Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspher...Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.展开更多
In recent years,research investigations have focused on the substantial freshwater storage in the Beaufort Gyre(BG)region due to climate change.Despite active mesoscale eddies in the area,a notable gap in understandin...In recent years,research investigations have focused on the substantial freshwater storage in the Beaufort Gyre(BG)region due to climate change.Despite active mesoscale eddies in the area,a notable gap in understanding the three-dimensional structure and induced transport has been observed.This study concentrates on the Canada Basin in the western Arctic Ocean,specifically examining a subsurface anticyclonic eddy(SAE)sampled by a Mooring A in the BG region.Hybrid Coordinate Ocean Model(HYCOM)analysis data reveal its lifecycle from February 15 to March 15,2017,marked by initiation,development,maturity,decay,and termination stages.This work extends the finding of SAE passing through Mooring A by examining its overall effects,spatiotemporal variations,and swirl transport.SAE generation through baroclinic instability,which contributes to the westward tilt of the vertical axis,is also confirmed in this study.Swirl transport induced by SAE is predominantly eastward and downward due to its trajectory and background flow.SAE temporarily weakens stratification and extends the subsurface depth but demonstrates transient effects.Moreover,SAE transports upper-layer freshwater,Pacific Winter Water,and Atlantic Water downward,emphasizing its potential influence on freshwater redistribution in the Canadian Basin.This research provides valuable insights into mesoscale eddy dynamics,revealing their role in modulating the upper water mass in the BG region.展开更多
In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infi...In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.展开更多
The dispersibility of active components in hydrodesulfurization(HDS)catalysts significantly influences the corresponding catalytic performance.In this study,sugar-based materials(glucose,chitosan,soluble starch,and co...The dispersibility of active components in hydrodesulfurization(HDS)catalysts significantly influences the corresponding catalytic performance.In this study,sugar-based materials(glucose,chitosan,soluble starch,and corn starch)were utilized to prepare CoMo bulk HDS catalysts through a sugar foaming process.The foaming intermediates were analyzed using TG,FTIR,and Raman techniques to investigate the pyrolysis and carbonization process,revealing the presence of graphitic carbon in the 3 DPG,3 DPSS,and 3 DPCS catalysts even after calcination in an air atmosphere.The catalysts were further characterized using SEM,XRD,TEM,low-temperature N_(2) physical adsorption,and XPS.The 3 DPSS catalyst exhibited a thiophene conversion of 94.8%at 360℃ and 1 MPa,which could be ascribed to its unique three-dimensional pore structure,high dispersion of MoS_(2)(0.21),and high fraction of Mo^(4+)(83.14%).This study demonstrates the potential of using the sugar foaming technique to develop highly efficient HDS catalysts and provides new insights into the relationship between the physicochemical properties of the obtained catalysts and their catalytic performance.展开更多
The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design m...The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design mechanical equivalent porous structures for artificial femoral heads.Firstly,supported by Micro and clinical CT scans of 21 bone specimens,the anisotropic mechanical parameters of human cancellous bone in the femoral head were characterized using clinical CT values(Hounsfield unit).After that,the equivalent porous structure of cancellous bone was designed based on the gyroid surface,the influence of its degree of anisotropy and volume fraction on the macroscopic mechanical parameters was investigated by finite element analysis.Furthermore,a mapping relationship between CT values and the porous structure was established by jointly solving the mechanical parameters of the porous structure and human cancellous bone,allowing the design of personalized gradient porous structures based on clinical CT images.Finally,to verify the mechanical equivalence,implant press-in tests were conducted on 3D-printed artificial femoral heads and human femoral heads,the influence of the porous structure’s cell size in bone-implant interaction problems was also explored.Results showed that the minimum deviations of press-in stiffness(<15%)and peak load(<5%)both occurred when the cell size was 20%to 30%of the implant diameter.In conclusion,the designed porous structure can replicate the human cancellous bone-implant interaction at a high level,indicating its effectiveness in optimizing the mechanical performance of 3D-printed artificial femoral head.展开更多
This article aims to develop a head pursuit （HP） guidance law for three-dimensional hypervelocity interception, so that the effect of the perturbation induced by seeker detection can be reduced. On the basis of a no...This article aims to develop a head pursuit （HP） guidance law for three-dimensional hypervelocity interception, so that the effect of the perturbation induced by seeker detection can be reduced. On the basis of a novel HP three-dimensional guidance model, a nonlinear variable structure guidance law is presented by using Lyapunov stability theory. The guidance law positions the interceptor ahead of the target on its tlight trajectory, and the speed of the interceptor is required to be lower than that of the target, A numerical example of maneuvering ballistic target interception verifies the rightness of the guidance model and the effectiveness of the proposed method.展开更多
The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structur...The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.展开更多
Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser m...Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.展开更多
Faced with complex operational environments,liquid metal divertors are considered alternative solutions to traditional solid divertors.Experiments have been conducted using a self-designed embedded multichannel capill...Faced with complex operational environments,liquid metal divertors are considered alternative solutions to traditional solid divertors.Experiments have been conducted using a self-designed embedded multichannel capillary porous structure(EM-CPS)for plasma irradiation of lithium(Li)-prefilled EM-CPS in the high-density linear plasma device(SCU-PSI).The optical image analysis of the interaction region between the plasma and Li vapor shows that the region is not a regular geometric shape and the point of strongest light emission appears 1–2 cm in front of the target rather than on its surface.The irregularity is due to the uneven distribution and density of the Li vapor,as well as the radial and axial attenuation of the plasma.As the plasma discharge parameters increase,the vapor profile initially expands globally and then contracts locally,with the point of the strongest light emission gradually moving towards the target surface.The spectral lines of Li 670.78 nm and Ar 763.51 nm in the interaction region are produced by deexcitation.These lines gradually decrease in intensity along the axial direction,which is close to the trend of light emission intensity that initially increases and then decreases along the same direction.These findings provide a reference for studying the interaction mechanism between plasma and liquid Li capillary porous structures in linear plasma devices and future tokamak.展开更多
With the impact of energy crisis and environmental problems,it is urgent to develop green sustainable energy.Osmotic energy stored in the salinity difference between seawater and river water is one of the sustainable,...With the impact of energy crisis and environmental problems,it is urgent to develop green sustainable energy.Osmotic energy stored in the salinity difference between seawater and river water is one of the sustainable,abundant,and renewable energy.However,the membranes used to capture osmotic energy by reverse electrodialysis(RED)always suffer from low ion selectivity,low stability and low power.Hydrogels with three-dimensional(3D)networks have shown great potential for ion transportation and energy conversion.In this work,based on the homogeneity and porosity characteristics of acrylamide(AM)hydrogel,as well as the remarkable stability and abundant negative charge of 3-sulfopropyl acrylate potassium salt(SPAK),a high-performance AM/SPAK cation-selective hydrogel membrane was successfully developed for harvesting osmotic energy.Compared to AM hydrogels,utilizing AM/SPAK as a monomer mixture greatly facilitated the preparation of homogeneous polymers,exhibiting a porous structure,exceptional ion selectivity,and remarkable stability.A maximum output power density of 13.73 W/m^(2)was achieved at a 50-fold NaCl concentration gradient,exceeding the commercial requirement of 5 W/m^(2).This work broadens the idea for the construction and application of composite hydrogel in high efficiency osmotic energy conversion.展开更多
Microseismic/acoustic emission(MS/AE)source localization method is crucial for predicting and controlling of potentially dangerous sources of complex structures.However,the locating errors induced by both the irregula...Microseismic/acoustic emission(MS/AE)source localization method is crucial for predicting and controlling of potentially dangerous sources of complex structures.However,the locating errors induced by both the irregular structure and pre-measured velocity are poorly understood in existing methods.To meet the high-accuracy locating requirements in complex three-dimensional hole-containing structures,a velocity-free MS/AE source location method is developed in this paper.It avoids manual repetitive training by using equidistant grid points to search the path,which introduces A*search algorithm and uses grid points to accommodate complex structures with irregular holes.It also takes advantage of the velocity-free source location method.To verify the validity of the proposed method,lead-breaking tests were performed on a cubic concrete test specimen with a size of 10 cm10 cm10 cm.It was cut out into a cylindrical empty space with a size of/6cm10 cm.Based on the arrivals,the classical Geiger method and the proposed method are used to locate lead-breaking sources.Results show that the locating error of the proposed method is 1.20 cm,which is less than 2.02 cm of the Geiger method.Hence,the proposed method can effectively locate sources in the complex three-dimensional structure with holes and achieve higher precision requirements.展开更多
Flexible piezoresistive sensors based on biomimetic microstructures are prospective for broad application in motion monitoring.However,the design and preparation processes of most biomimetic microstructures in the exi...Flexible piezoresistive sensors based on biomimetic microstructures are prospective for broad application in motion monitoring.However,the design and preparation processes of most biomimetic microstructures in the existing studies are complicated,and there are few studies on pore size control.Herein,the porous structure of human bones was used as a biomimetic prototype,and optimally designed by creating a theoretical equivalent sensor model and a finite element model.Soluble raw materials such as sugar and salt in different particle sizes were pressed into porous templates.Based on the template method,porous structures in different pore sizes were prepared using polydimethylsiloxane(PDMS)polymer as the substrate.On this basis,graphene oxide conductive coating was prepared with the modified Hummers method and then deposited via dip coating onto the substrate.Finally,a PDMS-based porous structure biomimetic flexible piezoresistive sensor was developed.Mechanically,the deformation of the sensor under the same load increased with the pore size rising from 0.3 to 1.5 mm.Electrically,the resistance rang of the sensor was enlarged as the pore size rose.The resistance variation rates of samples with pore sizes of 0.3,1.0,and 1.5 mm at approximately the 200th cycle were 63%,79%,and 81%,respectively;at the 500th cycle,these values were 63%,77%,and 79%;and at the 1000th cycle,they stabilized at 63%,74%,and 76%.These results indicate that the fabricated sensor exhibits high stability and fatigue resistance.At the pressure of 0–25 kPa,the sensitivity rose from 0.0688 to 0.1260 kPa−1,and the performance was enhanced by 83%.After 1,000 cycles of compression testing,the signal output was stable,and no damage was caused to the substrate.Further application tests showed the biomimetic sensor accurately and effectively identified human joint motions and gestures,and has potential application value in human motion monitoring.展开更多
Hierarchical porous structure,which include macropores,minor pores,and micropores in scaffolds,are essential in the multiple biological functions of bone repair and regeneration.In this study,patientcustomized calcium...Hierarchical porous structure,which include macropores,minor pores,and micropores in scaffolds,are essential in the multiple biological functions of bone repair and regeneration.In this study,patientcustomized calcium-deficient hydroxyapatite(CDHA)scaffolds with three-level hierarchical porous structure were fabricated by indirect 3D printing technology and particulate leaching method.The sacrificial template scaffolds were fabricated using a photo-curing 3D printer,which provided a prerequisite for the integral structure and interconnected macropores of CDHA scaffolds.Additionally,20 wt%pore former was incorporated into the slurry to enhance the content of smaller pores within the CDHA-2 scaffolds,and then the CDHA-2 scaffolds were sintered to remove the sacrificial template scaffolds and pore former.The obtained CDHA-2 scaffolds exhibited interconnected macropores(300-400μm),minor pores(∼10-100μm),and micropores(<10μm)distributed throughout the scaffolds,which could promote bone tissue ingrowth,increase surface roughness,and enhance protein adsorption of scaffolds.In vitro studies identified that CDHA-2 scaffolds had nanocrystal grains,high specific surface area,and outstanding protein adsorption capacity,which could provide a microenvironment for cell adhesion,spreading,and proliferation.In addition,the murine intramuscular implantation experiment suggested that CDHA-2 scaffolds exhibited excellent osteoinductivity and were superior to traditional BCP ceramics under conditions without the addition of live cells and exogenous growth factors.The rabbit calvarial defect repair results indicated that CDHA-2 scaffolds could enhance in situ bone regeneration.In conclusion,these findings demonstrated that the hierarchical porous structure of CDHA scaffolds was a pivotal factor in modulating osteoinductivity and bone regeneration,and CDHA-2 scaffolds were potential candidates for bone regeneration.展开更多
As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014...As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014,an anticyclonic eddy located at 135°E-155°E,26°N-42°N was observed using 17 rapidsampling Argo floats,and the spatiotemporal variations in the three-dimensional structure were studied.The results are as follows:(1)the eddy was identified and tracked using satellite altimeter data.It had a lifetime of 269 days and an average radius of 91.5 km.The lifetime of the eddy can be divided into three phases,i.e.,the initiation,maturity,and termination phases.The depth of its influence reached 1000 m;(2)the Argo profiles were divided into seven periods(approximately 20 days in each)for composite analysis,and the composite Argo profiles and CARS2009(CSIRO Atlas of Regional Seas)climatology data were merged following the data-interpolating variational analysis(DIVA)method to reconstruct the three-dimensional structure.The temperature and salinity anomaly cores of the anticyclonic mesoscale eddy are located from 400 to 600 m.From 800 to 900 m,there is an area of low salinity at the center of the eddy.A high concentration anomaly of dissolved oxygen was located at approximately 250 m;(3)to better understand the features of the eddy and its interaction with the surroundings,we calculated the anomalous velocity of the geostrophic flow and the heat,salt,dissolved oxygen transport anomaly,and discussed the eddy's origin and its adjustments to topography.The maximum heat,salt,and oxygen transport caused by eddy were 9.37×10^11 W,3.08×10^3 kg/s,and 2.70×10^2 kg/s,which all occurred during the termination phase.This study highlights the applicability of using Argo floats to understand the three-dimensional structure thermohaline features of eddies in the North Pacific.展开更多
The three-dimensional structure and the seasonal variation of the North Pacific meridional overturning circulation （NPMOC） are analyzed based on the Simple Ocean Data Assimilation data and Argo profiling float data....The three-dimensional structure and the seasonal variation of the North Pacific meridional overturning circulation （NPMOC） are analyzed based on the Simple Ocean Data Assimilation data and Argo profiling float data. The NPMOC displays a multi-cell structure with four cells in the North Pacific altogether. The TC and the STC are a strong clockwise meridional cell in the low latitude ocean and a weaker clockwise meridional cell between 7°N and 18°N, respectively, while the DTC and the subpolar cell are a weaker anticlockwise meridional cell between 3°N and 15°N and a weakest anticlockwise meridional cell between 35°N and 50°N, respectively. The DTC, the TC and the STC are all of very strong seasonal variations. As to the DTC, the southward transport is strongest in fall and weakest in spring. For the TC, the northward transport is strongest in winter and weakest in spring, while the southward transport is strongest in fall and weakest in spring, which is associated with the strong southward fiow of the DTC in fall. As the STC, the northward transport is strongest in winter and weakest in summer, while the southward transport is strongest in summer and weakest in spring. This seasonal difference may be associated with the DTC. The zonal wind stress and the east-west slope of sea level play important roles in the seasonal variations of the TC, the STC and the DTC.展开更多
In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisti...In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisting of MXene and transition metal oxides(TMOs)through efficient electrostatic self-assembly.This three-dimensional network structure has rich heterojunction structures,which can cause a large amount of interface polarization and conduction losses in incident electromagnetic waves.Hollow structures cause multiple reflections and scattering of electromagnetic waves,which is also an important reason for further increasing electromagnetic wave losses.When the doping ratio is 1:1,the system has the best impedance matching,the maximum effective absorption bandwidth(EAB max)can reach 5.12 GHz at 1.7 mm,and the minimum reflection loss(RL_(min))is-50.30 dB at 1.8 mm.This provides a reference for the subsequent formation of 2D-MXene materials into 3D materials.展开更多
This paper presents a three-dimensional particle-in-cell （PIC） simulation of a Ka-band relativistic Cherenkov source with a slow wave structure （SWS） consisting of metal photonic band gap （PBG） structures. In th...This paper presents a three-dimensional particle-in-cell （PIC） simulation of a Ka-band relativistic Cherenkov source with a slow wave structure （SWS） consisting of metal photonic band gap （PBG） structures. In the simulation, a perfect match layer boundary is employed to absorb passing band modes supported by the PBG lattice with an artificial metal boundary. The simulated axial field distributions in the cross section and surface of the SWS demonstrate that the device operates in the vicinity of the π point of a TM01-1ike mode. The Fourier transformation spectra of the axial fields as functions of time and space show that only a single frequency appears at 36.27 GHz, which is in good agreement with that of the intersection of the dispersion curve with the slow space charge wave generated on the beam. The simulation results demonstrate that the SWS has good mode selectivity.展开更多
Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed...Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.展开更多
Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targete...Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targeted observations for individual eddies.A cyclonic eddy surveyed during an oceanographic cruise in the Northwest Pacific Ocean is investigated in this study.The three-dimensional structure of this cyclonic eddy is revealed by observations and simulated by the four-dimensional variational data assimilation(4 DVAR)system combined with the Regional Ocean Modeling System.The observation and assimilation results together present the characteristics of the cyclonic eddy.The cold eddy has an obvious dual-core structure of temperature anomaly.One core is at 50–150 m and another is at 300–550 m,which both have the average temperature anomaly of approximately-3.5℃.The salinity anomaly core is between 250 m and 500 m,which is approximately-0.3.The horizontal velocity structure is axis-asymmetric and it is enhanced on the eastern side of the cold eddy.In the assimilation experiment,sea level anomaly,sea surface temperature,and in situ measurements are assimilated into the system,and the results of assimilation are close to the observations.Based on the high-resolution assimilation output results,the study also diagnoses the vertical velocity in the mesoscale eddy,which reaches the maximum of approximately 10 m/d.The larger vertical velocity is found to be distributed in the range of 0.5 to 1 time of the normalized radius of the eddy.The validation of the simulation result shows that the 4 DVAR method is effective to reconstruct the three-dimensional structure of mesoscale eddy and the research is an application to study the mesoscale eddy in the Northwest Pacific by combining observation and assimilation methods.展开更多
The bis(tributyltin) ester of succinic acid was synthesized by the reaction of disodium salt of succinic acid with tributyltin chloride in a molar ratio of 1:2. The crystal structure was determined by X-ray single-cry...The bis(tributyltin) ester of succinic acid was synthesized by the reaction of disodium salt of succinic acid with tributyltin chloride in a molar ratio of 1:2. The crystal structure was determined by X-ray single-crystal diffraction. It belongs to orthorhombic with space group Pccn, a = 20.949(3), b = 17.470(3), c = 20.345(3) Angstrom, V = 7446(2) Angstrom(3), Z = 8, D-c = 1.242 g/cm(3), mu = 1.365 mm(-1), F(000) = 2864, R = 0.0544 and wR = 0.1417. The tin atom is of five-coordination in a trigonal bipyramidal structure by bridging two carboxylate groups in different directions and the resulting structure which contains straight twist large ring channels along the axes of a, b and c is a three-dimensional framework polymer containing two different tin atoms.展开更多
基金supported by the National Key R&D Program of China(No.2021YFB3501102).
文摘Porous carbon microspheres are widely regarded as a superior CO_(2) adsorbent due to their exceptional efficiency and affordability.However,better adsorption performance is very attractive for porous carbon microspheres.And modification of the pore structure is one of the effective strategies.In this study,multi-cavity mesoporous carbon microspheres were successfully synthesized by the synergistic method of soft and hard templates,during which a phenolic resin with superior thermal stability was employed as the carbon precursor and a mixture of silica sol and F108 as the mesoporous template.Carbon microspheres with multi-cavity mesoporous structures were prepared,and all the samples showed highly even mesopores,with diameters around 12 nm.The diameter of these microspheres decreased from 396.8 nm to about 182.5 nm with the increase of silica sol.After CO_(2) activation,these novel carbon microspheres(APCF0.5-S1.75)demonstrated high specific surface area(983.3 m^(2)/g)and remarkable CO_(2) uptake of 4.93 mmol/g at 0℃ and1 bar.This could be attributed to the unique multi-cavity structure,which offers uniform mesoporous pore channels,minimal CO_(2) transport of and a greater number of active sites for CO_(2) adsorption.
基金support of the Fundamental Research Funds for the Central Universities(No.E2ET0411X2).
文摘In recent years,research investigations have focused on the substantial freshwater storage in the Beaufort Gyre(BG)region due to climate change.Despite active mesoscale eddies in the area,a notable gap in understanding the three-dimensional structure and induced transport has been observed.This study concentrates on the Canada Basin in the western Arctic Ocean,specifically examining a subsurface anticyclonic eddy(SAE)sampled by a Mooring A in the BG region.Hybrid Coordinate Ocean Model(HYCOM)analysis data reveal its lifecycle from February 15 to March 15,2017,marked by initiation,development,maturity,decay,and termination stages.This work extends the finding of SAE passing through Mooring A by examining its overall effects,spatiotemporal variations,and swirl transport.SAE generation through baroclinic instability,which contributes to the westward tilt of the vertical axis,is also confirmed in this study.Swirl transport induced by SAE is predominantly eastward and downward due to its trajectory and background flow.SAE temporarily weakens stratification and extends the subsurface depth but demonstrates transient effects.Moreover,SAE transports upper-layer freshwater,Pacific Winter Water,and Atlantic Water downward,emphasizing its potential influence on freshwater redistribution in the Canadian Basin.This research provides valuable insights into mesoscale eddy dynamics,revealing their role in modulating the upper water mass in the BG region.
基金supported by the National Natural Science Foundation of China(No.51772310)National Natural Science Foundation of China(No.52222202)+3 种基金Chinese Academy of Sciences Key Research Program of Frontier Sciences(No.QYZDYSSWJSC031)Key Deployment Projects of the Chinese Academy of Sciences(No.ZDRW-CN2019-01)Shanghai Sailing Program(No.21YF1454600)Outstanding Chinese and Foreign Youth Exchange Program of China Association of Science and Technology.
文摘In this work,hierarchical hybrid composites consisting of porous three-dimensional reduced graphene oxide(3D-rGO)skeleton and lamellar boron nitride(BN)/silicon carbide(SiC)coatings are prepared by chemical vapor infiltration(CVI)process.The graphene framework prepared by 3D printing and frozen self-assembly exhibits a lightweight structure and a perforated conductive network,which extends the transmission path of incident microwaves.The introduced ceramic coatings can effectively tune the impedance matching degree and supply a lossy phase,and the hierarchical structure of the composites enhances the multiple scattering of the incident microwaves.As expected,the 3D-rGO/BN/SiC composites possess an excellent absorbing performance with a minimum reflection loss value of–37.8 dB,and the widest effective absorbing bandwidth(RL<–10 dB)of 5.90 GHz is obtained.The controllable fabrication of composites can provide a guideline for rational design and fabrication of high-performance electromagnetic waves absorbing materials in practical applications.
基金supported by the Natural Science Foundation of Shandong Province(ZR2022MB019,ZR2021MB134)the National Natural Science Foundation of China(22008131,51974086)。
文摘The dispersibility of active components in hydrodesulfurization(HDS)catalysts significantly influences the corresponding catalytic performance.In this study,sugar-based materials(glucose,chitosan,soluble starch,and corn starch)were utilized to prepare CoMo bulk HDS catalysts through a sugar foaming process.The foaming intermediates were analyzed using TG,FTIR,and Raman techniques to investigate the pyrolysis and carbonization process,revealing the presence of graphitic carbon in the 3 DPG,3 DPSS,and 3 DPCS catalysts even after calcination in an air atmosphere.The catalysts were further characterized using SEM,XRD,TEM,low-temperature N_(2) physical adsorption,and XPS.The 3 DPSS catalyst exhibited a thiophene conversion of 94.8%at 360℃ and 1 MPa,which could be ascribed to its unique three-dimensional pore structure,high dispersion of MoS_(2)(0.21),and high fraction of Mo^(4+)(83.14%).This study demonstrates the potential of using the sugar foaming technique to develop highly efficient HDS catalysts and provides new insights into the relationship between the physicochemical properties of the obtained catalysts and their catalytic performance.
基金supported by the National Key R&D Program of China(Grant No.2021YFC2501700).
文摘The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design mechanical equivalent porous structures for artificial femoral heads.Firstly,supported by Micro and clinical CT scans of 21 bone specimens,the anisotropic mechanical parameters of human cancellous bone in the femoral head were characterized using clinical CT values(Hounsfield unit).After that,the equivalent porous structure of cancellous bone was designed based on the gyroid surface,the influence of its degree of anisotropy and volume fraction on the macroscopic mechanical parameters was investigated by finite element analysis.Furthermore,a mapping relationship between CT values and the porous structure was established by jointly solving the mechanical parameters of the porous structure and human cancellous bone,allowing the design of personalized gradient porous structures based on clinical CT images.Finally,to verify the mechanical equivalence,implant press-in tests were conducted on 3D-printed artificial femoral heads and human femoral heads,the influence of the porous structure’s cell size in bone-implant interaction problems was also explored.Results showed that the minimum deviations of press-in stiffness(<15%)and peak load(<5%)both occurred when the cell size was 20%to 30%of the implant diameter.In conclusion,the designed porous structure can replicate the human cancellous bone-implant interaction at a high level,indicating its effectiveness in optimizing the mechanical performance of 3D-printed artificial femoral head.
文摘This article aims to develop a head pursuit （HP） guidance law for three-dimensional hypervelocity interception, so that the effect of the perturbation induced by seeker detection can be reduced. On the basis of a novel HP three-dimensional guidance model, a nonlinear variable structure guidance law is presented by using Lyapunov stability theory. The guidance law positions the interceptor ahead of the target on its tlight trajectory, and the speed of the interceptor is required to be lower than that of the target, A numerical example of maneuvering ballistic target interception verifies the rightness of the guidance model and the effectiveness of the proposed method.
文摘The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.
基金Science and Technology Planning Project of Inner Mongolia Science and Technology Department(2022YFSH0021)Key Research and Development Program of Shaanxi Province(2024SF2-GJHX-14,2021SF-296)。
文摘Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.
基金supported by the National Key Research and Development Program of China(No.2022YFE03130000)。
文摘Faced with complex operational environments,liquid metal divertors are considered alternative solutions to traditional solid divertors.Experiments have been conducted using a self-designed embedded multichannel capillary porous structure(EM-CPS)for plasma irradiation of lithium(Li)-prefilled EM-CPS in the high-density linear plasma device(SCU-PSI).The optical image analysis of the interaction region between the plasma and Li vapor shows that the region is not a regular geometric shape and the point of strongest light emission appears 1–2 cm in front of the target rather than on its surface.The irregularity is due to the uneven distribution and density of the Li vapor,as well as the radial and axial attenuation of the plasma.As the plasma discharge parameters increase,the vapor profile initially expands globally and then contracts locally,with the point of the strongest light emission gradually moving towards the target surface.The spectral lines of Li 670.78 nm and Ar 763.51 nm in the interaction region are produced by deexcitation.These lines gradually decrease in intensity along the axial direction,which is close to the trend of light emission intensity that initially increases and then decreases along the same direction.These findings provide a reference for studying the interaction mechanism between plasma and liquid Li capillary porous structures in linear plasma devices and future tokamak.
基金financial support by the National Natural Science Foundation of China(No.21805017)。
文摘With the impact of energy crisis and environmental problems,it is urgent to develop green sustainable energy.Osmotic energy stored in the salinity difference between seawater and river water is one of the sustainable,abundant,and renewable energy.However,the membranes used to capture osmotic energy by reverse electrodialysis(RED)always suffer from low ion selectivity,low stability and low power.Hydrogels with three-dimensional(3D)networks have shown great potential for ion transportation and energy conversion.In this work,based on the homogeneity and porosity characteristics of acrylamide(AM)hydrogel,as well as the remarkable stability and abundant negative charge of 3-sulfopropyl acrylate potassium salt(SPAK),a high-performance AM/SPAK cation-selective hydrogel membrane was successfully developed for harvesting osmotic energy.Compared to AM hydrogels,utilizing AM/SPAK as a monomer mixture greatly facilitated the preparation of homogeneous polymers,exhibiting a porous structure,exceptional ion selectivity,and remarkable stability.A maximum output power density of 13.73 W/m^(2)was achieved at a 50-fold NaCl concentration gradient,exceeding the commercial requirement of 5 W/m^(2).This work broadens the idea for the construction and application of composite hydrogel in high efficiency osmotic energy conversion.
基金The authors wish to acknowledge financial support from the National Natural Science Foundation of China(51822407 and 51774327)Natural Science Foundation of Hunan Province in China(2018JJ1037)Innovation Driven project of Central South University(2020CX014).
文摘Microseismic/acoustic emission(MS/AE)source localization method is crucial for predicting and controlling of potentially dangerous sources of complex structures.However,the locating errors induced by both the irregular structure and pre-measured velocity are poorly understood in existing methods.To meet the high-accuracy locating requirements in complex three-dimensional hole-containing structures,a velocity-free MS/AE source location method is developed in this paper.It avoids manual repetitive training by using equidistant grid points to search the path,which introduces A*search algorithm and uses grid points to accommodate complex structures with irregular holes.It also takes advantage of the velocity-free source location method.To verify the validity of the proposed method,lead-breaking tests were performed on a cubic concrete test specimen with a size of 10 cm10 cm10 cm.It was cut out into a cylindrical empty space with a size of/6cm10 cm.Based on the arrivals,the classical Geiger method and the proposed method are used to locate lead-breaking sources.Results show that the locating error of the proposed method is 1.20 cm,which is less than 2.02 cm of the Geiger method.Hence,the proposed method can effectively locate sources in the complex three-dimensional structure with holes and achieve higher precision requirements.
基金supported by the National Natural Science Foundation of China(52175270)the Project of Scientifc and Technological Development Plan of Jilin Province(20220508130RC)+3 种基金the Science and Technology Development Program of Jilin Province(YDZJ202501ZYTS370)the Scientific Research Project of Education Department of Jilin Province(JJKH20251196KJ)the Scientific Research Project of Education Department of Jilin Province(JJKH20251195KJ)the Key Project of State Key Laboratory of Changchun City(23GZZ14).
文摘Flexible piezoresistive sensors based on biomimetic microstructures are prospective for broad application in motion monitoring.However,the design and preparation processes of most biomimetic microstructures in the existing studies are complicated,and there are few studies on pore size control.Herein,the porous structure of human bones was used as a biomimetic prototype,and optimally designed by creating a theoretical equivalent sensor model and a finite element model.Soluble raw materials such as sugar and salt in different particle sizes were pressed into porous templates.Based on the template method,porous structures in different pore sizes were prepared using polydimethylsiloxane(PDMS)polymer as the substrate.On this basis,graphene oxide conductive coating was prepared with the modified Hummers method and then deposited via dip coating onto the substrate.Finally,a PDMS-based porous structure biomimetic flexible piezoresistive sensor was developed.Mechanically,the deformation of the sensor under the same load increased with the pore size rising from 0.3 to 1.5 mm.Electrically,the resistance rang of the sensor was enlarged as the pore size rose.The resistance variation rates of samples with pore sizes of 0.3,1.0,and 1.5 mm at approximately the 200th cycle were 63%,79%,and 81%,respectively;at the 500th cycle,these values were 63%,77%,and 79%;and at the 1000th cycle,they stabilized at 63%,74%,and 76%.These results indicate that the fabricated sensor exhibits high stability and fatigue resistance.At the pressure of 0–25 kPa,the sensitivity rose from 0.0688 to 0.1260 kPa−1,and the performance was enhanced by 83%.After 1,000 cycles of compression testing,the signal output was stable,and no damage was caused to the substrate.Further application tests showed the biomimetic sensor accurately and effectively identified human joint motions and gestures,and has potential application value in human motion monitoring.
基金supported by the National Key Research and Development Program of China(No.2019YFA0110600)the Science and Technology Support Program of Sichuan Province(No.2019YJ0161).
文摘Hierarchical porous structure,which include macropores,minor pores,and micropores in scaffolds,are essential in the multiple biological functions of bone repair and regeneration.In this study,patientcustomized calcium-deficient hydroxyapatite(CDHA)scaffolds with three-level hierarchical porous structure were fabricated by indirect 3D printing technology and particulate leaching method.The sacrificial template scaffolds were fabricated using a photo-curing 3D printer,which provided a prerequisite for the integral structure and interconnected macropores of CDHA scaffolds.Additionally,20 wt%pore former was incorporated into the slurry to enhance the content of smaller pores within the CDHA-2 scaffolds,and then the CDHA-2 scaffolds were sintered to remove the sacrificial template scaffolds and pore former.The obtained CDHA-2 scaffolds exhibited interconnected macropores(300-400μm),minor pores(∼10-100μm),and micropores(<10μm)distributed throughout the scaffolds,which could promote bone tissue ingrowth,increase surface roughness,and enhance protein adsorption of scaffolds.In vitro studies identified that CDHA-2 scaffolds had nanocrystal grains,high specific surface area,and outstanding protein adsorption capacity,which could provide a microenvironment for cell adhesion,spreading,and proliferation.In addition,the murine intramuscular implantation experiment suggested that CDHA-2 scaffolds exhibited excellent osteoinductivity and were superior to traditional BCP ceramics under conditions without the addition of live cells and exogenous growth factors.The rabbit calvarial defect repair results indicated that CDHA-2 scaffolds could enhance in situ bone regeneration.In conclusion,these findings demonstrated that the hierarchical porous structure of CDHA scaffolds was a pivotal factor in modulating osteoinductivity and bone regeneration,and CDHA-2 scaffolds were potential candidates for bone regeneration.
基金Supported by the National Key R&D Program of China(No.2018YFC1406202)the National Natural Science Foundation of China(Nos.41830964,41976188,41605051)。
文摘As in-situ observations are sparse,targeted observations of a specific mesoscale eddy are rare.Therefore,it is difficult to study the three-dimensional structure of moving mesoscale eddies.From April to September 2014,an anticyclonic eddy located at 135°E-155°E,26°N-42°N was observed using 17 rapidsampling Argo floats,and the spatiotemporal variations in the three-dimensional structure were studied.The results are as follows:(1)the eddy was identified and tracked using satellite altimeter data.It had a lifetime of 269 days and an average radius of 91.5 km.The lifetime of the eddy can be divided into three phases,i.e.,the initiation,maturity,and termination phases.The depth of its influence reached 1000 m;(2)the Argo profiles were divided into seven periods(approximately 20 days in each)for composite analysis,and the composite Argo profiles and CARS2009(CSIRO Atlas of Regional Seas)climatology data were merged following the data-interpolating variational analysis(DIVA)method to reconstruct the three-dimensional structure.The temperature and salinity anomaly cores of the anticyclonic mesoscale eddy are located from 400 to 600 m.From 800 to 900 m,there is an area of low salinity at the center of the eddy.A high concentration anomaly of dissolved oxygen was located at approximately 250 m;(3)to better understand the features of the eddy and its interaction with the surroundings,we calculated the anomalous velocity of the geostrophic flow and the heat,salt,dissolved oxygen transport anomaly,and discussed the eddy's origin and its adjustments to topography.The maximum heat,salt,and oxygen transport caused by eddy were 9.37×10^11 W,3.08×10^3 kg/s,and 2.70×10^2 kg/s,which all occurred during the termination phase.This study highlights the applicability of using Argo floats to understand the three-dimensional structure thermohaline features of eddies in the North Pacific.
基金Supported by the National Basic Research Development Program of China(973 Program)under contract Nos 2007CB816002,2007CB816005the innovative key project of Chinese Academy of Sciences under contract No.KZCXZ-YW-201
文摘The three-dimensional structure and the seasonal variation of the North Pacific meridional overturning circulation （NPMOC） are analyzed based on the Simple Ocean Data Assimilation data and Argo profiling float data. The NPMOC displays a multi-cell structure with four cells in the North Pacific altogether. The TC and the STC are a strong clockwise meridional cell in the low latitude ocean and a weaker clockwise meridional cell between 7°N and 18°N, respectively, while the DTC and the subpolar cell are a weaker anticlockwise meridional cell between 3°N and 15°N and a weakest anticlockwise meridional cell between 35°N and 50°N, respectively. The DTC, the TC and the STC are all of very strong seasonal variations. As to the DTC, the southward transport is strongest in fall and weakest in spring. For the TC, the northward transport is strongest in winter and weakest in spring, while the southward transport is strongest in fall and weakest in spring, which is associated with the strong southward fiow of the DTC in fall. As the STC, the northward transport is strongest in winter and weakest in summer, while the southward transport is strongest in summer and weakest in spring. This seasonal difference may be associated with the DTC. The zonal wind stress and the east-west slope of sea level play important roles in the seasonal variations of the TC, the STC and the DTC.
基金supported by the National Natural Science Foundation of China(Nos.51407134,52002196)Natural Science Foundation of Shandong Province(Nos.ZR2019YQ24,ZR2020QF084)+1 种基金Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202103057)the Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites)and Special Financial of Shandong Province(Structural Design of High-efficiency Electromagnetic Wave-absorbing Composite Materials and Construction of Shandong Provincial Talent Teams(No.37000022P990304116449)).
文摘In order to obtain high-performance electromagnetic wave absorbers,the adjustment of structure and components is essential.Based on the above requirements,this system forms a three-dimensional frame structure consisting of MXene and transition metal oxides(TMOs)through efficient electrostatic self-assembly.This three-dimensional network structure has rich heterojunction structures,which can cause a large amount of interface polarization and conduction losses in incident electromagnetic waves.Hollow structures cause multiple reflections and scattering of electromagnetic waves,which is also an important reason for further increasing electromagnetic wave losses.When the doping ratio is 1:1,the system has the best impedance matching,the maximum effective absorption bandwidth(EAB max)can reach 5.12 GHz at 1.7 mm,and the minimum reflection loss(RL_(min))is-50.30 dB at 1.8 mm.This provides a reference for the subsequent formation of 2D-MXene materials into 3D materials.
基金Project supported by the National Key Basic Research Program of China (Grant No 2007CB31040)the National Natural Science Foundation of China (Grant No 60571020)
文摘This paper presents a three-dimensional particle-in-cell （PIC） simulation of a Ka-band relativistic Cherenkov source with a slow wave structure （SWS） consisting of metal photonic band gap （PBG） structures. In the simulation, a perfect match layer boundary is employed to absorb passing band modes supported by the PBG lattice with an artificial metal boundary. The simulated axial field distributions in the cross section and surface of the SWS demonstrate that the device operates in the vicinity of the π point of a TM01-1ike mode. The Fourier transformation spectra of the axial fields as functions of time and space show that only a single frequency appears at 36.27 GHz, which is in good agreement with that of the intersection of the dispersion curve with the slow space charge wave generated on the beam. The simulation results demonstrate that the SWS has good mode selectivity.
基金Supported by the Major State Basic Research Development Program of China(2011CB706501)the National Natural Science Foundation of China(51276157)
文摘Characterizing the complex two-phase hydrodynamics in structured packed columns requires a power- ful modeling tool. The traditional two-dimensional model exhibits limitations when one attempts to model the de- tailed two-phase flow inside the columns. The present paper presents a three-dimensional computational fluid dy- namics （CFD） model to simulate the two-phase flow in a representative unit of the column. The unit consists of an CFD calculations on column packed with Flexipak 1Y were implemented within the volume of fluid （VOF） mathe- matical framework. The CFD model was validated by comparing the calculated thickness of liquid film with the available experimental data. Special attention was given to quantitative analysis of the effects of gravity on the hy- drodynamics. Fluctuations in the liquid mass flow rate and the calculated pressure drop loss were found to be quali- tatively in agreement with the experimental observations.
基金The National Key R&D Program of China under contract No.2018YFC1406202the National Natural Science Foundation of China under contract Nos 41811530301,41830964 and 41976188。
文摘Mesoscale eddies play an important role in modulating the ocean circulation.Many previous studies on the threedimensional structure of mesoscale eddies were mainly based on composite analysis,and there are few targeted observations for individual eddies.A cyclonic eddy surveyed during an oceanographic cruise in the Northwest Pacific Ocean is investigated in this study.The three-dimensional structure of this cyclonic eddy is revealed by observations and simulated by the four-dimensional variational data assimilation(4 DVAR)system combined with the Regional Ocean Modeling System.The observation and assimilation results together present the characteristics of the cyclonic eddy.The cold eddy has an obvious dual-core structure of temperature anomaly.One core is at 50–150 m and another is at 300–550 m,which both have the average temperature anomaly of approximately-3.5℃.The salinity anomaly core is between 250 m and 500 m,which is approximately-0.3.The horizontal velocity structure is axis-asymmetric and it is enhanced on the eastern side of the cold eddy.In the assimilation experiment,sea level anomaly,sea surface temperature,and in situ measurements are assimilated into the system,and the results of assimilation are close to the observations.Based on the high-resolution assimilation output results,the study also diagnoses the vertical velocity in the mesoscale eddy,which reaches the maximum of approximately 10 m/d.The larger vertical velocity is found to be distributed in the range of 0.5 to 1 time of the normalized radius of the eddy.The validation of the simulation result shows that the 4 DVAR method is effective to reconstruct the three-dimensional structure of mesoscale eddy and the research is an application to study the mesoscale eddy in the Northwest Pacific by combining observation and assimilation methods.
基金the National Natural Science Foundation of China (No. 20271025)the Natural Science Foundation of Shandong province (No. Z2001B02)the State Key Laboratory of Crystal Materials,Shandong University
文摘The bis(tributyltin) ester of succinic acid was synthesized by the reaction of disodium salt of succinic acid with tributyltin chloride in a molar ratio of 1:2. The crystal structure was determined by X-ray single-crystal diffraction. It belongs to orthorhombic with space group Pccn, a = 20.949(3), b = 17.470(3), c = 20.345(3) Angstrom, V = 7446(2) Angstrom(3), Z = 8, D-c = 1.242 g/cm(3), mu = 1.365 mm(-1), F(000) = 2864, R = 0.0544 and wR = 0.1417. The tin atom is of five-coordination in a trigonal bipyramidal structure by bridging two carboxylate groups in different directions and the resulting structure which contains straight twist large ring channels along the axes of a, b and c is a three-dimensional framework polymer containing two different tin atoms.
