With a geometrical model of porous material, a 3D finite-element analysis on the rolling process of spring steel60Si2Mn in the semi-solid state is carried out using software MARC. In terms of flat and groove rolling c...With a geometrical model of porous material, a 3D finite-element analysis on the rolling process of spring steel60Si2Mn in the semi-solid state is carried out using software MARC. In terms of flat and groove rolling conditions,stress field and strain field are studied. The simulation results show that the rigid-viscoplastic model can accuratelydescribe the semi-solid metal rolling process. Semi-solid slurry has the characteristics of low flow stress and goodfluidity. During groove rolling, distribution of stress and strain on the cross-section of deformation zone is moreuniform than that during flat rolling. The results of simulation are in good agreement with the experiment data, andshow that semi-solid material fits for groove rolling.展开更多
A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D F...A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.展开更多
In a full-arch implant rehabilitation ad modum Branemark, the distribution of stress and strain in mandibular bone is influenced by the type, number and position of implants used. In particular, the biomechanical beha...In a full-arch implant rehabilitation ad modum Branemark, the distribution of stress and strain in mandibular bone is influenced by the type, number and position of implants used. In particular, the biomechanical behaviour of the bone structure after complete osseointegration depends on the load transferred to the bone by each fixture. In this study, a finite-element analysis of two models was performed. Models of an all-on-four configuration and a six-implant configuration were compared in a worst-case scenario. A new V parameter is presented to aid the quantitative and comparative analysis of the all-on-four and six-implant configurations. The influence of orthotropy was also investigated, and a geometric change in the all-on-four configuration is presented.展开更多
To investigate the strong random nature of the geometric interfaces between soil and rock, a rock-soil slope is considered as a two-phase random medium. A nonlinear translation of a Gaussian field is utilized to simul...To investigate the strong random nature of the geometric interfaces between soil and rock, a rock-soil slope is considered as a two-phase random medium. A nonlinear translation of a Gaussian field is utilized to simulate the two-phase random media, such that the soil(or rock) volume fraction and the inclination of the soil layer can be examined. The finite element method with random media incorporated as the material properties is used to determine the factor of safety of the rock-soil slope. Monte-Carlo simulations are used to estimate the statistical characteristics of the factor of safety. The failure mode of the rock-soil slope is examined by observing the maximum principal plastic strain at incipient slope failure. It is found that the critical surface of a rock-soil slope is fairly irregular, and it significantly differs from that of a pure soil slope. The factor of safety is sensitive to the soil volume faction, but it is predictable. The average factor of safety could be well predicted by the weighted harmonic average between the strength of soil and rock; the prediction model is practical and simple. Parametric studies on the inclination of the soil layer demonstrate that the most instable scenario occurs when the slope angle is consistent with the inclination of the soil layer.展开更多
A novel magnetic-controlled switcher type fault current limiter (FCL) based on the topology of the saturated iron core high temperature superconducting FCL is proposed. The magnetic field distribution of the FCL iron ...A novel magnetic-controlled switcher type fault current limiter (FCL) based on the topology of the saturated iron core high temperature superconducting FCL is proposed. The magnetic field distribution of the FCL iron core is analyzed by FEA software ANSYS. The current limiting characteristic is investigated by both 3-D field-circuit coupled simulation and Matlab. The experiments on the 220 V/50 A test model show that the FCL can limit the fault current swiftly and effectively,and the FCL has the advantages of simple and reliable structure, flexible control strategy. The simulation and experimental results prove that the theoretical expectation and current limiting performance is satisfactory for practical use.展开更多
Basic assumptions are proposed for the continuity model of a tubular hollow slab combined with continuity analysis and calculation of a finite-element model;the continuity Equation of a tubular hollow slab at the mino...Basic assumptions are proposed for the continuity model of a tubular hollow slab combined with continuity analysis and calculation of a finite-element model;the continuity Equation of a tubular hollow slab at the minor axis supported at two ends of the hollow axle under a vertical even load is determined and solved. The overall equivalent flexural rigidity is then determined, which provides important conditions for the continuity analysis of tubular hollow floor supported along four sides.展开更多
Background:The reverse obliquity inter-trochanteric fracture is a distinct fracture pattern that is mechanically different from most inter-trochanteric fractures and the optional treatment of it is still controversial...Background:The reverse obliquity inter-trochanteric fracture is a distinct fracture pattern that is mechanically different from most inter-trochanteric fractures and the optional treatment of it is still controversial.The purpose of this study was to compare differences in the efficacy of a novel nail(medial support nail[MSN-II])and proximal femoral nail anti-rotation(PFNA-II)in the treatment of reverse obliquity inter-trochanteric fractures(Arbeitsgemeinschaft fur Osteosynthesfrogen/Orthopedic Trauma Association[AO/OTA]31-A3.1)using finite-element analysis.Methods:Modeling software was used to establish a three-dimensional model of MSN-II and PFNA-II and an A3.1 inter-trochanteric fracture model.Abaqus software was used to implement different force loads to compare finite-element biomechanical parameters such as the maximum stress in implant and the displacement of fracture site.Results:The femoral stress,implant stress and fracture site displacement of MSN-II was less than that of PFNA-II.The results indicated that the maximal femoral stress was 581 MPa for PFNA-II and 443 MPa for the MSN-II.The maximum stress values in the PFNA-II and MSN-II models were 291 and 241 MPa,respectively.The maximal displacements of the fracture site were 1.47 and 1.16 mm in the PFNA-II and MSN-II models,respectively.Conclusions:Compared with PFNA-II for inter-trochanteric fracture(AO/OTA 31-A3.1),MSN-II which was designed with a triangular stability structure can provide better biomechanical stability.The MSN-II may be a feasible option for the treatment of reverse obliquity inter-trochanteric fracture.展开更多
Composite structures often experience various types of defects and damages during manufacturing,assembly,and service.In order to effectively restore the strength of damaged structures without compromising their origin...Composite structures often experience various types of defects and damages during manufacturing,assembly,and service.In order to effectively restore the strength of damaged structures without compromising their original aerodynamic shape,adhesive repair is commonly employed.This paper investigates the tensile behavior of composite laminate.Initial tests include intact specimens,damaged specimens,and baseline scarf repair specimens.The load-carrying capacity and stiffness of the baseline repair specimens were both improved.Numerical analysis is developed based on the dimensions of the specimens.Numerical analysis modelwas established based on the dimensions of the specimens,employing continuum shell elements and cohesive elements to simulate the adhesive between the patch and the parent structure.The simulation results closely matched the experimental results,confirming the reliability of the simulation approach.Using this model as a basis,a parametric study is conducted on the patch repair parameters,including the scarf angle,the number of extra plies,and the overlapping width of extra plies.It is found that increasing the scarf angle and the overlap width of extra plies enhances the ultimate load capacity of the specimens,while increasing the number of extra plies improves the tensile stiffness.Subsequently,a scarf repair configuration with an angle of 1:50,an overlap width of 12.7 mm,and two extra plies is selected for the repair.Optimized scarf repair specimens are obtained and subjected to tensile testing.The results demonstrate that the optimized specimens exhibit excellent tensile performance,with an ultimate load reaching 93% of the intact specimens and a tensile stiffness in the linear range reaching 97% of the intact specimens.展开更多
A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the...A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the method of numerical analysis to investigate the boundary points in a series of sections which form the surface of the workspace. That is, to study such points that have the largest polar radius on a certain section in a system of polar coordinates according to conditions of constraint. The constraint conditions considered in the article include the maximum and minimum displacements of each dieblock, the maximum and minimum angles of oscillation in each hinge. By converting the constraint inequalities into constraint equations, the largest polar radius corresponding to every constraint condition can be evaluated and the minimum one is used to decide the boundary point. This algorithm greatly simplifies the computational process and can be used to analyze any section of the workspace. It provides a theoretical basis for the structural design of such a machine tool.展开更多
A long slope consisting of spatially random soils is a common geographical feature. This paper examined the necessity of three-dimensional(3 D) analysis when dealing with slope with full randomness in soil properties....A long slope consisting of spatially random soils is a common geographical feature. This paper examined the necessity of three-dimensional(3 D) analysis when dealing with slope with full randomness in soil properties. Although 3 D random finite element analysis can well reflect the spatial variability of soil properties, it is often time-consuming for probabilistic stability analysis. For this reason, we also examined the least advantageous(or most pessimistic) cross-section of the studied slope. The concept of"most pessimistic" refers to the minimal cross-sectional average of undrained shear strength. The selection of the most pessimistic section is achievable by simulating the undrained shear strength as a 3 D random field. Random finite element analysis results suggest that two-dimensional(2 D) plane strain analysis based the most pessimistic cross-section generally provides a more conservative result than the corresponding full 3 D analysis. The level of conservativeness is around 15% on average. This result may have engineering implications for slope design where computationally tractable 2 D analyses based on the procedure proposed in this study could ensure conservative results.展开更多
Metamaterials have been receiving an increasing amount of interest in recent years. As a type of metamaterial, pentamode materials (PMs) approximate the elastic properties of liquids. In this study, a finite-element a...Metamaterials have been receiving an increasing amount of interest in recent years. As a type of metamaterial, pentamode materials (PMs) approximate the elastic properties of liquids. In this study, a finite-element analysis was conducted to predict the mechanical properties of PM structures by altering the thin wall thicknesses and layer numbers to obtain an outstanding load-bearing capacity. It was found that as the thin wall thickness increased from 0.15 to 0.45 mm, the compressive modulus of the PM structures increased and the Poisson’s ratio decreased. As the layer number increased, the Poisson’s ratio of the PM structures increased rapidly and reaches a stable value ranging from 0.50 to 0.55. Simulation results of the stress distribution in the PM structures confirmed that stress concentrations exist at the junctions of the thin walls and weights. For validation, Ti–6Al–4V specimens were fabricated by selective laser melting (SLM), and the mechanical properties of these specimens (i.e., Poisson’s ratio and elastic modulus) were experimentally studied. Good consistency was achieved between the numerical and experimental results. This work is beneficial for the design and development of PM structures with simultaneous load-bearing capacity and pentamodal properties.展开更多
The distribution of stress and strain between adjacent particles in particulate reinforced metal matrix composites wasinvestigated using cohesive zone models. It is found that the strain of the composite is concentrat...The distribution of stress and strain between adjacent particles in particulate reinforced metal matrix composites wasinvestigated using cohesive zone models. It is found that the strain of the composite is concentrated in the matrix, and there is aregion with higher strain along the loading path, which can promote the formation of a void near the particles pole. The stress andstrain in matrix near the particles gradually decrease with the increase of the distance between particles. And it is calculated that thereis a critical distance within which the stress and strain fields of the neighboring particles can influence with each other. This criticaldistance increases with the increase of particle size. It is also found that the angle between the tensile direction and the center line ofparticles plays an important role in the stress and strain distribution. The model with the angle of 0° has the greatest influence on thedistribution of stress and strain in the matrix, while the model with the angle of 45° has the least influence on the distribution of stressand strain in the matrix.展开更多
The effect of various process variables on the law of metal flow for semi-solid rolling 60Si2Mn was studied by finite element method. Semi-solid 60Si2Mn can be described as compressible rigid visco-plastic porous mate...The effect of various process variables on the law of metal flow for semi-solid rolling 60Si2Mn was studied by finite element method. Semi-solid 60Si2Mn can be described as compressible rigid visco-plastic porous material saturated with liquid. In terms of ther-mo-mechanical coupling condition, the distributions of stress, velocity and temperature were studied using software MARC. The simulation results show that the rigid visco-plastic model can accurately describe the semi-solid 60Si2Mn rolling process. The great deformation can achieve completely in view of low flow stress of semi-solid slurry.展开更多
Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger ...Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger nonlinear effects that enable pumping and mixing of fluids,and moving particles without contact.However,the transition from signal processing to actuators comes with a range of challenges concerning power density and spatial resolution that have spurred exciting developments in solid-state acoustics and especially in IDT design.Assuming some familiarity with acoustofluidics,this paper aims to provide a tutorial for IDT design and characterization for the purpose of acoustofluidic actuation.It is targeted at a diverse audience of researchers in various fields,including fluid mechanics,acoustics,and microelectronics.展开更多
Due to their excellent efficiency,power density and constant power speed region,interior permanent-magnet(IPM)machines are very suitable for electric vehicles(EVs).This paper proposed a new IPM rotor topology,which ca...Due to their excellent efficiency,power density and constant power speed region,interior permanent-magnet(IPM)machines are very suitable for electric vehicles(EVs).This paper proposed a new IPM rotor topology,which can offer high reluctance torque,wide constant power speed range and excellent overload capability.Besides,five rotor topologies with integral-slot distributed-windings IPM machines,including four existing IPM topologies and the proposed IPM topology,are designed optimally.Their characteristics,which include d-q axis inductances,saliency ratios,electromagnetic torques,corresponding torque ripples,back-electromotive forces(EMFs),overload capabilities and flux weakening performances are evaluated quantitatively.Finally,a three phase 48s8p hybrid rotor PM machine is built to verify the performances of the proposed IPM machine.This work provides some general concepts for machine developers who are willing to build IPM machines for high-performance EV applications.展开更多
The horizontal bearing behavior of a single batter pile(SBP)is vital to its application in practical engineering;however,the horizontal responses of SBPs change with the directions of horizontal loads,and this phenome...The horizontal bearing behavior of a single batter pile(SBP)is vital to its application in practical engineering;however,the horizontal responses of SBPs change with the directions of horizontal loads,and this phenomenon is rarely investigated.Therefore,the directional differences in the horizontal bearing behaviors of SBPs are investigated in this study.Four model tests are conducted to preliminarily examine the effects of the skew angle of horizontal loads on the horizontal bearing capacities and distributions of the bending moments of the SBPs.Subsequently,the differences in the responses of the SBPs under horizontal loads in various directions at full scale are analyzed comprehensively via finite-element(FE)analysis.The effects of the skew angle on SBP-soil interaction are discussed.Moreover,an empirical design method is proposed based on the FE analysis results to predict the bearing ratios of SBPs in medium-dense and dense sand while considering the effects of the skew angle,batter angle,and pile diameter.The method is confirmed to be effective,as confirmed by the close agreement between the predicting results with the model test(reported in this study)and centrifuge model test results(reported in the literature).展开更多
Shear failure in panel zones and plastic hinges in steel beams are the two major failure modes of connections between concrete-filled steel tubular(CFST) columns and steel beams. To investigate the behavior of this ty...Shear failure in panel zones and plastic hinges in steel beams are the two major failure modes of connections between concrete-filled steel tubular(CFST) columns and steel beams. To investigate the behavior of this type of connection in both modes,two through-diaphragm connections were tested under cyclic and monotonic loadings and the load-carrying capacity,ductility,and strength of degradation of connections were discussed. Using ABAQUS software,we developed nonlinear finite-element models(FEMs) to simulate the load-carrying capacity and failure modes of the connections under monotonic loading. The finite-element(FE) analysis and test results showed reasonable agreement for the through-diaphragm connections,which confirms the accuracy of FEMs in predicting the load-carrying capacity and failure modes of connections. Based on the validated FEM,a parametric study was then conducted to investigate the infl uence of the thicknesses of the tube and diaphragm on the load-carrying capacity and failure modes of these connections. The results indicate that the strength,stiff ness,and load-carrying capacity are infl uenced less by the thickness of the diaphragm,and more by the thickness of the steel tube. According to the FE analysis results,it can be found that the critical condition between the two failure modes is determined by the shear resistance and bending resistance.展开更多
Carotid artery stenting presents challenges of in-stent restenosis and late thrombosis, which are caused primarily by alterations in the mechanical environment of the artery after stent implantation. The present study...Carotid artery stenting presents challenges of in-stent restenosis and late thrombosis, which are caused primarily by alterations in the mechanical environment of the artery after stent implantation. The present study constructed patient-specific carotid arterial bifurcation models with lipid pools and calcified components based on magnetic resonance imaging. We numerically analyzed the effects of multicomponent plaques on the distributions of von Mises stresses (VMSs) in the patient-specific models after stenting. The results showed that when a stent was deployed, the large soft lipid pool in atherosclerotic plaques cushioned the host artery and reduced the stress within the arterial wall; however, this resulted in a sharp increase of VMS in the fibrous cap. When compared with the lipid pool, the presence of the calcified components led to slightly increased stresses on the luminal surface. However, when a calcification was located close to the luminal surface of the host artery and the stenosis, the local VMS was elevated. Overall, compared with calcified components, large lipid pools severely damaged the host artery after stenting. Furthermore, damage due to the calcified component may depend on location.展开更多
A numerical model of 2.5D non-isothermal resin transfer molding simulation is developed for thin part based on the control volume/finite element method. The non-uniform temperature distribution and the heat generation...A numerical model of 2.5D non-isothermal resin transfer molding simulation is developed for thin part based on the control volume/finite element method. The non-uniform temperature distribution and the heat generation during the filling stage are modeled with the lumped temperature system and the species balance. Numerical algorithm of the simulation are studied. The molding simulation for a part is performed to show the effectiveness of simulating filling time, temperature distribution and curing degree.展开更多
Regarding quality inspection of technologically important nanocomposite hard coatings based on Ti,B,Si,C,and N and bioceramics such as hydroxyapatite that are used in small-scale high-precision devices and bio-implant...Regarding quality inspection of technologically important nanocomposite hard coatings based on Ti,B,Si,C,and N and bioceramics such as hydroxyapatite that are used in small-scale high-precision devices and bio-implants,it is essential to study the failure mechanisms associated with nanoindentation,such as fracture,delamination,and chipping.The stress imposed by the indenter can affect the fracture morphology and the interfacial fracture energy,depending on indenter shape,substrate type,crystallographic properties,pre-existing flaws,internal microcracks,and pre-strain.Reported here are finite-element-based fracture studies that provide insights into the different cracking mechanisms related to the aforementioned failure process,showing that the fracture morphology is affected by the interaction of different cracking events.The interfacial fracture energy,toughness,and residual stress are calculated using existing models with minor adjustments,and it is found that increasing the indenter sharpness improves the shear stress distribution,making the coating more prone to separation.Depending on the prevailing type of stress,the stress distribution beneath the depression results in either crack formation or a dislocation pile-up leading to strain hardening.Different forms of resistances resulting from the indentation process are found to affect the tip–sample conduction,and because of its stronger induced plasticity than that of a Berkovich indenter tip,a sharper cube-corner tip produces more resistance.展开更多
基金This project is supported by the National Natural Science Foundation of China under grant No. 50174003 and No. 59995440.
文摘With a geometrical model of porous material, a 3D finite-element analysis on the rolling process of spring steel60Si2Mn in the semi-solid state is carried out using software MARC. In terms of flat and groove rolling conditions,stress field and strain field are studied. The simulation results show that the rigid-viscoplastic model can accuratelydescribe the semi-solid metal rolling process. Semi-solid slurry has the characteristics of low flow stress and goodfluidity. During groove rolling, distribution of stress and strain on the cross-section of deformation zone is moreuniform than that during flat rolling. The results of simulation are in good agreement with the experiment data, andshow that semi-solid material fits for groove rolling.
基金supported by the National Natural Science Foundation of China (51109029,51178081,51138001,and 51009020)the State Key Development Program for Basic Research of China (2013CB035905)
文摘A new finite element method （FEM） of B-spline wavelet on the interval （BSWI） is proposed. Through analyzing the scaling functions of BSWI in one dimension, the basic formula for 2D FEM of BSWI is deduced. The 2D FEM of 7 nodes and 10 nodes are constructed based on the basic formula. Using these proposed elements, the multiscale numerical model for foundation subjected to harmonic periodic load, the foundation model excited by external and internal dynamic load are studied. The results show the pro- posed finite elements have higher precision than the tradi- tional elements with 4 nodes. The proposed finite elements can describe the propagation of stress waves well whenever the foundation model excited by extemal or intemal dynamic load. The proposed finite elements can be also used to con- nect the multi-scale elements. And the proposed finite elements also have high precision to make multi-scale analysis for structure.
文摘In a full-arch implant rehabilitation ad modum Branemark, the distribution of stress and strain in mandibular bone is influenced by the type, number and position of implants used. In particular, the biomechanical behaviour of the bone structure after complete osseointegration depends on the load transferred to the bone by each fixture. In this study, a finite-element analysis of two models was performed. Models of an all-on-four configuration and a six-implant configuration were compared in a worst-case scenario. A new V parameter is presented to aid the quantitative and comparative analysis of the all-on-four and six-implant configurations. The influence of orthotropy was also investigated, and a geometric change in the all-on-four configuration is presented.
基金supported by the International Science and Technology Cooperation Programme of Hainan Province,China (Grant No.ZDYF2016226)the National Natural Science Foundation of China(Grant No.51879203)
文摘To investigate the strong random nature of the geometric interfaces between soil and rock, a rock-soil slope is considered as a two-phase random medium. A nonlinear translation of a Gaussian field is utilized to simulate the two-phase random media, such that the soil(or rock) volume fraction and the inclination of the soil layer can be examined. The finite element method with random media incorporated as the material properties is used to determine the factor of safety of the rock-soil slope. Monte-Carlo simulations are used to estimate the statistical characteristics of the factor of safety. The failure mode of the rock-soil slope is examined by observing the maximum principal plastic strain at incipient slope failure. It is found that the critical surface of a rock-soil slope is fairly irregular, and it significantly differs from that of a pure soil slope. The factor of safety is sensitive to the soil volume faction, but it is predictable. The average factor of safety could be well predicted by the weighted harmonic average between the strength of soil and rock; the prediction model is practical and simple. Parametric studies on the inclination of the soil layer demonstrate that the most instable scenario occurs when the slope angle is consistent with the inclination of the soil layer.
基金Major State Basic Research Development Program of China ( No.2005CB221505)Research Foundation for the Doctoral Programof Higher Education of China(No.20050248058)
文摘A novel magnetic-controlled switcher type fault current limiter (FCL) based on the topology of the saturated iron core high temperature superconducting FCL is proposed. The magnetic field distribution of the FCL iron core is analyzed by FEA software ANSYS. The current limiting characteristic is investigated by both 3-D field-circuit coupled simulation and Matlab. The experiments on the 220 V/50 A test model show that the FCL can limit the fault current swiftly and effectively,and the FCL has the advantages of simple and reliable structure, flexible control strategy. The simulation and experimental results prove that the theoretical expectation and current limiting performance is satisfactory for practical use.
文摘Basic assumptions are proposed for the continuity model of a tubular hollow slab combined with continuity analysis and calculation of a finite-element model;the continuity Equation of a tubular hollow slab at the minor axis supported at two ends of the hollow axle under a vertical even load is determined and solved. The overall equivalent flexural rigidity is then determined, which provides important conditions for the continuity analysis of tubular hollow floor supported along four sides.
基金This work was supported by a grant from the Capital Health Research and Development of Special Grants(No.2016-1-5012)。
文摘Background:The reverse obliquity inter-trochanteric fracture is a distinct fracture pattern that is mechanically different from most inter-trochanteric fractures and the optional treatment of it is still controversial.The purpose of this study was to compare differences in the efficacy of a novel nail(medial support nail[MSN-II])and proximal femoral nail anti-rotation(PFNA-II)in the treatment of reverse obliquity inter-trochanteric fractures(Arbeitsgemeinschaft fur Osteosynthesfrogen/Orthopedic Trauma Association[AO/OTA]31-A3.1)using finite-element analysis.Methods:Modeling software was used to establish a three-dimensional model of MSN-II and PFNA-II and an A3.1 inter-trochanteric fracture model.Abaqus software was used to implement different force loads to compare finite-element biomechanical parameters such as the maximum stress in implant and the displacement of fracture site.Results:The femoral stress,implant stress and fracture site displacement of MSN-II was less than that of PFNA-II.The results indicated that the maximal femoral stress was 581 MPa for PFNA-II and 443 MPa for the MSN-II.The maximum stress values in the PFNA-II and MSN-II models were 291 and 241 MPa,respectively.The maximal displacements of the fracture site were 1.47 and 1.16 mm in the PFNA-II and MSN-II models,respectively.Conclusions:Compared with PFNA-II for inter-trochanteric fracture(AO/OTA 31-A3.1),MSN-II which was designed with a triangular stability structure can provide better biomechanical stability.The MSN-II may be a feasible option for the treatment of reverse obliquity inter-trochanteric fracture.
文摘Composite structures often experience various types of defects and damages during manufacturing,assembly,and service.In order to effectively restore the strength of damaged structures without compromising their original aerodynamic shape,adhesive repair is commonly employed.This paper investigates the tensile behavior of composite laminate.Initial tests include intact specimens,damaged specimens,and baseline scarf repair specimens.The load-carrying capacity and stiffness of the baseline repair specimens were both improved.Numerical analysis is developed based on the dimensions of the specimens.Numerical analysis modelwas established based on the dimensions of the specimens,employing continuum shell elements and cohesive elements to simulate the adhesive between the patch and the parent structure.The simulation results closely matched the experimental results,confirming the reliability of the simulation approach.Using this model as a basis,a parametric study is conducted on the patch repair parameters,including the scarf angle,the number of extra plies,and the overlapping width of extra plies.It is found that increasing the scarf angle and the overlap width of extra plies enhances the ultimate load capacity of the specimens,while increasing the number of extra plies improves the tensile stiffness.Subsequently,a scarf repair configuration with an angle of 1:50,an overlap width of 12.7 mm,and two extra plies is selected for the repair.Optimized scarf repair specimens are obtained and subjected to tensile testing.The results demonstrate that the optimized specimens exhibit excellent tensile performance,with an ultimate load reaching 93% of the intact specimens and a tensile stiffness in the linear range reaching 97% of the intact specimens.
基金Ministerial Level Foundation(96J185 .1BQ0150) Fund for Reasearch on Doctoral Programs in Institutions of Higher Learning(1997000716)
文摘A new three dimensional simulation method is introduced to study the workspace of a 6 PSS (P denotes a prismatic kinematic pair, S denotes a spherical kinematic pair) parallel machine tool. This algorithm adopts the method of numerical analysis to investigate the boundary points in a series of sections which form the surface of the workspace. That is, to study such points that have the largest polar radius on a certain section in a system of polar coordinates according to conditions of constraint. The constraint conditions considered in the article include the maximum and minimum displacements of each dieblock, the maximum and minimum angles of oscillation in each hinge. By converting the constraint inequalities into constraint equations, the largest polar radius corresponding to every constraint condition can be evaluated and the minimum one is used to decide the boundary point. This algorithm greatly simplifies the computational process and can be used to analyze any section of the workspace. It provides a theoretical basis for the structural design of such a machine tool.
基金supported by the Key Research&Development Plan Science and Technology Cooperation Programme of Hainan Province,China(Grant No.ZDYF2016226)the National Natural Science Foundation of China(Grant Nos.51879203,51808421)
文摘A long slope consisting of spatially random soils is a common geographical feature. This paper examined the necessity of three-dimensional(3 D) analysis when dealing with slope with full randomness in soil properties. Although 3 D random finite element analysis can well reflect the spatial variability of soil properties, it is often time-consuming for probabilistic stability analysis. For this reason, we also examined the least advantageous(or most pessimistic) cross-section of the studied slope. The concept of"most pessimistic" refers to the minimal cross-sectional average of undrained shear strength. The selection of the most pessimistic section is achievable by simulating the undrained shear strength as a 3 D random field. Random finite element analysis results suggest that two-dimensional(2 D) plane strain analysis based the most pessimistic cross-section generally provides a more conservative result than the corresponding full 3 D analysis. The level of conservativeness is around 15% on average. This result may have engineering implications for slope design where computationally tractable 2 D analyses based on the procedure proposed in this study could ensure conservative results.
文摘Metamaterials have been receiving an increasing amount of interest in recent years. As a type of metamaterial, pentamode materials (PMs) approximate the elastic properties of liquids. In this study, a finite-element analysis was conducted to predict the mechanical properties of PM structures by altering the thin wall thicknesses and layer numbers to obtain an outstanding load-bearing capacity. It was found that as the thin wall thickness increased from 0.15 to 0.45 mm, the compressive modulus of the PM structures increased and the Poisson’s ratio decreased. As the layer number increased, the Poisson’s ratio of the PM structures increased rapidly and reaches a stable value ranging from 0.50 to 0.55. Simulation results of the stress distribution in the PM structures confirmed that stress concentrations exist at the junctions of the thin walls and weights. For validation, Ti–6Al–4V specimens were fabricated by selective laser melting (SLM), and the mechanical properties of these specimens (i.e., Poisson’s ratio and elastic modulus) were experimentally studied. Good consistency was achieved between the numerical and experimental results. This work is beneficial for the design and development of PM structures with simultaneous load-bearing capacity and pentamodal properties.
基金Project(51301068)supported by the National Natural Science Foundation of ChinaProject(E2014502003)supported by the Natural Science Foundation of Hebei Province,ChinaProject(2018MS120)supported by Fundamental Research Fund for the Central Universities,China
文摘The distribution of stress and strain between adjacent particles in particulate reinforced metal matrix composites wasinvestigated using cohesive zone models. It is found that the strain of the composite is concentrated in the matrix, and there is aregion with higher strain along the loading path, which can promote the formation of a void near the particles pole. The stress andstrain in matrix near the particles gradually decrease with the increase of the distance between particles. And it is calculated that thereis a critical distance within which the stress and strain fields of the neighboring particles can influence with each other. This criticaldistance increases with the increase of particle size. It is also found that the angle between the tensile direction and the center line ofparticles plays an important role in the stress and strain distribution. The model with the angle of 0° has the greatest influence on thedistribution of stress and strain in the matrix, while the model with the angle of 45° has the least influence on the distribution of stressand strain in the matrix.
基金the National Natural Science Foundation of China (No.59995440).
文摘The effect of various process variables on the law of metal flow for semi-solid rolling 60Si2Mn was studied by finite element method. Semi-solid 60Si2Mn can be described as compressible rigid visco-plastic porous material saturated with liquid. In terms of ther-mo-mechanical coupling condition, the distributions of stress, velocity and temperature were studied using software MARC. The simulation results show that the rigid visco-plastic model can accurately describe the semi-solid 60Si2Mn rolling process. The great deformation can achieve completely in view of low flow stress of semi-solid slurry.
基金This work was supported by the National Natural Science Foundation of China under Grant Nos.12004078 and 61874033the State Key Lab of ASIC and Systems,the Science and Technology Commission of Shanghai Municipality Award/Grant Nos.22QA1400900 and 22WZ2502200Fudan University 2021MS001,2021MS002 and 2020KF006.
文摘Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger nonlinear effects that enable pumping and mixing of fluids,and moving particles without contact.However,the transition from signal processing to actuators comes with a range of challenges concerning power density and spatial resolution that have spurred exciting developments in solid-state acoustics and especially in IDT design.Assuming some familiarity with acoustofluidics,this paper aims to provide a tutorial for IDT design and characterization for the purpose of acoustofluidic actuation.It is targeted at a diverse audience of researchers in various fields,including fluid mechanics,acoustics,and microelectronics.
基金This work was supported by the Key Research and Development Program of Jiangsu Province(BE2018107)by the Six Talent Peaks Project of Jiangsu Province(2017-KTHY-011)by the Graduate Scientific Research Innovation Project of Jiangsu Province(KYCX18_2248).
文摘Due to their excellent efficiency,power density and constant power speed region,interior permanent-magnet(IPM)machines are very suitable for electric vehicles(EVs).This paper proposed a new IPM rotor topology,which can offer high reluctance torque,wide constant power speed range and excellent overload capability.Besides,five rotor topologies with integral-slot distributed-windings IPM machines,including four existing IPM topologies and the proposed IPM topology,are designed optimally.Their characteristics,which include d-q axis inductances,saliency ratios,electromagnetic torques,corresponding torque ripples,back-electromotive forces(EMFs),overload capabilities and flux weakening performances are evaluated quantitatively.Finally,a three phase 48s8p hybrid rotor PM machine is built to verify the performances of the proposed IPM machine.This work provides some general concepts for machine developers who are willing to build IPM machines for high-performance EV applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.52178358,52108349,and 51779217)the Key Project of the Natural Science Foundation of Zhejiang Province(No.LXZ22E080001).
文摘The horizontal bearing behavior of a single batter pile(SBP)is vital to its application in practical engineering;however,the horizontal responses of SBPs change with the directions of horizontal loads,and this phenomenon is rarely investigated.Therefore,the directional differences in the horizontal bearing behaviors of SBPs are investigated in this study.Four model tests are conducted to preliminarily examine the effects of the skew angle of horizontal loads on the horizontal bearing capacities and distributions of the bending moments of the SBPs.Subsequently,the differences in the responses of the SBPs under horizontal loads in various directions at full scale are analyzed comprehensively via finite-element(FE)analysis.The effects of the skew angle on SBP-soil interaction are discussed.Moreover,an empirical design method is proposed based on the FE analysis results to predict the bearing ratios of SBPs in medium-dense and dense sand while considering the effects of the skew angle,batter angle,and pile diameter.The method is confirmed to be effective,as confirmed by the close agreement between the predicting results with the model test(reported in this study)and centrifuge model test results(reported in the literature).
基金supported by the National Natural Science Foundation of China (Nos. 51268054 and 51468061)the Natural Science Foundation of Tianjin, China (No. 13JCQNJC07300)
文摘Shear failure in panel zones and plastic hinges in steel beams are the two major failure modes of connections between concrete-filled steel tubular(CFST) columns and steel beams. To investigate the behavior of this type of connection in both modes,two through-diaphragm connections were tested under cyclic and monotonic loadings and the load-carrying capacity,ductility,and strength of degradation of connections were discussed. Using ABAQUS software,we developed nonlinear finite-element models(FEMs) to simulate the load-carrying capacity and failure modes of the connections under monotonic loading. The finite-element(FE) analysis and test results showed reasonable agreement for the through-diaphragm connections,which confirms the accuracy of FEMs in predicting the load-carrying capacity and failure modes of connections. Based on the validated FEM,a parametric study was then conducted to investigate the infl uence of the thicknesses of the tube and diaphragm on the load-carrying capacity and failure modes of these connections. The results indicate that the strength,stiff ness,and load-carrying capacity are infl uenced less by the thickness of the diaphragm,and more by the thickness of the steel tube. According to the FE analysis results,it can be found that the critical condition between the two failure modes is determined by the shear resistance and bending resistance.
基金supported by the National Natural Science Foundation of China (Grants 11332003, 11421202, 61190123, 31200703, 11472031)Special Fund for Excellent Doctoral Degree Dissertation of Beijing (Grant 20131000601)+1 种基金the 111 Project (Grant B13003)the Innovation Foundation of BUAA for Ph.D. graduates
文摘Carotid artery stenting presents challenges of in-stent restenosis and late thrombosis, which are caused primarily by alterations in the mechanical environment of the artery after stent implantation. The present study constructed patient-specific carotid arterial bifurcation models with lipid pools and calcified components based on magnetic resonance imaging. We numerically analyzed the effects of multicomponent plaques on the distributions of von Mises stresses (VMSs) in the patient-specific models after stenting. The results showed that when a stent was deployed, the large soft lipid pool in atherosclerotic plaques cushioned the host artery and reduced the stress within the arterial wall; however, this resulted in a sharp increase of VMS in the fibrous cap. When compared with the lipid pool, the presence of the calcified components led to slightly increased stresses on the luminal surface. However, when a calcification was located close to the luminal surface of the host artery and the stenosis, the local VMS was elevated. Overall, compared with calcified components, large lipid pools severely damaged the host artery after stenting. Furthermore, damage due to the calcified component may depend on location.
文摘A numerical model of 2.5D non-isothermal resin transfer molding simulation is developed for thin part based on the control volume/finite element method. The non-uniform temperature distribution and the heat generation during the filling stage are modeled with the lumped temperature system and the species balance. Numerical algorithm of the simulation are studied. The molding simulation for a part is performed to show the effectiveness of simulating filling time, temperature distribution and curing degree.
文摘Regarding quality inspection of technologically important nanocomposite hard coatings based on Ti,B,Si,C,and N and bioceramics such as hydroxyapatite that are used in small-scale high-precision devices and bio-implants,it is essential to study the failure mechanisms associated with nanoindentation,such as fracture,delamination,and chipping.The stress imposed by the indenter can affect the fracture morphology and the interfacial fracture energy,depending on indenter shape,substrate type,crystallographic properties,pre-existing flaws,internal microcracks,and pre-strain.Reported here are finite-element-based fracture studies that provide insights into the different cracking mechanisms related to the aforementioned failure process,showing that the fracture morphology is affected by the interaction of different cracking events.The interfacial fracture energy,toughness,and residual stress are calculated using existing models with minor adjustments,and it is found that increasing the indenter sharpness improves the shear stress distribution,making the coating more prone to separation.Depending on the prevailing type of stress,the stress distribution beneath the depression results in either crack formation or a dislocation pile-up leading to strain hardening.Different forms of resistances resulting from the indentation process are found to affect the tip–sample conduction,and because of its stronger induced plasticity than that of a Berkovich indenter tip,a sharper cube-corner tip produces more resistance.
