diameter of the Ti-based BMGs with 1 at%-4 at%Ta was 3 mm.The Ta-incorporated Ti-based BMGs exhibit higher open current potential and parallel passive current density in comparison with those of Ti-6 Al-4 V alloy in 0.9 wt%NaCl and Hank’s solution,implying their good corrosion resistance.The pitting corrosion potential of the Ti-based BMGs gradually increases up to about 1.25 V with Ta addition increasing up to 4 at%in 0.9 wt%NaCl solution.Among the present Ti-based BMGs,the alloy bearing2 at%Ta exhibits the optimal integration of mechanical properties,including the compressive fracture strength exceeding 2000 MPa,relative low Young’s modulus of98 GPa,plastic strain of 3.4%and high hardness of HV599.The Ta-bearing Ti-based bulk metallic glasses with integration of relative high GFA,good mechanical properties and high bio-corrosion resistance are beneficial for biomedical applications.
