Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'...Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.展开更多
In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A ...In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.展开更多
As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operatio...As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operation.The free-standing cold-water pipe(CWP)in the system withstands various complex loads during operation,posing potential failure risks.To reveal the deformation and stress mechanisms of OTEC CWPs,this study first analyzes wave particle velocity and acceleration to determine wave loads at different water depths.Based on the Euler-Bernoulli beam model,a quasi-static load calculation model for OTEC CWPs was established.The governing equations were discretized using the finite difference method,and matrix equations were solved to analyze bending deformation,bending moments,and surface stresses at discrete points along the pipe.Results indicate that water depths within 50 m represent a critical zone where wave particle velocity,acceleration,and wave loads exhibit significant variations in harmonic patterns,while beyond 50 m depth wave loads decrease linearly.Ocean currents and surface wind-driven currents substantially influence the CWP’s lateral displacement.Considering the effect of clump weights,the maximum lateral displacement occurs at 600–800 m below sea level.Utilizing large-wall-thickness high-strength pipes at the top section significantly enhances the structural safety of the CWP system.展开更多
There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reac...There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.展开更多
The increasing demand due to development and advancement in every field of life has caused the depletion of fossil fuels.This depleting fossil fuel reserve throughout the world has enforced to get energy from alternat...The increasing demand due to development and advancement in every field of life has caused the depletion of fossil fuels.This depleting fossil fuel reserve throughout the world has enforced to get energy from alternative/renewable sources.One of the economicalways to get energy is through the utilization of solar ponds.In this study,a mathematical model of a salt gradient solar pond under the Islamabad climatic conditions has been analyzed for the first time.The model uses a one-dimensional finite difference explicit method for optimization of different zone thicknesses.The model depicts that NCZ(Non-Convective Zone)thickness has a significant effect on LCZ(Lower Convective Zone)temperature and should be kept less than 1.7mfor the optimal temperature.It is also observed that for long-termoperation of a solar pond,heat should be extracted by keeping the mass flowrate of 17.3 kg/m^(2)/day.Themodel also suggests that when the bottom reflectivity is about 0.3,then only 24%of the radiation is absorbed in the pond.展开更多
The efficiency of energy conversion from mechanical to electrical in AC generators is not entirely optimal,as power losses are converted into heat.Accurate thermal modeling and temperature measurement of advanced elec...The efficiency of energy conversion from mechanical to electrical in AC generators is not entirely optimal,as power losses are converted into heat.Accurate thermal modeling and temperature measurement of advanced electric machines with complex structures are mandatory to confirm their reliability and safe operation.In a unique axial transverse flux switching permanent magnet(ATFSPM)generator,due to its high power density,large stray loss from leakage flux,compact topology,and totally enclosed structure,thermal analysis is of paramount significance.In this paper,thermal modeling and analysis of ATFSPM are carried out in detail using a three-dimensional(3D)finite element analysis(FEA)to evaluate the thermal condition for a precise performance improvement.To begin,all loss sources are accurately derived using 3-D FEA and analytical methods,taking into account the temperature dependence of material properties,and then losses are coupled to the thermal model as heat sources.Afterward,aiming for realistic thermal modelling,the convection heat transfer in the different regions of internal and external areas as well as thin layers of interface gaps between components are all considered.In addition,the prototype of ATFSPM is supplied to validate the accuracy of 3-D FEA temperature prediction.Furthermore,a novel technique is carried out to effectively improve thermal performance,enhance the efficiency,and limit hot-spot temperatures.The steady-state and transient temperature results demonstrate the high accuracy of the thermal modeling,enhance the secure operation of the ATFSPM,and facilitate increased loading utilizing the proposed technique.(1)展开更多
The future large-scale application of sodium-ion batteries(SIBs)is inseparable from their excellent electrochemical performance and reliable safety characteristics.At present,there are few studies focusing on their sa...The future large-scale application of sodium-ion batteries(SIBs)is inseparable from their excellent electrochemical performance and reliable safety characteristics.At present,there are few studies focusing on their safety performance.The analysis of thermal stability and structural changes within a single material cannot systematically describe the complex interplay of components within the battery system during the thermal runaway process.Furthermore,the reaction between the battery materials themselves and their counterparts within the system can stimulate more intense exothermic behavior,thereby affecting the safety of the entire battery system.Therefore,this study delved into the thermal generation and gas evolution characteristics of the positive electrode(Na_(x)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2),NFM111)and the negative electrode(hard carbon,HC)in SIBs,utilizing various material combinations.Through the integration of microscopic and macroscopic characterization techniques,the underlying reaction mechanisms of the positive and negative electrode materials within the battery during the heating process were elucidated.Three important results are derived from this study:(Ⅰ)The instability of the solid electrolyte interphase(SEI)leads to its decomposition at temperatures below 100℃,followed by extensive decomposition within the range of 100-150℃,yielding heat and the formation of inorganic compounds,such as Na_(2)CO_(3)and Na_(2)O;(Ⅱ)The reaction between NFM111 and the electrolyte constitutes the primary exothermic event during thermal abuse,with a discernible reaction also occurring between sodium metal and the electrolyte throughout the heating process;(Ⅲ)The heat production and gas generation behaviors of multi-component reactions do not exhibit complete correlation,and the occurrence of gas production does not necessarily coincide with thermal behavior.The results presented in this study can provide useful guidance for the safety improvement of SIBs.展开更多
The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the ...The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.展开更多
With the acceleration of intelligent transformation of energy system,the monitoring of equipment operation status and optimization of production process in thermal power plants face the challenge of multi-source heter...With the acceleration of intelligent transformation of energy system,the monitoring of equipment operation status and optimization of production process in thermal power plants face the challenge of multi-source heterogeneous data integration.In view of the heterogeneous characteristics of physical sensor data,including temperature,vibration and pressure that generated by boilers,steam turbines and other key equipment and real-time working condition data of SCADA system,this paper proposes a multi-source heterogeneous data fusion and analysis platform for thermal power plants based on edge computing and deep learning.By constructing a multi-level fusion architecture,the platform adopts dynamic weight allocation strategy and 5D digital twin model to realize the collaborative analysis of physical sensor data,simulation calculation results and expert knowledge.The data fusion module combines Kalman filter,wavelet transform and Bayesian estimation method to solve the problem of data time series alignment and dimension difference.Simulation results show that the data fusion accuracy can be improved to more than 98%,and the calculation delay can be controlled within 500 ms.The data analysis module integrates Dymola simulation model and AERMOD pollutant diffusion model,supports the cascade analysis of boiler combustion efficiency prediction and flue gas emission monitoring,system response time is less than 2 seconds,and data consistency verification accuracy reaches 99.5%.展开更多
High-concentration photovoltaic(HCPV)systems present significant thermal management challenges due to the intense heat fluxes generated under concentrated solar irradiation,especially in arid environments.Effective he...High-concentration photovoltaic(HCPV)systems present significant thermal management challenges due to the intense heat fluxes generated under concentrated solar irradiation,especially in arid environments.Effective heat dissipation is critical to prevent performance degradation and structural failure.This study investigates the thermal performance and design optimization of an enhanced HCPV module,integrating numerical,analytical,and experimental methods.A coupled optical-thermal-electrical model was developed to simulate ray tracing,heat transfer,and temperature-dependent electrical behaviour,with predictions validated under real-world desert conditions.Compared to a baseline commercial module operating at 106℃,the optimized design achieved a peak temperature reduction of 16℃,lowering the cell temperature to 90℃under a concentration ratio of 961×and direct normal irradiance(DNI)of 950 W/m^(2).The total thermal resistance was reduced from 0.25 to 0.15 K/W(a 40%improvement),and the electrical efficiency increased from 37.5%to 38.6%,representing a relative gain of approximately 3.1%.The system consistently maintained a fill factor exceeding 78%,underscoring stable performance under high thermal load.These findings demonstrate that targeted thermal design,informed by integrated modeling,is essential for unlocking the reliability and efficiency of high-flux solar energy systems.展开更多
The copper complexing of dissolved organic matter released from hydrochar(HDOM)affects the former’s environmental behavior.In this study,how hydrothermal temperatures(180,220 and 260℃)influence the molecular-level c...The copper complexing of dissolved organic matter released from hydrochar(HDOM)affects the former’s environmental behavior.In this study,how hydrothermal temperatures(180,220 and 260℃)influence the molecular-level constitutions and Cu(II)binding features of HDOM were elucidated via fourier transform ion cyclotron resonance mass spectrometry and multi-spectroscopic analysis.The findings demonstrated that the almost HDOM molecules had the traits of lower polarity and higher hydrophobicity.As the hydrothermal temperature increased,the molecules with particularly high relative strength gradually disappeared,average molecular weight,percentages of CHON and aliphatic compounds of HDOM reduced while the percentages of CHO and aromatic compounds increased.In general,the fluorescence quenching of Cu(II)weakened as hydrothermal temperature rose and the Cu(II)binding stability constants of fluorophores in HDOM were 4.50–5.31.In addition,the Cu(II) binding order of fluorophores in HDOM showed temperature heterogeneities, andpolysaccharides or aromatic rings of non-fluorescent substances had the fastest responsesto Cu(II) binding. Generally, fluorescent components tend to bind Cu(II) at relatively traceconcentrations (0–40 μmol/L), whereas non-fluorescent substances tend to the bind Cu(II)at relatively higher concentrations (50–100 μmol/L). This study contributed to the predictionof the potential environmental behaviors and risks of Cu(II) at the molecular level afterhydrochar application.展开更多
This study explores the magnetohydrodynamic(MHD)boundary layer flow of a water-based Boger nanofluid over a stretching sheet,with particular focus on the influences of nanoparticle diameter,nanolayer effects,and therm...This study explores the magnetohydrodynamic(MHD)boundary layer flow of a water-based Boger nanofluid over a stretching sheet,with particular focus on the influences of nanoparticle diameter,nanolayer effects,and thermal radiation.The primary aim is to examine how variations in nanoparticle size and nanolayer thickness affect the hydrothermal behavior of the nanofluid.The model also incorporates the contributions of viscous dissipation and Joule heating within the heat transfer equation.The governing momentum and energy equations are converted into dimensionless partial differential equations(PDEs)using appropriate similarity variables and are numerically solved using the finite element method(FEM)implemented in MATLAB.Extensive validation of this method confirms its reliability and accuracy in numerical solutions.The findings reveal that increasing the diameter of copper nanoparticles significantly enhances the velocity profile,with a more pronounced effect observed at wider inter-particle spacings.A higher solvent volume fraction leads to decreased velocity and temperature distributions,while a greater relaxation time ratio improves velocity and temperature profiles due to the increased elastic response of the fluid.Moreover,enhancements in the magnetic parameter,thermal radiation,and Eckert number lead to an elevation in temperature profiles.Furthermore,higher nanolayer thickness reduces the temperature profile,whereas particle radius yields the opposite outcome.展开更多
This work quantifies the thermal performance of natural composite blocks made from Yapatera diatomaceous earth reinforced with sugarcane bagasse fibres.Prismatic specimens(185×185 mm)with three thicknesses(≈76 m...This work quantifies the thermal performance of natural composite blocks made from Yapatera diatomaceous earth reinforced with sugarcane bagasse fibres.Prismatic specimens(185×185 mm)with three thicknesses(≈76 mm,100 mm,and 150 mm)and bagasse contents of 5–15%(wt.)were tested at hot-face temperatures of 100,250,and 450℃in a full-factorial 3×3×3 plan(54 tests).Thermal conductivity(k)was measured using a guarded hot-plate device aligned with ASTM D5470/E1530/C177.The measured k averaged 0.125 W/m·K(range~0.088–0.220 W/m·K)and remained stable in function up to 500℃.ANOVA showed that temperature and thickness significantly increased k(p<0.05),while fibre content had a weaker,non-monotonic effect beyond~10%.A response-surface model(RSM)provided accurate predictions(R^(2)≈0.95).For design purposes,thermal resistance was computed as R=Δx/k.A 150 mm block yielded R≈1.20 m^(2)K/W,comparable to~0.40 m of hollow ceramic brick and>1.0 m of concrete to reach a similar R.The composite therefore occupies a distinct niche:medium-performance insulation with high-temperature stability(≤500℃),low embodied energy(air-dried manufacturing,agro-waste feedstock),and competitive cost potential.These results support its use in industrial and building applications where conventional insulators are unsustainable or operate below the required temperature window.展开更多
For thermal power enterprises,the traditional business model of scale expansion and a single product line restricts the development of electricity marketing.Therefore,to achieve the transformation and upgrading of the...For thermal power enterprises,the traditional business model of scale expansion and a single product line restricts the development of electricity marketing.Therefore,to achieve the transformation and upgrading of their electricity marketing,this study starts from the current situation of the electricity market and introduces in detail the market-oriented electricity marketing strategies of thermal power enterprises from four aspects:product strategy,price strategy,channel strategy,and promotion strategy.The analysis finds that a market-oriented electricity marketing strategy is not only an inevitable choice for thermal power enterprises to respond to current challenges but also an essential path for them to move toward high-quality development.Through continuous innovation and upgrading,thermal power enterprises will maintain a leading position in fierce market competition,achieve sustainable development,and make greater contributions to the prosperity and development of the energy industry.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The interfacial thermal resistance(ITR)at material interfaces has emerged as a critical factor in the thermal management of micro/nanoelectronic devices and composite materials.Using non-equilibrium molecular dynamics...The interfacial thermal resistance(ITR)at material interfaces has emerged as a critical factor in the thermal management of micro/nanoelectronic devices and composite materials.Using non-equilibrium molecular dynamics simulations,we systematically investigate how simulation parameters affect the calculated ITR in Si/Ge heterojunctions.Our results demonstrate that the ITR decreases with increasing system length L_(sys)and thermal bath length L_(bath).We identify linear relationships between ITR and the inverse of both L_(sys)and L_(bath),enabling reliable extrapolation to infinite-system values.While the thermostat coupling constantτshows a negligible influence on ITR,excessively large values(τ>5 ps)compromise temperature control accuracy.Spectral analysis reveals that these size effects primarily originate from mid-to-low-frequency phonons(<6 THz),whose long mean free paths make their transport particularly sensitive to system dimensions.This work establishes fundamental guidelines for parameter selection in interfacial thermal transport simulations,while providing new insights into phonon-interface interactions.The findings offer valuable implications for thermal design in high-power devices and composite materials,where accurate ITR prediction is crucial for performance optimization.展开更多
The present study investigates the influence of thermal dispersion on the natural convective flow of a Casson fluid along an inclined plate embedded in a non-Darcy porous medium.The governing equations,representing mo...The present study investigates the influence of thermal dispersion on the natural convective flow of a Casson fluid along an inclined plate embedded in a non-Darcy porous medium.The governing equations,representing momentum and energy conservations,are transformed into non-dimensional form using similarity transformations.To address the complexity of the resulting equations,a bivariate spectral quasilinearisation method is employed.The effects of relevant parameters—including thermal dispersion,Casson parameter,Biot number,Forchheimer number,inclination angle and nonlinear thermal convection parameter—are thoroughly examined.The results show that the drag coefficient and heat transfer rate increase with the nonlinear thermal convection parameter,Casson parameter and Biot number.In contrast,they decrease as the Forchheimer number and inclination angle increase.The velocity near the surface of the inclined plate increases with the Biot number,Casson parameter and nonlinear thermal convection parameter.However,it decreases farther from the plate.Additionally,the temperature of the Casson fluid increases with most parameters,except the Casson and nonlinear thermal convection parameters.展开更多
Soil contamination remains a global problem,and numerous studies have been published for investigating soil re-mediation.Thermal desorption remediation(TDR)can significantly reduce the contaminants in the soil within ...Soil contamination remains a global problem,and numerous studies have been published for investigating soil re-mediation.Thermal desorption remediation(TDR)can significantly reduce the contaminants in the soil within a short time and consequently has been used worldwide.However,the soil properties respond to TDR differently and are dependent on the experimental set-up.The causative mechanisms of these differences are yet to be fully elucidated.A statistical meta-analysis was thus undertaken to evaluate the TDR treatment effects on soil properties and plant per-formance.This review pointed out that soil clay was reduced by 54.2%,while soil sand content was enhanced by 15.2% after TDR.This might be due to the release of cementing agents from clay minerals that resulted in the formation of soil aggregates.Soil electrical conductivity enhanced by 69.5% after TDR,which might be due to the heating-induced loss of structural hydroxyl groups and the consequent liberation of ions.The treatment of TDR leads to the reduction of plant germination rate,length,and biomass by 19.4%,44.8%,and 20.2%,respectively,compared to that of control soil.This might be due to the residue of contaminants and the loss of soil fertility during the thermal process that inhibited plant germination and growth.Soil pH and sulfate content increased with heating temperature increased,while soil enzyme activities decreased with thermal temperature increased.Overall,the results suggested that TDR treatment has inhibited plant growth as well as ecological restoration.展开更多
A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study ...A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study aims to explore the feasibility of an integrated compressed-air energy storage(CAES)coupled with insoluble sediment as the thermal storage media for salt caverns.In order to fulfill this objective,this study presents two steps to analyze the insoluble sediment's thermo-mechanical behavior under ordinary CAES conditions and coupled thermal energy storage(TES)conditions separately.A multiphysics-coupled numerical model was developed to investigate the thermal behavior of insoluble sediments at different heights.Then,a dual-cavity model with a sediment-filled channel was constructed to study the heat storage process in long-and short-term modes.Results demonstrated that sediment effectively protected cavern walls from thermal shocks caused by compressed air,maintaining temperature differentials within 1 K.Dual-cavity simulations revealed the sediment's capability to mitigate the temperature fluctuation of compressed air in caverns,achieving a 66% temperature reduction in the outflow interface during operation.The findings confirmed the feasibility of utilizing insoluble sediments for long-term thermal storage applications involving thermal cycles with ΔT=150 K,attaining a heat storage density of 50 kW·h/m^(3).The results show that the heat capacity of the sediment contributes to the cavern wall's stability and provide references for developing integrated CAES-TES systems in sediment-filled salt caverns.展开更多
High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate...High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.展开更多
文摘Six new lanthanide complexes:[Ln(3,4-DEOBA)3(4,4'-DM-2,2'-bipy)]2·2C_(2)H_(5)OH,[Ln=Dy(1),Eu(2),Tb(3),Sm(4),Ho(5),Gd(6);3,4-DEOBA-=3,4-diethoxybenzoate,4,4'-DM-2,2'-bipy=4,4'-dimethyl-2,2'-bipyridine]were successfully synthesized by the volatilization of the solution at room temperature.The crystal structures of six complexes were determined by single-crystal X-ray diffraction technology.The results showed that the complexes all have a binuclear structure,and the structures contain free ethanol molecules.Moreover,the coordination number of the central metal of each structural unit is eight.Adjacent structural units interact with each other through hydrogen bonds and further expand to form 1D chain-like and 2D planar structures.After conducting a systematic study on the luminescence properties of complexes 1-4,their emission and excitation spectra were obtained.Experimental results indicated that the fluorescence lifetimes of complexes 2 and 3 were 0.807 and 0.845 ms,respectively.The emission spectral data of complexes 1-4 were imported into the CIE chromaticity coordinate system,and their corre sponding luminescent regions cover the yellow light,red light,green light,and orange-red light bands,respectively.Within the temperature range of 299.15-1300 K,the thermal decomposition processes of the six complexes were comprehensively analyzed by using TG-DSC/FTIR/MS technology.The hypothesis of the gradual loss of ligand groups during the decomposition process was verified by detecting the escaped gas,3D infrared spectroscopy,and ion fragment information detected by mass spectrometry.The specific decomposition path is as follows:firstly,free ethanol molecules and neutral ligands are removed,and finally,acidic ligands are released;the final product is the corresponding metal oxide.CCDC:2430420,1;2430422,2;2430419,3;2430424,4;2430421,5;2430423,6.
文摘In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.
基金funded by Nansha District Science and Technology Project(Grant Number.2024ZD008)funded by China Geological Survey(Grant number:No.DD20230066,DD20242659).
文摘As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operation.The free-standing cold-water pipe(CWP)in the system withstands various complex loads during operation,posing potential failure risks.To reveal the deformation and stress mechanisms of OTEC CWPs,this study first analyzes wave particle velocity and acceleration to determine wave loads at different water depths.Based on the Euler-Bernoulli beam model,a quasi-static load calculation model for OTEC CWPs was established.The governing equations were discretized using the finite difference method,and matrix equations were solved to analyze bending deformation,bending moments,and surface stresses at discrete points along the pipe.Results indicate that water depths within 50 m represent a critical zone where wave particle velocity,acceleration,and wave loads exhibit significant variations in harmonic patterns,while beyond 50 m depth wave loads decrease linearly.Ocean currents and surface wind-driven currents substantially influence the CWP’s lateral displacement.Considering the effect of clump weights,the maximum lateral displacement occurs at 600–800 m below sea level.Utilizing large-wall-thickness high-strength pipes at the top section significantly enhances the structural safety of the CWP system.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.RS-2025-02315209).
文摘There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.
文摘The increasing demand due to development and advancement in every field of life has caused the depletion of fossil fuels.This depleting fossil fuel reserve throughout the world has enforced to get energy from alternative/renewable sources.One of the economicalways to get energy is through the utilization of solar ponds.In this study,a mathematical model of a salt gradient solar pond under the Islamabad climatic conditions has been analyzed for the first time.The model uses a one-dimensional finite difference explicit method for optimization of different zone thicknesses.The model depicts that NCZ(Non-Convective Zone)thickness has a significant effect on LCZ(Lower Convective Zone)temperature and should be kept less than 1.7mfor the optimal temperature.It is also observed that for long-termoperation of a solar pond,heat should be extracted by keeping the mass flowrate of 17.3 kg/m^(2)/day.Themodel also suggests that when the bottom reflectivity is about 0.3,then only 24%of the radiation is absorbed in the pond.
基金supported by research grants of the Iran National Science Foundation(INSF)under grant No.98002866。
文摘The efficiency of energy conversion from mechanical to electrical in AC generators is not entirely optimal,as power losses are converted into heat.Accurate thermal modeling and temperature measurement of advanced electric machines with complex structures are mandatory to confirm their reliability and safe operation.In a unique axial transverse flux switching permanent magnet(ATFSPM)generator,due to its high power density,large stray loss from leakage flux,compact topology,and totally enclosed structure,thermal analysis is of paramount significance.In this paper,thermal modeling and analysis of ATFSPM are carried out in detail using a three-dimensional(3D)finite element analysis(FEA)to evaluate the thermal condition for a precise performance improvement.To begin,all loss sources are accurately derived using 3-D FEA and analytical methods,taking into account the temperature dependence of material properties,and then losses are coupled to the thermal model as heat sources.Afterward,aiming for realistic thermal modelling,the convection heat transfer in the different regions of internal and external areas as well as thin layers of interface gaps between components are all considered.In addition,the prototype of ATFSPM is supplied to validate the accuracy of 3-D FEA temperature prediction.Furthermore,a novel technique is carried out to effectively improve thermal performance,enhance the efficiency,and limit hot-spot temperatures.The steady-state and transient temperature results demonstrate the high accuracy of the thermal modeling,enhance the secure operation of the ATFSPM,and facilitate increased loading utilizing the proposed technique.(1)
基金supported by the National Natural Science Foundation of China(52404259)supported by Youth Innovation Promotion Association CAS(Y201768)。
文摘The future large-scale application of sodium-ion batteries(SIBs)is inseparable from their excellent electrochemical performance and reliable safety characteristics.At present,there are few studies focusing on their safety performance.The analysis of thermal stability and structural changes within a single material cannot systematically describe the complex interplay of components within the battery system during the thermal runaway process.Furthermore,the reaction between the battery materials themselves and their counterparts within the system can stimulate more intense exothermic behavior,thereby affecting the safety of the entire battery system.Therefore,this study delved into the thermal generation and gas evolution characteristics of the positive electrode(Na_(x)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2),NFM111)and the negative electrode(hard carbon,HC)in SIBs,utilizing various material combinations.Through the integration of microscopic and macroscopic characterization techniques,the underlying reaction mechanisms of the positive and negative electrode materials within the battery during the heating process were elucidated.Three important results are derived from this study:(Ⅰ)The instability of the solid electrolyte interphase(SEI)leads to its decomposition at temperatures below 100℃,followed by extensive decomposition within the range of 100-150℃,yielding heat and the formation of inorganic compounds,such as Na_(2)CO_(3)and Na_(2)O;(Ⅱ)The reaction between NFM111 and the electrolyte constitutes the primary exothermic event during thermal abuse,with a discernible reaction also occurring between sodium metal and the electrolyte throughout the heating process;(Ⅲ)The heat production and gas generation behaviors of multi-component reactions do not exhibit complete correlation,and the occurrence of gas production does not necessarily coincide with thermal behavior.The results presented in this study can provide useful guidance for the safety improvement of SIBs.
基金supported by the National Key R&D Program of China(No.2021YFB2011300)the National Natural Science Foundation of China(Nos.52275044,U2233212)。
文摘The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.
文摘With the acceleration of intelligent transformation of energy system,the monitoring of equipment operation status and optimization of production process in thermal power plants face the challenge of multi-source heterogeneous data integration.In view of the heterogeneous characteristics of physical sensor data,including temperature,vibration and pressure that generated by boilers,steam turbines and other key equipment and real-time working condition data of SCADA system,this paper proposes a multi-source heterogeneous data fusion and analysis platform for thermal power plants based on edge computing and deep learning.By constructing a multi-level fusion architecture,the platform adopts dynamic weight allocation strategy and 5D digital twin model to realize the collaborative analysis of physical sensor data,simulation calculation results and expert knowledge.The data fusion module combines Kalman filter,wavelet transform and Bayesian estimation method to solve the problem of data time series alignment and dimension difference.Simulation results show that the data fusion accuracy can be improved to more than 98%,and the calculation delay can be controlled within 500 ms.The data analysis module integrates Dymola simulation model and AERMOD pollutant diffusion model,supports the cascade analysis of boiler combustion efficiency prediction and flue gas emission monitoring,system response time is less than 2 seconds,and data consistency verification accuracy reaches 99.5%.
基金funded by King Abdullah City for Atomic and Renewable Energy(KACARE),grant number“PC-2020-1”.
文摘High-concentration photovoltaic(HCPV)systems present significant thermal management challenges due to the intense heat fluxes generated under concentrated solar irradiation,especially in arid environments.Effective heat dissipation is critical to prevent performance degradation and structural failure.This study investigates the thermal performance and design optimization of an enhanced HCPV module,integrating numerical,analytical,and experimental methods.A coupled optical-thermal-electrical model was developed to simulate ray tracing,heat transfer,and temperature-dependent electrical behaviour,with predictions validated under real-world desert conditions.Compared to a baseline commercial module operating at 106℃,the optimized design achieved a peak temperature reduction of 16℃,lowering the cell temperature to 90℃under a concentration ratio of 961×and direct normal irradiance(DNI)of 950 W/m^(2).The total thermal resistance was reduced from 0.25 to 0.15 K/W(a 40%improvement),and the electrical efficiency increased from 37.5%to 38.6%,representing a relative gain of approximately 3.1%.The system consistently maintained a fill factor exceeding 78%,underscoring stable performance under high thermal load.These findings demonstrate that targeted thermal design,informed by integrated modeling,is essential for unlocking the reliability and efficiency of high-flux solar energy systems.
基金supported by the National Natural Science Foundation of China(No.42307090)the Open Subject from State Environmental Protection Key Laboratory of Aquatic Ecosystem Health in theMiddle and Lower Reaches of Yangtze River(No.AEHKF2023008).
文摘The copper complexing of dissolved organic matter released from hydrochar(HDOM)affects the former’s environmental behavior.In this study,how hydrothermal temperatures(180,220 and 260℃)influence the molecular-level constitutions and Cu(II)binding features of HDOM were elucidated via fourier transform ion cyclotron resonance mass spectrometry and multi-spectroscopic analysis.The findings demonstrated that the almost HDOM molecules had the traits of lower polarity and higher hydrophobicity.As the hydrothermal temperature increased,the molecules with particularly high relative strength gradually disappeared,average molecular weight,percentages of CHON and aliphatic compounds of HDOM reduced while the percentages of CHO and aromatic compounds increased.In general,the fluorescence quenching of Cu(II)weakened as hydrothermal temperature rose and the Cu(II)binding stability constants of fluorophores in HDOM were 4.50–5.31.In addition,the Cu(II) binding order of fluorophores in HDOM showed temperature heterogeneities, andpolysaccharides or aromatic rings of non-fluorescent substances had the fastest responsesto Cu(II) binding. Generally, fluorescent components tend to bind Cu(II) at relatively traceconcentrations (0–40 μmol/L), whereas non-fluorescent substances tend to the bind Cu(II)at relatively higher concentrations (50–100 μmol/L). This study contributed to the predictionof the potential environmental behaviors and risks of Cu(II) at the molecular level afterhydrochar application.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.D5000230061)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2025A1515011192).
文摘This study explores the magnetohydrodynamic(MHD)boundary layer flow of a water-based Boger nanofluid over a stretching sheet,with particular focus on the influences of nanoparticle diameter,nanolayer effects,and thermal radiation.The primary aim is to examine how variations in nanoparticle size and nanolayer thickness affect the hydrothermal behavior of the nanofluid.The model also incorporates the contributions of viscous dissipation and Joule heating within the heat transfer equation.The governing momentum and energy equations are converted into dimensionless partial differential equations(PDEs)using appropriate similarity variables and are numerically solved using the finite element method(FEM)implemented in MATLAB.Extensive validation of this method confirms its reliability and accuracy in numerical solutions.The findings reveal that increasing the diameter of copper nanoparticles significantly enhances the velocity profile,with a more pronounced effect observed at wider inter-particle spacings.A higher solvent volume fraction leads to decreased velocity and temperature distributions,while a greater relaxation time ratio improves velocity and temperature profiles due to the increased elastic response of the fluid.Moreover,enhancements in the magnetic parameter,thermal radiation,and Eckert number lead to an elevation in temperature profiles.Furthermore,higher nanolayer thickness reduces the temperature profile,whereas particle radius yields the opposite outcome.
基金supported by the 2022 Teaching Research Projects Competition of Santo Toribio de Mogrovejo Catholic University(USAT),under grant number 1 under the title:“Adding Value to Sugar Cane Bagasse and Yapatera Diatomaceous Earth as a Composite Material for Thermal Insulation”.
文摘This work quantifies the thermal performance of natural composite blocks made from Yapatera diatomaceous earth reinforced with sugarcane bagasse fibres.Prismatic specimens(185×185 mm)with three thicknesses(≈76 mm,100 mm,and 150 mm)and bagasse contents of 5–15%(wt.)were tested at hot-face temperatures of 100,250,and 450℃in a full-factorial 3×3×3 plan(54 tests).Thermal conductivity(k)was measured using a guarded hot-plate device aligned with ASTM D5470/E1530/C177.The measured k averaged 0.125 W/m·K(range~0.088–0.220 W/m·K)and remained stable in function up to 500℃.ANOVA showed that temperature and thickness significantly increased k(p<0.05),while fibre content had a weaker,non-monotonic effect beyond~10%.A response-surface model(RSM)provided accurate predictions(R^(2)≈0.95).For design purposes,thermal resistance was computed as R=Δx/k.A 150 mm block yielded R≈1.20 m^(2)K/W,comparable to~0.40 m of hollow ceramic brick and>1.0 m of concrete to reach a similar R.The composite therefore occupies a distinct niche:medium-performance insulation with high-temperature stability(≤500℃),low embodied energy(air-dried manufacturing,agro-waste feedstock),and competitive cost potential.These results support its use in industrial and building applications where conventional insulators are unsustainable or operate below the required temperature window.
文摘For thermal power enterprises,the traditional business model of scale expansion and a single product line restricts the development of electricity marketing.Therefore,to achieve the transformation and upgrading of their electricity marketing,this study starts from the current situation of the electricity market and introduces in detail the market-oriented electricity marketing strategies of thermal power enterprises from four aspects:product strategy,price strategy,channel strategy,and promotion strategy.The analysis finds that a market-oriented electricity marketing strategy is not only an inevitable choice for thermal power enterprises to respond to current challenges but also an essential path for them to move toward high-quality development.Through continuous innovation and upgrading,thermal power enterprises will maintain a leading position in fierce market competition,achieve sustainable development,and make greater contributions to the prosperity and development of the energy industry.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174276 and 12304059)the Basic and Applied Basic Research Foundation of Guangdong Province(Grant Nos.2024A1515010521,2024A1515012635,and 2022A1515110572).
文摘The interfacial thermal resistance(ITR)at material interfaces has emerged as a critical factor in the thermal management of micro/nanoelectronic devices and composite materials.Using non-equilibrium molecular dynamics simulations,we systematically investigate how simulation parameters affect the calculated ITR in Si/Ge heterojunctions.Our results demonstrate that the ITR decreases with increasing system length L_(sys)and thermal bath length L_(bath).We identify linear relationships between ITR and the inverse of both L_(sys)and L_(bath),enabling reliable extrapolation to infinite-system values.While the thermostat coupling constantτshows a negligible influence on ITR,excessively large values(τ>5 ps)compromise temperature control accuracy.Spectral analysis reveals that these size effects primarily originate from mid-to-low-frequency phonons(<6 THz),whose long mean free paths make their transport particularly sensitive to system dimensions.This work establishes fundamental guidelines for parameter selection in interfacial thermal transport simulations,while providing new insights into phonon-interface interactions.The findings offer valuable implications for thermal design in high-power devices and composite materials,where accurate ITR prediction is crucial for performance optimization.
文摘The present study investigates the influence of thermal dispersion on the natural convective flow of a Casson fluid along an inclined plate embedded in a non-Darcy porous medium.The governing equations,representing momentum and energy conservations,are transformed into non-dimensional form using similarity transformations.To address the complexity of the resulting equations,a bivariate spectral quasilinearisation method is employed.The effects of relevant parameters—including thermal dispersion,Casson parameter,Biot number,Forchheimer number,inclination angle and nonlinear thermal convection parameter—are thoroughly examined.The results show that the drag coefficient and heat transfer rate increase with the nonlinear thermal convection parameter,Casson parameter and Biot number.In contrast,they decrease as the Forchheimer number and inclination angle increase.The velocity near the surface of the inclined plate increases with the Biot number,Casson parameter and nonlinear thermal convection parameter.However,it decreases farther from the plate.Additionally,the temperature of the Casson fluid increases with most parameters,except the Casson and nonlinear thermal convection parameters.
基金the financial sponsorship from the National Key R&D Program of China(No.2023YFC3905800)Youth Innovation Promotion Association CAS(2021349)+5 种基金Guangdong Youth Talent Support Program(2021TQ06L121)State Key Laboratory of Subtropical Building Science in South China University of Technology(2022ZC01)Shenzhen Science and Technology Program(KCXFZ20211020163816023)financially supported by the Natural Science Foundation of Wuhan(No.2024040801020271)the Fundamental Research Funds for Central Public Welfare Research Institutes(No.CKSF20241004/YT)the support from FINNCERES flagship and tenure track fund(91160169(TT/Bordoloi)。
文摘Soil contamination remains a global problem,and numerous studies have been published for investigating soil re-mediation.Thermal desorption remediation(TDR)can significantly reduce the contaminants in the soil within a short time and consequently has been used worldwide.However,the soil properties respond to TDR differently and are dependent on the experimental set-up.The causative mechanisms of these differences are yet to be fully elucidated.A statistical meta-analysis was thus undertaken to evaluate the TDR treatment effects on soil properties and plant per-formance.This review pointed out that soil clay was reduced by 54.2%,while soil sand content was enhanced by 15.2% after TDR.This might be due to the release of cementing agents from clay minerals that resulted in the formation of soil aggregates.Soil electrical conductivity enhanced by 69.5% after TDR,which might be due to the heating-induced loss of structural hydroxyl groups and the consequent liberation of ions.The treatment of TDR leads to the reduction of plant germination rate,length,and biomass by 19.4%,44.8%,and 20.2%,respectively,compared to that of control soil.This might be due to the residue of contaminants and the loss of soil fertility during the thermal process that inhibited plant germination and growth.Soil pH and sulfate content increased with heating temperature increased,while soil enzyme activities decreased with thermal temperature increased.Overall,the results suggested that TDR treatment has inhibited plant growth as well as ecological restoration.
基金National Natural Science Foundation of China,Grant/Award Number:52090081 and 42477180Beijing Nova Program,Grant/Award Number:20250484906+2 种基金National Science and Technology Major Project of China,Grant/Award Number:2024ZD1003600SINOPEC Science and Technology Department Project,Grant/Award Number:P25006Young Elite Scientist Sponsorship Program by China Association for Science and Technology,Grant/Award Number:YESS20220300。
文摘A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study aims to explore the feasibility of an integrated compressed-air energy storage(CAES)coupled with insoluble sediment as the thermal storage media for salt caverns.In order to fulfill this objective,this study presents two steps to analyze the insoluble sediment's thermo-mechanical behavior under ordinary CAES conditions and coupled thermal energy storage(TES)conditions separately.A multiphysics-coupled numerical model was developed to investigate the thermal behavior of insoluble sediments at different heights.Then,a dual-cavity model with a sediment-filled channel was constructed to study the heat storage process in long-and short-term modes.Results demonstrated that sediment effectively protected cavern walls from thermal shocks caused by compressed air,maintaining temperature differentials within 1 K.Dual-cavity simulations revealed the sediment's capability to mitigate the temperature fluctuation of compressed air in caverns,achieving a 66% temperature reduction in the outflow interface during operation.The findings confirmed the feasibility of utilizing insoluble sediments for long-term thermal storage applications involving thermal cycles with ΔT=150 K,attaining a heat storage density of 50 kW·h/m^(3).The results show that the heat capacity of the sediment contributes to the cavern wall's stability and provide references for developing integrated CAES-TES systems in sediment-filled salt caverns.
文摘High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.
