The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Vetiver(Vetiveria zizanioides)is often extracted as essential oils used in cosmetics,but there are few indepth reports on its cosmetic and skincare efficacy.In order to explore the neuro-cosmetic activity of vetiver e...Vetiver(Vetiveria zizanioides)is often extracted as essential oils used in cosmetics,but there are few indepth reports on its cosmetic and skincare efficacy.In order to explore the neuro-cosmetic activity of vetiver extract,ELISA and Griess methods were used to detect the secretion levels of related neural and inflammatory mediators,and TRPV1 activity was analyzed by fluorescence staining in this study.The results shows that in vitro cell models,1%vetiver extract decreases cortisol production by 25.8%and increases beta-endorphin secretion by 287.9%when the calcium influx induced by TRPV1 activation is blocked and the inhibitory rate is 22.9%.And 2%vetiver extract decreases the levels of NO,TNF-αand IL-6 when the inhibition rates are 86.3%,69.4%and 81.8%,respectively.Therefore,vetiver extract can effectively combat skin stress,relieve skin discomfort caused by inflammation and nerve sensitivity,thus providing a feeling of well-being.The vetiver extract has skincare benefits at the neurological level which shows potential for neuro-cosmetic application.展开更多
The lack of macro-continuity and mechanical strength of covalent organic frameworks(COFs)has significantly limited their practical applications.Here,we propose an“alcohol-triggered defect cleavage”strategy to precis...The lack of macro-continuity and mechanical strength of covalent organic frameworks(COFs)has significantly limited their practical applications.Here,we propose an“alcohol-triggered defect cleavage”strategy to precisely regulate the growth and stacking of COF grains through a moderate reversed Schiff base reaction,realizing the direct synthesis of COF nanofibers(CNFs)with high aspect ratio(L/D=103.05)and long length(>20μm).An individual CNF exhibits a biomimetic scale-like architecture,achieving superior flexibility and fatigue resistance under dynamic bending via a multiscale stress dissipation mechanism.Taking advantages of these structural features,we engineer CNF aerogels(CNF-As)with programmable porous structures(e.g.,honeycomb,lamellar,isotropic)via directional ice-template methodology.CNF-As demonstrate 100%COF content,high specific surface area(396.15 m^(2)g^(-1))and superelasticity(~0%elastic deformation after 500 compression cycles at 50%strain),outperforming most COF-based counterparts.Compared with the conventional COF aerogels,the unique structural features of CNF-A enable it to perform outstandingly in uranium extraction,with an 11.72-fold increment in adsorption capacity(920.12 mg g^(-1))and adsorption rate(89.9%),and a 2.48-fold improvement in selectivity(U/V=2.31).This study provides a direct strategy for the development of next-generation COF materials with outstanding functionality and structural robustness.展开更多
N,N,N',N'-tetraoctyl diglycolamide(TODGA)is a potential extractant for the co-extraction of lanthanides and actinides in high-level liquid waste.In this study,the radiolysis and extraction properties of TODGA ...N,N,N',N'-tetraoctyl diglycolamide(TODGA)is a potential extractant for the co-extraction of lanthanides and actinides in high-level liquid waste.In this study,the radiolysis and extraction properties of TODGA in kerosene solvents contacted with the aqueous phase of varying HNO_(3) concentrations were systematically investigated,and the complexation mechanism was analyzed in conjunction with density functional theory(DFT)calculations.After γ-irradiation,the variation of TODGA concentration was detected,and the variation trends in the relative content of radiolysis products(RPs)with sample type and absorbed dose were demonstrated.Results indicated that the breaking of the amide bond,ether bond,and C_(amide)-C_(ether)bond was the primary radiolysis routes.The aqueous-phase precipitate was studied as a potential new mode of TODGA radiolysis in ultrapure water aqueous phase.Moreover,TODGA/kerosene exhibited excellent extraction capabilities for lanthanides even after absorbing 100 kGy,and HNO_(3) can maintain a portion of TODGA's extraction capacity.The DFT method was applied to calculate and evaluate the complexing ability of TODGA and some of its RPs toward lanthanides.The results revealed that the complexing ability of TODGA for Ce(Ⅲ),Eu(Ⅲ),and Dy(Ⅲ)was enhanced successively,and the complexing ability of the RPs with intact oxygen-containing structures could not be neglected.展开更多
Chamaedorea seifrizii is a bamboo plant that is mainly used for its air-purifying properties and ornamental value.Due to the scarcity of reports on its phytochemical constitutes,this study was aimed at chemical profil...Chamaedorea seifrizii is a bamboo plant that is mainly used for its air-purifying properties and ornamental value.Due to the scarcity of reports on its phytochemical constitutes,this study was aimed at chemical profiling,phytochemical analysis and evaluation of its in-vitro biological activities of acetone extracts of auxiliary inflorescence and fruits of Chamaedorea seifrizii accompanied by in-silico analysis.Standard techniques were employed for phytochemical screening of phenolics,flavonoids and tannins and anti-oxidant and anti-inflammatory tests.In-silico analysis coupled with molecular dynamics simulation was also conducted to find out interaction of some components to inflammatory responses.Bioactive compounds in auxiliary inflorescence and fruit extracts were studied using a gas chromatography-flame ionization detector(GC-FID).Numerous antioxidant tests were carried out,including those for 2,2-diphenyl-1-picrylhydrazyl(DPPH),hydroxyl radicals,and nitric oxide radicals and shown that all both extracts depicted exorbitant levels of activities with values ranging from 48 to 96%.Results of GC-FID revealed maximum 18-22 constituents in acetone fractions with phenethyl cinnamate and hinokione as predominant components in auxiliary inflorescence and fruits,respectively.In addition,a strong anti-inflammatory activity was observed with acetone containing extracts.In-silico analysis validated the interaction of phytocomponents to inflammation initiation enzymes.Phytochemicals found in Chamaedorea seifrizii extracts may have pharmacological,antioxidant and anti-inflammatory properties.Chamaedorea seifrizii may be used in this study to produce new herbal remedies for a range of illnesses,perhaps resulting in the development of novel drugs.展开更多
Peony root bark extract as was used the research object,and used a series of biochemical and cellular experiments to investigate its whitening,anti-inflammatory,oil control,acne,and inhibition of the growth of Malasse...Peony root bark extract as was used the research object,and used a series of biochemical and cellular experiments to investigate its whitening,anti-inflammatory,oil control,acne,and inhibition of the growth of Malassezia.The results showed that the inhibition rate of melanin synthesis was significantly increased to 86.43%at a concentration of 2.0%;the secretion of inflammatory factors IL-1αand IL-6 by macrophages(RAW264.7)was significantly reduced to 4.94 pg/mL and 6.42 pg/mL,respectively;the fluorescence signal of Nile red in sebaceous gland cells(SZ95)was significantly reduced to 57.5%;the inhibition rate of Propionibacterium acnes was 37.7%for 20 min of action;and the average inhibition rate of Malassezia marcescens was 78.1%for 20 min of action.Thus,it can be seen that the peony root bark extract has multiple skin-care effects and is a natural and healthy cosmetic plant raw material,which provides a solid theoretical basis for its application in cosmetics.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer r...The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.展开更多
Thermoelectric(TE)materials,which are capable of direct conversion between heat and electricity,offer a promising solution for sustainable energy harvesting.Conjugated polymers have emerged as compelling candidates fo...Thermoelectric(TE)materials,which are capable of direct conversion between heat and electricity,offer a promising solution for sustainable energy harvesting.Conjugated polymers have emerged as compelling candidates for flexible TE devices owing to their intrinsic flexibility,low cost,and low thermal conductivity.The performance of polymer-based organic thermoelectrics(OTEs)is profoundly influenced by the processing methods,which dictate molecular packing,crystallinity,and film morphology.This review systematically summarizes recent advances in polymer processing techniques for TE applications,including solution processing,patterning techniques,and large-area fabrication.We discuss the interrelationships among processing techniques,polymer microstructure,and TE performance,concluding with the current challenges and future perspectives for industrializing high-performance OTE devices.展开更多
Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentrat...Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.展开更多
In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air ...In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air suction during the steady-state casting and filling process,was comparatively studied through physical modeling and mathematical simulation methods.During the filling process,the liquid surface forms a large-size slag eye under the impact of molten steel from a ladle shroud,which simultaneously results in a violent fluctuation of liquid level.Concurrently,the liquid flow entrains the air phase and the cover slag into the tundish impact zone,resulting in slag entrapment and air suction.At filling flow rates of 1.5Q,2.0Q,and 2.5Q(Q is the flow rate under steady-state casting),the amount of slag entrapped is 8.39×10^(-5),9.65×10^(-5),and 12.7×10^(-5)m^(3),respectively,while the volume of air aspirated is 0.84×10^(-4),1.47×10^(-4),and 2.01×10^(-4)m^(3),indicating that slag entrapment and air suction intensify with an increase in tundish filling flow rate.Flow field characterization identifies eddy currents in the impact zone as the primary driver of the above phenomena.Proper filling process parameters were proposed to improve the steel quality during the tundish filling.展开更多
While nuclear energy represents a low-carbon and high-efficiency energy source that plays a vital role in the global energy mix,the limitations of spent fuel reprocessing technology pose a major challenge to its susta...While nuclear energy represents a low-carbon and high-efficiency energy source that plays a vital role in the global energy mix,the limitations of spent fuel reprocessing technology pose a major challenge to its sustainable development.The PUREX(plutonium uranium redox extraction)process is currently the dominant nuclear fuel reprocessing technology in the world.However,the key extractant in this process is tributyl phosphate(TBP),which degrades under intense radiation,high temperatures,and strong acidity.This leads to the production of dibutyl phosphate,monobutyl phosphate,and other degradation byproducts,which may reduce the extraction efficiency and trigger third-phase formation and equipment corrosion.This paper systematically reviews the degradation mechanisms of TBP and its diluents,the analytical technique suitable for characterizing degradation products,and the impact of degradation products on the post-treatment process.Additionally,optimization strategies employed for suppressing third-phase formation are discussed.This study offers a theoretical foundation and technical insights in optimizing the PUREX process and ensuring the safe operation of the post-treatment process.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This pap...Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This paper analyzes the existing problems in the current teaching of Chinese Medicine Processing Technology courses,discusses the necessity of reforming the teaching model under the context of integration,and proposes the construction of a"Dual-Capability Progression,Six-Dimensional Empowerment"teaching model.The aim is to enhance the teaching quality of Chinese Medicine Processing Technology courses and cultivate high-quality skilled talents in Chinese medicine processing who can meet industry demands.展开更多
Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed f...Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed flow-through electrochemical reactors(FERs)primarily based on porous electrodes,where the pore structure significantly impacts the electrochemical reaction.Therefore,this study systematically investigated the impact of different pore sizes on the fluid dynamics,current potential distribution,mass transfer processes,and degradation performance of FERs.Computational Fluid Dynamics(CFD)results indicated that smaller pore sizes(10μm,30μm,and 60μm)significantly enhanced convective effects within the fluid,reduced short fluid paths and dead volume regions within the microchannels,and facilitated mass transfer processes.Additionally,smaller pore sizes were conducive to a uniform distribution of current density.Furthermore,Fe(CN)_(6)^(4−)oxidation experiments revealed that the current density at a pore size of 160μm was notably lower than that at 10μm,indicating slower mass transfer of Fe(CN)_(6)^(4−)within larger channels.Calculations based on experimental results demonstrated that the mass transfer rate at a pore size of 10μm was six times than that at 160μm,further confirming the enhancing effect of smaller pore sizes on the mass transfer process.Lastly,experiments on tetracycline degradation showed that at a residence time of 90 s,the removal efficiencies of tetracycline were 80%and 39.1%for porous electrodes with pore sizes of 10μm and 160μm,respectively,demonstrating the superior removal efficiency of smaller pore sizes for tetracycline degradation.展开更多
[Objectives]To investigate the optimal extraction conditions for anthocyanins from defatted Lycium ruthenicum Murray using ultrasonic-assisted solvent extraction.[Methods]Anthocyanins were extracted from wild L.ruthen...[Objectives]To investigate the optimal extraction conditions for anthocyanins from defatted Lycium ruthenicum Murray using ultrasonic-assisted solvent extraction.[Methods]Anthocyanins were extracted from wild L.ruthenicum in Qinghai Province using ultrasonic-assisted ethanol extraction.Through single-factor and orthogonal experiments,the optimal extraction conditions were determined as follows:temperature 50℃,solid-liquid ratio 1:15(g/mL),ethanol concentration 60%(v/v),and ultrasonic extraction time 25 min.Under these conditions,the anthocyanin content of L.ruthenicum was quantified by UV-Vis spectrophotometry at 280 nm.[Results]The extraction yield of anthocyanins from wild Qinghai L.ruthenicum was 17.0 mg/g,which is superior to the yield of 10.0 mg/g obtained by water solvent extraction,representing a 0.7%increase in extraction rate.The anthocyanin content in L.ruthenicum from different regions was determined,revealing that samples from the Chaidamu area in Qinghai had the highest content(17.3 mg/g),while samples from the Gansu area had the lowest(12.0 mg/g).[Conclusions]Ultrasonic-assisted ethanol extraction technology offers advantages including rapid operation,low energy consumption,high extraction yield,simple detection,and safety.展开更多
To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is...To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.展开更多
Bio-oil is a renewable fuel that can be obtained from biomass waste,such as empty palm fruit bunches,sugarcane bagasse,and rice husks.Within a biorefinery framework,bio-oil had not met the standards as a fuel due to t...Bio-oil is a renewable fuel that can be obtained from biomass waste,such as empty palm fruit bunches,sugarcane bagasse,and rice husks.Within a biorefinery framework,bio-oil had not met the standards as a fuel due to the presence of impurities like corrosive phenol.Therefore,the separation of phenol from bio-oil is essential and can be achieved using the extraction method.In this study,biomass wastes(empty fruit bunches of oil palm,sugarcane bagasse,and rice husk)were pyrolyzed in a biorefinery framework to produce bio-oil,which was then refined through liquid-liquid extraction with a methanol-chloroform and ethyl acetate solvents to remove its phenolic compound.The extraction with methanol-chloroform solvent was carried out for 1 h at 50℃.Meanwhile,extraction with ethyl acetate solvent was carried out for 3 h at 70℃.Both extractions used the same variations,i.e.,bio-oil:solvent ratio at 1:1,1:2,1:3,and 1:4,and stirring speeds of 150 rpm,200 rpm,250 rpm,and 300 rpm.The bio-oil obtained from this study contained complex chemical compounds and had characteristics such as a pH of 5,a density of 1.116 g/mL,and a viscosity of 29.57 cSt.Theoptimization results using response surface methodology(RSM)showed that the best yield formethanolchloroform was 72.98%at a stirring speed of 250 rpm and a ratio of 1:3.As for ethyl acetate solvent,the highest yield obtained was 71.78%at a stirring speed of 237.145 rpm and a ratio of 1:2.展开更多
The current vanadium extraction process from sodium roasted vanadium slag poses risks such as ammonia pollution.This study proposes a novel calcium-based vanadium extraction and hydrolysis precipitation process,achiev...The current vanadium extraction process from sodium roasted vanadium slag poses risks such as ammonia pollution.This study proposes a novel calcium-based vanadium extraction and hydrolysis precipitation process,achieving clean and efficient vanadium recovery.The introduction of Ca O facilitates the targeted reconstruction and conversion of vanadium and calcium in the solution,forming acidsoluble calcium vanadate intermediates.Under optimal conditions,n(Ca)/n(V)ratio of 1.75,extraction temperature of 90℃,and extraction time of 90 min,the vanadium extraction ratio reached 99.83%.This process also separates vanadium from sodium and silicon,enabling one-step purification of the vanadium solution.Subsequent sulfuric acid leaching,conducted at p H of 4.0,90℃,and 60 min,achieved a vanadium leaching ratio of 99.72%,further separating vanadium from calcium and other impurities.Finally,the purified vanadium solution underwent hydrolysis precipitation at p H of 2.1 and 95℃for60 min,achieving a precipitation ratio of 98.69%.The calcined product yielded V_(2)O_(5) with a purity of 98.60%.Compared to the conventional sodium roasting—water leaching along with ammonium salt precipitation process,this innovative method eliminates ammonia-nitrogen wastewater emissions.This study provides a foundation for the development of new vanadium extraction technologies from vanadium slag.展开更多
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Vetiver(Vetiveria zizanioides)is often extracted as essential oils used in cosmetics,but there are few indepth reports on its cosmetic and skincare efficacy.In order to explore the neuro-cosmetic activity of vetiver extract,ELISA and Griess methods were used to detect the secretion levels of related neural and inflammatory mediators,and TRPV1 activity was analyzed by fluorescence staining in this study.The results shows that in vitro cell models,1%vetiver extract decreases cortisol production by 25.8%and increases beta-endorphin secretion by 287.9%when the calcium influx induced by TRPV1 activation is blocked and the inhibitory rate is 22.9%.And 2%vetiver extract decreases the levels of NO,TNF-αand IL-6 when the inhibition rates are 86.3%,69.4%and 81.8%,respectively.Therefore,vetiver extract can effectively combat skin stress,relieve skin discomfort caused by inflammation and nerve sensitivity,thus providing a feeling of well-being.The vetiver extract has skincare benefits at the neurological level which shows potential for neuro-cosmetic application.
基金supported by the National Natural Science Foundation of China(No.52403035)the Shanghai Sailing Program(23YF1400300)+1 种基金the Fundamental Research Funds for the Central Universities(2232023D-05)the Weiqiao Teaching and Research Innovation Program.
文摘The lack of macro-continuity and mechanical strength of covalent organic frameworks(COFs)has significantly limited their practical applications.Here,we propose an“alcohol-triggered defect cleavage”strategy to precisely regulate the growth and stacking of COF grains through a moderate reversed Schiff base reaction,realizing the direct synthesis of COF nanofibers(CNFs)with high aspect ratio(L/D=103.05)and long length(>20μm).An individual CNF exhibits a biomimetic scale-like architecture,achieving superior flexibility and fatigue resistance under dynamic bending via a multiscale stress dissipation mechanism.Taking advantages of these structural features,we engineer CNF aerogels(CNF-As)with programmable porous structures(e.g.,honeycomb,lamellar,isotropic)via directional ice-template methodology.CNF-As demonstrate 100%COF content,high specific surface area(396.15 m^(2)g^(-1))and superelasticity(~0%elastic deformation after 500 compression cycles at 50%strain),outperforming most COF-based counterparts.Compared with the conventional COF aerogels,the unique structural features of CNF-A enable it to perform outstandingly in uranium extraction,with an 11.72-fold increment in adsorption capacity(920.12 mg g^(-1))and adsorption rate(89.9%),and a 2.48-fold improvement in selectivity(U/V=2.31).This study provides a direct strategy for the development of next-generation COF materials with outstanding functionality and structural robustness.
文摘N,N,N',N'-tetraoctyl diglycolamide(TODGA)is a potential extractant for the co-extraction of lanthanides and actinides in high-level liquid waste.In this study,the radiolysis and extraction properties of TODGA in kerosene solvents contacted with the aqueous phase of varying HNO_(3) concentrations were systematically investigated,and the complexation mechanism was analyzed in conjunction with density functional theory(DFT)calculations.After γ-irradiation,the variation of TODGA concentration was detected,and the variation trends in the relative content of radiolysis products(RPs)with sample type and absorbed dose were demonstrated.Results indicated that the breaking of the amide bond,ether bond,and C_(amide)-C_(ether)bond was the primary radiolysis routes.The aqueous-phase precipitate was studied as a potential new mode of TODGA radiolysis in ultrapure water aqueous phase.Moreover,TODGA/kerosene exhibited excellent extraction capabilities for lanthanides even after absorbing 100 kGy,and HNO_(3) can maintain a portion of TODGA's extraction capacity.The DFT method was applied to calculate and evaluate the complexing ability of TODGA and some of its RPs toward lanthanides.The results revealed that the complexing ability of TODGA for Ce(Ⅲ),Eu(Ⅲ),and Dy(Ⅲ)was enhanced successively,and the complexing ability of the RPs with intact oxygen-containing structures could not be neglected.
基金Dept of Science and Technology,Govt.of India,DST/SEED/SCSP/STI/2019/253.
文摘Chamaedorea seifrizii is a bamboo plant that is mainly used for its air-purifying properties and ornamental value.Due to the scarcity of reports on its phytochemical constitutes,this study was aimed at chemical profiling,phytochemical analysis and evaluation of its in-vitro biological activities of acetone extracts of auxiliary inflorescence and fruits of Chamaedorea seifrizii accompanied by in-silico analysis.Standard techniques were employed for phytochemical screening of phenolics,flavonoids and tannins and anti-oxidant and anti-inflammatory tests.In-silico analysis coupled with molecular dynamics simulation was also conducted to find out interaction of some components to inflammatory responses.Bioactive compounds in auxiliary inflorescence and fruit extracts were studied using a gas chromatography-flame ionization detector(GC-FID).Numerous antioxidant tests were carried out,including those for 2,2-diphenyl-1-picrylhydrazyl(DPPH),hydroxyl radicals,and nitric oxide radicals and shown that all both extracts depicted exorbitant levels of activities with values ranging from 48 to 96%.Results of GC-FID revealed maximum 18-22 constituents in acetone fractions with phenethyl cinnamate and hinokione as predominant components in auxiliary inflorescence and fruits,respectively.In addition,a strong anti-inflammatory activity was observed with acetone containing extracts.In-silico analysis validated the interaction of phytocomponents to inflammation initiation enzymes.Phytochemicals found in Chamaedorea seifrizii extracts may have pharmacological,antioxidant and anti-inflammatory properties.Chamaedorea seifrizii may be used in this study to produce new herbal remedies for a range of illnesses,perhaps resulting in the development of novel drugs.
文摘Peony root bark extract as was used the research object,and used a series of biochemical and cellular experiments to investigate its whitening,anti-inflammatory,oil control,acne,and inhibition of the growth of Malassezia.The results showed that the inhibition rate of melanin synthesis was significantly increased to 86.43%at a concentration of 2.0%;the secretion of inflammatory factors IL-1αand IL-6 by macrophages(RAW264.7)was significantly reduced to 4.94 pg/mL and 6.42 pg/mL,respectively;the fluorescence signal of Nile red in sebaceous gland cells(SZ95)was significantly reduced to 57.5%;the inhibition rate of Propionibacterium acnes was 37.7%for 20 min of action;and the average inhibition rate of Malassezia marcescens was 78.1%for 20 min of action.Thus,it can be seen that the peony root bark extract has multiple skin-care effects and is a natural and healthy cosmetic plant raw material,which provides a solid theoretical basis for its application in cosmetics.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
基金supported by the National Natural Science Foundation of China(Grant No.42130312)。
文摘The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.
基金supported by the National Natural Science Foundation of China grant(Nos.22305253,22125504,U25A20570 and T2441002)Strategic Priority Research Program of the Chinese Academy of Sciences grant XDB0520202Beijing National Laboratory for Molecular Sciences(No.BNLMS-CXXM-202402)。
文摘Thermoelectric(TE)materials,which are capable of direct conversion between heat and electricity,offer a promising solution for sustainable energy harvesting.Conjugated polymers have emerged as compelling candidates for flexible TE devices owing to their intrinsic flexibility,low cost,and low thermal conductivity.The performance of polymer-based organic thermoelectrics(OTEs)is profoundly influenced by the processing methods,which dictate molecular packing,crystallinity,and film morphology.This review systematically summarizes recent advances in polymer processing techniques for TE applications,including solution processing,patterning techniques,and large-area fabrication.We discuss the interrelationships among processing techniques,polymer microstructure,and TE performance,concluding with the current challenges and future perspectives for industrializing high-performance OTE devices.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFB3710805).
文摘Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.
基金support from National Natural Science Foundation of China(Grant No.51874033)to Prof.Hai-Yan Tang.
文摘In view of the frequent deterioration of molten steel quality during the tundish filling process,the slag-steel-air interface behavior in a tundish,including liquid level fluctuation,slag eyes,slag entrapment and air suction during the steady-state casting and filling process,was comparatively studied through physical modeling and mathematical simulation methods.During the filling process,the liquid surface forms a large-size slag eye under the impact of molten steel from a ladle shroud,which simultaneously results in a violent fluctuation of liquid level.Concurrently,the liquid flow entrains the air phase and the cover slag into the tundish impact zone,resulting in slag entrapment and air suction.At filling flow rates of 1.5Q,2.0Q,and 2.5Q(Q is the flow rate under steady-state casting),the amount of slag entrapped is 8.39×10^(-5),9.65×10^(-5),and 12.7×10^(-5)m^(3),respectively,while the volume of air aspirated is 0.84×10^(-4),1.47×10^(-4),and 2.01×10^(-4)m^(3),indicating that slag entrapment and air suction intensify with an increase in tundish filling flow rate.Flow field characterization identifies eddy currents in the impact zone as the primary driver of the above phenomena.Proper filling process parameters were proposed to improve the steel quality during the tundish filling.
基金supported by the Youth Talent Project of China Nuclear Power Engineering Co.,Ltd.(KY24045).
文摘While nuclear energy represents a low-carbon and high-efficiency energy source that plays a vital role in the global energy mix,the limitations of spent fuel reprocessing technology pose a major challenge to its sustainable development.The PUREX(plutonium uranium redox extraction)process is currently the dominant nuclear fuel reprocessing technology in the world.However,the key extractant in this process is tributyl phosphate(TBP),which degrades under intense radiation,high temperatures,and strong acidity.This leads to the production of dibutyl phosphate,monobutyl phosphate,and other degradation byproducts,which may reduce the extraction efficiency and trigger third-phase formation and equipment corrosion.This paper systematically reviews the degradation mechanisms of TBP and its diluents,the analytical technique suitable for characterizing degradation products,and the impact of degradation products on the post-treatment process.Additionally,optimization strategies employed for suppressing third-phase formation are discussed.This study offers a theoretical foundation and technical insights in optimizing the PUREX process and ensuring the safe operation of the post-treatment process.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金Supported by Scientific Research Fund Project of Yunnan Provincial Department of Education(2025J1950).
文摘Against the backdrop of integrated development between technical education and higher vocational education,the teaching of Chinese Medicine Processing Technology courses faces new opportunities and challenges.This paper analyzes the existing problems in the current teaching of Chinese Medicine Processing Technology courses,discusses the necessity of reforming the teaching model under the context of integration,and proposes the construction of a"Dual-Capability Progression,Six-Dimensional Empowerment"teaching model.The aim is to enhance the teaching quality of Chinese Medicine Processing Technology courses and cultivate high-quality skilled talents in Chinese medicine processing who can meet industry demands.
基金supported by the National Natural Science Foundation of China(Nos.U22A20241 and 21876105)Shaanxi“Scientist&Engineer”Team(No.2023KXJ-131)Xianyang Key S&T Special Projects(No.L2023-ZDKJ-QCY-SXGG-GY-007).
文摘Electrocatalytic oxidation is a promising technology for wastewater treatment,but poor mass transfer and low current efficiency impaded its engineering applications.To address these issues,researchers have developed flow-through electrochemical reactors(FERs)primarily based on porous electrodes,where the pore structure significantly impacts the electrochemical reaction.Therefore,this study systematically investigated the impact of different pore sizes on the fluid dynamics,current potential distribution,mass transfer processes,and degradation performance of FERs.Computational Fluid Dynamics(CFD)results indicated that smaller pore sizes(10μm,30μm,and 60μm)significantly enhanced convective effects within the fluid,reduced short fluid paths and dead volume regions within the microchannels,and facilitated mass transfer processes.Additionally,smaller pore sizes were conducive to a uniform distribution of current density.Furthermore,Fe(CN)_(6)^(4−)oxidation experiments revealed that the current density at a pore size of 160μm was notably lower than that at 10μm,indicating slower mass transfer of Fe(CN)_(6)^(4−)within larger channels.Calculations based on experimental results demonstrated that the mass transfer rate at a pore size of 10μm was six times than that at 160μm,further confirming the enhancing effect of smaller pore sizes on the mass transfer process.Lastly,experiments on tetracycline degradation showed that at a residence time of 90 s,the removal efficiencies of tetracycline were 80%and 39.1%for porous electrodes with pore sizes of 10μm and 160μm,respectively,demonstrating the superior removal efficiency of smaller pore sizes for tetracycline degradation.
文摘[Objectives]To investigate the optimal extraction conditions for anthocyanins from defatted Lycium ruthenicum Murray using ultrasonic-assisted solvent extraction.[Methods]Anthocyanins were extracted from wild L.ruthenicum in Qinghai Province using ultrasonic-assisted ethanol extraction.Through single-factor and orthogonal experiments,the optimal extraction conditions were determined as follows:temperature 50℃,solid-liquid ratio 1:15(g/mL),ethanol concentration 60%(v/v),and ultrasonic extraction time 25 min.Under these conditions,the anthocyanin content of L.ruthenicum was quantified by UV-Vis spectrophotometry at 280 nm.[Results]The extraction yield of anthocyanins from wild Qinghai L.ruthenicum was 17.0 mg/g,which is superior to the yield of 10.0 mg/g obtained by water solvent extraction,representing a 0.7%increase in extraction rate.The anthocyanin content in L.ruthenicum from different regions was determined,revealing that samples from the Chaidamu area in Qinghai had the highest content(17.3 mg/g),while samples from the Gansu area had the lowest(12.0 mg/g).[Conclusions]Ultrasonic-assisted ethanol extraction technology offers advantages including rapid operation,low energy consumption,high extraction yield,simple detection,and safety.
基金support from the National Key Research and Development Program of China(2022YFC2106300)the National Natural Science Foundation of China(42177400).
文摘To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.
基金supported by theUniversitasNegeri Semarang throughDPAUNNES 2024The grant number is No.271.26.2/UN37/PPK.10/2024.
文摘Bio-oil is a renewable fuel that can be obtained from biomass waste,such as empty palm fruit bunches,sugarcane bagasse,and rice husks.Within a biorefinery framework,bio-oil had not met the standards as a fuel due to the presence of impurities like corrosive phenol.Therefore,the separation of phenol from bio-oil is essential and can be achieved using the extraction method.In this study,biomass wastes(empty fruit bunches of oil palm,sugarcane bagasse,and rice husk)were pyrolyzed in a biorefinery framework to produce bio-oil,which was then refined through liquid-liquid extraction with a methanol-chloroform and ethyl acetate solvents to remove its phenolic compound.The extraction with methanol-chloroform solvent was carried out for 1 h at 50℃.Meanwhile,extraction with ethyl acetate solvent was carried out for 3 h at 70℃.Both extractions used the same variations,i.e.,bio-oil:solvent ratio at 1:1,1:2,1:3,and 1:4,and stirring speeds of 150 rpm,200 rpm,250 rpm,and 300 rpm.The bio-oil obtained from this study contained complex chemical compounds and had characteristics such as a pH of 5,a density of 1.116 g/mL,and a viscosity of 29.57 cSt.Theoptimization results using response surface methodology(RSM)showed that the best yield formethanolchloroform was 72.98%at a stirring speed of 250 rpm and a ratio of 1:3.As for ethyl acetate solvent,the highest yield obtained was 71.78%at a stirring speed of 237.145 rpm and a ratio of 1:2.
基金financially supported by the National Natural Science Foundation of China(52204309,52174277 and 52374300)Fundamental Funds for the Central Universities(N2425026)Liaoning Province Science and Technology Plan Joint Fund(2023-MSBA-052)。
文摘The current vanadium extraction process from sodium roasted vanadium slag poses risks such as ammonia pollution.This study proposes a novel calcium-based vanadium extraction and hydrolysis precipitation process,achieving clean and efficient vanadium recovery.The introduction of Ca O facilitates the targeted reconstruction and conversion of vanadium and calcium in the solution,forming acidsoluble calcium vanadate intermediates.Under optimal conditions,n(Ca)/n(V)ratio of 1.75,extraction temperature of 90℃,and extraction time of 90 min,the vanadium extraction ratio reached 99.83%.This process also separates vanadium from sodium and silicon,enabling one-step purification of the vanadium solution.Subsequent sulfuric acid leaching,conducted at p H of 4.0,90℃,and 60 min,achieved a vanadium leaching ratio of 99.72%,further separating vanadium from calcium and other impurities.Finally,the purified vanadium solution underwent hydrolysis precipitation at p H of 2.1 and 95℃for60 min,achieving a precipitation ratio of 98.69%.The calcined product yielded V_(2)O_(5) with a purity of 98.60%.Compared to the conventional sodium roasting—water leaching along with ammonium salt precipitation process,this innovative method eliminates ammonia-nitrogen wastewater emissions.This study provides a foundation for the development of new vanadium extraction technologies from vanadium slag.
