Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)adv...Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)advances microscale 3D metal printing,enabling simpler fabrication of superior metallic microstructures in air without complex equipment or post-processing.However,accurately predicting growth rates with current MCED techniques remain challenging,which is essential for precise structure fabrication and preventing nozzle clogging.In this work,we present a novel approach to electrochemical 3D printing that utilizes a self-adjusting,voxelated method for fabricating metallic microstructures.Diverging from conventional voxelated printing which focuses on monitoring voxel thickness for structure control,this technique adopts a holistic strategy.It ensures each voxel’s position is in alignment with the final structure by synchronizing the micropipette’s trajectory during deposition with the intended design,thus facilitating self-regulation of voxel position and reducing errors associated with environmental fluctuations in deposition parameters.The method’s ability to print micropillars with various tilt angles,high density,and helical arrays demonstrates its refined control over the deposition process.Transmission electron microscopy analysis reveals that the deposited structures,which are fabricated through layer-by-layer(voxel)printing,contain nanotwins that are widely known to enhance the material’s mechanical and electrical properties.Correspondingly,in situ scanning electron microscopy(SEM)microcompression tests confirm this enhancement,showing these structures exhibit a compressive yield strength exceeding 1 GPa.The indentation tests provided an average hardness of 3.71 GPa,which is the highest value reported in previous work using MCED.The resistivity measured by the four-point probe method was(1.95±0.01)×10^(−7)Ω·m,nearly 11 times that of bulk copper.These findings demonstrate the considerable advantage of this technique in fabricating complex metallic microstructures with enhanced mechanical properties,making it suitable for advanced applications in microsensors,microelectronics,and micro-electromechanical systems.展开更多
Porous metals fabricated via three-dimensional(3D)printing have attracted extensive attention in many fields owing to their open pores and customization potential.However,dense internal structures produced by the powd...Porous metals fabricated via three-dimensional(3D)printing have attracted extensive attention in many fields owing to their open pores and customization potential.However,dense internal structures produced by the powder bed fusion technique fails to meet the feature of porous materials in scenarios that demand large specific surface areas.Herein,we propose a strategy for 3D printing of titanium scaffolds featuring multiscale porous internal structures via powder modification and digital light processing(DLP).After modification,the titanium powders were composited with acrylic resin and maintained spherical shapes.Compared with the raw powder slurries,the modified powder slurries exhibited higher stability and preferable curing characteristics,and the depth sensitivity of the modified powder slurries with 45 vol%solid loading increased by approximately 72%.Green scaffolds were subsequently printed from the slurries with a solid loading reaching 45 vol%via DLP 3D printing.The scaffolds had macropores(pore diameters of approximately 1 mm)and internal open micropores(pore diameters of approximately 5.7-13.0μm)after sintering.Additionally,these small-featured(approximately 320μm)scaffolds retained sufficient compressive strength((70.01±3.53)MPa)even with high porosity(approximately 73.95%).This work can facilitate the fabrication of multiscale porous metal scaffolds with high solid loading slurries,offering potential for applications requiring high specific surface area ratios.展开更多
Background:Three-dimensional(3D)printing has revolutionized craniofacial and craniomaxillofacial applications,leading to substantial advancements in patient-specific treatments.In this study,a bibliometric analysis wa...Background:Three-dimensional(3D)printing has revolutionized craniofacial and craniomaxillofacial applications,leading to substantial advancements in patient-specific treatments.In this study,a bibliometric analysis was performed to identify the key contributors,research trends,thematic developments,and collaboration networks in this evolving field.Methods:Two search strategies were employed to ensure a comprehensive analysis:(1)a broad search,in which selected keywords were searched in the title,abstract,and keyword fields to capture all relevant publications,and(2)a title-specific search,in which keywords were restricted to the title field to identify publications with a strong focus on 3D printing in craniofacial and craniomaxillofacial applications.The retrieved dataset was analyzed using VOSviewer and RStudio(bibliometrix package).Results:The broad search retrieved 3534 publications,whereas the title-specific search yielded 280 publications.The analysis of these 280 papers focused on identifying the top authors,universities,and countries,as well as their research dynamics and collaboration networks.A more detailed approach was adopted by examining the titles of these 280 papers.VOSviewer segmented the titles into approximately 800 words,which were then categorized into 18 distinct thematic groups to represent research trends.The focus areas of the ten most cited papers were also analyzed.Conclusion:This bibliometric study provides valuable insights into the progress in 3D printing for craniofacial and craniomaxillofacial applications.By highlighting the key contributors,thematic developments,and collaborative networks,this study offers a foundation for future research in this rapidly advancing field.展开更多
BACKGROUND Prior studies have shown that preserving the left colic artery(LCA)during laparo-scopic radical resection for rectal cancer(RC)can reduce the occurrence of anasto-motic leakage(AL),without compromising onco...BACKGROUND Prior studies have shown that preserving the left colic artery(LCA)during laparo-scopic radical resection for rectal cancer(RC)can reduce the occurrence of anasto-motic leakage(AL),without compromising oncological outcomes.However,anatomical variations in the branches of the inferior mesenteric artery(IMA)and LCA present significant surgical challenges.In this study,we present our novel three dimensional(3D)printed IMA model designed to facilitate preoperative rehearsal and intraoperative navigation to analyze its impact on surgical safety.AIM To investigate the effect of 3D IMA models on preserving the LCA during RC surgery.METHODS We retrospectively collected clinical dates from patients with RC who underwent laparoscopic radical resection from January 2022 to May 2024 at Fuyang People’s Hospital.Patients were divided into the 3D printing and control groups for sta-tistical analysis of perioperative characteristics.RESULTS The 3D printing observation group comprised of 72 patients,while the control group comprised 68 patients.The operation time(174.5±38.2 minutes vs 198.5±49.6 minutes,P=0.002),intraoperative blood loss(43.9±31.3 mL vs 58.2±30.8 mL,P=0.005),duration of hospitalization(13.1±3.1 days vs 15.9±5.6 days,P<0.001),postoperative recovery time(8.6±2.6 days vs 10.5±4.9 days,P=0.007),and the postoperative complication rate(P<0.05)were all significantly lower in the observation group.CONCLUSION Utilization of a 3D-printed IMA model in laparoscopic radical resection of RC can assist surgeons in understanding the LCA anatomy preoperatively,thereby reducing intraoperative bleeding and shortening operating time,demonstrating better clinical application potential.展开更多
Objective:This study aimed to explore the applications of three-dimensional (3D) technology, including virtual reality, augmented reality (AR), and 3D printing system, in the field of medicine, particularly in renal i...Objective:This study aimed to explore the applications of three-dimensional (3D) technology, including virtual reality, augmented reality (AR), and 3D printing system, in the field of medicine, particularly in renal interventions for cancer treatment.Methods:A specialized software transforms 2D medical images into precise 3D digital models, facilitating improved anatomical understanding and surgical planning. Patient-specific 3D printed anatomical models are utilized for preoperative planning, intraoperative guidance, and surgical education. AR technology enables the overlay of digital perceptions onto real-world surgical environments.Results:Patient-specific 3D printed anatomical models have multiple applications, such as preoperative planning, intraoperative guidance, trainee education, and patient counseling. Virtual reality involves substituting the real world with a computer-generated 3D environment, while AR overlays digitally created perceptions onto the existing reality. The advances in 3D modeling technology have sparked considerable interest in their application to partial nephrectomy in the realm of renal cancer. 3D printing, also known as additive manufacturing, constructs 3D objects based on computer-aided design or digital 3D models. Utilizing 3D-printed preoperative renal models provides benefits for surgical planning, offering a more reliable assessment of the tumor's relationship with vital anatomical structures and enabling better preparation for procedures. AR technology allows surgeons to visualize patient-specific renal anatomical structures and their spatial relationships with surrounding organs by projecting CT/MRI images onto a live laparoscopic video. Incorporating patient-specific 3D digital models into healthcare enhances best practice, resulting in improved patient care, increased patient satisfaction, and cost saving for the healthcare system.展开更多
Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understandi...Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understanding of the complex anatomy associated with various heart diseases.In addition,3D-printed models of cardiac diseases may serve as effective educational tools and for hands-on simulation of surgical interventions.We introduce examples of the clinical applications of different types of 3D printing based on specific cases and clinical application scenarios of 3D printing in treating heart diseases.We also discuss the limitations and clinically unmet needs of 3D printing in this context.展开更多
BACKGROUND With the increasing complexity of surgical interventions performed in orthopaedic trauma surgery and the improving technologies used in threedimensional(3D)printing,there has been an increased interest in t...BACKGROUND With the increasing complexity of surgical interventions performed in orthopaedic trauma surgery and the improving technologies used in threedimensional(3D)printing,there has been an increased interest in the concept.It has been shown that 3D models allow surgeons to better visualise anatomy,aid in planning and performing complex surgery.It is however not clear how best to utilise the technique and whether this results in better outcomes.AIM To evaluate the effect of 3D printing used in pre-operative planning in orthopaedic trauma surgery on clinical outcomes.METHODS We performed a comprehensive systematic review of the literature and a metaanalysis.Medline,Ovid and Embase were searched from inception to February 8,2018.Randomised controlled trials,case-control studies,cohort studies and case series of five patients or more were included across any area of orthopaedic trauma.The primary outcomes were operation time,intra-operative blood loss and fluoroscopy used.RESULTS Seventeen studies(922 patients)met our inclusion criteria and were reviewed.The use of 3D printing across all specialties in orthopaedic trauma surgery demonstrated an overall reduction in operation time of 19.85%[95%confidence intervals(CI):(-22.99,-16.71)],intra-operative blood loss of 25.73%[95%CI:(-31.07,-20.40)],and number of times fluoroscopy was used by 23.80%[95%CI:(-38.49,-9.10)].CONCLUSION Our results suggest that the use of 3D printing in pre-operative planning in orthopaedic trauma reduces operative time,intraoperative blood loss and the number of times fluoroscopy is used.展开更多
Hepatocellular carcinoma(HCC)constitutes the fifth most frequent malignancy worldwide and the third most frequent cause of cancer-related deaths.Currently,treatment selection is based on the stage of the disease.Emerg...Hepatocellular carcinoma(HCC)constitutes the fifth most frequent malignancy worldwide and the third most frequent cause of cancer-related deaths.Currently,treatment selection is based on the stage of the disease.Emerging fields such as three-dimensional(3D)printing,3D bioprinting,artificial intelligence(AI),and machine learning(ML)could lead to evidence-based,individualized management of HCC.In this review,we comprehensively report the current applications of 3D printing,3D bioprinting,and AI/ML-based models in HCC management;we outline the significant challenges to the broad use of these novel technologies in the clinical setting with the goal of identifying means to overcome them,and finally,we discuss the opportunities that arise from these applications.Notably,regarding 3D printing and bioprinting-related challenges,we elaborate on cost and cost-effectiveness,cell sourcing,cell viability,safety,accessibility,regulation,and legal and ethical concerns.Similarly,regarding AI/ML-related challenges,we elaborate on intellectual property,liability,intrinsic biases,data protection,cybersecurity,ethical challenges,and transparency.Our findings show that AI and 3D printing applications in HCC management and healthcare,in general,are steadily expanding;thus,these technologies will be integrated into the clinical setting sooner or later.Therefore,we believe that physicians need to become familiar with these technologies and prepare to engage with them constructively.展开更多
Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to crea...Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to create customized scaffolds with high precision and accuracy. In this study, an electrically controlled cortical impactor was used to induce randomized brain tissue defects. The overall shape of scaffolds was designed using rat-specific anatomical data obtained from magnetic resonance imaging, and the internal structure was created by computer- aided design. As the result of limitations arising from insufficient resolution of the manufacturing process, we magnified the size of the cavity model prototype five-fold to successfully fabricate customized collagen-chitosan scaffolds using three-dimensional printing. Results demonstrated that scaffolds have three-dimensional porous structures, high porosity, highly specific surface areas, pore connectivity and good internal characteristics. Neural stem cells co-cultured with scaffolds showed good viability, indicating good biocompatibility and biodegradability. This technique may be a promising new strategy for regenerating complex damaged brain tissues, and helps pave the way toward personalized medicine.展开更多
BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed pre...BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed prenatally rather than at birth.Although three-dimensional US(3DUS)can render the fetus'face via 3D reconstruction,the 3D images are displayed on two-dimensional screens without field depth,which impedes the understanding of untrained individuals.In contrast,a 3D-printed model of the fetus'face helps both parents and doctors develop a more comprehensive understanding of the facial malformation by creating more interactive aspects.Herein,we present an isolated lateral facial cleft case that was diagnosed via US combined with a 3D-printed model.CASE SUMMARY A 31-year-old G2P1 patient presented for routine prenatal screening at the 22nd wk of gestation.The coronal nostril-lip section of two-dimensional US(2DUS)demonstrated that the fetus'bilateral oral commissures were asymmetrical,and left oral commissure was abnormally wide.The left oblique-coronal section showed a cleft at the left oral commissure which extended to the left cheek.The results of 3DUS confirmed the cleft.Furthermore,we created a model of the fetal face using 3D printing technology,which clearly presented facial malformations.The fetus was diagnosed with a left lateral facial cleft,which was categorized as a No.7 facial cleft according to the Tessier facial cleft classification.The parents terminated the pregnancy at the 24th wk of gestation after parental counseling.CONCLUSION In the diagnostic course of the current case,in addition to the traditional application of 2D and 3DUS,we created a 3D-printed model of the fetus,which enhanced diagnostic evidence,benefited the education of junior doctors,improved parental counseling,and had the potential to guide surgical planning.展开更多
A new type of implantable drug delivery devices （ DDD ） with complicated architectures were fubricated by three-dimensional printing technique, employing levofloxacin （LVFX） as a model drug. Processing parameters...A new type of implantable drug delivery devices （ DDD ） with complicated architectures were fubricated by three-dimensional printing technique, employing levofloxacin （LVFX） as a model drug. Processing parameters were optimized in riew of the layer thickness, spucing between printed lines, flow rate of liquid binder and the fast axis speed. The prepared DDD prototype consists of a double-layer structure, of which the upper region is a reservoir system and the lower region is a matrix one. The in vitro release test revealed that LVFX was released in a dual-puse pattern. This DDD may present a new strategy for the prophylaxis and treatment of diseases such as bone infection in the near future.展开更多
BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an ...BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.展开更多
Objective:To use three-dimensional(3D)printing technology to prepare Dashanzha Wan.Methods:The standard formula proportion of Dashanzha Wan was used to prepare printable materials(normally called the ink)for 3D printi...Objective:To use three-dimensional(3D)printing technology to prepare Dashanzha Wan.Methods:The standard formula proportion of Dashanzha Wan was used to prepare printable materials(normally called the ink)for 3D printing,and different doses and shapes of Dashanzha Wan were prepared.Then,the rheological properties,texture characteristics,scanning electron microscopy,and content of ursolic acid were evaluated.Results:Dashanzha Wan ink showed good shear thinning properties,which is very suitable for 3D printing.The printed sample had a beautiful and regular shape with high resolution.Meanwhile,ursolic acid content in 3D-printed Dashanzha Wan aligned with the ursolic acid content shown in the Pharmacopoeia of the People's Republic of China 2020.Conclusion:The 3D-printed Dashanzha Wan has a better texture,and can be shaped into various shapes according to individual needs,which would increase patients’interest when taking medicine.Moreover,3D printing of Dashanzha Wan could be easily integrated into the digital life system,enabling online customization or use at home.This study reveals that 3D printing technology is a promising method for the production of traditional Chinese medicine with personalized appearance,dosage,and texture,which is suitable for a broader population.展开更多
Three-dimensional(3D)printing is a rapidly evolving and promising field to improve outcomes of orthopaedic surgery.The use of patient-specific 3D-printed models is specifically interesting in paediatric orthopaedic su...Three-dimensional(3D)printing is a rapidly evolving and promising field to improve outcomes of orthopaedic surgery.The use of patient-specific 3D-printed models is specifically interesting in paediatric orthopaedic surgery,as limb deformity corrections often require an individual 3D treatment.In this editorial,various operative applications of 3D printing in paediatric orthopaedic surgery are discussed.The technical aspects and the imaging acquisition with computed tomography and magnetic resonance imaging are outlined.Next,there is a focus on the intraoperative applications of 3D printing during paediatric orthopaedic surgical procedures.An overview of various upper and lower limb deformities in paediatrics is given,in which 3D printing is already implemented,including posttraumatic forearm corrections and proximal femoral osteotomies.The use of patient-specific instrumentation(PSI)or guiding templates during the surgical procedure shows to be promising in reducing operation time,intraoperative haemorrhage and radiation exposure.Moreover,3D-printed models for the use of PSI or patient-specific navigation templates are promising in improving the accuracy of complex limb deformity surgery in children.Lastly,the future of 3D printing in paediatric orthopaedics extends beyond the intraoperative applications;various other medical applications include 3D casting and prosthetic limb replacement.In conclusion,3D printing opportunities are numerous,and the fast developments are exciting,but more evidence is required to prove its superiority over conventional paediatric orthopaedic surgery.展开更多
The increasing demand for geometrically complex structures—specifically, higher-inlet-temperature turbine blades for the fifth-generation or other high-generation machines of advanced fighter aircrafts—hasmade the d...The increasing demand for geometrically complex structures—specifically, higher-inlet-temperature turbine blades for the fifth-generation or other high-generation machines of advanced fighter aircrafts—hasmade the development of more complex double-walled three-layer hollow-cavity structures a necessity.However, this requires the preparation of complex ceramic cores and advanced, integrated technologies.Stereolithographic three-dimensional printing (SLA-3DP) technology, with digital control upon materialmorphology, composition, and structure, is a high integration and versatile technique that is superior tothe traditional manufacturing techniques for ceramic cores, including gel casting, injection molding, andhot pressing. The latent capacity of this technique is contingent on the progress of processing routesthat significantly reduce the distortion and defect formation in response to the elimination of the reactedorganic monomer phase during photo-curing. Despite the tremendous progress in the field, multiple challenges remain, such as the preparation of high-solid-content and low-viscosity suspensions, SLA-3DP oflarge double-walled ceramic cores with complex structures, and process optimization and sinter strengthening for the fabrication of ceramic cores. These challenges have prevented the broader applications andreduced the impact of the SLA-3DP technology. This review discusses cutting-edge research on the crucialfactors governing this production method. Specifically, we outline the existing challenges within the fieldand provide our perspective on the upcoming research work and progress.展开更多
This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to De...This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.展开更多
Objective:To evaluate the clinical efficacy of the preoperative digita1 design combined with three dimensional(3D)printing models to assist percutaneous kyphoplasty(PKP)treatment for thoracolumbar compression frac tur...Objective:To evaluate the clinical efficacy of the preoperative digita1 design combined with three dimensional(3D)printing models to assist percutaneous kyphoplasty(PKP)treatment for thoracolumbar compression frac tures.Methods:From January 2018 to August 2020,we obtained data of 99 patients diagnosed thoracolumbar compression fractures.These patients were divided into control group(n=50)underwent traditional PKP surgery,and observation group(n=49)underwent preoperative digital design combined with 3D printing model assisted PKP treatment.The clinical efficacy was evaluated with five parameters,including operation time,number of intraoperative radiographs,visual analogue scale(VAS)score,Cobb Angle change,and high compression rate of injured vertebrae.Results:There were statistically significant differences of operation time and number of intraoperative radio graphs between the two groups(P<0.05).For VAS score,Cobb Angle change and vertebral height compression rate,all of these three parameters were significantly improved when the patients accepted surgery teatment in two groups(P<0.05).However,there were no significant differences between control group and observation group for these three parameters either before or after surgery(P>0.05).Conclusions:Through the design of preoperative surgical guide plate and the application of 3D printing model to guide the operation,the precise design of preoperative surgical puncture site and puncture Angle of the injured vertebra was realized,the number of intraoperative radiographs was reduced,the operation time was shortened and the operation efficiency was improved.展开更多
As an emerging technology to promote the combination of medicine and industry,the three-dimensional(3D)printing has developed rapidly in the fields of orthopedics,while its unique advantages in improving precise treat...As an emerging technology to promote the combination of medicine and industry,the three-dimensional(3D)printing has developed rapidly in the fields of orthopedics,while its unique advantages in improving precise treatment still need to be further popularized.In this report,our team have exhibited several classic cases of integrating 3D printing into orthopedic clinical application,thereby further elaborating thoughts and opinions on the significance of 3D printing in the orthopedic clinical application,technical advantages,existing main problems and coping strategies.展开更多
After the publication of this work,1 the authors noticed and confirmed that the Funding Information was mistakenly omitted from the article.The statement“This study was supported by grants from the National Natural S...After the publication of this work,1 the authors noticed and confirmed that the Funding Information was mistakenly omitted from the article.The statement“This study was supported by grants from the National Natural Science Foundation of China,grant no.81370041,81471760,81671655,the Outstanding Clinical Discipline Project of Shanghai Pudong,grant no.PWYgy2018-04.The authors declare that they have no conflicts of interest.”should be included in the Funding information section of the paper which is missing.We apologize for the error.展开更多
Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas,...Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.展开更多
基金supported in part by National Key R&D Program of China under Grant 2023YFB4705600in part by the National Natural Science Foundation of China under Grants 61925304,62127810 and 62203138+1 种基金in part by the National Postdoctoral Program for Innovative Talents under Grant BX20200107in part by the Self-Planned Task(No.SKLRS202205C)of State Key Laboratory of Robotics and System(HIT).
文摘Microscale metallic structures enhanced by additive manufacturing technology have attracted extensive attention especially in microelectronics and electromechanical devices.Meniscus-confined electrodeposition(MCED)advances microscale 3D metal printing,enabling simpler fabrication of superior metallic microstructures in air without complex equipment or post-processing.However,accurately predicting growth rates with current MCED techniques remain challenging,which is essential for precise structure fabrication and preventing nozzle clogging.In this work,we present a novel approach to electrochemical 3D printing that utilizes a self-adjusting,voxelated method for fabricating metallic microstructures.Diverging from conventional voxelated printing which focuses on monitoring voxel thickness for structure control,this technique adopts a holistic strategy.It ensures each voxel’s position is in alignment with the final structure by synchronizing the micropipette’s trajectory during deposition with the intended design,thus facilitating self-regulation of voxel position and reducing errors associated with environmental fluctuations in deposition parameters.The method’s ability to print micropillars with various tilt angles,high density,and helical arrays demonstrates its refined control over the deposition process.Transmission electron microscopy analysis reveals that the deposited structures,which are fabricated through layer-by-layer(voxel)printing,contain nanotwins that are widely known to enhance the material’s mechanical and electrical properties.Correspondingly,in situ scanning electron microscopy(SEM)microcompression tests confirm this enhancement,showing these structures exhibit a compressive yield strength exceeding 1 GPa.The indentation tests provided an average hardness of 3.71 GPa,which is the highest value reported in previous work using MCED.The resistivity measured by the four-point probe method was(1.95±0.01)×10^(−7)Ω·m,nearly 11 times that of bulk copper.These findings demonstrate the considerable advantage of this technique in fabricating complex metallic microstructures with enhanced mechanical properties,making it suitable for advanced applications in microsensors,microelectronics,and micro-electromechanical systems.
基金supported by the National Natural Science Foundation of China(Nos.52405326,52105588 and 52075421)the Key Research and Development Program of Shaanxi(Nos.2024GX-YBXM-222 and 2023-YBSF-276)。
文摘Porous metals fabricated via three-dimensional(3D)printing have attracted extensive attention in many fields owing to their open pores and customization potential.However,dense internal structures produced by the powder bed fusion technique fails to meet the feature of porous materials in scenarios that demand large specific surface areas.Herein,we propose a strategy for 3D printing of titanium scaffolds featuring multiscale porous internal structures via powder modification and digital light processing(DLP).After modification,the titanium powders were composited with acrylic resin and maintained spherical shapes.Compared with the raw powder slurries,the modified powder slurries exhibited higher stability and preferable curing characteristics,and the depth sensitivity of the modified powder slurries with 45 vol%solid loading increased by approximately 72%.Green scaffolds were subsequently printed from the slurries with a solid loading reaching 45 vol%via DLP 3D printing.The scaffolds had macropores(pore diameters of approximately 1 mm)and internal open micropores(pore diameters of approximately 5.7-13.0μm)after sintering.Additionally,these small-featured(approximately 320μm)scaffolds retained sufficient compressive strength((70.01±3.53)MPa)even with high porosity(approximately 73.95%).This work can facilitate the fabrication of multiscale porous metal scaffolds with high solid loading slurries,offering potential for applications requiring high specific surface area ratios.
文摘Background:Three-dimensional(3D)printing has revolutionized craniofacial and craniomaxillofacial applications,leading to substantial advancements in patient-specific treatments.In this study,a bibliometric analysis was performed to identify the key contributors,research trends,thematic developments,and collaboration networks in this evolving field.Methods:Two search strategies were employed to ensure a comprehensive analysis:(1)a broad search,in which selected keywords were searched in the title,abstract,and keyword fields to capture all relevant publications,and(2)a title-specific search,in which keywords were restricted to the title field to identify publications with a strong focus on 3D printing in craniofacial and craniomaxillofacial applications.The retrieved dataset was analyzed using VOSviewer and RStudio(bibliometrix package).Results:The broad search retrieved 3534 publications,whereas the title-specific search yielded 280 publications.The analysis of these 280 papers focused on identifying the top authors,universities,and countries,as well as their research dynamics and collaboration networks.A more detailed approach was adopted by examining the titles of these 280 papers.VOSviewer segmented the titles into approximately 800 words,which were then categorized into 18 distinct thematic groups to represent research trends.The focus areas of the ten most cited papers were also analyzed.Conclusion:This bibliometric study provides valuable insights into the progress in 3D printing for craniofacial and craniomaxillofacial applications.By highlighting the key contributors,thematic developments,and collaborative networks,this study offers a foundation for future research in this rapidly advancing field.
基金Supported by the Health Commission of Fuyang City,No.FY2021-18Bengbu Medical College of Bengbu City,No.2023byzd215the Health Commission Anhui Provence,No.AHWJ2023BAa20164.
文摘BACKGROUND Prior studies have shown that preserving the left colic artery(LCA)during laparo-scopic radical resection for rectal cancer(RC)can reduce the occurrence of anasto-motic leakage(AL),without compromising oncological outcomes.However,anatomical variations in the branches of the inferior mesenteric artery(IMA)and LCA present significant surgical challenges.In this study,we present our novel three dimensional(3D)printed IMA model designed to facilitate preoperative rehearsal and intraoperative navigation to analyze its impact on surgical safety.AIM To investigate the effect of 3D IMA models on preserving the LCA during RC surgery.METHODS We retrospectively collected clinical dates from patients with RC who underwent laparoscopic radical resection from January 2022 to May 2024 at Fuyang People’s Hospital.Patients were divided into the 3D printing and control groups for sta-tistical analysis of perioperative characteristics.RESULTS The 3D printing observation group comprised of 72 patients,while the control group comprised 68 patients.The operation time(174.5±38.2 minutes vs 198.5±49.6 minutes,P=0.002),intraoperative blood loss(43.9±31.3 mL vs 58.2±30.8 mL,P=0.005),duration of hospitalization(13.1±3.1 days vs 15.9±5.6 days,P<0.001),postoperative recovery time(8.6±2.6 days vs 10.5±4.9 days,P=0.007),and the postoperative complication rate(P<0.05)were all significantly lower in the observation group.CONCLUSION Utilization of a 3D-printed IMA model in laparoscopic radical resection of RC can assist surgeons in understanding the LCA anatomy preoperatively,thereby reducing intraoperative bleeding and shortening operating time,demonstrating better clinical application potential.
文摘Objective:This study aimed to explore the applications of three-dimensional (3D) technology, including virtual reality, augmented reality (AR), and 3D printing system, in the field of medicine, particularly in renal interventions for cancer treatment.Methods:A specialized software transforms 2D medical images into precise 3D digital models, facilitating improved anatomical understanding and surgical planning. Patient-specific 3D printed anatomical models are utilized for preoperative planning, intraoperative guidance, and surgical education. AR technology enables the overlay of digital perceptions onto real-world surgical environments.Results:Patient-specific 3D printed anatomical models have multiple applications, such as preoperative planning, intraoperative guidance, trainee education, and patient counseling. Virtual reality involves substituting the real world with a computer-generated 3D environment, while AR overlays digitally created perceptions onto the existing reality. The advances in 3D modeling technology have sparked considerable interest in their application to partial nephrectomy in the realm of renal cancer. 3D printing, also known as additive manufacturing, constructs 3D objects based on computer-aided design or digital 3D models. Utilizing 3D-printed preoperative renal models provides benefits for surgical planning, offering a more reliable assessment of the tumor's relationship with vital anatomical structures and enabling better preparation for procedures. AR technology allows surgeons to visualize patient-specific renal anatomical structures and their spatial relationships with surrounding organs by projecting CT/MRI images onto a live laparoscopic video. Incorporating patient-specific 3D digital models into healthcare enhances best practice, resulting in improved patient care, increased patient satisfaction, and cost saving for the healthcare system.
基金This study was supported by the National key R&D plan(No.2020YFC2008100)the Science and Technology Innovation Team Project of the Shaanxi Innovation Capability Support Plan(No.S2020-ZC-TD-0029)the Science Foundation for Distinguished Young Scholars of Shaanxi Natural Science Basic Research Program(No.S2018-JC-JQ-0094)。
文摘Heart diseases remain the top threat to human health,and the treatment of heart diseases changes with each passing day.Convincing evidence shows that three-dimensional(3D)printing allows for a more precise understanding of the complex anatomy associated with various heart diseases.In addition,3D-printed models of cardiac diseases may serve as effective educational tools and for hands-on simulation of surgical interventions.We introduce examples of the clinical applications of different types of 3D printing based on specific cases and clinical application scenarios of 3D printing in treating heart diseases.We also discuss the limitations and clinically unmet needs of 3D printing in this context.
文摘BACKGROUND With the increasing complexity of surgical interventions performed in orthopaedic trauma surgery and the improving technologies used in threedimensional(3D)printing,there has been an increased interest in the concept.It has been shown that 3D models allow surgeons to better visualise anatomy,aid in planning and performing complex surgery.It is however not clear how best to utilise the technique and whether this results in better outcomes.AIM To evaluate the effect of 3D printing used in pre-operative planning in orthopaedic trauma surgery on clinical outcomes.METHODS We performed a comprehensive systematic review of the literature and a metaanalysis.Medline,Ovid and Embase were searched from inception to February 8,2018.Randomised controlled trials,case-control studies,cohort studies and case series of five patients or more were included across any area of orthopaedic trauma.The primary outcomes were operation time,intra-operative blood loss and fluoroscopy used.RESULTS Seventeen studies(922 patients)met our inclusion criteria and were reviewed.The use of 3D printing across all specialties in orthopaedic trauma surgery demonstrated an overall reduction in operation time of 19.85%[95%confidence intervals(CI):(-22.99,-16.71)],intra-operative blood loss of 25.73%[95%CI:(-31.07,-20.40)],and number of times fluoroscopy was used by 23.80%[95%CI:(-38.49,-9.10)].CONCLUSION Our results suggest that the use of 3D printing in pre-operative planning in orthopaedic trauma reduces operative time,intraoperative blood loss and the number of times fluoroscopy is used.
文摘Hepatocellular carcinoma(HCC)constitutes the fifth most frequent malignancy worldwide and the third most frequent cause of cancer-related deaths.Currently,treatment selection is based on the stage of the disease.Emerging fields such as three-dimensional(3D)printing,3D bioprinting,artificial intelligence(AI),and machine learning(ML)could lead to evidence-based,individualized management of HCC.In this review,we comprehensively report the current applications of 3D printing,3D bioprinting,and AI/ML-based models in HCC management;we outline the significant challenges to the broad use of these novel technologies in the clinical setting with the goal of identifying means to overcome them,and finally,we discuss the opportunities that arise from these applications.Notably,regarding 3D printing and bioprinting-related challenges,we elaborate on cost and cost-effectiveness,cell sourcing,cell viability,safety,accessibility,regulation,and legal and ethical concerns.Similarly,regarding AI/ML-related challenges,we elaborate on intellectual property,liability,intrinsic biases,data protection,cybersecurity,ethical challenges,and transparency.Our findings show that AI and 3D printing applications in HCC management and healthcare,in general,are steadily expanding;thus,these technologies will be integrated into the clinical setting sooner or later.Therefore,we believe that physicians need to become familiar with these technologies and prepare to engage with them constructively.
基金supported by the National Natural Science Foundation of China,No.81301050,81401067,81271392,81471275,81541034the Natural Science Foundation of Tianjin City of China,No.14JCQNJC10200,15JCQNJC11100,16JCYBJC27600
文摘Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to create customized scaffolds with high precision and accuracy. In this study, an electrically controlled cortical impactor was used to induce randomized brain tissue defects. The overall shape of scaffolds was designed using rat-specific anatomical data obtained from magnetic resonance imaging, and the internal structure was created by computer- aided design. As the result of limitations arising from insufficient resolution of the manufacturing process, we magnified the size of the cavity model prototype five-fold to successfully fabricate customized collagen-chitosan scaffolds using three-dimensional printing. Results demonstrated that scaffolds have three-dimensional porous structures, high porosity, highly specific surface areas, pore connectivity and good internal characteristics. Neural stem cells co-cultured with scaffolds showed good viability, indicating good biocompatibility and biodegradability. This technique may be a promising new strategy for regenerating complex damaged brain tissues, and helps pave the way toward personalized medicine.
文摘BACKGROUND Lateral facial clefts are atypical with a low incidence in the facial cleft spectrum.With the development of ultrasonography(US)prenatal screening,such facial malformations can be detected and diagnosed prenatally rather than at birth.Although three-dimensional US(3DUS)can render the fetus'face via 3D reconstruction,the 3D images are displayed on two-dimensional screens without field depth,which impedes the understanding of untrained individuals.In contrast,a 3D-printed model of the fetus'face helps both parents and doctors develop a more comprehensive understanding of the facial malformation by creating more interactive aspects.Herein,we present an isolated lateral facial cleft case that was diagnosed via US combined with a 3D-printed model.CASE SUMMARY A 31-year-old G2P1 patient presented for routine prenatal screening at the 22nd wk of gestation.The coronal nostril-lip section of two-dimensional US(2DUS)demonstrated that the fetus'bilateral oral commissures were asymmetrical,and left oral commissure was abnormally wide.The left oblique-coronal section showed a cleft at the left oral commissure which extended to the left cheek.The results of 3DUS confirmed the cleft.Furthermore,we created a model of the fetal face using 3D printing technology,which clearly presented facial malformations.The fetus was diagnosed with a left lateral facial cleft,which was categorized as a No.7 facial cleft according to the Tessier facial cleft classification.The parents terminated the pregnancy at the 24th wk of gestation after parental counseling.CONCLUSION In the diagnostic course of the current case,in addition to the traditional application of 2D and 3DUS,we created a 3D-printed model of the fetus,which enhanced diagnostic evidence,benefited the education of junior doctors,improved parental counseling,and had the potential to guide surgical planning.
文摘A new type of implantable drug delivery devices （ DDD ） with complicated architectures were fubricated by three-dimensional printing technique, employing levofloxacin （LVFX） as a model drug. Processing parameters were optimized in riew of the layer thickness, spucing between printed lines, flow rate of liquid binder and the fast axis speed. The prepared DDD prototype consists of a double-layer structure, of which the upper region is a reservoir system and the lower region is a matrix one. The in vitro release test revealed that LVFX was released in a dual-puse pattern. This DDD may present a new strategy for the prophylaxis and treatment of diseases such as bone infection in the near future.
文摘BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.
基金supported by Seed Funding of the Beijing University of Chinese Medicine(90011451310034).
文摘Objective:To use three-dimensional(3D)printing technology to prepare Dashanzha Wan.Methods:The standard formula proportion of Dashanzha Wan was used to prepare printable materials(normally called the ink)for 3D printing,and different doses and shapes of Dashanzha Wan were prepared.Then,the rheological properties,texture characteristics,scanning electron microscopy,and content of ursolic acid were evaluated.Results:Dashanzha Wan ink showed good shear thinning properties,which is very suitable for 3D printing.The printed sample had a beautiful and regular shape with high resolution.Meanwhile,ursolic acid content in 3D-printed Dashanzha Wan aligned with the ursolic acid content shown in the Pharmacopoeia of the People's Republic of China 2020.Conclusion:The 3D-printed Dashanzha Wan has a better texture,and can be shaped into various shapes according to individual needs,which would increase patients’interest when taking medicine.Moreover,3D printing of Dashanzha Wan could be easily integrated into the digital life system,enabling online customization or use at home.This study reveals that 3D printing technology is a promising method for the production of traditional Chinese medicine with personalized appearance,dosage,and texture,which is suitable for a broader population.
文摘Three-dimensional(3D)printing is a rapidly evolving and promising field to improve outcomes of orthopaedic surgery.The use of patient-specific 3D-printed models is specifically interesting in paediatric orthopaedic surgery,as limb deformity corrections often require an individual 3D treatment.In this editorial,various operative applications of 3D printing in paediatric orthopaedic surgery are discussed.The technical aspects and the imaging acquisition with computed tomography and magnetic resonance imaging are outlined.Next,there is a focus on the intraoperative applications of 3D printing during paediatric orthopaedic surgical procedures.An overview of various upper and lower limb deformities in paediatrics is given,in which 3D printing is already implemented,including posttraumatic forearm corrections and proximal femoral osteotomies.The use of patient-specific instrumentation(PSI)or guiding templates during the surgical procedure shows to be promising in reducing operation time,intraoperative haemorrhage and radiation exposure.Moreover,3D-printed models for the use of PSI or patient-specific navigation templates are promising in improving the accuracy of complex limb deformity surgery in children.Lastly,the future of 3D printing in paediatric orthopaedics extends beyond the intraoperative applications;various other medical applications include 3D casting and prosthetic limb replacement.In conclusion,3D printing opportunities are numerous,and the fast developments are exciting,but more evidence is required to prove its superiority over conventional paediatric orthopaedic surgery.
基金This work was supported by the National Key Research and Development Program,China(No.2018YFB1106600)National Science and Technology Major Project,China(No.2017-VI-0002–0072 and No.Y2019-VII-0011-0151).
文摘The increasing demand for geometrically complex structures—specifically, higher-inlet-temperature turbine blades for the fifth-generation or other high-generation machines of advanced fighter aircrafts—hasmade the development of more complex double-walled three-layer hollow-cavity structures a necessity.However, this requires the preparation of complex ceramic cores and advanced, integrated technologies.Stereolithographic three-dimensional printing (SLA-3DP) technology, with digital control upon materialmorphology, composition, and structure, is a high integration and versatile technique that is superior tothe traditional manufacturing techniques for ceramic cores, including gel casting, injection molding, andhot pressing. The latent capacity of this technique is contingent on the progress of processing routesthat significantly reduce the distortion and defect formation in response to the elimination of the reactedorganic monomer phase during photo-curing. Despite the tremendous progress in the field, multiple challenges remain, such as the preparation of high-solid-content and low-viscosity suspensions, SLA-3DP oflarge double-walled ceramic cores with complex structures, and process optimization and sinter strengthening for the fabrication of ceramic cores. These challenges have prevented the broader applications andreduced the impact of the SLA-3DP technology. This review discusses cutting-edge research on the crucialfactors governing this production method. Specifically, we outline the existing challenges within the fieldand provide our perspective on the upcoming research work and progress.
文摘This study is aimed to explore the clinical application of the guiding template designed by three-dimensional printing data for the insertion of sacroiliac screws.A retrospective study of 7 cases (from July 2016 to December 2016),in which the guiding template printed by the three-dimensional printing technique was used for the insertion of sacroiliac screws of patients with posterior ring injuries of pelvis,was performed.Totally,4 males and 3 females were included in template group,aged from 38to 65years old (mean 50.86±8.90).Of them,5 had sacral fractures (3 with Denis type Ⅰ and 2 with type Ⅱ)and 2 the separation of sacroiliac joint.Guiding templates were firstly made by the three-dimensional printing technique based on the pre-operative CT data. Surgical operations for the stabilization of pelvic ring by applying the guiding templates were carried out.A group of 8 patients with sacroiliac injuries treated by percutaneous sacroiliac screws were analyzed as a control group retrospectively.The time of each screw insertion,volume of intra-operative blood loss,and the exposure to X ray were analyzed and the Matta's radiological criteria were used to evaluate the reduction quality.The Majeed score was used to evaluate postoperative living quality.The visual analogue scale (VAS)was applied at different time points to judge pain relief of coccydynia.All the 7 patients in the template group were closely followed up radiographically and clinically for 14 to 20 months,mean (16.57±2.44)months.Totally 9 sacroiliac screws for the S 1 and S2 vertebra were inserted in the 7 patients.The time length for each screw insertion ranged from 450 to 870 s,mean (690.56±135.68)s,and the number of times of exposure to X ray were 4 to 8,mean (5.78±1.20).The intra-operative blood loss ranged from 45to 120 mL,mean (75±23.32)mL.According to Matta's radiology criteria,the fracture and dislocation reduction were excellent in 6cases and good in 1.The pre-operative VAS score ranged from 5.2 to 8.1,mean (7.13±1.00).The average one-week/six-month post-operative VAS was (5.33±0.78)and (1.33±0.66),respectively (P<0.05 when compared with pre-operative VAS).The 12-month post-operative Majeed score ranged from 86 to 92,mean (90.29±2.21).The three-dimensional printed guiding template for sacroiliac screw insertion,which could significantly shorten the operation time,provide a satisfied outcome of the stabilization of the pelvic ring,and protect doctors and patients from X-ray exposure,might be a practical and valuable new clinical technique.
基金supported in part by the General Program of Natural Science Foundation of Hubei Province,China(Grant No.2020CFB548)a Project in 2021 of Science and Technology Support Plan of Guizhou Province,China(Grant No.202158413293820389).
文摘Objective:To evaluate the clinical efficacy of the preoperative digita1 design combined with three dimensional(3D)printing models to assist percutaneous kyphoplasty(PKP)treatment for thoracolumbar compression frac tures.Methods:From January 2018 to August 2020,we obtained data of 99 patients diagnosed thoracolumbar compression fractures.These patients were divided into control group(n=50)underwent traditional PKP surgery,and observation group(n=49)underwent preoperative digital design combined with 3D printing model assisted PKP treatment.The clinical efficacy was evaluated with five parameters,including operation time,number of intraoperative radiographs,visual analogue scale(VAS)score,Cobb Angle change,and high compression rate of injured vertebrae.Results:There were statistically significant differences of operation time and number of intraoperative radio graphs between the two groups(P<0.05).For VAS score,Cobb Angle change and vertebral height compression rate,all of these three parameters were significantly improved when the patients accepted surgery teatment in two groups(P<0.05).However,there were no significant differences between control group and observation group for these three parameters either before or after surgery(P>0.05).Conclusions:Through the design of preoperative surgical guide plate and the application of 3D printing model to guide the operation,the precise design of preoperative surgical puncture site and puncture Angle of the injured vertebra was realized,the number of intraoperative radiographs was reduced,the operation time was shortened and the operation efficiency was improved.
文摘As an emerging technology to promote the combination of medicine and industry,the three-dimensional(3D)printing has developed rapidly in the fields of orthopedics,while its unique advantages in improving precise treatment still need to be further popularized.In this report,our team have exhibited several classic cases of integrating 3D printing into orthopedic clinical application,thereby further elaborating thoughts and opinions on the significance of 3D printing in the orthopedic clinical application,technical advantages,existing main problems and coping strategies.
文摘After the publication of this work,1 the authors noticed and confirmed that the Funding Information was mistakenly omitted from the article.The statement“This study was supported by grants from the National Natural Science Foundation of China,grant no.81370041,81471760,81671655,the Outstanding Clinical Discipline Project of Shanghai Pudong,grant no.PWYgy2018-04.The authors declare that they have no conflicts of interest.”should be included in the Funding information section of the paper which is missing.We apologize for the error.
基金supported by a grant from the National HighTech Research and Development Projects (Grant No. 2015AA020303)
文摘Three-dimensional(3D) printing(3DP) is a rapid prototyping technology that has gained increasing recognition in many different fields. Inherent accuracy and low-cost property enable applicability of 3DP in many areas, such as manufacturing, aerospace,medical, and industrial design. Recently, 3DP has gained considerable attention in the medical field. The image data can be quickly turned into physical objects by using 3DP technology. These objects are being used across a variety of surgical specialties. The shortage of cadaver specimens is a major problem in medical education. However, this concern has been solved with the emergence of 3DP model. Custom-made items can be produced by using 3DP technology. This innovation allows 3DP use in preoperative planning and surgical training. Learning is difficult among medical students because of the complex anatomical structures of the liver. Thus, 3D visualization is a useful tool in anatomy teaching and hepatic surgical training. However,conventional models do not capture haptic qualities. 3DP can produce highly accurate and complex physical models. Many types of human or animal differentiated cells can be printed successfully with the development of 3D bio-printing technology. This progress represents a valuable breakthrough that exhibits many potential uses, such as research on drug metabolism or liver disease mechanism. This technology can also be used to solve shortage of organs for transplant in the future.
