The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrai...The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.展开更多
Accurate digital terrain models(DTMs)are essential for a wide range of geospatial and environmental applications,yet their derivation in forested regions remains a significant challenge.Existing global DTMs,typically ...Accurate digital terrain models(DTMs)are essential for a wide range of geospatial and environmental applications,yet their derivation in forested regions remains a significant challenge.Existing global DTMs,typically generated from satellite stereo photogrammetry or interferometric synthetic aperture radar(InSAR),fail to accurately capture understory terrain due to limited penetration capabilities,resulting in elevation overestimation in densely vegetated areas.While airborne light detection and ranging(LiDAR)can provide high-accuracy DTMs,its limited spatial coverage and high acquisition cost hinder large-scale applications.Thus,there is an urgent need for a scalable and cost-effective approach to extract DTMs directly from satellite-derived digital surface models(DSMs).In this study,we propose a simple,interpretable understory terrain extraction method that utilizes canopy height data from Global Ecosystem Dynamics Investigation(GEDI)and Ice,Cloud,and Land Elevation Satellite-2(ICESat-2)to construct a tree height surface model,which is then subtracted from the stereo-derived DSM to generate the final DTM.By directly incorporating LiDAR constraints,the method avoids error propagation from multiple heterogeneous datasets and reduces reliance on ancillary inputs,ensuring ease of implementation and broad applicability.In contrast to machine learning-based terrain modeling methods,which are often prone to overfitting and data bias,the proposed approach is simple,interpretable,and robust across diverse forested landscapes.The accuracy of the resulting DTM was validated against airborne LiDAR reference data and compared with both the Copernicus Digital Elevation Model(DEM)and the forest and buildings removed DEM(FABDEM),a global bare-earth elevation model corrected for vegetation bias.The results indicate that the proposed DTM consistently outperforms the Copernicus DEM(CopDEM)and achieves accuracy comparable to FABDEM.In addition,its finer spatial resolution of 1 m,compared to the 30 m resolution of FABDEM,allows for more detailed terrain representation and better capture of fine-scale variation.This advantage is most pronounced in gently to moderately sloped areas,where the proposed DTM shows clearly higher accuracy than both the CopDEM and FABDEM.The results confirm that high-resolution DTMs can be effectively extracted from DSMs using spaceborne LiDAR constraints,offering a scalable solution for terrain modeling in forested environments where airborne LiDAR is unavailable.To illustrate the potential utility of the proposed DTM,we applied it to a fire risk mapping application based on topographic parameters such as slope,aspect,and elevation.This case highlights how improved terrain representation can support geospatial hazard assessments.展开更多
Selecting the optimal model helps decision-makers to reduce the uncertainty in the slope calculation process.The uncertainty quantification process using root-mean-square error(RMSE)has limitations.It can obscure loca...Selecting the optimal model helps decision-makers to reduce the uncertainty in the slope calculation process.The uncertainty quantification process using root-mean-square error(RMSE)has limitations.It can obscure local uncertainty features and neglect the statistical characteristics of uncertainty,which may hinder decision-makers'understanding and model selection.展开更多
In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different typ...In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different types of terrain. In this paper, an algorithm to generate random terrain data is given.展开更多
National policies and legal decisions are very much dependent on the position of the shoreline. Shoreline change rates are frequently employed to summarize historical shoreline movements. This also helps to predict th...National policies and legal decisions are very much dependent on the position of the shoreline. Shoreline change rates are frequently employed to summarize historical shoreline movements. This also helps to predict the future position of the shoreline based on the perceived historical trends. In this regard, the future shoreline positions at both the long-term, that is 2050, and short-term, that is 2015, time interval was predicted using the End Point Rate （EPR） model along the Junput Coast of West Bengal, India. The whole project work was divided into five parts. The first part showed the detection of shoreline from satellite data like IRS LISS IV and Landsat 7 ETM＋ and from the Survey of India Toposheet. The second part gave the glimpse of the dynamic segmentation of the shoreline to get the dynamically segmented nodal points along the shoreline. Shoreline prediction for the years 2015 and 2050 using End Point Rate （EPR） model was done in the third part. In the fourth part, Coastal Terrain Model （CTM） was prepared, and the digital shoreline estimated. The model result was validated and accuracy assessed with respect to the GPS data collected from the field at the fifth stage. Finally at the end of the present work, limitations of the project and the future scope of the work was sited.展开更多
Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of eleva...Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.展开更多
Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approache...Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approaches which employ various types of data sets for DEM production are proposed： （1） Method of weighted sum of different data sources with morphological enhancement that conflates any additional data sources to principal DEM, and （2） DEM updating methods of modeling absolute and relative temporal changes, considering landslides, earthquakes, quarries, watererosion, building and highway constructions, etc. Spatial modeling of environmental variables concerning both approaches for （a） quality control of data sources, considering regions, （b） pre-processing of data sources, and （c） processing of the final DEM, have been applied. The variables are called rate of karst, morphologic roughness （modeled from slope, profile curvature and elevation）, characteristic features, rate of forestation, hydrological network, and rate of urbanization. Only the variables evidenced as significant were used in spatial modeling to generate homogeneous regions in spatial modeling a-c. The production process uses different regions to define high quality conflation of data sources to the final DEM. The methodology had been confirmed by case studies. The result is an overall high quality DEM with various well-known parameters.展开更多
A space-filling curve in 2,3,or higher dimensions can be thought as a path of a continuously moving point.As its main goal is to preserve spatial proximity,this type of curves has been widely used in the design and im...A space-filling curve in 2,3,or higher dimensions can be thought as a path of a continuously moving point.As its main goal is to preserve spatial proximity,this type of curves has been widely used in the design and implementation of spatial data structures and nearest neighbor-finding techniques.This paper is essentially focused on the efficient representation of Digital Ele-vation Models(DEM) that entirely fit into the main memory.We propose a new hierarchical quadtree-like data structure to be built over domains of unrestricted size,and a representation of a quadtree and a binary triangles tree by means of the Hilbert and the Sierpinski space-filling curves,respectively,taking into account the hierarchical nature and the clustering properties of this kind of curves.Some triangulation schemes are described for the space-filling-curves-based approaches to efficiently visualize multiresolu-tion surfaces.展开更多
The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital imag...The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital image scanned in a cycle as the raw data.First the label rings are detected with the improved Hough transform (HT) method and followed by curve-fitting for accurate location;then the most probable window for each ping is detected with weighted neighborhood gray-level co-occurrence matrix;and finally the DTM is built by integrating the GPS data with sonar data for 3D visualization.The case of an underwater trench for immersed tube road tunnel is illustrated.展开更多
Geomorphometric modeling and mapping of Antarctic oases are promising for obtaining new quantitative knowledge about the topography of these unique landscapes and for the further use of morphometric information in Ant...Geomorphometric modeling and mapping of Antarctic oases are promising for obtaining new quantitative knowledge about the topography of these unique landscapes and for the further use of morphometric information in Antarctic research.Within the framework of a project to create a thematic physical-geographical scientific reference geomorphometric atlas of ice-free areas of Antarctica,we performed geomorphometric modeling and mapping of the Bunger Hills(Knox Coast,Wilkes Land,East Antarctica),one of the largest Antarctic oases.By processing a fragment of the Reference Elevation Model of Antarctica(REMA)covering the Bunger Hills and adjacent glaciers,we created,for the first time,a series of 37 medium-to large-scale maps of nine of the most scientifically important morphometric variables(i.e.,slope gradient,slope aspect,vertical curvature,horizontal curvature,maximal curvature,minimal curvature,catchment area,topographic wetness index,and stream power index).The morphometric maps describe the topography of the Bunger Hills in a quantitative,rigorous,and reproducible manner.New morphometric data can be useful for further geological,geomorphological,glaciological,ecological,and hydrological studies of this Antarctic oasis.展开更多
This paper describes the erosion procedure of the natural terrain and deduces the two main physical physical procedures by the hydraulic erosion and thermal weathering. through a large number of iteration calculation ...This paper describes the erosion procedure of the natural terrain and deduces the two main physical physical procedures by the hydraulic erosion and thermal weathering. through a large number of iteration calculation ,the action procedure could be expressed and its realistic graphics could be displayed.展开更多
To solve the inaccuracy problem caused by the two existing methods (averageend-area method and prismoidal method) used for the calculation of roadway earthwork volume, thispaper puts forward a new concept of the 3-dim...To solve the inaccuracy problem caused by the two existing methods (averageend-area method and prismoidal method) used for the calculation of roadway earthwork volume, thispaper puts forward a new concept of the 3-dimensional algorithm that takes all the roadway geometricdesign procedures as a kind of geometrical operation between the ground model (original terrainmodel) and the roadway model (designed model) under certain constraints, and then presents acomplete 3-dimensional algorithm of roadway earthwork volume as well as its executable computerprogram. The algorithm benefits from the re-triangulation technique of constrained delaunaytriangulation (CDT), which can yield a true volume value theoretically. Through a number ofpractical testscovering varied intervals between adjacent cross sections, it is proven to possess ahigher accuracy compared with that of traditional methods. All the work involved in this paperindicates that the 3-dimensional calculation of roadway earthwork volumeis feasible, more accurateand should have further application in practice.展开更多
针对目前各种机载点云滤波算法缺乏详细对比的问题,分别从定性和定量两方面对常用的3种滤波算法进行了对比分析,得出了滤波误差最小的滤波方法,以及各滤波算法对不同地形数据的适应情况。利用国际摄影测量与遥感学会(International Soci...针对目前各种机载点云滤波算法缺乏详细对比的问题,分别从定性和定量两方面对常用的3种滤波算法进行了对比分析,得出了滤波误差最小的滤波方法,以及各滤波算法对不同地形数据的适应情况。利用国际摄影测量与遥感学会(International Society for Photogrammetry and Remote Sensing,ISPRS)提供的标准滤波数据进行实验。结果表明,6组实验数据中,布料模拟滤波算法的总误差都是最小的;对于平坦地形数据,布料模拟滤波算法最合适,对于地形起伏的复杂地形数据,布料模拟滤波算法和渐进三角网滤波算法总误差值接近,但后者的滤波时间更短。展开更多
Geomorphometry, the science of digital terrain analysis （DTA）, is an important focus of research in both geomorphology and geographical information science （GIS）. Given that 70% of China is mountainous, geomorphol...Geomorphometry, the science of digital terrain analysis （DTA）, is an important focus of research in both geomorphology and geographical information science （GIS）. Given that 70% of China is mountainous, geomorphological research is popular among Chinese schol- ars, and the development of GIS over the last 30 years has led to significant advances in geomorphometric research. In this paper, we review Chinese progress in geomorphometry based on the published literature. There are three major areas of progress： digital terrain modelling methods, DTA methods, and applications of digital terrain models （DTMs）. First, traditional vector- and raster-based terrain modelling methods, including the assessment of uncertainty, have received widespread attention. New terrain modelling methods such as unified raster and vector, high-fidelity, and real-time dynamic geographical scene modelling have also attracted research attention and are now a major focus of digital terrain modelling research. Second, in addition to the popular DTA methods based on topographical derivatives geomorphological features, and hydrological factors extracted from DTMs, DTA methods have been extended to include analyses of the structure of underlying strata, ocean surface features and even socioeconomic spatial structures. Third, DTMs have been applied to fields including global climate change, analysis of various typical regions, lunar surface and other related fields. Clearly, Chinese scholars have made significant progress in geomorphometry. Chinese scholars have had the greatest international impact in areas including high-fidelity digital terrain modelling and DTM-based regional geomorphological analysis, particularly in the Loess Plateau and the Tibetan Plateau regions.展开更多
In this study,short-term gully retreat was monitored from the active gullies selected in representative black soil area,using differential global positioning system(GPS).With the support of geographic information syst...In this study,short-term gully retreat was monitored from the active gullies selected in representative black soil area,using differential global positioning system(GPS).With the support of geographic information system(GIS),multi-temporal digital elevation models(DEM) were constructed from the data collected by GPS and used for further analysis.Based on the analysis of multi-temporal DEM,we discussed the erosion-deposition characteristics within gully and a developing model for black soil gully area of Northeast China was proposed.The results are:(1) The analysis of the monitored gully data in 2004 indicated that the retreat of gully head reached more than 10 m,gully area extended 170-400 m2,net gully eroded volume 220-320 m3,and gully erosion modulus 2200-4800 t?km?2?a?1.(2) Compared with the mature gully the initial gully grows rapidly,and its erosion parameters are relatively large.The erosion parameters have not only to do with flow energy,but also with the growth phase.(3) There are significant seasonal differences in gully erosion parameters.The extension of gully area and width dominates in winter and spring without marked net erosion while changes mainly occur in gully head and net erosion in rainy season.(4) It is remarkable for freeze-thaw erosion in the black soil area of NE China.The gully wall of SG2 extended 0.45 m under freeze-thaw effect in 2004,and the distance of gully head retreated maximally 6.4 m.(5) Due to freeze-thaw action and snowmelt,gully is primarily in the interior adjustment process in winter and early spring.There are much more depositions compared with that during rainy season,which can almost happen throughout the gully,while erosion mostly occurs near head,esp.for gullies having a relatively long history of development.On the other hand,the process of energy exchange with exterior dominates in rainy season.It is considered that this cyclic process is an important mechanism for gully growth in high latitude or/and high attitude regions.展开更多
Applications of remote sensing (RS), global positioning system (GPS), geographic information system (GIS) and combination of three-S techniques in the forest management are introduced. It indicates that, with the quic...Applications of remote sensing (RS), global positioning system (GPS), geographic information system (GIS) and combination of three-S techniques in the forest management are introduced. It indicates that, with the quickly improvement of the computer technique, the three-S system will become a very important part of the forestry management system.展开更多
The estimation of lower atmospheric refractivity from radar sea clutter（RFC） is a complicated nonlinear optimization problem.This paper deals with the RFC problem in a Bayesian framework.It uses the unbiased Markov ...The estimation of lower atmospheric refractivity from radar sea clutter（RFC） is a complicated nonlinear optimization problem.This paper deals with the RFC problem in a Bayesian framework.It uses the unbiased Markov Chain Monte Carlo（MCMC） sampling technique,which can provide accurate posterior probability distributions of the estimated refractivity parameters by using an electromagnetic split-step fast Fourier transform terrain parabolic equation propagation model within a Bayesian inversion framework.In contrast to the global optimization algorithm,the Bayesian-MCMC can obtain not only the approximate solutions,but also the probability distributions of the solutions,that is,uncertainty analyses of solutions.The Bayesian-MCMC algorithm is implemented on the simulation radar sea-clutter data and the real radar seaclutter data.Reference data are assumed to be simulation data and refractivity profiles are obtained using a helicopter.The inversion algorithm is assessed（i） by comparing the estimated refractivity profiles from the assumed simulation and the helicopter sounding data;（ii） the one-dimensional（1D） and two-dimensional（2D） posterior probability distribution of solutions.展开更多
The design of tunnels must be conducted based on the knowledge of the territory. The longer the structure, the larger the area to be investigated, and the greater the number of surveys and tests to be performed in ord...The design of tunnels must be conducted based on the knowledge of the territory. The longer the structure, the larger the area to be investigated, and the greater the number of surveys and tests to be performed in order to thoroughly examine all the relevant features. Therefore, optimization of the investigation process is strongly required to obtain complete and reliable data for the design of the infrastructure. The fast development of remote sensing technologies and the affordability of their products have contributed to proving their benefits as supports for investigation, encouraging the spreading of automatic or semi-automatic methods for regional scale surveys. Similarly, considering the scale of the rock outcrop, photogrammetric and laser scanner techniques are well-established techniques for representing geometrical features of rock masses, and the benefits of non-contact surveys in terms of safety and time consumption are acknowledged. Unfortunately, in most cases, data obtained at different scales of investigations are only partially integrated or compared, probably due to the missing exchange of knowledge among experts of different fields（e.g. geologists and geotechnical engineers）. The authors,after experiencing such a lack of connection among the results of different surveys concerning tunnels,propose a multiscale approach for the optimization of the investigation process, starting from the regional scale, to obtain the data that can be useful not only for planning more detailed surveys in a preliminary phase, but also for making previsions on the discontinuity sets that are present in the rock masses subjected to excavations. A methodological process is proposed and illustrated by means of a case study. Preliminary results are discussed to highlight the potentiality of this method and its limitations.展开更多
An improved topographic database for King George Island,one of the most frequently visited regions in Antarctica,is presented.A first step consisted in combining data from differential GPS surveys gained during the au...An improved topographic database for King George Island,one of the most frequently visited regions in Antarctica,is presented.A first step consisted in combining data from differential GPS surveys gained during the austral summers 1997～1998 and 1999～2000,with the current coastline from a SPOT satellite image mosaic,topographic information from existing maps and from the Antarctic Digital Database.From this data sets,a digital terrain model (DTM) was generated using Arc/Info GIS.In a second step,a satellite image map at the scale 1∶100 000 was assembled from contour lines derived from the DTM and the satellite mosaic.A lack of accurate topographic information in the eastern part of the island was identified.Additional topographic surveying or SAR interferometry should be used to improve the data quality in that area.The GIS integrated database will be indispensable for glaciological and climatological studies and administrative and scientific purposes.In future,the application of GIS techniques will be mandatory for environmental impact studies and environmental monitoring as well as for management plans on King George Island.展开更多
Global geopotential models have not included the very high frequencies of the Earth’s external gravity field.This is called omission error.This omission error becomes more important in mountainous areas(areas with hi...Global geopotential models have not included the very high frequencies of the Earth’s external gravity field.This is called omission error.This omission error becomes more important in mountainous areas(areas with highly variable topography).The work reported here consists in reducing the omission error in measurements of Bouguer gravity anomalies,by refining the global geopotential model EGM2008 using the spectral enhancement method.This method consists in computing the residual terrain effects and then coupling them to the gravimetric signal of the global geopotential model.To compute the residual terrain effects,we used the Residual Terrain Model(RTM)technique.To refine it required a reference surface(ETOPO1)developed up to degree 2190(the maximum degree of the EGM2008 model)and a detailed elevation model(AW3D30).Computation was performed with the TC program of the GRAVSOFT package.The topography of the study area was assumed to have a constant density of 2670 kg/m3.For the inner and outer zones,the respective integration radii of 10 km and 200 km have been chosen.We obtained very important RTM values ranging from−53.59 to 34.79 mGal.These values were added to the gravity anomalies grid of the EGM2008 model to improve accuracy at high frequencies.On a part of the Cameroon Volcanic Line and its surroundings(mountainous area),we made a comparison between the residual Bouguer anomalies before and after refinement.We report differences ranging from−37.40 to 26.40 mGal.We conclude that the impact of omission error on gravimetric signatures is observed especially in areas with high variable topography,such as on the Cameroon Volcanic Line and around the localities of Takamanda,Essu,Dumbo,and Ngambe.This finding illustrates the great influence that topography has on accurate measurement of these gravity anomalies,and thus why topography must be taken into account.We can conclude that in preparing a global geopotential model,a high resolution DTM must be used to decrease the omission error:the degree of expansion has to increase in order to take the higher frequencies into account.The refined Bouguer anomalies grid presented here can be used in addition to terrestrial gravity anomalies in the study area,especially in mountainous areas where gravimetric data are very sparse or nonexistent.展开更多
基金Supported by the National Natural Science Foundation of China （No.40671158）, the National 863 Program of China（No.2006AA12Z224） and the Program for New Century Excellent Talents in University （No.NCET-05-0626）.
文摘The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.
基金supported by the National Key Research and Development Program of China(Nos.SQ2022YFB3900026 and 2022YFB3903305)supported by the Leading Talents of Guangdong Pearl River Talent Program(No.2021CX02S024)the Guangdong S&T programme(No.2024B1212050011).
文摘Accurate digital terrain models(DTMs)are essential for a wide range of geospatial and environmental applications,yet their derivation in forested regions remains a significant challenge.Existing global DTMs,typically generated from satellite stereo photogrammetry or interferometric synthetic aperture radar(InSAR),fail to accurately capture understory terrain due to limited penetration capabilities,resulting in elevation overestimation in densely vegetated areas.While airborne light detection and ranging(LiDAR)can provide high-accuracy DTMs,its limited spatial coverage and high acquisition cost hinder large-scale applications.Thus,there is an urgent need for a scalable and cost-effective approach to extract DTMs directly from satellite-derived digital surface models(DSMs).In this study,we propose a simple,interpretable understory terrain extraction method that utilizes canopy height data from Global Ecosystem Dynamics Investigation(GEDI)and Ice,Cloud,and Land Elevation Satellite-2(ICESat-2)to construct a tree height surface model,which is then subtracted from the stereo-derived DSM to generate the final DTM.By directly incorporating LiDAR constraints,the method avoids error propagation from multiple heterogeneous datasets and reduces reliance on ancillary inputs,ensuring ease of implementation and broad applicability.In contrast to machine learning-based terrain modeling methods,which are often prone to overfitting and data bias,the proposed approach is simple,interpretable,and robust across diverse forested landscapes.The accuracy of the resulting DTM was validated against airborne LiDAR reference data and compared with both the Copernicus Digital Elevation Model(DEM)and the forest and buildings removed DEM(FABDEM),a global bare-earth elevation model corrected for vegetation bias.The results indicate that the proposed DTM consistently outperforms the Copernicus DEM(CopDEM)and achieves accuracy comparable to FABDEM.In addition,its finer spatial resolution of 1 m,compared to the 30 m resolution of FABDEM,allows for more detailed terrain representation and better capture of fine-scale variation.This advantage is most pronounced in gently to moderately sloped areas,where the proposed DTM shows clearly higher accuracy than both the CopDEM and FABDEM.The results confirm that high-resolution DTMs can be effectively extracted from DSMs using spaceborne LiDAR constraints,offering a scalable solution for terrain modeling in forested environments where airborne LiDAR is unavailable.To illustrate the potential utility of the proposed DTM,we applied it to a fire risk mapping application based on topographic parameters such as slope,aspect,and elevation.This case highlights how improved terrain representation can support geospatial hazard assessments.
基金supported by the National Key Research and Development Program of China:Core Technologies and Software Systems of Geospatial Intelligence(Project No.:2021YFB3900900).
文摘Selecting the optimal model helps decision-makers to reduce the uncertainty in the slope calculation process.The uncertainty quantification process using root-mean-square error(RMSE)has limitations.It can obscure local uncertainty features and neglect the statistical characteristics of uncertainty,which may hinder decision-makers'understanding and model selection.
文摘In order to slove a realistic test problem of TF/TA algorithm, it is necessary to make a discrete terrain model. The model has adjustable roughness parameters so as to test the optimization procedure for different types of terrain. In this paper, an algorithm to generate random terrain data is given.
基金Supported by Indian Institute of Remote Sensing (ISRO), India and ITC, the Netherlands
文摘National policies and legal decisions are very much dependent on the position of the shoreline. Shoreline change rates are frequently employed to summarize historical shoreline movements. This also helps to predict the future position of the shoreline based on the perceived historical trends. In this regard, the future shoreline positions at both the long-term, that is 2050, and short-term, that is 2015, time interval was predicted using the End Point Rate （EPR） model along the Junput Coast of West Bengal, India. The whole project work was divided into five parts. The first part showed the detection of shoreline from satellite data like IRS LISS IV and Landsat 7 ETM＋ and from the Survey of India Toposheet. The second part gave the glimpse of the dynamic segmentation of the shoreline to get the dynamically segmented nodal points along the shoreline. Shoreline prediction for the years 2015 and 2050 using End Point Rate （EPR） model was done in the third part. In the fourth part, Coastal Terrain Model （CTM） was prepared, and the digital shoreline estimated. The model result was validated and accuracy assessed with respect to the GPS data collected from the field at the fifth stage. Finally at the end of the present work, limitations of the project and the future scope of the work was sited.
基金Supported by the National Natural Science Foundation of China(61363075)the National High Technology Research and Development Program of China(863 Program)(2012AA12A308)the Yue Qi Young Scholars Program of China University of Mining&Technology,Beijing(800015Z1117)
文摘Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.
文摘Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approaches which employ various types of data sets for DEM production are proposed： （1） Method of weighted sum of different data sources with morphological enhancement that conflates any additional data sources to principal DEM, and （2） DEM updating methods of modeling absolute and relative temporal changes, considering landslides, earthquakes, quarries, watererosion, building and highway constructions, etc. Spatial modeling of environmental variables concerning both approaches for （a） quality control of data sources, considering regions, （b） pre-processing of data sources, and （c） processing of the final DEM, have been applied. The variables are called rate of karst, morphologic roughness （modeled from slope, profile curvature and elevation）, characteristic features, rate of forestation, hydrological network, and rate of urbanization. Only the variables evidenced as significant were used in spatial modeling to generate homogeneous regions in spatial modeling a-c. The production process uses different regions to define high quality conflation of data sources to the final DEM. The methodology had been confirmed by case studies. The result is an overall high quality DEM with various well-known parameters.
基金Supported by the GeneSIG Project, University of Informatics Sciences (UCI), Havana, Cuba
文摘A space-filling curve in 2,3,or higher dimensions can be thought as a path of a continuously moving point.As its main goal is to preserve spatial proximity,this type of curves has been widely used in the design and implementation of spatial data structures and nearest neighbor-finding techniques.This paper is essentially focused on the efficient representation of Digital Ele-vation Models(DEM) that entirely fit into the main memory.We propose a new hierarchical quadtree-like data structure to be built over domains of unrestricted size,and a representation of a quadtree and a binary triangles tree by means of the Hilbert and the Sierpinski space-filling curves,respectively,taking into account the hierarchical nature and the clustering properties of this kind of curves.Some triangulation schemes are described for the space-filling-curves-based approaches to efficiently visualize multiresolu-tion surfaces.
文摘The whole procedures of underwater digital terrain model (DTM) were presented by building with the global positioning system (GPS) aided high-resolution profile-scan sonar images.The algorithm regards the digital image scanned in a cycle as the raw data.First the label rings are detected with the improved Hough transform (HT) method and followed by curve-fitting for accurate location;then the most probable window for each ping is detected with weighted neighborhood gray-level co-occurrence matrix;and finally the DTM is built by integrating the GPS data with sonar data for 3D visualization.The case of an underwater trench for immersed tube road tunnel is illustrated.
文摘Geomorphometric modeling and mapping of Antarctic oases are promising for obtaining new quantitative knowledge about the topography of these unique landscapes and for the further use of morphometric information in Antarctic research.Within the framework of a project to create a thematic physical-geographical scientific reference geomorphometric atlas of ice-free areas of Antarctica,we performed geomorphometric modeling and mapping of the Bunger Hills(Knox Coast,Wilkes Land,East Antarctica),one of the largest Antarctic oases.By processing a fragment of the Reference Elevation Model of Antarctica(REMA)covering the Bunger Hills and adjacent glaciers,we created,for the first time,a series of 37 medium-to large-scale maps of nine of the most scientifically important morphometric variables(i.e.,slope gradient,slope aspect,vertical curvature,horizontal curvature,maximal curvature,minimal curvature,catchment area,topographic wetness index,and stream power index).The morphometric maps describe the topography of the Bunger Hills in a quantitative,rigorous,and reproducible manner.New morphometric data can be useful for further geological,geomorphological,glaciological,ecological,and hydrological studies of this Antarctic oasis.
文摘This paper describes the erosion procedure of the natural terrain and deduces the two main physical physical procedures by the hydraulic erosion and thermal weathering. through a large number of iteration calculation ,the action procedure could be expressed and its realistic graphics could be displayed.
文摘To solve the inaccuracy problem caused by the two existing methods (averageend-area method and prismoidal method) used for the calculation of roadway earthwork volume, thispaper puts forward a new concept of the 3-dimensional algorithm that takes all the roadway geometricdesign procedures as a kind of geometrical operation between the ground model (original terrainmodel) and the roadway model (designed model) under certain constraints, and then presents acomplete 3-dimensional algorithm of roadway earthwork volume as well as its executable computerprogram. The algorithm benefits from the re-triangulation technique of constrained delaunaytriangulation (CDT), which can yield a true volume value theoretically. Through a number ofpractical testscovering varied intervals between adjacent cross sections, it is proven to possess ahigher accuracy compared with that of traditional methods. All the work involved in this paperindicates that the 3-dimensional calculation of roadway earthwork volumeis feasible, more accurateand should have further application in practice.
文摘针对目前各种机载点云滤波算法缺乏详细对比的问题,分别从定性和定量两方面对常用的3种滤波算法进行了对比分析,得出了滤波误差最小的滤波方法,以及各滤波算法对不同地形数据的适应情况。利用国际摄影测量与遥感学会(International Society for Photogrammetry and Remote Sensing,ISPRS)提供的标准滤波数据进行实验。结果表明,6组实验数据中,布料模拟滤波算法的总误差都是最小的;对于平坦地形数据,布料模拟滤波算法最合适,对于地形起伏的复杂地形数据,布料模拟滤波算法和渐进三角网滤波算法总误差值接近,但后者的滤波时间更短。
基金Foundation： National Natural Science Foundation of China, No.41671389, No.41631175, No.41601411, No.41371424 PAPD, No. 164320H 116
文摘Geomorphometry, the science of digital terrain analysis （DTA）, is an important focus of research in both geomorphology and geographical information science （GIS）. Given that 70% of China is mountainous, geomorphological research is popular among Chinese schol- ars, and the development of GIS over the last 30 years has led to significant advances in geomorphometric research. In this paper, we review Chinese progress in geomorphometry based on the published literature. There are three major areas of progress： digital terrain modelling methods, DTA methods, and applications of digital terrain models （DTMs）. First, traditional vector- and raster-based terrain modelling methods, including the assessment of uncertainty, have received widespread attention. New terrain modelling methods such as unified raster and vector, high-fidelity, and real-time dynamic geographical scene modelling have also attracted research attention and are now a major focus of digital terrain modelling research. Second, in addition to the popular DTA methods based on topographical derivatives geomorphological features, and hydrological factors extracted from DTMs, DTA methods have been extended to include analyses of the structure of underlying strata, ocean surface features and even socioeconomic spatial structures. Third, DTMs have been applied to fields including global climate change, analysis of various typical regions, lunar surface and other related fields. Clearly, Chinese scholars have made significant progress in geomorphometry. Chinese scholars have had the greatest international impact in areas including high-fidelity digital terrain modelling and DTM-based regional geomorphological analysis, particularly in the Loess Plateau and the Tibetan Plateau regions.
基金Key Project for National Natural Science Foundation of China,No.40235056The Ph.D. Programs Foundation of Ministry of Education of China, No.20030027015+3 种基金China Postdoctoral Science Foundation,No.20070410482Doctoral Foundation of University of Jinan,No.B0620National Natural Science Foundation of China,No.40672158Key Subject Foundation Supported by Shandong Province
文摘In this study,short-term gully retreat was monitored from the active gullies selected in representative black soil area,using differential global positioning system(GPS).With the support of geographic information system(GIS),multi-temporal digital elevation models(DEM) were constructed from the data collected by GPS and used for further analysis.Based on the analysis of multi-temporal DEM,we discussed the erosion-deposition characteristics within gully and a developing model for black soil gully area of Northeast China was proposed.The results are:(1) The analysis of the monitored gully data in 2004 indicated that the retreat of gully head reached more than 10 m,gully area extended 170-400 m2,net gully eroded volume 220-320 m3,and gully erosion modulus 2200-4800 t?km?2?a?1.(2) Compared with the mature gully the initial gully grows rapidly,and its erosion parameters are relatively large.The erosion parameters have not only to do with flow energy,but also with the growth phase.(3) There are significant seasonal differences in gully erosion parameters.The extension of gully area and width dominates in winter and spring without marked net erosion while changes mainly occur in gully head and net erosion in rainy season.(4) It is remarkable for freeze-thaw erosion in the black soil area of NE China.The gully wall of SG2 extended 0.45 m under freeze-thaw effect in 2004,and the distance of gully head retreated maximally 6.4 m.(5) Due to freeze-thaw action and snowmelt,gully is primarily in the interior adjustment process in winter and early spring.There are much more depositions compared with that during rainy season,which can almost happen throughout the gully,while erosion mostly occurs near head,esp.for gullies having a relatively long history of development.On the other hand,the process of energy exchange with exterior dominates in rainy season.It is considered that this cyclic process is an important mechanism for gully growth in high latitude or/and high attitude regions.
文摘Applications of remote sensing (RS), global positioning system (GPS), geographic information system (GIS) and combination of three-S techniques in the forest management are introduced. It indicates that, with the quickly improvement of the computer technique, the three-S system will become a very important part of the forestry management system.
基金Project supported by the National Natural Science Foundation of China (Grant No. 41105013)the National Natural Science Foundation of Jiangsu Province,China (Grant No. BK2011122)+1 种基金the Open Issue Foundation of Key Laboratory of Meteorological Disaster of Ministry of Education,China (Grant No. KLME1109)the City Meteorological Scientific Research Fund,China (Grant No. IUMKY&UMRF201111)
文摘The estimation of lower atmospheric refractivity from radar sea clutter（RFC） is a complicated nonlinear optimization problem.This paper deals with the RFC problem in a Bayesian framework.It uses the unbiased Markov Chain Monte Carlo（MCMC） sampling technique,which can provide accurate posterior probability distributions of the estimated refractivity parameters by using an electromagnetic split-step fast Fourier transform terrain parabolic equation propagation model within a Bayesian inversion framework.In contrast to the global optimization algorithm,the Bayesian-MCMC can obtain not only the approximate solutions,but also the probability distributions of the solutions,that is,uncertainty analyses of solutions.The Bayesian-MCMC algorithm is implemented on the simulation radar sea-clutter data and the real radar seaclutter data.Reference data are assumed to be simulation data and refractivity profiles are obtained using a helicopter.The inversion algorithm is assessed（i） by comparing the estimated refractivity profiles from the assumed simulation and the helicopter sounding data;（ii） the one-dimensional（1D） and two-dimensional（2D） posterior probability distribution of solutions.
文摘The design of tunnels must be conducted based on the knowledge of the territory. The longer the structure, the larger the area to be investigated, and the greater the number of surveys and tests to be performed in order to thoroughly examine all the relevant features. Therefore, optimization of the investigation process is strongly required to obtain complete and reliable data for the design of the infrastructure. The fast development of remote sensing technologies and the affordability of their products have contributed to proving their benefits as supports for investigation, encouraging the spreading of automatic or semi-automatic methods for regional scale surveys. Similarly, considering the scale of the rock outcrop, photogrammetric and laser scanner techniques are well-established techniques for representing geometrical features of rock masses, and the benefits of non-contact surveys in terms of safety and time consumption are acknowledged. Unfortunately, in most cases, data obtained at different scales of investigations are only partially integrated or compared, probably due to the missing exchange of knowledge among experts of different fields（e.g. geologists and geotechnical engineers）. The authors,after experiencing such a lack of connection among the results of different surveys concerning tunnels,propose a multiscale approach for the optimization of the investigation process, starting from the regional scale, to obtain the data that can be useful not only for planning more detailed surveys in a preliminary phase, but also for making previsions on the discontinuity sets that are present in the rock masses subjected to excavations. A methodological process is proposed and illustrated by means of a case study. Preliminary results are discussed to highlight the potentiality of this method and its limitations.
文摘An improved topographic database for King George Island,one of the most frequently visited regions in Antarctica,is presented.A first step consisted in combining data from differential GPS surveys gained during the austral summers 1997～1998 and 1999～2000,with the current coastline from a SPOT satellite image mosaic,topographic information from existing maps and from the Antarctic Digital Database.From this data sets,a digital terrain model (DTM) was generated using Arc/Info GIS.In a second step,a satellite image map at the scale 1∶100 000 was assembled from contour lines derived from the DTM and the satellite mosaic.A lack of accurate topographic information in the eastern part of the island was identified.Additional topographic surveying or SAR interferometry should be used to improve the data quality in that area.The GIS integrated database will be indispensable for glaciological and climatological studies and administrative and scientific purposes.In future,the application of GIS techniques will be mandatory for environmental impact studies and environmental monitoring as well as for management plans on King George Island.
文摘Global geopotential models have not included the very high frequencies of the Earth’s external gravity field.This is called omission error.This omission error becomes more important in mountainous areas(areas with highly variable topography).The work reported here consists in reducing the omission error in measurements of Bouguer gravity anomalies,by refining the global geopotential model EGM2008 using the spectral enhancement method.This method consists in computing the residual terrain effects and then coupling them to the gravimetric signal of the global geopotential model.To compute the residual terrain effects,we used the Residual Terrain Model(RTM)technique.To refine it required a reference surface(ETOPO1)developed up to degree 2190(the maximum degree of the EGM2008 model)and a detailed elevation model(AW3D30).Computation was performed with the TC program of the GRAVSOFT package.The topography of the study area was assumed to have a constant density of 2670 kg/m3.For the inner and outer zones,the respective integration radii of 10 km and 200 km have been chosen.We obtained very important RTM values ranging from−53.59 to 34.79 mGal.These values were added to the gravity anomalies grid of the EGM2008 model to improve accuracy at high frequencies.On a part of the Cameroon Volcanic Line and its surroundings(mountainous area),we made a comparison between the residual Bouguer anomalies before and after refinement.We report differences ranging from−37.40 to 26.40 mGal.We conclude that the impact of omission error on gravimetric signatures is observed especially in areas with high variable topography,such as on the Cameroon Volcanic Line and around the localities of Takamanda,Essu,Dumbo,and Ngambe.This finding illustrates the great influence that topography has on accurate measurement of these gravity anomalies,and thus why topography must be taken into account.We can conclude that in preparing a global geopotential model,a high resolution DTM must be used to decrease the omission error:the degree of expansion has to increase in order to take the higher frequencies into account.The refined Bouguer anomalies grid presented here can be used in addition to terrestrial gravity anomalies in the study area,especially in mountainous areas where gravimetric data are very sparse or nonexistent.
