Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed...Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.展开更多
Based on the density functional theory, the influences of strain on structural, elastic, thermal and optical properties of CuGaTe2 are discussed in detail. It is found that the tensile strain on CuGaTe2 is beneficial ...Based on the density functional theory, the influences of strain on structural, elastic, thermal and optical properties of CuGaTe2 are discussed in detail. It is found that the tensile strain on CuGaTe2 is beneficial to the decrease of lattice thermal conductivity by reducing the mean sound velocity and Debye temperature. Moreover, all strained and unstrained CuGaTe2 exhibit rather similar optical characters. But the tensile strain improves the ability to absorb sunlight in the visible range.These research findings can give hints for designing thermoelectric and photovoltaic devices.展开更多
A high-degree (degree l = 6 and order m = 0, 1, 2, [midline ellipsis] , l. High-order model for short) and steady thermal free convective motion of an infinite Prandtl number and Boussinesq fluid in a spherical shell ...A high-degree (degree l = 6 and order m = 0, 1, 2, [midline ellipsis] , l. High-order model for short) and steady thermal free convective motion of an infinite Prandtl number and Boussinesq fluid in a spherical shell is calculated by a Galerkin method. Convection is driven by an imposed temperature drop across top rigid and bottom stress-free isothermal boundaries only heated from below of the shell. In this paper, the scalar poloidal and fluctuating temperature fields are expanded into associated Legendre polynomials with degree l = 6 and order m = 0, 1, 2, [midline ellipsis] , l. Compared with zero-order model (degree l = 6 and order m = 0), from which 2-D longitudinal (r-θ) profiles can be obtained, high-order model can provide a series of southerly (r-θ), easterly (r-φ) and radial (θ-φ) velocity profiles, which probably reveal more detail features of mass motion in the mantle. It is found that Rayleigh number has great effects on the patterns and velocities of thermal free convection and controls the relative ratio of hot and cold plume in the shell. Probably, the present results mainly reveal the mass motion in the lower mantle, while the striking differences of convection patterns from velocities at different positions have important geodynamical significances.展开更多
We improved the thermal equivalent-circuit model of the laser diode module（LDM） to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal p...We improved the thermal equivalent-circuit model of the laser diode module（LDM） to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal parameters and the transient junction temperature of the LDM are modeled and obtained according to the temperature of the thermistor integrated in the module.Our improved thermal model is verified indirectly by monitoring the emission wavelength of the laser diode against gas absorption lines,and several thermal parameters are obtained with the temperature uncertainty of 0.01 K in the thermal dynamic process.展开更多
Ceramic and polytetrafluoroethylene composites as dielectric materials have a low dielectric loss at high frequency and play an important role in the modern communication field.However,room temperature phase transform...Ceramic and polytetrafluoroethylene composites as dielectric materials have a low dielectric loss at high frequency and play an important role in the modern communication field.However,room temperature phase transformation of PTFE resins,which is accompanied by a large volume change(>400 ppm/℃),seriously affects the dimensional stability and performance stability of materials.The LD125 modified glass fiber(GF)was introduced to the CaO-Li2 O-Sm2O3-TiO2(CLST)/PTFE composite,to reduce the thermal expansion coefficient(CTE)of the composites.The tri-phase composites(CLST/PTFE/GF)show the low dielectric loss and excellent machine-ability.The effect of GF content on the dielectric properties and CTE was also investigated.The CLST/PTFE filled with 5%GF exhibits the best overall performance,which is a promising microwave dielectric material for microwave communication.展开更多
The high temperature gas occurs behind shock or near the wall surface of vehicle in the hypersonic flight. As the temperature exceeds 2 000 K, 4 000 K, respectively, O2 and N2 molecules are successively dissociated. B...The high temperature gas occurs behind shock or near the wall surface of vehicle in the hypersonic flight. As the temperature exceeds 2 000 K, 4 000 K, respectively, O2 and N2 molecules are successively dissociated. Because of variable components at dif- ferent temperatures and pressures, the dissociated air is no longer a perfect gas, In this paper, a new method is developed to calculate accurate thermal physical parameters with the dissociation degree providing the thermochemical equilibrium procedure. Based on the dissociation degree, it is concluded that few numbers of equations and the solutions are easily obtained. In addition, a set of formulas relating the parameter to the dissociation degree are set up four-species, O2 molecule The thermodynamic properties of dissociated air containing and N2 molecule, O atom and N atom, are studied with the new method, and the results are consistent with those with the traditional equilibrium constant method. It is shown that this method is reliable for solving thermal physical parameters easily and directly.展开更多
Coal fly ash is being utilized as a recycling material for catalysis due to its aluminosilicate content. Catalytic conversion of polymeric wastes into synthetic gasoline and diesel through pyrolysis requires applicati...Coal fly ash is being utilized as a recycling material for catalysis due to its aluminosilicate content. Catalytic conversion of polymeric wastes into synthetic gasoline and diesel through pyrolysis requires application of kinetic and thermodynamic principles. This study aimed to identify the catalytic rate constant necessary for rate law involved in reaction mechanisms and activation energy reduction needed for heat transfer rate. Stoichiometric application for balanced total series of elementary reactions is solved for the concentration determination of reactants and products. Unsteady-state in three dimensional directions of thermodynamics is derived for the determination of heat transfer rate, temperatures at any position in a sphere using Gurney and Lurie chart and center temperature in a sphere by Heisler chart. Application principles of rate law and Arrhenius equation can result to thermal conductivity as a function of activation energy leading to synthetic fuel production.展开更多
The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mas...The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mass density is the main cause for the occurrence of non-homogeneity in plate’s material. In this consideration, density varies linearly in one direction. The governing differential equations have been derived by Rayleigh-Ritz method in order to attain fundamental frequencies. With C-S-C-S boundary condition, a two term deflection function has been considered. The effect of structural parameters such as taper constants, thermal gradient, aspect ratio and non-homogeneity constant has been investigated for first two modes of vibration. The obtained numerical results have been presented in tabular and graphical form.展开更多
The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear alon...The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear along the length of the plate. Non-homogeneity in plate arises due to variation in density along the length of the plate. The two-term deflection function with clamped-simply supported-clamped-simply supported boundary condition is taken into consideration. The effect of structural parameters such as taper constants, thermal gradient, non-homogeneity constant and aspect ratio has been studied. Rayleigh-Ritz method is used to solve the governing differential equations and to obtain the fundamental frequencies for the first two modes of vibration. Results are presented in graphical form.展开更多
The purity of the brazing alloys applied is necessary to be improved with the increasing cleanness of steel. Calcium is easily brought into the widely ased brazing alloy, Ag-Cu-Zn, during the producing process. This p...The purity of the brazing alloys applied is necessary to be improved with the increasing cleanness of steel. Calcium is easily brought into the widely ased brazing alloy, Ag-Cu-Zn, during the producing process. This paper aims at revealing the effect of calcium on the melting behavior of the brazing alloy. The thermal analysis kinetics of silver alloy with trace calcium was studied by using differential scanning calorimetry （ DSC ） , and the enthalpy peaks were analyzed by differential methods. The rate constant of phase transformation in the probable brazing temperature range goes up with increasing calcium content, according to the values of the apparent activation energy, E, and the frequeney constant, A. It is concluded that the calcium addition could improve the melting performance of Ag-Cu-Zn brazing alloy.展开更多
我国锅炉性能试验标准中普遍没有提供SO_(2)和NO平均比定压热容的计算方法,本文基于《API技术数据手册》和沈维道《工程热力学》(第4版)的SO_(2)瞬时比定压热容计算方法,分别给出了使用积分方法和算术平均值方法SO_(2)平均比定压热容计...我国锅炉性能试验标准中普遍没有提供SO_(2)和NO平均比定压热容的计算方法,本文基于《API技术数据手册》和沈维道《工程热力学》(第4版)的SO_(2)瞬时比定压热容计算方法,分别给出了使用积分方法和算术平均值方法SO_(2)平均比定压热容计算方法,通过计算发现2种方法的差距很小,如果是工程应用2种方法都可以选取;基于Fundamentals of Thermodynamics(第10版)的NO瞬时比定压热容计算方法,提出了使用积分方法的NO平均比定压热容计算方法,解决了我国锅炉性能试验标准中SO_(2)和NO平均比定压热容缺少计算方法的问题。展开更多
文摘Three-dimensional thermal a nalysis simulation of a horizontal zone refining system is conducted for germanimn semiconductor materials. The considered geometry includes a g＇ral）hite boat filled with germanium placed in a cylindrical quartz tube. A flow of Ar and H2 gas mixture is purged througll the tube. A narrow section of the, boat is assmned to be exposed to a constant heat rate produced b v an rf coil located outside the quartz tube. The results of this analysis provide essential information about various parameters such as the shape of tile molten zone, required power and temperature gradient in the system.
基金supported by the National Natural Science Foundation of China(Grant No.11304105)
文摘Based on the density functional theory, the influences of strain on structural, elastic, thermal and optical properties of CuGaTe2 are discussed in detail. It is found that the tensile strain on CuGaTe2 is beneficial to the decrease of lattice thermal conductivity by reducing the mean sound velocity and Debye temperature. Moreover, all strained and unstrained CuGaTe2 exhibit rather similar optical characters. But the tensile strain improves the ability to absorb sunlight in the visible range.These research findings can give hints for designing thermoelectric and photovoltaic devices.
基金National Natural Science Foundation of China (49834020).
文摘A high-degree (degree l = 6 and order m = 0, 1, 2, [midline ellipsis] , l. High-order model for short) and steady thermal free convective motion of an infinite Prandtl number and Boussinesq fluid in a spherical shell is calculated by a Galerkin method. Convection is driven by an imposed temperature drop across top rigid and bottom stress-free isothermal boundaries only heated from below of the shell. In this paper, the scalar poloidal and fluctuating temperature fields are expanded into associated Legendre polynomials with degree l = 6 and order m = 0, 1, 2, [midline ellipsis] , l. Compared with zero-order model (degree l = 6 and order m = 0), from which 2-D longitudinal (r-θ) profiles can be obtained, high-order model can provide a series of southerly (r-θ), easterly (r-φ) and radial (θ-φ) velocity profiles, which probably reveal more detail features of mass motion in the mantle. It is found that Rayleigh number has great effects on the patterns and velocities of thermal free convection and controls the relative ratio of hot and cold plume in the shell. Probably, the present results mainly reveal the mass motion in the lower mantle, while the striking differences of convection patterns from velocities at different positions have important geodynamical significances.
基金Project supported by the Key Program of the National Natural Science Foundation of China (Grant No. 60938002)the Special-funded Program on National Key Scientific Instruments and Equipment Development of China (Grant No. 2012YQ06016501)the Tianjin Research Program of Application Foundation and Advanced Technology,China (Grant No. 11JCYBJC04900)
文摘We improved the thermal equivalent-circuit model of the laser diode module（LDM） to evaluate its thermal dynamic properties and calculate the junction temperature of the laser diode with a high accuracy.The thermal parameters and the transient junction temperature of the LDM are modeled and obtained according to the temperature of the thermistor integrated in the module.Our improved thermal model is verified indirectly by monitoring the emission wavelength of the laser diode against gas absorption lines,and several thermal parameters are obtained with the temperature uncertainty of 0.01 K in the thermal dynamic process.
基金supported by the National Natural Science Foundation of China(No.51572205)the Equipment Pre-Research Joint Fund of EDD and MOE(No.6141A02033209)+1 种基金the Fundamental Research Funds for the Central Universities(WUT:Nos.2017III035,2018III019)the Natural Science Foundation of Hubei Province,China(No.2014CFB854)
文摘Ceramic and polytetrafluoroethylene composites as dielectric materials have a low dielectric loss at high frequency and play an important role in the modern communication field.However,room temperature phase transformation of PTFE resins,which is accompanied by a large volume change(>400 ppm/℃),seriously affects the dimensional stability and performance stability of materials.The LD125 modified glass fiber(GF)was introduced to the CaO-Li2 O-Sm2O3-TiO2(CLST)/PTFE composite,to reduce the thermal expansion coefficient(CTE)of the composites.The tri-phase composites(CLST/PTFE/GF)show the low dielectric loss and excellent machine-ability.The effect of GF content on the dielectric properties and CTE was also investigated.The CLST/PTFE filled with 5%GF exhibits the best overall performance,which is a promising microwave dielectric material for microwave communication.
基金supported by the National Natural Science Foundation of China(Nos.11732011,11672205,and 11332007)the National Key Research and Development Program of China(No.2016YFA0401200)
文摘The high temperature gas occurs behind shock or near the wall surface of vehicle in the hypersonic flight. As the temperature exceeds 2 000 K, 4 000 K, respectively, O2 and N2 molecules are successively dissociated. Because of variable components at dif- ferent temperatures and pressures, the dissociated air is no longer a perfect gas, In this paper, a new method is developed to calculate accurate thermal physical parameters with the dissociation degree providing the thermochemical equilibrium procedure. Based on the dissociation degree, it is concluded that few numbers of equations and the solutions are easily obtained. In addition, a set of formulas relating the parameter to the dissociation degree are set up four-species, O2 molecule The thermodynamic properties of dissociated air containing and N2 molecule, O atom and N atom, are studied with the new method, and the results are consistent with those with the traditional equilibrium constant method. It is shown that this method is reliable for solving thermal physical parameters easily and directly.
文摘Coal fly ash is being utilized as a recycling material for catalysis due to its aluminosilicate content. Catalytic conversion of polymeric wastes into synthetic gasoline and diesel through pyrolysis requires application of kinetic and thermodynamic principles. This study aimed to identify the catalytic rate constant necessary for rate law involved in reaction mechanisms and activation energy reduction needed for heat transfer rate. Stoichiometric application for balanced total series of elementary reactions is solved for the concentration determination of reactants and products. Unsteady-state in three dimensional directions of thermodynamics is derived for the determination of heat transfer rate, temperatures at any position in a sphere using Gurney and Lurie chart and center temperature in a sphere by Heisler chart. Application principles of rate law and Arrhenius equation can result to thermal conductivity as a function of activation energy leading to synthetic fuel production.
文摘The present analysis demonstrates the thermal effect on vibrations of a symmetric, non-homoge- neous trapezoidal plate with parabolically varying thickness in both directions. The variation in Young’s modulus and mass density is the main cause for the occurrence of non-homogeneity in plate’s material. In this consideration, density varies linearly in one direction. The governing differential equations have been derived by Rayleigh-Ritz method in order to attain fundamental frequencies. With C-S-C-S boundary condition, a two term deflection function has been considered. The effect of structural parameters such as taper constants, thermal gradient, aspect ratio and non-homogeneity constant has been investigated for first two modes of vibration. The obtained numerical results have been presented in tabular and graphical form.
文摘The main aim of the present work is to study the linear temperature behaviour of a non-homogeneous trapezoidal plate whose thickness varies linearly in both directions. The temperature behaviour considered linear along the length of the plate. Non-homogeneity in plate arises due to variation in density along the length of the plate. The two-term deflection function with clamped-simply supported-clamped-simply supported boundary condition is taken into consideration. The effect of structural parameters such as taper constants, thermal gradient, non-homogeneity constant and aspect ratio has been studied. Rayleigh-Ritz method is used to solve the governing differential equations and to obtain the fundamental frequencies for the first two modes of vibration. Results are presented in graphical form.
文摘The purity of the brazing alloys applied is necessary to be improved with the increasing cleanness of steel. Calcium is easily brought into the widely ased brazing alloy, Ag-Cu-Zn, during the producing process. This paper aims at revealing the effect of calcium on the melting behavior of the brazing alloy. The thermal analysis kinetics of silver alloy with trace calcium was studied by using differential scanning calorimetry （ DSC ） , and the enthalpy peaks were analyzed by differential methods. The rate constant of phase transformation in the probable brazing temperature range goes up with increasing calcium content, according to the values of the apparent activation energy, E, and the frequeney constant, A. It is concluded that the calcium addition could improve the melting performance of Ag-Cu-Zn brazing alloy.
文摘我国锅炉性能试验标准中普遍没有提供SO_(2)和NO平均比定压热容的计算方法,本文基于《API技术数据手册》和沈维道《工程热力学》(第4版)的SO_(2)瞬时比定压热容计算方法,分别给出了使用积分方法和算术平均值方法SO_(2)平均比定压热容计算方法,通过计算发现2种方法的差距很小,如果是工程应用2种方法都可以选取;基于Fundamentals of Thermodynamics(第10版)的NO瞬时比定压热容计算方法,提出了使用积分方法的NO平均比定压热容计算方法,解决了我国锅炉性能试验标准中SO_(2)和NO平均比定压热容缺少计算方法的问题。
