To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by...To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.展开更多
The cenosphere dispersed Ti matrix composite was fabricated by powder metallurgy route, and its wear and corrosion behaviors were investigated. The results show that the microstructure of the fabricated composite cons...The cenosphere dispersed Ti matrix composite was fabricated by powder metallurgy route, and its wear and corrosion behaviors were investigated. The results show that the microstructure of the fabricated composite consists of dispersion of hollow cenosphere particles in a-Ti matrix. The average pore diameter varies from 50 to 150 μm. The presence of porosities is attributed to the damage of cenosphere particles due to the application of load during compaction as well as to the hollow nature of cenospheres. A detailed X-ray diffraction profile of the composites shows the presence of Al2O3, SiO2, TiO2 and α-Ti. The average microhardness of the composite （matrix） varies from HV 1100 to HV 1800 as compared with HV 240 of the as-received substrate. Wear studies show a significant enhancement in wear resistance against hardened steel ball and WC ball compared with that of commercially available Ti-6Al-4V alloy. The wear mechanism was established and presented in detail. The corrosion behavior of the composites in 3.56% NaCl （mass fraction） solution shows that corrosion potential （φcorr） shifts towards nobler direction with improvement in pitting corrosion resistance. However, corrosion rate of the cenosphere dispersed Ti matrix composite increases compared with that of the commercially available Ti-6Al-4V alloy.展开更多
Achieving intrinsic strengthening of boron nitride nanosheets(BNNSs)in Ti matrix composites was still an unsettled issue due to its severe and uncontrollable interface reaction.In the present study,high-performance BN...Achieving intrinsic strengthening of boron nitride nanosheets(BNNSs)in Ti matrix composites was still an unsettled issue due to its severe and uncontrollable interface reaction.In the present study,high-performance BNNSs/Ti composites were fabricated by using the warm compaction(WC)technique and rapid heat treatment(HT)strategy on the basis of interfacial nano-TiBw design.The intrinsic structure of BNNSs was well-retained and nano-TiBw on partially reacted BNNSs led to a brilliant interface bond-ing and BNNSs intrinsic strengthening.Tensile tests revealed that 0.1 wt.%BNNSs/Ti composites exhibited the tensile strength(UTS)of 876 MPa(61%higher than pure Ti)and the fracture elongation of 22.6%,demonstrating the well-balanced property.By employing the insitu TEM experiment,we solve an existing debate,uncovering the synergistic toughening effect from BNNSs and interfacial nano-TiBw which effectively inhibited the micro-cracks propagation on BNNSs and heterogeneous interface.This work paves a new way for developing high-performance BNNSs/Ti composites by reaction interface manipulation and underscores the importance of maintaining BNNSs intrinsic structure in the Ti matrix.展开更多
It is showed that there are Ti 3Al, Ti 2Cu and β phase in the interface of Ti/Ti Al composites reinforced with Y 2O 3 Cr composite soft coated Ti fiber, and that interface bonding is intact. Bending strength ...It is showed that there are Ti 3Al, Ti 2Cu and β phase in the interface of Ti/Ti Al composites reinforced with Y 2O 3 Cr composite soft coated Ti fiber, and that interface bonding is intact. Bending strength of the composites can be increased by 26%, to 709 MPa, and bending deflection increased slightly compared with the Ti/Ti Al composites reinforced by Ti fibers coated with Y 2O 3.展开更多
Stress shielding is caused by the mismatch of stiffness between bone and implant materials,which may give rise to bone resorption and loosening,thereby causing implantation failure.There is a huge gap between Young’s...Stress shielding is caused by the mismatch of stiffness between bone and implant materials,which may give rise to bone resorption and loosening,thereby causing implantation failure.There is a huge gap between Young’s modulus of human bone and low Young’s modulusβTi alloys.A porous structure design can achieve the target of low Young’s modulus,and thus achieve the matching between human bone and implant materials.However,a suitable space holder(SH)that can be applied at high temperatures and sintering pressure has not been reported.In this study,the TiZrNbTa/Ti titanium matrix composite(TMC)with high strength and large ductility was used as scaffold materials and combined the SH technique with the spark plasma sintering(SPS)technique to obtain a porous structure.A novel space holder,i.e.,MgO particles was adopted,which can withstand high-temperature sintering accompanied by a sintering pressure.The porous TiZrNbTa/Ti with 40 vol.%MgO added exhibits a maximum strength of 345.9±10.4 MPa and Young’s modulus of 24.72±0.20 GPa,respectively.It possesses higher strength compared with human bone and matches Young’s modulus of human bone,which exhibits great potential for clinical application.展开更多
There is keen interest in using Ti alloys as lightweight structural materials for aerospace and automotive industries.However,a long-standing problem for these materials is their poor oxidation resistance.Herein,we de...There is keen interest in using Ti alloys as lightweight structural materials for aerospace and automotive industries.However,a long-standing problem for these materials is their poor oxidation resistance.Herein,we designed and fabricated a Ti_(5)Si_(3) reinforced Ti-4(wt.%)Mo composite with two-scale network architecture by low energy milling and spark plasma sintering.It displays superior oxidation resistance at 800°C owing to the in-situ formation of a multi-component surface layer.This oxide layer has a dense grain size gradient structure that consists of an outer TiO_(2)layer and an inner SiO_(2)-padding-TiO_(2) layer,which has remarkable oxidation resistance and thermal stability.Furthermore,it was revealed that the hitherto unknown interaction between Ti_(5)Si_(3) reinforcement and nitrogen during oxidation would contribute to the formation of a TiN nano-twin interface layer,which accommodates the thermal mismatch strain between the oxide layer and matrix.This,along with high adhesion,confers excellent thermal cycling life with no cracking or spallation during long-term oxidation.In this regard,the secure operating temperature of this new composite can be increased to 800°C,which provides a design pathway for a new family of Ti matrix composites for high-temperature applications.展开更多
To explore the approaches of combined toughening and strengthening of the Al_3Ti-based L1_2 intermetallic alloys, multiphase Al_3Ti alloys formed by combining with reinforcement or by second phase precipitation are be...To explore the approaches of combined toughening and strengthening of the Al_3Ti-based L1_2 intermetallic alloys, multiphase Al_3Ti alloys formed by combining with reinforcement or by second phase precipitation are being studied. The interface reactions between Al_(66)Fe_9Ti_(25)matrix and SiC reinforcement were investigated. It is determined that SiC is chemically incompatible with the Al_(66)Fe_9Ti_(25)matrix, Al_2O_3 barrier coating on SiC by sol-gel process was developed to minimize the interfacial reactions. On the other hand, a new type of Al_3Ti-based alloy having a L1_2 matrix with second phase precipitation has been developed. The quaternary alloys based on Al_(66)Fe_9Ti_(25)and modified with Nb additions, consist of a L1_2 matrix and D0_(22) second phase in the annealed state ,but the second phase can be dissolved by solution treatment and precipitated during high temperature aging.展开更多
基金supported by the Tianjin Municipal Natural Science Foundation(No.23JCYBJC00040)the National Nat-ural Science Foundation of China(No.52175369)the Tian-jin Research Innovation Project for Postgraduate Students(No.2022SKY134).
文摘To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.
基金Financial supports from various funding agencies Tata Steel, Jamshedpur, Department of Science and Technology, New Delhi, Council of Scientific and Industrial Research, New Delhi and Board of Research on Nuclear Science, Bombay for the present study are gratefully acknowledged
文摘The cenosphere dispersed Ti matrix composite was fabricated by powder metallurgy route, and its wear and corrosion behaviors were investigated. The results show that the microstructure of the fabricated composite consists of dispersion of hollow cenosphere particles in a-Ti matrix. The average pore diameter varies from 50 to 150 μm. The presence of porosities is attributed to the damage of cenosphere particles due to the application of load during compaction as well as to the hollow nature of cenospheres. A detailed X-ray diffraction profile of the composites shows the presence of Al2O3, SiO2, TiO2 and α-Ti. The average microhardness of the composite （matrix） varies from HV 1100 to HV 1800 as compared with HV 240 of the as-received substrate. Wear studies show a significant enhancement in wear resistance against hardened steel ball and WC ball compared with that of commercially available Ti-6Al-4V alloy. The wear mechanism was established and presented in detail. The corrosion behavior of the composites in 3.56% NaCl （mass fraction） solution shows that corrosion potential （φcorr） shifts towards nobler direction with improvement in pitting corrosion resistance. However, corrosion rate of the cenosphere dispersed Ti matrix composite increases compared with that of the commercially available Ti-6Al-4V alloy.
基金the National Natural Science Foundation of China(No.52301186)the Fundamental Research Funds for the Central Universitiesthe Young Elite Scientists Sponsorship Program by CAST(Grant No.2022QNRC001).
文摘Achieving intrinsic strengthening of boron nitride nanosheets(BNNSs)in Ti matrix composites was still an unsettled issue due to its severe and uncontrollable interface reaction.In the present study,high-performance BNNSs/Ti composites were fabricated by using the warm compaction(WC)technique and rapid heat treatment(HT)strategy on the basis of interfacial nano-TiBw design.The intrinsic structure of BNNSs was well-retained and nano-TiBw on partially reacted BNNSs led to a brilliant interface bond-ing and BNNSs intrinsic strengthening.Tensile tests revealed that 0.1 wt.%BNNSs/Ti composites exhibited the tensile strength(UTS)of 876 MPa(61%higher than pure Ti)and the fracture elongation of 22.6%,demonstrating the well-balanced property.By employing the insitu TEM experiment,we solve an existing debate,uncovering the synergistic toughening effect from BNNSs and interfacial nano-TiBw which effectively inhibited the micro-cracks propagation on BNNSs and heterogeneous interface.This work paves a new way for developing high-performance BNNSs/Ti composites by reaction interface manipulation and underscores the importance of maintaining BNNSs intrinsic structure in the Ti matrix.
文摘It is showed that there are Ti 3Al, Ti 2Cu and β phase in the interface of Ti/Ti Al composites reinforced with Y 2O 3 Cr composite soft coated Ti fiber, and that interface bonding is intact. Bending strength of the composites can be increased by 26%, to 709 MPa, and bending deflection increased slightly compared with the Ti/Ti Al composites reinforced by Ti fibers coated with Y 2O 3.
基金financially supported by the National Natural Science Foundation of China(No.51871077)the Guangdong Basic and Applied Basic Research Foundation(No.2021A1515012626)+3 种基金the Shenzhen Knowledge Innovation Plan-Fundamental Re-search(Discipline Distribution)(No.JCYJ20180507184623297)the S henzhen Science and Technology Plan-Technology Innovation(No.KQJSCX20180328165656256)the Development and Reform Commission of Shenzhen Municipality-Shenzhen R&D Center for Al-based Hydrogen Hydrolysis Materials(No.ZX20190229)the Startup Foundation from Shenzhen and Startup Foundation from Harbin Institute of Technology(Shenzhen).
文摘Stress shielding is caused by the mismatch of stiffness between bone and implant materials,which may give rise to bone resorption and loosening,thereby causing implantation failure.There is a huge gap between Young’s modulus of human bone and low Young’s modulusβTi alloys.A porous structure design can achieve the target of low Young’s modulus,and thus achieve the matching between human bone and implant materials.However,a suitable space holder(SH)that can be applied at high temperatures and sintering pressure has not been reported.In this study,the TiZrNbTa/Ti titanium matrix composite(TMC)with high strength and large ductility was used as scaffold materials and combined the SH technique with the spark plasma sintering(SPS)technique to obtain a porous structure.A novel space holder,i.e.,MgO particles was adopted,which can withstand high-temperature sintering accompanied by a sintering pressure.The porous TiZrNbTa/Ti with 40 vol.%MgO added exhibits a maximum strength of 345.9±10.4 MPa and Young’s modulus of 24.72±0.20 GPa,respectively.It possesses higher strength compared with human bone and matches Young’s modulus of human bone,which exhibits great potential for clinical application.
基金financially supported by the National Natural Science Foundation of China(NSFC)[Grant No.51534009]National Key R&D Program of China[Grant No.2017YFB0306001]Natural Science Foundation of Hunan Province China(Grant No.2021JJ40750)。
文摘There is keen interest in using Ti alloys as lightweight structural materials for aerospace and automotive industries.However,a long-standing problem for these materials is their poor oxidation resistance.Herein,we designed and fabricated a Ti_(5)Si_(3) reinforced Ti-4(wt.%)Mo composite with two-scale network architecture by low energy milling and spark plasma sintering.It displays superior oxidation resistance at 800°C owing to the in-situ formation of a multi-component surface layer.This oxide layer has a dense grain size gradient structure that consists of an outer TiO_(2)layer and an inner SiO_(2)-padding-TiO_(2) layer,which has remarkable oxidation resistance and thermal stability.Furthermore,it was revealed that the hitherto unknown interaction between Ti_(5)Si_(3) reinforcement and nitrogen during oxidation would contribute to the formation of a TiN nano-twin interface layer,which accommodates the thermal mismatch strain between the oxide layer and matrix.This,along with high adhesion,confers excellent thermal cycling life with no cracking or spallation during long-term oxidation.In this regard,the secure operating temperature of this new composite can be increased to 800°C,which provides a design pathway for a new family of Ti matrix composites for high-temperature applications.
文摘To explore the approaches of combined toughening and strengthening of the Al_3Ti-based L1_2 intermetallic alloys, multiphase Al_3Ti alloys formed by combining with reinforcement or by second phase precipitation are being studied. The interface reactions between Al_(66)Fe_9Ti_(25)matrix and SiC reinforcement were investigated. It is determined that SiC is chemically incompatible with the Al_(66)Fe_9Ti_(25)matrix, Al_2O_3 barrier coating on SiC by sol-gel process was developed to minimize the interfacial reactions. On the other hand, a new type of Al_3Ti-based alloy having a L1_2 matrix with second phase precipitation has been developed. The quaternary alloys based on Al_(66)Fe_9Ti_(25)and modified with Nb additions, consist of a L1_2 matrix and D0_(22) second phase in the annealed state ,but the second phase can be dissolved by solution treatment and precipitated during high temperature aging.
