We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the micr...We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.展开更多
The functionally graded thermal barrier coatings （FG-TBCs） with 80%ZrO2-13%CeO2-7%Y2O3 （C-YSZ）/NiCoCrAlY were prepared using a recently developed supersonic plasma spraying（S-PS） with dual powder feed ports syst...The functionally graded thermal barrier coatings （FG-TBCs） with 80%ZrO2-13%CeO2-7%Y2O3 （C-YSZ）/NiCoCrAlY were prepared using a recently developed supersonic plasma spraying（S-PS） with dual powder feed ports system. The thermal shock experiment of FG-TBCs specimens was carried out by means of the automatic thermal cycle device, in which the samples were heated to 1200℃ by oxygen-acetylene flame jet then water-quenched to ambient temperature. The temperature—time curves of specimens and photographs can be watched on-line and recorded by a computer during the test. The results show that the totally 1mm-thick FG-TBCs have excellent thermal shock resistance due to the fact that the coatings have no any peeling-off after 200 thermal cycles. The microstructures and morphologies of FG-TBCs were characterized and analyzed by SEM.展开更多
We employ the coherent thermal states(a kind of entangled states)in thermal field dynamics to establisha complete entangled state formalism expressing pseudo-classical representations of density operator for light fie...We employ the coherent thermal states(a kind of entangled states)in thermal field dynamics to establisha complete entangled state formalism expressing pseudo-classical representations of density operator for light field.Especially,the relationship between the coherent thermal state and the characteristic function and the positive Prepresentation in quantum optics theory are obtained.展开更多
A series of β-cyclodextrin （CDs） functionalized graphene nanohybrids have been successfully fabricated utilizing the classical covalent modification methods at different reaction temperatures. It is very interesti...A series of β-cyclodextrin （CDs） functionalized graphene nanohybrids have been successfully fabricated utilizing the classical covalent modification methods at different reaction temperatures. It is very interesting that although both CDs and graphene oxide （GO） could he easily decomposed, the effective combination of GO with CDs leads to significantly enhanced thermal stability of graphene derivatives （GO-CDs）. Moreover, the introduction of CDs could dramatically improve the dispersibility promotion of our products in both polar/protic and nonpolar/aprotic solvents, which will contribute to the preparation of polymer nanocomposites and increase of their thermal stability. The improved thermal degradation temperatures can be obtained for polyvinyl alcohol after filling with as little as 1 wt.% of the hybrid. The obtained products could be potentially used in heat-retardant or thermal-control materials.展开更多
The accurate analyses for a plate fin heat sink with the ability to control the temperature of the avionics devices within a pre-set controllable temperature range are required both in the process of circuit design an...The accurate analyses for a plate fin heat sink with the ability to control the temperature of the avionics devices within a pre-set controllable temperature range are required both in the process of circuit design and for the real-time temperature monitoring purposes. In order to provide an insight into the behavior of the temperature of a plate fin heat sink subjected non-uniform heat density on the surfaces, it is necessary to obtain accurate analytical solutions yielding explicit formulas relating the dissipated power to the temperature rise at any point of avionics devices. This paper presents a method for thermal simulation of a plate fin heat sink using an analytical solution of the three-dimensional heat equation resulting from an appropriate plate fin heat sink transient thermal model. The entire solution methodology is illustrated in detail on the particular examples of the plate fin heat sink subjected non-uniform heat density on the surfaces. The transient temperature profiles are obtained for different positions at the surface of the plate fin heat sink. The analytical results are compared with measurements made on the surface of the cold plate and it is found that they are in good agreement with an error of less than 3 K.展开更多
Thermal buckling response of functionally graded plates is presented in this paper using sinusoidal shear deformation plate theory (SPT). The material properties of the plate are assumed to vary according to a power l...Thermal buckling response of functionally graded plates is presented in this paper using sinusoidal shear deformation plate theory (SPT). The material properties of the plate are assumed to vary according to a power law form in the thickness direction. Equilibrium and stability equations are derived based on the SPT. The non-linear governing equations are solved for plates subjected to simply supported boundary conditions. The buckling analysis of a functionally graded plate under various types of thermal loads is carried out. The influences of many plate parameters on buckling temperature difference will be investigated. Numerical results are presented for the SPT, demonstrating its importance and accuracy in comparison to other theories.展开更多
Refractory materials are subjected to mechanical and chemical loads during application,which respectively lead to fracture and corrosion. The understanding of the mechanical fracture and the microstructural modificati...Refractory materials are subjected to mechanical and chemical loads during application,which respectively lead to fracture and corrosion. The understanding of the mechanical fracture and the microstructural modification after progressive thermal shocks is necessary for the suitable design of high performance refractory materials.The fracture process zone can be divided into two areas,where different toughening mechanisms are likely to take place： the crack tip and the following process region called wake region. In this study,the emphasis is laid on the microstructural mechanisms occurring in the wake region of the crack and the crack tip. Therefore,functional aggregates,namely fused eutectic aggregates of Al2O3- ZrO 2- SiO 2and Al2O3- ZrO 2,and andalusite,are added to a model high alumina castable formulation based on tabular alumina. The discrepancy in thermal behavior between aggregates and matrix as well as phase transformation such as mullite formation favor further the nucleation of microcracks that reduce the stress field at the level of the crack tip. Two different grain fractions of tabular alumina（ 0. 2- 0. 6 mm or2. 24- 3. 00 mm） are substituted by these functional aggregates. After sintering at 1 500 ℃ for 6 h,the samplesare quenched up to 10 times in air without pressure from950 ℃ to room temperature. The resulting elastic properties are examined after each thermal shock cycle,as well as the residual bending strength after 0,1,3,5,7and 10 thermal shocks. These results are correlated with Scanning Electron Microscopy analyses after the different thermal shock cycles.展开更多
A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulati...A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.展开更多
The thermal and thermo-elastic-plastic response of newly developed ceramic-metal functionally graded materials under a thermal shock load is studied. The materials are heated at the ceramic surface with a sudden high-...The thermal and thermo-elastic-plastic response of newly developed ceramic-metal functionally graded materials under a thermal shock load is studied. The materials are heated at the ceramic surface with a sudden high-intensity heat flux input, and cooled at the metal surface with a flowing liquid nitrogen. Emphasis is placed on two aspects: (1) the influence of the graded composition of the materials on the temperature and stress response; and (2) the optimum design of the graded composition from a unified viewpoint of the heat insulation property and stress relaxation property. Moreover, a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is also made to indicate the plasticity effect.展开更多
Conventional heat transfer fluids usually have low thermal conductivity, limiting their efficiency in many applications. Many experiments have shown that adding nanosize solid particles to conventional fluids can grea...Conventional heat transfer fluids usually have low thermal conductivity, limiting their efficiency in many applications. Many experiments have shown that adding nanosize solid particles to conventional fluids can greatly enhance their thermal conductivity. To explain this anomalous phenomenon, many theoretical investigations have been conducted in recent years. Some of this research has indicated that the particle agglomeration effect that commonly occurs in nanofluids should play an important role in such enhancement of the thermal conductivity, while some have shown that the enhancement of the effective thermal conductivity might be accounted for by the structure of nanofluids, which can be described using the radial distribution function of particles. However, theoretical predictions from these studies are not in very good agreement with experimental results. This paper proposes a prediction model for the effective thermal conductivity of nanofluids, considering both the agglomeration effect and the radial distribution function of nanoparticles. The resulting theoretical predictions for several sets of nanofluids are highly consistent with experimental data.展开更多
The non-linear governing differential equations of immovably simply supported flanctionally graded material （FGM） rod subjected to thermal loads were derived. The thermal post-buckling behaviors of FGM rod made of Z...The non-linear governing differential equations of immovably simply supported flanctionally graded material （FGM） rod subjected to thermal loads were derived. The thermal post-buckling behaviors of FGM rod made of ZrO2 and Ti-6Al-4Vwere anaiyzed by shooting method. Firstly, the thermal post-buckling equilibrium paths of the FGM rod with different gradient index in the uniform temperature field were plotted, and compared with the behaviors of the homogeneous rods made of ZrO2 and Ti-6Al-4V materials, respectively. For given value of end rotation angles, the influence of gradient index on the thermal post-buckling behaviors of FGM rod was discussed. Secondly, the thermal post-buckling characteristics of the FGM rod were analyzed when the temper- ature difference parameter is changed while the bottom temperature parameter remains constant, and when the bottom temperature parameter is changed while the temperature difference parameter remains constant, and compared with the characteristics of the two homogeneous material rods.展开更多
A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids....A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids. A great number of materials have potential to be used in nanoparticles production and then in nanofluids;one of them is Multi-Walled Carbon Nano Tubes (MWCNT). They have thermal conductivity around 3000 W/mK while other materials used as nanoparticles like CuO have thermal conductivity of 76.5 W/mK. Due to this fact, MWCNT nanoparticles have potential to be used in nanofluids production, aiming to increase heat transfer rate in energy systems. In this context, the main goal of this paper is to evaluate from the synthesis to the experimental measurement of thermal conductivity of nanofluid samples based on functionalized (-OH) MWCNT nanoparticles. They will be analyzed nanoparticles with different functionalization degrees (4% wt, 6% wt, and 9% wt). In addition, it will be quantified other thermophysical properties (dynamic viscosity, specific heat and specific mass) of the synthetized nanofluids. So, the present work can contribute with experimental data that will help researches in the study and development of MWCNT nanofluids. According to the results, the maximum increment obtained in thermal conductivity was 10.65% in relation to the base fluid (water).展开更多
This work examines the fracture behavior of a functionally graded material （FGM） plate containing parallel surface cracks with alternating lengths subjected to a thermal shock. The thermal stress intensity factors ...This work examines the fracture behavior of a functionally graded material （FGM） plate containing parallel surface cracks with alternating lengths subjected to a thermal shock. The thermal stress intensity factors （TSIFs） at the tips of long and short cracks are calculated using a singular integral equation technique. The critical thermal shock △Tc that causes crack initiation is calculated using a stress intensity factor criterion. Numerical examples of TSIFs and △Tc for an Al2O3/Si3N4 FGM plate are presented to illustrate the effects of thermal property gradation, crack spacing and crack length ratio on the TSIFs and △Tc. It is found that for a given crack length ratio, the TSIFs at the tips of both long and short cracks can be reduced significantly and △Tc can be enhanced by introducing appropriate material gradation. The TSIFs also decrease dramatically with a decrease in crack spacing. The TSIF at the tips of short cracks may be higher than that for the long cracks under certain crack geometry conditions. Hence, the short cracks instead of long cracks may first start to grow under the thermal shock loading.展开更多
Cu/Ti3AlC2 composite and functional-gradient materials with excellent electrical conductivity and thermal conductivity as well as good flexural properties were prepared by low-temperature spark plasma sintering of Cu ...Cu/Ti3AlC2 composite and functional-gradient materials with excellent electrical conductivity and thermal conductivity as well as good flexural properties were prepared by low-temperature spark plasma sintering of Cu and Ti3AlC2 powder mixtures. The phase compositions of the materials were analyzed by X-ray diffraction, and their microstructure was characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. Further, the electrical conductivity, thermal conductivity, and flexural properties of the materials were tested. Results show that, for the composite materials, the resistivity rises from 0.75 × 10^-7 Ω·m only to 1.32 × 10^-7 Ω·m and the thermal diffusivity reduces from 82.5 mm^2/s simply to 39.8 mm^2/s, while the flexural strength improves from 412.9 MPa to 471.3 MPa, as the content of Ti3AlC2 is increased from 5 wt%to 25 wt%. Additionally, the functional-gradient materials sintered without interface between the layers exhibit good designability, and their overall electrical conductivity, thermal conductivity, and flexural strength are all higher than those of the corresponding uniform composite material.展开更多
By using the technique of integration within an ordered product of operators, the normal ordered density operator of the photon-subtracted squeezed thermal state （PSSTS） is derived. Then the corresponding Wigner fun...By using the technique of integration within an ordered product of operators, the normal ordered density operator of the photon-subtracted squeezed thermal state （PSSTS） is derived. Then the corresponding Wigner function is presented by using the coherent state representation of the Wigner operator. The nonclassical properties of the PSSTS are discussed based on the negativity of the Wigner function.展开更多
Based on the thermal stress distribution for functionally gradient material (FGM) plates, a Genetic Algorithm (GA) method for the thermal stresses optimum design of FGM plate with computer technologies is given. The m...Based on the thermal stress distribution for functionally gradient material (FGM) plates, a Genetic Algorithm (GA) method for the thermal stresses optimum design of FGM plate with computer technologies is given. The minimum thermal stresses combination distribution for FGM is obtained.展开更多
The thermal stresses relaxation of Ni/NiFe2O4 system functionally graded cermet inert anode for aluminum electrolysis was optimally designed. The transient thermal stresses of the inert anode under complex boundary co...The thermal stresses relaxation of Ni/NiFe2O4 system functionally graded cermet inert anode for aluminum electrolysis was optimally designed. The transient thermal stresses of the inert anode under complex boundary condition during high-temp （955℃） electrolysis were calculated using the finite-element software ANSYS, the influence of different parameters on the distribution of the thermal stresses were analyzed. The results showed that, during the process of thermal shock, the thermal hoop tensile stress on the surface of the anode is very large, which is possibly the major cause of anode crack; when the radius of the anode is between 0.05-0.15m, a range that can be realized by recent manufacturing technology, the optimum composition distribution exponent p is 0.25; The hoop tensile stresses reduce with the decrease of anode scale and also decrease with the decrease of the convection coefficient between the electrolyte and the anode.展开更多
In this paper, the composite cylinder system is made of three layers: metal, functionally gradient material (FGM) and ceramics is studied. The formulas of the steady_state temperature distribution and the associate th...In this paper, the composite cylinder system is made of three layers: metal, functionally gradient material (FGM) and ceramics is studied. The formulas of the steady_state temperature distribution and the associate thermal stress distribution in the cylinder are obtained. For ZrO 2/Ti_6Al_4V system, the distribution of steady_state temperature and thermal stress are calculated and discussed.展开更多
Analysis of thermal post-buckling of FGM （Functionally Graded Material） Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transve...Analysis of thermal post-buckling of FGM （Functionally Graded Material） Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transverse shear deformation in the sense of theory of Timoshenko beam, geometrical nonlinear governing equations including seven basic unknown functions for functionally graded beams subjected to mechanical and thermal loads were formulated. In the analysis, it was assumed that the material properties of the beam vary continuously as a power function of the thickness coordinate. By using a shooting method, the obtained nonlinear boundary value problem was numerically solved and thermal buckling and post-buckling response of transversely nonuniformly heated FGM Timoshenko beams with fixed-fixed edges were obtained. Characteristic curves of the buckling deformation of the beam varying with thermal load and the power law index are plotted. The effects of material gradient property on the buckling deformation and critical temperature of beam were discussed in details. The results show that there exists the tension-bend coupling deformation in the uniformly heated beam because of the transversely non-uniform characteristic of materials.展开更多
文摘We present a bidirectional reflection distribution function （BRDF） model for thermal coating surfaces based on a three-component reflection assumption, in which the specular reflection is given according to the microfacet theory and Snell＇s law, the multiple reflection is considered Nth cosine distributed, and the volume scattering is uniformly distributed in reflection angles according to the experimental results. This model describes the reflection characteristics of thermal coating surfaces more completely and reasonably. Simulation and measurement results of two thermal coating samples SR107 and S781 are given to validate that this three-component model significantly improves the modeling accuracy for thermal coating surfaces compared with the existing BRDF models.
文摘The functionally graded thermal barrier coatings （FG-TBCs） with 80%ZrO2-13%CeO2-7%Y2O3 （C-YSZ）/NiCoCrAlY were prepared using a recently developed supersonic plasma spraying（S-PS） with dual powder feed ports system. The thermal shock experiment of FG-TBCs specimens was carried out by means of the automatic thermal cycle device, in which the samples were heated to 1200℃ by oxygen-acetylene flame jet then water-quenched to ambient temperature. The temperature—time curves of specimens and photographs can be watched on-line and recorded by a computer during the test. The results show that the totally 1mm-thick FG-TBCs have excellent thermal shock resistance due to the fact that the coatings have no any peeling-off after 200 thermal cycles. The microstructures and morphologies of FG-TBCs were characterized and analyzed by SEM.
基金the President Foundation of the Chinese Academy of Sciences
文摘We employ the coherent thermal states(a kind of entangled states)in thermal field dynamics to establisha complete entangled state formalism expressing pseudo-classical representations of density operator for light field.Especially,the relationship between the coherent thermal state and the characteristic function and the positive Prepresentation in quantum optics theory are obtained.
基金supported by China Postdoctoral Science Foundation Funded Project(No.20100481146)Jiangsu Planned Projects for Postdoctoral Research Funds(No.1002015C)+2 种基金Natural Science Foundation of Jiangsu Province(No.BK2011712, BK20130575)National University Student Innovation Program(No.201210288036)NJUST Opening Measuring Fund of Large Precious Apparatus(No.2012-01-15)
文摘A series of β-cyclodextrin （CDs） functionalized graphene nanohybrids have been successfully fabricated utilizing the classical covalent modification methods at different reaction temperatures. It is very interesting that although both CDs and graphene oxide （GO） could he easily decomposed, the effective combination of GO with CDs leads to significantly enhanced thermal stability of graphene derivatives （GO-CDs）. Moreover, the introduction of CDs could dramatically improve the dispersibility promotion of our products in both polar/protic and nonpolar/aprotic solvents, which will contribute to the preparation of polymer nanocomposites and increase of their thermal stability. The improved thermal degradation temperatures can be obtained for polyvinyl alcohol after filling with as little as 1 wt.% of the hybrid. The obtained products could be potentially used in heat-retardant or thermal-control materials.
基金Aeronautical Science Foundation of China （2008ZC52024）
文摘The accurate analyses for a plate fin heat sink with the ability to control the temperature of the avionics devices within a pre-set controllable temperature range are required both in the process of circuit design and for the real-time temperature monitoring purposes. In order to provide an insight into the behavior of the temperature of a plate fin heat sink subjected non-uniform heat density on the surfaces, it is necessary to obtain accurate analytical solutions yielding explicit formulas relating the dissipated power to the temperature rise at any point of avionics devices. This paper presents a method for thermal simulation of a plate fin heat sink using an analytical solution of the three-dimensional heat equation resulting from an appropriate plate fin heat sink transient thermal model. The entire solution methodology is illustrated in detail on the particular examples of the plate fin heat sink subjected non-uniform heat density on the surfaces. The transient temperature profiles are obtained for different positions at the surface of the plate fin heat sink. The analytical results are compared with measurements made on the surface of the cold plate and it is found that they are in good agreement with an error of less than 3 K.
文摘Thermal buckling response of functionally graded plates is presented in this paper using sinusoidal shear deformation plate theory (SPT). The material properties of the plate are assumed to vary according to a power law form in the thickness direction. Equilibrium and stability equations are derived based on the SPT. The non-linear governing equations are solved for plates subjected to simply supported boundary conditions. The buckling analysis of a functionally graded plate under various types of thermal loads is carried out. The influences of many plate parameters on buckling temperature difference will be investigated. Numerical results are presented for the SPT, demonstrating its importance and accuracy in comparison to other theories.
基金the Federation for International Refractory Research and Education ( FIRE) for having supported this academic research study and for having promoted these student exchangesthe German Research Foundation (DFG) +1 种基金supported in the framework of the priority program 1418 "Refractory - Initiative to Reduce Emissions"ALTEO,KERl NEOS,DAMREC,REFEL and BASF for supporting this work with raw materials
文摘Refractory materials are subjected to mechanical and chemical loads during application,which respectively lead to fracture and corrosion. The understanding of the mechanical fracture and the microstructural modification after progressive thermal shocks is necessary for the suitable design of high performance refractory materials.The fracture process zone can be divided into two areas,where different toughening mechanisms are likely to take place： the crack tip and the following process region called wake region. In this study,the emphasis is laid on the microstructural mechanisms occurring in the wake region of the crack and the crack tip. Therefore,functional aggregates,namely fused eutectic aggregates of Al2O3- ZrO 2- SiO 2and Al2O3- ZrO 2,and andalusite,are added to a model high alumina castable formulation based on tabular alumina. The discrepancy in thermal behavior between aggregates and matrix as well as phase transformation such as mullite formation favor further the nucleation of microcracks that reduce the stress field at the level of the crack tip. Two different grain fractions of tabular alumina（ 0. 2- 0. 6 mm or2. 24- 3. 00 mm） are substituted by these functional aggregates. After sintering at 1 500 ℃ for 6 h,the samplesare quenched up to 10 times in air without pressure from950 ℃ to room temperature. The resulting elastic properties are examined after each thermal shock cycle,as well as the residual bending strength after 0,1,3,5,7and 10 thermal shocks. These results are correlated with Scanning Electron Microscopy analyses after the different thermal shock cycles.
文摘A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.
基金This work was supported by the National Nature Science Foundation of China.
文摘The thermal and thermo-elastic-plastic response of newly developed ceramic-metal functionally graded materials under a thermal shock load is studied. The materials are heated at the ceramic surface with a sudden high-intensity heat flux input, and cooled at the metal surface with a flowing liquid nitrogen. Emphasis is placed on two aspects: (1) the influence of the graded composition of the materials on the temperature and stress response; and (2) the optimum design of the graded composition from a unified viewpoint of the heat insulation property and stress relaxation property. Moreover, a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is also made to indicate the plasticity effect.
基金supported by the National Natural Science Foundation of China(Grants 11472313,11232015,and 11572355)the Guangdong Province Research Fund for Applied Research
文摘Conventional heat transfer fluids usually have low thermal conductivity, limiting their efficiency in many applications. Many experiments have shown that adding nanosize solid particles to conventional fluids can greatly enhance their thermal conductivity. To explain this anomalous phenomenon, many theoretical investigations have been conducted in recent years. Some of this research has indicated that the particle agglomeration effect that commonly occurs in nanofluids should play an important role in such enhancement of the thermal conductivity, while some have shown that the enhancement of the effective thermal conductivity might be accounted for by the structure of nanofluids, which can be described using the radial distribution function of particles. However, theoretical predictions from these studies are not in very good agreement with experimental results. This paper proposes a prediction model for the effective thermal conductivity of nanofluids, considering both the agglomeration effect and the radial distribution function of nanoparticles. The resulting theoretical predictions for several sets of nanofluids are highly consistent with experimental data.
基金Project supported by the National Natural Science Foundation of China (No.50575180)the Natural Science Foundation of Shaanxi Province of China (No.2005A18)
文摘The non-linear governing differential equations of immovably simply supported flanctionally graded material （FGM） rod subjected to thermal loads were derived. The thermal post-buckling behaviors of FGM rod made of ZrO2 and Ti-6Al-4Vwere anaiyzed by shooting method. Firstly, the thermal post-buckling equilibrium paths of the FGM rod with different gradient index in the uniform temperature field were plotted, and compared with the behaviors of the homogeneous rods made of ZrO2 and Ti-6Al-4V materials, respectively. For given value of end rotation angles, the influence of gradient index on the thermal post-buckling behaviors of FGM rod was discussed. Secondly, the thermal post-buckling characteristics of the FGM rod were analyzed when the temper- ature difference parameter is changed while the bottom temperature parameter remains constant, and when the bottom temperature parameter is changed while the temperature difference parameter remains constant, and compared with the characteristics of the two homogeneous material rods.
文摘A possible way to increase thermal conductivity of working fluids, while keeping pressure drop at acceptable levels, is through nanofluids. Nanofluids are nano-sized particles dispersed in conventional working fluids. A great number of materials have potential to be used in nanoparticles production and then in nanofluids;one of them is Multi-Walled Carbon Nano Tubes (MWCNT). They have thermal conductivity around 3000 W/mK while other materials used as nanoparticles like CuO have thermal conductivity of 76.5 W/mK. Due to this fact, MWCNT nanoparticles have potential to be used in nanofluids production, aiming to increase heat transfer rate in energy systems. In this context, the main goal of this paper is to evaluate from the synthesis to the experimental measurement of thermal conductivity of nanofluid samples based on functionalized (-OH) MWCNT nanoparticles. They will be analyzed nanoparticles with different functionalization degrees (4% wt, 6% wt, and 9% wt). In addition, it will be quantified other thermophysical properties (dynamic viscosity, specific heat and specific mass) of the synthetized nanofluids. So, the present work can contribute with experimental data that will help researches in the study and development of MWCNT nanofluids. According to the results, the maximum increment obtained in thermal conductivity was 10.65% in relation to the base fluid (water).
文摘This work examines the fracture behavior of a functionally graded material （FGM） plate containing parallel surface cracks with alternating lengths subjected to a thermal shock. The thermal stress intensity factors （TSIFs） at the tips of long and short cracks are calculated using a singular integral equation technique. The critical thermal shock △Tc that causes crack initiation is calculated using a stress intensity factor criterion. Numerical examples of TSIFs and △Tc for an Al2O3/Si3N4 FGM plate are presented to illustrate the effects of thermal property gradation, crack spacing and crack length ratio on the TSIFs and △Tc. It is found that for a given crack length ratio, the TSIFs at the tips of both long and short cracks can be reduced significantly and △Tc can be enhanced by introducing appropriate material gradation. The TSIFs also decrease dramatically with a decrease in crack spacing. The TSIF at the tips of short cracks may be higher than that for the long cracks under certain crack geometry conditions. Hence, the short cracks instead of long cracks may first start to grow under the thermal shock loading.
基金Funded by he National Natural Science Foundation of China(51402097)the Open Foundation of Hubei Provincial Key Laboratory of Green Materials for Light Industry(201806A04)the College Students Innovation and Entrepreneurship Training Program of Hubei University of Technology(201810500151)
文摘Cu/Ti3AlC2 composite and functional-gradient materials with excellent electrical conductivity and thermal conductivity as well as good flexural properties were prepared by low-temperature spark plasma sintering of Cu and Ti3AlC2 powder mixtures. The phase compositions of the materials were analyzed by X-ray diffraction, and their microstructure was characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. Further, the electrical conductivity, thermal conductivity, and flexural properties of the materials were tested. Results show that, for the composite materials, the resistivity rises from 0.75 × 10^-7 Ω·m only to 1.32 × 10^-7 Ω·m and the thermal diffusivity reduces from 82.5 mm^2/s simply to 39.8 mm^2/s, while the flexural strength improves from 412.9 MPa to 471.3 MPa, as the content of Ti3AlC2 is increased from 5 wt%to 25 wt%. Additionally, the functional-gradient materials sintered without interface between the layers exhibit good designability, and their overall electrical conductivity, thermal conductivity, and flexural strength are all higher than those of the corresponding uniform composite material.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10775097 and 10874174)the Research Foundation of the Education Department of Jiangxi Province of China
文摘By using the technique of integration within an ordered product of operators, the normal ordered density operator of the photon-subtracted squeezed thermal state （PSSTS） is derived. Then the corresponding Wigner function is presented by using the coherent state representation of the Wigner operator. The nonclassical properties of the PSSTS are discussed based on the negativity of the Wigner function.
文摘Based on the thermal stress distribution for functionally gradient material (FGM) plates, a Genetic Algorithm (GA) method for the thermal stresses optimum design of FGM plate with computer technologies is given. The minimum thermal stresses combination distribution for FGM is obtained.
基金This work was supported by the National Basic Research Program of China(No.2005CB623703)National Natural Science Foundation(No.5047405I)+1 种基金Hunan Provincial Natural Science Foundation of China(No.03JJY3080)Trans-Century Excellent Persons Cultivation Project of Ministry of Education of China(in 2002).
文摘The thermal stresses relaxation of Ni/NiFe2O4 system functionally graded cermet inert anode for aluminum electrolysis was optimally designed. The transient thermal stresses of the inert anode under complex boundary condition during high-temp （955℃） electrolysis were calculated using the finite-element software ANSYS, the influence of different parameters on the distribution of the thermal stresses were analyzed. The results showed that, during the process of thermal shock, the thermal hoop tensile stress on the surface of the anode is very large, which is possibly the major cause of anode crack; when the radius of the anode is between 0.05-0.15m, a range that can be realized by recent manufacturing technology, the optimum composition distribution exponent p is 0.25; The hoop tensile stresses reduce with the decrease of anode scale and also decrease with the decrease of the convection coefficient between the electrolyte and the anode.
文摘In this paper, the composite cylinder system is made of three layers: metal, functionally gradient material (FGM) and ceramics is studied. The formulas of the steady_state temperature distribution and the associate thermal stress distribution in the cylinder are obtained. For ZrO 2/Ti_6Al_4V system, the distribution of steady_state temperature and thermal stress are calculated and discussed.
基金Project supported by the National Natural Science Foundation of China (No.10472039)
文摘Analysis of thermal post-buckling of FGM （Functionally Graded Material） Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transverse shear deformation in the sense of theory of Timoshenko beam, geometrical nonlinear governing equations including seven basic unknown functions for functionally graded beams subjected to mechanical and thermal loads were formulated. In the analysis, it was assumed that the material properties of the beam vary continuously as a power function of the thickness coordinate. By using a shooting method, the obtained nonlinear boundary value problem was numerically solved and thermal buckling and post-buckling response of transversely nonuniformly heated FGM Timoshenko beams with fixed-fixed edges were obtained. Characteristic curves of the buckling deformation of the beam varying with thermal load and the power law index are plotted. The effects of material gradient property on the buckling deformation and critical temperature of beam were discussed in details. The results show that there exists the tension-bend coupling deformation in the uniformly heated beam because of the transversely non-uniform characteristic of materials.
