The partitioning effect of Al（α-phase stabilizer） and V elements（β-phase stabilizer） on strength of the primary α phases in the α/β Ti-6 Al-4 V alloy with the bimodal microstructure was investigated.It was fo...The partitioning effect of Al（α-phase stabilizer） and V elements（β-phase stabilizer） on strength of the primary α phases in the α/β Ti-6 Al-4 V alloy with the bimodal microstructure was investigated.It was found that partitioning of Al and V elements took place in the Ti-6 Al-4 V alloy during the recrystallization process,leading to the variation of the content of Al and V elements in the primary α phases with changing the volume fraction of the primary α phase.Nanoindentation tests reveal a general trend that the strength of the primary α phases increases with decreasing the volume fraction of the primary α phases,and such trend is independent on the loading direction relative to the c-axis of the α phase.The enhanced strength is attributed to the increase of the content of Al element in the primary α phase,but it is not dominated evidently by the change of the V content.The solid solution strengthening contributed from both the elastic strain introduced by the solute atoms and the variation of the density of states was estimated theoretically.展开更多
The Binchuan area of Yunnan is located in the western part of the Emeishan large igneous province in the western margin of the Yangtze Block. In the present study, the Wuguiqing profile in thickness of about 1440 m is...The Binchuan area of Yunnan is located in the western part of the Emeishan large igneous province in the western margin of the Yangtze Block. In the present study, the Wuguiqing profile in thickness of about 1440 m is mainly composed of high-Ti basalts, with minor picrites in the lower part and andesites, trachytes, and rhyolites in the upper part. The picrites have relatively higher platinum- group element （PGE） contents （PGE=16.3-28.2 ppb）, with high Cu/Zr and Pd/Zr ratios, and low S contents （5.03-16.9 ppm）, indicating the parental magma is S-unsaturated and generated by high degree of partial melting of the Emeishan large igneous province （ELIP） mantle source. The slightly high Cu/Pd ratios （11 000-24 000） relative to that of the primitive mantle suggest that 0.007% sulfides have been retained in the mantle source. The PGE contents of the high-Ti basalts exhibit a wider range （~PGE=0.517-30.8 ppb）. The samples in the middle and upper parts are depleted in PGE and have ~Nd （260 Ma） ratios ranging from -2.8 to -2.2, suggesting that crustal contamination of the parental magma during ascent triggered sulfur saturation and segregation of about 0.446%-0.554% sulfides, and the sulfide segregation process may also provide the ore-forming material for the magmatic Cu-Ni-PGE sulfide deposits close to the studied basalts. The samples in this area show Pt- Pd type primitive mantle-normalized PGE patterns, and the Pd/Ir ratios are higher than that of the primitive mantle （Pd/Ir=l）, indicating that the obvious differentiation between Ir-group platinum- group elements （IPGE） and Pd-group platinum-group elements （PPGE） are mainly controlled by olivine or chromites fractionation during magma evolution. The Pd/Pt ratios of most samples are higher than the average ratio of mantle （Pd/Pt=0.55）, showing that the differentiation happened between Pt and Pd. The differentiation in picrites may be relevant to Pt hosted in discrete refractory Pt-alloy phase in the mantle; whereas the differentiation in the high-Ti basalts is probably associated with the fractionation of Fe-Pt alloys, coprecipitating with Ir-Ru-Os alloys. Some high-Ti basalt samples exhibit negative Ru anomalies, possibly due to removal of laurite collected by the early crystallized chromites.展开更多
A new model was established to calculate the real vapor pressure of the Al element in the molten Ti x Al ( x = 25 ～ 50, mole fraction, %) alloy. The effects of the holding time, chamber pressure, mole fraction of Al ...A new model was established to calculate the real vapor pressure of the Al element in the molten Ti x Al ( x = 25 ～ 50, mole fraction, %) alloy. The effects of the holding time, chamber pressure, mole fraction of Al and melting temperature on the real vapor pressure of Al element in the vacuum chamber were analyzed. Because of the impeding effect of the real vapor pressure on the evaporation loss rate, within a short time (less than 10?s), the real vapor pressure tends to a constant value. When the chamber pressure is less than the saturated vapor pressure of the Al component, the real vapor pressure of Al is equal to the chamber pressure. While when the chamber pressure is larger than the saturated vapor pressure, the real vapor pressure is equal to the saturated vapor pressure of the Al element of the same condition.展开更多
By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L...By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L12 Al3Ti-base intermetallic compound. The results are presented using the density of states (DOS) and one-electron properties, such as relative binding tendency between the atom and the model cluster, and hybrid bonding tendency between the alloying element and the host atoms. By comparing the four models of Ti4Al14X cluster, the effect of the Fe, Ni or Cu atom on the physical properties of Al3Ti-based L12 intermetallic compounds is analyzed. The results indicate that the addition of the Fe, Ni or Cu atom intensifies the relative binding tendency between Ti atom and Ti4Al14X cluster. It was found that the Fermi level (EF) lies in a maximum in the DOS for Ti4Al14Al cluster; on the contrary, the EF comes near a minimum tn the DOS for Ti4Al14X (X=Fe, Ni and Cu) cluster. Thus the L12 crystal structure for binary Al3Ti alloy is unstable, and the addition of the Fe, Ni or Cu atom to Al3Ti is benefical to stabilize L12 crystal structure. The calculation also shows that the Fe, Ni or Cu atom strengthens the hybrid bonding tendency between the central atom and the host atoms for Ti4Al14X cluster and thereby may lead to the constriction of the lattice of Al3Ti-base intermetallic compounds.展开更多
Anodizing is expected to be an effective method to improve the osteoconductivity of the Ti-29Nb-13Ta-4.6Zr (TNTZ) alloy because the bioactivity of anodized Ti is good. However, it is not known how the alloy elements i...Anodizing is expected to be an effective method to improve the osteoconductivity of the Ti-29Nb-13Ta-4.6Zr (TNTZ) alloy because the bioactivity of anodized Ti is good. However, it is not known how the alloy elements influence the surface roughness, composition, hydrophilicity, and osteoconductivity of the anodized film on the Ti alloy. In this study, we investigated the effects of anodizing on the surface properties and the osteoconductivity of the anodized TNTZ alloy, focusing on the functions of the individual alloy elements. The anodized oxides of the Nb, Ta, and Zr metals were hydrophobic at all the voltages applied, in contrast to the anodized oxide of Ti. As well as pure Ti, a TiO2-based oxide film formed on TNTZ after anodizing. However, the oxide film also contained large amounts of Nb species and the molar Nb/Ti ratio in the TNTZ alloy was high, which makes the surface more hydrophobic than the anodized oxide on Ti. In vivo tests showed that the osteoconductivity of the TNTZ alloy was sensitive to both its surface roughness and hydrophilicity. When the TNTZ alloy was anodized, the process increased either the surface hydrophobicity or the surface roughness at the voltage used in this study. These changes in the surface properties did not improve its osteoconductivity.展开更多
A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step...A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step process including alkali fusion, water leaching and acidolysis. Following these processes under the optimum conditions, the recovery ratios of TiO2, Al2O3, SiO2 and MgO were about 97.5, 93.5, 27.9 and 53.5%, respectively. Meanwhile, nanostructured TiO2, NaA zeolite and Mg（OH）2 fire retardant were synthesized simultaneously by using Ti-bearing EAF slag as raw materials. In addition, the photocatalytic activity of prepared nanostructured TiO2 and the adsorption property of obtained NaA zeolite were investigated. The results showed that the photodegradation efficiency of as-prepared TiO2 was 80% for rhodamine B and the adsorption efficiency of NaA zeolite was 61% for Cu2＋ under the optimum conditions.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos.51371180 and 51571199)
文摘The partitioning effect of Al（α-phase stabilizer） and V elements（β-phase stabilizer） on strength of the primary α phases in the α/β Ti-6 Al-4 V alloy with the bimodal microstructure was investigated.It was found that partitioning of Al and V elements took place in the Ti-6 Al-4 V alloy during the recrystallization process,leading to the variation of the content of Al and V elements in the primary α phases with changing the volume fraction of the primary α phase.Nanoindentation tests reveal a general trend that the strength of the primary α phases increases with decreasing the volume fraction of the primary α phases,and such trend is independent on the loading direction relative to the c-axis of the α phase.The enhanced strength is attributed to the increase of the content of Al element in the primary α phase,but it is not dominated evidently by the change of the V content.The solid solution strengthening contributed from both the elastic strain introduced by the solute atoms and the variation of the density of states was estimated theoretically.
基金supported by the National Basic Research Program of China(No.2007CB411401)the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KZCX2-YW-136)the National Natural Science Formation of China(No.40873028)
文摘The Binchuan area of Yunnan is located in the western part of the Emeishan large igneous province in the western margin of the Yangtze Block. In the present study, the Wuguiqing profile in thickness of about 1440 m is mainly composed of high-Ti basalts, with minor picrites in the lower part and andesites, trachytes, and rhyolites in the upper part. The picrites have relatively higher platinum- group element （PGE） contents （PGE=16.3-28.2 ppb）, with high Cu/Zr and Pd/Zr ratios, and low S contents （5.03-16.9 ppm）, indicating the parental magma is S-unsaturated and generated by high degree of partial melting of the Emeishan large igneous province （ELIP） mantle source. The slightly high Cu/Pd ratios （11 000-24 000） relative to that of the primitive mantle suggest that 0.007% sulfides have been retained in the mantle source. The PGE contents of the high-Ti basalts exhibit a wider range （~PGE=0.517-30.8 ppb）. The samples in the middle and upper parts are depleted in PGE and have ~Nd （260 Ma） ratios ranging from -2.8 to -2.2, suggesting that crustal contamination of the parental magma during ascent triggered sulfur saturation and segregation of about 0.446%-0.554% sulfides, and the sulfide segregation process may also provide the ore-forming material for the magmatic Cu-Ni-PGE sulfide deposits close to the studied basalts. The samples in this area show Pt- Pd type primitive mantle-normalized PGE patterns, and the Pd/Ir ratios are higher than that of the primitive mantle （Pd/Ir=l）, indicating that the obvious differentiation between Ir-group platinum- group elements （IPGE） and Pd-group platinum-group elements （PPGE） are mainly controlled by olivine or chromites fractionation during magma evolution. The Pd/Pt ratios of most samples are higher than the average ratio of mantle （Pd/Pt=0.55）, showing that the differentiation happened between Pt and Pd. The differentiation in picrites may be relevant to Pt hosted in discrete refractory Pt-alloy phase in the mantle; whereas the differentiation in the high-Ti basalts is probably associated with the fractionation of Fe-Pt alloys, coprecipitating with Ir-Ru-Os alloys. Some high-Ti basalt samples exhibit negative Ru anomalies, possibly due to removal of laurite collected by the early crystallized chromites.
文摘A new model was established to calculate the real vapor pressure of the Al element in the molten Ti x Al ( x = 25 ～ 50, mole fraction, %) alloy. The effects of the holding time, chamber pressure, mole fraction of Al and melting temperature on the real vapor pressure of Al element in the vacuum chamber were analyzed. Because of the impeding effect of the real vapor pressure on the evaporation loss rate, within a short time (less than 10?s), the real vapor pressure tends to a constant value. When the chamber pressure is less than the saturated vapor pressure of the Al component, the real vapor pressure of Al is equal to the chamber pressure. While when the chamber pressure is larger than the saturated vapor pressure, the real vapor pressure is equal to the saturated vapor pressure of the Al element of the same condition.
文摘By use of self-consistent field Xα scattered-wave (SCF-Xα-SW) method, the electronic structure was calculated for four models of Ti4Al14X (X=Al, Fe, Ni and Cu) clusters. The Ti4Al14X cluster was developed based on L12 Al3Ti-base intermetallic compound. The results are presented using the density of states (DOS) and one-electron properties, such as relative binding tendency between the atom and the model cluster, and hybrid bonding tendency between the alloying element and the host atoms. By comparing the four models of Ti4Al14X cluster, the effect of the Fe, Ni or Cu atom on the physical properties of Al3Ti-based L12 intermetallic compounds is analyzed. The results indicate that the addition of the Fe, Ni or Cu atom intensifies the relative binding tendency between Ti atom and Ti4Al14X cluster. It was found that the Fermi level (EF) lies in a maximum in the DOS for Ti4Al14Al cluster; on the contrary, the EF comes near a minimum tn the DOS for Ti4Al14X (X=Fe, Ni and Cu) cluster. Thus the L12 crystal structure for binary Al3Ti alloy is unstable, and the addition of the Fe, Ni or Cu atom to Al3Ti is benefical to stabilize L12 crystal structure. The calculation also shows that the Fe, Ni or Cu atom strengthens the hybrid bonding tendency between the central atom and the host atoms for Ti4Al14X cluster and thereby may lead to the constriction of the lattice of Al3Ti-base intermetallic compounds.
文摘Anodizing is expected to be an effective method to improve the osteoconductivity of the Ti-29Nb-13Ta-4.6Zr (TNTZ) alloy because the bioactivity of anodized Ti is good. However, it is not known how the alloy elements influence the surface roughness, composition, hydrophilicity, and osteoconductivity of the anodized film on the Ti alloy. In this study, we investigated the effects of anodizing on the surface properties and the osteoconductivity of the anodized TNTZ alloy, focusing on the functions of the individual alloy elements. The anodized oxides of the Nb, Ta, and Zr metals were hydrophobic at all the voltages applied, in contrast to the anodized oxide of Ti. As well as pure Ti, a TiO2-based oxide film formed on TNTZ after anodizing. However, the oxide film also contained large amounts of Nb species and the molar Nb/Ti ratio in the TNTZ alloy was high, which makes the surface more hydrophobic than the anodized oxide on Ti. In vivo tests showed that the osteoconductivity of the TNTZ alloy was sensitive to both its surface roughness and hydrophilicity. When the TNTZ alloy was anodized, the process increased either the surface hydrophobicity or the surface roughness at the voltage used in this study. These changes in the surface properties did not improve its osteoconductivity.
基金This study was supported by the National Natural Science Foundation of China （Nos. 51471122 and 51604202）, the China Postdoctoral Science Foundation （No. 2016M592397） and the Science and Technology Project of Guangdong Province （No. 2013B090600025）.
文摘A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step process including alkali fusion, water leaching and acidolysis. Following these processes under the optimum conditions, the recovery ratios of TiO2, Al2O3, SiO2 and MgO were about 97.5, 93.5, 27.9 and 53.5%, respectively. Meanwhile, nanostructured TiO2, NaA zeolite and Mg（OH）2 fire retardant were synthesized simultaneously by using Ti-bearing EAF slag as raw materials. In addition, the photocatalytic activity of prepared nanostructured TiO2 and the adsorption property of obtained NaA zeolite were investigated. The results showed that the photodegradation efficiency of as-prepared TiO2 was 80% for rhodamine B and the adsorption efficiency of NaA zeolite was 61% for Cu2＋ under the optimum conditions.
