Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it po...Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.展开更多
The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation o...The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation of the exterior?wall is a more feasible design to satisfy the energy efficiency of buildings in the?zone. However, the systematic research is urgently needed for the self-insulation of the exterior wall in the hot summer and cold winter zone of China. The paper tested the thermal performance of the common non-clay materials such as shale sintered hollow brick, sand autoclaved aerated concrete block, etc. by means of indoor experiments. The energy efficiency effect of the common materials was verified using dynamic calculation soft PKPM and several constitutions of exterior wall with different main bricks and insulation materials on the heat bridge were simulated, too. Besides, the tests of the thermal performance of exterior wall in real constructions were carried out to testify the practical effect of the recommended constitutions of exterior wall with different main bricks and insulation materials on the heat bridge. The conclusions are: the physical and thermal properties of the six non-clay wall material are better than the clay porous brick;the thermal performance of the non-clay brick can be improved obviously through the rational arrangement of the holes;shale sintered hollow brick after increasing the holes and rationalizing the hole arrangement and sand autoclaved aerated concrete block are recommended for buildings in the hot summer and cold winter area of China. The dynamic calculation results show that the thermal performances?of the non-clay materials are all satisfied with the energy efficiency;The heat transfer coefficient of the exterior wall with composition?③,?in which?the main wall was sand autoclaved aerated concrete block and the material on the heat bridge was sand autoclaved aerated concrete plate, is the smallest among the three recommended compositions.展开更多
In this paper, the motion and acceleration process, as well as the mechanism of a high speed and long run landslide are investigated by adopting high speed ring shear test and taking the landslide occurred at Yigong R...In this paper, the motion and acceleration process, as well as the mechanism of a high speed and long run landslide are investigated by adopting high speed ring shear test and taking the landslide occurred at Yigong River in Bomi, Tibet on April 9, 2000 as the background. According to the motion characteristics of high-speed and long distance motion landside, the mechanism is studied under different conditions such as shear speed, consolidated drained and consolidated undrained status. Results show that high speed shearing process hinders and delays the dissipation of pore pressure, and drives pore water migrating to shear zone slowly. Both of water content and fine particle content at shear zone are obviously higher than those in other layers; and soil liquefaction occurs at shear zone in the saturated consolidated undrained ring shear tests. The effective internal friction angle of the consolidated undrained soil is much lower than that of the consolidated drained soil under ring shearing. The results also indicate that the shearing speed affecting the strength of soil to some extent. The higher the ring shearing speed is, the lower the strength of soil is. This investigation provides a preliminary interpretation of the mechanism of the motion and acceleration process of the Yigong landslide, occurred in Tibet in 2000.展开更多
Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and ...Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained, Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.展开更多
Building buffer zone space is not only one of essential approaches for better mental quality of interior building space, but also an important factor that may influence interior thermal comfort and energy consumption....Building buffer zone space is not only one of essential approaches for better mental quality of interior building space, but also an important factor that may influence interior thermal comfort and energy consumption. This study aims to analyze regulative advantages of buffer zone to the surrounding functional spaces. Based on a fieldwork test in a typical office building in cold climate zone in Beijing,China,the monitor data show interior physical performance in the Winter. The research selects two types of different buffer zones in the same building. One is a south-faced greenhouse which has large dimension with plenty of vegetation,and the other is a simple atrium in the middle of five floor building with mount of skylights. The factors and their influence to surrounding functional spaces and the whole building are found out from the comparisons of collected data by floor to floor monitor test on both buffer zones at the same time. The comparisons of two types of buffer zones conclude that the greenhouse is more effective to air quality regulation but not so clearly wellperformed to thermal buffering as expected due to the dominate active central heating in the Winter. This fieldwork test results for building performance can be helpful for both architects and engineers in the early phase of sustainable design.展开更多
A smartphone warning system is a feasible option to notify motorists about a safety threat and/or pedestrian crossings ahead. In this paper, a smartphone-based warning system was proposed to enhance workers’ safety i...A smartphone warning system is a feasible option to notify motorists about a safety threat and/or pedestrian crossings ahead. In this paper, a smartphone-based warning system was proposed to enhance workers’ safety in work zones. Three different warning message systems, including sound, male voice and female voice, were designed to alert drivers. Twenty-four subjects were recruited for a total of ninety-six rounds driving simulator test in a work zone to investigate the impacts of smartphone-based warning messages on subjects’ driving performance, in terms of driving speed, speed variation, acceleration, and brake reaction distance. The outcome showed that, with the assistance of the sound and voice (either female or male) warning messages, drivers could effectively reduce their accelerations and speeds. Meanwhile, such a warning system can induce subjects to shorten their brake reaction distances for worker crossings. All participants found that this warning system is applicable to enhance their defensive driving behaviors while driving through a work zone.展开更多
A statistical analysis is done to study the spatio-temporai features of earthquake activity in the Tianshan seismic belt triggered by tide, based on Schuster＇s test. The data we choose is the ML ≥2. 0 earthquakes fr...A statistical analysis is done to study the spatio-temporai features of earthquake activity in the Tianshan seismic belt triggered by tide, based on Schuster＇s test. The data we choose is the ML ≥2. 0 earthquakes from January 1, 2010 to August 31, 2012 in eastern Tianshan, and the calculation is on tidal body stress. The results show that the p-value based on the time window smoothing of Schuster＇s test corresponds better with the strong earthquakes in the Tianshan seismic belt, especially for a long time before the November 1, 2011 Nilka Ms6. 0 earthquake, when the p-value of the Schuster＇s test was always lower than the threshold of 0. 05 for tidal trigger of earthquake, but after the Niika Ms6. 0 earthquake, that value was quickly restored to a high level, which reflects a close relationship between the Nilka Ms6. 0 earthquake and the Earth tide. According to the p-value based on the spatial window smoothing of Schuster＇s test, the Nilka Ms6. 0 earthquake was at or near the tidal triggering area. Thus we can see from the spatio-temporal results that the Nilka Ms6. 0 earthquake was obviously triggered by Earth fide.展开更多
A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns ...A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns in the upper crust are interpreted as a series of folds and thrusts, and bivergent reflections in the lower crust may represent a convergence between the Indian and the Eurasian plates.展开更多
文摘Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.
文摘The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation of the exterior?wall is a more feasible design to satisfy the energy efficiency of buildings in the?zone. However, the systematic research is urgently needed for the self-insulation of the exterior wall in the hot summer and cold winter zone of China. The paper tested the thermal performance of the common non-clay materials such as shale sintered hollow brick, sand autoclaved aerated concrete block, etc. by means of indoor experiments. The energy efficiency effect of the common materials was verified using dynamic calculation soft PKPM and several constitutions of exterior wall with different main bricks and insulation materials on the heat bridge were simulated, too. Besides, the tests of the thermal performance of exterior wall in real constructions were carried out to testify the practical effect of the recommended constitutions of exterior wall with different main bricks and insulation materials on the heat bridge. The conclusions are: the physical and thermal properties of the six non-clay wall material are better than the clay porous brick;the thermal performance of the non-clay brick can be improved obviously through the rational arrangement of the holes;shale sintered hollow brick after increasing the holes and rationalizing the hole arrangement and sand autoclaved aerated concrete block are recommended for buildings in the hot summer and cold winter area of China. The dynamic calculation results show that the thermal performances?of the non-clay materials are all satisfied with the energy efficiency;The heat transfer coefficient of the exterior wall with composition?③,?in which?the main wall was sand autoclaved aerated concrete block and the material on the heat bridge was sand autoclaved aerated concrete plate, is the smallest among the three recommended compositions.
基金financial aided by the National Basic Research Program of China (2012CB026103)the National Natural Science Foundation of China (Grant Nos. 41172283, 41372313)
文摘In this paper, the motion and acceleration process, as well as the mechanism of a high speed and long run landslide are investigated by adopting high speed ring shear test and taking the landslide occurred at Yigong River in Bomi, Tibet on April 9, 2000 as the background. According to the motion characteristics of high-speed and long distance motion landside, the mechanism is studied under different conditions such as shear speed, consolidated drained and consolidated undrained status. Results show that high speed shearing process hinders and delays the dissipation of pore pressure, and drives pore water migrating to shear zone slowly. Both of water content and fine particle content at shear zone are obviously higher than those in other layers; and soil liquefaction occurs at shear zone in the saturated consolidated undrained ring shear tests. The effective internal friction angle of the consolidated undrained soil is much lower than that of the consolidated drained soil under ring shearing. The results also indicate that the shearing speed affecting the strength of soil to some extent. The higher the ring shearing speed is, the lower the strength of soil is. This investigation provides a preliminary interpretation of the mechanism of the motion and acceleration process of the Yigong landslide, occurred in Tibet in 2000.
基金the Chinese Academy of Sciences (No.KJCX2-YW-M04) the National Science Foundationof China (Nos.10432050, 10672163 and 10721202).
文摘Peel test measurements and simulations of the interfacial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation. A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90, 135 and 180 degrees are considered. Two types of epoxy adhesives are adopted to obtain both strong and weak interface adhesions. A finite element model with cohesive zone elements is used to identify the interfacial parameters and simulate the peel test process. By simulating and recording normal stress near the crack tip, the separation strength is obtained, Furthermore, the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result. It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.
基金Sponsored by the Key Project of National Natural Science Foundation of China(Grant No.51138004)the National Science and Technology Support Program(Grant No.2012BAJ10B02)
文摘Building buffer zone space is not only one of essential approaches for better mental quality of interior building space, but also an important factor that may influence interior thermal comfort and energy consumption. This study aims to analyze regulative advantages of buffer zone to the surrounding functional spaces. Based on a fieldwork test in a typical office building in cold climate zone in Beijing,China,the monitor data show interior physical performance in the Winter. The research selects two types of different buffer zones in the same building. One is a south-faced greenhouse which has large dimension with plenty of vegetation,and the other is a simple atrium in the middle of five floor building with mount of skylights. The factors and their influence to surrounding functional spaces and the whole building are found out from the comparisons of collected data by floor to floor monitor test on both buffer zones at the same time. The comparisons of two types of buffer zones conclude that the greenhouse is more effective to air quality regulation but not so clearly wellperformed to thermal buffering as expected due to the dominate active central heating in the Winter. This fieldwork test results for building performance can be helpful for both architects and engineers in the early phase of sustainable design.
文摘A smartphone warning system is a feasible option to notify motorists about a safety threat and/or pedestrian crossings ahead. In this paper, a smartphone-based warning system was proposed to enhance workers’ safety in work zones. Three different warning message systems, including sound, male voice and female voice, were designed to alert drivers. Twenty-four subjects were recruited for a total of ninety-six rounds driving simulator test in a work zone to investigate the impacts of smartphone-based warning messages on subjects’ driving performance, in terms of driving speed, speed variation, acceleration, and brake reaction distance. The outcome showed that, with the assistance of the sound and voice (either female or male) warning messages, drivers could effectively reduce their accelerations and speeds. Meanwhile, such a warning system can induce subjects to shorten their brake reaction distances for worker crossings. All participants found that this warning system is applicable to enhance their defensive driving behaviors while driving through a work zone.
基金jointly sponsored by the Earthquake Situation Tracking Task of China Earthquake Administration(2013020119)the Earthquake Science Foundation of the Youth of Earthquake Administration of Xinjiang Uygur Autonomous Region,China(201304)
文摘A statistical analysis is done to study the spatio-temporai features of earthquake activity in the Tianshan seismic belt triggered by tide, based on Schuster＇s test. The data we choose is the ML ≥2. 0 earthquakes from January 1, 2010 to August 31, 2012 in eastern Tianshan, and the calculation is on tidal body stress. The results show that the p-value based on the time window smoothing of Schuster＇s test corresponds better with the strong earthquakes in the Tianshan seismic belt, especially for a long time before the November 1, 2011 Nilka Ms6. 0 earthquake, when the p-value of the Schuster＇s test was always lower than the threshold of 0. 05 for tidal trigger of earthquake, but after the Niika Ms6. 0 earthquake, that value was quickly restored to a high level, which reflects a close relationship between the Nilka Ms6. 0 earthquake and the Earth tide. According to the p-value based on the spatial window smoothing of Schuster＇s test, the Nilka Ms6. 0 earthquake was at or near the tidal triggering area. Thus we can see from the spatio-temporal results that the Nilka Ms6. 0 earthquake was obviously triggered by Earth fide.
基金supported by the National Natural Science Foundation of China (Nos. 40830316, 40874045 and 40704016)the Ministry of Science and Technology of China (Nos. SinoProbe-02, 2006DFA21340)+1 种基金the Ministry of Land and Resources of China (Nos. 2004-06, 200811021)the Open Fund of Key Laboratory of Geo-detection of China Uni-versity of Geosciences (Beijing) (No. GDL0603)
文摘A test of deep seismic reflection profiling across the central uplift or metamorphic belt of the Qiangtang （羌塘） terrane, Tibet plateau, provides a first image of the crustal structure. Complex reflection patterns in the upper crust are interpreted as a series of folds and thrusts, and bivergent reflections in the lower crust may represent a convergence between the Indian and the Eurasian plates.
