Introduction: Middle ear volume(MEV) is a clinically relevant parameter across middle ear diseases. MEV values between these techniques have never before been tested for agreement in ears with perforated tympanic memb...Introduction: Middle ear volume(MEV) is a clinically relevant parameter across middle ear diseases. MEV values between these techniques have never before been tested for agreement in ears with perforated tympanic membranes(TMs).Methods: Middle ears were identified from 36 patients ranging 18-89 years of age with TM perforations who underwent tympanometry and temporal bone computed tomography(CT) between 2005 and 2015. MEVs calculated by both tympanometry and three-dimensional volume reconstruction(3DVR) were analyzed for agreement using Bland Altman plots. The differences between tympanometric and 3DVR MEV values for each given middle ear were characterized across MEV quartiles(1= smallest; 4= largest) and across increasing states of middle ear disease using Kruskale Wallis and Wilcoxon testing with Bonferroni correction.Results: Bland Altman plots demonstrated significant disagreement between MEV measurement techniques. Differences between tympanometric(T) and 3DVR MEV values were significantly greater with increasing average(i.e.(Tt3DVR)/2)) MEV per linear regression(p < 0.0001). Significance was demonstrated between fourth and first average MEV quartiles(p= 0.0024), fourth and second quartiles(p= 0.0024), third and first quartiles(p= 0.0048), and third and second quartiles(p= 0.048). Absolute MEV difference was not significantly different across varying states of middle ear disease(p= 0.44).Conclusion: Statistically and clinically significant disagreement was demonstrated between tympanometric and 3DVR MEV values. Studies that vary in MEV estimation techniques may be expected to demonstrate significantly different results. These preliminary results suggest that clinicians should endeavor to seek further confirmation when interpreting high tympanometric MEV values.展开更多
Perihilar cholangiocarcinoma(pCCA)and intrahepatic cholangiocarcinoma(iCCA)are highly malignant neoplasms with a 5-year overall survival rate of approximately 30%[1,2].Surgical resection remains the only potentially c...Perihilar cholangiocarcinoma(pCCA)and intrahepatic cholangiocarcinoma(iCCA)are highly malignant neoplasms with a 5-year overall survival rate of approximately 30%[1,2].Surgical resection remains the only potentially curative treatment,yet only one-fifth of patients are eligible for resection at initial diagnosis[3].Threedimensional(3D)reconstruction technology provides precise preoperative visualization of complex hilar anatomy,significantly enhancing surgical planning and outcomes[4].Recent advances in 3D reconstruction technology have enhanced preoperative planning by providing precise anatomical mapping of tumor-vessel relationships and biliary variations[4,5].Therefore,this report describes a case of left iCCA successfully resected with biliary reconstruction guided by 3D visualization.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction t...BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.展开更多
Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems....Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems.Therefore,there is an urgent need to develop advanced tools to characterize the spatio-temporal variations of three-dimensional(3D)DO.To address this challenge,this study introduces the Light Gradient Boosting Machine(Light-GBM),combining satellite remote sensing and reanalysis data with Biogeochemical Argo data to accurately reconstruct the 3D DO structure in the Mediterranean Sea from 2010 to 2022.Various environmental parameters are incorporated as inputs,including spatiotemporal features,meteorological characteristics,and ocean color properties.The LightGBM model demonstrates excellent performance on the testing dataset with R^(2) of 0.958.The modeled DO agrees better with in-situ measurements than products from numerical models.Using the Shapley Additive exPlanations method,the contributions of input features are assessed.Sea surface temperatures provide a correlation with DO at the sea surface,while spatial coordinates supplement the view of the ocean interior.Based on the reconstructed 3D DO structure,we identify an oxygen minimum zone in the western Mediterranean that expands continuously,reaching depths of approximately 300–800 m.The western Mediterranean exhibits a significant declining trend.This study enhances marine environmental evidence by proposing a precise and cost-effective approach for reconstructing 3D DO,thereby offering insights into the dynamics of DO variations under changing climatic conditions.展开更多
Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstructi...Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstruction model,this study proposes a quantitative microstructure characterization method combining the roughness evaluation index and the 3D fractal dimension to study the change rule of the fracture surface morphology after blasting.This method was applied and validated in the study of the fracture microstructure of the rock after blasting.The results show that the fracture morphology characteristics of the 3D contour digital reconstruction model have good correlation with the changes of the blasting action.The undulation rate of the three-dimensional surface profile of the rock is more prone to dramatic rise and dramatic fall morphology.In terms of tilting trend,the tilting direction also shows gradual disorder,with the tilting angle increasing correspondingly.All the roughness evaluation indexes of the rock fissure surface after blasting show a linear and gradually increasing trend as the distance to the bursting center increases;the difference between the two-dimensional roughness evaluation indexes and the three-dimensional ones of the same micro-area rock samples also becomes increasingly larger,among which the three-dimensional fissure roughness coefficient JRC and the surface roughness ratio Rs display better correlation.Compared with the linear fitting formula of the power function relationship,the three-dimensional fractal dimension of the postblast fissure surface is fitted with the values of JRC and Rs,which renders higher correlation coefficients,and the degree of linear fitting of JRC to the three-dimensional fractal dimension is higher.The fractal characteristics of the blast-affected region form a unity with the three-dimensional roughness evaluation of the fissure surface.展开更多
To better understand the biological structure of bigeye tuna(Thunnus obesus),albacore tuna(Thunnus alalunga),and longtail tuna(Thunnus tonggol),computed tomography(CT)was used to scan their bodies,and the data are pro...To better understand the biological structure of bigeye tuna(Thunnus obesus),albacore tuna(Thunnus alalunga),and longtail tuna(Thunnus tonggol),computed tomography(CT)was used to scan their bodies,and the data are processed by Mimics software.The skeleton,swim bladder,and muscle of the three tuna species are reconstructed in three dimensions.The surface area and volume of the corresponding parts are measured.The results show that the surface areas of the skeleton of longtail tuna,bigeye tuna,albacore tuna accounted for 28.18%,37.34%,33.45%of their whole body surface areas respectively;the surface areas of swim bladder accounted for 0,2.06%,2.72% of their whole body surface area respectively;and the surface areas of muscle accounted for 71.82%,60.6%,63.83%of their whole body surface areas respectively.And the volumes of skeleton accounted for 28.18%,8.05%,3.84%,the volumes of swim bladder accounted for 0,3.44%,0.92%,and the volumes of muscle accounted for 94.84%,88.51%,95.24%of their body volumes respectively.The swim bladder of the longtail tuna has degenerated,while that of the bigeye tuna is conical,exhibiting the highest volume proportion among the three species.In contrast,the swim bladder of the albacore tuna is both flat and elongated,resembling an arc.Additionally,the surface area and the volume of the bigeye tuna’s swim bladder differ signifi-cantly from those of the albacore tuna.Regarding skeletal and muscular structures,the bigeye tuna has the highest skeletal volume proportion(8.05%),whereas the albacore tuna exhibits the highest muscle volume proportion(95.24%).These morphological differences are closely associated with their respective habitats.This study demonstrates the potential of CT technology in fish morphological research,providing a reliable,non-invasive method for analyzing internal structures,quantifying organ characteristics and improving the accuracy of acoustic stock assessment.展开更多
Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinom...Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinoma pathologically conformed, plan scans were done firstly. Two-phase spiral CT was performed within one breathhold each. Distension of the stomach was achieved by intravenous application of anisodamine and effervescent granules. After bolus injection of contrast medium, scanning was performed in the arterial and venous phase, and the source images were thin reconstructed. The stomach to three-dimension analysis was constructed by volume rendering （VR） multiplanaz volume reconstruction （MPVR）, shaded surface display （SSD） and CT virtual gastroscopy （CTVG） technique. In combination with the sources images, gastric tumour invasion and lymph node metastasis was assessed, and TNM staging was performed. Results： In 29 cases of gastric carcinoma, the sensitivity and specificity of two-phase multidetector-row spiral CT three-dimensional reconstruction technique in T1, T2, T3 and Ta staging, the sensitivity and specificity was 50% and 50%, 87.5% and 77.8%, 83.3% and 76.9% and 100% and 80% respectively. For the N staging, the sensitivity and specificity in No, N1, and N2 N3 was 83.3% and 71.4%, 87.5% and 77.8% and 81.8% and 75% respectively. The sensitivity and the specificity for M1 staging was 100%. Conclusion： The reconstruction technique in combination with 16-slices spiral-CT can perform TNM staging well and effectively guide the choice of the surgical procedures for gastric cancer.展开更多
In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is prop...In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is proposed. The second-order statistics based on texture features are analyzed to evaluate the scale stationarity of the training image. The multiple-point statistics of the training image are applied to obtain the multiple-point statistics stationarity estimation by the multi-point density function. The results show that the reconstructed 3D structures are closer to reality when the training image has better scale stationarity and multiple-point statistics stationarity by the indications of local percolation probability and two-point probability. Moreover, training images with higher multiple-point statistics stationarity and lower scale stationarity are likely to obtain closer results to the real 3D structure, and vice versa. Thus, stationarity analysis of the training image has far-reaching significance in choosing a better 2D thin section image for the 3D reconstruction of porous media. Especially, high-order statistics perform better than low-order statistics.展开更多
Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affe...Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affected, and the environment for Qiang Culture was difficult to recover. It highlighted that three-dimensional reconstruction of Qiang Culture should stress the core task and timely and effectively rescue endangered cultural heritages of Qiang Nationality from the perspectives of material and spiritual life. It had explained focuses of three-dimensional pattern construction in detail. In terms of spatial reconstruction, it should reconstruct native culture and history while material culture was constructed, and reconstruct Qiang culture highland by depending on aborigines; in terms of cluster reconstruction, it should give support to large tourism enterprises and perfect tourism chain; in terms of ecological reconstruction, it should enhance construction and demonstration of "ecological protection pilot area of Qiang culture"; in terms of development reconstruction, it should realize coordinated unity between protection and development according to classification protection, characteristic protection and key protection, so as to form the virtuous circle of post-disaster recovery protection and sustainable development.展开更多
After spinal cord injury,impairment of the sensorimotor circuit can lead to dysfunction in the motor,sensory,proprioceptive,and autonomic nervous systems.Functional recovery is often hindered by constraints on the tim...After spinal cord injury,impairment of the sensorimotor circuit can lead to dysfunction in the motor,sensory,proprioceptive,and autonomic nervous systems.Functional recovery is often hindered by constraints on the timing of interventions,combined with the limitations of current methods.To address these challenges,various techniques have been developed to aid in the repair and reconstruction of neural circuits at different stages of injury.Notably,neuromodulation has garnered considerable attention for its potential to enhance nerve regeneration,provide neuroprotection,restore neurons,and regulate the neural reorganization of circuits within the cerebral cortex and corticospinal tract.To improve the effectiveness of these interventions,the implementation of multitarget early interventional neuromodulation strategies,such as electrical and magnetic stimulation,is recommended to enhance functional recovery across different phases of nerve injury.This review concisely outlines the challenges encountered following spinal cord injury,synthesizes existing neurostimulation techniques while emphasizing neuroprotection,repair,and regeneration of impaired connections,and advocates for multi-targeted,task-oriented,and timely interventions.展开更多
[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of ...[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.展开更多
The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To...The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.展开更多
During the oxygen evolution reaction(OER),reconstruction of transition metal sulfides(TMSs)is inevitable.However,the lack of a clear theoretical understanding of this process has impeded the development of effective r...During the oxygen evolution reaction(OER),reconstruction of transition metal sulfides(TMSs)is inevitable.However,the lack of a clear theoretical understanding of this process has impeded the development of effective reconstruction regulation strategies.In this study,we first explored the reconstruction mechanism of CoS_(2)during OER from the perspective of electronic structure and identified two possible pathways:the OH-assisted mechanism and the O-assisted mechanism.Further verification showed that these mechanisms are universally applicable to other TMSs(e.g.,FeS_(2)).Based on the reconstruction mechanism,we investigated the basic reasons for the influence of various regulation strategies,such as vacancy modification and facet engineering,on the reconstruction ability.This verified that the method of analyzing the change in the reconstruction ability of catalysts based on the reconstruction mechanism has a high degree of applicability.Importantly,we proposed a core regulation strategy:the coordination symmetry regulation strategy.Specifically,by breaking the symmetry of the surface coordination environment of TMSs(such as introducing heteroatom doping or strain),the reconstruction process will be facilitated.Our findings provide a comprehensive mechanistic explanation for the reconstruction of TMS catalysts and offer a new idea for the rational design of OER catalysts with controllable reconstruction capacity.展开更多
There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution...There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.展开更多
Unmanned aerial vehicle(UAV)-borne gamma-ray spectrum survey plays a crucial role in geological mapping,radioactive mineral exploration,and environmental monitoring.However,raw data are often compromised by flight and...Unmanned aerial vehicle(UAV)-borne gamma-ray spectrum survey plays a crucial role in geological mapping,radioactive mineral exploration,and environmental monitoring.However,raw data are often compromised by flight and instrument background noise,as well as detector resolution limitations,which affect the accuracy of geological interpretations.This study aims to explore the application of the Real-ESRGAN algorithm in the super-resolution reconstruction of UAV-borne gamma-ray spectrum images to enhance spatial resolution and the quality of geological feature visualization.We conducted super-resolution reconstruction experiments with 2×,4×and 6×magnification using the Real-ESRGAN algorithm,comparing the results with three other mainstream algorithms(SRCNN,SRGAN,FSRCNN)to verify the superiority in image quality.The experimental results indicate that Real-ESRGAN achieved a structural similarity index(SSIM)value of 0.950 at 2×magnification,significantly higher than the other algorithms,demonstrating its advantage in detail preservation.Furthermore,Real-ESRGAN effectively reduced ringing and overshoot artifacts,enhancing the clarity of geological structures and mineral deposit sites,thus providing high-quality visual information for geological exploration.展开更多
Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to ...Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to the unique functional attributes and interaction patterns inherent to different layers.This paper addresses the critical question of whether structural information from a known layer can be used to reconstruct the unknown intralayer structure of a target layer within general weighted output-coupling multilayer networks.Building upon the generalized synchronization principle,we propose an innovative reconstruction method that incorporates two essential components in the design of structure observers,the cross-layer coupling modulator and the structural divergence term.A key advantage of the proposed reconstruction method lies in its flexibility to freely designate both the unknown target layer and the known reference layer from the general weighted output-coupling multilayer network.The reduced dependency on full-state observability enables more deployment in engineering applications with partial measurements.Numerical simulations are conducted to validate the effectiveness of the proposed structure reconstruction method.展开更多
Background 3D botanical tree reconstruction from a single image plays a vital role in the field of computer graphics.However,accurately capturing the intricate branching patterns and detailed morphologies of trees rem...Background 3D botanical tree reconstruction from a single image plays a vital role in the field of computer graphics.However,accurately capturing the intricate branching patterns and detailed morphologies of trees remains a challenge.Methods In this study,we proposed a novel approach for single-image tree reconstruction using a conditional generative adversarial network to infer the 3D skeleton of a tree in the form of a 2D skeleton depth map.Based on the 2D skeleton depth map,a corresponding branching structure(3D skeleton)that inherits the tree shape in the input image and leaves can be generated using a procedural modeling technique.Result Experimental results show that the proposed method accurately reconstructs diverse tree structures across species.Both quantitative and qualitative evaluations demonstrate improved skeleton completeness,branching accuracy,and visual realism over baseline methods,while requiring no user input.Conclusions Our proposed approach for generating lifelike 3D tree models from a single image with no user input shows its proficiency in achieving efficient and reliable reconstruction.These results showcase the capability of the proposed model to recreate complex tree architectures while capturing their visual authenticity.展开更多
Fracability is a critical indicator for evaluating the exploration and development potential of coalbed methane reservoirs and assessing the effectiveness of hydraulic fracturing stimulation operations.Its core functi...Fracability is a critical indicator for evaluating the exploration and development potential of coalbed methane reservoirs and assessing the effectiveness of hydraulic fracturing stimulation operations.Its core function is to characterize the complexity of the induced fracture network and the resulting effective stimulated volume.In this study,we quantified fracture area and geometric complexity using true triaxial fracturing experiments and computed tomography three-dimensional(3D)reconstruction technology,combined with the box-counting method to calculate the 3D fractal dimension of the fracture surfaces.The results revealed that the total fracture surface area per unit volume of the stimulated reservoir effectively characterized reservoir fracability;specifically,both a larger total fracture surface area and a higher fractal dimension corresponded to better reservoir fracability.Fracture complexity was enhanced by a decrease in the horizontal principal stress difference or an increase in the injection rate.Under optimal conditions of a 3 MPa stress difference and an injection rate of 60 mL/min,fracability improved by 27.6%.Furthermore,liquid carbon dioxide(CO_(2))improved fracability by 50.7%compared to using water as the fracturing fluid,a result attributed to its low viscosity and strong diffusion capacity,which activated a greater number of natural fractures.A fracability evaluation model integrating brittleness,fracture toughness,and dimensionless net pressure was developed using regression analysis,which demonstrated high reliability with a strong determination coefficient(R^(2))of 0.9019.This study clarifies the logical relationships among fracture area,complexity,and fractal dimension,providing a novel method for evaluating the fracability of coal reservoirs.展开更多
AIM:To evaluate the efficacy and safety of decellularized conjunctival stroma(DCS)as a novel biomaterial by comparing its grafting outcomes with amniotic membrane(AM)when used for conjunctival reconstruction after pri...AIM:To evaluate the efficacy and safety of decellularized conjunctival stroma(DCS)as a novel biomaterial by comparing its grafting outcomes with amniotic membrane(AM)when used for conjunctival reconstruction after primary pterygium excision.METHODS:This randomized,parallel-controlled study with allocation concealment enrolled 40 patients with primary pterygium.Participants were randomly assigned to two groups using the sealed envelope method:the DCS group(n=20)and the AM group(n=18),receiving DCS and AM grafts respectively.Slit-lamp photography of the operative eyes was performed preoperatively and at 1,3,5,7,10,30,90,and 180d postoperatively.Best-corrected visual acuity(BCVA)and symptom scores were recorded simultaneously.In vivo confocal microscopy was conducted at 3 and 6mo postoperatively.RESULTS:All participants exhibited improved postoperative symptoms.The mean age was 60±9y(male/female ratio:6/14)in the DCS group and 56±12y(male/female ratio:7/11)in the AM group.The average epithelial healing time was 9.89±3.54d in the DCS group and 8.17±1.34d in the AM group(P=0.084).One recurrence case was observed in each group.Postoperative graft hemorrhage was significantly more severe in the DCS group than in the AM group only at 30d postoperatively(P=0.011).In vivo confocal microscopy revealed conjunctival epithelial cell growth in both groups at 90d postoperatively,while clear corneo-conjunctival cell boundaries were observed until 180d postoperatively.CONCLUSION:DCS used in primary pterygium surgery has a safety profile comparable to AM.It promotes rapid postoperative conjunctival healing,achieves a relatively low pterygium recurrence rate,and yields outcomes similar to AM.DCS provides a novel biomaterial option for conjunctival reconstruction after pterygium excision and the treatment of other conjunctival injuries.展开更多
文摘Introduction: Middle ear volume(MEV) is a clinically relevant parameter across middle ear diseases. MEV values between these techniques have never before been tested for agreement in ears with perforated tympanic membranes(TMs).Methods: Middle ears were identified from 36 patients ranging 18-89 years of age with TM perforations who underwent tympanometry and temporal bone computed tomography(CT) between 2005 and 2015. MEVs calculated by both tympanometry and three-dimensional volume reconstruction(3DVR) were analyzed for agreement using Bland Altman plots. The differences between tympanometric and 3DVR MEV values for each given middle ear were characterized across MEV quartiles(1= smallest; 4= largest) and across increasing states of middle ear disease using Kruskale Wallis and Wilcoxon testing with Bonferroni correction.Results: Bland Altman plots demonstrated significant disagreement between MEV measurement techniques. Differences between tympanometric(T) and 3DVR MEV values were significantly greater with increasing average(i.e.(Tt3DVR)/2)) MEV per linear regression(p < 0.0001). Significance was demonstrated between fourth and first average MEV quartiles(p= 0.0024), fourth and second quartiles(p= 0.0024), third and first quartiles(p= 0.0048), and third and second quartiles(p= 0.048). Absolute MEV difference was not significantly different across varying states of middle ear disease(p= 0.44).Conclusion: Statistically and clinically significant disagreement was demonstrated between tympanometric and 3DVR MEV values. Studies that vary in MEV estimation techniques may be expected to demonstrate significantly different results. These preliminary results suggest that clinicians should endeavor to seek further confirmation when interpreting high tympanometric MEV values.
基金supported by grants from the National Natural Science Foundation of China(82170412)Shanghai Municipal Science and Technology Commission Clinical Innovation Research Special Project(23Y11905400).
文摘Perihilar cholangiocarcinoma(pCCA)and intrahepatic cholangiocarcinoma(iCCA)are highly malignant neoplasms with a 5-year overall survival rate of approximately 30%[1,2].Surgical resection remains the only potentially curative treatment,yet only one-fifth of patients are eligible for resection at initial diagnosis[3].Threedimensional(3D)reconstruction technology provides precise preoperative visualization of complex hilar anatomy,significantly enhancing surgical planning and outcomes[4].Recent advances in 3D reconstruction technology have enhanced preoperative planning by providing precise anatomical mapping of tumor-vessel relationships and biliary variations[4,5].Therefore,this report describes a case of left iCCA successfully resected with biliary reconstruction guided by 3D visualization.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金Supported by the Natural Science Foundation of Fujian Province,No.2022J011442.
文摘BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.
基金supported by the Central Guiding Local Science and Technology Development Fund of Shandong-Yellow River Basin(No.YDZX2023019)Shandong Natural Science Foundation of China(Nos.ZR2020QF067 and ZR2023QD073)+6 种基金the Discipline Cluster Research Project of Qingdao University“Deep mining and intelligent prediction of multimodal big data for marine ecological disasters”(No.20240604)sourced from the International Argo Program and the national programs that contribute to it(https://argo.ucsd.edu)the CMEMS(http://marine.copernicus.eu/)the CDS(https://cds.climate.copernicus.eu/)the EMODnet(https://www.emodnet-chemistry.eu/)obtained from the ERA5(https://www.ecmwf.int)derived from the Glob Colour Project(http://globcolour.info).
文摘Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems.Therefore,there is an urgent need to develop advanced tools to characterize the spatio-temporal variations of three-dimensional(3D)DO.To address this challenge,this study introduces the Light Gradient Boosting Machine(Light-GBM),combining satellite remote sensing and reanalysis data with Biogeochemical Argo data to accurately reconstruct the 3D DO structure in the Mediterranean Sea from 2010 to 2022.Various environmental parameters are incorporated as inputs,including spatiotemporal features,meteorological characteristics,and ocean color properties.The LightGBM model demonstrates excellent performance on the testing dataset with R^(2) of 0.958.The modeled DO agrees better with in-situ measurements than products from numerical models.Using the Shapley Additive exPlanations method,the contributions of input features are assessed.Sea surface temperatures provide a correlation with DO at the sea surface,while spatial coordinates supplement the view of the ocean interior.Based on the reconstructed 3D DO structure,we identify an oxygen minimum zone in the western Mediterranean that expands continuously,reaching depths of approximately 300–800 m.The western Mediterranean exhibits a significant declining trend.This study enhances marine environmental evidence by proposing a precise and cost-effective approach for reconstructing 3D DO,thereby offering insights into the dynamics of DO variations under changing climatic conditions.
基金National Key Research and Development Program of China,Grant/Award Number:2021YFC2902103National Natural Science Foundation of China,Grant/Award Number:51934001Fundamental Research Funds for the Central Universities,Grant/Award Number:2023JCCXLJ02。
文摘Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstruction model,this study proposes a quantitative microstructure characterization method combining the roughness evaluation index and the 3D fractal dimension to study the change rule of the fracture surface morphology after blasting.This method was applied and validated in the study of the fracture microstructure of the rock after blasting.The results show that the fracture morphology characteristics of the 3D contour digital reconstruction model have good correlation with the changes of the blasting action.The undulation rate of the three-dimensional surface profile of the rock is more prone to dramatic rise and dramatic fall morphology.In terms of tilting trend,the tilting direction also shows gradual disorder,with the tilting angle increasing correspondingly.All the roughness evaluation indexes of the rock fissure surface after blasting show a linear and gradually increasing trend as the distance to the bursting center increases;the difference between the two-dimensional roughness evaluation indexes and the three-dimensional ones of the same micro-area rock samples also becomes increasingly larger,among which the three-dimensional fissure roughness coefficient JRC and the surface roughness ratio Rs display better correlation.Compared with the linear fitting formula of the power function relationship,the three-dimensional fractal dimension of the postblast fissure surface is fitted with the values of JRC and Rs,which renders higher correlation coefficients,and the degree of linear fitting of JRC to the three-dimensional fractal dimension is higher.The fractal characteristics of the blast-affected region form a unity with the three-dimensional roughness evaluation of the fissure surface.
基金funded by the National Key R&D Pro-gram(No.2023YFD2401301)the R&D Program of CNFC Overseas Fishery Co.,Ltd.(No.COFC-C-F-2024-004).
文摘To better understand the biological structure of bigeye tuna(Thunnus obesus),albacore tuna(Thunnus alalunga),and longtail tuna(Thunnus tonggol),computed tomography(CT)was used to scan their bodies,and the data are processed by Mimics software.The skeleton,swim bladder,and muscle of the three tuna species are reconstructed in three dimensions.The surface area and volume of the corresponding parts are measured.The results show that the surface areas of the skeleton of longtail tuna,bigeye tuna,albacore tuna accounted for 28.18%,37.34%,33.45%of their whole body surface areas respectively;the surface areas of swim bladder accounted for 0,2.06%,2.72% of their whole body surface area respectively;and the surface areas of muscle accounted for 71.82%,60.6%,63.83%of their whole body surface areas respectively.And the volumes of skeleton accounted for 28.18%,8.05%,3.84%,the volumes of swim bladder accounted for 0,3.44%,0.92%,and the volumes of muscle accounted for 94.84%,88.51%,95.24%of their body volumes respectively.The swim bladder of the longtail tuna has degenerated,while that of the bigeye tuna is conical,exhibiting the highest volume proportion among the three species.In contrast,the swim bladder of the albacore tuna is both flat and elongated,resembling an arc.Additionally,the surface area and the volume of the bigeye tuna’s swim bladder differ signifi-cantly from those of the albacore tuna.Regarding skeletal and muscular structures,the bigeye tuna has the highest skeletal volume proportion(8.05%),whereas the albacore tuna exhibits the highest muscle volume proportion(95.24%).These morphological differences are closely associated with their respective habitats.This study demonstrates the potential of CT technology in fish morphological research,providing a reliable,non-invasive method for analyzing internal structures,quantifying organ characteristics and improving the accuracy of acoustic stock assessment.
基金This project was supported by a grant from the Natural Science Foundation of Hubei Province (No. 2002AB130)
文摘Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinoma pathologically conformed, plan scans were done firstly. Two-phase spiral CT was performed within one breathhold each. Distension of the stomach was achieved by intravenous application of anisodamine and effervescent granules. After bolus injection of contrast medium, scanning was performed in the arterial and venous phase, and the source images were thin reconstructed. The stomach to three-dimension analysis was constructed by volume rendering （VR） multiplanaz volume reconstruction （MPVR）, shaded surface display （SSD） and CT virtual gastroscopy （CTVG） technique. In combination with the sources images, gastric tumour invasion and lymph node metastasis was assessed, and TNM staging was performed. Results： In 29 cases of gastric carcinoma, the sensitivity and specificity of two-phase multidetector-row spiral CT three-dimensional reconstruction technique in T1, T2, T3 and Ta staging, the sensitivity and specificity was 50% and 50%, 87.5% and 77.8%, 83.3% and 76.9% and 100% and 80% respectively. For the N staging, the sensitivity and specificity in No, N1, and N2 N3 was 83.3% and 71.4%, 87.5% and 77.8% and 81.8% and 75% respectively. The sensitivity and the specificity for M1 staging was 100%. Conclusion： The reconstruction technique in combination with 16-slices spiral-CT can perform TNM staging well and effectively guide the choice of the surgical procedures for gastric cancer.
基金The National Natural Science Foundation of China(No.60972130)
文摘In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is proposed. The second-order statistics based on texture features are analyzed to evaluate the scale stationarity of the training image. The multiple-point statistics of the training image are applied to obtain the multiple-point statistics stationarity estimation by the multi-point density function. The results show that the reconstructed 3D structures are closer to reality when the training image has better scale stationarity and multiple-point statistics stationarity by the indications of local percolation probability and two-point probability. Moreover, training images with higher multiple-point statistics stationarity and lower scale stationarity are likely to obtain closer results to the real 3D structure, and vice versa. Thus, stationarity analysis of the training image has far-reaching significance in choosing a better 2D thin section image for the 3D reconstruction of porous media. Especially, high-order statistics perform better than low-order statistics.
文摘Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affected, and the environment for Qiang Culture was difficult to recover. It highlighted that three-dimensional reconstruction of Qiang Culture should stress the core task and timely and effectively rescue endangered cultural heritages of Qiang Nationality from the perspectives of material and spiritual life. It had explained focuses of three-dimensional pattern construction in detail. In terms of spatial reconstruction, it should reconstruct native culture and history while material culture was constructed, and reconstruct Qiang culture highland by depending on aborigines; in terms of cluster reconstruction, it should give support to large tourism enterprises and perfect tourism chain; in terms of ecological reconstruction, it should enhance construction and demonstration of "ecological protection pilot area of Qiang culture"; in terms of development reconstruction, it should realize coordinated unity between protection and development according to classification protection, characteristic protection and key protection, so as to form the virtuous circle of post-disaster recovery protection and sustainable development.
基金supported by the National Key Research and Development Program of China,No.2023YFC3603705(to DX)the National Natural Science Foundation of China,No.82302866(to YZ).
文摘After spinal cord injury,impairment of the sensorimotor circuit can lead to dysfunction in the motor,sensory,proprioceptive,and autonomic nervous systems.Functional recovery is often hindered by constraints on the timing of interventions,combined with the limitations of current methods.To address these challenges,various techniques have been developed to aid in the repair and reconstruction of neural circuits at different stages of injury.Notably,neuromodulation has garnered considerable attention for its potential to enhance nerve regeneration,provide neuroprotection,restore neurons,and regulate the neural reorganization of circuits within the cerebral cortex and corticospinal tract.To improve the effectiveness of these interventions,the implementation of multitarget early interventional neuromodulation strategies,such as electrical and magnetic stimulation,is recommended to enhance functional recovery across different phases of nerve injury.This review concisely outlines the challenges encountered following spinal cord injury,synthesizes existing neurostimulation techniques while emphasizing neuroprotection,repair,and regeneration of impaired connections,and advocates for multi-targeted,task-oriented,and timely interventions.
文摘[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.
文摘The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.
基金supported by the National Key Research and Development program(2022YFA1504000)the National Natural Science Foundation of China(22302101)+4 种基金the Fundamental Research Funds for the Central Universities(63185015)the Shenzhen Science and Technology Program(JCYJ20210324121002007,JCYJ20230807151503007)the Yunnan Provincial Science and Technology Project at Southwest United Graduate School(202402AO370001)the China Postdoctoral Science Foundation(2022M721699)the Guangdong Basic and Applied Basic Research Foundation(2024A1515010347).
文摘During the oxygen evolution reaction(OER),reconstruction of transition metal sulfides(TMSs)is inevitable.However,the lack of a clear theoretical understanding of this process has impeded the development of effective reconstruction regulation strategies.In this study,we first explored the reconstruction mechanism of CoS_(2)during OER from the perspective of electronic structure and identified two possible pathways:the OH-assisted mechanism and the O-assisted mechanism.Further verification showed that these mechanisms are universally applicable to other TMSs(e.g.,FeS_(2)).Based on the reconstruction mechanism,we investigated the basic reasons for the influence of various regulation strategies,such as vacancy modification and facet engineering,on the reconstruction ability.This verified that the method of analyzing the change in the reconstruction ability of catalysts based on the reconstruction mechanism has a high degree of applicability.Importantly,we proposed a core regulation strategy:the coordination symmetry regulation strategy.Specifically,by breaking the symmetry of the surface coordination environment of TMSs(such as introducing heteroatom doping or strain),the reconstruction process will be facilitated.Our findings provide a comprehensive mechanistic explanation for the reconstruction of TMS catalysts and offer a new idea for the rational design of OER catalysts with controllable reconstruction capacity.
基金supported by the National Nature Science Foundation of China(Nos.12027901 and 12041202)Synchrotron Radiation Joint Fund of University of Science and Technology of China(Nos.KY2090000059 and KY2090000054)。
文摘There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.
基金supported by the National Natural Science Foundation of China(Nos.12205044 and 12265003)2024 Jiangxi Province Civil-Military Integration Research Institute‘BeiDou+’Project Subtopic(No.2024JXRH0Y06).
文摘Unmanned aerial vehicle(UAV)-borne gamma-ray spectrum survey plays a crucial role in geological mapping,radioactive mineral exploration,and environmental monitoring.However,raw data are often compromised by flight and instrument background noise,as well as detector resolution limitations,which affect the accuracy of geological interpretations.This study aims to explore the application of the Real-ESRGAN algorithm in the super-resolution reconstruction of UAV-borne gamma-ray spectrum images to enhance spatial resolution and the quality of geological feature visualization.We conducted super-resolution reconstruction experiments with 2×,4×and 6×magnification using the Real-ESRGAN algorithm,comparing the results with three other mainstream algorithms(SRCNN,SRGAN,FSRCNN)to verify the superiority in image quality.The experimental results indicate that Real-ESRGAN achieved a structural similarity index(SSIM)value of 0.950 at 2×magnification,significantly higher than the other algorithms,demonstrating its advantage in detail preservation.Furthermore,Real-ESRGAN effectively reduced ringing and overshoot artifacts,enhancing the clarity of geological structures and mineral deposit sites,thus providing high-quality visual information for geological exploration.
基金Project supported by the National Natural Science Foun-dation of China(Grant No.62373197)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province,China(Grant No.23KJB120010)+1 种基金the Industry-University-Research Cooperation Project of Jiangsu Province,China(Grant No.BY20251038)the Cultivation and In-cubation Project of the College of Automation,Nanjing Uni-versity of Posts and Telecommunications.
文摘Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to the unique functional attributes and interaction patterns inherent to different layers.This paper addresses the critical question of whether structural information from a known layer can be used to reconstruct the unknown intralayer structure of a target layer within general weighted output-coupling multilayer networks.Building upon the generalized synchronization principle,we propose an innovative reconstruction method that incorporates two essential components in the design of structure observers,the cross-layer coupling modulator and the structural divergence term.A key advantage of the proposed reconstruction method lies in its flexibility to freely designate both the unknown target layer and the known reference layer from the general weighted output-coupling multilayer network.The reduced dependency on full-state observability enables more deployment in engineering applications with partial measurements.Numerical simulations are conducted to validate the effectiveness of the proposed structure reconstruction method.
文摘Background 3D botanical tree reconstruction from a single image plays a vital role in the field of computer graphics.However,accurately capturing the intricate branching patterns and detailed morphologies of trees remains a challenge.Methods In this study,we proposed a novel approach for single-image tree reconstruction using a conditional generative adversarial network to infer the 3D skeleton of a tree in the form of a 2D skeleton depth map.Based on the 2D skeleton depth map,a corresponding branching structure(3D skeleton)that inherits the tree shape in the input image and leaves can be generated using a procedural modeling technique.Result Experimental results show that the proposed method accurately reconstructs diverse tree structures across species.Both quantitative and qualitative evaluations demonstrate improved skeleton completeness,branching accuracy,and visual realism over baseline methods,while requiring no user input.Conclusions Our proposed approach for generating lifelike 3D tree models from a single image with no user input shows its proficiency in achieving efficient and reliable reconstruction.These results showcase the capability of the proposed model to recreate complex tree architectures while capturing their visual authenticity.
基金supported by the Natural Science Foundation of China(Grant No.52574047 and Grant No.52374045)Key Project of Sichuan Provincial Joint Fund for Science Technology and Education,China(Grant No.2025NSFSC2008).
文摘Fracability is a critical indicator for evaluating the exploration and development potential of coalbed methane reservoirs and assessing the effectiveness of hydraulic fracturing stimulation operations.Its core function is to characterize the complexity of the induced fracture network and the resulting effective stimulated volume.In this study,we quantified fracture area and geometric complexity using true triaxial fracturing experiments and computed tomography three-dimensional(3D)reconstruction technology,combined with the box-counting method to calculate the 3D fractal dimension of the fracture surfaces.The results revealed that the total fracture surface area per unit volume of the stimulated reservoir effectively characterized reservoir fracability;specifically,both a larger total fracture surface area and a higher fractal dimension corresponded to better reservoir fracability.Fracture complexity was enhanced by a decrease in the horizontal principal stress difference or an increase in the injection rate.Under optimal conditions of a 3 MPa stress difference and an injection rate of 60 mL/min,fracability improved by 27.6%.Furthermore,liquid carbon dioxide(CO_(2))improved fracability by 50.7%compared to using water as the fracturing fluid,a result attributed to its low viscosity and strong diffusion capacity,which activated a greater number of natural fractures.A fracability evaluation model integrating brittleness,fracture toughness,and dimensionless net pressure was developed using regression analysis,which demonstrated high reliability with a strong determination coefficient(R^(2))of 0.9019.This study clarifies the logical relationships among fracture area,complexity,and fractal dimension,providing a novel method for evaluating the fracability of coal reservoirs.
基金Supported by grants from the National Natural Science Foundation of China(No.82171018,No.82371022)Beijing Hospitals Authority’s Ascent Plan(No.DFL20240202)+2 种基金The Youth Beijing Scholars Program(No.022)High Level Public Health Technical Talents Construction Project from Beijing(Jie Y)Beijing Municipal Public Welfare Development and Reform Pilot Project for Medical Research Institutes(No.2023YFC2410401).
文摘AIM:To evaluate the efficacy and safety of decellularized conjunctival stroma(DCS)as a novel biomaterial by comparing its grafting outcomes with amniotic membrane(AM)when used for conjunctival reconstruction after primary pterygium excision.METHODS:This randomized,parallel-controlled study with allocation concealment enrolled 40 patients with primary pterygium.Participants were randomly assigned to two groups using the sealed envelope method:the DCS group(n=20)and the AM group(n=18),receiving DCS and AM grafts respectively.Slit-lamp photography of the operative eyes was performed preoperatively and at 1,3,5,7,10,30,90,and 180d postoperatively.Best-corrected visual acuity(BCVA)and symptom scores were recorded simultaneously.In vivo confocal microscopy was conducted at 3 and 6mo postoperatively.RESULTS:All participants exhibited improved postoperative symptoms.The mean age was 60±9y(male/female ratio:6/14)in the DCS group and 56±12y(male/female ratio:7/11)in the AM group.The average epithelial healing time was 9.89±3.54d in the DCS group and 8.17±1.34d in the AM group(P=0.084).One recurrence case was observed in each group.Postoperative graft hemorrhage was significantly more severe in the DCS group than in the AM group only at 30d postoperatively(P=0.011).In vivo confocal microscopy revealed conjunctival epithelial cell growth in both groups at 90d postoperatively,while clear corneo-conjunctival cell boundaries were observed until 180d postoperatively.CONCLUSION:DCS used in primary pterygium surgery has a safety profile comparable to AM.It promotes rapid postoperative conjunctival healing,achieves a relatively low pterygium recurrence rate,and yields outcomes similar to AM.DCS provides a novel biomaterial option for conjunctival reconstruction after pterygium excision and the treatment of other conjunctival injuries.
