The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the pr...The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the propagation characteristics of gravity waves(GWs) over Northwest China. We found that obvious seasonal variations occur in the propagation of GWs. In spring, GWs mainlypropagate in the northeast direction. In summer and autumn, GWs mainly propagate in the north direction. However, GWs mainlypropagate in the south direction in winter. The direction of GW propagation in the zonal direction is controlled by the wind-filteringeffect, whereas the north–south meridional direction is mainly determined by the location of the wave source. We found that the averageenergy spectrum exhibits a 10%–20% higher intensity in summer and winter compared with spring and autumn. For the first time, wereport the seasonal variation characteristics of GWs over the inland areas of Northwest China, which is of great significance forunderstanding the regional distribution characteristics of GWs.展开更多
Objective:To evaluate the clinical efficacy of blood-letting cupping combined with manual lymphatic drainage in treating breast cancer-related lymphedema(BCRL)and explore its mechanism of action from both traditional ...Objective:To evaluate the clinical efficacy of blood-letting cupping combined with manual lymphatic drainage in treating breast cancer-related lymphedema(BCRL)and explore its mechanism of action from both traditional Chinese medicine and modern medical perspectives,providing a scientific basis and novel therapeutic approaches for clinical management of BCRL.Methods:Patients with BCRL admitted to the outpatient and inpatient departments of Hebei University Affiliated Hospital were enrolled.A prospective randomized controlled trial design was adopted,with eligible patients randomly assigned to a treatment group and a control group.The control group received manual lymphatic drainage alone,while the treatment group received manual lymphtic drainage combined with blood-letting cupping therapy.Posttreatment comparisons evaluated upper limb circumference reduction,edema severity grading,and upper limb functional scores.Vital signs and adverse reactions during treatment were recorded for both groups.Statistical software analyzed the data.Results:The treatment group demonstrated significantly greater reduction in upper limb circumference,improvement in edema severity,and higher upper limb function scores compared to the control group(P<0.05).Vital signs remained stable throughout treatment in both groups.No severe adverse reactions occurred in the treatment group;only isolated cases of mild skin itching were reported,which resolved after symptomatic management.Conclusion:The combination of bloodletting cupping and manual lymphatic drainage demonstrates reliable efficacy in treating BCRL,effectively alleviating edema symptoms and improving upper limb function with high safety.Its mechanism may relate to traditional Chinese medicine principles of“unblocking meridians,promoting blood circulation,and resolving stasis”and modern medical concepts of“enhancing local blood circulation,facilitating lymphatic drainage,and reducing inflammatory responses”.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
Here we report on simultaneous lidar observations of sporadic Ni(Nis)layers and sporadic Na(Nas)layers in the atmosphere over Yanqing,Beijing(40.42°N,116.02°E)from April 2019 to October 2022.During 343 night...Here we report on simultaneous lidar observations of sporadic Ni(Nis)layers and sporadic Na(Nas)layers in the atmosphere over Yanqing,Beijing(40.42°N,116.02°E)from April 2019 to October 2022.During 343 nights of observation,68 Nis and 56 Nas were observed.The seasonal variation of Nis and Nas was also obtained,with the highest occurrence of Nis being in July(43%)and that of Nas being in June(61%).We found that the seasonal variation of Nis is similar to that of Nas and that both occur more frequently in summer than in winter.In addition,we found 23 events in which Nis and Nas occur simultaneously.The average peak altitude of Nas is approximately 1 km higher than that of Nis,and the peak density ratio of Nas to Nis is approximately 5,which is half the density ratio of the two main layers.Additionally,the strength factor for Nas is smaller than that for Nis.Through data analysis of sporadic E layers(Es),we found that Nis and Nas has a significant correlation with Es.The neutralization rates of Ni^(+)/Na^(+)were calculated according to the dissociative recombination reaction of Ni^(+)/Na^(+)and the WACCM-Ni(Whole Atmosphere Community Climate Model of Ni).The production rates of Ni and Na were estimated to be approximately 1:4.4,which is consistent with the density ratio of Nis to Nas.The results showed that the neutralization reaction of Ni+,Na+,and electrons in Es is the main reason for the formation of the Nis layer and the Nas layer.展开更多
Lithium metal batteries(LMBs)represent a promising solution for next-generation energy storage due to their high energy density,but the growth of lithium dendrites presents significant challenges to their performance ...Lithium metal batteries(LMBs)represent a promising solution for next-generation energy storage due to their high energy density,but the growth of lithium dendrites presents significant challenges to their performance and safety.This review provides a comprehensive overview of the mechanisms behind lithium dendrite formation and the role of in situ/operando observation and phase field simulation in understanding and mitigating this issue,The key driving factors of dendrite growth,such as lithium-ion flux heterogeneity,surface defects,and localized stress,are explored through advanced experimental techniques,which enable real-time visualization of dendrite nucleation and growth dynamics.Complementarily,phase field simulations provide insights into subsurface and temporal evolution of dendrites by modeling thermodynamic and kinetic processes,while machine learning techniques optimize simulation accuracy through data-driven parameter refinement.The integration of experimental observations with simulation models holds great potential in improving understanding and predictive capabilities.Despite ongoing progress,challenges remain in resolving technical limitations in observation techniques,improving computational efficiency,and fostering interdisciplinary collaboration.This review highlights the synergy between experimental and computational strategies in advancing the development of LMBs and calls for continued research to overcome existing hurdles and unlock the full potential of lithium metal anodes.展开更多
Intercepting high-maneuverability hypersonic targets in near-space environments poses significant challenges due to their extreme speeds and evasive capabilities.To address these challenges,this study presents an inte...Intercepting high-maneuverability hypersonic targets in near-space environments poses significant challenges due to their extreme speeds and evasive capabilities.To address these challenges,this study presents an integrated approach that combines a Three-Dimensional Finite-Time Optimal Cooperative Guidance Law(FTOC)with an Information Fusion Anti-saturation Predefined-time Observer(IFAPO).The proposed FTOC guidance law employs a nonlinear,non-quadratic finite-time optimal control strategy designed for rapid convergence within the limited timeframes of near-space interceptions,avoiding the need for remaining flight time estimation or linear decoupling inherent in traditional methods.To complement the guidance strategy,the IFAPO leverages multi-source information fusion theory and incorporates anti-saturation mechanisms to enhance target maneuver estimation.This method ensures accurate and real-time prediction of target acceleration while maintaining predefined convergence performance,even under complex interception conditions.By integrating the FTOC guidance law and IFAPO,the approach optimizes cooperative missile positioning,improves interception success rates,and minimizes fuel consumption,addressing practical constraints in military applications.Simulation results and comparative analyses confirm the effectiveness of the integrated approach,demonstrating its capability to achieve cooperative interception of highly maneuvering targets with enhanced efficiency and reduced economic costs,aligning with realistic combat scenarios.展开更多
The spatial variability in the atmospheric CO_(2)and CH_(4)concentrations in urban land is affected by the source type,source distribution,and emission intensity in the cityscape.In this study,we analyzed vehicle-moun...The spatial variability in the atmospheric CO_(2)and CH_(4)concentrations in urban land is affected by the source type,source distribution,and emission intensity in the cityscape.In this study,we analyzed vehicle-mounted measurements of street-level CO_(2)and CH_(4)concentrations in Hangzhou—a large metropolitan area in the Yangtze River Delta in eastern China.The results revealed that CO_(2)and CH_(4)emission hotspots did not overlap geographically,with the former occurring as linear features at elevated road intersections and expressways and the latter occurring at waste treatment facilities(sewage treatment plants and landfills).The CH_(4):CO_(2)emission ratios(ppb ppm^(-1))were ranked in increasing order as follows:traffic(1.01±1.82;mean±1 SD);overall(3.46±2.71);sewage treatment(12.76±2.50);and landfill(36.50±10.15).Waste treatment was largely responsible for the increased overall emission ratio,supporting this source category as a major contributor to the CH_(4)budget in this city and suggesting a negligible role of domestic appliances(cookstoves and water heaters).A two-source mixing model calculation indicated that 99.9%of nonelectric vehicles in Hangzhou were gasoline-powered,revealing a recent shift in vehicle fuel composition from gasoline/natural gas to gasoline/electricity.The methodology established in this study is applicable to cities elsewhere.展开更多
Changes in the water cycle on the Tibetan Plateau(TP)have a significant impact on local agricultural production and livelihoods and its downstream regions.Against the background of widely reported warming and wetting,...Changes in the water cycle on the Tibetan Plateau(TP)have a significant impact on local agricultural production and livelihoods and its downstream regions.Against the background of widely reported warming and wetting,the hydrological cycle has accelerated and the likelihood of extreme weather events and natural disasters occurring(i.e.,snowstorms,floods,landslides,mudslides,and ice avalanches)has also intensified,especially in the highelevation mountainous regions.Thus,an accurate estimation of the intensity and variation of each component of the water cycle is an urgent scientific question for the assessment of plateau environmental changes.Following the transformation and movement of water between the atmosphere,biosphere and hydrosphere,the authors highlight the urgent need to strengthen the three-dimensional comprehensive observation system(including the eddy covariance system;planetary boundary layer tower;profile measurements of temperature,humidity,and wind by microwave radiometers,wind profiler,and radiosonde system;and cloud and precipitation radars)in the TP region and propose a practical implementation plan.The construction of such a three-dimensional observation system is expected to promote the study of environmental changes and natural hazards prevention.展开更多
Objective： To evaluate the clinical effect of gemcitabine and concurrent three-dimensional conformal radiation therapy （3D-CRT） for locally advanced non-small cell lung cancer （NSCLC）. Methods： From April 2002 t...Objective： To evaluate the clinical effect of gemcitabine and concurrent three-dimensional conformal radiation therapy （3D-CRT） for locally advanced non-small cell lung cancer （NSCLC）. Methods： From April 2002 to June 2005, 38 patients with inoperable stage Ⅲ NSCLC were treated with gemcitabine and 3D-CRT simultaneously. Chemotherapy consisted of intravenously gemcitabine 350 mg/m^2 on days 1, 8, 15, 22, 29, 36.3D-CRT was delivered up to a total dose of 60-64 Gy with a 2.0 Gy dose fraction per day, 5 days per week. Results： The overall response rates of primary tumor and mediastinum metastatic node were 86.8% （33/38） and 90.6% （29/32） respectively, and 91.7% （22/24） and 78.6% （11/14） for squamous cell carcinoma and adenocarcinoma respectively. The acute side effects of patients were mostly myelosuppression, nausea, vomiting, radiation-induced esophagitis and pneumonitis （RTOG 1/11）, however, all of them were cured. Conclusion： Concurrent application of gemcitabine and 3D-CRT can improve the overall response rate for locally advanced NSCLC without aggravating the side effects.展开更多
This article investigates the optimal observation configuration of unmanned aerial vehicles(UAVs) based on angle and range measurements, and generalizes predecessors' researches in two dimensions into three dimens...This article investigates the optimal observation configuration of unmanned aerial vehicles(UAVs) based on angle and range measurements, and generalizes predecessors' researches in two dimensions into three dimensions. The relative geometry of the UAVs-target will significantly affect the state estimation performance of the target, the cost function based on the Fisher information matrix(FIM) is used to derive the FIM determinant of UAVs' observation in three-dimensional space, and the optimal observation geometric configuration that maximizes the determinant of the FIM is obtained. It is shown that the optimal observation configuration of the UAVs-target is usually not unique, and the optimal observation configuration is proved for two UAVs and three UAVs in three-dimension. The long-range over-the-horizon target tracking is simulated and analyzed based on the analysis of optimal observation configuration for two UAVs. The simulation results show that the theoretical analysis and control algorithm can effectively improve the positioning accuracy of the target. It can provide a helpful reference for the design of over-the-horizon target localization based on UAVs.展开更多
In this study,a moored array optimization tool(MAOT)was developed and applied to the South China Sea(SCS)with a focus on three-dimensional temperature and salinity observations.Application of the MAOT involves two ste...In this study,a moored array optimization tool(MAOT)was developed and applied to the South China Sea(SCS)with a focus on three-dimensional temperature and salinity observations.Application of the MAOT involves two steps:(1)deriving a set of optimal arrays that are independent of each other for different variables at different depths based on an empirical orthogonal function method,and(2)consolidating these arrays using a K-center clustering algorithm.Compared with the assumed initial array consisting of 17 mooring sites located on a 3°×3°horizontal grid,the consolidated array improved the observing ability for three-dimensional temperature and salinity in the SCS with optimization efficiencies of 19.03%and 21.38%,respectively.Experiments with an increased number of moored sites showed that the most cost-effective option is a total of 20 moorings,improving the observing ability with optimization efficiencies up to 26.54%for temperature and 27.25%for salinity.The design of an objective array relies on the ocean phenomenon of interest and its spatial and temporal scales.In this study,we focus on basin-scale variations in temperature and salinity in the SCS,and thus our consolidated array may not well resolve mesoscale processes.The MAOT can be extended to include other variables and multi-scale variability and can be applied to other regions.展开更多
Objective： The aim of our study was to explore the shortterm efficacy of platinumbased combined with concur rent chemoradiotherapy for locally advanced nonsmallcell lung cancer （NSCLC）. Methods： Between 2006 to 20...Objective： The aim of our study was to explore the shortterm efficacy of platinumbased combined with concur rent chemoradiotherapy for locally advanced nonsmallcell lung cancer （NSCLC）. Methods： Between 2006 to 2010, 78 cases of locally advanced NSCLC were enrolled into this trial. All patients were given platinumbased chemotherapy combined with concurrent threedimensional conformal radiotherapy （3DCRT）. Chest CT scans were obtained during endexpiratory and endinspiratory pauses when performing positioning. Image fusion was done after the image data was transferred to treat ment plan system （TPS）. The target volume was delineated on the fusion images. The chemotherapy was given on the first day of radiotherapy. Comprehensive examinations were conducted 46 weeks after concurrent chemoradiotherapy to assess shortterm efficacy. Results： Complete remission （CR） was achieved in 8 cases and partial remission （PR） in 54 cases. The efficiency rate reached 79.5%. Grade IllIV radiation esophagitis occurred in 11.5%. No exit and death cases during treat ment. Conclusion： Concurrent chemoradiotherapy could significantly improve the shortterm efficacy and prolong survival of stage III NSCLC, meanwhile the adverse reactions could be tolerated.展开更多
Objective:The aim of the study was to investigate the efficacy of three-dimensional conformal radiotherapy (3D-CRT) combined with Temozolomide (TMZ) concurrent chemotherapy in treatment of postoperative cerebral gliom...Objective:The aim of the study was to investigate the efficacy of three-dimensional conformal radiotherapy (3D-CRT) combined with Temozolomide (TMZ) concurrent chemotherapy in treatment of postoperative cerebral gliomas by prospective randomized controlled trials. Methods: Sixty-two patients with cerebral glioma who had residual tumor were divided into 3D-CRT group (radiotherapy group, n=31) and 3D-CRT with concurrent chemotherapy group (chemoradiotherapy group, n=31) prospectively. All patients received a dose of 50-60 Gy/25-30 F/5-6 weeks by 6 MV-X ray, three-dimensional conformal radiotherapy, 1 f/d, 5 times a week. Chemotherapy regimen was Temozolomide:75 mg/m2/d, concomitantly with radiotherapy, followed by 150-200 mg/m2/d, 5 days, 28 days per cycle, totally 3-6 cycles. Results: The total response rate was 35.3% (11/31) in radiotherapy group. The response rate was 61.3% (19/31) in chemoradiotherapy group. There was significant difference in curative effect (P=0.042). There was no significant difference in survival comparison of two groups (P=0.263). Stratified analysis showed the patients with grade Ⅲ gliomas of chemoradiotherapy group had better prognosis than ones of radiotherapy group (P=0.043). Conclusion: The 3D-CRT with concurrent chemotherapy can improve the survival of cerebral gliomas with pathological grade Ⅲ.展开更多
The characteristics of nonmetallic inclusions formed during steel production have a significant influence on steel performance.In this paper,studies on inclusions using confocal scanning laser microscopy(CSLM)are revi...The characteristics of nonmetallic inclusions formed during steel production have a significant influence on steel performance.In this paper,studies on inclusions using confocal scanning laser microscopy(CSLM)are reviewed and summarized,particularly the col-lision of various inclusions,dissolution of inclusions in liquid slag,and reactions between inclusions and steel.Solid inclusions exhibited a high collision tendency,whereas pure liquid inclusions exhibited minimal collisions because of the small attraction force induced by their<90°contact angle with molten steel.The collision of complex inclusions in molten steel was not included in the scope of this study and should be evaluated in future studies.Higher CaO/Al_(2)O_(3)and CaO/SiO_(2)ratios in liquid slag promoted the dissolution of Al_(2)O_(3)-based in-clusions.The formation of solid phases in the slag should be prevented to improve dissolution of inclusions.To accurately simulate the dissolution of inclusions in liquid slag,in-situ observation of the dissolution of inclusions at the steel-slag interface is necessary.Using a combination of CSLM and scanning electron microscopy-energy dispersive spectroscopy,the composition and morphological evolution of the inclusions during their modification by the dissolved elements in steel were observed and analyzed.Although the in-situ observa-tion of MnS and TiN precipitations has been widely studied,the in-situ observation of the evolution of oxide inclusions in steel during so-lidification and heating processes has rarely been reported.The effects of temperature,heating and cooling rates,and inclusion character-istics on the formation of acicular ferrites(AFs)have been widely studied.At a cooling rate of 3-5 K/s,the order of AF growth rate in-duced by different inclusions,as reported in literature,is Ti-O<Ti-Ca-Zr-Al-O<Mg-O<Ti-Zr-Al-O<Mn-Ti-Al-O<Ti-Al-O<Zr-Ti-Al-O.Further comprehensive experiments are required to investigate the quantitative relationship between the formation of AFs and inclusions.展开更多
As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014...As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014,an anticyclonic eddy located at 135°E-155°E,26°N-42°N was observed using 17 rapidsampling Argo floats,and the spatiotemporal variations in the three-dimensional structure were studied.The results are as follows:(1)the eddy was identified and tracked using satellite altimeter data.It had a lifetime of 269 days and an average radius of 91.5 km.The lifetime of the eddy can be divided into three phases,i.e.,the initiation,maturity,and termination phases.The depth of its influence reached 1000 m;(2)the Argo profiles were divided into seven periods(approximately 20 days in each)for composite analysis,and the composite Argo profiles and CARS2009(CSIRO Atlas of Regional Seas)climatology data were merged following the data-interpolating variational analysis(DIVA)method to reconstruct the three-dimensional structure.The temperature and salinity anomaly cores of the anticyclonic mesoscale eddy are located from 400 to 600 m.From 800 to 900 m,there is an area of low salinity at the center of the eddy.A high concentration anomaly of dissolved oxygen was located at approximately 250 m;(3)to better understand the features of the eddy and its interaction with the surroundings,we calculated the anomalous velocity of the geostrophic flow and the heat,salt,dissolved oxygen transport anomaly,and discussed the eddy's origin and its adjustments to topography.The maximum heat,salt,and oxygen transport caused by eddy were 9.37×10^11 W,3.08×10^3 kg/s,and 2.70×10^2 kg/s,which all occurred during the termination phase.This study highlights the applicability of using Argo floats to understand the three-dimensional structure thermohaline features of eddies in the North Pacific.展开更多
To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D lea...To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.展开更多
Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significan...Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.展开更多
BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution ki...The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution kinetics of primary carbides during either heating or soaking.Dissolution of carbides proceeded in three stages(fast→slow→faster)as either temperature or holding time was increased.During the heating process and during the first and third stages of the soaking process,the original size of the carbides determined the steepness of the slope,but during the middle(“slow”)stage of the soaking process,the slope remained zero.The initial size of the carbides varied greatly,but their final dissolution temperature fell within the narrow range of 1210-1235℃,and the holding time remained within 50 min.Fractal analysis was used to study the morphological characteristics of small and medium-sized carbides during the dissolution process.According to changes in the fractal dimension before and after soaking,the carbides tended to evolve towards a more regular morphology.展开更多
Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targete...Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targeted observations for individual eddies.A cyclonic eddy surveyed during an oceanographic cruise in the Northwest Pacific Ocean is investigated in this study.The three-dimensional structure of this cyclonic eddy is revealed by observations and simulated by the four-dimensional variational data assimilation(4 DVAR)system combined with the Regional Ocean Modeling System.The observation and assimilation results together present the characteristics of the cyclonic eddy.The cold eddy has an obvious dual-core structure of temperature anomaly.One core is at 50–150 m and another is at 300–550 m,which both have the average temperature anomaly of approximately-3.5℃.The salinity anomaly core is between 250 m and 500 m,which is approximately-0.3.The horizontal velocity structure is axis-asymmetric and it is enhanced on the eastern side of the cold eddy.In the assimilation experiment,sea level anomaly,sea surface temperature,and in situ measurements are assimilated into the system,and the results of assimilation are close to the observations.Based on the high-resolution assimilation output results,the study also diagnoses the vertical velocity in the mesoscale eddy,which reaches the maximum of approximately 10 m/d.The larger vertical velocity is found to be distributed in the range of 0.5 to 1 time of the normalized radius of the eddy.The validation of the simulation result shows that the 4 DVAR method is effective to reconstruct the three-dimensional structure of mesoscale eddy and the research is an application to study the mesoscale eddy in the Northwest Pacific by combining observation and assimilation methods.展开更多
基金supported by the National Science Foundation of China(Grant Nos.42374205 and 41974179)the Specialized Research Fund of the National Space Science Center,Chinese Academy of Sciences(Grant No.E4PD3010)supported by the Specialized Research Fund for State Key Laboratories.
文摘The three-dimensional spectral analysis method was applied to airglow data from September 2023 to August 2024 derivedfrom an OH airglow imager located at the Hejing station (42.79°N, 83.73°E) to study the propagation characteristics of gravity waves(GWs) over Northwest China. We found that obvious seasonal variations occur in the propagation of GWs. In spring, GWs mainlypropagate in the northeast direction. In summer and autumn, GWs mainly propagate in the north direction. However, GWs mainlypropagate in the south direction in winter. The direction of GW propagation in the zonal direction is controlled by the wind-filteringeffect, whereas the north–south meridional direction is mainly determined by the location of the wave source. We found that the averageenergy spectrum exhibits a 10%–20% higher intensity in summer and winter compared with spring and autumn. For the first time, wereport the seasonal variation characteristics of GWs over the inland areas of Northwest China, which is of great significance forunderstanding the regional distribution characteristics of GWs.
文摘Objective:To evaluate the clinical efficacy of blood-letting cupping combined with manual lymphatic drainage in treating breast cancer-related lymphedema(BCRL)and explore its mechanism of action from both traditional Chinese medicine and modern medical perspectives,providing a scientific basis and novel therapeutic approaches for clinical management of BCRL.Methods:Patients with BCRL admitted to the outpatient and inpatient departments of Hebei University Affiliated Hospital were enrolled.A prospective randomized controlled trial design was adopted,with eligible patients randomly assigned to a treatment group and a control group.The control group received manual lymphatic drainage alone,while the treatment group received manual lymphtic drainage combined with blood-letting cupping therapy.Posttreatment comparisons evaluated upper limb circumference reduction,edema severity grading,and upper limb functional scores.Vital signs and adverse reactions during treatment were recorded for both groups.Statistical software analyzed the data.Results:The treatment group demonstrated significantly greater reduction in upper limb circumference,improvement in edema severity,and higher upper limb function scores compared to the control group(P<0.05).Vital signs remained stable throughout treatment in both groups.No severe adverse reactions occurred in the treatment group;only isolated cases of mild skin itching were reported,which resolved after symptomatic management.Conclusion:The combination of bloodletting cupping and manual lymphatic drainage demonstrates reliable efficacy in treating BCRL,effectively alleviating edema symptoms and improving upper limb function with high safety.Its mechanism may relate to traditional Chinese medicine principles of“unblocking meridians,promoting blood circulation,and resolving stasis”and modern medical concepts of“enhancing local blood circulation,facilitating lymphatic drainage,and reducing inflammatory responses”.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
基金supported by the Specialized Research Fund for State Key Laboratories,Chinese Meridian Project,the Specialized Research Fund for the State Key Laboratory of Solar Activity and Space Weather,postgraduate Education Reform and Quality Improvement Project of Henan Province(Grant No.YJS2024JD32)Natural Science Foundation Project of Henan Province(Grant No.242300420253)National Natural Science Foundation of China for Young Scientists(Grant No.42504156)funding.
文摘Here we report on simultaneous lidar observations of sporadic Ni(Nis)layers and sporadic Na(Nas)layers in the atmosphere over Yanqing,Beijing(40.42°N,116.02°E)from April 2019 to October 2022.During 343 nights of observation,68 Nis and 56 Nas were observed.The seasonal variation of Nis and Nas was also obtained,with the highest occurrence of Nis being in July(43%)and that of Nas being in June(61%).We found that the seasonal variation of Nis is similar to that of Nas and that both occur more frequently in summer than in winter.In addition,we found 23 events in which Nis and Nas occur simultaneously.The average peak altitude of Nas is approximately 1 km higher than that of Nis,and the peak density ratio of Nas to Nis is approximately 5,which is half the density ratio of the two main layers.Additionally,the strength factor for Nas is smaller than that for Nis.Through data analysis of sporadic E layers(Es),we found that Nis and Nas has a significant correlation with Es.The neutralization rates of Ni^(+)/Na^(+)were calculated according to the dissociative recombination reaction of Ni^(+)/Na^(+)and the WACCM-Ni(Whole Atmosphere Community Climate Model of Ni).The production rates of Ni and Na were estimated to be approximately 1:4.4,which is consistent with the density ratio of Nis to Nas.The results showed that the neutralization reaction of Ni+,Na+,and electrons in Es is the main reason for the formation of the Nis layer and the Nas layer.
基金the financial support of the National Natural Science Foundation of China(Nos.12172206 and 11972218)。
文摘Lithium metal batteries(LMBs)represent a promising solution for next-generation energy storage due to their high energy density,but the growth of lithium dendrites presents significant challenges to their performance and safety.This review provides a comprehensive overview of the mechanisms behind lithium dendrite formation and the role of in situ/operando observation and phase field simulation in understanding and mitigating this issue,The key driving factors of dendrite growth,such as lithium-ion flux heterogeneity,surface defects,and localized stress,are explored through advanced experimental techniques,which enable real-time visualization of dendrite nucleation and growth dynamics.Complementarily,phase field simulations provide insights into subsurface and temporal evolution of dendrites by modeling thermodynamic and kinetic processes,while machine learning techniques optimize simulation accuracy through data-driven parameter refinement.The integration of experimental observations with simulation models holds great potential in improving understanding and predictive capabilities.Despite ongoing progress,challenges remain in resolving technical limitations in observation techniques,improving computational efficiency,and fostering interdisciplinary collaboration.This review highlights the synergy between experimental and computational strategies in advancing the development of LMBs and calls for continued research to overcome existing hurdles and unlock the full potential of lithium metal anodes.
基金supported by the National Natural Science Foundation of China(Grant No.61773142).
文摘Intercepting high-maneuverability hypersonic targets in near-space environments poses significant challenges due to their extreme speeds and evasive capabilities.To address these challenges,this study presents an integrated approach that combines a Three-Dimensional Finite-Time Optimal Cooperative Guidance Law(FTOC)with an Information Fusion Anti-saturation Predefined-time Observer(IFAPO).The proposed FTOC guidance law employs a nonlinear,non-quadratic finite-time optimal control strategy designed for rapid convergence within the limited timeframes of near-space interceptions,avoiding the need for remaining flight time estimation or linear decoupling inherent in traditional methods.To complement the guidance strategy,the IFAPO leverages multi-source information fusion theory and incorporates anti-saturation mechanisms to enhance target maneuver estimation.This method ensures accurate and real-time prediction of target acceleration while maintaining predefined convergence performance,even under complex interception conditions.By integrating the FTOC guidance law and IFAPO,the approach optimizes cooperative missile positioning,improves interception success rates,and minimizes fuel consumption,addressing practical constraints in military applications.Simulation results and comparative analyses confirm the effectiveness of the integrated approach,demonstrating its capability to achieve cooperative interception of highly maneuvering targets with enhanced efficiency and reduced economic costs,aligning with realistic combat scenarios.
基金supported by the National Natural Science Foundation of China(Grant Nos.U24A20590,42021004)the Joint funds of the Zhejiang Provincial NaturalScienceFoundationofChina(GrantNo.LZJMZ23D050002)+2 种基金the 333 Project of Jiangsu Province(Grant No.BRA2022023)the Natural Science Foundation of Jiangsu Province for Distinguished Young Scholars(Grant No.BK20220055)the Key Laboratory of Ecosystem Carbon Source and Sink,China Meteorological Administration(Grant No.ECSS-CMA202302)。
文摘The spatial variability in the atmospheric CO_(2)and CH_(4)concentrations in urban land is affected by the source type,source distribution,and emission intensity in the cityscape.In this study,we analyzed vehicle-mounted measurements of street-level CO_(2)and CH_(4)concentrations in Hangzhou—a large metropolitan area in the Yangtze River Delta in eastern China.The results revealed that CO_(2)and CH_(4)emission hotspots did not overlap geographically,with the former occurring as linear features at elevated road intersections and expressways and the latter occurring at waste treatment facilities(sewage treatment plants and landfills).The CH_(4):CO_(2)emission ratios(ppb ppm^(-1))were ranked in increasing order as follows:traffic(1.01±1.82;mean±1 SD);overall(3.46±2.71);sewage treatment(12.76±2.50);and landfill(36.50±10.15).Waste treatment was largely responsible for the increased overall emission ratio,supporting this source category as a major contributor to the CH_(4)budget in this city and suggesting a negligible role of domestic appliances(cookstoves and water heaters).A two-source mixing model calculation indicated that 99.9%of nonelectric vehicles in Hangzhou were gasoline-powered,revealing a recent shift in vehicle fuel composition from gasoline/natural gas to gasoline/electricity.The methodology established in this study is applicable to cities elsewhere.
基金This research was jointly funded by the Second Tibetan Plateau Scientific Expedition and Research Program(Grant Nos.2019QZKK0103 and 2019QZKK0105)the National Natural Science Foundation of China(Grant Nos.91837208 and 42075085).
文摘Changes in the water cycle on the Tibetan Plateau(TP)have a significant impact on local agricultural production and livelihoods and its downstream regions.Against the background of widely reported warming and wetting,the hydrological cycle has accelerated and the likelihood of extreme weather events and natural disasters occurring(i.e.,snowstorms,floods,landslides,mudslides,and ice avalanches)has also intensified,especially in the highelevation mountainous regions.Thus,an accurate estimation of the intensity and variation of each component of the water cycle is an urgent scientific question for the assessment of plateau environmental changes.Following the transformation and movement of water between the atmosphere,biosphere and hydrosphere,the authors highlight the urgent need to strengthen the three-dimensional comprehensive observation system(including the eddy covariance system;planetary boundary layer tower;profile measurements of temperature,humidity,and wind by microwave radiometers,wind profiler,and radiosonde system;and cloud and precipitation radars)in the TP region and propose a practical implementation plan.The construction of such a three-dimensional observation system is expected to promote the study of environmental changes and natural hazards prevention.
文摘Objective： To evaluate the clinical effect of gemcitabine and concurrent three-dimensional conformal radiation therapy （3D-CRT） for locally advanced non-small cell lung cancer （NSCLC）. Methods： From April 2002 to June 2005, 38 patients with inoperable stage Ⅲ NSCLC were treated with gemcitabine and 3D-CRT simultaneously. Chemotherapy consisted of intravenously gemcitabine 350 mg/m^2 on days 1, 8, 15, 22, 29, 36.3D-CRT was delivered up to a total dose of 60-64 Gy with a 2.0 Gy dose fraction per day, 5 days per week. Results： The overall response rates of primary tumor and mediastinum metastatic node were 86.8% （33/38） and 90.6% （29/32） respectively, and 91.7% （22/24） and 78.6% （11/14） for squamous cell carcinoma and adenocarcinoma respectively. The acute side effects of patients were mostly myelosuppression, nausea, vomiting, radiation-induced esophagitis and pneumonitis （RTOG 1/11）, however, all of them were cured. Conclusion： Concurrent application of gemcitabine and 3D-CRT can improve the overall response rate for locally advanced NSCLC without aggravating the side effects.
基金supported by the National Natural Science Foundation of China(61703419)。
文摘This article investigates the optimal observation configuration of unmanned aerial vehicles(UAVs) based on angle and range measurements, and generalizes predecessors' researches in two dimensions into three dimensions. The relative geometry of the UAVs-target will significantly affect the state estimation performance of the target, the cost function based on the Fisher information matrix(FIM) is used to derive the FIM determinant of UAVs' observation in three-dimensional space, and the optimal observation geometric configuration that maximizes the determinant of the FIM is obtained. It is shown that the optimal observation configuration of the UAVs-target is usually not unique, and the optimal observation configuration is proved for two UAVs and three UAVs in three-dimension. The long-range over-the-horizon target tracking is simulated and analyzed based on the analysis of optimal observation configuration for two UAVs. The simulation results show that the theoretical analysis and control algorithm can effectively improve the positioning accuracy of the target. It can provide a helpful reference for the design of over-the-horizon target localization based on UAVs.
基金The National Key Research and Development Program of China under contract No.2019YFC1408400the National Natural Science Foundation of China under contract No.41876029.
文摘In this study,a moored array optimization tool(MAOT)was developed and applied to the South China Sea(SCS)with a focus on three-dimensional temperature and salinity observations.Application of the MAOT involves two steps:(1)deriving a set of optimal arrays that are independent of each other for different variables at different depths based on an empirical orthogonal function method,and(2)consolidating these arrays using a K-center clustering algorithm.Compared with the assumed initial array consisting of 17 mooring sites located on a 3°×3°horizontal grid,the consolidated array improved the observing ability for three-dimensional temperature and salinity in the SCS with optimization efficiencies of 19.03%and 21.38%,respectively.Experiments with an increased number of moored sites showed that the most cost-effective option is a total of 20 moorings,improving the observing ability with optimization efficiencies up to 26.54%for temperature and 27.25%for salinity.The design of an objective array relies on the ocean phenomenon of interest and its spatial and temporal scales.In this study,we focus on basin-scale variations in temperature and salinity in the SCS,and thus our consolidated array may not well resolve mesoscale processes.The MAOT can be extended to include other variables and multi-scale variability and can be applied to other regions.
文摘Objective： The aim of our study was to explore the shortterm efficacy of platinumbased combined with concur rent chemoradiotherapy for locally advanced nonsmallcell lung cancer （NSCLC）. Methods： Between 2006 to 2010, 78 cases of locally advanced NSCLC were enrolled into this trial. All patients were given platinumbased chemotherapy combined with concurrent threedimensional conformal radiotherapy （3DCRT）. Chest CT scans were obtained during endexpiratory and endinspiratory pauses when performing positioning. Image fusion was done after the image data was transferred to treat ment plan system （TPS）. The target volume was delineated on the fusion images. The chemotherapy was given on the first day of radiotherapy. Comprehensive examinations were conducted 46 weeks after concurrent chemoradiotherapy to assess shortterm efficacy. Results： Complete remission （CR） was achieved in 8 cases and partial remission （PR） in 54 cases. The efficiency rate reached 79.5%. Grade IllIV radiation esophagitis occurred in 11.5%. No exit and death cases during treat ment. Conclusion： Concurrent chemoradiotherapy could significantly improve the shortterm efficacy and prolong survival of stage III NSCLC, meanwhile the adverse reactions could be tolerated.
文摘Objective:The aim of the study was to investigate the efficacy of three-dimensional conformal radiotherapy (3D-CRT) combined with Temozolomide (TMZ) concurrent chemotherapy in treatment of postoperative cerebral gliomas by prospective randomized controlled trials. Methods: Sixty-two patients with cerebral glioma who had residual tumor were divided into 3D-CRT group (radiotherapy group, n=31) and 3D-CRT with concurrent chemotherapy group (chemoradiotherapy group, n=31) prospectively. All patients received a dose of 50-60 Gy/25-30 F/5-6 weeks by 6 MV-X ray, three-dimensional conformal radiotherapy, 1 f/d, 5 times a week. Chemotherapy regimen was Temozolomide:75 mg/m2/d, concomitantly with radiotherapy, followed by 150-200 mg/m2/d, 5 days, 28 days per cycle, totally 3-6 cycles. Results: The total response rate was 35.3% (11/31) in radiotherapy group. The response rate was 61.3% (19/31) in chemoradiotherapy group. There was significant difference in curative effect (P=0.042). There was no significant difference in survival comparison of two groups (P=0.263). Stratified analysis showed the patients with grade Ⅲ gliomas of chemoradiotherapy group had better prognosis than ones of radiotherapy group (P=0.043). Conclusion: The 3D-CRT with concurrent chemotherapy can improve the survival of cerebral gliomas with pathological grade Ⅲ.
基金supported by the National Key R&D Program(No.2023YFB3709900)the National Nature Science Foundation of China(No.U22A20171)+2 种基金China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202315)the High Steel Center(HSC)at North China University of TechnologyUniversity of Science and Technology Beijing,China.
文摘The characteristics of nonmetallic inclusions formed during steel production have a significant influence on steel performance.In this paper,studies on inclusions using confocal scanning laser microscopy(CSLM)are reviewed and summarized,particularly the col-lision of various inclusions,dissolution of inclusions in liquid slag,and reactions between inclusions and steel.Solid inclusions exhibited a high collision tendency,whereas pure liquid inclusions exhibited minimal collisions because of the small attraction force induced by their<90°contact angle with molten steel.The collision of complex inclusions in molten steel was not included in the scope of this study and should be evaluated in future studies.Higher CaO/Al_(2)O_(3)and CaO/SiO_(2)ratios in liquid slag promoted the dissolution of Al_(2)O_(3)-based in-clusions.The formation of solid phases in the slag should be prevented to improve dissolution of inclusions.To accurately simulate the dissolution of inclusions in liquid slag,in-situ observation of the dissolution of inclusions at the steel-slag interface is necessary.Using a combination of CSLM and scanning electron microscopy-energy dispersive spectroscopy,the composition and morphological evolution of the inclusions during their modification by the dissolved elements in steel were observed and analyzed.Although the in-situ observa-tion of MnS and TiN precipitations has been widely studied,the in-situ observation of the evolution of oxide inclusions in steel during so-lidification and heating processes has rarely been reported.The effects of temperature,heating and cooling rates,and inclusion character-istics on the formation of acicular ferrites(AFs)have been widely studied.At a cooling rate of 3-5 K/s,the order of AF growth rate in-duced by different inclusions,as reported in literature,is Ti-O<Ti-Ca-Zr-Al-O<Mg-O<Ti-Zr-Al-O<Mn-Ti-Al-O<Ti-Al-O<Zr-Ti-Al-O.Further comprehensive experiments are required to investigate the quantitative relationship between the formation of AFs and inclusions.
基金Supported by the National Key R&D Program of China(No.2018YFC1406202)the National Natural Science Foundation of China(Nos.41830964,41976188,41605051)。
文摘As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014,an anticyclonic eddy located at 135°E-155°E,26°N-42°N was observed using 17 rapidsampling Argo floats,and the spatiotemporal variations in the three-dimensional structure were studied.The results are as follows:(1)the eddy was identified and tracked using satellite altimeter data.It had a lifetime of 269 days and an average radius of 91.5 km.The lifetime of the eddy can be divided into three phases,i.e.,the initiation,maturity,and termination phases.The depth of its influence reached 1000 m;(2)the Argo profiles were divided into seven periods(approximately 20 days in each)for composite analysis,and the composite Argo profiles and CARS2009(CSIRO Atlas of Regional Seas)climatology data were merged following the data-interpolating variational analysis(DIVA)method to reconstruct the three-dimensional structure.The temperature and salinity anomaly cores of the anticyclonic mesoscale eddy are located from 400 to 600 m.From 800 to 900 m,there is an area of low salinity at the center of the eddy.A high concentration anomaly of dissolved oxygen was located at approximately 250 m;(3)to better understand the features of the eddy and its interaction with the surroundings,we calculated the anomalous velocity of the geostrophic flow and the heat,salt,dissolved oxygen transport anomaly,and discussed the eddy's origin and its adjustments to topography.The maximum heat,salt,and oxygen transport caused by eddy were 9.37×10^11 W,3.08×10^3 kg/s,and 2.70×10^2 kg/s,which all occurred during the termination phase.This study highlights the applicability of using Argo floats to understand the three-dimensional structure thermohaline features of eddies in the North Pacific.
文摘To address the problem of multi-missile cooperative interception against maneuvering targets at a prespecified impact time and desired Line-of-Sight(LOS)angles in ThreeDimensional(3D)space,this paper proposes a 3D leader-following cooperative interception guidance law.First,in the LOS direction of the leader,an impact time-controlled guidance law is derived based on the fixed-time stability theory,which enables the leader to complete the interception task at a prespecified impact time.Next,in the LOS direction of the followers,by introducing a time consensus tracking error function,a fixed-time consensus tracking guidance law is investigated to guarantee the consensus tracking convergence of the time-to-go.Then,in the direction normal to the LOS,by combining the designed global integral sliding mode surface and the second-order Sliding Mode Control(SMC)theory,an innovative 3D LOS-angle-constrained interception guidance law is developed,which eliminates the reaching phase in the traditional sliding mode guidance laws and effectively saves energy consumption.Moreover,it effectively suppresses the chattering phenomenon while avoiding the singularity issue,and compensates for unknown interference caused by target maneuvering online,making it convenient for practical engineering applications.Finally,theoretical proof analysis and multiple sets of numerical simulation results verify the effectiveness,superiority,and robustness of the investigated guidance law.
基金supported by the National Science Fund for Distinguished Young Scholars(42225107)the National Natural Science Foundation of China(42001326,42371414,42171409,and 42271419)+1 种基金the Natural Science Foundation of Guangdong Province of China(2022A1515012207)the Basic and Applied Basic Research Project of Guangzhou Science and Technology Planning(202201011539)。
文摘Three-dimensional(3D)urban structures play a critical role in informing climate mitigation strategies aimed at the built environment and facilitating sustainable urban development.Regrettably,there exists a significant gap in detailed and consistent data on 3D building space structures with global coverage due to the challenges inherent in the data collection and model calibration processes.In this study,we constructed a global urban structure(GUS-3D)dataset,including building volume,height,and footprint information,at a 500 m spatial resolution using extensive satellite observation products and numerous reference building samples.Our analysis indicated that the total volume of buildings worldwide in2015 exceeded 1×10^(12)m^(3).Over the 1985 to 2015 period,we observed a slight increase in the magnitude of 3D building volume growth(i.e.,it increased from 166.02 km3 during the 1985–2000 period to 175.08km3 during the 2000–2015 period),while the expansion magnitudes of the two-dimensional(2D)building footprint(22.51×10^(3) vs 13.29×10^(3)km^(2))and urban extent(157×10^(3) vs 133.8×10^(3)km^(2))notably decreased.This trend highlights the significant increase in intensive vertical utilization of urban land.Furthermore,we identified significant heterogeneity in building space provision and inequality across cities worldwide.This inequality is particularly pronounced in many populous Asian cities,which has been overlooked in previous studies on economic inequality.The GUS-3D dataset shows great potential to deepen our understanding of the urban environment and creates new horizons for numerous 3D urban studies.
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金supported by Independent Research Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(SKLASS-2023-Z13)the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200)+1 种基金A portion of the work was performed at US National High Magnetic Field Laboratory,which is supported by the National Science Foundation(Cooperative Agreement No.DMR-1157490 and DMR-1644779)the State of Florida.Thanks also to Mary Tyler for editing.
文摘The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution kinetics of primary carbides during either heating or soaking.Dissolution of carbides proceeded in three stages(fast→slow→faster)as either temperature or holding time was increased.During the heating process and during the first and third stages of the soaking process,the original size of the carbides determined the steepness of the slope,but during the middle(“slow”)stage of the soaking process,the slope remained zero.The initial size of the carbides varied greatly,but their final dissolution temperature fell within the narrow range of 1210-1235℃,and the holding time remained within 50 min.Fractal analysis was used to study the morphological characteristics of small and medium-sized carbides during the dissolution process.According to changes in the fractal dimension before and after soaking,the carbides tended to evolve towards a more regular morphology.
基金The National Key R&D Program of China under contract No.2018YFC1406202the National Natural Science Foundation of China under contract Nos 41811530301,41830964 and 41976188。
文摘Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targeted observations for individual eddies.A cyclonic eddy surveyed during an oceanographic cruise in the Northwest Pacific Ocean is investigated in this study.The three-dimensional structure of this cyclonic eddy is revealed by observations and simulated by the four-dimensional variational data assimilation(4 DVAR)system combined with the Regional Ocean Modeling System.The observation and assimilation results together present the characteristics of the cyclonic eddy.The cold eddy has an obvious dual-core structure of temperature anomaly.One core is at 50–150 m and another is at 300–550 m,which both have the average temperature anomaly of approximately-3.5℃.The salinity anomaly core is between 250 m and 500 m,which is approximately-0.3.The horizontal velocity structure is axis-asymmetric and it is enhanced on the eastern side of the cold eddy.In the assimilation experiment,sea level anomaly,sea surface temperature,and in situ measurements are assimilated into the system,and the results of assimilation are close to the observations.Based on the high-resolution assimilation output results,the study also diagnoses the vertical velocity in the mesoscale eddy,which reaches the maximum of approximately 10 m/d.The larger vertical velocity is found to be distributed in the range of 0.5 to 1 time of the normalized radius of the eddy.The validation of the simulation result shows that the 4 DVAR method is effective to reconstruct the three-dimensional structure of mesoscale eddy and the research is an application to study the mesoscale eddy in the Northwest Pacific by combining observation and assimilation methods.
