As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and ...As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theor...The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theoretical and practical significance for guiding oil and gas exploration.The sedimentary facies and sedimentary evolution of the high-resolution sequence framework of the Carboniferous Taiyuan Formation in the Hangjinqi area have been systematically analyzed for the first time by drilling,logging and seismic data.The results show that four types of sequence interfaces can be identified in the Taiyuan Formation:regional unconformity surfaces,scour surfaces,lithologic-lithofacies transformation surfaces and flooding surfaces.According to the sedimentary response caused by the upward and downward movements of the base level at different levels,the Taiyuan Formation can be divided into 2 long-term cycles(LSC_(1)-LSC_(2)),4 mid-term cycles(MSC_(1)-MSC4)and 7 short-term cycles(SSC_(1)-SSC7).The long-and mid-term cycles correspond to members T_(1)and T_(2)and layers T_(1)-1,T_(1-2),T_(2-1),and T_(2)-2,respectively.Long-term cycles are dominated by C_(1);mid-term cycles are dominated by C_(1)and C_(2),followed by A2;and short-term cycles are dominated by C_(1),C_(2),A1 and A2.Under the high-resolution sequence stratigraphic framework,the Hangjinqi area underwent a transformation of fan delta and tidal flat depositional systems during the Taiyuan Formation sedimentary period.In the MSC_(1)-MSC_(2)stage,owing to a large-scale paleocontinent,the fan delta sedimentary body,which was limited in scale and scope,developed only in the southeastern corner and gradually transitioned basinward to tidal flat facies.In the MSC3-MSC4 stage,as the paleocontinent continuously decreased and the sedimentary range expanded,fan-delta plain sedimentation began in the study area.Several braided distributary channels with poor connectivity developed on the fan-delta plain,and between them were floodplains and peat swamps.展开更多
The Fujian oyster(Crassostrea angulata) is an economically significant shellfish species distributed mainly along the Fujian coast, Southeast China. However, its genetic diversity and structure remain unclear. The mai...The Fujian oyster(Crassostrea angulata) is an economically significant shellfish species distributed mainly along the Fujian coast, Southeast China. However, its genetic diversity and structure remain unclear. The main distribution area of the C. angulata is located in Fujian, South China. In total, 420 C. angulata were collected from 14 natural habitats(populations) along the Fujian coast, and their genetic diversity and structure were analyzed in the mitochondrial COI and nuclear gene ITS2 sequences. Results reveal that all the 14 populations of C. angulata exhibited high levels of genetic diversity, with a total of 57(haplotype diversity: 0.811±0.016) and 124(haplotype diversity: 0.912±0.007) haplotypes revealed by COI and ITS2, respectively. Notably, significant intermediate level of genetic differentiations between the Ningde Zhujiang(ZJ) population(FS T by COI: 0.035–0.142, P<0.05;FS T by ITS2: 0.078–0.123, P<0.05) with other populations were observed for the first time, which is also supported by the results of molecular variance analysis(FC T by COI: 0.105, P<0.05;FC T by ITS2: 0.086, P<0.05) and the clustering of the ZJ population into distinct branches in the interpopulation genetic differentiation tree. Furthermore, the evolutionary tree and haplotype network analyses do not support the formation of a clear geographical genealogical structure among these 14 populations. In addition, the population dynamics analysis suggests that the C. angulata may have undergone expansion during the third ice age of the Pleistocene. These results provide a reference for the preservation and further genetic improvement of C. angulata.展开更多
Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to thei...Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to their small gyromagnetic ratios.A promising approach to achieving high nuclear spin polarization is transferring the polarization of electrons to nuclear spins.The nitrogen-vacancy(NV)center in diamond has emerged as a highly effective medium for this purpose,and various hyperpolarization protocols have been developed.Among these,the pulsed polarization(PulsePol)method has been extensively studied due to its robustness against static energy shifts of the electron spin.In this work,we present a novel polarization protocol and uncover a family of magic sequences for hyperpolarizing nuclear spins,with PulsePol emerging as a special case of our general approach.Notably,we demonstrate that some of these magic sequences exhibit significantly greater robustness compared to the PulsePol protocol in the presence of finite half𝜋pulse duration of the protocol,Rabi and detuning errors.This enhanced robustness positions our protocol as a more suitable candidate for hyper-polarizing nuclear spins species with large gyromagnetic ratios and also ensures better compatibility with high-efficiency readout techniques at high magnetic fields.Additionally,the generality of our protocol allows for its direct application to other solid-state quantum systems beyond the NV center.展开更多
There is a large amount of fat in the postganglionic segment of the brachial plexus nerve.The use of short T1 inversion recovery pulse sequence may improve signal strength of the brachial plexus postganglionic segment...There is a large amount of fat in the postganglionic segment of the brachial plexus nerve.The use of short T1 inversion recovery pulse sequence may improve signal strength of the brachial plexus postganglionic segment.The present study revealed that the combination of three-dimensional fast imaging employing steady-state acquisition with phase-cycled and short T1 inversion recovery pulse sequence clearly displayed the anatomical morphology and structure of the brachial plexus nerve,together with maximum intensity projection,volume rendering and other three-dimensional reconstruction techniques.Our results suggested that this method is also suitable for providing accurate assessment and diagnosis of the site,severity and scope of brachial plexus injury.展开更多
In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated p...In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated previously.The method consists of the following steps:1) the coordinate of several markers and depth map for each stereo pair was determined from the sequences of stereo images by relations of markers' coordinate the correspondence between markers was established,2) the 3D motion parameters of the target was computed based upon the matched markers' coordinate,and 3) translated 3D motion parameters estimation into the problem of least square according to the movement model of the object to be measured.Without using line,curve or corner correspondence,this method can calculate the depth of these markers feature easily and quickly in contrast to traditional approaches.The two CCD cameras work on 200 f/s,and each processing cost time is about 3 ms.It was found that,by using several markers and a large number of stereo images,this method can improve the computational speed,robustness and numerical accuracy of the motion parameters in comparison with traditional methods.The virtual simulation experiment was conducted using synthesized stereo image sequences based on 6-DOF motion platform and the experimental results proved the validity of our approach and showed that the translation and rotation precision is up to 0.1 mm and 0.1°.展开更多
This paper advances a three-dimensional space interpolation method of grey / depth image sequence, which breaks free from the limit of original practical photographing route. Pictures can cruise at will in space. By u...This paper advances a three-dimensional space interpolation method of grey / depth image sequence, which breaks free from the limit of original practical photographing route. Pictures can cruise at will in space. By using space sparse sampling, great memorial capacity can be saved and reproduced scenes can be controlled. To solve time consuming and complex computations in three-dimensional interpolation algorithm, we have studied a fast and practical algorithm of scattered space lattice and that of 'Warp' algorithm with proper depth. By several simple aspects of three dimensional space interpolation, we succeed in developing some simple and practical algorithms. Some results of simulated experiments with computers have shown that the new method is absolutely feasible.展开更多
In this paper, we apply the Weyl's limit relation to calculate the limit ,?where γq (n) is the van der Corput sequence in base q, g (x, y, z),?is the asymptotic distribution function of (γq (n), γq (n +1), γq ...In this paper, we apply the Weyl's limit relation to calculate the limit ,?where γq (n) is the van der Corput sequence in base q, g (x, y, z),?is the asymptotic distribution function of (γq (n), γq (n +1), γq (n + 2)), and F (x, y, z) = max (x, y, z), min (x, y, z),?and xyz, respectively.展开更多
To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D lea...To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
In industrial control systems,such as power transmission facilities and water treatment plants,Programmable Logic Controllers(PLCs)can work consistently and stably over long periods if there are no faults.Black-box id...In industrial control systems,such as power transmission facilities and water treatment plants,Programmable Logic Controllers(PLCs)can work consistently and stably over long periods if there are no faults.Black-box identification aims to automatically construct Petri net models with the help of I/O signals from PLC devices only.The main challenge is how to convert the infinitely long PLC signals into an event sequence,which is the foundation for subsequent modeling.The current algorithms are confronted with a number of challenges,including an exponential increase in the number of transitions,high time complexity,and susceptibility to noisy signals.To solve these problems,this paper proposes a new method for converting PLC signals into a transition sequence.The method is based on the principles of Boolean absorption law,which filters out noise information in the I/O signals.Then firing functions representing input–output causality are constructed from the filtered signals.Finally,the original signal sequence is traversed to generate a transition sequence.The experimental results show that these methods can rapidly identify a transition sequence.Compared to traditional methods,the proposed algorithms have polynomial time complexity.展开更多
Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the ...Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the relationship between pore throat structure and crude oil mobility characteristics of full particle sequence reservoirs in the Lower Permian Fengcheng Formation of Mahu Sag,Junggar Basin,are revealed.(1)With the decrease of reservoir particle size,the volume of pores connected by large throats and the volume of large pores show a decreasing trend,and the distribution and peak ranges of throat and pore radius shift to smaller size in an orderly manner.The upper limits of throat radius,porosity and permeability of unconventional reservoirs in Fengcheng Formation are approximately 0.7μm,8%and 0.1×10^(−3)μm^(2),respectively.(2)As the reservoir particle size decreases,the distribution and peak ranges of pores hosting retained oil and movable oil are shifted to a smaller size in an orderly manner.With the increase of driving pressure,the amount of retained and movable oil of the larger particle reservoir samples shows a more obvious trend of decreasing and increasing,respectively.(3)With the increase of throat radius,the driving pressure of reservoir with different particle levels presents three stages,namely rapid decrease,slow decrease and stabilization.The oil driving pressures of various reservoirs and the differences of them decrease with the increase of temperature and obviously decrease with the increase of throat radius.According to the above experimental analysis,it is concluded that the deep shale oil of Fengcheng Formation in Mahu Sag has great potential for production under geological conditions.展开更多
The Fushan Depression is one of the petroliferous depressions in the Beibuwan Basin,South China Sea.Previous studies have preliminarily explored the origin and source of crude oils in some areas of this depression.Nev...The Fushan Depression is one of the petroliferous depressions in the Beibuwan Basin,South China Sea.Previous studies have preliminarily explored the origin and source of crude oils in some areas of this depression.Nevertheless,no systematic investigations on the classification and origin of oils and hy-drocarbon migration processes have been made for the entire petroleum system in this depression,which has significantly hindered the hydrocarbon exploration in the region.A total of 32 mudstone and 58 oil samples from the Fushan Depression were analyzed to definite the detailed oil-source correlation within the sequence and sedimentary framework.The organic matter of third member of Paleogene Liushagang Formation(Els(3))source rocks,both deltaic and lacustrine mudstone,are algal-dominated with high abundance of C_(23)tricyclic terpane and C_(30)4-methylsteranes.The deltaic source rocks occur-ring in the first member(Els_(1))and second member(Els_(2))of the Paleogene Liushagang Formation are characterized by high abundance of C_(19+20)tricyclic terpane and oleanane,reflecting a more terrestrial plants contribution.While lacustrine source rocks of Els_(1)and Els_(2)display the reduced input of terrige-nous organic matter with relatively low abundance of C 19+20 tricyclic terpane and oleanane.Three types of oils were identified by their biomarker compositions in this study.Most of the oils discovered in the Huachang and Bailian Els_(1)reservoir belong to group A and were derived from lacustrine source rocks of Els_(1)and Els_(2).Group B oils are found within the Els_(1)and Els_(2)reservoirs,showing a close relation to the deltaic source rocks of Els_(1)and Els_(2),respectively.Group C oils,occurring in the Els3 reservoirs,have a good affinity with the Els3 source rocks.The spatial distribution and accumulation of different groups of oils are mainly controlled by the sedimentary facies and specific structural conditions.The Els_(2)reservoir in the Yong'an area belonging to Group B oil,are adjacent to the source kitchen and could be considered as the favorable exploration area in the future.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade compone...Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.展开更多
Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma ...Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.展开更多
To address the discrepancies between well and seismic data in stratigraphic correlation of the Triassic Yanchang Formation in the Ordos Basin,NW China,traditional stratigraphic classification schemes,the latest 3D sei...To address the discrepancies between well and seismic data in stratigraphic correlation of the Triassic Yanchang Formation in the Ordos Basin,NW China,traditional stratigraphic classification schemes,the latest 3D seismic and drilling data,and reservoir sections are thoroughly investigated.Guided by the theory of sequence stratigraphy,the progradational sequence stratigraphic framework of the Yanchang Formation is systematically constructed to elucidate new deposition mechanisms in the depressed lacustrine basin,and it has been successfully applied to the exploration and development practices in the Qingcheng Oilfield.Key findings are obtained in three aspects.First,the seismic progradational reflections,marker tuff beds,and condensed sections of flooding surfaces in the Yanchang Formation are consistent and isochronous.Using flooding surface markers as a reference,a progradational sequence stratigraphic architecture is reconstructed for the middle-upper part of Yanchang Formation,and divided into seven clinoform units(CF1-CF7).Second,progradation predominantly occurs in semi-deep to deep lake environments,with the depositional center not always coinciding with the thickest strata.The lacustrine basin underwent an evolution of“oscillatory regression-progradational infilling-multi-phase superimposition”.Third,the case study of Qingcheng Oilfield reveals that the major pay zones consist of“isochronous but heterochronous”gravity-flow sandstone complexes.Guided by the progradational sequence stratigraphic architecture,horizontal well oil-layer penetration rates remain above 82%.The progradational sequence stratigraphic architecture and associated geological insights are more consistent with the sedimentary infilling mechanisms of large-scale continental depressed lacustrine basins and actual drilling results.The research results provide crucial theoretical and technical support for subsequent refined exploration and development of the Yanchang Formation,and are expected to offer a reference for research and production practice in similar continental lacustrine basins.展开更多
Attempts have been made to modulate motor sequence learning(MSL)through repetitive transcranial magnetic stimulation,targeting different sites within the sensorimotor network.However,the target with the optimum modula...Attempts have been made to modulate motor sequence learning(MSL)through repetitive transcranial magnetic stimulation,targeting different sites within the sensorimotor network.However,the target with the optimum modulatory effect on neural plasticity associated with MSL remains unclarified.This study was therefore designed to compare the role of the left primary motor cortex and the left supplementary motor area proper(SMAp)in modulating MSL across different complexity levels and for both hands,as well as the associated neuroplasticity by applying intermittent theta burst stimulation together with the electroencephalogram and concurrent transcranial magnetic stimulation.Our data demonstrated the role of SMAp stimulation in modulating neural communication to support MSL,which is achieved by facilitating regional activation and orchestrating neural coupling across distributed brain regions,particularly in interhemispheric connections.These findings may have important clinical implications,particularly for motor rehabilitation in populations such as post-stroke patients.展开更多
基金supported by the National Science Foundation of China(No.62171387)the Science and Technology Program of Sichuan Province(No.2024NSFSC0468)the China Postdoctoral Science Foundation(No.2019M663475).
文摘As an important resource in data link,time slots should be strategically allocated to enhance transmission efficiency and resist eavesdropping,especially considering the tremendous increase in the number of nodes and diverse communication needs.It is crucial to design control sequences with robust randomness and conflict-freeness to properly address differentiated access control in data link.In this paper,we propose a hierarchical access control scheme based on control sequences to achieve high utilization of time slots and differentiated access control.A theoretical bound of the hierarchical control sequence set is derived to characterize the constraints on the parameters of the sequence set.Moreover,two classes of optimal hierarchical control sequence sets satisfying the theoretical bound are constructed,both of which enable the scheme to achieve maximum utilization of time slots.Compared with the fixed time slot allocation scheme,our scheme reduces the symbol error rate by up to 9%,which indicates a significant improvement in anti-interference and eavesdropping capabilities.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
基金supported by the Fundamental Research Funds for the Liaoning Universities(Grant No.LJ202410166012).
文摘The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theoretical and practical significance for guiding oil and gas exploration.The sedimentary facies and sedimentary evolution of the high-resolution sequence framework of the Carboniferous Taiyuan Formation in the Hangjinqi area have been systematically analyzed for the first time by drilling,logging and seismic data.The results show that four types of sequence interfaces can be identified in the Taiyuan Formation:regional unconformity surfaces,scour surfaces,lithologic-lithofacies transformation surfaces and flooding surfaces.According to the sedimentary response caused by the upward and downward movements of the base level at different levels,the Taiyuan Formation can be divided into 2 long-term cycles(LSC_(1)-LSC_(2)),4 mid-term cycles(MSC_(1)-MSC4)and 7 short-term cycles(SSC_(1)-SSC7).The long-and mid-term cycles correspond to members T_(1)and T_(2)and layers T_(1)-1,T_(1-2),T_(2-1),and T_(2)-2,respectively.Long-term cycles are dominated by C_(1);mid-term cycles are dominated by C_(1)and C_(2),followed by A2;and short-term cycles are dominated by C_(1),C_(2),A1 and A2.Under the high-resolution sequence stratigraphic framework,the Hangjinqi area underwent a transformation of fan delta and tidal flat depositional systems during the Taiyuan Formation sedimentary period.In the MSC_(1)-MSC_(2)stage,owing to a large-scale paleocontinent,the fan delta sedimentary body,which was limited in scale and scope,developed only in the southeastern corner and gradually transitioned basinward to tidal flat facies.In the MSC3-MSC4 stage,as the paleocontinent continuously decreased and the sedimentary range expanded,fan-delta plain sedimentation began in the study area.Several braided distributary channels with poor connectivity developed on the fan-delta plain,and between them were floodplains and peat swamps.
基金Supported by the National Natural Science Foundation of China(No.32172979)the Natural Science Foundation of Fujian Province(No.2021J05159)the 2023 Special Program for Promoting High-Quality Development of Marine and Fishery Industry in Fujian Province(No.PJHYF-L-2023-2)。
文摘The Fujian oyster(Crassostrea angulata) is an economically significant shellfish species distributed mainly along the Fujian coast, Southeast China. However, its genetic diversity and structure remain unclear. The main distribution area of the C. angulata is located in Fujian, South China. In total, 420 C. angulata were collected from 14 natural habitats(populations) along the Fujian coast, and their genetic diversity and structure were analyzed in the mitochondrial COI and nuclear gene ITS2 sequences. Results reveal that all the 14 populations of C. angulata exhibited high levels of genetic diversity, with a total of 57(haplotype diversity: 0.811±0.016) and 124(haplotype diversity: 0.912±0.007) haplotypes revealed by COI and ITS2, respectively. Notably, significant intermediate level of genetic differentiations between the Ningde Zhujiang(ZJ) population(FS T by COI: 0.035–0.142, P<0.05;FS T by ITS2: 0.078–0.123, P<0.05) with other populations were observed for the first time, which is also supported by the results of molecular variance analysis(FC T by COI: 0.105, P<0.05;FC T by ITS2: 0.086, P<0.05) and the clustering of the ZJ population into distinct branches in the interpopulation genetic differentiation tree. Furthermore, the evolutionary tree and haplotype network analyses do not support the formation of a clear geographical genealogical structure among these 14 populations. In addition, the population dynamics analysis suggests that the C. angulata may have undergone expansion during the third ice age of the Pleistocene. These results provide a reference for the preservation and further genetic improvement of C. angulata.
基金supported by the National Natural Science Foundation of China (Grant Nos.12475012,62461160263 for P.W.,and 62276171 for H.L.)Quantum Science and Technology-National Science and Technology Major Project of China (Project No.2023ZD0300600 for P.W.)+3 种基金Guangdong Provincial Quantum Science Strategic Initiative (Grant Nos.GDZX240-3009 and GDZX2303005 for P.W.)Guangdong Basic and Applied Basic Research Foundation (Grant No.2024-A1515011938 for H.L.)Shenzhen Fundamental ResearchGeneral Project (Grant No.JCYJ20240813141503005 for H.L.)the Talents Introduction Foundation of Beijing Normal University (Grant No.310432106 for P.W.)。
文摘Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to their small gyromagnetic ratios.A promising approach to achieving high nuclear spin polarization is transferring the polarization of electrons to nuclear spins.The nitrogen-vacancy(NV)center in diamond has emerged as a highly effective medium for this purpose,and various hyperpolarization protocols have been developed.Among these,the pulsed polarization(PulsePol)method has been extensively studied due to its robustness against static energy shifts of the electron spin.In this work,we present a novel polarization protocol and uncover a family of magic sequences for hyperpolarizing nuclear spins,with PulsePol emerging as a special case of our general approach.Notably,we demonstrate that some of these magic sequences exhibit significantly greater robustness compared to the PulsePol protocol in the presence of finite half𝜋pulse duration of the protocol,Rabi and detuning errors.This enhanced robustness positions our protocol as a more suitable candidate for hyper-polarizing nuclear spins species with large gyromagnetic ratios and also ensures better compatibility with high-efficiency readout techniques at high magnetic fields.Additionally,the generality of our protocol allows for its direct application to other solid-state quantum systems beyond the NV center.
文摘There is a large amount of fat in the postganglionic segment of the brachial plexus nerve.The use of short T1 inversion recovery pulse sequence may improve signal strength of the brachial plexus postganglionic segment.The present study revealed that the combination of three-dimensional fast imaging employing steady-state acquisition with phase-cycled and short T1 inversion recovery pulse sequence clearly displayed the anatomical morphology and structure of the brachial plexus nerve,together with maximum intensity projection,volume rendering and other three-dimensional reconstruction techniques.Our results suggested that this method is also suitable for providing accurate assessment and diagnosis of the site,severity and scope of brachial plexus injury.
基金Sponsored by the National Natural Science Foundation of China(Grant No. 50275040)
文摘In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated previously.The method consists of the following steps:1) the coordinate of several markers and depth map for each stereo pair was determined from the sequences of stereo images by relations of markers' coordinate the correspondence between markers was established,2) the 3D motion parameters of the target was computed based upon the matched markers' coordinate,and 3) translated 3D motion parameters estimation into the problem of least square according to the movement model of the object to be measured.Without using line,curve or corner correspondence,this method can calculate the depth of these markers feature easily and quickly in contrast to traditional approaches.The two CCD cameras work on 200 f/s,and each processing cost time is about 3 ms.It was found that,by using several markers and a large number of stereo images,this method can improve the computational speed,robustness and numerical accuracy of the motion parameters in comparison with traditional methods.The virtual simulation experiment was conducted using synthesized stereo image sequences based on 6-DOF motion platform and the experimental results proved the validity of our approach and showed that the translation and rotation precision is up to 0.1 mm and 0.1°.
文摘This paper advances a three-dimensional space interpolation method of grey / depth image sequence, which breaks free from the limit of original practical photographing route. Pictures can cruise at will in space. By using space sparse sampling, great memorial capacity can be saved and reproduced scenes can be controlled. To solve time consuming and complex computations in three-dimensional interpolation algorithm, we have studied a fast and practical algorithm of scattered space lattice and that of 'Warp' algorithm with proper depth. By several simple aspects of three dimensional space interpolation, we succeed in developing some simple and practical algorithms. Some results of simulated experiments with computers have shown that the new method is absolutely feasible.
基金sponsored by the project P201/12/2351 of GA Czech Republic.
文摘In this paper, we apply the Weyl's limit relation to calculate the limit ,?where γq (n) is the van der Corput sequence in base q, g (x, y, z),?is the asymptotic distribution function of (γq (n), γq (n +1), γq (n + 2)), and F (x, y, z) = max (x, y, z), min (x, y, z),?and xyz, respectively.
文摘To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金supported by the Science and Technology Planning Project of Fujian Province,China,under Grant No.2024H0014(2024H01010100).
文摘In industrial control systems,such as power transmission facilities and water treatment plants,Programmable Logic Controllers(PLCs)can work consistently and stably over long periods if there are no faults.Black-box identification aims to automatically construct Petri net models with the help of I/O signals from PLC devices only.The main challenge is how to convert the infinitely long PLC signals into an event sequence,which is the foundation for subsequent modeling.The current algorithms are confronted with a number of challenges,including an exponential increase in the number of transitions,high time complexity,and susceptibility to noisy signals.To solve these problems,this paper proposes a new method for converting PLC signals into a transition sequence.The method is based on the principles of Boolean absorption law,which filters out noise information in the I/O signals.Then firing functions representing input–output causality are constructed from the filtered signals.Finally,the original signal sequence is traversed to generate a transition sequence.The experimental results show that these methods can rapidly identify a transition sequence.Compared to traditional methods,the proposed algorithms have polynomial time complexity.
基金Supported by Leading Talent Program of Autonomous Region(2022TSYCLJ0070)PetroChina Prospective and Basic Technological Project(2021DJ0108)Natural Science Foundation for Outstanding Young People in Shandong Province(ZR2022YQ30).
文摘Based on the experimental results of casting thin section,low temperature nitrogen adsorption,high pressure mercury injection,nuclear magnetic resonance T2 spectrum,contact angle and oil-water interfacial tension,the relationship between pore throat structure and crude oil mobility characteristics of full particle sequence reservoirs in the Lower Permian Fengcheng Formation of Mahu Sag,Junggar Basin,are revealed.(1)With the decrease of reservoir particle size,the volume of pores connected by large throats and the volume of large pores show a decreasing trend,and the distribution and peak ranges of throat and pore radius shift to smaller size in an orderly manner.The upper limits of throat radius,porosity and permeability of unconventional reservoirs in Fengcheng Formation are approximately 0.7μm,8%and 0.1×10^(−3)μm^(2),respectively.(2)As the reservoir particle size decreases,the distribution and peak ranges of pores hosting retained oil and movable oil are shifted to a smaller size in an orderly manner.With the increase of driving pressure,the amount of retained and movable oil of the larger particle reservoir samples shows a more obvious trend of decreasing and increasing,respectively.(3)With the increase of throat radius,the driving pressure of reservoir with different particle levels presents three stages,namely rapid decrease,slow decrease and stabilization.The oil driving pressures of various reservoirs and the differences of them decrease with the increase of temperature and obviously decrease with the increase of throat radius.According to the above experimental analysis,it is concluded that the deep shale oil of Fengcheng Formation in Mahu Sag has great potential for production under geological conditions.
基金funded by the South Oil Exploration and Development Company of PetroChina(2021-HNYJ-010).
文摘The Fushan Depression is one of the petroliferous depressions in the Beibuwan Basin,South China Sea.Previous studies have preliminarily explored the origin and source of crude oils in some areas of this depression.Nevertheless,no systematic investigations on the classification and origin of oils and hy-drocarbon migration processes have been made for the entire petroleum system in this depression,which has significantly hindered the hydrocarbon exploration in the region.A total of 32 mudstone and 58 oil samples from the Fushan Depression were analyzed to definite the detailed oil-source correlation within the sequence and sedimentary framework.The organic matter of third member of Paleogene Liushagang Formation(Els(3))source rocks,both deltaic and lacustrine mudstone,are algal-dominated with high abundance of C_(23)tricyclic terpane and C_(30)4-methylsteranes.The deltaic source rocks occur-ring in the first member(Els_(1))and second member(Els_(2))of the Paleogene Liushagang Formation are characterized by high abundance of C_(19+20)tricyclic terpane and oleanane,reflecting a more terrestrial plants contribution.While lacustrine source rocks of Els_(1)and Els_(2)display the reduced input of terrige-nous organic matter with relatively low abundance of C 19+20 tricyclic terpane and oleanane.Three types of oils were identified by their biomarker compositions in this study.Most of the oils discovered in the Huachang and Bailian Els_(1)reservoir belong to group A and were derived from lacustrine source rocks of Els_(1)and Els_(2).Group B oils are found within the Els_(1)and Els_(2)reservoirs,showing a close relation to the deltaic source rocks of Els_(1)and Els_(2),respectively.Group C oils,occurring in the Els3 reservoirs,have a good affinity with the Els3 source rocks.The spatial distribution and accumulation of different groups of oils are mainly controlled by the sedimentary facies and specific structural conditions.The Els_(2)reservoir in the Yong'an area belonging to Group B oil,are adjacent to the source kitchen and could be considered as the favorable exploration area in the future.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
基金Project supported by the National Natural Science Foundation of China(Nos.12372071 and 12372070)the Aeronautical Science Fund of China(No.2022Z055052001)the Foundation of China Scholarship Council(No.202306830079)。
文摘Currently,there are a limited number of dynamic models available for braided composite plates with large overall motions,despite the incorporation of three-dimensional(3D)braided composites into rotating blade components.In this paper,a dynamic model of 3D 4-directional braided composite thin plates considering braiding directions is established.Based on Kirchhoff's plate assumptions,the displacement variables of the plate are expressed.By incorporating the braiding directions into the constitutive equation of the braided composites,the dynamic model of the plate considering braiding directions is obtained.The effects of the speeds,braiding directions,and braided angles on the responses of the plate with fixed-axis rotation and translational motion,respectively,are investigated.This paper presents a dynamic theory for calculating the deformation of 3D braided composite structures undergoing both translational and rotational motions.It also provides a simulation method for investigating the dynamic behavior of non-isotropic material plates in various applications.
文摘Liposarcoma is one of the most common soft tissue sarcomas,however,its occurrence rate is still rare compared to other cancers.Due to its rarity,in vitro experiments are an essential approach to elucidate liposarcoma pathobiology.Conventional cell culture-based research(2D cell culture)is still playing a pivotal role,while several shortcomings have been recently under discussion.In vivo,mouse models are usually adopted for pre-clinical analyses with expectations to overcome the issues of 2D cell culture.However,they do not fully recapitulate human dedifferentiated liposarcoma(DDLPS)characteristics.Therefore,three-dimensional(3D)culture systems have been the recent research focus in the cell biology field with the expectation to overcome at the same time the disadvantages of 2D cell culture and in vivo animal models and fill in the gap between them.Given the liposarcoma rarity,we believe that 3D cell culture techniques,including 3D cell cultures/co-cultures,and Patient-Derived tumor Organoids(PDOs),represent a promising approach to facilitate liposarcoma investigation and elucidate its molecular mechanisms and effective therapy development.In this review,we first provide a general overview of 3D cell cultures compared to 2D cell cultures.We then focus on one of the recent 3D cell culture applications,Patient-Derived Organoids(PDOs),summarizing and discussing several PDO methodologies.Finally,we discuss the current and future applications of PDOs to sarcoma,particularly in the field of liposarcoma.
基金Supported by the National Science and Technology Major Project(2017ZX05001)CNPC Technology Project(2023YQX20111).
文摘To address the discrepancies between well and seismic data in stratigraphic correlation of the Triassic Yanchang Formation in the Ordos Basin,NW China,traditional stratigraphic classification schemes,the latest 3D seismic and drilling data,and reservoir sections are thoroughly investigated.Guided by the theory of sequence stratigraphy,the progradational sequence stratigraphic framework of the Yanchang Formation is systematically constructed to elucidate new deposition mechanisms in the depressed lacustrine basin,and it has been successfully applied to the exploration and development practices in the Qingcheng Oilfield.Key findings are obtained in three aspects.First,the seismic progradational reflections,marker tuff beds,and condensed sections of flooding surfaces in the Yanchang Formation are consistent and isochronous.Using flooding surface markers as a reference,a progradational sequence stratigraphic architecture is reconstructed for the middle-upper part of Yanchang Formation,and divided into seven clinoform units(CF1-CF7).Second,progradation predominantly occurs in semi-deep to deep lake environments,with the depositional center not always coinciding with the thickest strata.The lacustrine basin underwent an evolution of“oscillatory regression-progradational infilling-multi-phase superimposition”.Third,the case study of Qingcheng Oilfield reveals that the major pay zones consist of“isochronous but heterochronous”gravity-flow sandstone complexes.Guided by the progradational sequence stratigraphic architecture,horizontal well oil-layer penetration rates remain above 82%.The progradational sequence stratigraphic architecture and associated geological insights are more consistent with the sedimentary infilling mechanisms of large-scale continental depressed lacustrine basins and actual drilling results.The research results provide crucial theoretical and technical support for subsequent refined exploration and development of the Yanchang Formation,and are expected to offer a reference for research and production practice in similar continental lacustrine basins.
基金supported by grants from the Zhejiang Provincial Natural Science Foundation(LGJ22H180001)Zhejiang Medical and Health Science and Technology Project(2021KY249)the National Key R&D Program of China(2017YFC1310000).
文摘Attempts have been made to modulate motor sequence learning(MSL)through repetitive transcranial magnetic stimulation,targeting different sites within the sensorimotor network.However,the target with the optimum modulatory effect on neural plasticity associated with MSL remains unclarified.This study was therefore designed to compare the role of the left primary motor cortex and the left supplementary motor area proper(SMAp)in modulating MSL across different complexity levels and for both hands,as well as the associated neuroplasticity by applying intermittent theta burst stimulation together with the electroencephalogram and concurrent transcranial magnetic stimulation.Our data demonstrated the role of SMAp stimulation in modulating neural communication to support MSL,which is achieved by facilitating regional activation and orchestrating neural coupling across distributed brain regions,particularly in interhemispheric connections.These findings may have important clinical implications,particularly for motor rehabilitation in populations such as post-stroke patients.
