Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the ...Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the efficiency and quality of the problem solving process for conceptual design. AD is used for systematically defining and structuring a problem into a hierarchy. Sometimes, the design matrix is coupled in AD which indicates the functional requirements are coupled. TRIZ separation principles can be used to separate non-independent design parameters, which provide innovative solutions at each hierarchical level. We applied the integrated model to the heating and drying equipment of bitumen reproduction device. The result verifies that the integrated model can work very well in conceptual design.展开更多
As suggested by the title, this extensive book is concerned with crack and contact prob- lems in linear elasticity. However, in general, it is intended for a wide audience ranging from engineers to mathematical physic...As suggested by the title, this extensive book is concerned with crack and contact prob- lems in linear elasticity. However, in general, it is intended for a wide audience ranging from engineers to mathematical physicists. Indeed, numerous problems of both academic and tech- nological interest in electro-magnetics, acoustics, solid and fluid dynamics, etc. are actually related to each other and governed by the same mixed boundary value problems from a unified mathematical standpoint展开更多
It is a wrong viewpoint that the turbulence closure problem is due to thenon-linearity, of N-S equation, because if we omit the non-linear terms in N-Sequation,many, physical quantities can not be obtained other than...It is a wrong viewpoint that the turbulence closure problem is due to thenon-linearity, of N-S equation, because if we omit the non-linear terms in N-Sequation,many, physical quantities can not be obtained other than the mean-values. Inthis paper, we proof that the closure problem of turbulence be induced by lack ofstatistical disiribution in present turbulence theory. And the restriction of turbulencemodel theory and shortcoming of direct numerical simulation of N-S to solve theturbulence have been pointed out.展开更多
Based on the uncertainty theory, this paper is devoted to the redundancy allocation problem in repairable parallel-series systems with uncertain factors, where the failure rate, repair rate and other relative coeffici...Based on the uncertainty theory, this paper is devoted to the redundancy allocation problem in repairable parallel-series systems with uncertain factors, where the failure rate, repair rate and other relative coefficients involved are considered as uncertain variables. The availability of the system and the corresponding designing cost are considered as two optimization objectives. A crisp multiobjective optimization formulation is presented on the basis of uncertainty theory to solve this resultant problem. For solving this problem efficiently, a new multiobjective artificial bee colony algorithm is proposed to search the Pareto efficient set, which introduces rank value and crowding distance in the greedy selection strategy, applies fast non-dominated sort procedure in the exploitation search and inserts tournament selection in the onlooker bee phase. It shows that the proposed algorithm outperforms NSGA-II greatly and can solve multiobjective redundancy allocation problem efficiently. Finally, a numerical example is provided to illustrate this approach.展开更多
In this paper. we discuss the existence and stability of solution for two semi-homogeneous boundary value problems. The relative theorems in [1.2] are extended. Meanwhile. we obtain some new results.
Let be an undirected graph. The maximum cycle packing problem in G then is to find a collection of edge-disjoint cycles C<sub>i</sup>in G such that s is maximum. In general, the maximum cycle packing probl...Let be an undirected graph. The maximum cycle packing problem in G then is to find a collection of edge-disjoint cycles C<sub>i</sup>in G such that s is maximum. In general, the maximum cycle packing problem is NP-hard. In this paper, it is shown for even graphs that if such a collection satisfies the condition that it minimizes the quantityon the set of all edge-disjoint cycle collections, then it is a maximum cycle packing. The paper shows that the determination of such a packing can be solved by a dynamic programming approach. For its solution, an-shortest path procedure on an appropriate acyclic networkis presented. It uses a particular monotonous node potential.展开更多
As a result of the fierceness of business competition, companies, to remaincompetitive, have to charm their customers by anticipating their needs and being able to rapidlydevelop exciting new products for them. To ove...As a result of the fierceness of business competition, companies, to remaincompetitive, have to charm their customers by anticipating their needs and being able to rapidlydevelop exciting new products for them. To overcome this challenge, technology forecasting isconsidered as a powerful tool in today's business environment, while there are as many successstories as there are failures, a good application of this method will give a good result. Amethodology of integration of patterns or lines of technology evolution in TRIZ parlance ispresented, which is also known as TRIZ technology forecasting, as input to the QFD process to designa new product. For this purpose, TRIZ technology forecasting, one of the TRIZ major tools, isdiscussed and some benefits compared to the traditional forecasting techniques are highlighted. Thena methodology to integrate TRIZ technology forecasting and QFD process is highlighted.展开更多
Quality function deployment （QFD） is a quality system, that can help to design novel products that meet customers＇ needs. Theory of inventive problem solving （TRIZ） is a very powerful tool in helping to solve dif...Quality function deployment （QFD） is a quality system, that can help to design novel products that meet customers＇ needs. Theory of inventive problem solving （TRIZ） is a very powerful tool in helping to solve difficult technical problems encountered in the design process. Introducing QFD and TRIZ into the conceptual design of the pumping unit combines advantages of these two theories, therefore meeting different demands of different users. It can tell us “What should we do it” with QFD and “How should we do it” with TRIZ. The conceptual design method, which is based on QFD and TRIZ, is introduced andused to analyze and evaluate the conceptual design project of a pumping unit.展开更多
This paper presents the conceptual design stage in the product development process of a natural fiber composites of the side-door impact beam,which starts from idea generation to the selection of the best design conce...This paper presents the conceptual design stage in the product development process of a natural fiber composites of the side-door impact beam,which starts from idea generation to the selection of the best design concept.This paper also demonstrates the use of the integrated Theory of Inventive Problem Solving(Function-Oriented Search)(TRIZ(FOS))and Biomimetics method,as well as the VIseKriterijumska Optimizacija I Kompromisno Resenje(VIKOR)method.The aim of this study was to generate design concepts that were inspired by nature and to select the best design concept for the composite side-door impact beam.Subsequently,eight design concepts were generated using the TRIZ(FOS)-Biomimetics method and finite element analysis were used to analyse their performance and weight criteria using ANSYS software.VIKOR method was used as the multiple criteria decision making tools to compare their performances,weight and cost criteria.As a result,design concepts B-03 and C-02 were ranked as the first and second best,with VIKOR value of 0.0156 and 0.1178,respectively,which satisfied the conditions in VIKOR method.This paper shows that the integrated method of TRIZ(FOS)-Biomimetics and VIKOR can assist researchers and engineers in developing designs that are inspired by nature,as well as in selecting the best design concept using a systematic strategy and justified solutions during the conceptual design stage.展开更多
The conceptual design of mechatronic systems is addressed under the thrust of concurrent engineering and an enhanced conceptual design methodology describing the early design stage of mechatronic systems is presented ...The conceptual design of mechatronic systems is addressed under the thrust of concurrent engineering and an enhanced conceptual design methodology describing the early design stage of mechatronic systems is presented through an example illustration of a pick and place robot.This methodology treats each feasible solution as a solution strategy.In the methodology,Quality Function Deployment(QFD)is used as a baseline for the analysis of the mapping from customers to engineering requirements,Axiomatic Design(AD)is adopted as a guideline to generate feasible,good design solution alternatives,and Theory of Inventive Problem Solving(TRIZ)is applied to deal with domain conflicts in design.展开更多
This research is dedicated to assessment of a method that was earlier proposed and developed in order to increase the degree of automation and software involvement into conceptual decision making during design of stru...This research is dedicated to assessment of a method that was earlier proposed and developed in order to increase the degree of automation and software involvement into conceptual decision making during design of structural elements of buildings. Such instruments of the theory of inventive problem solving as contradiction and function analysis and trimming formed the basis of the proposed approach that was realized in a modern building information modeling software. The common logic of the approach is also provided in the article. Qualitative research methods and particularly collecting, analyzing and interpreting data were applied in this research. Firstly, a literature review of indexed journal articles in the field of the study was performed and some trends for possible development of the topic were identified. Secondly, a survey of potential users of the methodology was conducted and analyzed. The questionnaire results showed that the suggested method and its technical realization gained attraction among respondents, however, some of them are rather cautious regarding application of the approach potentials in their practice. The paper ends with evaluation results discussion, conclusion and proposals for further research.展开更多
In China there are such middle school English language teachers who are not qualified enough in listening and speaking to fulfill the requirements in their work due to lack of formal pre-service training. Therefore an...In China there are such middle school English language teachers who are not qualified enough in listening and speaking to fulfill the requirements in their work due to lack of formal pre-service training. Therefore an EOP （English for Occupational Purposes） course is needed to improve their related skills. In the design of the course, factors, such as the course takers, overall aims, needs, length, content, materials, training modes and assessment, are taken into consideration to make the course a systematic one. Besides, the background theory and the supporting syllabus for the course are presented and the potential problems are also analyzed in the course outline.展开更多
Translation is a critical element in the innovative theory of inventive problem solving(TRIZ)methodology. It entails three levels: translating specific practical problems into general TRIZ problems, translating genera...Translation is a critical element in the innovative theory of inventive problem solving(TRIZ)methodology. It entails three levels: translating specific practical problems into general TRIZ problems, translating general problems into methodological problems using TRIZ's innovation principles, and practically applying theoretical solutions. Moreover, translations of the same technical problems and TRIZ innovation principles may differ. We applied actor–network theory to explain significant differences in TRIZ translation mechanisms that could account for differences in problem-solving results in different regions. We found that variations in innovation elements among different scientific cultures directly influence TRIZ translation mechanisms.展开更多
The paper deals a fractional functional boundary value problems with integral boundary conditions. Besed on the coincidence degree theory, some existence criteria of solutions at resonance are established.
The green environmental laws and regulations are legislated, implemented, and enforced in many countries and economic regions. The provision of green products and services are the fast growing trend in global consumer...The green environmental laws and regulations are legislated, implemented, and enforced in many countries and economic regions. The provision of green products and services are the fast growing trend in global consumer markets. Therefore, introducing new products with environmental considerations becomes critical for global brand manufacturers. This research depicts an integrated and intelligent eco- and inno-product design methodology to support environmental friendly green product development. The methodology adopts approaches, such as life cycle assessment （LCA）, quality function deploymnet for environement （QFDE）, theory of inventive problem solving （TRIZ） and back-propagation network （BPN） to achieve eco- and inno-design objectives. LCA evaluates and compares the environmental impacts of production. QFDE transforms high-level concerns of environment into design requirements. When there are many historical QFDE data, the BPN prediction model is trained and deployed to automate the specifications of green design improvement. TRIZ is to support the creation of innovative product design ideas effectively and efficiently during the concept design stage. Finally, this paper presents two eco-design cases of power adaptor to demonstrate the proposed methodology.展开更多
Effective risk communication is essential for disaster risk management.Apart from empowering communities to make informed risk choices,risk information disclosure can also drastically enhance their disaster preparedne...Effective risk communication is essential for disaster risk management.Apart from empowering communities to make informed risk choices,risk information disclosure can also drastically enhance their disaster preparedness,especially concerning conjoint scenarios of technological and natural hazards(Natech).A fundamental precondition is the actual demand for such information.This study ventures to assess whether residents around Osaka Bay have this demand,or"appetite,"for risk information disclosure,as well as to understand their communicative behavior and perceived challenges in the Japanese context through the prism of the Situational Theory of Problem Solving.To test this framework under realistic conditions,data were collected through a household questionnaire survey from two urban areas near industrial complexes in Osaka Bay.The results show that identifying Natech risk information deficiency as a problem was not a statistically significant predictor for individuals'motivation to communicate.However,their motivation increased as their perceived personal involvement with the situation rose,while the perceived obstacles in doing something about it exerted a negative influence on their motivation.Individuals'motivation intensified their communicative actions to solve this problem.Public segmentation underscored the elevated public perceptions concerning the issue of risk information deficiency in nearly nine out of ten respondents.These findings indicate a strong community appetite for chemical and Natech risk information,which subsequently led to high situational motivation to engage in communicative action,particularly information acquisition.Risk management policy is suggested to focus on introducing chemical risk information disclosure regulatory initiatives to encourage citizen engagement.展开更多
Product innovation is often a process for improving existing products.Low-end disruptive innovation(LDI)enables a product to meet the most price-sensitive customers in the low-end market.The existing LDI methods are m...Product innovation is often a process for improving existing products.Low-end disruptive innovation(LDI)enables a product to meet the most price-sensitive customers in the low-end market.The existing LDI methods are mainly based on unnecessary characteristics of disruptive innovations.Thus,they cannot easily identify and respond to the LDI design needs.This study proposes a hybrid method for the product LDI in two levels of the product design based on the summarized definition and essential characteristics of LDI.Feasible areas of the product LDI are determined using a hybrid relational function model to identify the maturity of dominant technologies.The technologies are identified through the technical search and evaluation of the feasible area for innovation to form an initial LDI scheme.Then,the product function is optimized using the trimming concept of theory of inventive problem solving based on the characteristics of LDI.The final LDI scheme is formed and evaluated based on the essential characteristics of the product LDI.The feasibility of the proposed method is verified in the design of a new dropping pill machine.展开更多
基金Funded by the Natural Science Foundation of China (No. 50575083)
文摘Axiomatic design (AD) and theory of inventive problem solving (TRIZ) are widely used in conceptual design. Both of them have limitations, however. We presented an integrated model of these two methods to increase the efficiency and quality of the problem solving process for conceptual design. AD is used for systematically defining and structuring a problem into a hierarchy. Sometimes, the design matrix is coupled in AD which indicates the functional requirements are coupled. TRIZ separation principles can be used to separate non-independent design parameters, which provide innovative solutions at each hierarchical level. We applied the integrated model to the heating and drying equipment of bitumen reproduction device. The result verifies that the integrated model can work very well in conceptual design.
文摘As suggested by the title, this extensive book is concerned with crack and contact prob- lems in linear elasticity. However, in general, it is intended for a wide audience ranging from engineers to mathematical physicists. Indeed, numerous problems of both academic and tech- nological interest in electro-magnetics, acoustics, solid and fluid dynamics, etc. are actually related to each other and governed by the same mixed boundary value problems from a unified mathematical standpoint
文摘It is a wrong viewpoint that the turbulence closure problem is due to thenon-linearity, of N-S equation, because if we omit the non-linear terms in N-Sequation,many, physical quantities can not be obtained other than the mean-values. Inthis paper, we proof that the closure problem of turbulence be induced by lack ofstatistical disiribution in present turbulence theory. And the restriction of turbulencemodel theory and shortcoming of direct numerical simulation of N-S to solve theturbulence have been pointed out.
基金supported by National Natural Science Foundation of China (No. 71171199)Natural Science Foundation of Shaanxi Province of China (No. 2013JM1003)
文摘Based on the uncertainty theory, this paper is devoted to the redundancy allocation problem in repairable parallel-series systems with uncertain factors, where the failure rate, repair rate and other relative coefficients involved are considered as uncertain variables. The availability of the system and the corresponding designing cost are considered as two optimization objectives. A crisp multiobjective optimization formulation is presented on the basis of uncertainty theory to solve this resultant problem. For solving this problem efficiently, a new multiobjective artificial bee colony algorithm is proposed to search the Pareto efficient set, which introduces rank value and crowding distance in the greedy selection strategy, applies fast non-dominated sort procedure in the exploitation search and inserts tournament selection in the onlooker bee phase. It shows that the proposed algorithm outperforms NSGA-II greatly and can solve multiobjective redundancy allocation problem efficiently. Finally, a numerical example is provided to illustrate this approach.
文摘In this paper. we discuss the existence and stability of solution for two semi-homogeneous boundary value problems. The relative theorems in [1.2] are extended. Meanwhile. we obtain some new results.
文摘Let be an undirected graph. The maximum cycle packing problem in G then is to find a collection of edge-disjoint cycles C<sub>i</sup>in G such that s is maximum. In general, the maximum cycle packing problem is NP-hard. In this paper, it is shown for even graphs that if such a collection satisfies the condition that it minimizes the quantityon the set of all edge-disjoint cycle collections, then it is a maximum cycle packing. The paper shows that the determination of such a packing can be solved by a dynamic programming approach. For its solution, an-shortest path procedure on an appropriate acyclic networkis presented. It uses a particular monotonous node potential.
基金This project is supported by National Natural Science Foundation of China(No.20172041) and Provincial Science Foundation of Anhui, China (No.03042308).
文摘As a result of the fierceness of business competition, companies, to remaincompetitive, have to charm their customers by anticipating their needs and being able to rapidlydevelop exciting new products for them. To overcome this challenge, technology forecasting isconsidered as a powerful tool in today's business environment, while there are as many successstories as there are failures, a good application of this method will give a good result. Amethodology of integration of patterns or lines of technology evolution in TRIZ parlance ispresented, which is also known as TRIZ technology forecasting, as input to the QFD process to designa new product. For this purpose, TRIZ technology forecasting, one of the TRIZ major tools, isdiscussed and some benefits compared to the traditional forecasting techniques are highlighted. Thena methodology to integrate TRIZ technology forecasting and QFD process is highlighted.
文摘Quality function deployment （QFD） is a quality system, that can help to design novel products that meet customers＇ needs. Theory of inventive problem solving （TRIZ） is a very powerful tool in helping to solve difficult technical problems encountered in the design process. Introducing QFD and TRIZ into the conceptual design of the pumping unit combines advantages of these two theories, therefore meeting different demands of different users. It can tell us “What should we do it” with QFD and “How should we do it” with TRIZ. The conceptual design method, which is based on QFD and TRIZ, is introduced andused to analyze and evaluate the conceptual design project of a pumping unit.
基金the financial support provided through the Putra Grant IPS(GP-IPS/2016/9515100)Universiti Teknikal Malaysia Melaka and Ministry of Education Malaysia for providing scholarship to the principal author to carry out this research project.
文摘This paper presents the conceptual design stage in the product development process of a natural fiber composites of the side-door impact beam,which starts from idea generation to the selection of the best design concept.This paper also demonstrates the use of the integrated Theory of Inventive Problem Solving(Function-Oriented Search)(TRIZ(FOS))and Biomimetics method,as well as the VIseKriterijumska Optimizacija I Kompromisno Resenje(VIKOR)method.The aim of this study was to generate design concepts that were inspired by nature and to select the best design concept for the composite side-door impact beam.Subsequently,eight design concepts were generated using the TRIZ(FOS)-Biomimetics method and finite element analysis were used to analyse their performance and weight criteria using ANSYS software.VIKOR method was used as the multiple criteria decision making tools to compare their performances,weight and cost criteria.As a result,design concepts B-03 and C-02 were ranked as the first and second best,with VIKOR value of 0.0156 and 0.1178,respectively,which satisfied the conditions in VIKOR method.This paper shows that the integrated method of TRIZ(FOS)-Biomimetics and VIKOR can assist researchers and engineers in developing designs that are inspired by nature,as well as in selecting the best design concept using a systematic strategy and justified solutions during the conceptual design stage.
文摘The conceptual design of mechatronic systems is addressed under the thrust of concurrent engineering and an enhanced conceptual design methodology describing the early design stage of mechatronic systems is presented through an example illustration of a pick and place robot.This methodology treats each feasible solution as a solution strategy.In the methodology,Quality Function Deployment(QFD)is used as a baseline for the analysis of the mapping from customers to engineering requirements,Axiomatic Design(AD)is adopted as a guideline to generate feasible,good design solution alternatives,and Theory of Inventive Problem Solving(TRIZ)is applied to deal with domain conflicts in design.
文摘This research is dedicated to assessment of a method that was earlier proposed and developed in order to increase the degree of automation and software involvement into conceptual decision making during design of structural elements of buildings. Such instruments of the theory of inventive problem solving as contradiction and function analysis and trimming formed the basis of the proposed approach that was realized in a modern building information modeling software. The common logic of the approach is also provided in the article. Qualitative research methods and particularly collecting, analyzing and interpreting data were applied in this research. Firstly, a literature review of indexed journal articles in the field of the study was performed and some trends for possible development of the topic were identified. Secondly, a survey of potential users of the methodology was conducted and analyzed. The questionnaire results showed that the suggested method and its technical realization gained attraction among respondents, however, some of them are rather cautious regarding application of the approach potentials in their practice. The paper ends with evaluation results discussion, conclusion and proposals for further research.
文摘In China there are such middle school English language teachers who are not qualified enough in listening and speaking to fulfill the requirements in their work due to lack of formal pre-service training. Therefore an EOP （English for Occupational Purposes） course is needed to improve their related skills. In the design of the course, factors, such as the course takers, overall aims, needs, length, content, materials, training modes and assessment, are taken into consideration to make the course a systematic one. Besides, the background theory and the supporting syllabus for the course are presented and the potential problems are also analyzed in the course outline.
基金funded by the Influence of Scientific Culture on Economic and Social Development research program of the China Association for Science and Technology (no.2018YSXH1-4-1-2)
文摘Translation is a critical element in the innovative theory of inventive problem solving(TRIZ)methodology. It entails three levels: translating specific practical problems into general TRIZ problems, translating general problems into methodological problems using TRIZ's innovation principles, and practically applying theoretical solutions. Moreover, translations of the same technical problems and TRIZ innovation principles may differ. We applied actor–network theory to explain significant differences in TRIZ translation mechanisms that could account for differences in problem-solving results in different regions. We found that variations in innovation elements among different scientific cultures directly influence TRIZ translation mechanisms.
基金Supported by the Fundamental Research Funds for the Central Universities
文摘The paper deals a fractional functional boundary value problems with integral boundary conditions. Besed on the coincidence degree theory, some existence criteria of solutions at resonance are established.
基金supported by the National Science Council (NSC) in Taiwan
文摘The green environmental laws and regulations are legislated, implemented, and enforced in many countries and economic regions. The provision of green products and services are the fast growing trend in global consumer markets. Therefore, introducing new products with environmental considerations becomes critical for global brand manufacturers. This research depicts an integrated and intelligent eco- and inno-product design methodology to support environmental friendly green product development. The methodology adopts approaches, such as life cycle assessment （LCA）, quality function deploymnet for environement （QFDE）, theory of inventive problem solving （TRIZ） and back-propagation network （BPN） to achieve eco- and inno-design objectives. LCA evaluates and compares the environmental impacts of production. QFDE transforms high-level concerns of environment into design requirements. When there are many historical QFDE data, the BPN prediction model is trained and deployed to automate the specifications of green design improvement. TRIZ is to support the creation of innovative product design ideas effectively and efficiently during the concept design stage. Finally, this paper presents two eco-design cases of power adaptor to demonstrate the proposed methodology.
基金supported by the Ministry of Education,Culture,Sports,Science,and Technology of Japan(Monbukagakusho:MEXT Scholarship,2017-2019)。
文摘Effective risk communication is essential for disaster risk management.Apart from empowering communities to make informed risk choices,risk information disclosure can also drastically enhance their disaster preparedness,especially concerning conjoint scenarios of technological and natural hazards(Natech).A fundamental precondition is the actual demand for such information.This study ventures to assess whether residents around Osaka Bay have this demand,or"appetite,"for risk information disclosure,as well as to understand their communicative behavior and perceived challenges in the Japanese context through the prism of the Situational Theory of Problem Solving.To test this framework under realistic conditions,data were collected through a household questionnaire survey from two urban areas near industrial complexes in Osaka Bay.The results show that identifying Natech risk information deficiency as a problem was not a statistically significant predictor for individuals'motivation to communicate.However,their motivation increased as their perceived personal involvement with the situation rose,while the perceived obstacles in doing something about it exerted a negative influence on their motivation.Individuals'motivation intensified their communicative actions to solve this problem.Public segmentation underscored the elevated public perceptions concerning the issue of risk information deficiency in nearly nine out of ten respondents.These findings indicate a strong community appetite for chemical and Natech risk information,which subsequently led to high situational motivation to engage in communicative action,particularly information acquisition.Risk management policy is suggested to focus on introducing chemical risk information disclosure regulatory initiatives to encourage citizen engagement.
基金This research was sponsored by the National Natural Science Foundation of China(Grant Nos.51675159 and 51805142)the Central Government Guides Local Science and Technology Development Project of China(Grant No.18241837G)the National Innovation Method Fund of China(Grant No.2017IM040100).
文摘Product innovation is often a process for improving existing products.Low-end disruptive innovation(LDI)enables a product to meet the most price-sensitive customers in the low-end market.The existing LDI methods are mainly based on unnecessary characteristics of disruptive innovations.Thus,they cannot easily identify and respond to the LDI design needs.This study proposes a hybrid method for the product LDI in two levels of the product design based on the summarized definition and essential characteristics of LDI.Feasible areas of the product LDI are determined using a hybrid relational function model to identify the maturity of dominant technologies.The technologies are identified through the technical search and evaluation of the feasible area for innovation to form an initial LDI scheme.Then,the product function is optimized using the trimming concept of theory of inventive problem solving based on the characteristics of LDI.The final LDI scheme is formed and evaluated based on the essential characteristics of the product LDI.The feasibility of the proposed method is verified in the design of a new dropping pill machine.
