The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbul...The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.展开更多
CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated ele...CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated electron-hole pairs,which limits their efficiency on various reactions.Controlling morphological structures and crystal facets engineering are effective methods to enhance the photocatalytic performance of CdS.In this work,two different forms of CdS photocatalysts were synthesized by a hydrothermal method,namely nanoflower-shaped (CdS-NF) and nanorod-shaped (CdS-NR) for hydrogen peroxide (H_(2)O_(2)) production.The exposed crystal planes of CdS-NF are mainly (0 0 2) planes,while the accesible crystal planes of CdS-NR are notablly (1 0 1) planes.Notably,the photocatalytic hydrogen peroxide production yield of CdS-NR was high at 1225.13 μmol·h^(−1)·g^(−1),which is 1.78 times higher than the H_(2)O_(2) generation rate of CdS-NF.Moreover,through free radical capture experiments and DFT calculations,the reaction pathway was further explored.Both different configurations of cadmium sulfide based photocatalysts conform to the reaction mechanism of oxygen reduction as the main and water oxidation as the auxiliary.展开更多
Avian cognitive abilities rival those of primates.These capacities have been linked to high pallial neuronal density and prefrontal cortex-like dorsal ventricular ridge(DVR)circuitry.Although the DVR is now recognized...Avian cognitive abilities rival those of primates.These capacities have been linked to high pallial neuronal density and prefrontal cortex-like dorsal ventricular ridge(DVR)circuitry.Although the DVR is now recognized as a pallial structure homologous to the mammalian cortex,its morphological basis remains unclear.Here,we combine Nissl staining,Golgi-Cox labeling,and 3D reconstruction to map neuronal morphology across five telencephalic regions in the Rock Pigeon(Columba livia).From 64 fully reconstructed neurons,we quantified dendritic field area,total dendritic length,branching architecture,and radial arbor organization.DVR neurons showed the largest dendritic fields and the highest branching complexity.Single-nucleus transcriptomic data further revealed that the Nidopallium Caudolaterale(NCL),the core DVR subregion,expresses a neuronmorphogenesis gene module whose activity correlates with dendritic field size.Together,these results identify a molecular and morphological signature of DVR neurons and highlight the computational significance of Nidopallium Caudolaterale.This work provides an integrated comparison of telencephalic neuronal morphology and gene expression in birds.展开更多
While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics ...While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics of wheels processed through this method remain insufficiently characterized and warrant further investigation.This study employed an in-situ experimental setup to analyze MD-GW sharpened through MW discharge,with a focus on abrasive damage,grit protrusion height and uniformity,the number of effective abrasives,chip space,and bond morphology.The grinding performance of MW-sharpened MD-GW was assessed based on dynamic grinding ratios and surface quality in zirconia grinding experiments,using mechanical sharpening as the comparison group.The results revealed that MW sharpening enhanced abrasive integrity when compared to mechanical methods,albeit with minor graphitization and localized oxidative damage occurring.Furthermore,after being sharpened by the MW method,the grit protrusion height increased,demonstrating good uniformity,and simultaneously exhibiting a higher number of effective abrasives.Noticeable craters formed in proximity to the abrasives,augmenting chip space,but sputtering led to the formation of metal deposition layers on the abrasive surfaces.The MW-sharpened wheel exhibited superior grinding wear ratios,with dynamic grinding ratios initially increasing and subsequently decreasing as the grinding process pro-gressed.These enhancements in surface morphology allowed the MW-sharpened MD-GW to remove zirconia ceramics in a ductile manner,resulting in improved grinding surface quality.The importance of this study lies in the development of an innovative sharpening technique that improved the surface morphology quality of MD-GW,with potential ramifications for enhancing the efficiency and quality of grinding difficult-to-machine materials.展开更多
Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessit...Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessitating the extensive use of in-situ monitoring to enable real-time adjustments of process parameters by detecting molten-pool features.To address the challenge of accurately extracting the molten-pool morphology from an undetached spatter,an innovative monitoring method based on the U-Net(U-shaped network)is proposed herein.A lightweight architecture accelerates the processing speed,whereas an enhanced loss function incorporating weight maps augments the segmentation precision.The model performance is evaluated by comparing its segmentation accuracy and processing speed with those of the conventional U-Net,using the mean intersection over union(MIoU)as the segmentation metric.The improved model demonstrates superior segmentation accuracy at the interface between the molten pool and spatter,with a peak MIoU of 0.9798 achieved on the test set.Furthermore,this model processes each image in an extremely short time of 17.9 ms.Using this segmentation algorithm,the error in extracting the molten-pool width from single-track experiments is within 0.1 mm.The proposed method for monitoring the molten-pool morphology is suitable for deployment in online monitoring systems,thus providing a foundation for subsequent process-parameter regulation.展开更多
Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structur...Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structural studies of other physicochemical properties are con-ducted on a series of materials obtained by the sol-gel method with different ratios of Gd and Sm cations.It is documented that changing the x value,and the resulting adjustment of the average ionic radius,have a significant impact on the crystal structure,stability,as well as on the total conductivity and thermomechanical properties of the materials,with the best results obtained for the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)composition.Oxygen electrodes are prepared using the selected compound,allowing to obtain low polarization resistance values,such as 0.086Ω·cm^(2)at 800℃.Systematic studies of electrocatalytic activity are conducted using La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(_(0.2))O_(3−δ)as the electrolyte for all electrodes,and Ce_(0.8)Gd_(0.2)O_(2−δ)electrolyte for the best performing Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes.The electrochemical data are analyzed using the distribution of relaxation times method.Also,the influence of the preparation method of the electrode material is in-ve`stigated using the electrospinning technique.Finally,the performance of the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes is tested in a Ni-YSZ(yttria-stabilized zirconia)anode-supported cell with a Ce_(0.8)Gd_(0.2)O_(2−δ)buffer layer,in the fuel cell and electrolyzer operating modes.With the electrospun electrode,a power density of 462 mW·cm^(−2)is obtained at 700℃,with a current density of ca.0.2 A·cm^(−2)at 1.3 V for the electrolysis at the same temperature,indicating better performance compared to the sol-gel-based electrode.展开更多
Zinc oxide(ZnO)serves as a crucial functional semiconductor with a wide direct bandgap of approximately 3.37 eV.Solvothermal reaction is commonly used in the synthesis of ZnO micro/nanostructures,given its low cost,si...Zinc oxide(ZnO)serves as a crucial functional semiconductor with a wide direct bandgap of approximately 3.37 eV.Solvothermal reaction is commonly used in the synthesis of ZnO micro/nanostructures,given its low cost,simplicity,and easy implementation.Moreover,ZnO morphology engineering has become desirable through the alteration of minor conditions in the reaction process,particularly at room temperature.In this work,ZnO micro/nanostructures were synthesized in a solution by varying the amounts of the ammonia added at low temperatures(including room temperature).The formation of Zn^(2+)complexes by ammonia in the precursor regulated the reaction rate of the morphology engineering of ZnO,which resulted in various structures,such as nanoparticles,nanosheets,microflowers,and single crystals.Finally,the obtained ZnO was used in the optoelectronic application of ultraviolet detectors.展开更多
A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between ...A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between morphology and vegetation under similar tidal conditions.Our analysis of correlations and inferences revealed several significant trends in the SRD:(1)an overall expansion of land area and intertidal vegetation,with the most pronounced changes occurring in the eastern sector;(2)the predominance of river discharge influencing the southwestern and northern sectors,contrasted with the primary impact of storm surges in the eastern sector;and(3)three distinct causal relationships among estuarine morphology,vegetation,storm surges,and river discharge:a direct model where river discharge shapes estuarine morphology,a progressive model in which river discharge affects vegetation distribution,subsequently influencing estuarine morphology,and a hybrid model where storm surges directly impact vegetation and indirectly modify its distribution through changes in estuarine morphology.The stability of sediment supply and the role of intertidal vegetation are crucial for the continuous seaward advance,providing a vital foundation for the protection and development of estuarine deltas.展开更多
Fueled by the increasing imperative for sustainable energy solutions and the burgeoning emphasis on health awareness,self-powered techniques have undergone notable strides in advancement.Triboelectric nanogenerators(T...Fueled by the increasing imperative for sustainable energy solutions and the burgeoning emphasis on health awareness,self-powered techniques have undergone notable strides in advancement.Triboelectric nanogenerators(TENGs)stand out as a prominent device capitalizing on the principles of triboelectrification and electrostatic induction to generate electricity or electrical signals.In efforts to augment the electrical output performance of TENGs and broaden their range of applications,researchers have endeavored to refine materials,surface morphology,and structural design.Among them,physical morphological modifications play a pivotal role in enhancing the electrical properties of TENGs by increasing the contact surface area,which can be achieved by building micro-/nano-structures on the surface or inside the friction material.In this review,we summarize the common morphologies of TENGs,categorize the morphologies into surface and internal structures,and elucidate their roles in enhancing the electric output performance of devices.Moreover,we systematically classify the methodologies employed for morphological preparation into physical and chemical approaches,thereby furnishing a comprehensive survey of the diverse techniques.Subsequently,typical applications of TENGs with special morphology divided by energy harvesting and self-powered sensors are presented.Finally,an overview of the challenges and future trajectories pertinent to TENGs is conducted.Through this endeavor,the aim of this article is to catalyze the evolution of further strategies for enhancing performance of TENGs.展开更多
Morphological alterations in dendritic spines have been linked to changes in functional communication between neurons that affect learning and memory.Kinesin-4 KIF21A helps organize the microtubule-actin network at th...Morphological alterations in dendritic spines have been linked to changes in functional communication between neurons that affect learning and memory.Kinesin-4 KIF21A helps organize the microtubule-actin network at the cell cortex by interacting with KANK1;however,whether KIF21A modulates dendritic structure and function in neurons remains unknown.In this study,we found that KIF21A was distributed in a subset of dendritic spines,and that these KIF21A-positive spines were larger and more structurally plastic than KIF21A-negative spines.Furthermore,the interaction between KIF21A and KANK1 was found to be critical for dendritic spine morphogenesis and synaptic plasticity.Knockdown of either KIF21A or KANK1 inhibited dendritic spine morphogenesis and dendritic branching,and these deficits were fully rescued by coexpressing full-length KIF21A or KANK1,but not by proteins with mutations disrupting direct binding between KIF21A and KANK1 or binding between KANK1 and talin1.Knocking down KIF21A in the hippocampus of rats inhibited the amplitudes of long-term potentiation induced by high-frequency stimulation and negatively impacted the animals’cognitive abilities.Taken together,our findings demonstrate the function of KIF21A in modulating spine morphology and provide insight into its role in synaptic function.展开更多
Introduction: the left atrial appendage, a dormant embryonic vestige, would play a major role in cardiac hemodynamic changes, volume homeostasis and thrombi formation. It, therefore constitutes a therapeutic target. I...Introduction: the left atrial appendage, a dormant embryonic vestige, would play a major role in cardiac hemodynamic changes, volume homeostasis and thrombi formation. It, therefore constitutes a therapeutic target. Its morphology is extremely variable. Objective: it consisted on determining the morphological variations of the left auricle as well as their interest in the prevention of thrombi in the Senegalese. Material and Method: This study was conducted by dissecting 36 fresh hearts from Senegalese anatomical subjects with a sampling of the left atrial appendage, including specimens with normal morphological appearance. Their morphology was studied using the fresh and frozen plaster molding method. The data obtained were analyzed statistically. Results: the average age of the subjects was 33 years, with a sex ratio of 1.06, the cauliflower shape was dominant with 57% of cases and the cactus shape (4%) was less frequent. The cauliflower shape presented a clear angulation compared to the others without statistically significant differences according to age. Conclusion: This work showed a great morphological variability of the left atrial appendage. It can provide an update on the specificity of Senegalese. Taking these variations into account is important in the safe management of hemodynamic conditions and the improvement of the management of recurrent strokes.展开更多
The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influen...The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influenced by the morphology of the support.Hydrothermal synthesis was employed to produce different morphologies ofγ-Al_(2)O_(3):flower-likeγ-Al_(2)O_(3)(f)exposing(110)crystal faces,sheet-likeγ-Al_(2)O_(3)(s)revealing(100)crystal faces,and rod-likeγ-Al_(2)O_(3)(r)displaying(111)crystal faces,followed by loading PtCo nanoparticles.The exposed crystal faces of the support impact the alloying degree of the PtCo nanoparticles,and an increase in the alloying degree correlates with enhanced catalyst reactivity.Pt_(3)Co intermetallic compounds were identified onγ-Al_(2)O_(3)(f)exposing(110)crystal faces,and PtCo/γ-Al_(2)O_(3)(f)showed high catalytic activity in the CO-PROX reaction,achieving 100%CO conversion across a broad temperature range of 50−225°C.In contrast,only partial alloying of PtCo was observed onγ-Al_(2)O_(3)(s).Furthermore,no alloying between Pt and Co occurred in PtCo/γ-Al_(2)O_(3)(r),resulting in a reaction rate at 50°C that was merely 11%of that of PtCo/γ-Al_(2)O_(3)(f).The formation of Pt3Co intermetallic compounds led to a more oxidized state of Pt,which significantly diminished the adsorption of CO on Pt and augmented the active oxygen species,thereby facilitating the selective oxidation of CO.展开更多
To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Ba...To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.展开更多
The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust pe...The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.展开更多
This study investigates the effects of honey concentration on the crystallinity,morphology,and thermal behavior of zein-based polymer systems,aiming to assess honey’s role as a natural plasticizer.Fourier transform i...This study investigates the effects of honey concentration on the crystallinity,morphology,and thermal behavior of zein-based polymer systems,aiming to assess honey’s role as a natural plasticizer.Fourier transform infrared spectroscopy(FTIR)analysis confirmed the presence of strong intermolecular interactions and hydrogen bonding between zein and honey,indicating good miscibility.X-ray diffraction(XRD)patterns revealed a significant reduction in crystallinity with increasing honey concentration up to 25 wt.%,with the ZH5(75 wt.%zein-25 wt.%honey)sample exhibiting the smallest crystallite size(4.23 nm),suggesting enhanced amorphous character suitable for ionic mobility.Field emission scanning electron micrograph(FESEM)images of ZH5 displayed a homogeneous porousfiber-like morphology,while excess honey beyond 25 wt.%led to agglomeration and phase separation.Thermal analysis demonstrated improved thermal stability for ZH5,with a higher decomposition temperature and greater residual mass.Differential scanning calorimetry(DSC)results showed a single glass transition temperature(Tg)for ZH5 at 88.4℃,indicating good miscibility between honey and zein materials.These findings identify 25 wt.%honey as the optimal concentration for plasticization,modifying zein’s structure and enhancing its amorphous nature and thermal resilience.The results highlight the potential of honey as a sustainable and multifunctional plasticizer for the development of biodegradable and eco-friendly polymer electrolyte systems.展开更多
Harrat Lunayyir,a volcanic field in western Saudi Arabia,exhibits diverse geomorphological and topographical features shaped by volcanic,tectonic,and climatic processes.This study integrates field observations,remote ...Harrat Lunayyir,a volcanic field in western Saudi Arabia,exhibits diverse geomorphological and topographical features shaped by volcanic,tectonic,and climatic processes.This study integrates field observations,remote sensing,and GIS analysis to investigate the spatial distribution and relationships between volcanic landforms,lava flows,and topographical variation result obtained is a morphological classification of the cinder cones of Harrat Lunayyir,which can be sub-divided into four types:tephra rings,horseshoe-shaped volcanoes,multiple volcanoes and volcanoes without craters.All of these are monogenetic volcanoes,unlike central volcanoes(stratovolcanoes)which live for tens or hundreds of thousands of years and erupt numerous times.In Harrat Lunayyir,there is a clear dominance of arched horseshoe-shaped volcanoes(58)over ring-shaped cinder cones(10),A1_symmetric cones(circular,uniform cinder cones with a single crater)(32),A2_asymmetric cones(elongated,irregular cones and may feature one or more craters)(8),volcanoes without craters(55)and multiple volcanoes(20).The classification presented in this paper makes it possible to include all morphological types of volcanoes found in the region.This fact also renders the present classification a useful tool to apply in other,both insular and continental volcanic areas to eventually analyze and systematize the study of eruptive edifices with similar traits.Hence,this research will explore the standard physical volcanology literature so as to follow accepted definitions.展开更多
This is a correction to:Isabela R R Moraes,Mariana Antunes,Laura S Lopez-Greco,Fernando Jose Zara,Antonio Leao Castilho,Functional reproductive morphology of the snapping shrimp genus Synalpheus Spence Bate,1888(Decap...This is a correction to:Isabela R R Moraes,Mariana Antunes,Laura S Lopez-Greco,Fernando Jose Zara,Antonio Leao Castilho,Functional reproductive morphology of the snapping shrimp genus Synalpheus Spence Bate,1888(Decapoda,Alpheidae),Current Zoology,2024,71,338-352;https:/doi.org/10.1093/cz/zoae053.展开更多
Morphology,the study of shapes or forms,when applied to tourism,emphasizes the multifarious spatial practices between morphological elements and tourism activities.However,existing literature on morphology in the cont...Morphology,the study of shapes or forms,when applied to tourism,emphasizes the multifarious spatial practices between morphological elements and tourism activities.However,existing literature on morphology in the context of tourism usually only focuses on a single or a limited number of study areas,overlooking common or even universal patterns across various tourism destinations.To address this gap,we utilize geospatial big data and present a case study on the morphology of 406“AAAAA”-rated scenic areas in China.A framework based on“points”,“lines”,“planes”,and“solids”was designed to systematically organize and analyze morphological elements across scenic areas.The findings provide valuable insights for tourism planning and development,such as the co-occurrence of dense road networks and fragmented landscapes within scenic areas,as well as the resourcecontext-influenced(cultural or natural)associations between morphological features and tourism indicators.This research provides valuable strategic guidance for more effective and informed tourism development while acknowledging the trade-offs between generalizability and local specificity.展开更多
Cryptocaryon irritans is the parasite responsible for“white spot disease”in the yellowfin seabream Acanthopagrus latus,which has caused significant losses to the aquaculture industry.This experiment investigated the...Cryptocaryon irritans is the parasite responsible for“white spot disease”in the yellowfin seabream Acanthopagrus latus,which has caused significant losses to the aquaculture industry.This experiment investigated the changes in the morphology,transcriptome,and proteome of gill tissue in yellowfin seabream infected with C.irritans,aiming to provide foundational data for further understanding the pathogenic mechanisms and control measures against this parasite.The main findings were as follows,after C.irritans infection,the structure of gill tissue in yellowfin seabream was damaged,with microvessels ruptured,some cells proliferating,and large amounts of mucus infiltrating.Transcriptome analysis revealed a total of 4299 differentially expressed genes,with 2367 up-regulated and 1932down-regulated.Further bioinformatics analysis of all differentially expressed genes identified nine immune-related genes,cox-2,mcama,tbx21,dcn,tnfb,cd74a,illb,ppib,and cd4-1 in A.latus.The reliability of the transcriptome data was validated by real time q PCR,which showed the same trend as the RNA-seq results.Proteome analysis found365 differential proteins,with 180 proteins up-regulated and 185 proteins down-regulated.Bioinformatics analysis identified three immune-related proteins,Myll,Gapdh,and Actn3b.These findings indicated that C.irritans disrupted the structure of gill tissue,impeded gas exchange and led to asphyxiation and death in affected fish.Transcriptome and proteome analyses showed that the expression of immune-related genes and proteins in yellowfin seabream,involved not only inflammatory responses and the activation and migration of immune cells but also potentially participated in tissue repair and defense regulation.These findings highlighted the complex immune regulatory network in response to C.irritans infection,offering references for prevention and control of white spot disease in yellowfin seabream.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52422408 and 52171031)the Liaoning Xingliao Talents-Top-notch Young Talents Project(No.XLYC2203064)+1 种基金the Excellent Youth Fund of Liaoning Natural Science Foundation(No.2023JH3/10200001)the Fundamental Research Funds for the Central Universities(No.N2425004).
文摘The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.
基金support from Natural Science Foundation of Shandong Province(ZR2022MB049,ZR2021MB104)the National Natural Science Foundation of China(22078174).
文摘CdS photocatalysts have broad application prospects in environmental purification,energy conversion,and organic synthesis.However,their practical use is often hindered by the rapid recombination of photo-generated electron-hole pairs,which limits their efficiency on various reactions.Controlling morphological structures and crystal facets engineering are effective methods to enhance the photocatalytic performance of CdS.In this work,two different forms of CdS photocatalysts were synthesized by a hydrothermal method,namely nanoflower-shaped (CdS-NF) and nanorod-shaped (CdS-NR) for hydrogen peroxide (H_(2)O_(2)) production.The exposed crystal planes of CdS-NF are mainly (0 0 2) planes,while the accesible crystal planes of CdS-NR are notablly (1 0 1) planes.Notably,the photocatalytic hydrogen peroxide production yield of CdS-NR was high at 1225.13 μmol·h^(−1)·g^(−1),which is 1.78 times higher than the H_(2)O_(2) generation rate of CdS-NF.Moreover,through free radical capture experiments and DFT calculations,the reaction pathway was further explored.Both different configurations of cadmium sulfide based photocatalysts conform to the reaction mechanism of oxygen reduction as the main and water oxidation as the auxiliary.
基金supported by the National Natural Science Foundation of China(Grant Nos.32170642 and 32370682)。
文摘Avian cognitive abilities rival those of primates.These capacities have been linked to high pallial neuronal density and prefrontal cortex-like dorsal ventricular ridge(DVR)circuitry.Although the DVR is now recognized as a pallial structure homologous to the mammalian cortex,its morphological basis remains unclear.Here,we combine Nissl staining,Golgi-Cox labeling,and 3D reconstruction to map neuronal morphology across five telencephalic regions in the Rock Pigeon(Columba livia).From 64 fully reconstructed neurons,we quantified dendritic field area,total dendritic length,branching architecture,and radial arbor organization.DVR neurons showed the largest dendritic fields and the highest branching complexity.Single-nucleus transcriptomic data further revealed that the Nidopallium Caudolaterale(NCL),the core DVR subregion,expresses a neuronmorphogenesis gene module whose activity correlates with dendritic field size.Together,these results identify a molecular and morphological signature of DVR neurons and highlight the computational significance of Nidopallium Caudolaterale.This work provides an integrated comparison of telencephalic neuronal morphology and gene expression in birds.
基金Supported by Hunan Provincial Natural Science Foundation(Grant Nos.2023JJ60182 and 2025JJ50273)Scientific Research Fund of Hunan Provincial Education Department(Grant Nos.22B0561 and 23C0188)National Natural Science Foundation of China(Grant No.52305465).
文摘While microwave(MW)discharge technology has been developed to address the challenges inherent in shar-pening metal-bonded diamond grinding wheels(MD-GW),the surface morphology and grinding performance characteristics of wheels processed through this method remain insufficiently characterized and warrant further investigation.This study employed an in-situ experimental setup to analyze MD-GW sharpened through MW discharge,with a focus on abrasive damage,grit protrusion height and uniformity,the number of effective abrasives,chip space,and bond morphology.The grinding performance of MW-sharpened MD-GW was assessed based on dynamic grinding ratios and surface quality in zirconia grinding experiments,using mechanical sharpening as the comparison group.The results revealed that MW sharpening enhanced abrasive integrity when compared to mechanical methods,albeit with minor graphitization and localized oxidative damage occurring.Furthermore,after being sharpened by the MW method,the grit protrusion height increased,demonstrating good uniformity,and simultaneously exhibiting a higher number of effective abrasives.Noticeable craters formed in proximity to the abrasives,augmenting chip space,but sputtering led to the formation of metal deposition layers on the abrasive surfaces.The MW-sharpened wheel exhibited superior grinding wear ratios,with dynamic grinding ratios initially increasing and subsequently decreasing as the grinding process pro-gressed.These enhancements in surface morphology allowed the MW-sharpened MD-GW to remove zirconia ceramics in a ductile manner,resulting in improved grinding surface quality.The importance of this study lies in the development of an innovative sharpening technique that improved the surface morphology quality of MD-GW,with potential ramifications for enhancing the efficiency and quality of grinding difficult-to-machine materials.
基金supported by National Natural Science Foundation of China(Grant Nos.52305440,52204263)Natural Science Foundation of Changsha City(Grant Nos.kq2208272,kq2208274)+1 种基金Tribology Science Fund of the State Key Laboratory of Tribology in Advanced Equipment(Grant SKLTKF22B09)National Key Research and Development Program of China(2022YFB3706902).
文摘Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessitating the extensive use of in-situ monitoring to enable real-time adjustments of process parameters by detecting molten-pool features.To address the challenge of accurately extracting the molten-pool morphology from an undetached spatter,an innovative monitoring method based on the U-Net(U-shaped network)is proposed herein.A lightweight architecture accelerates the processing speed,whereas an enhanced loss function incorporating weight maps augments the segmentation precision.The model performance is evaluated by comparing its segmentation accuracy and processing speed with those of the conventional U-Net,using the mean intersection over union(MIoU)as the segmentation metric.The improved model demonstrates superior segmentation accuracy at the interface between the molten pool and spatter,with a peak MIoU of 0.9798 achieved on the test set.Furthermore,this model processes each image in an extremely short time of 17.9 ms.Using this segmentation algorithm,the error in extracting the molten-pool width from single-track experiments is within 0.1 mm.The proposed method for monitoring the molten-pool morphology is suitable for deployment in online monitoring systems,thus providing a foundation for subsequent process-parameter regulation.
基金funded by the National Science Centre,Poland,on the basis of the decision number UMO-2020/37/B/ST8/02097supported by the program“Excellence Initiative-Research University”for the AGH University of Krakow(IDUB AGH,No.501.696.7996,Action 4,ID 9880).
文摘Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structural studies of other physicochemical properties are con-ducted on a series of materials obtained by the sol-gel method with different ratios of Gd and Sm cations.It is documented that changing the x value,and the resulting adjustment of the average ionic radius,have a significant impact on the crystal structure,stability,as well as on the total conductivity and thermomechanical properties of the materials,with the best results obtained for the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)composition.Oxygen electrodes are prepared using the selected compound,allowing to obtain low polarization resistance values,such as 0.086Ω·cm^(2)at 800℃.Systematic studies of electrocatalytic activity are conducted using La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(_(0.2))O_(3−δ)as the electrolyte for all electrodes,and Ce_(0.8)Gd_(0.2)O_(2−δ)electrolyte for the best performing Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes.The electrochemical data are analyzed using the distribution of relaxation times method.Also,the influence of the preparation method of the electrode material is in-ve`stigated using the electrospinning technique.Finally,the performance of the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes is tested in a Ni-YSZ(yttria-stabilized zirconia)anode-supported cell with a Ce_(0.8)Gd_(0.2)O_(2−δ)buffer layer,in the fuel cell and electrolyzer operating modes.With the electrospun electrode,a power density of 462 mW·cm^(−2)is obtained at 700℃,with a current density of ca.0.2 A·cm^(−2)at 1.3 V for the electrolysis at the same temperature,indicating better performance compared to the sol-gel-based electrode.
基金funded by the National Natural Science F oundation of China(No.52172205)。
文摘Zinc oxide(ZnO)serves as a crucial functional semiconductor with a wide direct bandgap of approximately 3.37 eV.Solvothermal reaction is commonly used in the synthesis of ZnO micro/nanostructures,given its low cost,simplicity,and easy implementation.Moreover,ZnO morphology engineering has become desirable through the alteration of minor conditions in the reaction process,particularly at room temperature.In this work,ZnO micro/nanostructures were synthesized in a solution by varying the amounts of the ammonia added at low temperatures(including room temperature).The formation of Zn^(2+)complexes by ammonia in the precursor regulated the reaction rate of the morphology engineering of ZnO,which resulted in various structures,such as nanoparticles,nanosheets,microflowers,and single crystals.Finally,the obtained ZnO was used in the optoelectronic application of ultraviolet detectors.
基金National Natural Science Foundation of China,No.41906148,No.42271086Rejuvenating Yunnan Talents Support Plan Young Talent Program,No.XDYC-QNRC-2023-0322。
文摘A macro-tidal tropical estuary with high fluvial discharge is characterized by both fragility and remarkable dynamism.This study utilizes the Salween River Delta(SRD)as a case example to examine the interplay between morphology and vegetation under similar tidal conditions.Our analysis of correlations and inferences revealed several significant trends in the SRD:(1)an overall expansion of land area and intertidal vegetation,with the most pronounced changes occurring in the eastern sector;(2)the predominance of river discharge influencing the southwestern and northern sectors,contrasted with the primary impact of storm surges in the eastern sector;and(3)three distinct causal relationships among estuarine morphology,vegetation,storm surges,and river discharge:a direct model where river discharge shapes estuarine morphology,a progressive model in which river discharge affects vegetation distribution,subsequently influencing estuarine morphology,and a hybrid model where storm surges directly impact vegetation and indirectly modify its distribution through changes in estuarine morphology.The stability of sediment supply and the role of intertidal vegetation are crucial for the continuous seaward advance,providing a vital foundation for the protection and development of estuarine deltas.
基金financially supported by the Natural Science Foundation of Guangdong Province(No.2024A1515010639)PolyU Postdoc Matching Fund Scheme(No.1-W327),PolyU Grant(No.1-CE0H)+3 种基金Shenzhen Science and Technology Program(No.ZDSYS20220606100406016)Shenzhen Key Laboratory of Photonics and Biophotonics(No.ZDSYS20210623092006020)National Key Laboratory of Green and Long-Life Road Engineering in Extreme Environment(Shenzhen)(No.868-000003010103)National Natural Science Foundation of China(No.52208272)。
文摘Fueled by the increasing imperative for sustainable energy solutions and the burgeoning emphasis on health awareness,self-powered techniques have undergone notable strides in advancement.Triboelectric nanogenerators(TENGs)stand out as a prominent device capitalizing on the principles of triboelectrification and electrostatic induction to generate electricity or electrical signals.In efforts to augment the electrical output performance of TENGs and broaden their range of applications,researchers have endeavored to refine materials,surface morphology,and structural design.Among them,physical morphological modifications play a pivotal role in enhancing the electrical properties of TENGs by increasing the contact surface area,which can be achieved by building micro-/nano-structures on the surface or inside the friction material.In this review,we summarize the common morphologies of TENGs,categorize the morphologies into surface and internal structures,and elucidate their roles in enhancing the electric output performance of devices.Moreover,we systematically classify the methodologies employed for morphological preparation into physical and chemical approaches,thereby furnishing a comprehensive survey of the diverse techniques.Subsequently,typical applications of TENGs with special morphology divided by energy harvesting and self-powered sensors are presented.Finally,an overview of the challenges and future trajectories pertinent to TENGs is conducted.Through this endeavor,the aim of this article is to catalyze the evolution of further strategies for enhancing performance of TENGs.
基金supported by the National Key Research and Development Program of China,No.2021ZD0202503(to AHT)the National Natural Science Foundation of China,Nos.31872759(to AHT)and 32070707(to CF)+1 种基金Shenzhen Science and Technology Program,No.RCJC20210609104333007(to ZW)Shenzhen-Hong Kong Institute of Brain Science,Shenzhen Fundamental Research Institutions,No.2021SHIBS0002(to ZW).
文摘Morphological alterations in dendritic spines have been linked to changes in functional communication between neurons that affect learning and memory.Kinesin-4 KIF21A helps organize the microtubule-actin network at the cell cortex by interacting with KANK1;however,whether KIF21A modulates dendritic structure and function in neurons remains unknown.In this study,we found that KIF21A was distributed in a subset of dendritic spines,and that these KIF21A-positive spines were larger and more structurally plastic than KIF21A-negative spines.Furthermore,the interaction between KIF21A and KANK1 was found to be critical for dendritic spine morphogenesis and synaptic plasticity.Knockdown of either KIF21A or KANK1 inhibited dendritic spine morphogenesis and dendritic branching,and these deficits were fully rescued by coexpressing full-length KIF21A or KANK1,but not by proteins with mutations disrupting direct binding between KIF21A and KANK1 or binding between KANK1 and talin1.Knocking down KIF21A in the hippocampus of rats inhibited the amplitudes of long-term potentiation induced by high-frequency stimulation and negatively impacted the animals’cognitive abilities.Taken together,our findings demonstrate the function of KIF21A in modulating spine morphology and provide insight into its role in synaptic function.
文摘Introduction: the left atrial appendage, a dormant embryonic vestige, would play a major role in cardiac hemodynamic changes, volume homeostasis and thrombi formation. It, therefore constitutes a therapeutic target. Its morphology is extremely variable. Objective: it consisted on determining the morphological variations of the left auricle as well as their interest in the prevention of thrombi in the Senegalese. Material and Method: This study was conducted by dissecting 36 fresh hearts from Senegalese anatomical subjects with a sampling of the left atrial appendage, including specimens with normal morphological appearance. Their morphology was studied using the fresh and frozen plaster molding method. The data obtained were analyzed statistically. Results: the average age of the subjects was 33 years, with a sex ratio of 1.06, the cauliflower shape was dominant with 57% of cases and the cactus shape (4%) was less frequent. The cauliflower shape presented a clear angulation compared to the others without statistically significant differences according to age. Conclusion: This work showed a great morphological variability of the left atrial appendage. It can provide an update on the specificity of Senegalese. Taking these variations into account is important in the safe management of hemodynamic conditions and the improvement of the management of recurrent strokes.
基金supported by the National Natural Science Foundation of China(22376063,21976057)the Fund of the National Engineering Laboratory for Mobile Source Emission Control Technology(NELMS2020A05)Fundamental Research Funds for the Central Universities.
文摘The preferential oxidation of CO(CO-PROX)reaction is a cost-effective method for eliminating trace amounts of CO from the fuel H2.Pt-based catalysts have been extensively studied for COPROX,with their activity influenced by the morphology of the support.Hydrothermal synthesis was employed to produce different morphologies ofγ-Al_(2)O_(3):flower-likeγ-Al_(2)O_(3)(f)exposing(110)crystal faces,sheet-likeγ-Al_(2)O_(3)(s)revealing(100)crystal faces,and rod-likeγ-Al_(2)O_(3)(r)displaying(111)crystal faces,followed by loading PtCo nanoparticles.The exposed crystal faces of the support impact the alloying degree of the PtCo nanoparticles,and an increase in the alloying degree correlates with enhanced catalyst reactivity.Pt_(3)Co intermetallic compounds were identified onγ-Al_(2)O_(3)(f)exposing(110)crystal faces,and PtCo/γ-Al_(2)O_(3)(f)showed high catalytic activity in the CO-PROX reaction,achieving 100%CO conversion across a broad temperature range of 50−225°C.In contrast,only partial alloying of PtCo was observed onγ-Al_(2)O_(3)(s).Furthermore,no alloying between Pt and Co occurred in PtCo/γ-Al_(2)O_(3)(r),resulting in a reaction rate at 50°C that was merely 11%of that of PtCo/γ-Al_(2)O_(3)(f).The formation of Pt3Co intermetallic compounds led to a more oxidized state of Pt,which significantly diminished the adsorption of CO on Pt and augmented the active oxygen species,thereby facilitating the selective oxidation of CO.
基金supported in part by the National Natural Science Foundation of China under Grant 62303333in part by the Project of Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone under Grant HZQB-KCZYB-2020083.
文摘To achieve high power rating and low current harmonics of motor drive,this paper develops a dual three-phase open-winding permanent magnet synchronous motor(DTP-OW-PMSM)drive with the DC-link voltage ratio of 2:1:1.Based on this topology,this paper proposes a DTP four-level space vector pulse width modulation(DTP-FL SVPWM)strategy.First,two identical three-phase four-level space vector diagrams are constructed and divided.Then,three adjacent vectors nearest to the reference vector in each diagram are selected for the vector synthesis to guarantee high modulation precision and low switching frequency.Furthermore,to avoid the modulation error caused by the voltage deviation,the proposed DTP-FL SVPWM strategy is further optimized through unified duty ratio compensation(UDRC).The effectiveness of the proposed strategy is verified through experiments.
文摘The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.
基金supported by the Ministry of Higher Education(MoHE)of Malaysia through the Fundamental Research Grant Scheme(FRGS/1/2022/STG05/um/02/9).
文摘This study investigates the effects of honey concentration on the crystallinity,morphology,and thermal behavior of zein-based polymer systems,aiming to assess honey’s role as a natural plasticizer.Fourier transform infrared spectroscopy(FTIR)analysis confirmed the presence of strong intermolecular interactions and hydrogen bonding between zein and honey,indicating good miscibility.X-ray diffraction(XRD)patterns revealed a significant reduction in crystallinity with increasing honey concentration up to 25 wt.%,with the ZH5(75 wt.%zein-25 wt.%honey)sample exhibiting the smallest crystallite size(4.23 nm),suggesting enhanced amorphous character suitable for ionic mobility.Field emission scanning electron micrograph(FESEM)images of ZH5 displayed a homogeneous porousfiber-like morphology,while excess honey beyond 25 wt.%led to agglomeration and phase separation.Thermal analysis demonstrated improved thermal stability for ZH5,with a higher decomposition temperature and greater residual mass.Differential scanning calorimetry(DSC)results showed a single glass transition temperature(Tg)for ZH5 at 88.4℃,indicating good miscibility between honey and zein materials.These findings identify 25 wt.%honey as the optimal concentration for plasticization,modifying zein’s structure and enhancing its amorphous nature and thermal resilience.The results highlight the potential of honey as a sustainable and multifunctional plasticizer for the development of biodegradable and eco-friendly polymer electrolyte systems.
文摘Harrat Lunayyir,a volcanic field in western Saudi Arabia,exhibits diverse geomorphological and topographical features shaped by volcanic,tectonic,and climatic processes.This study integrates field observations,remote sensing,and GIS analysis to investigate the spatial distribution and relationships between volcanic landforms,lava flows,and topographical variation result obtained is a morphological classification of the cinder cones of Harrat Lunayyir,which can be sub-divided into four types:tephra rings,horseshoe-shaped volcanoes,multiple volcanoes and volcanoes without craters.All of these are monogenetic volcanoes,unlike central volcanoes(stratovolcanoes)which live for tens or hundreds of thousands of years and erupt numerous times.In Harrat Lunayyir,there is a clear dominance of arched horseshoe-shaped volcanoes(58)over ring-shaped cinder cones(10),A1_symmetric cones(circular,uniform cinder cones with a single crater)(32),A2_asymmetric cones(elongated,irregular cones and may feature one or more craters)(8),volcanoes without craters(55)and multiple volcanoes(20).The classification presented in this paper makes it possible to include all morphological types of volcanoes found in the region.This fact also renders the present classification a useful tool to apply in other,both insular and continental volcanic areas to eventually analyze and systematize the study of eruptive edifices with similar traits.Hence,this research will explore the standard physical volcanology literature so as to follow accepted definitions.
文摘This is a correction to:Isabela R R Moraes,Mariana Antunes,Laura S Lopez-Greco,Fernando Jose Zara,Antonio Leao Castilho,Functional reproductive morphology of the snapping shrimp genus Synalpheus Spence Bate,1888(Decapoda,Alpheidae),Current Zoology,2024,71,338-352;https:/doi.org/10.1093/cz/zoae053.
基金Yunnan Provincial Science and Technology Project at Southwest United Graduate School,No.202302AO370012National Natural Science Foundation of China,No.42401510Postdoctoral Fellowship Program of CPSF,No.GZC20240017。
文摘Morphology,the study of shapes or forms,when applied to tourism,emphasizes the multifarious spatial practices between morphological elements and tourism activities.However,existing literature on morphology in the context of tourism usually only focuses on a single or a limited number of study areas,overlooking common or even universal patterns across various tourism destinations.To address this gap,we utilize geospatial big data and present a case study on the morphology of 406“AAAAA”-rated scenic areas in China.A framework based on“points”,“lines”,“planes”,and“solids”was designed to systematically organize and analyze morphological elements across scenic areas.The findings provide valuable insights for tourism planning and development,such as the co-occurrence of dense road networks and fragmented landscapes within scenic areas,as well as the resourcecontext-influenced(cultural or natural)associations between morphological features and tourism indicators.This research provides valuable strategic guidance for more effective and informed tourism development while acknowledging the trade-offs between generalizability and local specificity.
基金Fujian Province Science and Technology Plan Project under contract No.2023N0011Xiamen Municipal Bureau of Marine Development Project under contract No.S24258。
文摘Cryptocaryon irritans is the parasite responsible for“white spot disease”in the yellowfin seabream Acanthopagrus latus,which has caused significant losses to the aquaculture industry.This experiment investigated the changes in the morphology,transcriptome,and proteome of gill tissue in yellowfin seabream infected with C.irritans,aiming to provide foundational data for further understanding the pathogenic mechanisms and control measures against this parasite.The main findings were as follows,after C.irritans infection,the structure of gill tissue in yellowfin seabream was damaged,with microvessels ruptured,some cells proliferating,and large amounts of mucus infiltrating.Transcriptome analysis revealed a total of 4299 differentially expressed genes,with 2367 up-regulated and 1932down-regulated.Further bioinformatics analysis of all differentially expressed genes identified nine immune-related genes,cox-2,mcama,tbx21,dcn,tnfb,cd74a,illb,ppib,and cd4-1 in A.latus.The reliability of the transcriptome data was validated by real time q PCR,which showed the same trend as the RNA-seq results.Proteome analysis found365 differential proteins,with 180 proteins up-regulated and 185 proteins down-regulated.Bioinformatics analysis identified three immune-related proteins,Myll,Gapdh,and Actn3b.These findings indicated that C.irritans disrupted the structure of gill tissue,impeded gas exchange and led to asphyxiation and death in affected fish.Transcriptome and proteome analyses showed that the expression of immune-related genes and proteins in yellowfin seabream,involved not only inflammatory responses and the activation and migration of immune cells but also potentially participated in tissue repair and defense regulation.These findings highlighted the complex immune regulatory network in response to C.irritans infection,offering references for prevention and control of white spot disease in yellowfin seabream.
