High-temperature phase change materials(PCMs)have attracted significant attention in the field of thermal energy storage due to their ability to store and release large amounts of heat within a small temperature fluct...High-temperature phase change materials(PCMs)have attracted significant attention in the field of thermal energy storage due to their ability to store and release large amounts of heat within a small temperature fluctuation range.However,their practical application is limited due to problems such as leakage,corrosion,and volume changes at high temperatures.Recent research has shown that macroencapsulation technology holds promise in addressing these issues.This paper focuses on the macroencapsulation technology of high-temperature PCMs,starting with a review of the classification and development history of high-temperature macroencapsulatd PCMs.Four major encapsulation strategies,including electroplating method,solid/liquid filling method,sacrificial material method,and powder compaction into sphere method,are then summarized.The methods for effectively addressing issues such as corrosion,leakage,supercooling,and phase separation in PCMs are analyzed,along with approaches for improving the heat transfer performance,mechanical strength,and thermal cycling stability of macrocapsules.Subsequently,the structure and packing arrangement optimization of macrocapsules in thermal storage systems is discussed in detail.Finally,after comparing the performance of various encapsulation strategies and summarizing existing issues,the current technical challenges,improvement methods,and future development directions are proposed.More attention should be given to utilizing AI technology and reinforcement learning to reveal the multiphysics-coupled heat and mass transfer mechanisms in macrocapsule applications,as well as to optimize material selection and encapsulation parameters,thereby enhancing the overall efficiency of thermal storage systems.展开更多
In this article, a new kind of solar fresh air system is designed in order to realize the improvement of thermal efficiency by the integrated application of the PCMs and heat pipe technology. Under the adequate sunshi...In this article, a new kind of solar fresh air system is designed in order to realize the improvement of thermal efficiency by the integrated application of the PCMs and heat pipe technology. Under the adequate sunshine condition, the fresh air is directly delivered into the indoor environment after being heated by the solar collector. When the sun radiation is reduced, the heated air temperature can not satisfy the need of supply of air temperature.The main heat source is changed to phase change heat storage equipment instead of solar energy. The system adopt heat pipe for a high-efficiency and isothermal heat transfer which recover the shortcomings of PCMs such as： low coefficient of thermal conductivity and poor thermal efficiency. This article establishes the physical model of phase change solar energy fresh air thermal storage system and creates the mathematical model of its unsteady heat transfer to simulate and analyse the operation process by using Fluent software. The results of the study show that, compared to normal fresh air system, the phase change solar energy fresh air thermal storage system has a significant improvement in energy saving and indoor comfort level and will play an important role in the energy sustainable development.展开更多
The utilisation of waste in green sustainable technology can provide a clean environment and support energy demand.This work aims to design and analyse the performance of a developed indirect flat-plate Solar Air Heat...The utilisation of waste in green sustainable technology can provide a clean environment and support energy demand.This work aims to design and analyse the performance of a developed indirect flat-plate Solar Air Heater(SAH)integrated with an internal thermal storage unit using Waste Automotive Oil(WAO).The SAH was designed based on the circulation of confined air around the internal thermal storage unit due to the updraft effects of hot air.Two SAHs were tested to compare the performance of WAO and water,with the results being compared to previous work that utilised phase change material.Results showed that WAO responds faster in the early stage,while water has slightly higher daytime efficiency,with a maximum temperature of 60℃,while WAO reached a maximum temperature of 76℃.During the discharge cycle,WAO achieved an efficiency of 65.7%,while the water’s efficiency 73.2% within the same period.The highest outlet air temperatures recorded were 43℃ for WAO and 33.8℃ for water.These findings support that water is suitable for applications requiring rapid thermal charging,while WAO offers extended thermal stability.The study highlights the feasibility of using low-cost materials,such as WAO and water,to enhance the performance of solar energy systems,thereby making them more viable for industrial applications like drying and heating.展开更多
In order to address the synergistic optimization of energy efficiency improvement in the waste incineration power plant(WIPP)and renewable energy accommodation,an electricity-hydrogen-waste multi-energy system integra...In order to address the synergistic optimization of energy efficiency improvement in the waste incineration power plant(WIPP)and renewable energy accommodation,an electricity-hydrogen-waste multi-energy system integrated with phase change material(PCM)thermal storage is proposed.First,a thermal energy management framework is constructed,combining PCM thermal storage with the alkaline electrolyzer(AE)waste heat recovery and the heat pump(HP),while establishing a PCM-driven waste drying system to enhance the efficiency of waste incineration power generation.Next,a flue gas treatment method based on purification-separation-storage coordination is adopted,achieving spatiotemporal decoupling between waste incineration and flue gas treatment.Subsequently,a two-stage optimal dispatching strategy for the multi-energy system is developed:the first stage establishes a dayahead economic dispatch model with the objective of minimizing net system costs,while the second stage introduces model predictive control(MPC)to realize intraday rolling optimization.Finally,The optimal dispatching strategies under different scenarios are obtained using the Gurobi solver,followed by a comparative analysis of the optimized operational outcomes.Simulation results demonstrate that the proposed system optimizes the output and operational states of each unit,simultaneously reducing carbon trading costs while increasing electricity sales revenue.The proposed scheduling strategy demonstrates effective grid peak-shaving functionality,thereby simultaneously improving the system’s economic performance and operational flexibility while providing an innovative technical pathway for municipal solid waste(MSW)resource utilization and low-carbon transformation of energy systems.展开更多
The latent heat thermal energy storage system with solid-liquid phase-change material(SLPCM-LHTES)as energy storage medium provides outstanding advantages such as system simplicity,stable temperature control,and high ...The latent heat thermal energy storage system with solid-liquid phase-change material(SLPCM-LHTES)as energy storage medium provides outstanding advantages such as system simplicity,stable temperature control,and high energy storage density,showing great potential toward addressing the energy storage problems associated with decentralized,intermittent,and unstable renewable energy sources.Notably,effective heat transfer within the SLPCM-LHTES is crucial for extending its application potential.Therefore,a comprehensive understanding of the heat transfer processes in SLPCM-LHTES from a theoretical perspective is necessary.In this review,we propose a three-stage heat transfer pathway in SLPCM-LHTES,including external heating,interfacial heat transfer,and intrinsic phase transition processes.From the perspective of this three-stage pathway,the theoretical basis of heat transfer processes and typical efficiency enhancement strategies in SLPCM-LHTES are summarized.Moreover,an overview of the typical applications of SLPCM-LHTES in various fields,such as building energy efficiency,textiles and garments,and battery thermal management,is presented.Finally,the remaining challenges and possible avenues of research in this burgeoning field will also be discussed.展开更多
Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductiv...Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.展开更多
This work investigates the transient behaviour of a phase change material based cool thermal energy storage (CTES) system comprised of a cylindrical storage tank filled with encapsulated phase change materials (PCMs) ...This work investigates the transient behaviour of a phase change material based cool thermal energy storage (CTES) system comprised of a cylindrical storage tank filled with encapsulated phase change materials (PCMs) in spherical container integrated with an ethylene glycol chiller plant. A simulation program was developed to evaluate the temperature histories of the heat transfer fluid (HTF) and the phase change material at any axial location during the charging period. The results of the model were validated by comparison with experimental results of temperature profiles of HTF and PCM. The model was also used to investigate the effect of porosity, Stanton number, Stefan number and Peclet number on CTES system performance. The results showed that increase in porosity contributes to a higher rate of energy storage. However, for a given geometry and heat transfer coefficient, the mass of PCM charged in the unit decreases as the increase in porosity. The St number as well as the Ste number is also influential in the performance of the unit. The model is a convenient and more suitable method to determine the heat transfer characteristics of CTES system. The results reported are much useful for designing CTES system.展开更多
Aquifer thermal energy storage(ATES)system has received attention for heating or cooling buildings.However,it is well known that land subsidence becomes a major environmental concern for ATES projects.Yet,the effect o...Aquifer thermal energy storage(ATES)system has received attention for heating or cooling buildings.However,it is well known that land subsidence becomes a major environmental concern for ATES projects.Yet,the effect of temperature on land subsidence has received practically no attention in the past.This paper presents a thermo-hydro-mechanical(THM)coupled numerical study on an ATES system in Shanghai,China.Four water wells were installed for seasonal heating and cooling of an agriculture greenhouse.The target aquifer at a depth of 74e104.5 m consisted of alternating layers of sand and silty sand and was covered with clay.Groundwater level,temperature,and land subsidence data from 2015 to 2017 were collected using field monitoring instruments.Constrained by data,we constructed a field scale three-dimensional(3D)model using TOUGH(Transport of Unsaturated Groundwater and Heat)and FLAC3D(Fast Lagrangian Analysis of Continua)equipped with a thermo-elastoplastic constitutive model.The effectiveness of the numerical model was validated by field data.The model was used to reproduce groundwater flow,heat transfer,and mechanical responses in porous media over three years and capture the thermo-and pressure-induced land subsidence.The results show that the maximum thermoinduced land subsidence accounts for about 60%of the total subsidence.The thermo-induced subsidence is slightly greater in winter than that in summer,and more pronounced near the cold well area than the hot well area.This study provides some valuable guidelines for controlling land subsidence caused by ATES systems installed in soft soils.展开更多
In view of the Three North areas existing wind power absorption and environment pollution problems,the previous scholars have improved the wind abandon problem by adding electrothermal coupling equipment or optimizing...In view of the Three North areas existing wind power absorption and environment pollution problems,the previous scholars have improved the wind abandon problem by adding electrothermal coupling equipment or optimizing power grid operation.In this paper,an electrothermal integrated energy system including heat pump and thermal storage units was proposed.The scheduling model was based on the load data and the output characteristics of power units,each power unit capacity was programmed without constraints,and the proposed scheduling model was compared with the traditional combined heat and power scheduling model.Results showed that the investment and pollutant discharge of the system was reduced respectively.Wind power was fully absorbed.Compared with the traditional thermal power unit,the proportion of the output was significantly decreased by the proposed model.The proposed system could provide a new prospect for wind power absorption and environment protection.展开更多
High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate...High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.展开更多
A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study ...A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study aims to explore the feasibility of an integrated compressed-air energy storage(CAES)coupled with insoluble sediment as the thermal storage media for salt caverns.In order to fulfill this objective,this study presents two steps to analyze the insoluble sediment's thermo-mechanical behavior under ordinary CAES conditions and coupled thermal energy storage(TES)conditions separately.A multiphysics-coupled numerical model was developed to investigate the thermal behavior of insoluble sediments at different heights.Then,a dual-cavity model with a sediment-filled channel was constructed to study the heat storage process in long-and short-term modes.Results demonstrated that sediment effectively protected cavern walls from thermal shocks caused by compressed air,maintaining temperature differentials within 1 K.Dual-cavity simulations revealed the sediment's capability to mitigate the temperature fluctuation of compressed air in caverns,achieving a 66% temperature reduction in the outflow interface during operation.The findings confirmed the feasibility of utilizing insoluble sediments for long-term thermal storage applications involving thermal cycles with ΔT=150 K,attaining a heat storage density of 50 kW·h/m^(3).The results show that the heat capacity of the sediment contributes to the cavern wall's stability and provide references for developing integrated CAES-TES systems in sediment-filled salt caverns.展开更多
Rapid advances in thermal management technology and the increasing need for multi-energy conversion have placed stringent energy efficiency requirements on next-generation shape-stable composite phase change materials...Rapid advances in thermal management technology and the increasing need for multi-energy conversion have placed stringent energy efficiency requirements on next-generation shape-stable composite phase change materials(PCMs).Magnetically-responsive phase change thermal storage materials are considered an emerging concept for energy storage systems,enabling PCMs to perform unprecedented functions(such as green energy utilization,magnetic thermotherapy,drug release,etc.).The combination of multifunctional magnetic nanomaterials and PCMs is a milestone in the creation of advanced multifunctional composite PCMs.However,a timely and comprehensive review of composite PCMs based on magnetic nanoparticle modification is still missing.Herein,we furnish an exhaustive exposition elucidating the cutting-edge advancements in magnetically responsive composite PCMs.We delve deeply into the multifarious roles assumed by distinct nanoparticles within composite PCMs of varying dimensions,meticulously scrutinizing the intricate interplay between their architectures and thermophysical attributes.Moreover,we prognosticate future research trajectories,delineate alternative stratagems,and illuminate prospective avenues.This review is intended to stimulate broader academic interest in interdisciplinary fields and provide valuable insights into the development of next-generation magnetically-responsive composite PCMs.展开更多
Grid-scale energy storage systems provide effective solutions to address challenges such as supply-load imbalances and voltage violations resulting from the non-coinciding nature of renewable energy generation and pea...Grid-scale energy storage systems provide effective solutions to address challenges such as supply-load imbalances and voltage violations resulting from the non-coinciding nature of renewable energy generation and peak demand incidents.While battery and hydrogen storage are commonly used for peak shaving,ice-based thermal energy storage systems(TESSs)offer a direct way to reduce cooling loads without electrical conversion.This paper presents a multi-objective planning framework that optimizes TESS dispatch,network topology,and photovoltaic(PV)inverter reactive power support to address operational issues in active distribution networks.The objectives of the proposed scheme include minimizing peak demand,voltage deviations,and PV inverter VAr dependency.The mixed-integer nonlinear programming problem is solved using a Pareto-based multi-objective particle swarm optimization(MOPSO)method.The MATLAB-OpenDSS simulations for a modified IEEE-123 bus system show a 7.1%reduction in peak demand,a 13%reduction in voltage deviation,and a 52%drop in PV inverter VAr usage.The obtained solutions confirm minimal operational stress on control devices such as switches and PV inverters.Thus,unlike earlier studies,this work combines all three strategies to offer an effective solution for the operational planning of the active distribution network.展开更多
This paper presents a comprehensive experimental and numerical investigation of radiant floor heating(RFH)systems integrated with phase changematerial(PCM)-based thermal energy storage(TES).The study compares two unde...This paper presents a comprehensive experimental and numerical investigation of radiant floor heating(RFH)systems integrated with phase changematerial(PCM)-based thermal energy storage(TES).The study compares two underfloor pipe configurations:double serpentine and spiral.It also looks at how well a paraffin wax PCM system works with compact heat exchanger-type TES units during winter in Iraq.Key performance indicators including discharge temperature,heat transfer rate,liquid fraction evolution,and temperature uniformity were assessed through in situ experimental measurements and ANSYS fluent simulations.Results demonstrate that the spiral design provides slightly more uniform temperature distribution on the tile surface at an inlet water temperature of 55℃,with an average difference of approximately 0.5%,the serpentine layout exhibits higher slab temperature distribution by about 0.66%.Notably,the serpentine configuration shows superior thermal homogeneity and heat distribution,with a 15.05%increase in heat gain at a 55℃ inlet temperature compared to the spiral design.The performance gap between the two layouts narrows as the inlet temperature increases from 50℃ in 5℃ increments by approximately 4.1%,3.7%,and 1.7%,respectively.Higher inlet temperatures also improve PCM discharging and charging rates,improving energy storage utilization.The findings provide significant design guidelines for sustainable heating systems for cold climates.展开更多
The melting and solidification process of sodium nitrate, which is used as energy storage material, is studied in a vertical arranged energy storage device with two different bimetal finned tube designs （with and wit...The melting and solidification process of sodium nitrate, which is used as energy storage material, is studied in a vertical arranged energy storage device with two different bimetal finned tube designs （with and without additional lateral fins） for enhancing the heat transfer. The finned tube design consists of a plain steel tube while the material for the longitudinal （axial） fins is aluminum. The investigation analyses the influence of the lateral fins on the charging and discharging process. Three-dimensional transient numerical simulations are performed using the ANSYS Fluent 14.5 software. The results show that, every obstruction given by lateral fins reduces the melting and solidification velocity in direction to the outer shell.展开更多
Ice thermal storage is a promising technology to reduce energy costs by shifting the cooling cost from on-peak to off-peak periods. The paper investigates the application of ice thermal storage and its impact on energ...Ice thermal storage is a promising technology to reduce energy costs by shifting the cooling cost from on-peak to off-peak periods. The paper investigates the application of ice thermal storage and its impact on energy consumption, demand and total energy cost. Energy simulation software along with a chiller model is used to simulate the energy consumption and demand for the existing office building located in central Florida. Furthermore, the study presents a case study to demonstrate the cost saving achieved by the ice storage applications. The results show that although the energy consumption may increase by using ice thermal storage, the energy cost drops significantly, mainly depending on the local utility rate structure. It found that for the investigated system the annual energy consumption increases by about 12% but the annual energy cost drops by about 3 6%.展开更多
Thermal Energy Storage is becoming a necessary component of sustainable energy production systems as it helps alleviate intrinsic limitations of Renewable Energy Sources, such as intermittent use and mismatch between ...Thermal Energy Storage is becoming a necessary component of sustainable energy production systems as it helps alleviate intrinsic limitations of Renewable Energy Sources, such as intermittent use and mismatch between power demand and supply. This paper discusses a packed bed thermocline tank as a thermal energy storage solution. Firstly, this paper presents the development of a numerical model calculating heat transfers within the tank, based on a discretization over several nodes and the nodal formulation of the heat balance equation. The model considers a filler material and a heat transferring fluid and uses the finite difference method to calculate the temperature evolution of the two media across the tank. The model was validated with two different packed bed systems from the literature during a discharging process, presenting a good fit with the experimental results. Secondly, the experimental packed bed is presented and characterized for a charging cycle from ambient temperature to approximately 180?C. The charging experiment was accurately reproduced with the numerical model requiring minimal computational time. Two additional charging modes were simulated with different inlet HTF conditions: constant temperature and varying temperature following the profile produced by a thermal solar collector field. The temperature profiles obtained from the three charging modes were analysed and compared to each other. The proposed numerical and experimental tools will be used in future studies for a better understanding of the design and operating conditions of packed bed thermal energy storage systems.展开更多
The German Aerospace Center has merged a wide range of technological research and development for future cars in a project called ＂Next Generation Car＂. Within this large research project, three vehicle concepts for...The German Aerospace Center has merged a wide range of technological research and development for future cars in a project called ＂Next Generation Car＂. Within this large research project, three vehicle concepts for different applications （urban, regional and interurban） and with different powertrains （fuel-cell, battery and hybrid） will be developed. Research questions on different levels from conceptual question about vehicle modularity down to detailed technological aspects like combining hydrogen storage with cabin climatization and a systematic investigation of different thermal energy storage systems for electric vehicles concepts are covered by this project. To the latter, the contribution shows an overview about three thermal storage technologies--sensible solid media, metallic latent and thermochemical thermal energy storage systems--and details about the development of an electrically heated （power-to-heat） solid media storage system to achieve high storage densities and to allow flexible thermal discharging values. Central works target the identification of suitable thermal management solutions in future electric vehicle concepts to increase range, efficiency and flexibility.展开更多
Building energy analyses using forecasting optimization strategies are commonly used for predicting TES （thermal energy storage） system performance. These strategies produce perfect optimized cost savings and are no...Building energy analyses using forecasting optimization strategies are commonly used for predicting TES （thermal energy storage） system performance. These strategies produce perfect optimized cost savings and are not typically realized in the real world, unless a safety factor is applied. Rather than show how to improve the industry＇s ability to accurately model and simulate a true TES system design, this paper will show advanced building information strategies and energy management simulation techniques required to truly achieve the ideal optimized cost savings, determined from the TES energy simulation analysis. This paper uses the hospitality industry as a case study, showing the application of simulation and analytical modeling for an optimized partial TES system. As a result building energy managers can make better decisions through the entire building life cycle from the earliest concept model through operation and maintenance.展开更多
In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, i...In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, it is important to have spinning reserves in the grid and dispatchable power available, both offered by CSP-plants with integrated thermal energy storage. Enolcon is developing a new TES-system since several years. The system itself was designed to offer a principle simple and robust setup （with regard to execution and operation） and which is reducing the electricity costs of CSP-power plants by the consequent use of state of the art technology. Furthermore, such system shall be open to future developments of CSP-systems with regard to increasing steam temperatures and steam pressure. Such TES-system shall be commercially available for large scale application already in year 2014/2015. The key elements of the enolcon-TES are the open cycle using always ambient air with an air-air-heat exchanger and the arrangement of the storage material in such way to minimize the pressure losses and the own electricity consumption. The development is progressing in a structured way by studies, engineering works, TES-pilot plants, isothermal air flow test plant for the verification of the CFD-calculations, and since end of 2012 by the operation of a high temperature TES-module with all features of the large scale modules.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51976092)。
文摘High-temperature phase change materials(PCMs)have attracted significant attention in the field of thermal energy storage due to their ability to store and release large amounts of heat within a small temperature fluctuation range.However,their practical application is limited due to problems such as leakage,corrosion,and volume changes at high temperatures.Recent research has shown that macroencapsulation technology holds promise in addressing these issues.This paper focuses on the macroencapsulation technology of high-temperature PCMs,starting with a review of the classification and development history of high-temperature macroencapsulatd PCMs.Four major encapsulation strategies,including electroplating method,solid/liquid filling method,sacrificial material method,and powder compaction into sphere method,are then summarized.The methods for effectively addressing issues such as corrosion,leakage,supercooling,and phase separation in PCMs are analyzed,along with approaches for improving the heat transfer performance,mechanical strength,and thermal cycling stability of macrocapsules.Subsequently,the structure and packing arrangement optimization of macrocapsules in thermal storage systems is discussed in detail.Finally,after comparing the performance of various encapsulation strategies and summarizing existing issues,the current technical challenges,improvement methods,and future development directions are proposed.More attention should be given to utilizing AI technology and reinforcement learning to reveal the multiphysics-coupled heat and mass transfer mechanisms in macrocapsule applications,as well as to optimize material selection and encapsulation parameters,thereby enhancing the overall efficiency of thermal storage systems.
文摘In this article, a new kind of solar fresh air system is designed in order to realize the improvement of thermal efficiency by the integrated application of the PCMs and heat pipe technology. Under the adequate sunshine condition, the fresh air is directly delivered into the indoor environment after being heated by the solar collector. When the sun radiation is reduced, the heated air temperature can not satisfy the need of supply of air temperature.The main heat source is changed to phase change heat storage equipment instead of solar energy. The system adopt heat pipe for a high-efficiency and isothermal heat transfer which recover the shortcomings of PCMs such as： low coefficient of thermal conductivity and poor thermal efficiency. This article establishes the physical model of phase change solar energy fresh air thermal storage system and creates the mathematical model of its unsteady heat transfer to simulate and analyse the operation process by using Fluent software. The results of the study show that, compared to normal fresh air system, the phase change solar energy fresh air thermal storage system has a significant improvement in energy saving and indoor comfort level and will play an important role in the energy sustainable development.
文摘The utilisation of waste in green sustainable technology can provide a clean environment and support energy demand.This work aims to design and analyse the performance of a developed indirect flat-plate Solar Air Heater(SAH)integrated with an internal thermal storage unit using Waste Automotive Oil(WAO).The SAH was designed based on the circulation of confined air around the internal thermal storage unit due to the updraft effects of hot air.Two SAHs were tested to compare the performance of WAO and water,with the results being compared to previous work that utilised phase change material.Results showed that WAO responds faster in the early stage,while water has slightly higher daytime efficiency,with a maximum temperature of 60℃,while WAO reached a maximum temperature of 76℃.During the discharge cycle,WAO achieved an efficiency of 65.7%,while the water’s efficiency 73.2% within the same period.The highest outlet air temperatures recorded were 43℃ for WAO and 33.8℃ for water.These findings support that water is suitable for applications requiring rapid thermal charging,while WAO offers extended thermal stability.The study highlights the feasibility of using low-cost materials,such as WAO and water,to enhance the performance of solar energy systems,thereby making them more viable for industrial applications like drying and heating.
文摘In order to address the synergistic optimization of energy efficiency improvement in the waste incineration power plant(WIPP)and renewable energy accommodation,an electricity-hydrogen-waste multi-energy system integrated with phase change material(PCM)thermal storage is proposed.First,a thermal energy management framework is constructed,combining PCM thermal storage with the alkaline electrolyzer(AE)waste heat recovery and the heat pump(HP),while establishing a PCM-driven waste drying system to enhance the efficiency of waste incineration power generation.Next,a flue gas treatment method based on purification-separation-storage coordination is adopted,achieving spatiotemporal decoupling between waste incineration and flue gas treatment.Subsequently,a two-stage optimal dispatching strategy for the multi-energy system is developed:the first stage establishes a dayahead economic dispatch model with the objective of minimizing net system costs,while the second stage introduces model predictive control(MPC)to realize intraday rolling optimization.Finally,The optimal dispatching strategies under different scenarios are obtained using the Gurobi solver,followed by a comparative analysis of the optimized operational outcomes.Simulation results demonstrate that the proposed system optimizes the output and operational states of each unit,simultaneously reducing carbon trading costs while increasing electricity sales revenue.The proposed scheduling strategy demonstrates effective grid peak-shaving functionality,thereby simultaneously improving the system’s economic performance and operational flexibility while providing an innovative technical pathway for municipal solid waste(MSW)resource utilization and low-carbon transformation of energy systems.
基金financial support was provided by the National Natural Science Foundation of China(Nos.52476146,52006008,and 52471219)the Guangdong Basic and Applied Basic Research Foundation(2023A1515140059 and 2025A1515011255)+2 种基金the Peking University Third Hospital Haidian transformation project(HDCXZHKC2023210)the National Foreign Expert Individual Human Project(Category H,No.H20240116)the State Key Laboratory of New Ceramic Materials Tsinghua University(No.KFZD202402).
文摘The latent heat thermal energy storage system with solid-liquid phase-change material(SLPCM-LHTES)as energy storage medium provides outstanding advantages such as system simplicity,stable temperature control,and high energy storage density,showing great potential toward addressing the energy storage problems associated with decentralized,intermittent,and unstable renewable energy sources.Notably,effective heat transfer within the SLPCM-LHTES is crucial for extending its application potential.Therefore,a comprehensive understanding of the heat transfer processes in SLPCM-LHTES from a theoretical perspective is necessary.In this review,we propose a three-stage heat transfer pathway in SLPCM-LHTES,including external heating,interfacial heat transfer,and intrinsic phase transition processes.From the perspective of this three-stage pathway,the theoretical basis of heat transfer processes and typical efficiency enhancement strategies in SLPCM-LHTES are summarized.Moreover,an overview of the typical applications of SLPCM-LHTES in various fields,such as building energy efficiency,textiles and garments,and battery thermal management,is presented.Finally,the remaining challenges and possible avenues of research in this burgeoning field will also be discussed.
基金supported by the National Natural Science Foundation of China(No.52127816),the National Key Research and Development Program of China(No.2020YFA0715000)the National Natural Science and Hong Kong Research Grant Council Joint Research Funding Project of China(No.5181101182)the NSFC/RGC Joint Research Scheme sponsored by the Research Grants Council of Hong Kong and the National Natural Science Foundation of China(No.N_PolyU513/18).
文摘Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.
文摘This work investigates the transient behaviour of a phase change material based cool thermal energy storage (CTES) system comprised of a cylindrical storage tank filled with encapsulated phase change materials (PCMs) in spherical container integrated with an ethylene glycol chiller plant. A simulation program was developed to evaluate the temperature histories of the heat transfer fluid (HTF) and the phase change material at any axial location during the charging period. The results of the model were validated by comparison with experimental results of temperature profiles of HTF and PCM. The model was also used to investigate the effect of porosity, Stanton number, Stefan number and Peclet number on CTES system performance. The results showed that increase in porosity contributes to a higher rate of energy storage. However, for a given geometry and heat transfer coefficient, the mass of PCM charged in the unit decreases as the increase in porosity. The St number as well as the Ste number is also influential in the performance of the unit. The model is a convenient and more suitable method to determine the heat transfer characteristics of CTES system. The results reported are much useful for designing CTES system.
基金sponsored by the National Key Research and Development Program of China(Grant No.2020YFC1808102).
文摘Aquifer thermal energy storage(ATES)system has received attention for heating or cooling buildings.However,it is well known that land subsidence becomes a major environmental concern for ATES projects.Yet,the effect of temperature on land subsidence has received practically no attention in the past.This paper presents a thermo-hydro-mechanical(THM)coupled numerical study on an ATES system in Shanghai,China.Four water wells were installed for seasonal heating and cooling of an agriculture greenhouse.The target aquifer at a depth of 74e104.5 m consisted of alternating layers of sand and silty sand and was covered with clay.Groundwater level,temperature,and land subsidence data from 2015 to 2017 were collected using field monitoring instruments.Constrained by data,we constructed a field scale three-dimensional(3D)model using TOUGH(Transport of Unsaturated Groundwater and Heat)and FLAC3D(Fast Lagrangian Analysis of Continua)equipped with a thermo-elastoplastic constitutive model.The effectiveness of the numerical model was validated by field data.The model was used to reproduce groundwater flow,heat transfer,and mechanical responses in porous media over three years and capture the thermo-and pressure-induced land subsidence.The results show that the maximum thermoinduced land subsidence accounts for about 60%of the total subsidence.The thermo-induced subsidence is slightly greater in winter than that in summer,and more pronounced near the cold well area than the hot well area.This study provides some valuable guidelines for controlling land subsidence caused by ATES systems installed in soft soils.
基金the fund program of research on re-electrification(heat pump clean heating)to promote the new energy consumption in Shaanxi power grid(5226KY18002P).
文摘In view of the Three North areas existing wind power absorption and environment pollution problems,the previous scholars have improved the wind abandon problem by adding electrothermal coupling equipment or optimizing power grid operation.In this paper,an electrothermal integrated energy system including heat pump and thermal storage units was proposed.The scheduling model was based on the load data and the output characteristics of power units,each power unit capacity was programmed without constraints,and the proposed scheduling model was compared with the traditional combined heat and power scheduling model.Results showed that the investment and pollutant discharge of the system was reduced respectively.Wind power was fully absorbed.Compared with the traditional thermal power unit,the proportion of the output was significantly decreased by the proposed model.The proposed system could provide a new prospect for wind power absorption and environment protection.
文摘High-efficiency solar energy systems are characterized by their designs,which primarily rely on effective concentration and conversion methods of solar radiation.Evaluation of the performance enhancement of flat plate solar collectors by integration with thermal energy storage could be achieved through simulation of proposed designs.The work aims to analyze a new solar collector integrated with a porous medium and shell and coiled tube heat exchanger.The heat transfer enhancement was investigated by varying the geometrical parameters in shell and helically coiled tubes operating with CuFe_(2)O_(4)/water with different volume fractions of 0.02%,0.05%,and 0.1 vol.%.This study presents an experimental and numerical investigation of the performance of the flat plate solar collector integrated with a helical coil heat exchanger using nanofluids.The solar collector has a dimension of 180 cm×80 cm and works with close-loop systems operated by the thermo siphon method.Two types of helical coil heat exchangers,Coil-A and Coil-B have been investigated.The diameter of the glass porous media was investigated at 2,5,and 10 mm.The results manifested that the enhancement in the Nusselt number of the nanofluid reached maximum values of 15%,18%,and 22%for nanofluid ferrofluid with volume concentrations of 0.02%,0.05%,and 0.1%,respectively,for Coil-A.The maximum values of Nusselt number enhancement were 14%,17%,and 20%for ferrofluid concentrations of 0.02%,0.05%,and 0.1 vol.%,respectively,for Coil-B.The results also elucidated that the nanofluid mass flow and heat transfer rates could be noticeably compared to water.Where the increase is 5%,10%,and 20%for each concentration and diameter of the porous media,it specifies the enormous ranges of operational and geometrical parameters.
基金National Natural Science Foundation of China,Grant/Award Number:52090081 and 42477180Beijing Nova Program,Grant/Award Number:20250484906+2 种基金National Science and Technology Major Project of China,Grant/Award Number:2024ZD1003600SINOPEC Science and Technology Department Project,Grant/Award Number:P25006Young Elite Scientist Sponsorship Program by China Association for Science and Technology,Grant/Award Number:YESS20220300。
文摘A significant number of salt caverns have high proportions of insoluble sediments,but the thermal storage utilization potential of insoluble sediments remains understudied within current research.Therefore,this study aims to explore the feasibility of an integrated compressed-air energy storage(CAES)coupled with insoluble sediment as the thermal storage media for salt caverns.In order to fulfill this objective,this study presents two steps to analyze the insoluble sediment's thermo-mechanical behavior under ordinary CAES conditions and coupled thermal energy storage(TES)conditions separately.A multiphysics-coupled numerical model was developed to investigate the thermal behavior of insoluble sediments at different heights.Then,a dual-cavity model with a sediment-filled channel was constructed to study the heat storage process in long-and short-term modes.Results demonstrated that sediment effectively protected cavern walls from thermal shocks caused by compressed air,maintaining temperature differentials within 1 K.Dual-cavity simulations revealed the sediment's capability to mitigate the temperature fluctuation of compressed air in caverns,achieving a 66% temperature reduction in the outflow interface during operation.The findings confirmed the feasibility of utilizing insoluble sediments for long-term thermal storage applications involving thermal cycles with ΔT=150 K,attaining a heat storage density of 50 kW·h/m^(3).The results show that the heat capacity of the sediment contributes to the cavern wall's stability and provide references for developing integrated CAES-TES systems in sediment-filled salt caverns.
基金financially supported by the National Natural Science Foundation of China(No.51902025).
文摘Rapid advances in thermal management technology and the increasing need for multi-energy conversion have placed stringent energy efficiency requirements on next-generation shape-stable composite phase change materials(PCMs).Magnetically-responsive phase change thermal storage materials are considered an emerging concept for energy storage systems,enabling PCMs to perform unprecedented functions(such as green energy utilization,magnetic thermotherapy,drug release,etc.).The combination of multifunctional magnetic nanomaterials and PCMs is a milestone in the creation of advanced multifunctional composite PCMs.However,a timely and comprehensive review of composite PCMs based on magnetic nanoparticle modification is still missing.Herein,we furnish an exhaustive exposition elucidating the cutting-edge advancements in magnetically responsive composite PCMs.We delve deeply into the multifarious roles assumed by distinct nanoparticles within composite PCMs of varying dimensions,meticulously scrutinizing the intricate interplay between their architectures and thermophysical attributes.Moreover,we prognosticate future research trajectories,delineate alternative stratagems,and illuminate prospective avenues.This review is intended to stimulate broader academic interest in interdisciplinary fields and provide valuable insights into the development of next-generation magnetically-responsive composite PCMs.
基金supported by the US Appalachian Regional Commission(ARC)under Grant MU-21579-23。
文摘Grid-scale energy storage systems provide effective solutions to address challenges such as supply-load imbalances and voltage violations resulting from the non-coinciding nature of renewable energy generation and peak demand incidents.While battery and hydrogen storage are commonly used for peak shaving,ice-based thermal energy storage systems(TESSs)offer a direct way to reduce cooling loads without electrical conversion.This paper presents a multi-objective planning framework that optimizes TESS dispatch,network topology,and photovoltaic(PV)inverter reactive power support to address operational issues in active distribution networks.The objectives of the proposed scheme include minimizing peak demand,voltage deviations,and PV inverter VAr dependency.The mixed-integer nonlinear programming problem is solved using a Pareto-based multi-objective particle swarm optimization(MOPSO)method.The MATLAB-OpenDSS simulations for a modified IEEE-123 bus system show a 7.1%reduction in peak demand,a 13%reduction in voltage deviation,and a 52%drop in PV inverter VAr usage.The obtained solutions confirm minimal operational stress on control devices such as switches and PV inverters.Thus,unlike earlier studies,this work combines all three strategies to offer an effective solution for the operational planning of the active distribution network.
文摘This paper presents a comprehensive experimental and numerical investigation of radiant floor heating(RFH)systems integrated with phase changematerial(PCM)-based thermal energy storage(TES).The study compares two underfloor pipe configurations:double serpentine and spiral.It also looks at how well a paraffin wax PCM system works with compact heat exchanger-type TES units during winter in Iraq.Key performance indicators including discharge temperature,heat transfer rate,liquid fraction evolution,and temperature uniformity were assessed through in situ experimental measurements and ANSYS fluent simulations.Results demonstrate that the spiral design provides slightly more uniform temperature distribution on the tile surface at an inlet water temperature of 55℃,with an average difference of approximately 0.5%,the serpentine layout exhibits higher slab temperature distribution by about 0.66%.Notably,the serpentine configuration shows superior thermal homogeneity and heat distribution,with a 15.05%increase in heat gain at a 55℃ inlet temperature compared to the spiral design.The performance gap between the two layouts narrows as the inlet temperature increases from 50℃ in 5℃ increments by approximately 4.1%,3.7%,and 1.7%,respectively.Higher inlet temperatures also improve PCM discharging and charging rates,improving energy storage utilization.The findings provide significant design guidelines for sustainable heating systems for cold climates.
文摘The melting and solidification process of sodium nitrate, which is used as energy storage material, is studied in a vertical arranged energy storage device with two different bimetal finned tube designs （with and without additional lateral fins） for enhancing the heat transfer. The finned tube design consists of a plain steel tube while the material for the longitudinal （axial） fins is aluminum. The investigation analyses the influence of the lateral fins on the charging and discharging process. Three-dimensional transient numerical simulations are performed using the ANSYS Fluent 14.5 software. The results show that, every obstruction given by lateral fins reduces the melting and solidification velocity in direction to the outer shell.
文摘Ice thermal storage is a promising technology to reduce energy costs by shifting the cooling cost from on-peak to off-peak periods. The paper investigates the application of ice thermal storage and its impact on energy consumption, demand and total energy cost. Energy simulation software along with a chiller model is used to simulate the energy consumption and demand for the existing office building located in central Florida. Furthermore, the study presents a case study to demonstrate the cost saving achieved by the ice storage applications. The results show that although the energy consumption may increase by using ice thermal storage, the energy cost drops significantly, mainly depending on the local utility rate structure. It found that for the investigated system the annual energy consumption increases by about 12% but the annual energy cost drops by about 3 6%.
文摘Thermal Energy Storage is becoming a necessary component of sustainable energy production systems as it helps alleviate intrinsic limitations of Renewable Energy Sources, such as intermittent use and mismatch between power demand and supply. This paper discusses a packed bed thermocline tank as a thermal energy storage solution. Firstly, this paper presents the development of a numerical model calculating heat transfers within the tank, based on a discretization over several nodes and the nodal formulation of the heat balance equation. The model considers a filler material and a heat transferring fluid and uses the finite difference method to calculate the temperature evolution of the two media across the tank. The model was validated with two different packed bed systems from the literature during a discharging process, presenting a good fit with the experimental results. Secondly, the experimental packed bed is presented and characterized for a charging cycle from ambient temperature to approximately 180?C. The charging experiment was accurately reproduced with the numerical model requiring minimal computational time. Two additional charging modes were simulated with different inlet HTF conditions: constant temperature and varying temperature following the profile produced by a thermal solar collector field. The temperature profiles obtained from the three charging modes were analysed and compared to each other. The proposed numerical and experimental tools will be used in future studies for a better understanding of the design and operating conditions of packed bed thermal energy storage systems.
文摘The German Aerospace Center has merged a wide range of technological research and development for future cars in a project called ＂Next Generation Car＂. Within this large research project, three vehicle concepts for different applications （urban, regional and interurban） and with different powertrains （fuel-cell, battery and hybrid） will be developed. Research questions on different levels from conceptual question about vehicle modularity down to detailed technological aspects like combining hydrogen storage with cabin climatization and a systematic investigation of different thermal energy storage systems for electric vehicles concepts are covered by this project. To the latter, the contribution shows an overview about three thermal storage technologies--sensible solid media, metallic latent and thermochemical thermal energy storage systems--and details about the development of an electrically heated （power-to-heat） solid media storage system to achieve high storage densities and to allow flexible thermal discharging values. Central works target the identification of suitable thermal management solutions in future electric vehicle concepts to increase range, efficiency and flexibility.
文摘Building energy analyses using forecasting optimization strategies are commonly used for predicting TES （thermal energy storage） system performance. These strategies produce perfect optimized cost savings and are not typically realized in the real world, unless a safety factor is applied. Rather than show how to improve the industry＇s ability to accurately model and simulate a true TES system design, this paper will show advanced building information strategies and energy management simulation techniques required to truly achieve the ideal optimized cost savings, determined from the TES energy simulation analysis. This paper uses the hospitality industry as a case study, showing the application of simulation and analytical modeling for an optimized partial TES system. As a result building energy managers can make better decisions through the entire building life cycle from the earliest concept model through operation and maintenance.
文摘In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, it is important to have spinning reserves in the grid and dispatchable power available, both offered by CSP-plants with integrated thermal energy storage. Enolcon is developing a new TES-system since several years. The system itself was designed to offer a principle simple and robust setup （with regard to execution and operation） and which is reducing the electricity costs of CSP-power plants by the consequent use of state of the art technology. Furthermore, such system shall be open to future developments of CSP-systems with regard to increasing steam temperatures and steam pressure. Such TES-system shall be commercially available for large scale application already in year 2014/2015. The key elements of the enolcon-TES are the open cycle using always ambient air with an air-air-heat exchanger and the arrangement of the storage material in such way to minimize the pressure losses and the own electricity consumption. The development is progressing in a structured way by studies, engineering works, TES-pilot plants, isothermal air flow test plant for the verification of the CFD-calculations, and since end of 2012 by the operation of a high temperature TES-module with all features of the large scale modules.
